ZH
RU
ES

How to Test Resilience

How to Test Resilience, Total:233 items.

In the international standard classification, How to Test Resilience involves: Testing of metals, Powder metallurgy, Textile fibres, Cutting tools, Construction materials, Ceramics, Products of the textile industry, Continuous handling equipment, Sports equipment and facilities, Welding, brazing and soldering, Materials for the reinforcement of composites, Non-ferrous metals, Materials for aerospace construction, Wood, sawlogs and sawn timber, Rubber, Rubber and plastics products, Plastics, Non-textile floor coverings, Products of non-ferrous metals, Waxes, bituminous materials and other petroleum products, Mechanical testing, Pipeline components and pipelines, Test conditions and procedures in general, Reinforced plastics, Road engineering.

CZ-CSN, How to Test Resilience

CSN 67 3150 Cast.08-1975 Flexibility test
CSN 80 0220-1969 Testing of flexibility of ba?t fibres
CSN 34 7170-1965 Insulation pliability testing. Wires. Conductors for winding.
CSN 64 0125-1953
CSN 34 7191-1965 Insulation pliability testing of strips. Conductors for winding.
CSN 64 0124-1953

CH-SNV, How to Test Resilience

SEV 0106-1934

PT-IPQ, How to Test Resilience

NP 148-1958

FI-SFS, How to Test Resilience

International Organization for Standardization (ISO), How to Test Resilience

ISO 28079:2009 Hardmetals - Palmqvist toughness test
ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO 12135:2002/Cor 1:2008 Metallic materials — Unified method of test for the determination of quasistatic fracture toughness TECHNICAL CORRIGENDUM 1
ISO 26843:2015 Metallic materials - Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces

IPC - Association Connecting Electronics Industries, How to Test Resilience

IPC TM-650 5.5.2.1-1998 Test Method 2.6.18 - Low Temperature Flexibility
IPC 9204-2017 Guideline on Flexibility and Stretchability Testing for Printed Electronics

Indonesia Standards, How to Test Resilience

SNI 08-1111-1989 Test method for fineneas of flax fibre
SNI 0276-2009

SE-SIS, How to Test Resilience

MNC 328-1990 Metallic materials — Testing — Impact toughness — Summary

Korean Agency for Technology and Standards (KATS), How to Test Resilience

KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
KS L 6520-1988(1998) TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
KS L 6520-1986 TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness

German Institute for Standardization, How to Test Resilience

DIN EN ISO 703:2017-06 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017); German version EN ISO 703:2017
DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
DIN EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
DIN CEN/TS 14425-1:2003-11 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010); German version EN ISO 15653:2010
DIN EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
DIN EN 6033:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
DIN EN 3102:2013-05 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
DIN EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013

IN-BIS, How to Test Resilience

IS 13826 Pt.2-1993 Bitumen based felt. Methods of test. Part 2: Pliability test
IS 12657-1989
IS 101 Pt.5/Sec.2-1988

American Society for Testing and Materials (ASTM), How to Test Resilience

ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-01 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
ASTM C711-93(1997) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C711-03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C711-14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM F911-85(1994) Standard Test Method for Flexibility of Running Shoes (Withdrawn 2002)
ASTM F2031-05 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-00 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-05(2010) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-05(2014) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM E1290-99 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E1290-08 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM D7779-11 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E399-12 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E1290-02e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1290-02 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM F137-08(2018) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM D2861-87(1998) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM C1421-15 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E1221-96 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1221-96(2002) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM F2136-01e1 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2136-18 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM A350/A350M-17 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-04 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-04a Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-00b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-02 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-02a Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-00c Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A350/A350M-97 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM E1221-12 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM A350/A350M-18 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM A350/A350M-15 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM E1221-06 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

AR-IRAM, How to Test Resilience

IRAM 1547-1948

PL-PKN, How to Test Resilience

PN H04335-1987 Metals Test method for piane — strain fracture toughness
PN H04336-1988 Metals Test method of fracture toughness by measurement critic value J integral, Jlc

Japanese Industrial Standards Committee (JISC), How to Test Resilience

JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS Z 2284:1998 Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium

Association Francaise de Normalisation, How to Test Resilience

NF EN ISO 17235:2016 Cuir - Essais physiques et mécaniques - Détermination de la souplesse
NF G07-307:1987 Textiles - Essais des fibres - Détermination de la ténacité de rupture des faisceaux de fibres de laine.
NF EN 3102:2014 Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température
NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
NF T54-110:1971 Plastics. Thin sheets. Determination of pliability limit temperature.(looped test piece impact test).
NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
NF L17-099*NF EN 3102:2014 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
NF EN 12964:2001 Adhésifs pour cuir et matériaux pour articles chaussants - Adhésifs à haute ténacité - Contrôle de la résistance à la chaleur des joints à une température élevée
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN ISO 23146:2016 Céramiques techniques - Méthodes d'essai pour la détermination de la ténacité à la rupture des céramiques monolithiques - Méthode sur éprouvette à entaille en V sur une seule face (Méthode SEVNB)
NF L17-924*NF EN 4504:2017 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
NF EN 4504:2017 Série aérospatiale - Matériaux non-métalliques, textiles - Méthode d'essai - Détermination de la flexibilité des tissus étroits
NF EN ISO 24370:2023 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette entaillée en chevron
NF L17-025*NF EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I GIC
NF L17-026*NF EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
NF EN 6033:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode I - GIC
NF EN 6034:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC

Lithuanian Standards Office , How to Test Resilience

LST EN ISO 703:2007 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2007)
LST EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
LST EN 14425-3-2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method

WRC - Welding Research Council, How to Test Resilience

BULLETIN 266-1981 WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 1: WELD SIMULATION TESTING ; WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 2: WIDE PLATE TESTING
BULLETIN 279-1982 WELDABILITY AND FRACTURE TOUGHNESS OF QUENCHED AND TEMPERED 9% NICKEL STEEL: PART I – WELD SIMULATION TESTING; AND PART II – WIDE PLATE TESTING
BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

YU-JUS, How to Test Resilience

JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)

British Standards Institution (BSI), How to Test Resilience

BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
BS 903-A13:1990 Physical testing of rubber - Method for determination of stiffness at low temperature (Gehman test)
BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
17/30290146 DC BS ISO 18485. Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
BS ISO 20064:2019 Metallic materials. Steel. Method of test for the determination of brittle crack arrest toughness, K_ca
BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
15/30293838 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
20/30394397 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2018 Tracked Changes. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
BS ISO 26843:2015 Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS 7448-1:1991 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
BS EN ISO 10619-1:2018 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
BS DD CEN/TS 14425-3:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3:Chevron notched beam (CNB) method
BS DD CEN/TS 14425-3:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS DD CEN/TS 14425-5:2004 Advanced technical ceramics-Test methods for determination of fracture toughness of monolithic ceramics-Part 5:Single-edge vee-notch beam (SEVNB) method
BS DD CEN/TS 14425-5:2005 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS EN ISO 10619-2:2021 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
DD CEN/TS 14425-5:2004 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method

The Aluminum Association, How to Test Resilience

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to Test Resilience

PREN 3102-1996 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility
PREN 4504-1999 Aerospace Series Textiles Test Method Determination of Flexibility of Narrow Fabrics
PREN 4504-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Flexibility of Narrow Fabrics (Edition P 1)

American National Standards Institute （ANSI), How to Test Resilience

ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ANSI/ASTM D2861:1998 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics

CU-NC, How to Test Resilience

NC 40-155-1988 Textile Industry. Determination of Tensile-Breaking Strength and Toughness of Threads in Hanks. Testing Method

IT-UNI, How to Test Resilience

CEN - European Committee for Standardization, How to Test Resilience

EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds

European Committee for Standardization (CEN), How to Test Resilience

EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
EN 843-7:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
PD CEN/TS 14425-3:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method
PD CEN/TS 14425-1:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1:Guide to test method selection
EN 843-8:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests

Danish Standards Foundation, How to Test Resilience

DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
DS/CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection
DS/EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method

ES-UNE, How to Test Resilience

UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
UNE-EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility (Endorsed by AENOR in April of 2013.)
UNE-EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
UNE-EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC (Endorsed by AENOR in January of 2016.)
UNE-EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC (Endorsed by AENOR in January of 2016.)

国家市场监督管理总局、中国国家标准化管理委员会, How to Test Resilience

GB/T 1927.17-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength
GB/T 38769-2020 Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces

American Welding Society (AWS), How to Test Resilience

WRC 279:1982 Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation Testing
WRC 266:1981 Part 1: Weldability and Fracture Toughness of 5% Ni Steel-Part 1: Weld Simulation Testing

RU-GOST R, How to Test Resilience

GOST 25.506-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST R 55033-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature

未注明发布机构, How to Test Resilience

BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS 7448-1:1991(2002) Fracture mechanics toughness tests — Part 1 : Method for determination of KIc, critical CTOD and critical J values of metallic materials

TR-TSE, How to Test Resilience

TS 1005-1971 PLASTICS DETERMINATION OF THE IZOD IMPACT RESISTANCE OF RIGID PLASTICS (IZOD IMPACT FLEXURAL TESTS)
TS 1004-1971 PLASTICS DETERMINATlON OF THE CHARPY IMPACT RESISTANCE OF RIGID PLASTICS (CHARPY IMPACT FLEXURAL TEST)

The American Road & Transportation Builders Association, How to Test Resilience

AASHTO T 393-2021 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT)

AENOR, How to Test Resilience

UNE-EN ISO 15653:2011 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to Test Resilience

GB/T 31967.2-2015 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness

American Society of Mechanical Engineers (ASME), How to Test Resilience

ASME SEC II A SA-350/SA-350M-2001 Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components ASTM A350/A350M-00