ZH
RU
ES

Instruments for Dynamic Analysis

Instruments for Dynamic Analysis, Total:419 items.

In the international standard classification, Instruments for Dynamic Analysis involves: Thermodynamics and temperature measurements, Coals, Analytical chemistry, Metrology and measurement in general, Industrial automation systems, Fuels, Nuclear energy engineering, Mechanical testing, Testing of metals, Fibre optic communications, Vibrations, shock and vibration measurements, Measurement of force, weight and pressure, Burners. Boilers, Environmental testing, Glass, Electrical equipment for working in special conditions, Medical sciences and health care facilities in general, Milk and milk products, Laboratory medicine, Organic chemicals, Earthworks. Excavations. Foundation construction. Underground works, Optics and optical measurements, Raw materials for rubber and plastics, Vibration and shock with respect to human beings, Rubber, Road engineering, Optical equipment, Microbiology, Sugar. Sugar products. Starch, Plant and equipment for the food industry, Linear and angular measurements, Acoustics and acoustic measurements, Company organization and management, Measurement of fluid flow, Mining equipment, Equipment for petroleum and natural gas industries, Capacitors, Paints and varnishes, Fluid power systems, Air quality, Pulps, Paper and board, Textile fibres, Fruits. Vegetables, Environmental protection, Rotating machinery, Radiation measurements, Petroleum products in general, Non-destructive testing, Rectifiers. Convertors. Stabilized power supply, Power transmission and distribution networks, Audio, video and audiovisual engineering, Water quality, Electromagnetic compatibility (EMC), Welding, brazing and soldering, Piezoelectric and dielectric devices, Plastics, Components for aerospace construction, Reinforced plastics, Motor cycles and mopeds, Test conditions and procedures in general, Aerospace electric equipment and systems, Radiation protection, Petroleum, petroleum products and natural gas handling equipment, Lubricants, industrial oils and related products, Construction of airports, Switchgear and controlgear, Domestic, commercial and industrial heating appliances.

GM Europe, Instruments for Dynamic Analysis

GME 16644-2011 Torque Accuracy Check on Dynamic Power Analyzer
GME16644-2011 脺berpr眉fung der Drehmomentgenauigkeit am Rollenpr眉fstand Torque Accuracy Check on Dynamic Power Analyzer Revision 1; English/German; Includes Appendix A

American Society for Testing and Materials (ASTM), Instruments for Dynamic Analysis

ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E3338-22 Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
ASTM E2254-18 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-13 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-08 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-11 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-03 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-23 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2425-16 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM E2425-05 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2425-21 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2425-11 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2254-09 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E854-98 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E854-14 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E854-03 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E854-03(2009) Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
ASTM E124-94(2010) Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM F3493-23 Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E1640-04 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-13(2018) Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E1640-99 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM UOP481-09 Water in Liquid Hydrocarbons and Heavy Hydrocarbons by Vaporizer, using Coulometric Titration
ASTM E854-19 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance
ASTM E854-14e1 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance
ASTM E3007-15 Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry
ASTM E1640-23 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D7681-11(2016)e1 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7681-11 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E50-90 Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM E50-82(1986) Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7971-15 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM D7919-14(2021) Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D7898-14 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis 40;FDA41; for Condition Monitoring of Machinery
ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM D8072-17 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
ASTM D8236-18 Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Ana
ASTM E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D7919-14 Standard Guide for Filter Debris Analysis 40;FDA41; Using Manual or Automated Processes
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM E50-00 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM E50-00(2005) Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6466-10(2018) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D6466-10 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM F311-08(2013) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM E498/E498M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM D7754-11 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
ASTM C1429-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM D7028-07 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7028-07e1 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM C1429-99(2004) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C1428-18(2023) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM E3346-22 Standard Guide for Combustion, Inert Gas Fusion and Hot Extraction Instruments for use in Analyzing Metals, Ores, and Related Materials
ASTM C1429-21 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C1428-99(2005) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM C1428-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM C1429-99(2009) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C1742-10 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method
ASTM C1429-99(2014) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C1913-21 Standard Practice for Sampling Gaseous Uranium Hexafluoride Using Zeolite in Single-Use Destructive Assay Sampler
ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D7028-07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D6624-06 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-01 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-12 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-14 Standard Practice for Determining a Flow-Proportioned Average Property Value &40;FPAPV&41; for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM C1428-11 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method

Professional Standard - Electricity, Instruments for Dynamic Analysis

DL/T 1030-2006 Test methods for proximate analysis of coal by automatic instrumental procedure

International Organization for Standardization (ISO), Instruments for Dynamic Analysis

ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6145-7:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 18075:2018 Steady-state neutronics methods for power-reactor analysis
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 6145-4:2004 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
ISO 17123-8:2007 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO 17123-8:2015 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO 6145-6:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 6 : Sonic orifices
ISO 6145-10:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 9022-16:1994 Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration, in dry heat or cold
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 6145-4:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 4 : Continuous injection method
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 18436-4:2008 Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 4: Field lubricant analysis
ISO 6145-9:2001/Cor 1:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method; Technical Corrigendum 1
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6721-10:1999 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 6721-10:2015 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 13232-4:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures
ISO 13232-4:1996 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures
ISO/CD 6721-10:2023 Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer
ISO 9022-15:1994 Optics and optical instruments - Environmental test methods - Part 15: Combined random vibration wide band; reproducibility medium, in dry heat oder cold

Institute of Environmental Sciences and Technology, Instruments for Dynamic Analysis

IEST RD-DTE046.1-2011 Terms Commonly Used in the Digital Analysis of Dynamic Data

ANS - American Nuclear Society, Instruments for Dynamic Analysis

19.3-2011 Steady-state neutronics methods for power reactor analysis

British Standards Institution (BSI), Instruments for Dynamic Analysis

BS ISO 18075:2018 Steady-state neutronics methods for power-reactor analysis
BS PD IEC/TR 62343-6-6:2017 Dynamic modules. Design guide. Failure mode effect analysis for optical units of dynamic modules
BS ISO 13373-2:2016 Tracked Changes. Condition monitoring and diagnostics of machines. Vibration condition monitoring. Processing, analysis and presentation of vibration data
BS 7935-2:2004 Constant amplitude force calibration - Calibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems - Method
BS ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
BS 1428-D1:1965 Microchemical apparatus - Volumetric analysis - Specification for burettes with pressure-filling device and automatic zero
BS EN ISO 6145-4:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Continuous syringe injection method
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS ISO 15671:2000 Rubber and rubber additives - Determination of total sulfur content using an automatic analyser
BS ISO 15672:2000 Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser
BS ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
23/30453826 DC BS EN IEC 61577-6. Radiation protection instrumentation. Radon and radon decay product measuring instruments - Part 6. Passive integrating radon measurement systems using solid-state nuclear track detectors
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS ISO 248-2:2019 Tracked Changes. Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS EN 62343-1-3:2006 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C)
BS EN IEC 61207-2:2019 Expression of performance of gas analyzers - Measuring oxygen in gas utilizing high-temperature electrochemical sensors
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
PD IEC TR 61292-2:2003 Optical amplifier technical reports. Theoretical background for noise figure evaluation using the electrical spectrum analyzer
BS 1902 Sec.9.1:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
BS 1902 Sec.9.2:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
BS ISO 13232-4:2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Variables to be measured, instrumentation and measurement procedures
BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS 1016 Sec.107.3:1990 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of swelling properties using a dilatometer
18/30372377 DC BS EN ISO 21597-2. Information container for data drop. Exchange specification. Part 2. Dynamic semantics
BS EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
BS EN 50598-1:2014 Ecodesign for power drive systems, motor starters<(>,<)> power electroni cs & their driven applications. General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic mo
BS PD CEN/TS 15901-14:2016 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
BS EN 61800-5-1:2007+A11:2021 Adjustable speed electrical power drive systems. Ecodesign for power drive systems, motor starters, power electronics and their driven applications. General requirements for setting energy efficiency standards for power driven equipment using the extended
BS EN 61800-9-1:2017 Adjustable speed electrical power drive systems. Ecodesign for power drive systems, motor starters, power electronics and their driven applications. General requirements for setting energy efficiency standards for power driven equipment using the extended
BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances
BS EN 60444-5:1997 Measurement of quartz crystal unit parameters. Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
BS EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1:Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

Korean Agency for Technology and Standards (KATS), Instruments for Dynamic Analysis

KS L 2301-2015 Testing method of glass apparatus for chemical analysis
KS L 2301-2010 Testing method of glass apparatus for chemical analysis
KS L 2301-1978 Testing method of glass apparatus for chemical analysis
KS L 2302-2017(2022) Shape and dimension of glass apparatus for chemical analysis
KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS D ISO 17974-2011(2021) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 17974-2011(2016) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 17974:2011 Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS I ISO 6145-4:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 4:Continuous syringe injection method
KS I ISO 6145-4-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-4:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-7-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS B ISO 8041-1:2019 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters
KS I ISO 6145-10:2008 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 10:Permeation method
KS I ISO 6145-10:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 10：Permeation method
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS C IEC 61207-2-2014(2019) Expression of performance of gas analyzers — Part 2: Oxygen in gas(utilizing high-temperature electrochemical sensors)
KS C IEC 61290-3-2-2005(2020) Optical amplifiers－Part 3－2：Test methods for noise figure parameters－Electrical spectrum analyzer method
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS C IEC 60444-5:2016 Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
KS M ISO 6721-10-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
KS B ISO 9022-16:2002 Optics and optical instruments－Environmental test methods－Part 16：Combined bounce or steady－state acceleration and dry heat or cold
KS C IEC 61290-10-2:2005 Optical amplifiers－Test methods－Part 10－2：Multichannel parameters－Pulse method using a gated optical spectrum analyzer
KS C IEC 61290-10-1:2005 Optical amplifiers－Test methods－Part 10－1：Multichannel parameters－Pulse method using an optical switch and optical spectrum analyzer
KS C IEC 61800-9-2:2020 Adjustable speed electrical power drive systems —Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications — Energy efficiency indicators for power d
KS M ISO 11907-4-2004(2019) Plastics－Smoke generation－Determination of the corrosivity of fire effluents－Part 4：Dynamic decomposition method using a conical radiant heater
KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods－Part 5－3：Test methods for reflectance parameters－Reflectance tolerance using an electrical spectrum analyser
KS B 0713-1-2012 Methods for the calibration of vibration and shock pick-ups－Part 1：Primary vibration calibration by laser interferometry
KS C IEC 60444-5-2016(2021) Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction

Association Francaise de Normalisation, Instruments for Dynamic Analysis

NF A06-725:1992 Analyse chimique du cuivre - Dosage de l'oxygène - Méthode instrumentale.
NF E90-373-2*NF ISO 13373-2:2016 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data
NF ISO 17974:2009 Analyse chimique des surfaces - Spectromètres d'électrons Auger à haute résolution - Étalonnage des échelles d'énergie pour l'analyse élémentaire et de l'état chimique
NF ISO 13373-2:2016 Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 2 : traitement, analyse et présentation des données vibratoires
NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF X20-205-4*NF EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4 : continuous syringe injection method.
NF EN ISO 6145-4:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 4 : méthode continue par seringue d'injection
NF E90-403-1*NF EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1 : general purpose vibration meters
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF C93-344-1-2:2008 Dynamic modules - Part 1-2 : performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C).
NF EN ISO 6145-8:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 8 : méthode par diffusion
NF EN ISO 6145-9:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 9 : méthode par saturation
NF EN ISO 6145-10:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 10 : méthode par perméation
NF X20-205-10*NF EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10 : permeation method
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF EN 60444-5:2001 Mesure des paramètres des résonateurs à quartz - Partie 5 : méthodes pour la détermination des paramètres électriques équivalents utilisant des analyseurs automatiques de réseaux et correction des erreurs
NF C93-344-1-3:2007 Dynamic modules - Part 1-3 : performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environment (Category C)
NF EN 50598-3:2015 Écoconception des entraînements électriques de puissance, des démarreurs de moteur, de l'électronique de puissance et de leurs applications entraînées - Partie 3 : approche quantitative d'écoconception par l'évaluation du cycle de vie, comp...
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF EN ISO 6145-6:2017 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 6 : orifices de débit critiques
NF C53-598-1:2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1 : general requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analyti
NF C46-270-4*NF EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Part 4 : dissolved oxygen in water measured by membrane covered amperometric sensors
NF C46-251-2*NF EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2 : measuring oxygen in gas utilizing high-temperature electrochemical sensors
NF EN IEC 61207-2:2019 Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2 : mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF EN IEC 60746-4:2019 Expression des qualités de fonctionnement des analyseurs électrochimiques - Partie 4 : oxygène dissous dans l'eau mesuré par des capteurs ampérométriques recouverts d'une membrane
NF EN 17389:2020 Émissions de sources fixes - Procédures d'assurance qualité et de contrôle qualité applicables aux analyseurs automatiques pour la surveillance des systèmes de dépoussiérage
NF C93-805-10-4*NF EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4 : multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
NF EN 61290-10-4:2007 Amplificateurs optiques - Méthodes d'essai - Partie 10-4 : paramètres à canaux multiples - Méthode par soustraction de source interpolée en utilisant un analyseur de spectre optique
NF EN 15433-6:2016 Charges de transport - Mesurage et analyse des charges mécaniques dynamiques - Partie 6 : systèmes d'enregistrement automatiques pour la mesure de choc aléatoire intervenant durant le suivi de transports
NF C93-805-10-2:2003 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.
NF C93-805-10-2*NF EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer
NF X43-016:1977 Method for the determination of an acid gas pollution index(expressed as SO2 equivalent)using a continuous sampling automatic sequential analyser.
NF EN 60444-11:2011 Mesure des paramètres des résonateurs à quartz - Partie 11 : méthode normalisée pour la détermination de la fréquence de résonance à la charge fL et de la capacité de charge efficace CLeff utilisant des analyseurs automatiques de réseaux et ...
NF C53-598-2:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 2 : energy efficiency indicators for power drive systems and motor starters
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF M88-800:1990 LIQUEFIED HYDROCARBONS SYSTEMS IN CONTAINERS. HEATING EQUIPMENT FOR ABSORPTION REFRIGERATORS USING LIQUEFIED PETROLEUM GAS FOR MOBILE OR SEMI-MOBILE VEHICLES. DESIGN. TESTS.
NF EN 15859:2010 Qualité de l'air - Certification des analyseurs automatiques pour la surveillance des systèmes de réduction des poussières à l'émission des sources fixes - Spécifications de performance et modes opératoires d'essai
NF EN 61290-5-3:2002 Amplificateurs à fibres optiques - Spécification de base - Partie 5-3 : méthodes d'essai des paramètres de réflectance - Tolérance de réflectance en utilisant un analyseur de spectre électrique
NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
NF C53-240-9-2*NF EN 61800-9-2:2018 Adjustable speed electrical power drive systems - Part 9-2 : ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters

Society of Automotive Engineers (SAE), Instruments for Dynamic Analysis

SAE AIR1823A-2003 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

SAE - SAE International, Instruments for Dynamic Analysis

SAE AIR1823B-2011 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

国家市场监督管理总局、中国国家标准化管理委员会, Instruments for Dynamic Analysis

GB/T 25917.2-2019 Uniaxial fatigue testing systems—Part 2: Dynamic calibration device (DCD) instrumentation
GB/T 20996.3-2020 Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 3: Dynamic conditions
GB/T 22394.2-2021 Condition monitoring and diagnostics of machines—Data interpretation and diagnostics techniques—Part 2：Data-driven applications
GB/T 12668.902-2021 Adjustable speed electrical power drive systems—Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications—Energy efficiency indicators for power drive systems and motor starters

International Electrotechnical Commission (IEC), Instruments for Dynamic Analysis

IEC TR 62343-6-6:2011 Dynamic modules - Part 6-6: Failure mode effect analysis for optical units of dynamic modules
IEC TR 60079-16:1990 Electrical apparatus for explosive gas atmospheres; part 16: artificial ventilation for the protection of analyzer(s) houses
IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors
IEC TR 61292-2:2003 Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer
CISPR 14-1 INT 2-2017 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-1 Edition 5.2-2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-1-2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-1 INT 1-2017 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
IEC 60746-4:1992 Expression of performance of electrochemical analyzers; part 4: dissolved oxygen in water measured by membrane covered amperometric sensors
IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
IEC 61290-10-1:2003 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
IEC 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyser
CISPR 14-1 AMD 2-2011 AMENDMENT 2 Electromagnetic compatibility.Requirements for household appliances, electric tools and similar apparatus.Part 1: Emission
CISPR 14-1-2011 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 1: Emission
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
IEC 61800-9-2:2017 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power
IEC 61800-9-1:2017 Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy
IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer

KR-KS, Instruments for Dynamic Analysis

KS B ISO 13373-2-2017 Condition monitoring and diagnostics of machines —Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
KS B ISO 13373-2-2022 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS B ISO 8041-1-2019 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters
KS M ISO 6721-10-2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
KS C IEC 61800-9-2-2020 Adjustable speed electrical power drive systems —Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications — Energy efficiency indicators for power d
KS C IEC 60444-5-2016 Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction

German Institute for Standardization, Instruments for Dynamic Analysis

DIN ISO 13373-2:2016-11 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016)
DIN 12836-3:1975 Apparatus for dairy analyses; milk butyrometer 0 to 10 %, calibrated
DIN 10280:1973-08 Apparatus for dairy analysis; Mojonnier type extraction flask for the determination of fat content
DIN EN ISO 8041-1:2017-10 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017); German version EN ISO 8041-1:2017
DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
DIN EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009); German version EN ISO 6145-7:2010
DIN EN 137100:1998 Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN EN ISO 6145-4:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); German version EN ISO 6145-4:2008
DIN IEC 62495:2011 Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube (IEC 62495:2011)
DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
DIN EN IEC 61207-2:2021-03 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (IEC 61207-2:2019); German version EN IEC 61207-2:2019 / Note: DIN EN 61207-2 (1995-02) remains valid alongside this standar...
DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
DIN EN 61290-10-4:2008-02 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007 / Note: Applies in conjunction with DIN EN 61291...
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN EN 50598-1:2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
DIN IEC 60746-4:1996 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors (IEC 60746-4:1992)
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN 51819-3:2005 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing
DIN EN ISO 15616-2:2003-05 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Instruments for Dynamic Analysis

ASHRAE 3758-1994 Dynamic Model of a Multizone VAV System for Control Analysis
ASHRAE 4035-1997 Performance of Electric Power Meters and Analyzers in Adjustable-Speed Drive Applications (RP-770)

ESDU - Engineering Sciences Data Unit, Instruments for Dynamic Analysis

ESDU 97032-1997 Static aeroelasticity: a formal analysis using assumed modes.
ESDU 99033-1999 Static aeroelasticity: a formal analysis using normal modes.

CEN - European Committee for Standardization, Instruments for Dynamic Analysis

EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

European Committee for Standardization (CEN), Instruments for Dynamic Analysis

EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
EN 12442-1:2000 Animal Tissues and Their Derivatives Utilized in the Manufacture of Medical Devices - Part 1: Analysis and Management of Risk

未注明发布机构, Instruments for Dynamic Analysis

BS 7935-2:2004(2010) Constant amplitude force calibration — Part 2 : Calibration of the calibration device instrumentation to be used for the dynamic calibration of non - resonant uniaxial dynamic testing systems — Method
BS EN ISO 6145-4:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4 : Continuous syringe injection method
BS EN 50598-2:2014+A1:2016 Ecodesign for power drive systems, motor starters, power electronics & their driven applications Part 2 : Energy efficiency indicators for power drive systems and motor starters

BE-NBN, Instruments for Dynamic Analysis

NBN T 03-254-1980 Liquid chlorine for industrial use - Determination of water content using an electrolytic analyser
NBN C 97-111-1973
NBN T 52-020-1990 Analyse van vloeibare aardoliekoolwaterstoffen - Gaschromatografische analyse - Bepaling van deorganische zuurstofverbindingen en van de organisch gebonden zuurstof met behulp van een zuurstof-specifieke detector (O-FID)

CZ-CSN, Instruments for Dynamic Analysis

CSN 70 4240-1967 Glass apparatus and elements for analysis of technical iron. Common regulations

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Instruments for Dynamic Analysis

GB/T 12155-1989 Analysis of water used in boiler and cooling system--Determination for sodium--Dynamic method
GB/T 5275.5-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 5:Capillary calibration devices
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers
GB 3241-1982 Octave and third-octave band filters used for the analysis of sound and vibration
GB/T 31836-2015 Radiation protection instrumentation.Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
GB 12668.902-2021 Speed-regulated electrical drive systems Part 9-2: Ecological design of electrical drive systems, motor starters, power electronic equipment and their drive applications Energy efficiency indicators for electrical drive systems and motor starters

Japanese Industrial Standards Committee (JISC), Instruments for Dynamic Analysis

JIS K 0166:2011 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis
JIS K 6238-2:2009 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric method using automatic analyzer with infrared drying
JIS L 1030-3-1:2023 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 3-1: Instrumental analysis of some animal hair fibres -- Using MALDI-TOF MS testing methods for quantitative analysis of fibre mixtures
JIS C 1513:2002 Octave-band and third-octave-band analyzers for sounds and vibrations
JIS B 8574:2013 LPG dispensers for motor vehicles.Measuring instruments used in transaction or certification
JIS B 7912-8:2010 Field procedures for testing geodetic and surveying instruments -- Part 8: GNSS (RTK)
JIS C 6122-10-2:2010 Optical amplifiers -- Test methods -- Part 10-2: Multichannel parameters -- Pulse method using a gated optical spectrum analyzer
JIS C 6122-10-1:2007 Optical amplifiers -- Test methods -- Part 10-1: Multichannel parameters -- Pulse method using an optical switch and optical spectrum analyzer
JIS C 6122-10-4:2012 Optical amplifiers -- Test methods -- Part 10-4: Multichannel parameters -- Interpolated source subtraction method using an optical spectrum analyzer
JIS B 8572-1:2008 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 1: Fuel dispensers for motor vehicles

RU-GOST R, Instruments for Dynamic Analysis

GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis
GOST R ISO 13373-2-2009 Condition monitoring and diagnostics of machines. Vibration condition monitoring. Part 2. Processing, analysis and presentation of vibration data
GOST R IEC 61241-1-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus
GOST R 55991.7-2014 In vitro diagnostics medical devices. Part 7. Automatic analyzers for general clinical tests. Technical requirements for public procurement
GOST R 55991.1-2014 In vitro diagnostics medical devices. Part 1. Automatic analyzers for biochemical assays. Technical requirements for public procurement
GOST R 55991.2-2014 In vitro diagnostics medical devices. Part 2. Automatic analyzer for immunoassays. Technical requirements for public procurement
GOST R 55991.4-2014 In vitro diagnostics medical devices. Part 4. Automatic analyzers for coagulation tests. Technical requirements for public procurement
GOST R 55991.3-2014 In vitro diagnostics medical devices. Part 3. Automatic analyzers for biomolecular assays. Technical requirements for public procurement
GOST R 55991.6-2014 In vitro diagnostics medical devices. Part 6. Automatic analyzers for hematology tests. Technical requirements for public procurement
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 27543-1987 Confectionery. Equipment, materials, reagents and culture media for microbiological analyses
GOST R IEC 61241-3-1999 Electrical apparatus for use in the presence of combustible dust. Part 3. Classification of areas
GOST 25615-1983 Automatic gas analyzer for coal mine. General technical requirements
GOST 30852.15-2002 Electrical apparatus for explosive gas atmospheres. Part 16. Artificial ventilation for the protection of analyzer(s) houses
GOST R 55991.5-2014 In vitro diagnostics medical devices. Part 5. Automatic analyzers for blood gas, metabolite and acid-base balance assessment. Technical requirements for public procurement
GOST R IEC 61241-18-2009 Electrical apparatus for use in the presence of combustible dust. Part 18. Protection by encapsulation «mD»
GOST R IEC 61241-14-2008 Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
GOST R ISO 13373-1-2009 Condition monitoring and diagnostics of machines. Vibration condition monitoring. Part 2. General procedures
GOST R 57950-2017 Plastics. Determination of dynamic mechanical properties. Part 10. Complex shear viscosity using a parallel-plate oscillatory rheomete

IN-BIS, Instruments for Dynamic Analysis

IS 12275-1987

ES-UNE, Instruments for Dynamic Analysis

UNE-EN ISO 8041-1:2018 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (Endorsed by Asociación Española de Normalización in October of 2019.)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
UNE-EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification -- Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser. (Endorsed by AENOR in October of 2002.)
UNE-EN 61800-9-2:2017 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters (Endorsed by Asocia...

Standard Association of Australia （SAA）, Instruments for Dynamic Analysis

AS/NZS 3580.15:2014

Danish Standards Foundation, Instruments for Dynamic Analysis

DS/EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/EN 62343-1-2:2008 Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)
DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
DS/EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
DS/EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
DS/EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
DS/EN 60444-5:1998 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction

ES-AENOR, Instruments for Dynamic Analysis

UNE 118-002-1991

CENELEC - European Committee for Electrotechnical Standardization, Instruments for Dynamic Analysis

EN 62343-1-2:2008 Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)
EN 62343-1-3:2006 Dynamic modules Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C)
EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer

PL-PKN, Instruments for Dynamic Analysis

PN G04514-17-1993 Solid fuel. Determination of sulphur. Determination of sulphur by using automatic analysers

Professional Standard - Agriculture, Instruments for Dynamic Analysis

GB 3241-1998 1/1 and 1/3 octave filters for sound and vibration analysis

Professional Standard - Machinery, Instruments for Dynamic Analysis

JB/T 7861-1995 1/1 and 1/3 octave filters for sound and vibration analysis
JB/T 5457-1991 Specifications for 1/1 and 1/3 octave band filters for sound and vibration analysis

ZA-SANS, Instruments for Dynamic Analysis

SANS 60079-16:1990 Electrical apparatus for explosive gas atmospheres Part 16: Artificial ventilation for the protection of analyzer(s) houses

AENOR, Instruments for Dynamic Analysis

UNE-EN 61207-2:2002 Expression of performance of gas analyzers -- Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors).
UNE-EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
UNE-EN 50598-1:2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
UNE 21328-4:1975 OCTAVE HALF OCTAVE AND A THIRD OCTAVE BAND FILTERS USED IN NOISES AND VIBRATIONS ANALYSIS.
UNE-EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)

AGMA - American Gear Manufacturers Association, Instruments for Dynamic Analysis

93FTM10-1993 High Speed@ Heavily Loaded and Precision Aircraft Type Epicyclic Gear System Dynamic Analysis by Using AGMA Gear Design Guidelines Enhanced by Exact Definition of Dynamic Loads

Indonesia Standards, Instruments for Dynamic Analysis

SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation

European Committee for Electrotechnical Standardization（CENELEC）, Instruments for Dynamic Analysis

EN 60444-5:1997 Measurement of Quartz Crystal Unit Parameters Part 5: Methods for the Determination of Equivalent Electrical Parameters Using Automatic Network Analyzer Techniques and Error Correction
EN 50598-1:2014 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
EN 50598-2:2014 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters
EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
EN 61800-9-2:2017 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems@ motor starters@ power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters

Lithuanian Standards Office , Instruments for Dynamic Analysis

LST EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
LST EN 62343-1-2-2008 Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C) (IEC 62343-1-2:2007)
LST EN 62343-1-3-2007 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C) (IEC 62343-1-3:2006)
LST EN 50598-1-2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
LST EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
LST EN 61207-2-2001 Expression of performance of gas analyzers. Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994 + corrigendum 1994)
LST EN 61290-10-2-2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007)
LST EN 61290-10-4-2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007)

American National Standards Institute （ANSI), Instruments for Dynamic Analysis

ANSI/TAPPI T271 om-2012 Fiber length of pulp and paper by automated optical analyzer using polarized light

European Association of Aerospace Industries, Instruments for Dynamic Analysis

AECMA PREN 3475-501-2005 Aerospace Series Cable, Electrical, Aircraft Use Test Methods Part 501: Dynamic Cut-Through Edition P 2
AECMA PREN 3475-501-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 501 - Dynamic Cut-Through Issue P 1

US-CFR-file, Instruments for Dynamic Analysis

CFR 40-1065.269-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.269:Photoacoustic analyzer for ethanol and methanol.

American Society of Mechanical Engineers (ASME), Instruments for Dynamic Analysis

ASME N-693-2001 Alternative Method to the Requirements of NB-3228.6 for Analyzing Piping Subjected to Reversing Dynamic Loads Section III, Division 1; (SUPP 10)

Institute of Electrical and Electronics Engineers (IEEE), Instruments for Dynamic Analysis

IEEE 1623-2020 IEEE Guide for the Functional Specification of Medium Voltage (1kV to 35kV) Electronic Shunt Devices for Dynamic Voltage Compensation
IEEE Std 1623-2020 IEEE Guide for the Functional Specification of Medium Voltage (1kV to 35kV) Electronic Shunt Devices for Dynamic Voltage Compensation

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Instruments for Dynamic Analysis

GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Association of German Mechanical Engineers, Instruments for Dynamic Analysis

VDI 2453 Blatt 2-2002 Gaseous air pollution measurement - Measurement of concentration of nitrogen monoxide and nitrogen dioxide - Calibration of NO/NOx chemiluminescence analysers using gas phase titration

European Telecommunications Standards Institute (ETSI), Instruments for Dynamic Analysis

ETSI TS 101 952-4-2012 Access, Terminals, Transmission and Multiplexing (ATTM); Access network xDSL splitters for European deployment; Part 4: Specification for dynamic distributed filters for xDSL over POTS

The American Road & Transportation Builders Association, Instruments for Dynamic Analysis

AASHTO T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) HM-22; Part IIB; Formaly AASHTO TP 5

Aerospace, Security and Defence Industries Association of Europe (ASD), Instruments for Dynamic Analysis

ASD-STAN PREN 3475-501-2005 Aerospace Series Cable, Electrical, Aircraft Use Test Methods Part 501: Dynamic Cut-Through (Edition P 2)

ETSI - European Telecommunications Standards Institute, Instruments for Dynamic Analysis

TS 101 952-4-2012 Access@ Terminals@ Transmission and Multiplexing (ATTM); Access network xDSL splitters for European deployment; Part 4: Specification for dynamic distributed filters for xDSL over POTS

American Gear Manufacturers Association, Instruments for Dynamic Analysis

AGMA 93FTM10-1993 High Speed, Heavily Loaded and Precision Aircraft Type Epicyclic Gear System Dynamic Analysis by Using AGMA Gear Design Guidelines Enhanced by Exact Definition of Dynamic Loads

WRC - Welding Research Council, Instruments for Dynamic Analysis

BULLETIN 229-1977 DYNAMIC FRACTURE-RESISTANCE TESTING AND METHODS FOR STRUCTURAL ANALYSIS ; JUNCTION STRESSES FOR A CONICAL SECTION JOINING CYLINDERS OF DIFFERENT DIAMETER SUBJECT TO INTERNAL PRESSURE