ZH
RU
ES

dynamic gas adsorption

dynamic gas adsorption, Total:435 items.

In the international standard classification, dynamic gas adsorption involves: Powder metallurgy, Particle size analysis. Sieving, Air quality, Analytical chemistry, Products of the chemical industry, Protective equipment, Physics. Chemistry, Construction materials, Cargo equipment, Ceramics, Coals, Vocabularies, Railway rolling stock, Mining and quarrying, Measurement of volume, mass, density, viscosity, Fuels, Rotating machinery, Medical equipment, Animal feeding stuffs, Nuclear energy engineering, Occupational safety. Industrial hygiene, Protection against fire, Compressors and pneumatic machines, Paper and board, Pulps, Photography, Linear and angular measurements, Electronic tubes, Farming and forestry, Raw materials for rubber and plastics, Bearings, Environmental protection, Soil quality. Pedology, Internal combustion engines, Aerospace fluid systems and components, Fluid power systems, Veterinary medicine, Food products in general, Sports equipment and facilities.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, dynamic gas adsorption

GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 8770-1988 Determination of dynamic adsorbed water for molecular sieve
GB/T 8770-2014 Determination of dynamic water absorption capability for molecular sieve
GB/T 9506.5-1988 Test method for nitrogen-released and gas-absorbed dynamic curve of nitrogen-doped getter
GB/T 10505.3-1989 Determination of static absorbed ethene and nitrogen for molecular sieve 3A
GB 10505.3-1989 3A Molecular Sieve Static Ethylene and Nitrogen Adsorption Determination Method
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 21650.3-2011 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 3:Analysis of micropores by gas adsorption
GB/T 21650.2-2008 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 2: Analysis of mesopores and macropores by gas adsorption
GB/T 12373-1990 Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas
GB/T 22921-2008 Paper and board.Determination of water vapour transmission rate of sheet materials.Dynamic sweep and static gas methods
GB/T 5275.10-2009 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 10:Permeation method
GB/T 5275.2-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 2:Volumetric pumps
GB/T 5275.8-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 8:Diffusion method
GB/T 5275.9-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 9:Saturation method
GB/T 5275.2-2022 Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps
GB/T 5275.1-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 1:Methods of calibration
GB/T 5275.6-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 6:Gritical orifices
GB/T 5275.4-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 4:Continuous syringe injection method
GB/T 5275.6-2023 Preparation of gas mixtures for calibration by dynamic method of gas analysis - Part 6: Critical flow orifice
GB/T 5275.5-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 5:Capillary calibration devices
GB/T 5275.11-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 11:Electrochemical generation
GB/T 21650.1-2008 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 1: Mercury porosimetry
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers
GB/T 42162-2022 Rubber, raw—Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography—Thermal desorption (dynamic headspace) method

Association of German Mechanical Engineers, dynamic gas adsorption

VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
VDI 2100 Blatt 3-2011 Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption
VDI 3674-2013 Waste gas cleaning by adsorption - Process gas and waste gas cleaning
VDI 2454 Blatt 1-1982 Gaseous air pollution measurement; measurement of hydrogen sulphide concentration; molybdenum blue sorption method
VDI 2470 Blatt 1-1975 Gaseous emission measurement; measurement of gaseous fluorine compounds; absorption method
VDI 3490 Blatt 6-1988 Measurement of gases; calibration gas mixtures; dynamic; preparation by gas-mixing pumps
VDI 3490 Blatt 7-1980 Measurement of gases; calibration gas mixtures; dynamic method of preparation by periodic injection
VDI 2452 Blatt 3-1987 Gaseous air pollution measurement; measurement of fluoride ion concentration; sorption method with prepared silver balls and heated membrane filter
VDI 3490 Blatt 16-1994 Measurement of gases - Calibration gas mixtures - Dynamic preparation with critical orifice systems
VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers
VDI 2457 Blatt 3-1996 Gaseous emission measurements - Gas chromatographic determination of organic compounds - Determination of substituted anilines - Sampling by solid phase adsorption
VDI 3865 Blatt 3-1998 Measurement of organic soil pollutants - Gas-chromatographic determination of volatile organic compounds in soil gas adsorption at activated carbon and desorption with organic solvents

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., dynamic gas adsorption

ASHRAE 4658-2003 Solid Sorption Gas-Fired Heat Pump
ASHRAE AT-96-20-1-1996 Advanced Sorption Chillers for Gas Cooling

Professional Standard - Agriculture, dynamic gas adsorption

GB 8770-1988 Molecular sieve dynamic water adsorption determination method

British Standards Institution (BSI), dynamic gas adsorption

BS ISO 16900-4:2013 Respiratory protective devices. Methods of test and test equipment. Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
BS ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Analysis of micropores by gas adsorption
BS ISO 15901-2:2006(2007) Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS ISO 15901-2:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of nanopores by gas adsorption
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS EN 15590:2011 Solid recovered fuels. Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
20/30410823 DC BS ISO 15901-2. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Part 2. Analysis of nanopores by gas adsorption
BS EN ISO 6145-6:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
BS EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Critical orifices
BS ISO 6145-2:2014 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Piston pumps
BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6145-9:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN ISO 6145-9:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS ISO 16900-4:2011 Respiratory protective devices. Methods of test and test equipment. Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
BS ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
BS EN 1076:1997 Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods
BS EN 1076:2010 Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods
BS 7406:1991 Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods
BS EN ISO 6145-11:2006 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
BS EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11:Electrochemical generation
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS 7591-2:1992 Porosity and pore size distribution of materials - Method of evaluation by gas adsorption
BS EN ISO 6145-4:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Continuous syringe injection method
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS ISO 9932:2021 Tracked Changes. Paper and board. Determination of water vapour transmission rate of sheet materials. Dynamic sweep and static gas methods
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS 8447:2005 Anaesthetic and respiratory equipment - Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS DD CEN/TS 15590:2007 Solid recovered fuels - Determination of potential rate of microbial self heating using the real dynamic respiration index
DD CEN/TS 15590:2007 Solid recovered fuels — Determination of potential rate of microbial self heating using the real dynamic respiration index
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS ISO 8178-4:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Steady-state and transient test cycles for different engine applications
BS ISO 15901-1:2006 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Mercury porosimetry
BS EN 15333-2:2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Free flow apparatus
BS PD CEN/TS 13649:2014 Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption
BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS 6069 Sec.3.3:1991 Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous chlorinated hydrocarbons by charcoal tube/solvent desorption/gas chromatography
BS ISO 16000-6:2021 Tracked Changes. Indoor air. Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID
BS ISO 16111:2018 Tracked Changes. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
BS EN ISO 18757:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method

German Institute for Standardization, dynamic gas adsorption

DIN 66138:2008 Isothermal measurement of the sorption of vapours at solids
DIN 66138:2008-09 Isothermal measurement of the sorption of vapours at solids
DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN ISO 9277:2014 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN 24557-2:1990-11 Fluid power; air breathers; connecting dimensions
DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN 66135-2:2001 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
DIN 66135-3:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN 51898-1:2014-05 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM / Note: CD-ROM enclosed
DIN 51898-2:2017-10 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
DIN 66135-1:2001 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN 66136-1:2017-02 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles / Note: To be replaced by DIN 66136-1 (2022-12).
DIN EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003); English version of DIN EN ISO 6145-6:2008-11
DIN 51865-1:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 1: Chemisorption on Iodine, atomic absorption spectrometry (AAS)
DIN 66136-1:2017 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles
DIN 66136-1:2004 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles
DIN EN 15590:2011-11 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index; German version EN 15590:2011
DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11
DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN CEN/TS 13649:2015-03*DIN SPEC 33969:2015-03 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption; German version CEN/TS 13649:2014
DIN 51865-3:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 3: Absorption in solutions, atomic absorption spectrometry (AAS)
DIN EN 1911-2:1998 Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption; German version EN 1911-2:1998
DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); English version of DIN EN ISO 6145-11:2008-11
DIN 66135-2:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN CEN/TS 15590:2007 Solid recovered fuels - Determination of potential rate of microbial self heating using the real dynamic respiration index; German version CEN/TS 15590:2007
DIN EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); English version of DIN EN ISO 6145-4:2008-11
DIN 66135-4:2004-09 Particle size analysis - Micropore analysis by gas adsorption - Part 4: Determination of pore distribution according to Horvath-Kawazoe and Saito-Foley
DIN ISO 16900-4:2017 Respiratory protective devices - Methods of test and test equipment - Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing (ISO 16900-4:2011)
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN EN ISO 6145-5:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN EN ISO 6145-10:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); German version EN ISO 6145-10:2008
DIN EN ISO 6145-9:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009); German version EN ISO 6145-9:2010
DIN EN ISO 6145-8:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); German version EN ISO 6145-8:2008
DIN EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
DIN EN ISO 6145-6:2017-12 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017); German version EN ISO 6145-6:2017
DIN EN ISO 6145-11:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); German version EN ISO 6145-11:2008
DIN EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods; German version EN 1076:2009
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-4:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); German version EN ISO 6145-4:2008

Society of Automotive Engineers (SAE), dynamic gas adsorption

SAE ARP1109-1969 DYNAMIC TESTING SYSTEM FOR OXYGEN BREATHING EQUIPMENT
SAE ARP1109B-1997 Dynamic Testing Systems for Oxygen Breathing Equipment
SAE ARP1109B-2017 Dynamic Testing Systems for Oxygen Breathing Equipment
SAE AS5861A-2015 Retainers@ (Back-Up Rings)@ Hydraulic and Pneumatic@ Polytetrafluoroethylene Resin@ Solid@ Static Gland

International Organization for Standardization (ISO), dynamic gas adsorption

ISO 9277:1995 Determination of the specific surface area of solids by gas adsorption using the BET method
ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 15901-2:2006 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption
ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption
ISO 15901-2:2006/cor 1:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption; Technical Corrigendum 1
ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
ISO 9932:1990 Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods
ISO 9932:2021 Paper and board - Determination of water vapour transmission rate of sheet materials - Dynamic sweep and static gas methods
ISO 6145-3:1986 Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 3: Periodic injections into a flowing gas stream
ISO 7589:2002 Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer
ISO 6145-2:2014 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps
ISO 16900-4:2011 Respiratory protective devices - Methods of test and test equipment - Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
ISO 6145-9:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps
ISO 6145-6:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
ISO 6145-9:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 6145-6:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 6 : Sonic orifices
ISO 6145-10:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
ISO 6145-8:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 6145-1:2019 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation
ISO 6145-4:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 4 : Continuous injection method
ISO 15901-1:2005 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry
ISO 15901-1:2016 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry
ISO 6145-7:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 6145-11:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6145-4:2004 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
ISO 17052:2007 Rubber, raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method
ISO 6145-9:2001/Cor 1:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method; Technical Corrigendum 1
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications

Professional Standard - Chemical Industry, dynamic gas adsorption

HG/T 2691-1995 Determination of Dynamic Carbon Dioxide Adsorption by Zeolite Molecular Sieves

SAE - SAE International, dynamic gas adsorption

SAE ARP1109A-1987 Dynamic Testing Systems for Oxygen Breathing Equipment

Professional Standard - Environmental Protection, dynamic gas adsorption

HJ 583-2010 Ambient air.Determination of benzene and its analogies using sorbent adsorption thermal desorption and gas chromatography
HJ 917-2017 Determination of Gaseous Mercury in Exhaust Gases from Stationary Pollution Sources Activated Carbon Adsorption/Pyrolysis Atomic Absorption Spectrophotometry

VN-TCVN, dynamic gas adsorption

TCVN 3896-1984 Natural gases.Method of absorption for the determination of carbon dioxide and total of gaseous acid contents by VTI-2

Korean Agency for Technology and Standards (KATS), dynamic gas adsorption

KS M 1429-2004 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS B ISO 3322:2007 Fluid power systems and components-Cylinders-Nominal pressures
KS B ISO 3322:2013 Fluid power systems and components－Cylinders－Nominal pressures
KS M ISO 9932:2019 Paper and board－Determination of water vapour transmission rate of sheet materials－Dynamic sweep and static gas methods
KS A ISO 7589:2007 Photography－Illuminants for sensitometry－Specifications for daylight, incandescent tungsten and printer
KS I ISO 6145-6-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS I ISO 6145-2-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-8-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS L ISO 18757-2012(2017) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS L ISO 18757-2012(2022) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS I ISO 6145-2:2007 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 2:Volumetric pumps
KS I ISO 6145-6:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 6:Sonic orifices
KS I ISO 6145-9:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 9:Saturation method
KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
KS I ISO 6145-1:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-2:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-6:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-9:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 9：Saturation method
KS I ISO 6145-10:2008 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 10:Permeation method
KS I ISO 6145-8:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 8:Diffusion method
KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-10:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 10：Permeation method
KS I ISO 6145-8:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS I ISO 6145-11-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-11:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 11:Electrochemical generation
KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-11:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS M ISO 17052-2012(2022) Rubber, raw－Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography－ Thermal desorption(dynamic headspace) method
KS I ISO 6145-5-2015(2020) Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6145-7-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS M ISO 17052-2012(2017) Rubber, raw－Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography－ Thermal desorption(dynamic headspace) method
KS I ISO 6145-4:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 4:Continuous syringe injection method
KS I ISO 6145-4-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-4:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 12884-2008(2018) Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
KS I ISO 16000-6-2014(2019) Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA® sorbent, thermal desorption and gas chromatography using MS or MS/FID

Japanese Industrial Standards Committee (JISC), dynamic gas adsorption

JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS Z 8830:2001 Determination of the specific surface area of powders (solids) by gas adsorption method
JIS R 1626:1996 Measuring methods for the specific surface area of fine ceramic powders by gas adsorption using the BET method
JIS Z 8831-3:2010 Pore size distribution and porosity of solid materials -- Part 3: Analysis of micropores by gas adsorption
JIS Z 8831-2:2010 Pore size distribution and porosity of solid materials -- Part 2: Analysis of mesopores and macropores by gas adsorption

Taiwan Provincial Standard of the People's Republic of China, dynamic gas adsorption

CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption

能源, dynamic gas adsorption

NB/T 10019-2015 Experimental method for multi-component gas isothermal adsorption of coal

Professional Standard - Energy, dynamic gas adsorption

NB/T 20143.6-2019 Nuclear Air and Gas Handling Code Process Gas Handling Part 6: Adsorbent Media
NB/T 20039.15-2012 Code on nuclear air and gas treatment.Ventilation, air conditioning and air cleaning.Part 15: Adsorbent media
NB/T 20039.12-2011 Code on nuclear air and gas treatment Ventilation,air conditioning and cleaning.Part 12:Iodine adsorber(type Ⅱ)
NB/T 20039.11-2011 Code on nuclear air and gas treatment Ventilation,air conditioning and cleaning.Part 11:Iodine adsorber(type Ⅰ)
NB/T 20039.13-2012 Code on nuclear air and gas treatment.Ventilation, air conditioning and air cleaning.Part 13: Iodine adsorbers(type III)

Professional Standard - Railway, dynamic gas adsorption

TB/T 3183-2007 Absorbent Compressed Air Dryer on Locomotive and Power Car

AENOR, dynamic gas adsorption

UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
UNE 77243-2:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 2: Volumetric pumps
UNE-EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
UNE-EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
UNE-EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
UNE-EN 15590:2012 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
UNE-EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
UNE-EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
UNE-EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
UNE-EN 15333-2:2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus

Indonesia Standards, dynamic gas adsorption

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption

American Society for Testing and Materials (ASTM), dynamic gas adsorption

ASTM D4222-03 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-98 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
ASTM D4597-03 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4597-03(2009)e1 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM E1413-00 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1413-00(2005) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1413-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
ASTM D3686-08 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-95(2001)e1 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-20 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-13 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D7569/D7569M-10(2015)e1 Standard Practice for Determination of Gas Content of Coal—Direct Desorption Method
ASTM D4597-10(2015) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4597-10(2021) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4597-97 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4597-10 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM F798-97 Standard Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region
ASTM F798-97(2002) Standard Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region
ASTM UOP821-81 Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer
ASTM D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
ASTM C1104/C1104M-95 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM C1104/C1104M-00 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM C1104/C1104M-19 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM D6209-98(2012) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D6209-13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D6209-21 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM E3338-22 Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
ASTM E3189-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
ASTM D6332-99(2005) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-99 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-12(2021) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-12 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-12(2017) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors

国家市场监督管理总局、中国国家标准化管理委员会, dynamic gas adsorption

GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation

NL-NEN, dynamic gas adsorption

NVN 2958-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2956-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2965-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous chlorinated hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NEN 2931-1993 Air quality. Workplace atmosphere. Determination of the concentration of vinylchloride by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2957-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by gas diffusive sampling with a dosemeter, liquid desorption and gas chromatography
NVN 2959-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by gas diffusive sampling with a dosemeter, thermal desorption and gas chromatography

ESDU - Engineering Sciences Data Unit, dynamic gas adsorption

ESDU 76021-1976 Dynamic viscosity of carbon dioxide gas and liquid.

Xinjiang Provincial Standard of the People's Republic of China, dynamic gas adsorption

DB65/T 3910-2016 Determination of total mercury in flue gas of coal-fired power plants Adsorption-pyrolysis atomic absorption spectrophotometry by activated carbon tube

CZ-CSN, dynamic gas adsorption

CSN ISO 7395:1993 Gas analysis. Preparation of calibration gas mixtures. Masss dynamic method
CSN ISO 6145-3:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3: Periodic injections into a flowing gas stream
CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
CSN ISO 6145/4:1993 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4: Continuous injection method

Association Francaise de Normalisation, dynamic gas adsorption

NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF X43-267:2014 Air des lieux de travail - Prélèvement et analyse de gaz et vapeurs organiques - Prélèvement par pompage sur tube à adsorption et désorption au solvant
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF ISO 16900-4:2012 Appareils de protection respiratoire - Méthodes et équipement d'essai - Partie 4 : détermination de la capacité d'un filtre à gaz et essais de migration, de désorption et dynamique au monoxyde de carbone
NF EN 15590:2011 Combustibles solides de récupération - Détermination du taux courant d'activité microbienne aérobie au moyen de l'indice de respiration dynamique
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X20-205-9*NF EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9 : saturation method
XP X43-341*XP CEN/TS 13649:2015 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling methode followed by solvent extraction or thermal desorption
XP CEN/TS 13649:2015 Émissions de sources fixes - Détermination de la concentration massique en composés organiques gazeux individuels - Échantillonnage par adsorption et extraction par solvant ou thermodésorption
NF S76-020-4*NF ISO 16900-4:2012 Respiratory protective devices - Methods of test and test equipment - Part 4 : determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing.
NF X20-205-8*NF EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 : diffusion method.
NF ISO 17420-4:2021 Appareils de protection respiratoire - Exigences de performances - Partie 4 : exigences pour les équipements de protection respiratoire alimentés en gaz respirable
NF X20-214:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3 : periodic injections into a flowing gas stream.
NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
NF X20-205-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6 : critical orifices.
NF X20-205-10*NF EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10 : permeation method
NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
NF X43-286:1997 Workplace atmospheres. Pumped sorbent tubes for the determination of gases and vapours. Requirements and test methods.
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF EN 13203-6:2022 Appareils domestiques produisant de l'eau chaude sanitaire utilisant les combustibles gazeux - Partie 6 : Evaluation de la consommation énergétique des pompes à chaleur à ad-sorption et ab-sorption
NF X20-205-11*NF EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11 : electrochemical generation.
NF X20-205-5*NF EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5 : capillary calibration devices
NF EN ISO 6145-8:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 8 : méthode par diffusion
NF EN ISO 6145-9:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 9 : méthode par saturation
NF EN ISO 6145-10:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 10 : méthode par perméation
NF X20-217:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 6 : sonic orifices.
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF E49-400:1992 Pneumatic fluid power. 8 bar cylinders. Mounting accessories. Fork yokes and tenons.
NF X20-215:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4 : continuous injection method.
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF ISO 17052:2007 Caoutchouc brut - Détermination des monomères résiduels et autres composés volatils de masse moléculaire faible par chromatographie en phase gazeuse sur colonne capillaire - Méthode par désorption thermique (espace de tête dynamique)
NF X20-205-4*NF EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4 : continuous syringe injection method.
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF EN ISO 6145-4:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 4 : méthode continue par seringue d'injection
NF EN ISO 6145-5:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 5 : dispositifs d'étalonnage par capillaires
NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.
NF ISO 16000-6:2021 Air intérieur - Partie 6 : dosage des composés organiques (COTV, COV, COSV) dans l'air intérieur et l'air de chambre d'essai par prélèvement actif sur tubes à sorbant, désorption thermique et chromatographie en phase gazeuse avec détection M...
NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
NF EN ISO 6145-6:2017 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 6 : orifices de débit critiques
NF T46-070*NF ISO 17052:2007 Rubber, raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method.
NF X34-230*NF EN 15590:2011 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
NF M88-800:1990 LIQUEFIED HYDROCARBONS SYSTEMS IN CONTAINERS. HEATING EQUIPMENT FOR ABSORPTION REFRIGERATORS USING LIQUEFIED PETROLEUM GAS FOR MOBILE OR SEMI-MOBILE VEHICLES. DESIGN. TESTS.
NF X43-404-6*NF ISO 16000-6:2021 Indoor air - Part 6 : determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID
NF S76-063-2*NF EN 15333-2:2011 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2 : free flow apparatus

Group Standards of the People's Republic of China, dynamic gas adsorption

T/CSEE 0284-2022 Technical conditions of hydrogen-cooled generator adsorption regenerative gas dryer
T/QGCML 1196-2023 99.5% purity pressure swing adsorption oxygen production and oxygen purification integrated system
T/SDAA 0054-2021 Technicol code of 12 kinds β-agonists residues in animal derived food — Enzyme-linked immunosorbent assay
T/CMES 38002-2022 Aerostatic Bearing Performance Test Methods Part 2 Dynamic Stiffness
T/EERT 012.2-2021 Technical guideline for synergistic treatment of volatile organic waste gas Part 2: Adsorption as the main body
T/CVMA 15-2020 Detection method of double-antigen sandwich enzyme-linked immunosorbent assay for novel coronavirus animal serum antibody

中华人民共和国国家卫生和计划生育委员会, dynamic gas adsorption

GB 12373-1990 Standard sampling device for liquid absorption method of gaseous pollutants in the atmosphere of residential areas

Guangxi Provincial Standard of the People's Republic of China, dynamic gas adsorption

DB45/T 1288-2016 Enzyme-linked immunosorbent assay for the detection of β-receptor agonists in feed

GM North America, dynamic gas adsorption

GM214M-2003 Engine Intake Manifold and Throttle Body Gaskets Revision B

SE-SIS, dynamic gas adsorption

SIS SEN 21 08 40-1969 Electrical apparatus for explosive gas atmospheres Additional requirements for electrical machines

European Committee for Standardization (CEN), dynamic gas adsorption

EN 1076:1997 Workplace Atmospheres - Pumped Sorbent Tubes for the Determination of Gases and Vapours - Requirements and Test Methods
PD CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption
EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
EN ISO 6145-9:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
EN 15333-2:2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus
EN 15590:2011 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index

IT-UNI, dynamic gas adsorption

UNI ISO 9932:2021 Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods

KR-KS, dynamic gas adsorption

KS M ISO 9932-2019 Paper and board－Determination of water vapour transmission rate of sheet materials－Dynamic sweep and static gas methods
KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method

Danish Standards Foundation, dynamic gas adsorption

DS/EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DS/EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
DS/EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
DS/EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN 15590:2012 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
DS/EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/EN 15333-2:2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus
DS/ISO 16000-6:2021 Indoor air – Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID

未注明发布机构, dynamic gas adsorption

BS 7591-2:1992(1999) Porosity and pore size distribution of materials — Part 2 : Method of evaluation by gas adsorption
BS EN ISO 6145-8:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8 : Diffusion method
BS EN ISO 6145-10:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10 : Permeation method
BS EN ISO 6145-11:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11 : Electrochemical generation
BS EN ISO 6145-4:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4 : Continuous syringe injection method

Standard Association of Australia （SAA）, dynamic gas adsorption

AS ISO 16900.4:2015 Respiratory protective devices — Methods of test and test equipment, Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing

International Federation of Trucks and Engines, dynamic gas adsorption

NAVISTAR CEMS A-40 SEC B-2014 VOID - Case Hardened Iron And Steel Parts - Aerated Salt Nitriding And Gaseous Ferritic Nitrocarburizing (Includes Appendix)

Universal Oil Products Company (UOP), dynamic gas adsorption

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

ES-UNE, dynamic gas adsorption

UNE-CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption (Endorsed by Asociación Española de Normalización in August...
UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-ISO 16000-6:2019 Indoor air. Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID

CEN - European Committee for Standardization, dynamic gas adsorption

EN 1911-2:1998 Stationary Source Emissions - Manual Method of Determination of HCI - Part 2: Gaseous Compounds Absorption
EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

Lithuanian Standards Office , dynamic gas adsorption

LST EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
LST EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
LST EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
LST EN 15590-2011 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
LST EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
LST EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
LST EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
LST EN 15333-2-2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus

IN-BIS, dynamic gas adsorption

IS 11578-1986

RU-GOST R, dynamic gas adsorption

GOST R ISO 12884-2007 Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
GOST R 55132-2012 Solid recovered fuels. Determination of potential rate of microbial self heating using the real dynamic respiration index
GOST R ISO 16200-1-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method
GOST R 12.4.270-2012 Occupational safety standards system. Insulating suits. Methods of pneumatic measuring definition integrity in dynamic conditions
GOST R ISO 16017-1-2007 Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/cappilary gas chromatography. Part 1. Pumped sampling

BE-NBN, dynamic gas adsorption

NBN T 96-202-1989 Work place atmospheres - Determination of formaldéhyde concentration - Method by derivatization with DNPH adsorbed on C 18 cartrigdes, désorption with acetonitrile and HPLC analysis

European Association of Aerospace Industries, dynamic gas adsorption

AECMA PREN 2672-1989 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines Issue P 1
AECMA PREN 2671-1988 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition; Outline and Terms Edition P 1
AECMA PREN 2673-1990 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition, Rigid Lines - Manufacture Edition P 1

American National Standards Institute （ANSI), dynamic gas adsorption

ANSI B93.95M-1987 Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance

PL-PKN, dynamic gas adsorption

PN M73321-1989 Hydraulic fluid power Positive displacement pumps, motors and integral transmissions Determination of steadystate performance

National Aeronautics and Space Administration (NASA), dynamic gas adsorption

NASA-TR-R-474-1977 Prediction of static aerodynamic characteristics for slender bodies alone and with lifting surfaces to very high angles of attack

Agricultural Standard of the People's Republic of China, dynamic gas adsorption

农业部1025号公告-3-2008 Determination of zeranol residues in animal derived food ELISA method for quick analysis and GC/MS method for connnnation

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, dynamic gas adsorption

GB/T 32948-2016 Detection of coproantigen of canidae infected Echinococcus granulosus（E.g）by sandwich enzyme-linked immunosorbent assay