ZH

KR

JP

ES

RU

DE

UV test principle

UV test principle, Total:500 items.

In the international standard classification, UV test principle involves: Products of the chemical industry, Terminology (principles and coordination), Products of the textile industry, Construction materials, Solar energy engineering, Vocabularies, Environmental testing, Analytical chemistry, Farming and forestry, Organic chemicals, Ceramics, Occupational safety. Industrial hygiene, Petroleum products in general, Optical equipment, Glass, Non-destructive testing, Water quality, Electrical and electronic testing, Materials for aerospace construction, Plastics, Road vehicle systems, Surface treatment and coating, Non-ferrous metals, Adhesives, Space systems and operations, Integrated circuits. Microelectronics, Protective equipment, Road engineering, Installations in buildings, Components and accessories for telecommunications equipment, Construction equipment, Elements of buildings, Inorganic chemicals, Soil quality. Pedology, Clothes, Fuels, Machine tools, Wood technology processes, Internal combustion engines for road vehicles, Lubricants, industrial oils and related products, Optics and optical measurements, Air quality, Fibre optic communications, Company organization and management, Metalliferous minerals, Rubber, Paints and varnishes, General methods of tests and analysis for food products, Medical equipment, Insulation, Paper and board, Nuclear energy engineering, Rubber and plastics products, Cereals, pulses and derived products, Prepackaged and prepared foods, Bearings, Semiconductor devices, Laboratory medicine, Freight distribution of goods, Semiconducting materials, Milk and milk products, Test conditions and procedures in general, Leather technology, Textile fibres, Microbiology, Natural gas, Metrology and measurement in general, Energy and heat transfer engineering in general.


Professional Standard - Chemical Industry, UV test principle

  • HG/T 4735-2014 Textile dyeing and finishing auxiliaries.Ultraviolet resistant finishing agent.Evaluation for solar ultraviolet radiation protective properties

Hunan Provincial Standard of the People's Republic of China, UV test principle

Korean Agency for Technology and Standards (KATS), UV test principle

  • KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
  • KS K 0850-2014 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
  • KS K 0850-2023 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
  • KS C IEC 61345-2002(2017) UV test for photovoltaic(PV) modules
  • KS C IEC 61345-2002(2022) UV test for photovoltaic(PV) modules
  • KS C IEC 61345-2022 UV test for photovoltaic(PV) modules
  • KS B 5570-2017 Performance test for UV/Vis spectrophotometer
  • KS B 5570-2022 Performance test for UV/Vis spectrophotometer
  • KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
  • KS K 0850-2019 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
  • KS I ISO 11369:2008 Water quality-Determination of selected plant treatment agents-Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • KS I ISO 11369-2018 Water quality-Determination of selected plant treatment agents-Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • KS I ISO 11369-2008(2018) Water quality-Determination of selected plant treatment agents-Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • KS K 0105-2017 General principles of physical testing methods for textiles
  • KS D 8341-2-2002 Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys-Part 2:Test for light fastness to ultra-violet lignt
  • KS D ISO 22779:2009 Metallic coatings-Physical vapour-deposited coatings of aluminium-Specification and test methods
  • KS D ISO 22779:2013 Metallic coatings-Physical vapour-deposited coatings of aluminium-Specification and test methods
  • KS P ISO 15197:2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • KS A IEC 60300-3-5-2003(2018) Reliability Management - Part 3 - Section 5: Application Guidelines - Reliability Test Conditions and Statistical Test Principles

Danish Standards Foundation, UV test principle

  • DS/EN 61345:1999 UV test for photovoltaic (PV) modules
  • DS/IEC 61196-1-212:2021 Coaxial communication cables – Part 1-212: Environmental test methods – UV stability
  • DS/EN ISO 11369:1998 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • DS/EN 13758-1+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
  • DS/CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure
  • DS/EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • DS/EN 12396-3:2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method
  • DS/ISO/TR 15070/Amd. 2:2012 Series 1 freight containers - Rationale for structural test criteria
  • DS/ISO/TR 15070:2000 Series 1 freight containers - Rationale for structural test criteria
  • DS/EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

AENOR, UV test principle

  • UNE-EN 61345:1999 UV TEST FOR PHOTOVOLTAIC (PV) MODULES.
  • UNE 77401:1992 ECOTOXICOLOGY. DETERMINATION OF UV-VIS ABSORPTION SPECTRA.
  • UNE 84124:2014 Cosmetic raw materials. Determination of UV-filters by spectrophotometric absorbance.
  • UNE-EN 13758-1:2002+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
  • UNE-EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
  • UNE-EN ISO 11369:1998 WATER QUALITY. DETERMINATION OF SELECTED PLANT TREATMENT AGENTS. METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH UV DETECTION AFTER SOLID-LIQUID EXTRACTION. (ISO 11369:1997).
  • UNE-EN 12396-3:2001 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Part 3: UV spectrometric xanthogenate method.
  • UNE 200001-3-5:2002 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles.

Taiwan Provincial Standard of the People's Republic of China, UV test principle

British Standards Institution (BSI), UV test principle

  • BS EN 61345:1998 UV test for photovoltaic (PV) modules
  • BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
  • BS EN 16602-70-06:2014 Space product assurance. Particle and UV radiation testing for space materials
  • BS EN 14187-8:2017 Cold applied joint sealants. Test methods. Determination of the artificial weathering by UV-irradiation
  • BS EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • BS EN 13523-10:2017 Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
  • BS EN ISO 11369:1997(2008)*BS 6068-2.61:1997 Water quality — Determination of selected plant treatment agents — Method using high performance liquid chromatography with UV detection after solid - liquid extraction
  • BS ISO 10880:2017 Non-destructive testing. Infrared thermographic testing. General principles
  • BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
  • BS EN 14187-8:2003 Cold applied joint sealants - Test method for the determination of the artificial weathering by UV-irradiation
  • BS 8628:2022 Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal…
  • BS EN 14897:2006 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • BS EN 50289-4-17:2015 Communication cables. Specifications for test methods. Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
  • BS EN ISO 11369:1997 Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • 21/30390982 DC BS 8628. Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal...
  • BS 684-1.15:1990(1999)*ISO 4656:1989 Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.15 Determination of ultraviolet absorbance
  • BS PD CEN/TR 15046:2005 Wood preservatives-Artificial weathering of treated wood prior to biological testing-UV-radiation and water-spraying procedure
  • 20/30422444 DC BS IEC 61196-1-212. Coaxial communication cables. Part 1-212. Environmental test methods. UV stability
  • 22/30466943 DC BS EN 60794-1-214. Optical fibre cables - Part 1-214. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
  • BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
  • 23/30477717 DC BS EN 13523-10. Coil coated metals. Test methods - Part 10. Resistance to fluorescent UV radiation and water condensation
  • 23/30468403 DC BS EN IEC 60068-2-87. Environmental Testing - Part 2-87. Tests-Test xx: UV-C Exposure of Materials and Components to Simulate Ultraviolet Germicidal Irradiation or Other Applications
  • BS EN ISO 105-J01:2000 Textiles - Tests for colour fastness - General principles for measurement of surface colour
  • 20/30401630 DC BS ISO 22290. Non-destructive testing. Infrared thermographic testing. Thermoelastic stress measuring method. General Principles
  • ASTM D5904-02(2024) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • 23/30476027 DC BS EN IEC 60794-1-214. Optical fibre cables. Part 1-214. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
  • BS ISO 21250-1:2020 Rolling bearings. Noise testing of rolling bearing greases - Basic principles, testing assembly and test machine
  • BS IEC 60747-14-11:2021 Semiconductor devices - Semiconductor sensors. Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
  • BS EN ISO 14720-1:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Infrared measurement methods
  • BS EN 14340:2004 Leather - Physical and mechanical tests - Determination of water repellency of garment leather
  • BS 3900-F19:2000 Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light - Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/hum

GSO, UV test principle

  • GSO IEC 61345:2015 UV test for photovoltaic (PV) modules
  • BH GSO IEC 61345:2016 UV test for photovoltaic (PV) modules
  • GSO ISO 24442:2013 Cosmetics -Sun protection test methods - In vivo determination of sunscreen UVA protection
  • GSO ISO 18669-2:2013 Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles
  • GSO ISO 6621-2:2013 Internal combustion engines -- Piston rings -- Part 2: Inspection measuring principles
  • OS GSO ISO 10677:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Ultraviolet light source for testing semiconducting photocatalytic materials
  • GSO IEC 60300-3-5:2015 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
  • OS GSO IEC 60300-3-5:2015 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
  • BH GSO IEC 60300-3-5:2016 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
  • GSO ISO 10677:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Ultraviolet light source for testing semiconducting photocatalytic materials
  • OS GSO ISO 15197:2014 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • BH GSO ISO 15197:2015 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • BH GSO ISO/TR 15070:2016 Series 1 freight containers -- Rationale for structural test criteria
  • OS GSO ISO 20776-1:2016 Clinical laboratory testing and in vitro diagnostic test systems -- Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Reference method for testing the in vitro activity of ...
  • BH GSO ISO 20776-1:2017 Clinical laboratory testing and in vitro diagnostic test systems -- Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Reference method for testing the in vitro activity of ...
  • GSO ISO 20776-1:2016 Clinical laboratory testing and in vitro diagnostic test systems -- Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Reference method for testing the in vitro activity of ...
  • GSO ISO 21250-1:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
  • BH GSO ISO 21250-1:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine

SCC, UV test principle

  • CEI EN 61345:1999 UV test for photovoltaic (PV) modules
  • DANSK DS/EN 61345:1998 UV test for photovoltaic (PV) modules
  • UNE 84124:2000 Cosmetic raw materials. Determination of UV-filters by spectrophotometric absorbance.
  • DIN 66054:2017 Comparative testing - Technical principles
  • NS-EN 16602-70-06:2014 Space product assurance — Particle and UV radiation testing for space materials
  • DIN 66054 E:2016 Draft Document - Comparative testing - Technical principles
  • BS 7914:1998 Method of test for penetration of erythemally weighted solar ultraviolet radiation through clothing fabrics
  • SN-CEN/TR 15046:2005 Wood preservatives — Artificial weathering of treated wood prior to biological testing — UV-radiation and water-spraying procedure
  • DIN EN 16602-70-06 E:2014 Draft Document - Space product assurance - Particle and UV radiation testing for space materials; English version FprEN 16602-70-06:2013
  • DIN 51451 E:2019 Draft Document - Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN EN 14836 E:2017 Draft Document - Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for the determination of the resistance to exposure to ultra violet light artificial weathering; German and English version prEN 14836:2017
  • UNE-EN 13758-1:2002 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics.
  • DANSK DS/EN 14187-8:2017 Cold applied joint sealants – Test methods – Part 8: Determination of the artificial weathering by UV-irradiation
  • UNE-EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • DANSK DS/EN 13523-10:2010 Coil coated metals – Test methods – Part 10: Resistance to fluorescent UV radiation and water condensation
  • DIN 53545:2016 Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
  • DIN EN 14187-8 E:2014 Draft Document - Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation; German version prEN 14187-8:2014
  • DIN 2384:2020 Thermal energy storage - Terminology, requirements, parameters, test principles
  • NS-EN 14187-8:2017 Cold applied joint sealants — Test methods — Part 8: Determination of the artificial weathering by UV-irradiation
  • UNE-EN 14187-8:2004 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • DANSK DS/EN ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • DIN 51350-1 E:2014 Draft Document - Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN EN 50289-4-17 E:2014 Draft Document - Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable; German version FprEN 50289-4-17:2014
  • DIN EN 13523-10 E:2015 Draft Document - Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2015
  • DIN IEC 61196-1-212 E:2006 Draft Document - Coaxial communication cables - Environmental test methods - Part 1-212: UV-resistance (IEC 46A/774A/CD:2005)
  • DIN EN 4057-307 E:2002 Draft Document - Aerospace series - Cable ties for harnesses; Test methods - Part 307: Resistance to ultra violet radiation
  • DANSK DS/CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure
  • DIN 53545 E:2016 Draft Document - Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
  • AENOR UNE-EN 13523-10:2017 Painted metals in continuous band. Test methods. Part 10: Resistance to ultraviolet fluorescent radiation and water condensation.
  • NS-EN 14187-8:2003 Cold applied joint sealants — Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • DIN 18516-1 E:2009 Draft Document - Cladding for externals walls, ventilated at rear - Part 1: Requirements, principles of testing
  • CEI 56-46:2005 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
  • NS-EN ISO 11369:1997 Water quality — Determination of selected plant treatment agents — Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
  • AENOR UNE-EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
  • DANSK DS/EN 12396-3:2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method
  • NS-EN 12396-3:2000 Non-fatty foods — Determination of dithiocarbamate and thiuram disulfide residues — Part 3: UV spectrometric xanthogenate method
  • AENOR UNE-EN 50289-4-17:2016 Communication cables. Specifications for test methods. Part 4-17: Test methods for the evaluation of the UV resistance of the sheath of electrical cables and fiber optic cables.
  • UNE-EN 14897:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • NS-EN 14897:2006 Water conditioning equipment inside buildings — Devices using mercury low-pressure ultraviolet radiators — Requirements for performance, safety and testing
  • CAN/CSA-ISO 15197:2005(R2010) In Vitro Diagnostic Test Systems - Requirements for Blood-Glucose Monitoring Systems for Self-Testing in Managing Diabetes Mellitus
  • BS EN ISO 20846:2004 Methods of test for petroleum and its products. BS 2000-490: Petroleum products. Determination of sulfur content of liquid petroleum products. Ultraviolet fluorescence method
  • DANSK DS/EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • DIN 51819-1 E:2016 Draft Document - Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
  • ASHRAE 185.2-2020 Standard 185.2-2020 -- Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces (ANSI Approved)
  • NS-EN ISO 20776-1:2006 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 1: Reference method for testing the in vitro activity of an...

Professional Standard - Environmental Protection, UV test principle

  • HJ 756-2015 Determination of water quality butyl xanthate by UV spectrophotometry
  • HJ 970-2018 Water Quality Determination of Petroleum by UV Spectrophotometry (Trial)
  • HJ/T 346-2007 Water quality. Determination of nitrate-nitrogen. Ultraviolet spectrophotometry

Military Standard of the People's Republic of China-General Armament Department, UV test principle

  • GJB 7361-2011 The measuring methods for parameters of military ultraviolet detectors
  • GJB 8127-2013 Measuring methods for parameters of ultraviolet focal plane arrays
  • GJB 6925-2009 The measurement method of ultrabiolet radiation for target and environment
  • GJB 772.407-1989 Explosives test methods: UV spectrophotometric determination of components of TNT/RDX injected explosives
  • GJB 5206-2004 Missile flight test external test data collection and processing
  • GJB 3289-1998 Satellite electrical performance test fault prevention and handling principles
  • GJB 2251-1994 Regulations on preparation of data processing report after missile flight test external test

YU-JUS, UV test principle

  • JUS N.M1.030-1983 Safety requirements. Appliances for skin treatment by ultra-violet and infra-red radiation. Particular technical conditions and tests

American Society for Testing and Materials (ASTM), UV test principle

  • ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM D6544-12 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
  • ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D2008-12(2018) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
  • ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D4839-03(2024) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D7183-18 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18a(2023) Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18a Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
  • ASTM D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18ae1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1768-89(2003) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D4779-93 Standard Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
  • ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
  • ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM C1514-08(2017) Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
  • ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM C1514-02 Standard Test Method for Measurement of 235U Fraction using the Enrichment Meter Principle
  • ASTM D6317-98(2009) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D4587-01 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
  • ASTM C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
  • ASTM D458-85(1998) Standard practice for testing paints and related coatings and materials using fluorescent ultraviolet exposure devices
  • ASTM D4587-11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM F1188-00 Standard Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption
  • ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D8534-23 Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector
  • ASTM E878-01 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
  • ASTM E878-96 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
  • ASTM E3179-18 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
  • ASTM E878-11 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
  • ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
  • ASTM D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM E878-01(2005) Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
  • ASTM D6317-98 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D6317-98(2004) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM D7620-10(2015) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

Lithuanian Standards Office , UV test principle

  • LST EN 61345-2001 UV test for photovoltaic (PV) modules (IEC 61345:1998)
  • LST EN 13758-1+A1-2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
  • LST EN ISO 11369:2000 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
  • LST EN 14187-8-2004 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • LST EN 12396-3-2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method

National Metrological Technical Specifications of the People's Republic of China, UV test principle

  • JJF(纺织) 081-2018 Calibration Specification for Textiles Solar Ultraviolet Radiation Protective Properties Testers
  • JJF(纺织)081-2018 Calibration Specification for Textiles Solar Ultraviolet Radiation Protective Properties Testers

AT-ON, UV test principle

  • ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation
  • ONORM M 5873-1-2001 Plants for the disinfection of water using ultraviolet radiation - Requirements and testing - Low pressure mercury lamp plants

Professional Standard - Agriculture, UV test principle

  • NY/T 1860.5-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 5:Ultraviolet / visibility absorption
  • NY/T 1860.5-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 5:Ultraviolet/Visibility absorption
  • NY/T 1860.3-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 3:Appearance
  • NY/T 1860.3-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 3:Appearance
  • NY/T 1860.4-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 4:Technical material stability

NZ-SNZ, UV test principle

  • AS/NZS 4547.5:2004 Methods of testing wool packs for greasy wool Method 5: Strength of fabric after exposure to ultraviolet radiation
  • AS/NZS 1580.483.2:1994 Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV-Condensation Type Instruments

国家市场监督管理总局、中国国家标准化管理委员会, UV test principle

  • GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4:Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
  • GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
  • GB/T 6324.10-2020 Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV test principle

  • GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
  • GB/T 15489.8-1995 Colour filter glass test methods Resistance UV irradiating stability
  • GB/T 7962.17-2010 Test methods of colourless optical glass.Part 17:Autocollimation test method for refractive index in the ultraviolet and infrared wave band
  • GB/T 12843-1991 General principle of measuring methods of microprocessors and peripheral interface circuits' parameters for semiconductor integrated circuits
  • GB 12843-1991 Basic principles of electrical parameter testing methods for semiconductor integrated circuit microprocessors and peripheral interface circuits
  • GB/T 14028-1992 General principles of measuring methods of analogue switches for semiconductor integrated circuits
  • GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
  • GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
  • GB 14028-2018 Basic principles of semiconductor integrated circuit analog switch test methods
  • GB/T 27577-2011 Determination of vitamin B (pantothenic acid) and provitamin B (D-fantothenol) in cosmetics.HPLC/UV and HPLC MS/MS
  • GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
  • GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
  • GB/T 14031-1992 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
  • GB/T 14032-1992 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
  • GB/T 14029-1992 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
  • GB 14029-1992 Basic principles of semiconductor integrated circuit analog multiplier testing methods
  • GB 14031-1992 Basic principles of semiconductor integrated circuit analog phase-locked loop testing methods
  • GB 14032-1992 Basic principles of digital phase-locked loop testing methods for semiconductor integrated circuits

Occupational Health Standard of the People's Republic of China, UV test principle

  • GBZ/T 189.6-2007 Measurement of Physical Agents in Workplace Part 6:Ultraviolet Radiation

Japanese Industrial Standards Committee (JISC), UV test principle

  • JIS K 2541-6:2003 Crude oil and petroleum products -- Determination of sulfur content Part 6: Ultraviolet fluorescence method
  • JIS K 2541-6:2013 Crude petroleum and petroleum products.Determination of sulfur content Part 6: Ultraviolet fluorescence method
  • JIS Z 2359:2021 Principle of strain gauge testing
  • JIS K 5600-7-8:1999 Testing methods for paints -- Part 7: Long-period performance of film -- Section 8: Accelerated weathering (Exposure to fluorescent UV lamps)
  • JIS C 60664-1:2009 Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
  • JIS K 5600-4-4 ERRATUM 1:2002 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 4: Colorimetry (Principles) (Erratum 1)

Tianjin Provincial Standard of the People's Republic of China, UV test principle

  • DB12/T 885-2019 Determination of Proanthocyanidins in Plant Extracts by UV/Vis Spectrophotometry

International Organization for Standardization (ISO), UV test principle

  • ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
  • ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection
  • ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
  • ISO 21250-1:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine

Professional Standard - Electron, UV test principle

  • SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method
  • SJ/T 11818.1-2022 Semiconductor UV-emitting diodes Part 1: Test methods
  • SJ/T 10802-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for peripheral drivers
  • SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
  • SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
  • SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
  • SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
  • SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
  • SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
  • SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
  • SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
  • SJ 20961-2006 General principles of measuring methods of A/D and D/A converters for integrated circuits
  • SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits

SE-SIS, UV test principle

European Committee for Electrotechnical Standardization(CENELEC), UV test principle

  • EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

CENELEC - European Committee for Electrotechnical Standardization, UV test principle

  • EN 61228:1994 Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning (Incorporates Amendment A1: 1996)

CN-QIYE, UV test principle

  • Q/GDW 1978-2013 Ultraviolet imaging detection method for electric fittings corona test

Professional Standard - Aerospace, UV test principle

Group Standards of the People's Republic of China, UV test principle

  • T/GAMA 29-2023 Optical performance testing method for 3D printed UV projectors
  • T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
  • T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
  • T/CSAE 72-2018 Test and evaluation method for uv penetration resistance of automotive coatings
  • T/SHRH 044-2022 Testing method for repairing and relieving efficacies of cosmetics based on UV induced skin erythema model
  • T/BSPT 003-2018 Performance test method for fine particulate matter (PM2.5 )mass concentration measurement instruments based on light scattering principle
  • T/SHRH 031-2020 Anti-wrinkly and Firming Lifting Efficacy Test of Cosmetics - In vitro test Method of Collagen I Contents with fibroblasts

ES-AENOR, UV test principle

  • UNE 77-401-1992 Ecotoxicology. Determination of UV-VIS absorption spectra of a chemical compoud

ZA-SANS, UV test principle

  • SANS 6320:2003 Textiles - Solar UV protective properties - Method of test for apparel fabrics
  • SANS 1833-1:2007 Textiles - Quantitative chemical analysis Part 1: General principles of testing

ECSS - European Cooperation for Space Standardization, UV test principle

  • Q-ST-70-06C-2008 Particle and UV radiation testing for space materials (First Issue)

海关总署, UV test principle

  • SN/T 5425-2022 Determination of salicylate anti-UV finishing agents for imported and exported textiles

PL-PKN, UV test principle

  • PN P04990-1989 Methods of chemical tests Knitted medical articles Determination of ultraviolet radiation absorbance
  • PN F06100-08-1988 Furniture Testing methods for the properties of lacquered and decorative luminated surfaces Determination of ultraviolet light resistance and light resistance degree
  • PN Z04171-02-1986 Air purity protection ests for picric acid etermination of picric acid n work places by UV pectrophotometry absorption
  • PN Z04200-02-1988 Air purity protection ests for oxalic acid etermination of oxalic acid by ltraviolet absorption spectrophotometry
  • PN M34140-07-1987 Installations for the water treatment Installations for the filtration in the precoat filters Re?uirements and tests
  • PN Z04169-02-1986 Air purity.protection Tests for 4,6-dinitroorthocreso! Determination of 4,6-dinitroorthocresol in work places by UV spectrophotometry absorption

未注明发布机构, UV test principle

  • DIN 19294-1 E:2019-04 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
  • ANSI/EIA 364-49:2013(2019) TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets
  • DIN 51451 E:2019-03 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN EN 16602-70-06 E:2014-01 Space product assurance - Particle and UV radiation testing for space materials
  • ASTM RR-D02-1375 1995 D1840-Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM RR-D02-1525 2002 D1840- Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • DIN 19294-3 E:2019-04 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
  • DIN 50942:1996 Phosphating of metals – process principles, test methods
  • ASTM RR-D16-1035 2007 D7183-Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM RR-D16-1060 2016 D7183-Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM RR-D02-1506 2001 D6667-Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM RR-D02-1784 2014 D6667-Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM RR-C24-1022 1987 C0718- Test Method for Ultraviolet (UV)-Cold Box Exposure of OnePart, Elastomeric, Solvent-Release Type Sealants
  • DIN 2384 E:2019-10 Thermal energy storage - Terminology, requirements, parameters, test principles
  • AS 3558.5:1999(R2016) Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of degradation by ultraviolet light
  • ASTM RR-C24-1002 1972 C0718- Test Method for Ultraviolet (UV )-Cold Box Exposure of One- Part, Elastomeric, Solvent-Release Type Sealants
  • DIN EN 14836 E:2015-03 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for the determination of the resistance to exposure to ultra violet light artificial weathering
  • ASTM RR-D02-1705 2010 D2892- Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • ASTM RR-D02-1701 2010 D7620-Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM RR-D19-1163 1998 D5997-Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM RR-E35-1012 2018 E3179-Test Method for Standard Method for Determining Antiviral Efficacy of Ultraviolet Germicidal Irradiation Against Influenza Virus on Surfaces
  • DIN 53545 E:2016-05 Determination of low-temperature behaviour of elastomers; principles and test methods
  • ASTM RR-D19-1156 1997 D5904-Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • DIN EN 14187-8 E:2001-09 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
  • DIN EN 14187-8 E:2014-12 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
  • DIN 51819-1 E:2016-02 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
  • ASTM RR-D13-1136 2012 D5867-Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • DIN EN 14897 E:2004-05 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • DIN 51821-1 E:2015-11 Testing of lubricants - Test using the FAG roller bearing grease testing apparatus FE9 - Part 1: General working principles

German Institute for Standardization, UV test principle

  • DIN 19294-1:2020 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
  • DIN 19294-1:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
  • DIN 66054:2017-08 Comparative testing - Technical principles
  • DIN EN 16602-70-06:2015-01 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
  • DIN 19294-3:2020 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
  • DIN 19294-3:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
  • DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN 18516-1:2010 Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing
  • DIN ISO 11271:2003 Soil quality - Determination of redox potential - Field method (ISO 11271:2002)
  • DIN EN 13758-1:2007-03 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
  • DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN EN 13523-10:2023-08 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-10 (2017-05).
  • DIN EN 13523-10:2017-05 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
  • DIN EN 13523-10:2023 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023
  • DIN EN 14836:2017 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for the determination of the resistance to exposure to ultra violet light artificial weathering; German and English version prEN 14836:2017
  • DIN 18516-1:2010-06 Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing
  • DIN 2384:2020-10 Thermal energy storage - Terminology, requirements, parameters, test principles
  • DIN-Fachbericht CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure; English version CEN/TR 15046:2005
  • DIN EN 14897:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing(includes Amendment A1:2007) English version of DIN EN 14897:2007-09
  • DIN 54270-1:1976-09 Testing of textiles; determination of the limit-viscosity of celluloses, principles
  • DIN EN 14187-8:2017-07 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2017
  • DIN 18516-1:1999 Cladding for externals walls, ventilated at rear - Part 1: Requirements, principles of testing
  • DIN EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
  • DIN EN ISO 11369:1997-11 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997
  • DIN 53863-1:1960-12 Testing of textiles; abrasion test methods for textile planar fabrics, principles
  • DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN 51451:2024-03 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN EN 12396-3:2000-10 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000
  • DIN EN 12373-8:1999 Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998
  • DIN 53545:2016-12 Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
  • DIN EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003
  • DIN EN 14897:2007-09 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing; German version EN 14897:2006+A1:2007
  • DIN 51819-1:2016-12 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
  • DIN EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011); German version EN ISO 24442:2011
  • DIN 51821-1:2016-07 Testing of lubricants - Test using the FAG roller bearing grease testing apparatus FE9 - Part 1: General working principles
  • DIN EN ISO 15197:2015-12 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013); German version EN ISO 15197:2015 / Note: DIN EN ISO 15197 (2013-11) remains valid alongside this stand...
  • DIN 51834-1:2010-11 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
  • DIN ISO 21250-1:2022-12 Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020); Text in German and English / Note: Date of issue 2022-10-28

FI-SFS, UV test principle

RU-GOST R, UV test principle

  • GOST R 25645.338-1996 Polymeric materials for space technique. Requirements for ultraviolet radiation stability tests
  • GOST R 55031-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of stability to ultra-violet radiation
  • GOST R 8.640-2008 State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods

Electronic Components, Assemblies and Materials Association, UV test principle

  • ECA EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets

ECIA - Electronic Components Industry Association, UV test principle

  • EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets
  • TEP146-1964 Philosophy of Vibration Testing of Receiving Tubes (TEP46)

PT-IPQ, UV test principle

  • NP EN 12373-8-2001 Aluminium and aluminium alloys Anodizing Part 8:Determination of the comparative fastness to ultra-voilet light and heat of coloured anodic oxidation coatings

Professional Standard - Machinery, UV test principle

  • JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography

Association Francaise de Normalisation, UV test principle

  • FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
  • NF L90-200-70-06*NF EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials
  • NF ISO 10677:2011 Céramiques techniques - Sources lumineuses UV destinée aux essais des matériaux photocatalytiques semi-conducteurs
  • FD CEN/TR 15046:2005 Wood preservative products - Artificial exposure to weathering of treated wood before biological tests - UV radiation and water spray tests
  • FD ISO/TR 21582:2021 Pyrogenicity - Principles and test methods for the detection of pyrogens on medical devices
  • NF EN 16602-70-06:2015 Assurance produit des projets spatiaux - Essais d'irradiation et aux ultraviolets pour matériaux d'un projet spatial
  • NF T75-613*NF EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection.
  • NF EN 14187-8:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 8 : détermination du vieillissement artificiel par rayonnement UV
  • NF EN 13523-10:2017 Pre-painted sheets - Test methods - Part 10: resistance to fluorescent UV radiation and water condensation
  • NF EN 14897+A1:2007 Water treatment devices inside buildings - Devices using mercury heaters and low pressure UV radiation - Performance, safety and testing requirements
  • NF EN 14897/IN1:2007 Water treatment devices inside buildings - Devices using mercury heaters and low pressure UV radiation - Performance, safety and testing requirements
  • FD X41-573*FD CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure
  • NF EN 3475-706:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 706 : marquabilité laser UV
  • NF EN 13758-1+A1:2007 Textiles - Protective properties against solar UV radiation - Part 1: test method for fabrics intended for clothing
  • NF EN 13758-1/IN1:2007 Textiles - Protective properties against solar UV radiation - Part 1: test method for fabrics intended for clothing
  • NF EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of acoustic emission testing for the detection of corrosion in a metal enclosure filled with liquid
  • NF P98-897-8*NF EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8 : determination of the artificial weathering by UV-irradiation
  • NF B44-103*NF ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
  • NF EN ISO 11369:1997 Water quality - Dosage of certain plant treatment agents - High performance liquid chromatography (HPLC) method with UV detection after solid-liquid extraction
  • NF P98-897-8:2003 Cold applied joint sealants - Part 8 : test method for the determination of the artificial weathering by UV-irradiation.
  • NF P41-605/IN1*NF EN 14897/IN1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • NF P41-605*NF EN 14897+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • NF EN 12396-3:2000 Non-fatty foods - Determination of residues of dithiocarbamates and thiuram disulphides - Part 3: UV spectrometric method using xanthogenate
  • NF Q03-038:1983 Paper and board tests. Measurement of diffuse reflectance factor. General principles.
  • XP P94-065:2023 Soils: recognition and tests - Hole Erosion Test - Principle and laboratory test method for determining the erosion resistance characteristics of conduits
  • NF S92-026*NF EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • NF EN ISO 14720-1:2013 Testing of raw materials for refractory products - Determination of sulfur in non-oxidizing raw materials in the form of powder and granules - Part 1: infrared test methods
  • NF EN ISO 20776-2:2022 Laboratory testing and in vitro diagnostic systems - In vitro susceptibility of infectious agents and performance evaluation of antibiogram devices - Part 2: performance evaluation of antibiogram devices...

GM North America, UV test principle

  • GM GMP.PP.094-2003 Polypropylene (PP), 20% Talc Filled, UV Stabilized, Copolymer, ISO Tests
  • GMP.PP.107-2011 Polypropylene ?High Impact Copolymer, UV Stable, ISO Tests Issue 2; Do Not Use on New Programs; Replaced by GMW16208

ES-UNE, UV test principle

  • UNE-EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials (Endorsed by AENOR in November of 2014.)
  • UNE-EN 4057-307:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation (Endorsed by AENOR in April of 2007.)
  • UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)

European Committee for Standardization (CEN), UV test principle

  • EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials
  • EN ISO 24442:2022 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022)
  • EN ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011)
  • CEN EN 13523-10-2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
  • CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure
  • EN ISO 11369:1997 Water Quality - Determination of Selected Plant Treatment Agents - Method Using High Performance Liquid Chromatography with UV Detection After Solid-Liquid Extraction ISO 11369: 1997
  • PD CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure
  • EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
  • EN ISO 6581:2010 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010)
  • EN ISO 11985:1997 Ophthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation (in Vitro Method) ISO 11985:1997
  • EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • EN 15891:2010 Foodstuffs - Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and UV detection
  • EN 12396-3:2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method
  • EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • EN 14340:2004 Leather - Physical and mechanical tests - Determination of water repellency of garment leather
  • EN 14897:2006 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing (Incorporates Amendment A1: 2007)

International Electrotechnical Commission (IEC), UV test principle

  • IEC 61196-1-212:2021 Coaxial communication cables - Part 1-212: Environmental test methods - UV stability

Indonesia Standards, UV test principle

CEN - European Committee for Standardization, UV test principle

  • EN ISO 6581:2018 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings

Society of Automotive Engineers (SAE), UV test principle

  • SAE AMS2368B-2007 Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
  • SAE AMS2368A-2002 Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
  • SAE AMS2368E-2022 Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
  • SAE AMS2368C-2012 Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock

国家质量监督检验检疫总局, UV test principle

  • SN/T 4665-2016 Determination of benzophenone anti-UV finishing agents for imported and exported textiles by high performance liquid chromatography
  • SN/T 4664-2016 Determination of benzotriazole anti-UV finishing agents for imported and exported textiles by high performance liquid chromatography

US-CFR-file, UV test principle

  • CFR 40-1065.272-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.272:Nondispersive ultraviolet analyzer.

IT-UNI, UV test principle

  • UNI 7691-1977 Elastomeric Materials: Testing of Vulcanized Materials, Determination of Styrene by UV Spectrophotometry

CZ-CSN, UV test principle

  • CSN ISO 6581:1993 Anodizing of aluminium and its alloys. Determinatíon of the fastness to ultra-violet light of coloured anodk oxide coatings

Professional Standard - Petroleum, UV test principle

  • SY/T 6009.9-2003 Test method of samples of geochemical exploration for oil and gas Part 9:Determination of the gross amount of aromatic hydrocarbons and their ramifications Ultraviolet spectroscopy

(U.S.) Plastic Pipe Association, UV test principle

  • PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND

Standard Association of Australia (SAA), UV test principle

  • AS 3558.5:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of degradation by ultraviolet light
  • AS 1807.23:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of intensity of radiation from germicidal ultraviolet lamps
  • AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
  • AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk
  • AS 1580.603.1:2002(R2013) Test Methods for Paints and Related Materials Surface Preparation General Appearance

SAE - SAE International, UV test principle

  • SAE AMS2368-1995 Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
  • SAE AMS2368D-2017 Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock

KR-KS, UV test principle

  • KS L ISO 10677-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials
  • KS P ISO 15197-2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • KS P ISO 15197-2017(2022) In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

CU-NC, UV test principle

  • NC 34-64-1988 Agricultural Machines and Implements. Roots Harvester Methodology for Test Realization
  • NC 34-65-1989 Agricultural Machineries and Implentents. Mowing Machines and Methodology for Tests Realization
  • NC 34-55-1987 Agricultural Machineries and Implements. Grain Harvesters Methodology for Tests Realization
  • NC 34-62-1988 Agricultural Machineries and Implements. Agricultural Equipment Test. Terms and Definitions
  • NC 34-63-1988 Agricultural Machinery and Impleraents. Furrow-making Machines. Methodology for Test Realization
  • NC 34-50-1987 Agricultural Machineries and Implements. Grai Sower. Methodology for Test Realization
  • NC 34-47-1987 Agricultural Machinery and Elements. Forestry and Agricultural Machines. Methodology for the Determination of Testing Conditions
  • NC 34-48-1987 Agricultural Machinery and Elements. Foresty and Agricultural Machines. Energetic Evaluation. Methodology for its Impleraentation
  • NC 34-54-1987 Agricultural Machineries and Implements. Trailer and Semitrailer. Methodology for Tests Realization
  • NC 34-56-1987 Agricultural Machineries and Implements. Spraying Machines and Dusters. Methodology for Tests Realization
  • NC 34-49-1987 Agricultural Implements and Machineries. Growers for Alternate Cultivation Works. Methodology for Test Realization

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., UV test principle

  • ASHRAE 185.2-2014 Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces

Association of German Mechanical Engineers, UV test principle

  • VDI 3491 Blatt 1-2016 Measurement of particles - Methods for generating test aerosols - Principles and overview
  • VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, UV test principle

  • PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)

American National Standards Institute (ANSI), UV test principle

  • ANSI/ASHRAE 185.2-2020 Includes ANSI/ASHRAE addenda listed in Appendix E Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces

IN-BIS, UV test principle

  • IS 5420 Pt.1-1969 Guide to Test Method Precision Part 1 Principles and Applications
  • IS 1448 Pt.118-1985 Test methods for petroleum and its products [P: 118] Determination of naphthalene hydrocarbons in aviation turbine fuels by ultraviolet spectrophotometry

HU-MSZT, UV test principle

  • MSZ 2105/13-1983 The color of textile raw materials is fixed. Wet treatment, acid, strong rinse effect test
  • MSZ KGST 830-1977 Detection of physical characteristics of wooden raw materials, sampling statistical analysis, conditions and test results

GOSTR, UV test principle

  • GOST ISO 15197-2011 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
  • GOST R ISO 20776-1-2010 Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices. Part 1. Reference method for testing the in vitro activity of antimic




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved