ZH
RU
ES

Anaerobic section

Anaerobic section, Total:500 items.

In the international standard classification, Anaerobic section involves: Environmental protection, Microbiology, Adhesives, Wastes, Protection against dangerous goods, Laboratory medicine, Plastics, Vocabularies, Structure and structure elements, Water quality, Food products in general, Medical sciences and health care facilities in general, Veterinary medicine, Aircraft and space vehicles in general, Milk and milk products, Fertilizers, Soil quality. Pedology, Farming and forestry, Farm buildings, structures and installations, Cereals, pulses and derived products, Tea. Coffee. Cocoa, Sugar. Sugar products. Starch, Chocolate, Fasteners, Safety of machinery, Analytical chemistry, Animal feeding stuffs, Materials for aerospace construction, Air quality, Rotating machinery, Earth-moving machinery, Physical planning. Town planning, Meat, meat products and other animal produce, Electrical wires and cables, Agricultural machines, implements and equipment.

General Motors Corporation (GM), Anaerobic section

GM 9985552-1998 Sealer, Anaerobic Revision B
GM 9985408-1989 Sealing Compound, Anaerobic
GM 9985361-1989 Sealer, Anaerobic, Grade 361
GM 9985315-1989 SEALER, ANAEROBIC, GRADE 315
GM 9985463-1997 Resin, Impregnation, Anaerobic Revision B
GM 9985299-1990 Retaining Compound, Anaerobic, Grade 299 Revision C
GM 9985352-1989 Compound-Sealant, Anaerobic, Grade 352
GM 9985436-1989 Adhesive Sealant, Anaerobic, Grade 436
GM 9985729-1989 Compound Retaining Anaerobic, High Strength
GM 9985768-1989 Retaining Compound - Anaerobic, High Temperature
GM 9985226-1989 Compound - Retaining, Anaerobic, Grade 226
GM 9985460-1989 Sealer - Anerobic Gasket
GM 9985253-1989 Sealant Compound, Pipe, Anaerobic, Grade 253
GM 9985892-1993 Adhesive, Anaerobic, Adhesive/Sealant
GM 9985148-1989 Compound, Adhesive/ Sealant, Anaerobic, Grade 148
GM 9985409-1999 Sealant Compound, Cup Plug, Anaerobic, Grade 409 Revision C
GM 9985261-1989 Sealant Compound, Adhesive, Anaerobic, Grade 261
GM 9985266-1989 Sealant Compound, Adhesive, Anaerobic, Grade 266
GM 9985283-1989 Sealant Compound, Adhesive, Anaerobic, Grade 283
GM 9985300-1989 Adhesive/Sealant Compound, Anaerobic, Grade 300
GM 9985345-1989 Sealant Compound, Anaerobic, Grade 345, Cup Plug
GM 9985427-1989 Low Odor, Grade 427 Pipe Sealant Compound, Anaerobic, Low Ordor, Grade 427
GM 9985306-1989 Adhesive/Sealant Compound, Anaerobic, Grade 306 [Replaced: HOLDEN HN 1913]

GM North America, Anaerobic section

GM 9985373-1989 PRIMER, ANAEROBIC
GM 9985373-2008 Primer, Anaerobic (Revision C)
GM 9985536-1989 Adhesive Sealant, Anaerobic, Grade 536
GM 9985463-2015 Resin, Impregnation, Anaerobic (Issue 4)
GM 9985259-2002 Compound Adhesive Sealant, Anaerobic, Grade 259
GM GM6013M-1989 Anaerobic Retaining and Sealing Compounds
GM 9985128-1974 Compound Retaining, Anaerobic, Grade 15-10
GM 9985195-2002 Compound Retaining, Anaerobic, Grade 4-1
GM 9985385-1989 COMPOUND, PIPE SEALANT, ANAEROBIC, GRADE 385
GM 9985773-1994 Compound - Adhesive/Sealant, Anaerobic
GM 9985271-2002 Compound Pipe Sealant, Anaerobic, Grade 271 Replaced by GM6013M
GM 9985262-1998 Sealant Compound, Adhesive, Anaerobic, Grade 262 Replaced by GM9986134
GM6013M-2011 Requirements for Liquid Anaerobic Compounds Issue 8; Do Not Use on New Programs; No Replacement
GM GM6013M-2012 Requirements for Liquid Anaerobic Compounds (Issue 9; Do Not Use on New Programs; Replaced by GMW16800)

International Federation of Trucks and Engines, Anaerobic section

NAVISTAR TMS 7057-2009 Anaerobic Compounds

IN-BIS, Anaerobic section

IS 8501-1977

工业和信息化部, Anaerobic section

HG/T 3737-2018 Anaerobic adhesives

GM Holden Ltd, Anaerobic section

HOLDEN HN 1823-2004 SEALER - ANEROBIC
HOLDEN HN 1584-2000 Sealant - Anerobic with Teflon
HOLDEN HN 1774-2000 Hydraulic Sealant - Anerobic
HOLDEN HN 1593-1985 Sealer - Anaerobic Type - High Temperature Resistant

Group Standards of the People's Republic of China, Anaerobic section

T/CBFIA 14001-2017 Anaerobic granular sludge
T/CIECCPA 043-2023 Technical Specification for Anaerobic Carbon Conversion and Utilization of Sludge
T/CIET 142-2023 Equipment requirements for anaerobic fermentation disposal and utilization of food waste
T/CI 045-2022 Technical code for unpowered self—stirring anaerobic fermentation device
T/CAQI 60-2018 Biological treatment for sewage and wastewater High-loading internal circulation anaerobic reactor
T/ZZB 1058-2019 Unpowered anaerobic biofilter method catering sewage device
T/SDFA 002.8-2021 Fermented Feed Raw Materials Part 8: Technical Specifications for Anaerobic Fermentation
T/JSSES 6-2020 Fine Sorting of Food Waste-Technical Guide for Fully Mixed Anaerobic Digestion Treatment
T/GDAEPI 16-2023 Technical specification for in situ sludge reduction process based on side stream anaerobic treatment
T/CSUS 29-2021 Specifications for advanced anaerobic digestion process design of urban sewage treatment plant sludge
T/CECS 20007-2021 Guidelines for design and operation management of sludge anaerobic digestion process in urban sewage treatment plants

RU-GOST R, Anaerobic section

GOST 10444.3-1985 Canned foods. Method for determination of mesophilic airobes and facultative-anairobes
GOST 10444.5-1985 Canned foods. Method for determination of thermophilic airobes and facultive anairobes
GOST 32633-2014 Test methods for chemicals of environmental hazard. Determination of aerobic and anaerobic transformation in soil
GOST 25102-1990 Milk and milk products. Methods for determination of the spores content of mesophilic anaerobic bacteria
GOST 33536-2015 Confectionery. Method for quantity determination of mesophilic aerobic and facultative-anaerobic microorganisms
GOST 10444.4-1985 Canned foods. Method for determination of nusophilic strictly anaerobs
GOST 10444.6-1985 Canned foods. Method for determination of thermophile strictly anairobes
GOST 10444.15-1994 Food products. Methods for determination quantity of mesophilic aerobes and facultative anaerobes
GOST 10444.15-1975 Canned foods. Methods for microbiological examination. Determination of total bacteria quantity by petri dishes count
GOST 32432-2013 Testing of chemicals of environmental hazard. Aerobic and anaerobic transformation in aquatic sediment systems
GOST R 52415-2005 Fresh cow's milk - raw material. Luminescent method of quantitative determination of the total amount of mesophilic aerobic and elective anaerobic microorganisms
GOST R 54075-2010 Milk and milk product. Methods for determination of the spores content of mesophilic annarobic microorganisms
GOST 30705-2000 Infant milk products. Method for determination of the total amount of mesophilic aerobic and elective anaerobic bacteria
GOST 32012-2012 Milk and milk product. Methods for determination of the spores content of mesophilic anaerobic microorganisms
GOST R 50396.1-2010 Poultry meat, edible offal and ready-to-cook poultry meat. Method for quantity determination of mesophilic aerobic and facultative-anaerobic microorganisms
GOST R 50396.1-1992 Poultry meat, edible offal, ready-to-cook products. Method for quantity determination of mesophilic aerobes and facultative-anaerobes
GOST R ISO 11266-2016 Soil quality. Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
GOST R ISO 15473-2016 Soil quality. Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
GOST 32475-2013 Testing of chemicals of environmental hazard. Anaerobic biodegradability of organic compounds in digested sludge
GOST R 50396.6-1992 Poultry meat, edible offal, ready-to-cook products. Methods for detection and quantity determination of sulfit-reducing anaerobes

Professional Standard - Military and Civilian Products, Anaerobic section

WJ 1857-1989 Anaerobic adhesive technical conditions

European Association of Aerospace Industries, Anaerobic section

AECMA PREN 3796-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Ability of Anaerobic Polymerisable Compounds to Set on Metal Surfaces Edition P1
AECMA PREN 3792-1994 Aerospace Series Anaerobic Polymerisable Compounds Technical Specification Edition P 1
AECMA PREN 3808-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Thixotropic Index 8 Edition P 1
AECMA PREN 3801-1995 Anaerobic Polymerisable Compounds Torque Strength 5 Nm Thixotropic Index 8 Edition P 1
AECMA PREN 3804-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Thixotropic Index 3,5 Edition P 1
AECMA PREN 3805-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Thixotropic Index 8 Edition P 1
AECMA PREN 3809-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Viscosity is Less Than 50 mm2s-1 Edition P 1
AECMA PREN 3810-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Viscosity 125 mm2s-1 Edition P 1
AECMA PREN 3811-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Viscosity 500 mm2s-1 Edition P 1
AECMA PREN 3812-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Thixotropic Index 8 Edition P 1
AECMA PREN 3794-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Torque Strength on Threaded Fasteners Edition P1
AECMA PREN 3795-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Freedom from Excessive Cure Rate Edition P1
AECMA PREN 3806-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Viscosity is Less Than 50 mm2s-1 Edition P 1
AECMA PREN 3807-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Viscosity 500 mm2s-1 Edition P 1
AECMA PREN 3793-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Static Shear Strength Edition P1
AECMA PREN 3798-1995 Anaerobic Polymerisable Compounds Torque Strength 2 Nm Viscosity 500 mm Squared Per Second Edition P 1
AECMA PREN 3797-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 2 Nm Viscosity 125 mm Squared Per Second Edition P 1
AECMA PREN 3800-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 5 Nm Viscosity 500 mm Squared Per Second Edition P 1
AECMA PREN 3802-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Viscosity 125 mm2s-1 Edition P 1
AECMA PREN 3803-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Viscosity 500 mm2s-1 Edition P 1
AECMA PREN 4488-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 2 Nm Edition P 1
AECMA PREN 4489-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 5 Nm Edition P 1
AECMA PREN 4490-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 10 Nm Edition P 1
AECMA PREN 4491-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 16 Nm Edition P1
AECMA PREN 4492-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 19 Nm Edition P 1

Professional Standard - Chemical Industry, Anaerobic section

HG/T 3737-2004 Anaerobic single-component adhesives

Professional Standard - Machinery, Anaerobic section

JB/T 10669-2006 Upflow anaerobic reactor
JB/ZQ 4191-2006 Technical specifications for application of anaerobic adhesive in heavy machinery
JB/T 7311-2001 Construction machinery.Anaerobic adhesive and RTV silicone application.Technical specification
JB/T 7311-2008 Construction machinery. Anaerobic adhesive, silicone and pre-applied dry film adhesive. Application technical specifications

工业和信息化部/国家能源局, Anaerobic section

JB/T 10669-2016 Upflow anaerobic reactor
JB/T 12914-2016 Unpowered anaerobic biological filter method catering industry sewage treatment
JB/T 7311-2016 Technical specifications for the application of anaerobic adhesives, silicone rubber and pre-coated dry film adhesives for engineering machinery

(U.S.) Ford Automotive Standards, Anaerobic section

FORD SD-M4G9107-A-1994 SEALER, ANAEROBIC, HIGH STRENGTH
FORD SQ-M4G9523-A-1994 SEALANT, FLANGE - ANAEROBIC, FOR SCREEN PRINTING
FORD ESK-M4G247-A1-1994 SEALER, LOCKING - ANAEROBIC - MEDIUM STRENGTH - THIXOTROPIC
FORD WSK-M2G348-A1-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G348-A1-2014 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G348-A2-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESW-M2G159-A-2014 PRIMER, ANAEROBIC ADHESIVES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4G210-B-2015 SEALER, ANAEROBIC, VACUUM IMPREGNATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G354-A1-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G360-A-2015 ACTIVATOR, SOLVENT FREE, FOR ANAEROBICS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G348-A10-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING *** TO BE USED WITH FORD WSS - M99P1111 - A*** (Shown on FORD WSK-M2G348-A1)
FORD WSS-M4G370-A-2010 SEALANT, ANAEROBIC, PRE-APPLIED THREADED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4G326-A1-2014 SEALANT, FLANGE, ANAEROBIC, FOR SCREEN PRINTING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SQ-M4G9523-A-2014 FLANGE SEALANT, ANAEROBIC, FOR SCREEN PRINTING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SS-M99B9000-AA-2002 ACTIVATOR FOR ANAEROBIC RETAINING AND SEALING COMPOUNDS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G348-A2-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G348-A4-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G348-A5-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G348-A6-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G348-A7-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G348-A8-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G348-A9-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSS-M2G348-A11-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD ESK-M4G247-A1-2014 SEALER, LOCKING-ANAEROBIC-MEDIUM STRENGTH, THIXOTROPIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G348-A9-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G348-A5-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G348-A8-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSS-M2G348-A10-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSS-M2G348-A11-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G348-A7-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G348-A6-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G348-A4-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G348-A2-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A4-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A5-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A6-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A7-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A8-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A9-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G348-A1-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G349-A3-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A4-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A5-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A7-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A8-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A9-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A10-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A11-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A12-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A13-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A14-2011 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G350-A1-2011 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G350-A2-2011 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G350-A3-2011 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSS-M2G348-A10-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G349-A3-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A4-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A5-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A7-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A8-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A9-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A10-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A11-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A12-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A13-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A14-2013 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G349-A10-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A11-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A9-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A13-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A8-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A12-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A4-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A3-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A7-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G350-A3-2021 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G350-A2-2021 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G349-A5-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G354-A2-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSK-M2G354-A6-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSK-M2G354-A7-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSK-M2G354-A3-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSK-M2G354-A4-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSK-M2G354-A5-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSK-M2G351-A4-2011 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G351-A6-2011 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G351-A7-2011 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G351-A8-2011 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G351-A9-2011 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G351-A10-2011 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSS-M2G349-A14-2021 ADHESIVES, ANAEROBIC, (AN) RETAINING, MEDIUM VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSS-M2G351-A11-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING,MEDIUM STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G351-A4-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G351-A8-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G351-A6-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G351-A7-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G351-A10-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSK-M2G351-A9-2021 ADHESIVES, ANAEROBIC, (AN) THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)

U.S. Military Regulations and Norms, Anaerobic section

ARMY MIL-R-46082 B NOTICE 2-2001 RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC
ARMY MIL-R-46082 B NOTICE 1-1998 RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC
ARMY MIL-R-46082 B (6)-1990 RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC
ARMY MIL-R-46082 B-1983 RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC
ARMY MIL-S-46163 A NOTICE 3-2001 SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT
ARMY MIL-S-46163 A NOTICE 2-1997 SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT
ARMY MIL-S-46163 A INT AMD 3-1995 SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT
ARMY MIL-S-46163 A (2)-1993 SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT
ARMY MIL-S-46163 A VALID NOTICE 1-1991 SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT
ARMY MIL-S-46163 A-1983 SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Anaerobic section

GB/T 27856-2011 Chemicals.Aerobic and anaerobic transformation in soil test
GB/T 27853-2011 Chemicals. Aerobic and anaerobic transformation in aquatic sediment systems test
GB/T 18747.1-2002 The determination of torque strength of anaerobic adhesives (Threaded fasteners)
GB/T 18747.1-2002 Determination of Torque Strength of Anaerobic Adhesives (Threaded Fasteners)
GB/T 18747.2-2002 The determination of shear strength of anaerobic adhesives using pin--and--collar specimens
GB/T 2951.25-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for anaerobe-corrosion of protective coverings
GB/T 27857-2011 Chemicals. Anaerobic biodegradability of organic compounds in digested sludge. By measurement of gas production

Professional Standard - Medicine, Anaerobic section

YY/T 1167-2009 Anaerobic blood agar medium base

Professional Standard - Aviation, Anaerobic section

HB 6769-1993 One-component thread locking anaerobic adhesive
HB 6770-1993 One-component cylinder-mounted anaerobic adhesive
HB 5323-1993 Test method for viscosity of anaerobic adhesives used in aviation
HB 5326-1993 Test method for corrosion of anaerobic adhesives used in aviation
HB 5327-1993 Test method for lubricity of anaerobic adhesives used in aviation
HB 5328-1993 Test method for solubility of anaerobic adhesives used in aviation
HB 5316-1993 Test method for permeability of anaerobic adhesives used in aviation
HB 5317-1993 Test method for lubricity of anaerobic adhesives used in aviation
HB 5318-1993 Test method for thermal strength of anaerobic adhesives used in aviation
HB 5319-1993 Test method for thermal aging of anaerobic adhesives for aviation
HB 5325-1993 Test method for curing speed of anaerobic adhesives used in aviation
HB 5322-1993 Test method for media resistance of anaerobic adhesives used in aviation
HB 5315-1993 Test method for tightening torque of anaerobic adhesives used in aviation
HB 5320-1993 Test method for hygrothermal aging of anaerobic adhesives for aviation
HB 5321-1993 Test method for low temperature strength of anaerobic adhesives for aviation
HB 5324-1993 Test method for ultraviolet fluorescence of anaerobic adhesives used in aviation
HB 5329-1993 Test method for storage stability of anaerobic adhesives used in aviation
HB 5313-1993 Test method for liquid tightness of anaerobic adhesives used in aviation
HB 5314-1993 Test method for static shear strength of anaerobic adhesives used in aviation

Military Standards (MIL-STD), Anaerobic section

DOD A-A-53433-1988 INDEX, ANALYTICAL PROFILE, ANAEROBE IDENTIFICATION
DOD A-A-51237 A-1989 BACTERIOLOGICAL SPECIMEN COLLECTION AND TRANSPORTATION SYSTEM (ANAEROBIC BACTERIA, COLLECTING AND TRANSPORTING)

Association Francaise de Normalisation, Anaerobic section

NF V59-106:1982 Edible gelatine. Enumeration of sulfito-reducing anaerobic micro-organism spores. Anaerobic colony count technique at 37 degrees C.
NF EN ISO 15985:2017 Plastiques - Évaluation de la biodégradation anaérobie ultime dans des conditions de digestion anaérobie à teneur élevée en solides - Méthode par analyse du biogaz libéré
NF T51-812*NF EN ISO 15985:2017 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
XP U45-013*XP CEN/TS 17719:2022 Plant biostimulants - Determination of the anaerobic plate count
NF T76-124*NF EN 15865:2009 Adhesives - Determination of torque strength of anaerobic on threaded fasteners
XP CEN/TS 17719:2022 Biostimulants des végétaux - Détermination du dénombrement sur plaque des germes anaérobies
NF EN 3792:2022 Série aérospatiale - Composés polymérisables anaérobies - Spécification technique
NF B35-205:1955 Glass. Glassware for bacteriological use. Constricted tubes for anaerobic cultures.
NF EN 49-1:2016 Produits de préservation du bois - Détermination de l'efficacité protectrice vis-à-vis de Anobium punctatum (De Geer) par l'observation de la ponte et du taux de survie des larves - Partie 1 : application par traitement de surface (Méthode de la...
NF T76-335:2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens.
NF T76-124:1997 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners.
NF T76-335*NF EN ISO 10123:2019 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
NF EN ISO 10123:2019 Adhésifs - Détermination de la résistance au cisaillement des adhésifs anaérobies sur assemblage type axe-bague
NF L17-023*NF EN 4491:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
NF EN 15865:2009 Adhésifs - Détermination des couples fonctionnels sur des fixations filetées collées avec des adhésifs anaérobies
NF EN 4488:2013 Série aérospatiale - Matériaux non-métalliques - Composé polymérisable anaérobie - Agent de freinage - Résistance au couple de torsion 2 Nm
NF EN 4491:2013 Série aérospatiale - Matériaux non-métalliques - Composé polymérisable anaérobie - Agent de freinage - Résistance au couple de torsion 16 Nm
NF EN 4492:2013 Série aérospatiale - Matériaux non-métalliques - Composé polymérisable anaérobie - Agent de freinage - Résistance au couple de torsion 19 Nm
NF L17-021*NF EN 4492:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm
NF L17-019*NF EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm
NF EN ISO 15473:2020 Qualité du sol - Lignes directrices relatives aux essais en laboratoire pour la biodégradation de produits chimiques organiques dans le sol sous conditions anaérobies
NF ISO 19388:2023 Valorisation, recyclage, traitement et élimination des boues - Exigences et recommandations pour l'exploitation des installations de digestion anaérobie
NF EN 15275:2015 Adhésifs structuraux - Caractérisation des adhésifs anaérobies pour assemblages métalliques coaxiaux dans les bâtiments et ouvrages de génie civil

British Standards Institution (BSI), Anaerobic section

BS 5350-G2:1987 Methods of test for adhesives - Tests on anaerobic adhesives - Determination of static shear strength of anaerobic adhesives
BS EN ISO 15985:2017 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
BS ISO 15985:2014 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
BS ISO 15985:2004 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
PD CEN/TS 17719:2022 Plant biostimulants. Determination of the anaerobic plate count
BS EN 3792:2022 Aerospace series. Anaerobic polymerisable compounds. Technical specification
BS EN 15337:2007 Adhesives - Determination of shear of anaerobic adhesives using pin-and-collar specimens
23/30463114 DC BS EN 17719. Plant biostimulants. Determination of the anaerobic plate count
BS EN ISO 10123:2019 Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
BS EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners
BS 5350-G3:1987 Methods of test for adhesives - Determination of ability of anaerobic adhesives to set on metal surfaces
BS EN 26461-2:1993 Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by membrane filtration
21/30436749 DC BS ISO 19388. Sludge recovery, recycling, treatment and disposal. Guidelines for the operation of anaerobic digestion facilities
BS ISO 19388:2023 Sludge recovery, recycling, treatment and disposal. Requirements and recommendations for the operation of anaerobic digestion facilities
BS EN ISO 15473:2020 Soil quality. Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
BS EN 4491:2013 Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 16 N
BS EN 4492:2013 Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 19 N
BS EN 15275:2007 Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

未注明发布机构, Anaerobic section

BS EN ISO 15985:2017(2018) Plastics – Determination of the ultimate anaerobic biodegradation under high - solids anaerobic - digestion conditions – Method by analysis of released biogas
BS EN ISO 10964:1997(1999) Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners
BS EN ISO 14853:2017(2018) Plastics – Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system – Method by measurement of biogas production

American Society for Testing and Materials (ASTM), Anaerobic section

ASTM D5363-03(2008) Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5363-16 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D5363-03 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D5363-03e1 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D5363-97 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM F1179-88(1997) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ASTM E1535-93(1998) Standard Test Method for Performance Evaluation of Anaerobic Digestion Systems
ASTM E1535-93(2006) Standard Test Method for Performance Evaluation of Anaerobic Digestion Systems
ASTM F1179-88(2002) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ASTM F1179-88(2007) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ASTM D7475-20 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
ASTM F1834-98 Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land
ASTM D5210-92 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
ASTM F1834-98(2004) Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land
ASTM D5526-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D5526-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM F1179-88(2014) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ASTM D7475-11 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
ASTM E2170-01 Standard Test Method for Determining Anaerobic Biodegradation Potential of Organic Chemicals Under Methanogenic Conditions
ASTM D5526-94(2002) Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D5526-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM D5526-94(2011)e1 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
ASTM E2170-01(2008) Standard Test Method for Determining Anaerobic Biodegradation Potential of Organic Chemicals Under Methanogenic Conditions

Professional Standard - Urban Construction, Anaerobic section

CJ/T 517-2017 Domestic waste leachate anaerobic reactor
CJ/T 149-2001 Urban water supply-Determination of the spores of sulfite-reducing anaerobes(clostridia)

CZ-CSN, Anaerobic section

CSN 56 0083-1986 Kood products numeration of mesophilic aerobic nd facultatively anaerobic icroorganisms - plate count echnique
CSN 57 0161-1984 Canned foods. Method of enumeration of mesophilic aerobic and facultatively anaerobic microorganisms
CSN 57 0163-1984 Canned foods. Method of enumeration of thermophilic aerobic and facultatively anaerobic microorganisms
CSN 57 0164-1984 Canned foods. Method of enumeration of thermophilic anaerobic microorganisms
CSN 57 0162-1984 Canned foods. Method of enumeration of mesophilic anaerobic microorganisms
CSN 56 0084-1986 Food products. Enumeration of mesophilic aerobic and facultatively anaerobic microorganisms by cultivation in liquid soils

Japanese Industrial Standards Committee (JISC), Anaerobic section

JIS K 6960:2008 Plastics -- Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas

ES-UNE, Anaerobic section

UNE-EN ISO 15985:2018 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
UNE-EN 3792:2022 Aerospace series - Anaerobic polymerisable compounds - Technical specification (Endorsed by Asociación Española de Normalización in June of 2022.)
UNE-CEN/TS 17719:2022 Plant biostimulants - Determination of the anaerobic plate count (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN ISO 10123:2020 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
UNE-EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm (Endorsed by AENOR in March of 2013.)
UNE-EN 4491:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm (Endorsed by AENOR in March of 2013.)
UNE-EN ISO 15473:2020 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions (ISO 15473:2002) (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN 4492:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm (Endorsed by AENOR in March of 2013.)
UNE-EN ISO 14853:2018 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016)

German Institute for Standardization, Anaerobic section

DIN EN ISO 15985:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014); German version EN ISO 15985:2017
DIN EN ISO 15985:2018 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
DIN 58959-15 Bb.1:1997 Quality management in medical microbiology - Part 15: Requirements for the use of control strains for susceptibility testing of anaerobic bacteria; MIC/IZD limits for anaerobes
DIN EN 3792:2019 Aerospace series - Anaerobic polymerisable compounds - Technical specification; German and English version FprEN 3792:2019
DIN EN 3792:2022-08 Aerospace series - Anaerobic polymerisable compounds - Technical specification; German and English version EN 3792:2022
DIN EN 17719:2023-05 Plant biostimulants - Determination of the anaerobic plate count; German and English version prEN 17719:2023 / Note: Date of issue 2023-04-21*Intended as replacement for DIN CEN/TS 17719 (2022-07).
DIN CEN/TS 17719:2022-07 Plant biostimulants - Determination of the anaerobic plate count; German version CEN/TS 17719:2022
DIN EN 15337:2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990, modified); English version of DIN EN 15337:2007-11
DIN EN ISO 10123:2019-10 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013); German version EN ISO 10123:2019
DIN EN 15865:2009-08 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified); German version EN 15865:2009
DIN EN ISO 10123:2019 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
DIN EN ISO 11734:1998 Water quality - Evaluation of the "ultimate" anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995); German version EN ISO 11734:1998
DIN ISO 15473:2002 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions (ISO 15473:2002)
DIN EN 17719:2023 Plant biostimulants - Determination of the anaerobic plate count; German and English version prEN 17719:2023
DIN EN 15275:2008 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures; English version of DIN EN 15275:2008-01
DIN EN 4488:2013-04 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm; German and English version EN 4488:2013
DIN EN 4491:2013-05 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm; German and English version EN 4491:2013
DIN EN 4492:2013-05 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm; German and English version of EN 4492:2013
DIN EN ISO 15473:2021-02 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions (ISO 15473:2002); German version EN ISO 15473:2020
DIN EN ISO 14853:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016); German version EN ISO 14853:2017

Professional Standard - Environmental Protection, Anaerobic section

HJ 576-2010 Technical specifications for Anaerobic-Anoxic-Oxic activated sludge process
HJ 2024-2012 Technical specifications for completely mixed anaerobic reaction tank in wastewater treatment
HJ 2013-2012 Technical specifications of up-flow anaerobic sludge blanket（UASB）reactor for wastewater treatment
HJ 2023-2012 Technical specifications of expanded granular sludge bed (EGSB) reactor for wastewater treatment

American National Standards Institute （ANSI), Anaerobic section

ANSI/NCCLS M11-A 3-1996 Antimicrobial Susceptibility Testing of Anaerobic Bacteria, Methods for
ANSI/ASAE EP403.4-2011 Design of Anaerobic Lagoons for Animal Waste Management
ANSI/ASTM F1179:1997 Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ANSI/ASTM D5210:1992 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03)

Korean Agency for Technology and Standards (KATS), Anaerobic section

KS I ISO 13641-2014(2019) Water quality — Determination of inhibition of gas production of anaerobic bacteria
KS T ISO 15985:2012 Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis released biogas
KS I ISO 13641:2014 Water quality — Determination of inhibition of gas production of anaerobic bacteria
KS T ISO 15985-2012(2017) Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis released biogas
KS T ISO 15985-2012(2022) Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis released biogas
KS B 6400-2013 Performance evaluation method for anaerobic compost facilities of organic wastes
KS B 6400-2003(2008) Performance evaluation method for anaerobic compost facilities of organic wastes
KS B 6400-2003 Performance evaluation method for anaerobic compost facilities of organic wastes
KS I ISO 13641-1-2008(2013) Water quality－Determination of inhibition of gas production of anaerobic bacteria－Part 1：General test
KS M ISO 10964-2010(2020) Adhesives－Determination of torque strength of anaerobic adhesives on threaded fasteners
KS I ISO 6461-2014(2021) Water quality — Detection and enumeration of the spores of sulfite-reducing anaerobes(clostridia)
KS M ISO 10964:2010 Adhesives-Determination of torque strength of anaerobic adhesives on threaded fasteners
KS T ISO 14853:2012 Plastics ― Determination of the ultimate anaerobic biodegradability in an aqueous system ― Method by measurement of biogas
KS I ISO 6461:2014 Water quality — Detection and enumeration of the spores of sulfite-reducing anaerobes(clostridia)
KS T ISO 14853-2012(2022) Plastics ― Determination of the ultimate anaerobic biodegradability in an aqueous system ― Method by measurement of biogas
KS I ISO 15473:2009 Soil quality-Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions

European Committee for Standardization (CEN), Anaerobic section

EN ISO 15985:2017 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
FprCEN/TS 17719-2021 Plant biostimulants - Determination of the anaerobic plate count
EN 4491:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
EN 4492:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm
EN 15337:2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990, modified)
EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm
EN ISO 10964:1997 Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners ISO 10964: 1993
CWA 17484:2020 Anaerobic digestion plants - Feasibility assessment methodology for integrating a Volatile Fatty Acid Platform Technology
EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
EN 26461-2:1993 Water Quality - Detection and Enumeration of the Spores of Sulfite- Reducing Anaerobes (Clostridia) - Part 2: Method by Membrane Filtration (ISO 6461/2: 1986)
EN 15275:2007 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
EN 26461-1:1993 Water Quality - Detection and Enumeration of the Spores of Sulfite- Reducing Anaerobes (Clostridia) - Part 1: Method by Enrichment in a Liquid Medium (ISO 6461-1: 1986)
EN ISO 15473:2020 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions (ISO 15473:2002)

International Organization for Standardization (ISO), Anaerobic section

ISO 15985:2014 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
ISO 15985:2004 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
ISO 15985:2004/Cor 1:2007 Plastiques - ?valuation de la biodégradation anaérobie ultime et de la désintégration dans des conditions de digestion anaérobie à teneur élevée en solides - Méthode par analyse du biogaz libéré RECTIFICATIF TECHNIQUE 1
ISO 10123:2013 Adhesives.Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
ISO 10123:1990 Adhesives; determination of shear strength of anaerobic adhesives using pin-and-collar specimens
ISO 10964:1993 Adhesives; determination of torque strength of anaerobic adhesives on threaded fasteners
ISO 19388:2023 Sludge recovery, recycling, treatment and disposal — Requirements and recommendations for the operation of anaerobic digestion facilities
ISO 15473:2002 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions

Gansu Provincial Standard of the People's Republic of China, Anaerobic section

DB62/T 4116-2020 Technical specification for anaerobic digestion of food waste

Professional Standard - Hygiene , Anaerobic section

WS/T 248-2005 Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria

Guangxi Provincial Standard of the People's Republic of China, Anaerobic section

DB45/T 1690-2018 Technical specifications for treating sick and dead pigs by anaerobic fermentation tank method

Professional Standard - Automobile, Anaerobic section

QC/T 597-1999 Threaded fastener pre-coated microcapsule anaerobic dry film adhesive

Jiangsu Provincial Standard of the People's Republic of China, Anaerobic section

DB3210/T 1019-2018 Technical regulations for strong anaerobic remediation of strawberry soil in facilities
DB32/T 1871-2011 Technical regulations for anaerobic fermentation and biogas slurry return of water hyacinth

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Anaerobic section

PREN 3796-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Ability of Anaerobic Polymerisable Compounds to Set on Metal Surfaces (Edition P1)
PREN 3792-1994 Aerospace Series Anaerobic Polymerisable Compounds Technical Specification (Edition P 1)
PREN 3801-1995 Anaerobic Polymerisable Compounds Torque Strength 5 Nm Thixotropic Index 8 (Edition P 1)
PREN 3798-1995 Anaerobic Polymerisable Compounds Torque Strength 2 Nm Viscosity 500 mm Squared Per Second (Edition P 1)
PREN 3805-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Thixotropic Index 8 (Edition P 1)
PREN 3807-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Viscosity 500 mm2s-1 (Edition P 1)
PREN 3808-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Thixotropic Index 8 (Edition P 1)
PREN 3812-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Thixotropic Index 8 (Edition P 1)
PREN 3810-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Viscosity 125 mm2s-1 (Edition P 1)
PREN 3809-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Viscosity is Less Than 50 mm2s-1 (Edition P 1)
PREN 3806-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Viscosity is Less Than 50 mm2s-1 (Edition P 1)
PREN 3802-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Viscosity 125 mm2s-1 (Edition P 1)
PREN 3811-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 19 Nm Viscosity 500 mm2s-1 (Edition P 1)
PREN 3803-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Viscosity 500 mm2s-1 (Edition P 1)
PREN 3793-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Static Shear Strength (Edition P1)
PREN 3799-1995 Aerospace series - Anaerobic polymerisable compounds - Torgue strength 5 Nm Viscosity 125 mm 2s-1 (Edition P 1)
PREN 3804-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Thixotropic Index 3@5 (Edition P 1)
PREN 3795-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Freedom from Excessive Cure Rate (Edition P1)

US-CLSI, Anaerobic section

CLSI M11-A8-2012 Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard - Eighth Edition
CLSI M11-2018 Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard - Eighth Edition

RO-ASRO, Anaerobic section

STAS 6349/5-1980 MILK AND MILK PRODUCTS Determination of the content of spored anaerobe bacteries
STAS SR 11499-5-1999 Sugar - Determination of Hydrogen-sulphide-producing termophile sporulated anaerobic bacteria contamination
STAS 12922/4-1991 Fish and fish products. Total number determination of aerobic mesophilic and optional anaerobic germs at 30C
STAS SR 12922-7-1995 Fish and fish products. Determination of sulfite-reducing anaerobes (Clostridia)

AT-ON, Anaerobic section

ONR CEN/TS 17719-2021 Plant biostimulants - Determination of the anaerobic plate count

Heilongjiang Provincial Standard of the People's Republic of China, Anaerobic section

DB23/T 2008-2017 Technical specifications for anaerobic wet biogas production of domestic waste in villages and towns

Zhejiang Provincial Standard of the People's Republic of China, Anaerobic section

DB33/T 2314-2021 Technical specifications for anaerobic biogas generation of rural perishable garbage

Fujian Provincial Standard of the People's Republic of China, Anaerobic section

DB35/T 1257-2012 Technical specifications for anaerobic fermentation biogas engineering of red mud plastic

农业农村部, Anaerobic section

NY/T 3612-2020 Engineering design specifications for sequential batch anaerobic dry fermentation digesters

保定市市场监督管理局, Anaerobic section

DB1306/T 178-2021 Technical regulations for anaerobic fertilizer and water application in winter wheat dairy farms

SE-SIS, Anaerobic section

SIS SS 02 81 71-1985 Heterotrophic aerobic and facultative anaerobic bacteria in water — Enumeration with pour plate technique

Shandong Provincial Standard of the People's Republic of China, Anaerobic section

DB37/T 3117-2018 Technical regulations for producing biogas by anaerobic fermentation of waste from livestock and poultry farms

Sichuan Provincial Standard of the People's Republic of China, Anaerobic section

DB51/T 2524-2018 Technical specification for biogas pretreatment by anaerobic digestion of straw raw materials

Xinjiang Provincial Standard of the People's Republic of China, Anaerobic section

DB65/T 4649-2023 Technical specifications for anaerobic fermentation treatment of manure in large-scale farms

HU-MSZT, Anaerobic section

MSZ 3743/2-1982

Aerospace, Security and Defence Industries Association of Europe (ASD), Anaerobic section

ASD-STAN PREN 3796-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Ability of Anaerobic Polymerisable Compounds to Set on Metal Surfaces (Edition P1)
ASD-STAN PREN 3792-1994 Aerospace Series Anaerobic Polymerisable Compounds Technical Specification (Edition P 1)
ASD-STAN PREN 3801-1995 Anaerobic Polymerisable Compounds Torque Strength 5 Nm Thixotropic Index 8 (Edition P 1)
ASD-STAN PREN 3797-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 2 Nm Viscosity 125 mm Squared Per Second (Edition P 1)
ASD-STAN PREN 3798-1995 Anaerobic Polymerisable Compounds Torque Strength 2 Nm Viscosity 500 mm Squared Per Second (Edition P 1)
ASD-STAN PREN 3800-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 5 Nm Viscosity 500 mm Squared Per Second (Edition P 1)
ASD-STAN PREN 3802-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Viscosity 125 mm2s-1 (Edition P 1)
ASD-STAN PREN 3803-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 10 Nm Viscosity 500 mm2s-1 (Edition P 1)
ASD-STAN PREN 3806-1995 Aerospace Series Anaerobic Polymerisable Compounds Torque Strength 16 Nm Viscosity is Less Than 50 mm2s-1 (Edition P 1)

GOSTR, Anaerobic section

GOST 7702.2.1-1995 Poultry meat, edible offal, ready-to-cook products. Method for quantity determination of mesophilic aerobes and facultative-anaerobes
GOST 7702.2.1-2017 Poultry slaughtering products, poultry meat products and environment production objects. The method of identification of mesophilic aerobic and facultative anaerobic microorganisms
GOST R 59091-2020 Motor vehigles. Fasteners. Determination of resistance to torque of anaerobic adhesives on threaded fasteners

CEN - European Committee for Standardization, Anaerobic section

EN ISO 10123:2019 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens

中华人民共和国环境保护部, Anaerobic section

(HJ 2024-2012) Technical specifications for completely mixed anaerobic reaction tank in wastewater treatment
(HJ 2023-2012) Technical specifications of expanded granular sludge bed（EGSB）reactor for wastewater treatment

Danish Standards Foundation, Anaerobic section

DS/ISO 13641-1:2004 Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 1: General test
DS/EN 15337:2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
DS/EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners
DS/ISO 13641-2:2004 Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test for low biomass concentrations
DS/EN 4491:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
DS/EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm
DS/EN 4492:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm

Association of German Mechanical Engineers, Anaerobic section

VDI 3475 Blatt 5-2015 Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment
VDI 3475 Blatt 2-2005 Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a

国家能源局, Anaerobic section

NB/T 10403-2020 Operation and management specifications for large and medium-sized medium-temperature anaerobic fermentation and power generation units

Professional Standard - Commodity Inspection, Anaerobic section

SN 0178-1992 Counts of thermophilic bacterialspores（total aerobic,flat-sour andanaerobic） in food for export
SN/T 0178-2011 Enumeration of othermophilic bacterial spores(total aerobic,flat-sour and anaerobic) in food for import and export
SN/T 1071-2014 Method for the determination of anaerobic sulfite-reducing clostridia in food for export
SN/T 1071-2002 Method for the determination of anaerobic sulfite-reducing clostridia in food for import and export

General Motors do Brasil, Anaerobic section

GMSA EMS 9309550-2011 Thixotropic anaerobic sealing compound Vedador anaer贸bico tixotr贸pico Do Not use on New Programs; No Replacement
GMSA EMS 9309548-2011 Anaerobic sealant compound Composto selador anaer贸bico Do Not use on New Programs; No Replacement
GMSA EMS 9309546-2011 Anaerobic sealing compound Vedador anaer贸bico Do Not use on New Programs; No Replacement

KR-KS, Anaerobic section

KS I ISO 6461-2014 Water quality — Detection and enumeration of the spores of sulfite-reducing anaerobes(clostridia)
KS I ISO 13641-2-2010 Water quality－Determination of inhibition of gas production of anaerobic bacteria－Part 2：Test for low biomass concentrations

Yunnan Provincial Standard of the People's Republic of China, Anaerobic section

DB5329/T 78.3-2021 Comprehensive Utilization of Kitchen Waste in the Erhai Lake Basin Part 3 Technical Requirements for Anaerobic Fermentation
DB5329/T 78.1-2021 Construction and management of anaerobic fermentation disposal plant for comprehensive utilization of kitchen waste in Erhai Lake Basin Part 1

GM Global, Anaerobic section

GMW 16800-2012 Requirements for Liquid Anaerobic Compounds Used for Thread Locking, Retaining and Sealing Issue 1; English

Canadian Standards Association (CSA), Anaerobic section

CSA Z218.0-93-1993 Test Method for Determining the Anaerobic Biodegradability of Plastic Materials General Instruction No 1 R(1999)

Lithuanian Standards Office , Anaerobic section

LST EN 15337-2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified)
LST EN 15865-2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
LST EN 15275-2015 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
LST EN 4491-2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
LST EN 4488-2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm
LST EN 4492-2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm

AENOR, Anaerobic section

UNE-EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
UNE-EN 15337:2008 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified)

Professional Standard - Aerospace, Anaerobic section

QJ 1992.2-1990/XG 1-1996 Adhesive preparation and bonding process specification Iron anchor 322 anaerobic sealing adhesive bonding process
QJ 1992.3-1990/XG 1-1996 Adhesive preparation and bonding process specification Iron anchor 352 anaerobic sealing adhesive bonding process
QJ 1992.4-1990/XG 1-1996 Adhesive preparation and bonding process specification Iron anchor 372 anaerobic sealing adhesive bonding process
QJ 1992.5-1990/XG 1-1996 Adhesive preparation and bonding process specification Iron anchor 390 anaerobic sealing adhesive bonding process
QJ 1992.1-1990 Adhesive preparation and bonding process specification Iron anchor 302 anaerobic sealing adhesive bonding process
QJ 1992.1-1990/XG 1-1996 Adhesive preparation and bonding process specification Iron anchor 302 anaerobic sealing adhesive bonding process
QJ 1992.3-1990 Adhesive preparation and bonding process specification Iron anchor 352 anaerobic sealing adhesive bonding process
QJ 1992.2-1990 Adhesive preparation and bonding process specification Iron anchor 322 anaerobic sealing adhesive bonding process
QJ 1992.5-1990 Adhesive preparation and bonding process specification Iron anchor 390 anaerobic sealing adhesive bonding process
QJ 1992.4-1990 Adhesive preparation and bonding process specification Iron anchor 372 anaerobic sealing adhesive bonding process

Professional Standard - Agriculture, Anaerobic section

1502药典化学药和生物制品卷-2010 Chapter 23 Drugs for Obstetrics and Gynecology Section 5 Local Drugs for Vagina 2. Ornidazole, an Anti-anaerobic Drug
1501药典化学药和生物制品卷-2010 Chapter 23 Drugs for Obstetrics and Gynecology Section 5 Local Drugs for Vagina 2. Anti-anaerobic Drug Tinidazole

PT-IPQ, Anaerobic section

NP 4417-2002 Food microbiology General guidance for the enumeration of sulphite-reducing bactéria growing under anaerobic conditions (Routine method)