ZH
RU
ES
Tests against samples
Tests against samples, Total:98 items.
In the international standard classification, Tests against samples involves: Test conditions and procedures in general, Protection against electric shock, Electrical engineering in general, Reinforced plastics, Paints and varnishes, Non-destructive testing, Quality, Adhesives, Petroleum products in general, Analytical chemistry, Air quality, Construction materials, Sewing machines and other equipment for the clothing industry, Water quality, Microbiology, Inorganic chemicals, Paint ingredients, Fuels, Testing of metals, Environmental testing, Electrical and electronic testing, Medical equipment, Products of the textile industry, Plastics, Electronic components in general, Soil quality. Pedology, Welding, brazing and soldering, Protection against dangerous goods, Pipeline components and pipelines, Wood-based panels, Fibre optic communications, Road engineering, Document imaging applications.
Indonesia Standards, Tests against samples
ESDU - Engineering Sciences Data Unit, Tests against samples
- ESDU 91041 B-1993 The statistical analysis of data from Normal distributions@ with particular reference to small samples.
German Institute for Standardization, Tests against samples
- DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
- DIN EN 1067:2006 Adhesives - Examination and preparation of samples for testing; English version of DIN EN 1067:2006-03
- DIN 51554-1:1978 Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose, sampling, ageing
- DIN EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010); German version EN ISO 1513:2010
- DIN EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; English version of DIN EN 12504-1:2009-07
- DIN 66061-9:1972 Household sewing-machines; testing of loss of tensile strength of needle thread by sewing
- DIN EN 12504-1:2021 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; German version EN 12504-1:2019 + AC:2020
- DIN 38402-16:1987 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of sea water (A 16)
- DIN 38402-15:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of flowing waters (A 15)
- DIN 11868-3:2016-03 Sampling equipments on milk collecting tankers - Part 3: Minimum requirements for inspection authorities who carry out verifications or type verifications
- DIN 38411-1:1983 German standard methods for the examination of water, waste water and sludge; Microbiological methods (Group K); Preparation for the microbiological examination of water samples (K1)
- DIN 38402-20:1987 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of tidal waters (A 20)
- DIN 38402-12:1985 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from barrages and lakes (A 12)
- DIN 38402-14:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of untreated water and drinking water (A 14)
- DIN ISO 3951-1:2016 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2013); Text in German an
- DIN EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012); German version EN ISO 13632:2012
- DIN 38402-22:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of cooling water for industrial use (A 22)
- DIN 38402-11:1995 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 11: Sampling of waste water (A 11)
- DIN 51774-1:1975 Testing of liquid fuels; determination of bromine acceptance by electrometric Dead-Stop-method of samples with a bromine acceptance of more than 0,5 g/100 g (BA)
- DIN EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001
- DIN EN 444:1994 Non-destructive testing; general principles for the radiographic examination of metallic materials using X-rays and gamma-rays; German version EN 444:1994
- DIN 38414-11:1987 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); sampling of sediments (S 11)
- DIN ISO 3951-1:2023-10 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2022); Text in German...
- DIN 51774-2:1975 Testing of liquid fuels; determination of bromine acceptance by electrometric Dead-Stop-method of samples with a bromine acceptance up to 0,5 g/100 g (BB)
- DIN EN ISO 23908:2013 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011); German version EN ISO 23908:2013
- DIN 53891-2:1978 Testing of textiles; determination of crease resistance of textile fabrics by measuring the angle of recovery, method of vertical fold on the wet sample
- DIN 38402-18:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of water from mineral springs and spas (A 18)
- DIN EN ISO 15952:2011 Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2006); German version EN ISO 15952:2011
- DIN EN ISO 9016:2013 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012); German version EN ISO 9016:2012
- DIN CEN/TS 15397:2006-08 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test; German version CEN/TS 15397:2006
- DIN 38402-30:1998 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 30: Pretreatment, homogenization and aliquotation of non-homogeneous water samples (A 30)
- DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
- DIN EN ISO 20769-1:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018); German version EN ISO 20769-1:2018
- DIN EN ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018); German version EN ISO 20769-2:2018
- DIN EN 16407-1:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection; German version EN 16407-1:2014
- DIN EN 326-2 Corrigendum 1:2006 Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory Corrigendum 1 to English version of DIN EN 326-2:2000-10
- DIN EN 10253-2:2021 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements; German version EN 10253-2:2021
- DIN EN 12472:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2005+A1:2009
- DIN EN ISO 9016:2011 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2001); German version EN ISO 9016:2011
- DIN EN 61300-3-23:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface (IEC 61300-3-23:1998); German version EN 61300-3-23:1998
- DIN EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
- DIN EN 12697-7:2015 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2014
- DIN EN 12697-7:2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2002
- DIN 19051-2 Bb.2:2013 Test charts for micrography - Part 2: Fundamental assembly of typographical characters for legibility tests and test chart for destination of resolving power; Supplement 2: Test card for practical use in rotary cameras
- DIN EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO/FDIS 9016:2012); German version FprEN ISO 9016:2012
International Organization for Standardization (ISO), Tests against samples
- ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
- ISO 12418-2:2012 Plastics - Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates - Part 2: Preparation of test specimens and determination of properties
- ISO 6887-4:2017 Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of miscellaneous products
Association Francaise de Normalisation, Tests against samples
- NF T30-066*NF EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
- NF C93-903-34:1998 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-34 : examinations and measurements. Attenuation of random mated connectors.
- XP CEN/TS 15397:2006 Produits de préservation du bois - Méthode de préconditionnement naturel d'éprouvettes de bois traité, sans contact avec le sol, avant essai biologique en laboratoire
IT-UNI, Tests against samples
Danish Standards Foundation, Tests against samples
- DS/CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
AENOR, Tests against samples
- UNE-CEN/TS 15053:2006 IN Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
British Standards Institution (BSI), Tests against samples
- DD CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
- BS ISO 3951-1:2022 Tracked Changes. Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- 21/30409815 DC BS ISO 3951-1. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- BS 6002-1:2007 Sampling procedures for inspection by variables - Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- BS EN ISO 16000-11:2006 Indoor air - Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
- BS E9007:1975 Specification for harmonized system of quality assessment for electronic components: Basic specification: Sampling plans and procedures for inspection by attributes
- BS EN ISO 9016:2022 Tracked Changes. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
- BS EN 61300-3-34:2009 Fibre optic interconnecting
devices and passive components
— Basic test and measurement
procedures —
Part 3-34: Examinations and measurements —
Attenuation of random mated connectors
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tests against samples
- GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
- GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- GB/T 6378.4-2018 Sampling procedures for inspection by variables.Part 4:Procedures for assessment of declared quality levels for mean
- GB/T 6378.4-2008 Sampling procedures for inspection by variables.Part4:Procedures for assessment of declared quality levels for mean
- GB/T 18311.26-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-26: Examinations and measurements Measurement of the angular misalignment between fibre and ferrule axes
RO-ASRO, Tests against samples
- STAS 10156-1975 Paints and varhishes Examinations and preparation of samples for testing
SE-SIS, Tests against samples
BE-NBN, Tests against samples
卫生健康委员会, Tests against samples
- WS/T 640-2018 Collection and transportation of samples for clinical microbiology testing
CL-INN, Tests against samples
American Society for Testing and Materials (ASTM), Tests against samples
- ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM D2798-99(2004) Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite in a Polished Specimen of Coal
- ASTM D2798-21 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
- ASTM D2798-09 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
- ASTM C513-11 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
- ASTM D7284-13 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
- ASTM D7284-08 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
- ASTM D7284-08e1 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
- ASTM D6480-99 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
- ASTM D6480-05 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
AT-ON, Tests against samples
Korean Agency for Technology and Standards (KATS), Tests against samples
- KS Q ISO 3951-2:2019 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality char
KR-KS, Tests against samples
- KS Q ISO 3951-2-2019 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality char
- KS A ISO 3951-1-2008 Sampling procedures for inspection by variables－Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic a
Professional Standard - Commodity Inspection, Tests against samples
- SN/T 0952-2000 Sampling procedures for import and export commodity inspection-Estimation of nonconforming proportion and selection of sample size for isolated lot inspection by attributes (Apply to the case of large lot size)
Japanese Industrial Standards Committee (JISC), Tests against samples
- JIS C 0037:1997 Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
RU-GOST R, Tests against samples
- GOST 21397-1981 Non-destructive testing. Set of standard samples for ultrasonic testing semi-finished and aluminium alloy products. Specifications
VN-TCVN, Tests against samples
- TCVN 7011-9-2013 Test code for machine tools.Part 9: Estimation of measurement uncertainty for machine tool tests according to series TCVN 7011 (ISO 230), basic equations
Aerospace, Security and Defence Industries Association of Europe (ASD), Tests against samples
- ASD-STAN PREN 2004-10-1993 Aerospace Series Test Methods for Aluminium and Aluminium Alloy Products Part 10: Preparation of Micrographic Specimens for Aluminium Alloys (Edition P 1)