High Energy X-ray Inspection System

High Energy X-ray Inspection System, Total:390 items.

In the international standard classification, High Energy X-ray Inspection System involves: Rubber, Non-destructive testing, Photography, Applications of information technology, Nuclear energy engineering, Protection against crime, Radiation measurements, Radiation protection, Medical equipment, Occupational safety. Industrial hygiene, Optics and optical measurements, Test conditions and procedures in general, Freight distribution of goods, Wastes, Particle size analysis. Sieving, Information technology (IT) in general, Electricity. Magnetism. Electrical and magnetic measurements, Pipeline components and pipelines, Tyres, Analytical chemistry, Soil quality. Pedology, Linear and angular measurements, Components and accessories for telecommunications equipment, Testing of metals, Sterilization and disinfection, Petroleum products in general, Audio, video and audiovisual engineering, Terminology (principles and coordination), Vocabularies, Ceramics, Radiocommunications, Electrical and electronic testing.

Group Standards of the People's Republic of China, High Energy X-ray Inspection System

T/AIA 004-2022 Technical requirements for tire X-ray image vision intelligent detection system
T/QGCML 3980-2024 X-ray detector intelligent data acquisition system
T/CSEE 0307-2022 Technical Guidelines for X-ray Digital Imaging Inspection of High Voltage Switch Epoxy Insulation Components
T/CIRA 39-2022 Distributed static X-ray source computed tomography safety inspection system
T/CIRA 37-2022 Rapid inspection system for railway cargo containers based on X-ray imaging technology
T/CIE 054-2018 Calibration specification for X-ray pulsar navigation detector ground test system
T/CIE 053-2018 Technical requirements for X-ray pulsar navigation detector ground test system
T/CAME 10-2019 Specification for clinical application quality testing in image fusion software of positron emission tomography and computed tomography（PET/CT）
T/LNWTA 003-2019 Determination of elements in the pipe for drinking water —Energy dispersive X-ray fluorescence spertroscopy (EDXRF) method
T/CNFAGS 6-2023 Determination of sulfur and chlorine content in ammonia-containing medium of urea system by X-ray fluorescence spectrometry
T/CIMA 0036-2022 Technical specification for automatic detection system of low-voltage power line high-speed carrier communication unit

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High Energy X-ray Inspection System

GB/T 35394-2017 Non-destructive testing—X-ray digital radiography—System properties
GB/T 36071-2018 Non-destructive testing instruments—technical requirements of X-ray real-time imaging system
GB/T 36015-2018 Non-destructive testing instruments—Performance and testintg rules of industrial digital X-ray imaging system

Professional Standard - Machinery, High Energy X-ray Inspection System

JB/T 11607-2013 Non-destructive testing instruments.Industrial X-ray tyre inspection system
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 5453-2011 Non-destructive testing instruments.Industrial X-ray image intensifer imaging system
JB/T 6215-2011 Non-destructive testing instruments.The series typal table to industrial X-ray tube
JB/T 11602.3-2013 Non-desturctive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 3: Spectrometric detect
JB/T 7808-2010 Non-destructive testing instruments Main parameter series for the industrial X-ray equipment
JB/T 9214-2010 Non-destructive testing.Test methods for evaluating performance characteristics of A-scan pulse-echo ultrasonic testing systems

British Standards Institution (BSI), High Energy X-ray Inspection System

BS EN 584-1:2006 Non-destructive testing - Industrial radiographic film - Classification of film systems for industrial radiography
22/30451249 DC BS IEC 62709. Radiation protection instrumentation. Security screening of humans. Measuring the imaging performance of X-ray systems
BS IEC 62945:2018 Radiation protection instrumentation. Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
BS EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Pinhole camera radiographic method
BS EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Measurement of the effective focal spot size of mini and micro focus X-ray tubes
BS IEC 62709:2014 Radiation protection instrumentation. Security screening of humans. Measuring the imaging performance of X-ray systems
22/30451246 DC BS IEC 62463. Radiation protection instrumentation. X-ray systems for the security screening of persons
BS EN 12543-2:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Pinhole camera radiographic method
BS EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Slit camera radiographic method
18/30335408 DC BS IEC 62963. Radiation protection instrumentation. Bottle / can liquid X-ray computed tomography (CT) inspection systems
BS EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Scanning method
BS EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Edge method
BS EN 12543-1:1999(2008) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Scanning method
BS EN 12543-2:2021 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Pinhole camera radiographic method
23/30474062 DC BS ISO 32543-1 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems.. Part 1: Pinhole camera radiographic method
BS IEC 62963:2020 Radiation protection instrumentation. X-ray computed tomography (CT) inspection systems of bottled/canned liquids
BS EN 61223-3-1:1999 Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for radiographic and radiscopic systems
BS IEC 62463:2010 Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items
BS ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
BS EN 14096-2:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Minimum requirements
BS EN 14096-2:2003(2008) Non-destructive testing - Qualification of radiographic film digitisation systems - Minimum requirements
19/30385969 DC BS EN 12543-2. Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 2. Pinhole camera radiographic method
21/30372607 DC BS ISO 20804. Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
BS EN ISO 11699-1:2011 Non-destructive testing. Industrial radiographic film. Classification of film systems for industrial radiography
BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
BS ISO 9236-3:1999 Photography - Sensitometry of screen/film systems for medical radiography - Determination of sensitometric curve shape, speed and average gradient for mammography
BS EN IEC 61010-2-091:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet X-ray systems
BS EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet x-ray systems
BS EN 14096-1:2003(2008) Non-destructive testing - Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High Energy X-ray Inspection System

GB/T 11685-2003 Measurement procedures for semiconductor X-ray detector system and semiconductor X-ray energy spectrometers
GB/T 13179-2008 Silicon (lithium) X-ray detector system
GB/Z 41399-2022 Non-destructive testing instruments—Industrial digital X-ray imaging system
GB 17060-1997 Radiological protection standard for X-ray luggage inspection system
GB/T 26594-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray tube
GB/T 26830-2011 Non-destructive testing instruments.High frequency constant potential X-ray equipment
GB/T 26592-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray apparatus
GB/T 25758.3-2010 Non-destructive testing.Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.Part 3:Slit camera radiographic method
GB/T 25758.2-2010 Non-destructive testing.Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.Part 2: Pinhole camera radiographic method
GB/T 25758.1-2010 Non-destructive testing.Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.Part 1:Scanning method
GB/T 25758.4-2010 Non-destructive testing.Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.Part 4:Edge method
GB/T 26593-2011 Non-destructive testing instruments.Properties test method for performance of industrial X-ray computed tomography(CT) equipment
GB/T 25758.5-2010 Non-destructive testing.Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
GB/T 42025-2022 Intelligent manufacturing—Radio frequency identification system—Test methods for UHF RFID system performance
GB/T 21355-2008 Non-destructive testing.Classification of computed radiology systems
GB/T 19042.1-2003 Evaluation and routine testing in medical imaging departments--Part 3-1: Acceptance test--Imaging performance of X-ray equipment for radiographic and radioscopic systems
GB/T 31470-2015 Standard practice for determination of the specimen area contributing to the detected signal in Auger electron spectrometers and some X-ray photoelectron spectrometers
GB/T 24791.3-2009 Photography.Sensitometry of screen/film system for medical radiography.Part 3:Determination of sensitometric curve shape,speed and average gradient for mammography
GB/T 42980-2023 Test method for intelligent manufacturing machine vision online inspection system
GB/T 19348.1-2003 Non-destructive testing-Industrial radiographic films-Part 1:Classification of film systems for industrial radiography
GB/T 19348.1-2014 Non-destructive testing.Industrial radiographic film.Part 1:Classification of film systems for industrial radiography
GB/T 28266-2012 Non-destructive testing of pressure equipment.Qualification of radiographic film digitization systems
GB/T 28880-2012 Non-destructive testing.Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
GB/T 29556-2013 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution,analysis area,and sample area viewed by the analyser
GB/T 21356-2008 Non-destructive testing.Qualification and long-term stability of computed radiology systems
GB/T 24791.1-2009 Photography.Sensitometry of screen/film system for medical X-radiography.Part 1:Determination of sensitometric curce shape ,speed and average gradient
GB/T 26141.2-2010 Non-destructive testing.Qualification of radiographic film digitisation systems.Part 2:Minimum requirements

Institute of Electrical and Electronics Engineers (IEEE), High Energy X-ray Inspection System

IEEE/ANSI N42.47-2010 American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
IEEE N42.47-2010 American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
IEEE N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
IEEE STD N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
IEEE/ANSI N42.46-2008 American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
IEEE/ANSI N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
IEEE N42.46-2008 American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
ANSI N42.45-2021 American National Standard for Evaluating the Image Quality of X-ray Computed Tomography (CT) Security-Screening Systems
IEEE/ANSI N42.45-2021 American National Standard for Evaluating the Image Quality of X-ray Computed Tomography (CT) Security-Screening Systems
IEEE/ANSI N42.55-2013 American National Standard for the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification
IEEE N42.53-2021 Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security

American National Standards Institute （ANSI), High Energy X-ray Inspection System

ANSI N42.47-2010 Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
ANSI/HPS N43.16-2021 Radiation Safety for Cargo and Vehicle Security Screening Systems Using X-ray or Gamma Radiation, Energies Up to 10 MeV
ANSI N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
ANSI N42.55-2013 Standard for the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification
ANSI/IEEE N42.53:2021 Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security

American Society for Testing and Materials (ASTM), High Energy X-ray Inspection System

ASTM F1039-87(1993)e1 Standard Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems (Withdrawn 2002)
ASTM F792-88(1993)e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM F792-01 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM F792-01e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM F792-17 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM F792-17e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM E1695-95(2006)e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM F792-01e2 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM C982-88(1997)e1 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
ASTM C982-03 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
ASTM F792-08 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM E1894-18 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-24 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-97 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-08 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-13 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-13a Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-97(2002) Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM F1035-91(1997)e1 Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F1035-03(2015) Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F1035-23 Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F1035-03 Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F1035-03(2008) Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM F1375-92(2005) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1217-11(2019) Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

National Metrological Verification Regulations of the People's Republic of China, High Energy X-ray Inspection System

JJG 2095-2012 Verification Regulation of Measuring Instruments for Air-Kerma of (10~60) kV X-Ray
JJG 2043-2010 Verification Scheme of Measuring Instruments for Air-Kerma of (60～250)kV X-Ray
JJG 2043-1989 Verification Scheme of Measuring Instruments for Exposure of 60～250kV X-Ray (Radiotherapy Level)
JJG 1078-2012 Verification Regulation of X-ray Radiation Sources for Medical Computed Radiography System and Digital Radiography System
JJG 1067-2011 Verification Regulation of Medical Diagnostic X-ray Radiation Source for Medical Digital Subtraction Angiography
JJG 2044-2010 Verification Scheme of Metrological Instruments for Air Kerma of γ Rays
JJG 593-2016 Verification rules for X, gamma radiation thermoluminescence dosimetry system for personal and environmental monitoring
JJG 2039-1989 Verification Scheme of Measuring Instruments for High Accuracy Measurements of Activity and Photon Emission Rate

SE-SIS, High Energy X-ray Inspection System

SIS SS IEC 759:1986 Nuclear instrumentation —Test procedures for semiconductor X-ray energy spectrometers
SIS SS IEC 656:1981 Nuclear instrumentation — Test procedures for high-purity germanium detectors for X and gamma radiation
SIS SS IEC 463:1983 Nuclear instrumentation - Low energy X or gamma radiation portable exposure r?te meters and monitors for use in radiological protection

VDI - Verein Deutscher Ingenieure, High Energy X-ray Inspection System

VDI/VDE 5575 Blatt 2-2013 X-ray optical systems - Measurement methods - Measurement set-up and methods for the evaluation of X-ray optical systems

International Electrotechnical Commission (IEC), High Energy X-ray Inspection System

IEC 62945:2018 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
IEC 62709:2014 Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems
IEC 62963:2020 Radiation protection instrumentation - X-ray computed tomography (CT) inspection systems of bottled/canned liquids
IEC 61453:2007 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests
IEC 62387:2012 Radiation protection instrumentation - Passive integrating dosimetry systems for personal and environmental monitoring of photon and beta radiation
IEC 61010-2-091:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
IEC 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems
IEC 61010-2-091:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems

GSO, High Energy X-ray Inspection System

GSO IEC 62945:2021 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
BH GSO IEC 62945:2022 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
GSO ISO 11699-1:2013 Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography
OS GSO ISO 11699-1:2013 Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography
OS GSO IEC 61223-2-6:2014 Evaluation and routine testing in medical imaging departments Part 26: Constancy tests Imaging performance of computed tomography X-ray equipment
BH GSO IEC 61223-2-6:2016 Evaluation and routine testing in medical imaging departments Part 26: Constancy tests Imaging performance of computed tomography X-ray equipment
GSO IEC 60601-2-54:2013 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
GSO ISO 14096-2:2013 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements
OS GSO ISO 14096-2:2013 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements

AT-ON, High Energy X-ray Inspection System

ONORM S 5240-18-2000 Image quality assurance in X-ray diagnosis-Acceptance testing for X-ray-systems with digital image receptor systems in projection radiography
ONORM S 5240-8-2002 Image quality assurance in X-ray diagnosis - Part 8:Constancy testing for X-ray-systems with digital image receptor systems in projection radiography
ONORM S 5265-1-2000 Non-destructive testing - Radiation protection rules for technical application of X-ray equipments with rated voltages up to 450 kV
OENORM EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
ONORM S 5265-2-2001 Non-destructive testing - Radiation protection rules for technical application of gammagraphy
ONORM S 5240-15-2000 Assurance of lmage quality in diagnostic X-ray departments - Acceptance testing in direct radiographic and fluoroscopic X-ray-systems including film processing

Occupational Health Standard of the People's Republic of China, High Energy X-ray Inspection System

GBZ 177-2006 Radiological protection standards for portable X-ray inspection system
GBZ 127-2002 Radiological protection standard for X-ray luggage inspection system

国家卫生计生委, High Energy X-ray Inspection System

WS 522-2017 Quality control and testing specifications for digital mammography systems
WS 518-2017 Quality control and testing specifications for mammography screen radiography systems
WS 521-2017 Medical digital radiography (DR) system quality control and testing specifications
WS 530-2017 Breast computed tomography system quality control and testing specifications

Military Standard of the People's Republic of China-General Armament Department, High Energy X-ray Inspection System

GJB 9763-2020 High-energy X-ray tomography detection method of solid rocket motor combustion chamber
GJB 9547-2018 High-energy X-ray photography detection method of large solid rocket motor combustion chamber

SCC, High Energy X-ray Inspection System

VDI/VDE 5575 BLATT 2-2019 X-ray optical systems - measurement methods; Measurement setup and methods for evaluating x-ray optical systems
NS-EN 12543-5:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
DANSK DS/EN 12543-5:1999 Non-destructive testing - Characteristics of focal spot in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
DIN IEC 62945:2019 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems (IEC 62945:2018)
NS-EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
NS-EN 12543-2:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 2: Pinhole camera radiographic method
DANSK DS/EN 12543-3:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 3: Slit camera radiographic method
NS-EN 12543-2:2008 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 2: Pinhole camera radiographic method
NS-EN 12543-3:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 3: Slit camera radiographic method
NS-EN 12543-4:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 4: Edge method
DANSK DS/EN 12543-1:2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
DANSK DS/EN 12543-4:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 4: Edge method
NS-EN 12543-1:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 1: Scanning method
DANSK DS/EN 12543-2:2021 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method
UNE-EN 12543-2:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 2: PINHOLE CAMERA RADIOGRAPHIC METHOD.
DIN IEC 62945 E:2016 Draft Document - Radiation protection instrumentation - Measuring the imaging performance of X-ray Computed Tomography (CT) security screening systems (IEC 45B/833/CD:2015)
DIN EN 12543-2 E:2019 Draft Document - Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German and English version prEN 12543-2:2019
DIN IEC 62709 E:2014 Draft Document - Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems (IEC 62709:2014)
BS 2000-336:1990 Methods of test for petroleum and its products-Sulphur in petroleum products by energy-dispersive X-ray fluorescence (non-dispersive X-ray fluorescence)
CEI EN 61223-3-1:2001 Evaluation and routine testing in medical imaging departments - Part 3: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems
NEMA XR 11-1993(R1999) Test Standard for the Determination of the Limiting Spatial Resolution of X-Ray Image Intensifier Systems
NEMA XR 18-1993(R1999) Test Standard for the Determination of the Radial Image Distortion of an X-Ray Image Intensifier (XRII) System
DIN IEC 62963 E:2016 Draft Document - Radiation protection instrumentation - Bottle/can liquid X-ray CT (computed tomography) inspection system (IEC 45B/835/CD:2015)
NEMA XR 17-1993(R1999) Test Standard for the Measurement for the Image Signal Uniformity of an X-Ray Image Intensifier (XRII) System
UNE-EN 584-1:2007 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
DANSK DS/EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
DANSK DS/EN 584-1:2006 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
NS-EN 584-1:2006 Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography
UNE-EN 584-1:1996 NON DESTRUCTIVE TESTING. INDUSTRIAL RADIOGRAPHIC FILM. PART 1: CLASSIFICATION OF FILM SYSTEMS FOR INDUSTRIAL RADIOGRAPHY
NS-EN 584-1:1994 Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography
DIN 6868-157 E:2020 Draft Document - Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
CAN/CGSB 3.0 No.16.1-1998 Méthodes d'essai des produits pétroliers et produits connexes - Soufre dans l'essence par spectrométrie de fluorescence X à dispersion d'énergie (EDXRF)
UNE-EN 61223-3-2:1998 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS. PART 3-2: ACCEPTANCE TESTS. IMAGING PERFORMANCE OF MAMMOGRAPHIC X-RAY EQUIPMENT.
NS-EN ISO 11699-1:2011 Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
DANSK DS/EN 14096-2:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: Minimum requirements
DIN EN ISO 11699-1 E:2011 Draft Document - Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008); German version FprEN ISO 11699-1:2011
DIN 6868-13 E:2010 Draft Document - Image quality assurance in diagnostic X-ray departments - Part 13: Constancy testing of projection radiography systems with digital image receptors
DANSK DS/ISO 14096-2:2019 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: Minimum requirements
NS-EN 14096-2:2003 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements
CEI EN 61010-2-091:2014 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-091: Particular requirements for cabinet x-ray systems
DANSK DS/EN 61010-2-091/AC:2013 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet x-ray systems
DANSK DS/EN 62803:2016 Transmitting equipment for radiocommunication – Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems – Measurement method
CEI EN 62803:2017 Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems - Measurement method

European Committee for Standardization (CEN), High Energy X-ray Inspection System

EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 12543-2:1999 Non-Destructive Testing - Characteristics of Focal Spots in Industrial X-Ray Systems for Use in Non-Destructive Testing - Part 2: Pinhole Camera Radiographic Method
EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
EN 14096-2:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements
EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
EN 584-1:1994 Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography
EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis

Association Francaise de Normalisation, High Energy X-ray Inspection System

NF A09-217-1:2006 Non destructive testing - Industrial radiographic film - Part 1 : classification of film systems for industrial radiography.
NF EN ISO 14096-2:2020 Non-destructive testing - Qualification of x-ray film scanning systems - Part 2: minimum requirements
NF A09-231-2*NF EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2 : pinhole camera radiographic method
NF A09-231-5*NF EN 12543-5:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 5 : measurement of the effective focal spot size of mini and micro focus X-ray tubes.
NF A09-231-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method.
NF A09-231-3*NF EN 12543-3:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 3 : slit camera radiographic method
NF A09-252-2:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2 : minimum requirements.
NF A09-231-4*NF EN 12543-4:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 4 : edge method.
NF A09-231-1*NF EN 12543-1:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 1 : scanning method
NF ISO 22127:2020 Dosimetry with glass-type radiophotoluminescent dosimeters used for dosimetric auditing in high-energy X-ray radiotherapy
NF EN 61223-3-1:2005 Evaluation and routine testing in medical imaging departments - Part 3-1: acceptance testing - Imaging performance of X-ray devices for radiographic and fluoroscopic systems
NF EN ISO 11699-1:2012 Non-destructive testing - Industrial radiography film - Part 1: classification of industrial radiography film systems
NF EN ISO 14096-1:2020 Non-destructive testing - Qualification of x-ray film scanning systems - Part 1: definitions, quantitative measurements of image quality parameters, standardized reference film and quality control
NF C90-302-10*NF EN 60835-2-10:1993 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 2 : measurements on terrestrial radio-relay systems. Section ten : Overall system performance.
NF A09-252-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.
NF A09-252-2*NF EN ISO 14096-2:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2 : minimum requirements
NF A09-214:1985 Non-destructive testing. Industrial radiology. Determination of the sensitivity and average contrast of image receiver systems consisting of a fluorescent intensifier screen and radiographic paper, used in the energy range from 30 keV to 150 keV.
NF C90-301-4*NF EN 60835-1-4:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1 : measurements common to terrestrial radio-realy systems and satellite earth stations. Section 4 : transmission performance.
NF C42-020-2-091*NF EN IEC 61010-2-091:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091 : particular requirements for cabinet X-ray systems
NF C42-020-2-091/A11*NF EN IEC 61010-2-091/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091 : particular requirements for cabinet X-ray systems
NF C97-411*NF EN 61305-1:1995 Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. Part 1 : general.

German Institute for Standardization, High Energy X-ray Inspection System

DIN EN 12543-5:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes; German version EN 12543-5:1999
DIN EN 12543-2:2021-06 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German version EN 12543-2:2021
DIN EN 12543-3:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method; German version EN 12543-3:1999
DIN EN 12543-4:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999
DIN EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method; German version EN 12543-3:1999
DIN EN 12543-1:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
DIN EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes; German version EN 12543-5:1999
DIN EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
DIN EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; English version of DIN EN 12543-2:2008-10
DIN EN 12543-2:2019 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German and English version prEN 12543-2:2019
DIN IEC 62463:2012 Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items (IEC 62463:2010)
DIN EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999
DIN IEC 62709:2015 Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems (IEC 62709:2014)
DIN 6868-4:2021-03 Image quality assurance in diagnostic X-ray departments - Part 4: Constancy testing of medical X-ray equipment for projection radiography with digital image receiver systems and fluoroscopy
DIN IEC 61453:2008 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks (IEC 61453:2007)
DIN IEC 62963:2020 Radiation protection instrumentation - X-ray computed tomography (CT) inspection systems of bottled/canned liquids (IEC 62963:2020)
DIN 6868-157:2022-01 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN 6855-4:2004 Quality control of nuclear medicine instruments - Part 4: Constancy testing of positron emission tomographs (PET)
DIN 6868-157:2022 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN V 6868-55:1996-10 Image quality assurance in X-ray diagnosis - Part 55 Acceptance testing in direct radiographic and fluoroscopic X-ray-systems including film processing
DIN EN ISO 11699-1:2012-01 Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008); German version EN ISO 11699-1:2011
DIN EN 61223-3-1:2001 Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999
DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; English version of DIN EN 725-4:2006-07
DIN EN ISO 14096-2:2020-10 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005); German version EN ISO 14096-2:2020

VDE - VDE Verlag GmbH@ Berlin@ Germany, High Energy X-ray Inspection System

VDE 0412-13-2019 Strahlenschutz-Messgeraete - Messung der Bildqualitaet von Roentgen-Computertomographen (CT)@ die fuer die Sicherheitskontrolle eingesetzt werden (IEC 62945:2018)
VDE 0412-12-2015 Strahlenschutzinstrumentierung - Sicherheitskontrolle von Personen - Messung der Bildqualitaet von Roentgensystemen (IEC 62709:2014)

Professional Standard - Public Safety Standards, High Energy X-ray Inspection System

GA/T 1731-2020 Technical requirements for passenger vehicle X-ray safety inspection system

未注明发布机构, High Energy X-ray Inspection System

ANSI N42.46-2008(R2017) American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
ASTM RR-F12-1001 1987 F0792-Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
DIN 6868-4 E:2019-05 Image quality assurance in diagnostic X-ray departments - Part 4: Constancy testing of medical X-ray equipment for projection radiography with digital image receiver systems and fluoroscopy
DIN 6868-4:2020-10 Image quality assurance in diagnostic X-ray departments - Part 4: Constancy testing of medical X-ray equipment for projection radiography with digital image receiver systems and fluoroscopy
DIN IEC 61453:1999 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks
DIN 6855-4 E:2015-03 Quality control of nuclear medicine instruments - Part 4: Constancy testing of positron emission tomographs (PET)
DIN 6868-157 E:2012-02 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN 6868-157 E:2013-11 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN 6868-157 E:2020-11 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN EN ISO 14096-2 E:2019-10 Qualification of radiographic film digitization systems for nondestructive testing Part 2: Minimum requirements (draft)
CSA C22.2 No.61010-2-091-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-091: Particular requirements for cabinet X-ray systems

Danish Standards Foundation, High Energy X-ray Inspection System

DS/EN 12543-2:2021 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method
DS/EN 12543-5:2000 Non-destructive testing - Characteristics of focal spot in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
DS/EN 12543-3:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
DS/EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
DS/EN 12543-1:2002 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
DS/EN 12543-4:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
DS/EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
DS/EN 14096-2:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements
DS/EN IEC 61010-2-091:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray systems
DS/EN 61010-2-091/AC:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems
DS/EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems

ES-UNE, High Energy X-ray Inspection System

UNE-EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
UNE-EN ISO 14096-2:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
UNE-EN IEC 61010-2-091:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN IEC 61010-2-091:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN 61010-2-091:2012/AC:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems

AENOR, High Energy X-ray Inspection System

UNE-EN 12543-5:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR UE IN NON-DESTRUCTIVE TESTING - PART 5: MEASUREMENT OF THE EFFECTIVE FOCAL SPOT SIZE OF MINI AND MICRO FOCUS X-RAY TUBES.
UNE-EN 12543-2:2009 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
UNE-EN 12543-4:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 4: EDGE METHOD.
UNE-EN 12543-1:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 1: SCANNING METHOD.
UNE-EN 61223-3-1:2000 Evaluation and routine testing in medical imaging departments -- Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems.
UNE-EN 12543-3:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TETING - PART 3: SLIT CAMERA RADIOGRAPIC METHOD.
UNE-EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
UNE-EN 14096-2:2003 Non-destructive testing- Qualification of radiographic film digitisation systems- Part 2: Minimum requirements.
UNE-EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems

International Organization for Standardization (ISO), High Energy X-ray Inspection System

ISO/DIS 32543-1:2023 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method
ISO 32543-1:2024 Non-destructive testing-Characteristics of focal spots in industrial X-ray systems-Part 1: Pinhole camera radiographic method
ISO 11699-1:2008 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
ISO 19668:2017 Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials
ISO/TR 19319:2003 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area, and sample area viewed by the analyser
ISO 16371-1:2011 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems

PL-PKN, High Energy X-ray Inspection System

PN-EN 12543-2-2021-09 E Non-destructive testing -- Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing -- Part 2: Pinhole camera radiographic method

Association of German Mechanical Engineers, High Energy X-ray Inspection System

VDI/VDE 5575 Blatt 2-2015 X-ray optical systems - Measurement methods - Measurement set-up and methods for the evaluation of X-ray optical systems

GB-REG, High Energy X-ray Inspection System

REG NASA-LLIS-0753-2000 Lessons Learned ?Integrated Optical Performance Modeling of X-Ray Systems

Lithuanian Standards Office , High Energy X-ray Inspection System

LST EN 12543-3-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
LST EN 12543-5-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
LST EN 12543-2-2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
LST EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
LST EN 12543-1-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
LST EN 12543-4-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
LST EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
LST EN 14096-2-2004 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements
LST EN 61010-2-091-2012/AC-2013 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-091: Particular requirements for cabinet X-ray systems
LST EN IEC 61010-2-091/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
LST EN 61223-3-5-2005 Evaluation and routine testing in medical imaging departments. Part 3-5: Acceptance tests. Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2004)

国家市场监督管理总局、中国国家标准化管理委员会, High Energy X-ray Inspection System

GB/T 37128-2018 Technical requirements for X-ray computed tomography security inspection systems
GB/T 41105.3-2021 Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 3:Spectrometric method
GB/T 40659-2021 Intelligent manufacturing—Online detection system based on machine vision—General requirements
GB/T 21355-2022 Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—Classification of systems
GB/T 38238-2019 Non-destructive testing instruments—Infrared thermography—System and equipment—Description of characteristics

Professional Standard - Electron, High Energy X-ray Inspection System

SJ/T 11094-1996 Performance parameters and methods of measurement for medical X-ray image intensifier television systems
SJ/T 11322-2006 Measurement method for reflector antenna and servo gear system mechnical performance

CH-SNV, High Energy X-ray Inspection System

SN EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

IT-UNI, High Energy X-ray Inspection System

UNI EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

CEN - European Committee for Standardization, High Energy X-ray Inspection System

PREN 12543-2-2019 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 584-1:2006 Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography

Korean Agency for Technology and Standards (KATS), High Energy X-ray Inspection System

KS C IEC 61223-3-1-2013 Evaluation and routine testing in medical imaging departments－Part 3－1：Acceptance tests－Imaging performance of X-ray equipment for radiographic and radioscopic systems
KS C IEC 62523:2019 Radiation protection insturmentation — Cargo/vehicle radiographic inspection system
KS A IEC 61137:2003 Radiation protection instrumentation-Installed personnel surface contamination monitoring assembly-Low energy X and gamma emitters
KS C IEC 61223-3-1:2013 Evaluation and routine testing in medical imaging departments－Part 3－1：Acceptance tests－Imaging performance of X-ray equipment for radiographic and radioscopic systems
KS B ISO 11699-1-2016(2021) Non-destructive testing－Industrial radiographic films－Part 1：Classification of film systems for industrial radiography
KS C IEC 61223-3-1-2005(2010) Evaluation and routine testing in medical imaging departments－Part 3－1：Acceptance tests－Imaging performance of X-ray equipment for radiographic and radioscopic systems
KS B ISO 11699-1:2022 Non-destructive testing — Industrial radiographic film —Part 1: Classification of film systems for industrial radiography
KS C IEC 61559-1:2012 Radiation protection instrumentation in nuclear facilities－Centralized systems for continuous monitoring of radiation and/or levels of radioactivity－Part 1：General requirements
KS A IEC 60532:2003 Radiation protection instrumentation-Installed dose ratemeters, warning assemblies and monitors-X and gamma radiation of energy between 50 keV and 7 MeV
KS A IEC 60532:2016 Radiation protection instrumentation－Installed dose ratemeters, warning assemblies and monitors－X and gamma radiation of energy between 50 keV and 7 MeV
KS C IEC 61305-2:2002 Household high-fidelity audio equipment and systems-Methods of measuring and specifying the performance-Part 2:FM radio tuners
KS B ISO 14096-2-2007(2017) Non-destructive testing－Qualification of radiographic film digitisation systems－Part 2：Minimum requirements
KS B ISO 14096-2-2007(2022) Non-destructive testing－Qualification of radiographic film digitisation systems－Part 2：Minimum requirements
KS D ISO 19319:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS A ISO 14850-1:2012 Nuclear energy-Waste-packages activity measurement-Part 1:High-resolution gamma spectrometry in integral mode with open geometry

KR-KS, High Energy X-ray Inspection System

KS C IEC 62523-2019 Radiation protection insturmentation — Cargo/vehicle radiographic inspection system
KS B ISO 11699-1-2016 Non-destructive testing－Industrial radiographic films－Part 1：Classification of film systems for industrial radiography
KS B ISO 11699-1-2022 Non-destructive testing — Industrial radiographic film —Part 1: Classification of film systems for industrial radiography
KS B ISO 14096-2-2023 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements

RU-GOST R, High Energy X-ray Inspection System

GOST 8.473-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed X-ray radiation fluence energy
GOST 8.034-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring exposure dose, exposure dose rate and fluense energy of X-and-gamma radiation
GOST R ISO 16243-2016 State system for insuring the uniformity of measurements Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
GOST R ISO 9236-3-2009 Sensitometry of screen/film systems for medical radiography. Part 3. Determination of sensitometric curve shape, speed and average gradient for mammographiy

Professional Standard - Medicine, High Energy X-ray Inspection System

YY/T 1408-2016 Performance characteristics and test methods of imaging system of single photon emission and X-ray computed tomograph
YY/T 0829-2011 Characteristics and test methods for imaging system of positron emission and X-ray computed tomography
YY 0775-2010 Teleradiotherapy treatment planning system accuracy of dosimetric calculation and test methods for high energy X(γ) beam

Standard Association of Australia （SAA）, High Energy X-ray Inspection System

AS 2168.1:2009 Computerized Radiography System for Nondestructive Testing
AS/NZS 4184.3.2:1998 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of mammographic X-ray equipment

Fujian Provincial Standard of the People's Republic of China, High Energy X-ray Inspection System

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

工业和信息化部, High Energy X-ray Inspection System

HG/T 6114-2022 Rapid detection method for heavy metals in waste acid: energy-dispersive X-ray fluorescence spectrometry

NEMA - National Electrical Manufacturers Association, High Energy X-ray Inspection System

NEMA XR 17-1993 Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier System
NEMA XR 11-1987 Test Standard for Determination of the Limiting Spatial Resolution of X-Ray Image Intensifier Systems

GOST, High Energy X-ray Inspection System

GOST IEC 62463-2018 Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., High Energy X-ray Inspection System

IEEE N42.55-2013 Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification
IEEE N42.53-2013 Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security

Hebei Provincial Standard of the People's Republic of China, High Energy X-ray Inspection System

DB13/T 5396-2021 Rapid detection of cadmium, arsenic, lead, chromium, copper, nickel, zinc in farmland soils by energy-dispersive X-ray fluorescence spectrometry

International Telecommunication Union (ITU), High Energy X-ray Inspection System

ITU-R QUESTION 218-11-2007 Techniques for measurement of radiation from high data rate telecommunication systems using wired electrical power supply
ITU-R QUESTION 218-1/1-2007 Techniques for measurement of radiation from high data rate telecommunication systems using wired electrical power supply
ITU-R F.1337-1997 Frequency Management of Adaptive HF Radio Systems and Networks Using FMCW Oblique-Incidence Sounding

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, High Energy X-ray Inspection System

QUESTION 218-1/1-2007 Techniques for measurement of radiation from high data rate telecommunication systems using wired electrical power supply

YU-JUS, High Energy X-ray Inspection System

JUS N.N6.182-1978 Radiocommunications. Wired distribution systems. Methods of measurements. Television RF signal to noise ratio. Checks on the measuring eguipment.

ZA-SANS, High Energy X-ray Inspection System

SANS 11699-1:2005 Non-destructive testing - Industrial radiographic films Part 1: Classification of film systems for industrial radiography

Professional Standard - Petroleum, High Energy X-ray Inspection System

SY 6970-2013 Technical specifications for on-line corrosion detection of surface gathering and transportation systems in high hydrogen sulfide gas fields

Professional Standard - Agriculture, High Energy X-ray Inspection System

SN/T 1732.22-2018 Pyrotechnic agents for fireworks and firecrackers - Part 22: Qualitative detection of lead, chromium, cadmium, mercury and arsenic by energy-dispersive X-ray fluorescence spectrometry

Sichuan Provincial Standard of the People's Republic of China, High Energy X-ray Inspection System

DB51/T 2190-2016 General Technical Specifications for On-line Detection and Status Evaluation System of Electric Energy Metering Devices

Professional Standard - Radio Television Film, High Energy X-ray Inspection System

GY/T 186-2002 Specifications and methods of measurement on shielding performance of RF cable used in CATV systems

NL-NEN, High Energy X-ray Inspection System

NEN 10835-2-10-1993 Methods of measurement for equipment used in digital micro-wave radio transmission systems. Part 2: Measurements on terrestrial radio-relay systems. Section ten: Overall system performance (IEC 835-2-10:1992)

ETSI - European Telecommunications Standards Institute, High Energy X-ray Inspection System

PRETS 300 836-1-1997 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification
PRETS 300 836-1-1998 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification

GOSTR, High Energy X-ray Inspection System

GOST R 50.05.07-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Radiographic examination

European Committee for Electrotechnical Standardization（CENELEC）, High Energy X-ray Inspection System

EN 61262-5:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 5: Determination of the Detective Quantum Efficiency
EN IEC 61010-2-091:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
EN 62803:2016 Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in highfrequency radio over fibre systems - Measurement method