ZH
RU
ES
thread mc
thread mc, Total:498 items.
In the international standard classification, thread mc involves: Fasteners, Electromechanical components for electronic and telecommunications equipment, Screw threads, Fasteners for aerospace construction, Vocabularies, Technical drawings, Cutting tools, Hand-held tools, Valves, Linear and angular measurements, Bottles. Pots. Jars, Aerospace electric equipment and systems, Pipeline components and pipelines, Ground service and maintenance equipment, Materials and components for railway engineering, Rubber and plastics products, Non-ferrous metals, Machine tool systems, Tobacco, tobacco products and related equipment, Cycles.
U.S. Air Force, thread mc
- AIR FORCE MIL-G-25591 E (1)-1987 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
- AIR FORCE MIL-G-25591 E-1981 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
- AIR FORCE MIL-G-25591 E VALID NOTICE 2-2008 Gyroscope, Rate, Switching, Type MC-1
- AIR FORCE MIL-G-25591 E NOTICE 1-1996 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
- AIR FORCE AN926 REV 6-1954 TEE - INTERNAL SCREW THREAD [Use: DLA AN938 REV 6 CANC NOTICE 3, DLA AN938 REV 6 CANC NOTICE 2, DLA AN938 REV 6 VALID NOTICE 1, DLA AN938 REV 6, DLA AN938 REV 4]
Korean Agency for Technology and Standards (KATS), thread mc
(U.S.) Ford Automotive Standards, thread mc
CH-SNV, thread mc
Standard Association of Australia (SAA), thread mc
AT-ON, thread mc
German Institute for Standardization, thread mc
- DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
- DIN 7965:1965 Screwed Inserts (Screw Plugs)
- DIN 7965:1965-09 Screwed Inserts (Screw Plugs)
- DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
- DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
- DIN 7998:1975 Threads and Thread Ends for Wood Screws
- DIN 7998:1975-02 Threads and Thread Ends for Wood Screws
- DIN 16261:2004-07 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: To be replaced by DIN 16261 (2019-07), DIN 16261 (2023-02).
- DIN 16261:2023-02 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: Date of issue 2023-01-13*Intended as replacement for DIN 16261 (2004-07).
- DIN ISO 6410-2:1993 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
- DIN 5606-2:1975-03 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
- DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
- DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
- DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
- DIN 76-3:1977-01 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
- DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
- DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
- DIN 513-1:1985 Metric buttress threads; thread profiles
- DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
- DIN 8140-2:2005 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
- DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
- DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
- DIN 80705:2018-07 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
- DIN 405-3:1997 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
- DIN 5606-2:1975 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
- DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
- DIN 103-2:1977 ISO Metric Trapezoidal Screw Thread; General Plan
- DIN 380-1:1985-04 Stub metric trapezoidal screw threads; thread profiles
- DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
- DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
- DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
- DIN 40431-1:1970 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
- DIN 380-1:1985 Stub metric trapezoidal screw threads; thread profiles
- DIN EN ISO 1478:1999 Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
- DIN 802-5:1997 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
- DIN 30387:1976 Shouldered nuts; metric fine thread, rounded acme thread
- DIN 30387:2007 Shouldered nuts - Metric fine thread, rounded acme thread
- DIN 30387:2007-06 Shouldered nuts - Metric fine thread, rounded acme thread
- DIN ISO 6410-2:1993-12 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
- DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
- DIN 8140-2 Berichtigung 1:2017-03 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
- DIN 20400:1990 Knuckle threads for the mining; threads with large load-bearing depth
- DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
- DIN 2279:2001-12 Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application
- DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
- DIN 852-1:1991 Bore type thread milling cutters for ISO metric threads; dimensions
- DIN 513-1:2020 Metric buttress threads - Part 1: Thread profiles
- DIN 80705:1990 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
- DIN 80705:2018 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
- DIN 3852-11:1994 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
- DIN 81408:1978 Screwing-hooks
- DIN EN 10241:2000 Steel threaded pipe; German version EN 10241:2000
CZ-CSN, thread mc
Association Francaise de Normalisation, thread mc
- NF L05-020:1954 Screw threads. Thread run-outs (rech.).
- NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
- NF L05-020:1966 SCREW THREADS. THREAD RUN-OUTS. (RECH.).
- NF L22-208:1984 Bolt, hexagonal head, threaded to head. ISO thread.
- NF ISO 2901:2016 Filetages métriques trapézoïdaux ISO - Profils de base et nominal
- NF L22-293:1979 Slotted cheese ehad screws, fully threaded. ISO thread.
- NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
- NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
- NF L22-294:1979 Slotted raised cheese head screws, fully threaded. ISO thread.
- NF L05-110:1966 SCREW THREADS. SELECTION FOR AIRCRAFT INDUSTRY. (RECH.).
- NF EN ISO 6410-2:1996 Dessins techniques - Filetages et pièces filetées - Partie 2 : inserts filetés.
- NF L22-291:1979 Slotted 90 degrees countersunk head screws, fully threaded. ISO thread.
- NF L22-292:1979 Slotted 60 degrees countersunk head screws, fully threaded. ISO thread.
- NF L22-298:1979 Hexagon socket head cap screws, fully threaded. ISO thread.
- NF L22-209:1984 Bolt, hexagonal head, with locking hole threaded to head. ISO thread.
- NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
- NF H35-131*NF EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
- NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.
- NF L22-275:1982 Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.
- NF L05-200:1952 Metric screw threads. Sim profile (rech.).
- NF L05-200:1966 METRIC SCREW THREADS. SIM PROFILE. (RECH.).
- NF E25-650-2:1994 TAPPING SCREWS THREAD. (EUROPEAN STANDARD EN ISO 1478).
- NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
- NF E03-152:1981 Thread checking with limit gauges. Threaded gauges for screw.
- NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
- NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
- NF EN 10226-1:2004 Filetages de tuyauterie pour raccordement avec étanchéité par le filetage - Partie 1: filetages extérieurs coniques et filetages intérieurs cylindriques - Dimensions, tolérances et désignation
- NF L05-110:1953 Screw threads. Selection for aircraft industry (rech.).
- NF F00-032:1992 Matériel ferroviaire en général - Filetages à filet rond - Profil.
- NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
- NF E03-056:1970 ISO SYSTEM OF TOLERANCES FOR SCREW THREADS. COARSE QUALITY 7H/8 G FOR SCREWS AND BOLTS.
- NF EN 10226-2:2005 Filetages de tuyauteries pour raccordement avec étanchéité par le filetage - Partie 2 : filetages extérieurs coniques et filetages intérieurs coniques - Dimensions, tolérances et désignation
- NF E03-500*NF ISO 1501:2009 ISO miniature screw threads
- NF L05-420:1955 Buttress screw threads.
- FD E03-003:2006 Screw threads - References of main standardized foreign screw threads
- FD E03-003:2022 Filetages - Références des principaux filetages étrangers normalisés
- NF L22-259:1982 100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.
- NF E03-153:1975 Checking of threads with limit gauges-threaded gauges for nuts.
- NF E25-650-2*NF EN ISO 1478:1999 Tapping screw thread
U.S. Military Regulations and Norms, thread mc
- ARMY MIL-I-45916 B-1975 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING
- ARMY MS35914 REV F-1977 INSERT, SCREW THREAD - THREAD CUTTING
- ARMY A-A-59326/14 B-2011 REDUCER, EXTERNAL PIPE THREAD BY FEMALE, TYPE XIII
- ARMY A-A-59326/12 B-2011 REDUCER, MALE BY FEMALE AND FEMALE BY MALE, TYPE XI
- ARMY A-A-59326/1 B-2011 COUPLING HALF, MALE BY INTERNAL PIPE THREAD, TYPE I
- ARMY A-A-59326/12 A VALID NOTICE 1-2008 REDUCER, MALE BY FEMALE AND FEMALE BY MALE, TYPE XI
SE-SIS, thread mc
- SIS SMS 300-1931
- SIS SMS 1947-1969 Continuous thread studs. Inch screw threads. Coarse pitch
- SIS SS 1702-1980 Screw threads and screw thread tolerances — Terminology
- SIS SMS 1702-1966 Screw threads and screw thread tolerances. Vocabulary
- SIS SMS 572-1971 Short screwing taps. Metric screw threads. Fine pitch
- SIS SMS 571-1971 Short screwing taps. Metric screw threads. Coarse pitch
- SIS SS 1964-1989 Threaded blind holes — ISO metric screw threads — Coarse pitch
- SIS SMS 1964-1976 Threaded blind holes. ISO metric screw threads. Coarse pitch
- SIS SMS 574-1971 Short screwing taps. Inch screw threads. Fine pitch
- SIS SMS 573-1971 Short screwing taps. Inch screw threads. Coarse pitch
- SIS SMS-302-1931
- SIS SMS 491-1973 Taper pins with threaded end. ISO inch screw threads. Coarse pitch
- SIS SMS 87-1973 Taper pins with threaded end. ISO metric screw threads. Coarse pitch
- SIS SMS 1375-1967 Screw lengths, thread lengths. Metric screw threads
- SIS SS 1717-1988 ISO inch screw threads — Selected sizes for screw threads with fine pitch
- SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
- SIS SS 1716-1988 ISO inch screw threads — Selected sizes for screw threads with coarse pitch
- SIS SS 1711-1978 UNC-threads, dimensioned for coating — Thread tolerances
- SIS SS 1712-1978 UNF-threads, dimensioned for coating - Thread tolerances
- SIS SS 2639-1987 Screwing dies - Taper pipe threads R
- SIS SMS 1459-1969 Studs. Nominal lengths. Thread lengths. Metric screw threads. Coarse pitch
- SIS SS 3218-1984 Threaded stainless steel pipe fittings - Barrel nipples with external taper pipe threads
- SIS SMS 2170-1966 Metric screw threads. Tolerances. Deviations for constructional threads
- SIS SMS 273-1929
- SIS SS-ISO 4570/3:1981 Tyre valve threads - Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
- SIS SMS 1719-1958
- SIS SMS 2170-1973 Metric screw threads. Tolerances. Deviations for constructional threads.
- SIS SMS 272-1929
- SIS SMS 2348-1966 Screw threads and threads undercut for shank hooks
- SIS SS-ISO 4570/2:1981 Tyre valve threads - Part 2: Threads 9V1, 10V2, 12V1, 13V1
- SIS SMS 1373-1963
- SIS SS-ISO 1478:1986 Tapping screws thread
- SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
- SIS SMS-305-1931
- SIS SS-ISO 5969:1987 Ground thread taps for pipe threads G and Rp - Tolerances on the threaded portion
- SIS SS 1108-1991 Fittings for piping — Straight nipples forPN 10 — Externally threaded
- SIS SS 1747-1979 Screw calliper gauges — Profiles and tolerances for ISO inch screw threads
- SIS SMS 1968-1969 Run outs and undercuts for externat screw threads unijied screw series
- SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
- SIS SS 1925-1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs
- SIS SMS 36-1972 Parallel pipe threads
- SIS SMS 295-1972 Taper pipe threads
British Standards Institution (BSI), thread mc
- BS EN ISO 6410-2:1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts
- BS 919-2:2007 Screw gauge limits and
tolerances –
Part 2: Specification for gauges for
screw threads of Whitworth and B.A.
forms
- 2A 231-1993 Rolled threads for bolts. Lead and runout requirements
- BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C. E.I. threads)
- BS 84:2007 Parallel screw threads of
Whitworth form –
Requirements
- BS ISO 68-2:1998+A1:2020 ISO general purpose screw threads. Basic profile. Inch screw threads
- BS ISO 68-1:1998+A1:2020 ISO general purpose screw threads. Basic profile. Metric screw threads
- BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
- BS EN ISO 1478:2000 Tapping screw thread
RO-ASRO, thread mc
Taiwan Provincial Standard of the People's Republic of China, thread mc
Defense Logistics Agency, thread mc
- DLA MS35914 REV G-2012 INSERT, SCREW THREAD - THREAD CUTTING
- DLA AN531 REV 5 NOTICE 1-1997 SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
- DLA AN531 REV 5 (1)-1996 SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
- DLA AN531 REV 5-1959 SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
BE-NBN, thread mc
Japanese Industrial Standards Committee (JISC), thread mc
YU-JUS, thread mc
- JUS K.T3.170-1985 Slats in the threaded part of the threaded gauging members
- JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
- JUS M.B1.036-1979 SO internat trapezoidal screw threads, knuckle screw treads and other screw threa?s of coarse pitches. Runouts and undercuts
- JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges
- JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
- JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges
Professional Standard - Aviation, thread mc
- HB 1922-1975 Tapered thread medium diameter thread plug gauge
- HB 1926-1975 Taper thread middle diameter thread ring gauge
- HB 7417-1996 MJ thread short thread small hexagon head bolts
- HB 7417~7420-1996 MJ thread short thread small hex head bolts
- HB 7418-1996 MJ thread short thread small hexagon head bolts
- HB 7418-2013 A286MJ thread short thread small hex head bolts
- HB 7419-1996 MJ thread short thread small hexagon head bolts
- HB 7420-1996 MJ thread short thread small hexagon head bolts
- HB 1924-1975 Tapered thread root high thread plug gauge
- HB 1928-1975 Tapered thread root high thread ring gauge
- HB 4-80-1976 Tapered thread plug
- HB 4265-2004 Internal screw gauge for wire thread insert
- HB 4265-1989 Thread plug gauges for internal threads for mounting wire thread inserts
- HB 247-1972 Taper thread
- HB 4007-1987 Taper thread pith diameter screw thread ring gauge exclusively used for gas cylinders
- HB 4006-1987 Taper thread pith diameter screw thread plug gauge exclusively used for gas cylinders
- HB 246-1975 Screw thread finishing (washout thread, thread margin, undercut, chamfer, ring groove)
- HB 7415-1996 MJ thread polished rod tolerance with f9 short thread hexagon head bolts
- HB 7416-1996 MJ thread polished rod tolerance with r6 short thread hexagon head bolts
- HB 8317-2013 A286 polished rod tolerance band f9MJ thread short thread hexagon head bolt
- HB 1930-1975 Calibration plug gauge for taper thread pitch diameter thread ring gauge
- HB 7422-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
- HB 7424-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
- HB 7421-1996 MJ thread polished rod tolerance band f9 short thread small hexagon head bolts
- HB 7422~7424-1996 MJ thread polished rod tolerance band h8 short thread small hexagon head bolts
- HB 7423-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
- HB 241-1975 Common screw thread
- HB 242-1970 Clearance screw thread
- HB 8287~8290-2002 Threaded bush
IT-UNI, thread mc
FI-SFS, thread mc
Danish Standards Foundation, thread mc
American Society of Mechanical Engineers (ASME), thread mc
NO-SN, thread mc
- NS 1095-1963 UNC-threads for the metal end of studs - Tolerances on the threads
- NS 5321-1977 Hand taps for pipe threads for taper threads
HU-MSZT, thread mc
Professional Standard - Machinery, thread mc
RU-GOST R, thread mc
ZA-SANS, thread mc
Military Standard of the People's Republic of China-General Armament Department, thread mc
PK-PSQCA, thread mc
SAE - SAE International, thread mc
NL-NEN, thread mc
- NEN-ISO 6410-2:1994 Technical drawings.Screw threads and threaded parts.Part 2:Screw thread inserts
Society of Automotive Engineers (SAE), thread mc
- SAE RS-428-5-1955 RS428 Tapped Holes for Wire Thread Inserts, (B.A. B.S.F. B.S.W. Threads) – Unplated
- SAE RS-429-4-1955 RS429 Tapped Holes for Wire Thread Inserts, (BSPF. Threads)-Unplated
- SAE AS4861-2002 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
- SAE RS-430-5-1969 RS430 Tapped Holes for Wire Thread Inserts, (Unified Threads)-Unplated
- SAE ARP368C-1972 Spark Plug Thread Form Data (60 Degrees Thread Angle)
- SAE AS1370-1976 Screw Threads, Controllroot Radius (J Threads) - Metric Series
- SAE AS1171A-2012 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
- SAE AS1171-1970 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
- SAE AS1171B-2022 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
- SAE J81-1997 Thread Rolling Screws
- SAE AMS7473F-1991 Bolts and Screws Roll Threaded
- SAE ARP368C-1992 SPARK PLUG THREAD FORM DATA (60° THREAD ANGLE)
- SAE AS4861A-2013 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
- SAE AS4861B-2016 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
- SAE AS7473-1991 BOLTS AND SCREWS Roll Threaded
- SAE AMS7473B-1960 BOLTS AND SCREWS, ROLL THREADED
- SAE AMS7473D-1979 BOLTS AND SCREWS Roll Threaded
- SAE AS3062C-1979 Bolts, Screws and Studs, Screw Thread Requirements
- SAE AS3062C-1988 Bolts, Screws and Studs - Screw Thread Requirements
- SAE AS3062C-2018 Bolts, Screws and Studs, Screw Thread Requirements
- SAE AS3062A-1974 BOLTS, SCREWS AND STUDS, SCREW THREAD REQUIREMENTS
- SAE AS3062B-1977 BOLTS, SCREWS AND STUDS, SCREW THREAD REQUIREMENTS
- SAE AS3062-1970 BOLTS, SCREWS AND STUDS, SCREW THREAD REQUIREMENTS
- SAE MA3288-1985 NUT, PLAIN HEX - UNS S66286, MJ THREAD, METRIC
- SAE MA3288-2012 NUT, PLAIN HEX – UNS S66286, MJ THREAD, METRIC
- SAE AS896-1976 NIPPLE, FLARELESS TUBE TO MALE PIPE
- SAE AS4855A-2013 FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD
- SAE AS4854A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
KP-CSK, thread mc
- KPS 102-2-2002 Technical drawings-Screw threads and threaded parts-Part 2:Screw thread inserts
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thread mc
- GB/T 42851-2023 1517MPaMJ threaded bolts
- GB/T 42850-2023 1275MPaMJ threaded bolts
- GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
- GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
- GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
- GB/T 5280-2002 Tapping screws thread
- GB/T 14791-1993 The terms of screw threads
AR-IRAM, thread mc
International Organization for Standardization (ISO), thread mc
- ISO 15480:2019 Hexagon washer head drilling screws with tapping screw thread
- ISO 1478:1983 Tapping screws thread
- ISO 1478:1999 Tapping screws thread
- ISO 4570-2:1979 Tyre valve threads; Part 2 : Threads 9V1, 10V2, 12V1, 13V1
- ISO 4570-3:1980 Tyre valve threads; Part 3 : Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
- ISO 5408:2009 Screw threads - Vocabulary
- ISO/R 1501:1970 ISO miniature screw threads
VN-TCVN, thread mc
European Committee for Standardization (CEN), thread mc
TH-TISI, thread mc
American National Standards Institute (ANSI), thread mc
Professional Standard - Aerospace, thread mc
- QJ 2090-1991 MJ threaded fasteners 1100MPa/235°C pan head short threaded bolts
- QJ 2085-1991 MJ threaded fasteners 1100MPa/235°C countersunk head short thread bolts
- QJ 1977-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head short thread bolts
- QJ 1319.1-1987 Ordinary thread gauge thread ring gauge (d=1~100mm)
- QJ 2760.2-1995 MJ Thread Ring Gauge Double Handle MJ Thread Ring Gauge
- QJ 2760.1-1995 MJ Thread Ring Gauge Shankless MJ Thread Ring Gauge
- QJ 2759.1-1995 MJ Thread Plug Gauge Integral MJ Thread Plug Gauge
- QJ 2091-1991 MJ threaded fasteners 1100MPa/235°C pan head close tolerance short thread bolts
- QJ 2086-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance short thread bolts
AIA/NAS - Aerospace Industries Association of America Inc., thread mc
- NAS258-1947 Elbow - 90 Degree@ Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev 2)
- NAM51417-1999 Bolt@ Machine@ Hex Head@ Fully Threaded@ Fine Thread@ Metric
- NAS9603-9624-1996 Bolt@ Hexagon Head@ A286 CRES Close Tolerance@ Minimum Major@ Long Threads
BR-ABNT, thread mc
TR-TSE, thread mc
IFI/FASTNR - Industrial Fastener Institute, thread mc
- PROJEC- Projection Weld Studs (Threaded)
- SECT A- Section A - Screw Threads
KR-KS, thread mc
United States Navy, thread mc
Professional Standard - Automobile, thread mc
GOSTR, thread mc
- GOST R 59110-2020 Motor vehicles. Fasteners. Thread run-outs and thread undercuts for ISO metric threads
Lithuanian Standards Office , thread mc
- LST EN ISO 6410-2:2001 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)
Aerospace Industries Association, thread mc
- AIA NAS 258-1947 (Inactive)Elbow - 90 Degree, Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev. 2)
ES-AENOR, thread mc
AENOR, thread mc
- UNE-EN ISO 6410-2:1996 TECHNICAL DRAWINGS. SCRES THREADS AND THREADED PARTS. PART 2: SCREW THREAD INSERTS. (ISO 6410-2:1993).
- UNE 17077:1980 SCREWS, BOLTS AND STUDS. THREAD RUN OUT.
PL-PKN, thread mc
IN-BIS, thread mc
国家市场监督管理总局、中国国家标准化管理委员会, thread mc
- GB/T 39641-2020 Methods for gaging fastening screw threads by thread indicating gages
Aerospace Industries Association/ANSI Aerospace Standards, thread mc
- AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1
Indonesia Standards, thread mc
Professional Standard - Electron, thread mc
GM North America, thread mc
Professional Standard - Tobacco, thread mc