ZH
RU
ES

Test 1 Test 2 Test 3

Test 1 Test 2 Test 3, Total:500 items.

In the international standard classification, Test 1 Test 2 Test 3 involves: Environmental testing, Electromechanical components for electronic and telecommunications equipment, Earthworks. Excavations. Foundation construction. Underground works, Telecommunications in general, Non-destructive testing, Open systems interconnection (OSI), Telecommunication systems, Software development and system documentation, Construction materials, Protection against fire, Electronic component assemblies, Electrical engineering in general, Electronic display devices, Components and accessories for telecommunications equipment.


AENOR, Test 1 Test 2 Test 3

  • UNE-EN 60068-2-1:2007 Environmental testing -- Part 2-1: Tests - Test A: Cold (IEC 60068-2-1:2007).
  • UNE-EN ISO 22476-3:2006/A1:2014 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd 1:2011)
  • UNE-EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 3-1: Insulation tests - Test 3a: Insulation resistance.
  • UNE-EN 60068-2-2:2008 Environmental testing -- Part 2-2: Tests - Tests B: Dry heat. (IEC 60068-2-2:2007)
  • UNE-EN 60068-2-11:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST KA: SALT MIST
  • UNE-EN 60068-2-13:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST M: LOW AIR PRESSURE
  • UNE-EN 60068-2-17:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST Q: SEALING.
  • UNE-EN 60068-2-40:2000 Environmental testing -- Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
  • UNE-EN 60068-2-44:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. GUIDANCE ON TEST T: SOLDERING.
  • UNE-EN 60068-2-74:2000 Environmental testing. Part 2: Tests. Test Xc: Fluid contamination.
  • UNE-EN 60068-2-41:2000 Environmental testing -- Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
  • UNE-EN 60068-2-18:2001 Environmental testing -- Part 2-18: Tests - Tests R and guidance: Water.
  • UNE-EN 60068-2-68:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST L: DUST AND SAND.
  • UNE-EN 12350-3:2009 Testing fresh concrete - Part 3: Vebe test
  • UNE-EN 60068-2-6:2008 Environmental testing- Part 2-6: Tests- Test Fc: Vibration (sinusoidal)
  • UNE-EN ISO 22476-3:2006 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
  • UNE-EN ISO 22476-2:2008/A1:2014 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1 (ISO 22476-2:2005/Amd 1:2011)
  • UNE-EN 60068-2-61:1997 ENVIRONMENTAL TESTING. PART 2: TEST METHODS. TEST Z/ABDM: CLIMATIC SEQUENCE.
  • UNE-EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • UNE-EN 60068-3-1:2012 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
  • UNE-EN 60068-2-39:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TESTS Z/AMD: COMBINED SEQUENTIAL COLD, LOW AIR PRESSURE AND DAMP HEAT TEST
  • UNE-EN 60068-2-67:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST CY: DAMP HEAT, STEADY STATE, ACCELERATED TEST PRIMARILY INTENDED FOR COMPONENTS.
  • UNE-EN 60068-2-42:2004 Environmental testing -- Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
  • UNE-EN 60068-2-80:2006 Environmental testing -- Part 2-80: Tests - Test Fi: Vibration - Mixed mode (IEC 60068-2-80:2005)
  • UNE-EN ISO 22282-3:2014 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock (ISO 22282-3:2012)
  • UNE-EN 60068-2-82:2007 Environmental testing -- Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
  • UNE-EN 60068-2-10:2006 Environmental testing -- Part 2-10: Tests - Test J and guidance: Mould growth (IEC 60068-2-10:2005)
  • UNE-EN 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006).
  • UNE-EN 60068-2-52:1997 ENVIRONMENTAL TESTING. PART 2: TEST. TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION).
  • UNE-EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 6-3: Dynamic stress tests - Test 6c: Shock.
  • UNE-EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation.
  • UNE 7050-3:1997 TEST SIEVES. TECHNICAL REQUIREMENTS AND TESTING. PART 1. TEST SIEVES OF METAL WIRE CLOTH.
  • UNE-EN 50289-3-9:2002 Communication cables - Specifications for test methods -- Part 3-9: Mechanical test methods - Bending tests.
  • UNE-EN 60068-3-2:2000 ENVIRONMENTAL TESTING. PART 3: BACKGROUND INFORMATION. SECTION 2: COMBINED TEMPERATURE/LOW AIR PRESSURE TESTS
  • UNE-EN 50289-3-1:2002 Communication cables - Specifications for test methods -- Part 3-1: Mechanical test methods - General requirements.
  • UNE-EN 50289-1-3:2001 Communication cables - Specifications for test methods -- Part 1-3: Electrical test methods - Dielectric strength.
  • UNE-EN 60068-2-77:2000 ENVIRONMENTAL TESTING. PART 2-77: TESTS - TEST 77: BODY STRENGTH AND IMPACT SHOCK.

Lithuanian Standards Office , Test 1 Test 2 Test 3

  • LST EN 60068-2-1-2007 Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1:2007)
  • LST EN 60512-3-1-2003 Connectors for electronic equipment. Tests and measurements. Part 3-1: Insulation tests. Test 3a: Insulation resistance (IEC 60512-3-1:2002)
  • LST EN 60068-2-75-1999 Environmental testing. Part 2: Tests. Test Eh: Hammer tests (IEC 60068-2-75:1997)
  • LST EN ISO 22476-3:2005/A1:2012 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd.1:2011)
  • LST EN 60068-2-2-2008 Environmental testing - Part 2-2: Tests - Test B: Dry heat (IEC 60068-2-2:2007)
  • LST EN 60068-3-1-2012 Environmental testing -- Part 3-1: Supporting documentation and guidance - Cold and dry heat tests (IEC 60068-3-1:2011)
  • LST EN 60068-2-17-2001 Environmental testing. Part 2: Tests. Test Q: Sealing (IEC 60068-2-17:1994)
  • LST EN 60512-2-3-2003 Connectors for electronic equipment. Tests and measurements. Part 2-3: Electrical continuity and contact resistance tests. Test 2c: Contact resistance variation (IEC 60512-2-3:2002)
  • LST EN 60068-2-13-2001 Environmental testing. Part 2: Tests. Test M: Low air pressure (IEC 60068-2-13:1983)
  • LST EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist (IEC 60068-2-11:2021)
  • LST EN 60068-2-40-2001 Environmental testing. Part 2: Tests. Test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983)
  • LST EN 60068-2-11-2001 Environmental testing. Part 2: Tests. Test Ka: Salt mist (IEC 60068-2-11:1981+AC:1999)
  • LST EN 60068-2-74-2001 Environmental testing. Part 2: Tests. Test Xc: Fluid contamination (IEC 60068-2-74:1999)
  • LST EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure (IEC 60068-2-13:2021)
  • LST EN 12350-3-2009 Testing fresh concrete - Part 3: Vebe test
  • LST EN 60068-2-41-2001 Environmental testing. Part 2: Tests. Test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41:1976 + A1:1983)
  • LST EN 60068-2-38-2010 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:2009)
  • LST EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:2021)
  • LST EN 60068-2-68-2001 Environmental testing. Part 2: Tests. Test L: Dust and sand (IEC 60068-2-68:1994)
  • LST EN 60068-2-18-2002 Environmental testing. Part 2-18: Tests. Test R and guidance: Water (IEC 60068-2-18:2000)
  • LST EN 60068-2-6-2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:2007)
  • LST EN 60068-2-14-2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature (IEC 60068-2-14:2009)
  • LST EN ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
  • LST EN 60068-3-2-2001 Environmental testing. Part 3: Background information. Section 2: Combined temperature/low air pressure tests (IEC 60068-3-2:1976)
  • LST EN 60068-2-43-2004 Environmental testing. Part 2-43: Tests. Test Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-43:2003)
  • LST EN 60068-2-57-2001 Environmental testing. Part 2-57: Tests. Test Ff: Vibration. Time-history method (IEC 60068-2-57:1999)
  • LST EN 60068-2-27-2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock (IEC 60068-2-27:2008)
  • LST EN ISO 22476-2:2005/A1:2012 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1 (ISO 22476-2:2005/Amd.1:2011)
  • LST EN 60068-2-67-2001 Environmental testing. Part 2: Tests. Test Cy: Damp heat, steady state, accelerated test primarily intended for components (IEC 60068-2-67:1995)
  • LST EN 60068-2-39-2001 Environmental testing. Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39:1976)
  • LST EN 60068-2-42-2004 Environmental testing. Part 2-42: Tests. Test Kc: Sulphur dioxide test for contacts and connections (IEC 60068-2-42:2003)
  • LST EN 60068-2-82-2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components (IEC 60068-2-82:2007)
  • LST EN 60068-2-61-2001 Environmental testing. Part 2: Test methods. Test Z/ABDM: Climatic sequence (IEC 60068-2-61:1991)
  • LST EN 60068-2-80-2005 Environmental testing. Part 2-80: Tests. Test Fi: Vibration. Mixed mode (IEC 60068-2-80:2005)
  • LST EN ISO 22282-3:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock (ISO 22282-3:2012)
  • LST EN 60512-6-3-2003 Connectors for electronic equipment. Tests and measurements. Part 6-3: Dynamic stress tests. Test 6c: Shock (IEC 60512-6-3:2002)
  • LST EN 60512-2-1-2003 Connectors for electronic equipment. Tests and measurements. Part 2-1: Electrical continuity and contact resistance tests. Test 2a: Contact resistance. Millivolt level method (IEC 60512-2-1:2002)
  • LST EN 60068-2-59-2001 Environmental testing. Part 2: Tests methods. Test Fe: Vibration. Sine beat method (IEC 60068-2-59:1990)
  • LST EN 60068-2-65-2001 Environmental testing. Part 2: Methods of test. Test Fg: Vibration, acoustically induced (IEC 60068-2-65:1993)
  • LST EN 60068-2-10-2005 Environmental testing. Part 2-10: Tests. Test J and guidance: Mould growth (IEC 60068-2-10:2005)
  • LST EN 60512-12-3-2006 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006)
  • LST EN 60512-12-3-2006/AC-2007 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006)
  • LST EN 60512-11-3-2003 Connectors for electronic equipment. Tests and measurements. Part 11-3: Climatic tests. Test 11c: Damp heat, steady state (IEC 60512-11-3:2002)
  • LST EN 60068-2-55-2001 Basic environmental testing procedures. Part 2: Tests. Test Ee and guidance. Bounce (IEC 60068-2-55:1987)
  • LST EN 50289-1-3-2002 Communication cables. Specifications for test methods. Part 1-3: Electrical test methods. Dielectric strength

Danish Standards Foundation, Test 1 Test 2 Test 3

  • DS/EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
  • DS/EN 60068-2-75:1998 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
  • DS/EN 60068-2-2:2008 Environmental testing - Part 2-2: Tests - Test B: Dry heat
  • DS/EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
  • DS/EN 60068-2-11:2001 Environmental testing - Part 2: Tests - Test Ka: Salt mist
  • DS/EN ISO 22476-3/A1:2012 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1
  • DS/EN 60068-2-13:2001 Environmental testing - Part 2: Tests - Test M: Low air pressure
  • DS/EN IEC 60068-2-11:2021 Environmental testing – Part 2-11: Tests – Test Ka: Salt mist
  • DS/EN 60068-2-40:2001 Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
  • DS/EN 60068-2-44:1996 Environmental testing - Part 2: Tests - Guidance on Test T: Soldering
  • DS/EN 60068-2-74:2001 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
  • DS/EN IEC 60068-2-13:2021 Environmental testing – Part 2-13: Tests – Test M: Low air pressure
  • DS/EN 60068-2-41:2001 Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
  • DS/EN 60068-2-68:1998 Environmental testing - Part 2: Tests - Test L: Dust and sand
  • DS/EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
  • DS/EN 60068-2-18:2001 Environmental testing - Part 2-18: Tests - Tests R and guidance: Water
  • DS/EN 12350-3:2010 Testing fresh concrete - Part 3: Vebe test
  • DS/EN 60068-2-38:2010 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
  • DS/EN 60068-2-17:1998 Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing
  • DS/EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
  • DS/EN 60068-2-43:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
  • DS/CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007
  • DS/EN 60068-2-78:2002 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • DS/EN 60068-2-80:2006 Environmental testing – Part 2-80: Tests – Test Fi: Vibration - Mixed mode
  • DS/EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
  • DS/EN 60068-2-61:1998 Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence
  • DS/EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
  • DS/EN 60068-3-1:2012 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
  • DS/EN 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
  • DS/EN 60068-2-39:2001 Environmental testing - Part 2: Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
  • DS/EN 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
  • DS/EN 60068-2-67:1998 Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
  • DS/EN 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
  • DS/EN 60068-2-65:1996 Environmental testing - Part 2: Methods of test - Test Fg: Vibration, acoustically induced
  • DS/EN 60068-2-10:2006 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
  • DS/EN 60068-2-65:2013 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
  • DS/EN 60068-3-2:2001 Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure tests
  • DS/EN 60068-2-52:1998 Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
  • DS/EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
  • DS/EN 50289-1-3:2002 Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength
  • DS/EN 60512-12-3/Corr. 1:2007 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
  • DS/EN 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
  • DS/EN 60068-2-77:2000 Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock
  • DS/EN 60068-2-81:2004 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
  • DS/EN 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

Association Francaise de Normalisation, Test 1 Test 2 Test 3

  • NF EN 60068-2-1:2007 Essais d'environnement - Partie 2-1 : essais - Essais A : froid
  • NF EN 60068-2-2:2007 Essais d'environnement - Partie 2-2 : essais - Essais B : chaleur sèche
  • NF EN 60068-2-75:2015 Essais d'environnement - Partie 2-75 : essais - Essai Eh : essais au marteau
  • NF EN 60512-3-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 3-1 : essais d'isolement - Essai 3a : résistance d'isolement
  • NF EN ISO 22476-3/A1:2012 Reconnaissance et essais géotechniques - Essais en place - Partie 3 : essai de pénétration au carottier - Amendement 1
  • NF EN ISO 22476-2/A1:2012 Reconnaissance et essais géotechniques - Essais en place - Partie 2 : essai de pénétration dynamique - Amendement 1
  • NF EN 60068-2-17:1995 Essais d'environnement - Partie 2 : essais - Essai Q : étanchéité.
  • NF S57-046-4*NF ISO 25947-4:2017 Fireworks - Categories 1, 2 and 3 - Part 4 : test methods
  • NF ISO 25947-4:2017 Artifices de divertissement - Catégories 1, 2 et 3 - Partie 4 : méthodes d'essai
  • NF EN 60068-2-78:2013 Essais d'environnement - Partie 2-78 : essais - Essai Cab : chaleur humide, essai continu
  • NF EN 60068-2-40:2000 Essais d'environnement - Partie 2 : essais - Essai Z/AM : essais combinés froid/basse pression atmosphérique
  • NF C20-701*NF EN 60068-2-1:2007 Environmental testing - Part 2-1 : tests - Tests A : cold.
  • NF EN IEC 60068-2-13:2021 Essais d'environnement - Partie 2-13 : essais - Essai M : basse pression atmosphérique
  • NF EN 60068-2-74:2000 Essais d'environnement - Partie 2 : essais - Essai Xc : contamination par des fluides
  • NF EN 60068-2-41:2000 Essais d'environnement - Partie 2 : essais - Essai Z/BM : essais combinés chaleur sèche/basse pression atmosphérique
  • NF C20-700-2-18*NF EN 60068-2-18:2017 Environmental testing - Part 2-18 : tests - Test R and guidance : Water
  • NF EN 60068-2-18:2017 Essais d'environnement - Partie 2-18 : essais - Essai R et guide : eau
  • NF EN 60068-2-14:2009 Essais d'environnement - Partie 2-14 : essais - Essai N : variation de température
  • NF EN 60068-2-74/A1:2018 Essais d'environnement - Partie 2-74 : essais - Essai Xc : Contamination par des fluides
  • NF EN 60068-2-6:2008 Essais d'environnement - Partie 2-6 : essais - Essai Fc : vibrations (sinusoïdales)
  • NF EN 60068-2-68:1998 Essais d'environnement - Partie 2 : essais - Essai L : poussière et sable.
  • NF EN 60068-2-55:2013 Essais d'environnement - Partie 2- 55 : essais - Essai Ee et guide - Essais de chargement sans arrimage y compris l'essai de rebondissement
  • NF EN 60512-11-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-3 : essais climatiques - Essais 11c : essai continu de chaleur humide
  • NF P18-431-3*NF EN 12350-3:2019 Testing fresh concrete - Part 3 : Vebe test
  • NF EN 12350-3:2019 Essais pour béton frais - Partie 3 : essai Vébé
  • NF EN IEC 60068-2-52:2018 Essais d'environnement - Partie 2-52 : essais - Essai Kb : Brouillard salin, essai cyclique (solution de chlorure de sodium)
  • NF EN 60068-2-43:2003 Essais d'environnement - Partie 2-43 : essais - Essai Kd : essai à l'hydrogène sulfuré pour contacts et connexions
  • NF C20-727*NF EN 60068-2-27:2009 Environmental testing - Part 2-27 : tests - Test Ea and guidance : shock.
  • NF C20-714*NF EN 60068-2-14:2009 Environmental testing - Part 2-14 : tests - Test N : change of temperature.
  • NF EN 60068-2-10:2005 Essais d'environnement - Partie 2-10 : essais - Essai J et Guide : moisissures
  • NF EN 60068-2-27:2009 Essais d'environnement - Partie 2-27 : essais - Essai Ea et guide : chocs
  • NF EN 60068-2-10/A1:2018 Essais d'environnement - Partie 2-10 : essais - Essai J et guide : Moisissures
  • NF EN 60068-2-42:2003 Essais d'environnement - Partie 2-42 : essais - Essai Kc : essai à l'anhydride sulfureux pour contacts et connexions
  • NF EN 60068-2-60:2016 Essais d'environnement - Partie 2-60 : essais - Essai Ke : essai de corrosion dans un flux de mélange de gaz
  • NF EN IEC 60068-2-38:2021 Essais d'environnement - Partie 2-38 : essais - essai Z/AD : essai cyclique composite de température et d'humidité
  • FD S61-925*FD CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007
  • NF EN 60068-2-80:2005 Essais d'environnement - Partie 2-80 : essais - Essai Fi : vibrations - Mode mixte
  • NF EN 60068-2-61:1994 Essais d'environnement - Partie 2 : méthode d'essai - Essai Z/ABDM : séquence climatique.
  • NF EN 60068-2-65:2013 Essais d'environnement - Partie 2-65 : essais - Essai Fg : vibrations - Méthode induite acoustiquement
  • NF EN 60068-3-1:2012 Essais d'environnement - Partie 3-1 : documentation d'accompagnement et guide - Essais de froid et de chaleur sèche
  • NF EN 60068-2-30:2006 Essais d'environnement - Partie 2-30 : essais - Essai Db : essai cyclique de chaleur humide (cycle de 12 h + 12 h)
  • NF EN ISO 22477-2:2023 Reconnaissance et essais géotechniques - Essais des structures géotechniques - Partie 2 : essai de pieux : essais de chargement statique en traction
  • NF C20-710/A1*NF EN 60068-2-10/A1:2018 Environmental testing - Part 2-10 : tests - Test J and guidance : Mould growth
  • NF EN ISO 22477-1:2018 Reconnaissance et essais géotechniques - Essais des structures géotechniques - Partie 1 : essai de pieux : essai de chargement statique en compression
  • NF C20-700-2-85*NF EN IEC 60068-2-85:2019 Environmental testing - Part 2-85 : tests - Test Fj : vibration - Long time history replication
  • NF EN 60512-6-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 6-3 : essais de contraintes dynamiques - Essai 6c : chocs
  • NF EN 50289-3-9:2001 Câbles de communication - Spécifications des méthodes d'essai - Partie 3-9 : méthodes d'essais mécaniques - Essais de pliage
  • NF EN 60068-2-67/A1:2019 Essais d'environnement Partie 2-67 : essais - Essai Cy : essai continu de chaleur humide, essai accéléré applicable en premier lieu aux composants
  • NF EN 50289-3-1:2001 Câbles de communication - Spécifications des méthodes d'essai - Partie 3-1 : méthodes d'essais mécaniques - Prescriptions générales
  • NF EN 50289-1-3:2001 Câbles de communication - Spécifications des méthodes d'essais - Partie 1-3 : méthodes d'essais électriques - Rigidité diélectrique
  • NF EN 60512-2-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-3 : essais de continuité électrique et de résistance de contact - Essai 2c : variation de la résistance de contact
  • NF C20-700-2-52*NF EN IEC 60068-2-52:2018 Environmental testing - Part 2-52 : tests - Test Kb : salt mist, cyclic (sodium chloride solution)
  • NF C20-764/A1*NF EN 60068-2-64/A1:2019 Environmental testing - Part 2-64 : Tests - Test Fh : vibration, broadband random and guidance

RU-GOST R, Test 1 Test 2 Test 3

German Institute for Standardization, Test 1 Test 2 Test 3

  • DIN EN 60512-3-1:2003-01 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests; Test 3a: Insulation resistance (IEC 60512-3-1:2002); German version EN 60512-3-1:2002 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside this standard unt...
  • DIN EN 60068-2-40:2000-08 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999 / Note: To be replaced by DIN EN 60068-2-39 (2013-08).
  • DIN EN 60068-2-41:2000-08 Environmental testing - Part 2: Tests; test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41:1976 + A1:1983); German version EN 60068-2-41:1999 / Note: To be replaced by DIN EN 60068-2-39 (2013-08).
  • DIN EN 60068-2-17:1995-05 Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994
  • DIN EN 60512-2-3:2003-01 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation (IEC 60512-2-3:2002); German version EN 60512-2-3:2002 / Note: DIN IEC 60512-2 (1994-05) ...
  • DIN EN 60068-2-1:2008 Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1:2007); German version EN 60068-2-1:2007
  • DIN EN 50289-3-2:2002-05 Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor; German version EN 50289-3-2:2001 / Note: Applies in conjunction with DIN EN 50289-3-1 (2002-05).
  • DIN EN 60068-2-77:1999-10 Environmental testing - Part 2-77: Tests; test 77: Body strength and impact shock (IEC 60068-2-77:1999); German version EN 60068-2-77:1999
  • DIN EN 50289-3-1:2002-05 Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements; German version EN 50289-3-1:2001
  • DIN EN 50289-1-3:2002-02 Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength; German version EN 50289-1-3:2001
  • DIN 1045-4:2012-02 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing (ISO 22476-2:2005 + Amd 1:2011); German version EN ISO 22476-2:2005 + A1:2011
  • DIN EN ISO 22476-2:2012-03 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing (ISO 22476-2:2005 + Amd 1:2011); German version EN ISO 22476-2:2005 + A1:2011
  • DIN EN ISO 22476-3:2012-03 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005 + Amd 1:2011); German version EN ISO 22476-3:2005 + A1:2011
  • DIN EN 12350-3:2019 Testing fresh concrete - Part 3: Vebe test
  • DIN EN 12350-3:2019-09 Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:2019
  • DIN 685-3:2001-02 Round steel link chains, tested - Part 3: Test
  • DIN EN 60068-2-43:2004-04 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-43:2003); German version EN 60068-2-43:2003 / Note: DIN IEC 60068-2-43 (1985-08) remains valid alongside this standard until 2006-09-01.
  • DIN EN 60068-2-68:1997-02 Environmental testing - Part 2: Tests; test L: Dust and sand (IEC 60068-2-68:1994); German version EN 60068-2-68:1996
  • DIN EN 60068-2-42:2004-04 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections (IEC 60068-2-42:2003); German version EN 60068-2-42:2003 / Note: DIN IEC 60068-2-42 (1985-08) remains valid alongside this standard until 2006-09-01.
  • DIN EN ISO 22477-1:2019-12 Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018, Corrected version 2019-03); German version EN ISO 22477-1:2018
  • DIN EN ISO 9906:2013-03 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012); German version EN ISO 9906:2012
  • DIN CEN/TR 15642:2011-06*DIN SPEC 91247:2011-06 Unified tests procedures for the tests of EN 3-7:2004+A1:2007; German version CEN/TR 15642:2011
  • DIN EN 50289-1-2:2002-02 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance; German version EN 50289-1-2:2001
  • DIN 96298-3:2017-10 Medical instruments - Terms, measuring methods and tests - Part 3: Tests
  • DIN EN 60512-6-3:2003-01 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests; Test 6c: Shock (IEC 60512-6-3:2002); German version EN 60512-6-3:2002 / Note: DIN IEC 60512-4 (1994-05) remains valid alongside this standard until 2005-04-01.
  • DIN EN ISO 22477-2:2022-05 Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: Static tension load testing (ISO/DIS 22477-2:2022); German and English version prEN ISO 22477-2:2022 / Note: Date of issue 2022-04-08
  • DIN 53142-2:2014-12 Testing of board - Puncture test - Part 2: Puncture test with linear move
  • DIN 58220-3:2021-04 Visual acuity testing - Part 3: Test for use in expertise; Text in German and English
  • DIN EN 60068-2-10:2006-03 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth (IEC 60068-2-10:2005); German version EN 60068-2-10:2005 / Note: DIN IEC 60068-2-10 (1991-04) remains valid alongside this standard until 2008-06-01.*A transition period, as s...
  • DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN EN ISO 22282-3:2012-09 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock (ISO 22282-3:2012); German version EN ISO 22282-3:2012
  • DIN EN 60512-2-1:2003-01 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance; Millivolt level method (IEC 60512-2-1:2002); German version EN 60512-2-1:2002 / Note: DIN IEC 6051...
  • DIN EN 60068-2-81:2004-07 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis (IEC 60068-2-81:2003); German version EN 60068-2-81:2003

CENELEC - European Committee for Electrotechnical Standardization, Test 1 Test 2 Test 3

  • EN 60695-2-1/3:1996 Fire Hazard Testing Part 2: Test Methods Section 1/Sheet 3: Glow-Wire Ignitability Test on Materials
  • EN 60695-2-1/2:1996 Fire Hazard Testing Part 2: Test Methods Section 1/Sheet 2: Glow- Wire Flammability Test on Materials
  • EN 60068-2-62:1995 Environmental Testing Part 2: Test Methods Test Ef: Impact@ Pendulum Hammer
  • EN 60695-2-2:1994 Fire Hazard Testing Part 2: Test Methods Section 2 - Needle-Flame Test
  • EN 60068-2-33:1999 Environmental Testing - Part 2: Tests - Guidance on Change of Temperature Tests
  • EN 60068-2-9:1999 Environmental Testing Part 2: Tests - Guidance for Solar Radiation Testing
  • EN 60695-2-1/0:1996 Fire Hazard Testing; Part 2: Test Methods Section 1/Sheet 0: Glow-Wire Test Methods - General
  • HD 323.2.20 S3-1988 Basic Environmental Testing Procedures-Part 2: Tests Test T: Soldering
  • EN 60068-2-63:1994 Environmental Testing Part 2: Test Methods Test Eg: Impact@ Spring Hammer
  • EN 60695-2-4/1:1993 Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 1: 1 kW Nominal Pre-Mixed Test Flame and Guidance
  • EN 60243-3:2001 Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 1@2/50 US Impulse Tests
  • EN 60068-3-1:1999 Environmental Testing Part 3: Background Information Section 1: Cold and Dry Heat Tests
  • HD 323.2.38 S1-1976 Basic Environmental Testing Procedures - Part 2: Tests. Test Z/ AD: Composite Temperature/Humidity Cyclic Test
  • EN 60068-2-32:1993 Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free Fall
  • EN 60068-2-65:1994 Environmental Testing Part 2: Methods of Test Test Fg: Vibration@ Acoustically Induced

Korean Agency for Technology and Standards (KATS), Test 1 Test 2 Test 3

  • KS C IEC 60068-2-2-2014(2019) Environmental testing — Part 2-2: Tests — Test B: Dry heat
  • KS C IEC 60068-2-11-2014(2019) Environmental testing — Part 2: Tests — Test Ka: Salt mist
  • KS C 0260-1995 Fire hazard testing Part 2:Test methods Section 1:Glow-wire test and guidance
  • KS C 0284-2013 ENVIRONMENTAL TESTING PART 2 : TESTs - TEST RAND GUIDANCE : WATER
  • KS C IEC 60068-2-13-2014(2019) Environmental testing — Part 2-13: Tests — Test M: Low air pressure
  • KS C IEC 60068-2-60:2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test
  • KS C IEC 60068-2-14-2014(2019) Environmental testing — Part 2-14: Tests — Test N: Change of temperature
  • KS C IEC 60068-2-6-2015(2020) Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
  • KS C IEC 60068-3-1:2010 Basic environmental testing procedures-Part 3:Background information-Section one:Cold and dry heat tests
  • KS C IEC 60068-3-1:2017 Basic environmental testing procedures－Part 3：Background information－Section one：Cold and dry heat tests
  • KS C IEC 60068-2-38-2014(2019) Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
  • KS C IEC 60068-2-68:2020 Environmental testing — Part 2-68: Tests —Test L: Dust and sand
  • KS C IEC 60068-2-43:2020 Environmental testing — Part 2-43: Tests — Test Kd: Hydrogen sulphide test for contacts and connections
  • KS C IEC 60068-2-42:2020 Environmental testing — Part 2-42: Tests — Test Kc: Sulphur dioxide test for contacts and connections
  • KS C IEC 60068-2-7:2020 Basic environmental testing procedures — Part 2-7: Tests — Test Ga and guidance: Acceleration, steady state
  • KS C 0260-2001(2011) Fire hazard testing-Part 2 : Test methods- Section 1/sheet 0 : Glow-wire test methods-General
  • KS C 0229-2016 Basic environmental testing procedures Part 2 : Tests, Test M : Low air pressure
  • KS C 0285-2013 Environmental testing Part 2 test methods Test Z/ABDM : Climatic sequence
  • KS C 0285-1997(2012) Environmental testing Part 2 test methods Test Z/ABDM : Climatic sequence
  • KS C IEC 60068-2-55:2018 Environmental testing — Part 2-55: Tests — Test Ee and guidance — Loose cargo testing including bounce
  • KS C 0228-2016 Basic environmental testing procedures - Part 2 : Tests, Test Z/AD : Composite temperature/humidity cyclic test
  • KS C 0228-2001(2011) Basic environmental testing procedures - Part 2 : Tests, Test Z/AD : Composite temperature/humidity cyclic test
  • KS C 0222-2013 Basic environmental testing procedures part 2:tests, test ca:damp heat, steady state
  • KS C IEC 60068-2-10:2019 Environmental testing — Part 2-10: Tests —Test J and guidance: Mould growth
  • KS C IEC 60068-2-61:2020 Environmental testing — Part 2-61: Test methods — Test Z/ABDM: Climatic sequence
  • KS C 0246-1995 Basic environmental testing procedures part 2:Tests-Test Kd:Hydrogen sulphide test for contacts and connections
  • KS C 0245-2001(2016) Basic environmental testing procedures Part 2 : Tests-Test Kc : Sulphur dioxide test for contacts and connections
  • KS C 0212-1995(2015) Basic environmental testing procedures Part 2 : Tests Guidance to Test Kd : Hydrogen sulphide test for contacts and connections
  • KS C 0252-2016 Environmental testing－Part 2：Tests. Test XA and guidance：Immersion in cleaning solvents
  • KS C IEC 60068-2-64-2014(2019) Environmental testing — Part 2-64: Tests — Test Fh: Vibration, broadband random and guidance
  • KS C IEC 60068-2-78:2018 Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state

ES-UNE, Test 1 Test 2 Test 3

  • UNE-EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests (Endorsed by AENOR in January of 2015.)
  • UNE-EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist (Endorsed by Asociación Española de Normalización in May of 2021.)
  • UNE-EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure (Endorsed by Asociación Española de Normalización in May of 2021.)
  • UNE-EN 60068-2-60:2016 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
  • UNE-EN 60068-2-74:1999/A1:2018 Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination (Endorsed by Asociación Española de Normalización in August of 2018.)
  • EN IEC 60068-2-14:2023 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
  • UNE-EN 12350-3:2020 Testing fresh concrete - Part 3: Vebe test
  • UNE-EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (Endorsed by Asociación Española de Normalización in June of 2021.)
  • UNE-CEN/TR 15642:2015 IN Unified tests procedures for the tests of EN 3-7:2004+A1:2007
  • UNE-EN 60068-2-65:2013 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method (Endorsed by AENOR in August of 2013.)
  • UNE-EN 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce (Endorsed by AENOR in August of 2013.)
  • UNE-EN 60068-2-10:2005/A1:2018 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth (Endorsed by Asociación Española de Normalización in August of 2018.)
  • UNE-EN ISO 22477-1:2019 Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018, Corrected version 2019-03)
  • IEC 60068-2:2023 SER Environmental testing - Part 2: Tests - ALL PARTS
  • UNE-EN 60068-2-57:2013 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method (Endorsed by AENOR in January of 2014.)
  • UNE-EN 60068-2-64:2009/A1:2020 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

European Telecommunications Standards Institute (ETSI), Test 1 Test 2 Test 3

  • ETSI ES 201873-1 V 4.13.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - Part 1: TTCN-3 Core Language
  • ETSI ES 201 873-1-2021 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.13.1)
  • ETSI TS 102950-2 V 1.9.1-2021 Methods for Testing and Specification (MTS) - TTCN-3 Conformance Test Suite - Part 2: Test Suite Structure and Test Purposes (TSS&TP)
  • ETSI ES 201 873-1-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language V3.2.1
  • ETSI TS 102 950-2-2012 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) V1.2.1
  • ETSI TS 102 950-2-2016 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.5.1)
  • ETSI TS 102 950-2-2021 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.9.1)
  • ETSI ES 201 873-1-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language V3.1.1
  • ETSI ES 201 873-1-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language V2.2.1
  • ETSI ES 201 873-1-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 1: TTCN-3 Core Language V2.2.0
  • ETSI ES 201 873-1-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language V3.4.1
  • ETSI ES 201 873-1-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language V4.1.1
  • ETSI ES 201 873-1-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language V4.4.1
  • ETSI ES 201 873-7-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.5.1)
  • ETSI ES 201873-7 V 4.9.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - Part 7: Using ASN.1 with TTCN-3
  • ETSI ES 202 782-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing V1.1.1
  • ETSI TS 103596-3 V 1.1.1-2021 Methods for Testing and Specification (MTS) - Test Specification for CoAP - Part 3: Performance Tests
  • ETSI TS 103597-3 V 1.1.1-2021 Methods for Testing and Specification (MTS) - Test Specification for MQTT - Part 3: Performance Tests
  • ETSI ES 201 873-2-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 2: TTCN-3 Tabular Presentation Format (TFT) V2.2.0
  • ETSI ES 201 873-2-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 2: TTCN-3 Tabular presentation Format (TFT) V3.1.1
  • ETSI ES 201 873-2-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 2: TTCN-3 Tabular presentation Format (TFT) (V3.2.1)
  • ETSI ES 201 873-2-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 2: TTCN-3 Tabular Presentation Format (TFT) V2.2.1
  • ETSI ES 201 873-7-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 V3.1.1
  • ETSI ES 201 873-7-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 V3.3.2
  • ETSI ES 201 873-7-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 V4.1.1
  • ETSI ES 201 873-7-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 V4.4.1
  • ETSI TS 103663-2 V 1.2.1-2021 Methods for Testing and Specification (MTS) - Conformance Test Suite for TTCN-3 Object Oriented Features - Part 2: Test Suite Structure and Test Purposes (TSS&TP)
  • ETSI TS 102 995-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Proforma for TTCN-3 reference test suite (V1.1.1; Includes Diskette)
  • ETSI TS 103597-2 V 1.1.1-2021 Methods for Testing and Specification (MTS) - Test Specification for MQTT - Part 2: Security Tests
  • ETSI TS 103596-2 V 1.1.1-2021 Methods for Testing and Specification (MTS) - Test Specification for CoAP - Part 2: Security Tests
  • ETSI TS 102 351-2004 Methods for Testing and Specification (MTS); IP Testing; TTCN-3 IPv6 Test Specification Toolkit v1.1.1
  • ETSI TS 103 663-2-2021 Methods for Testing and Specification (MTS); Conformance Test Suite for TTCN-3 Object Oriented Features; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.2.1)
  • ETSI ES 202785 V 1.8.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - TTCN-3 Language Extensions: Behaviour Types
  • ETSI TS 103597-1 V 1.1.2-2021 Methods for Testing and Specification (MTS) - Test Specification for MQTT - Part 1: Conformance Tests
  • ETSI TS 103596-1 V 1.1.1-2021 Methods for Testing and Specification (MTS) - Test Specification for CoAP - Part 1: Conformance Tests
  • ETSI TS 102950-3 V 1.9.1-2021 Methods for Testing and Specification (MTS) - TTCN-3 Conformance Test Suite - Part 3: Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT)
  • ETSI ES 202 785-2021 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.8.1)
  • ETSI ES 202784 V 1.8.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - TTCN-3 Language Extensions: Advanced Parameterization
  • ETSI ES 201873-8 V 4.8.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - Part 8: The IDL to TTCN-3 Mapping

Standard Association of Australia （SAA）, Test 1 Test 2 Test 3

  • AS 60068.2.1:2023 Environmental testing, Part 2.1: Tests — Test A: Cold (IEC 60068-2-1:2007 (ED. 6.0) MOD)
  • IEC 60068-2-17:2023 Environmental testing — Part 2-17: Tests — Test Q: Sealing
  • IEC 60068-2-67:1995/AMD1:2019 Amendment 1 — Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components
  • IEC 60068-2-60:2015 RLV Environmental testing — Part 2-60: Tests — Test Ke: Flowing mixed gas corrosion test
  • IEC 60068-2-14:2023 RLV Environmental testing — Part 2-14: Tests — Test N: Change of temperature
  • IEC 60068-2-14:2023 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
  • AS 60068.2.75:2023 Environmental testing, Part 2.75: Tests — Test Eh: Hammer tests (IEC 60068-2-75:2014 (ED. 2.0) MOD)
  • AS 60068.2.2:2023 Environmental testing, Part 2.2: Tests — Test B: Dry heat (IEC 60068-2-2:2007 (ED. 5.0) MOD)
  • IEC 60068-2-78:2012 RLV Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
  • IEC 60068-3-1:2023 Environmental testing — Part 3-1: Supporting documentation and guidance — Cold and dry heat tests
  • IEC 60068-3-1:2023 RLV Environmental testing — Part 3-1: Supporting documentation and guidance — Cold and dry heat tests
  • IEC 60068-2-67:1995+AMD1:2019 CSV Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components

International Telecommunication Union (ITU), Test 1 Test 2 Test 3

  • ITU-T Z.146 CHINESE-2006 Testing and Test Control Notation version 3 (TTCN-3): Using ASN.1 with TTCN-3
  • ITU-T Z.167-2011 (Pre-Published) Testing and Test Control Notation version 3: (TTCN-3) mapping from ASN.1
  • ITU-T Z.161.5-2014 Testing and Test Control Notation version 3: TTCN-3 Language extensions: Performance and real time testing
  • ITU-T Z.146 FRENCH-2006 Testing and Test Control Notation version 3 (TTCN-3): Using ASN.1 with TTCN-3 Study Group 17
  • ITU-T Z.146 SPANISH-2006 Testing and Test Control Notation version 3 (TTCN-3): Using ASN.1 with TTCN-3 Study Group 17
  • ITU-T Z.167-2012 (Pre-Published) Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3
  • ITU-T Z.167-2008 Testing and Test Control Notation version 3: TTCN-3 mapping from ASN.1 Study Group 17
  • ITU-T Z.161-2014 Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.161-2021 Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.171-2021 Testing and Test Control Notation version 3: Using JSON with TTCN-3
  • ITU-T Z.161.5-2015 Testing and Test Control Notation version 3: TTCN-3 language extensions: Performance and real time testing (Study Group 17)
  • ITU-T Z.161-2011 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.164-2011 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 operational semantics
  • ITU-T Z.161-2012 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 core language

IN-BIS, Test 1 Test 2 Test 3

ETSI - European Telecommunications Standards Institute, Test 1 Test 2 Test 3

  • ES 201 873-1-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V3.2.1)
  • ES 201 873-1-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.7.1)
  • ES 201 873-1-2018 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.10.1)
  • ES 201 873-1-2019 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.11.1)
  • ES 201 873-1-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.5.1)
  • ES 201 873-1-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.2.1)
  • ES 201 873-1-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.4.1)
  • ES 201 873-1-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 1: TTCN-3 Core Language (V2.2.0)
  • ES 201 873-1-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V2.2.1)
  • ES 201 873-1-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.9.1)
  • ES 201 873-1-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V3.3.2)
  • ES 201 873-1-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.6.1)
  • ES 201 873-1-2016 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.8.1)
  • ES 201 873-1-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.3.1)
  • ES 201 873-1-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V4.1.1)
  • ES 201 873-1-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V3.0.0)
  • ES 201 873-1-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language (V3.2.1)
  • TS 102 950-2-2013 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.3.1)
  • TS 102 950-2-2014 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.4.1)
  • TS 102 950-2-2016 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.5.1)
  • TS 102 950-2-2011 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 102 950-2-2012 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.2.1)
  • ES 202 782-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing (V1.3.1)
  • ES 202 782-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing (V1.2.1)
  • ES 202 782-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing (V1.1.1)
  • ES 201 873-2-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 2: TTCN-3 Tabular presentation Format (TFT) (V3.1.1)
  • ES 201 873-2-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 2: TTCN-3 Tabular Presentation Format (TFT) (V2.2.1)
  • ES 201 873-2-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 2: TTCN-3 Tabular presentation Format (TFT) (V3.2.1)
  • ES 201 873-2-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 2: TTCN-3 Tabular presentation Format (TFT) (V3.2.1)
  • ES 201 873-2-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 2: TTCN-3 Tabular Presentation Format (TFT) (V2.2.0)
  • ES 201 873-7-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V3.3.2)
  • ES 201 873-7-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V3.1.1)
  • ES 201 873-7-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.1.1)
  • ES 201 873-7-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.5.1)
  • ES 201 873-7-2018 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.7.1)
  • ES 201 873-7-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.2.1)
  • ES 201 873-7-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.6.1)
  • ES 201 873-7-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.3.1)
  • ES 201 873-7-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3 (V4.4.1)
  • TS 102 950-2-2018 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS & TP) (V1.7.1; Includes Diskette)
  • TS 102 950-2-2017 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS & TP) (V1.6.1; Includes Diskette)
  • TS 102 995-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Proforma for TTCN-3 reference test suite (V1.1.1; Includes Diskette)
  • ES 203 022-2018 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 extension: Advanced Matching (V1.2.1)
  • ES 202 789-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Extended TRI (V1.1.1)
  • ES 202 789-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Extended TRI (V1.2.1)
  • ES 202 789-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Extended TRI (V1.3.1)
  • ES 202 789-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Extended TRI (V1.4.1)
  • ES 201 873-3-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 3: TTCN-3 Graphical presentation Format (GFT) (V3.0.0)
  • TR 101 873-3-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 3: TTCN-3 Graphical Presentation Format (GFT) (V1.2.1)
  • ES 201 873-3-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 3: TTCN-3 Graphical Presentation Format (GFT) (V2.2.1)
  • ES 201 873-3-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 3: TTCN-3 Graphical presentation Format (GFT) (V3.2.1)
  • ES 201 873-3-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 3: TTCN-3 Graphical presentation Format (GFT) (V3.2.1)
  • ES 201 873-3-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 3: TTCN-3 Graphical Presentation Format (GFT) (V2.2.1)
  • TS 102 351-2004 Methods for Testing and Specification (MTS); IP Testing; TTCN-3 IPv6 Test Specification Toolkit (v1.1.1)
  • TS 186 001-3-2010 IMS Network Testing (INT); Network Integration Testing; Part 3: Test Suite Structure and Test Purposes (TSS&TP) for SIP-SIP (V2.2.1)
  • ES 201 873-4-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V4.1.1)
  • ES 201 873-4-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V4.4.0)
  • ES 201 873-4-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V3.3.1)
  • ES 201 873-4-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V2.2.1)
  • ES 203 022-2019 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Advanced Matching (V1.3.1)
  • ES 201 873-4-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V4.2.1)
  • ES 201 873-4-2002 Methods for Testing and Specification (MTS); Testing and Test Control Notation Version 3; Part 4: TTCN-3 Operational Semantics (V2.2.1)
  • ES 202 785-2018 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.6.1)
  • ES 202 785-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.1.1)
  • ES 202 785-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.4.1)
  • ES 202 785-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.2.1)
  • ES 201 873-4-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V3.1.1)
  • ES 201 873-4-2016 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V4.5.1)
  • ES 202 785-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.5.1)
  • ES 201 873-4-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V4.6.1)
  • ES 201 873-8-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping
  • ES 201 873-4-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 4: TTCN-3 Operational Semantics (V3.2.1)
  • ES 202 785-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.3.1)
  • ES 203 022-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Advanced Matching (V1.1.1)
  • ES 202 785-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types (V1.1.1)
  • TS 101 203-2-1997 Identification Card Systems; Telecommunications IC Cards and Terminals; Test Methods and Conformance Testing for EN 726-3; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)

CEN - European Committee for Standardization, Test 1 Test 2 Test 3

European Committee for Electrotechnical Standardization（CENELEC）, Test 1 Test 2 Test 3

  • EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
  • EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure
  • EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
  • EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
  • EN 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
  • EN 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
  • EN 60068-2-65:2013 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
  • EN IEC 60068-2-52:2018 Environmental testing - Part 2: Tests - Test Kb: Salt mist@ cyclic (sodium chloride solution)
  • EN IEC 60068-2-85:2019 Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication

International Organization for Standardization (ISO), Test 1 Test 2 Test 3

  • ISO 3452-3:1998/Cor 1:2001 Non-destructive testing - Penetrant testing Part 3: Reference test blocks; Technical Corrigendum 1
  • ISO 22477-2:2022 Geotechnical investigation and testing — Testing of geotechnical structures — Part 2: Testing of piles: Static tension load testing
  • ISO 22477-2:2023 Geotechnical investigation and testing — Testing of geotechnical structures — Part 2: Testing of piles: Static tension load testing
  • ISO 3452-2:2013 Non-destructive testing.Penetrant testing.Part 2: Testing of penetrant materials
  • ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Test 1 Test 2 Test 3

  • ITU-T Z.167-2017 Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3 (Study Group 17)
  • ITU-T Z.167-2018 Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3 (Study Group 17)

IX-ECMA, Test 1 Test 2 Test 3

ECMA - European Association for Standardizing Information and Communication Systems, Test 1 Test 2 Test 3

  • 403-2013 NFCIP-2 Test Methods (1st Edition)

未注明发布机构, Test 1 Test 2 Test 3

British Standards Institution (BSI), Test 1 Test 2 Test 3

  • 21/30442506 DC BS IEC 60068-3-1. Environmental testing - Part 3-1. Supporting documentation and guidance. Cold and dry heat tests
  • 19/30390374 DC BS EN 60068-2-13. Environmental testing. Part 2-13. Tests. Test M. Low air pressure
  • 19/30393413 DC BS EN IEC 60068-2-38. Environmental testing. Part 2-38. Tests. Test Z/AD: Composite temperature/humidity cyclic test
  • 22/30445528 DC BS EN IEC 60068-2-14. Environmental testing - Part 2-14. Tests. Test N; Change of temperature
  • 23/30452479 DC BS EN IEC 63211-3-2. Durability test methods for electronic displays - Part 3-2. Mechanical tests. Static stress
  • BS EN 60068-2-11:1999 Environmental testing. Test methods. Tests. Test KA. Salt mist
  • 21/30442502 DC BS IEC 60068-2-17. Basic environmental testing procedures - Part 2-17. Tests. Test Q: Sealing
  • 20/30415103 DC BS EN IEC 60068-2-11. Basic environmental testing procedures. Part 2-11. Tests. Test Ka. Salt mist
  • 19/30389871 DC BS EN IEC 60068-2-11. Basic environmental testing procedures. Part 2-11. Tests. Test Ka. Salt mist
  • BS EN 60068-2-13:1999 Environmental testing. Test methods. Tests. Test M. Low air pressure
  • BS EN 60068-2-41:2000 Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests
  • 22/30412523 DC BS EN ISO 22477-2. Geotechnical investigation and testing. Testing of geotechnical structures. Part 2. Testing of piles. Static tension load testing

KR-KS, Test 1 Test 2 Test 3

International Electrotechnical Commission (IEC), Test 1 Test 2 Test 3

European Committee for Standardization (CEN), Test 1 Test 2 Test 3

  • EN ISO 22477-2:2023 Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: static tension load testing (ISO 22477-2:2023)
  • CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007
  • PD CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007
  • EN ISO 3452-3:2013 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks
  • FprEN ISO 22477-2 Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: static tension load testing (ISO/FDIS 22477-2:2023)

IPC - Association Connecting Electronics Industries, Test 1 Test 2 Test 3

Japanese Industrial Standards Committee (JISC), Test 1 Test 2 Test 3

RO-ASRO, Test 1 Test 2 Test 3

American Society of Mechanical Engineers (ASME), Test 1 Test 2 Test 3

  • ASME N-467-2001 Testing of Elevated Temperature Components, Classes 2 and 3 Section III, Division 1

CZ-CSN, Test 1 Test 2 Test 3

TR-TSE, Test 1 Test 2 Test 3

  • TS 3009-1978 High - Voltage Test Techniques Part: 2 Test Procedures

Canadian Standards Association (CSA), Test 1 Test 2 Test 3

  • CSA CEI 61000-4-28-01-CAN/CSA AMD 1-2003 Amendement 1 Compatibilite Electromagnetique (CEM) - Partie 4-28: Techniques D'essai Et De Mesure - Essai D'immunite A La Variation De La Frequence D'alimentation Premiere Edition

Electronic Components, Assemblies and Materials Association, Test 1 Test 2 Test 3

ECIA - Electronic Components Industry Association, Test 1 Test 2 Test 3

  • 300-1964 "3"" Image Orthicons@ Methods of Test for"

YU-JUS, Test 1 Test 2 Test 3

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test 1 Test 2 Test 3

  • GB/T 26857.1-2011 Information technology.Open systems interconnection.Methods for testing and specification(MTS).The testing and test control notation.Version 3.Part 1:TTCN-3 core language

  Test 1 Test 2 Test 3, Environmental Conditions and Environmental Testing for Communications Equipment Parts 1-3.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved