ZH
RU
ES

Environmental thermal desorption instrument

Environmental thermal desorption instrument, Total:256 items.

In the international standard classification, Environmental thermal desorption instrument involves: Air quality, Ergonomics, Vocabularies, Pesticides and other agrochemicals, Environmental testing, Environmental protection, Wastes, Optical equipment, Optics and optical measurements, Radiation protection, Radiation measurements, Products of the chemical industry, Water quality, Electronic component assemblies, Welding, brazing and soldering, Tea. Coffee. Cocoa.

Danish Standards Foundation, Environmental thermal desorption instrument

DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
DS/EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
DS/EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
DS/EN ISO 11079:2008 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
DS/EN 60068-2-58:2005 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

Lithuanian Standards Office , Environmental thermal desorption instrument

LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
LST EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
LST EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)
LST EN 14662-2-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
LST EN 14662-5-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
LST EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
LST EN ISO 11079:2008 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007)
LST EN 60068-2-58+AC-2005 Environmental testing -- Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:2004)

AENOR, Environmental thermal desorption instrument

UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)
UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
UNE-EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)
UNE-EN 14662-2:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
UNE-EN 14662-5:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
UNE-EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
UNE-EN ISO 11079:2009 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007)
UNE-EN 60068-2-58:2006 Environmental testing -- Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

CZ-CSN, Environmental thermal desorption instrument

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities

RO-ASRO, Environmental thermal desorption instrument

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities

Association Francaise de Normalisation, Environmental thermal desorption instrument

NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
NF X35-202*NF EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities
FD X43-070-5:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 5 : Estimation of the uncertainties on measurements of benzene conducted in situ by pumping followed by a thermal desorption and
NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
NF EN ISO 7933:2005 Ergonomie des ambiances thermiques - Détermination analytique et interprétation de la contrainte thermique fondées sur le calcul de l'astreinte thermique prévisible
NF X43-029-1*NF EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : pumped sampling followed by thermal desorption and gas chromatography
NF EN 14662-4:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 4 : échantillonnage par diffusion suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
NF X43-029-4*NF EN 14662-4:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography
NF EN ISO 16017-1:2001 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 1 : échantillonnage par pompage
NF X43-510-1*NF EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1 : pumped sampling
NF X43-510-2*NF EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2 : diffusive sampling
NF EN ISO 16017-2:2003 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 2 : échantillonnage par diffu...
XP ISO/TS 20593:2017 Air ambiant - Détermination de la concentration en masse de particules provenant de l'usure des pneumatiques et des chaussées (TRWP) - Méthode par pyrolyse-CG/SM
NF EN ISO 7730:2006 Ergonomie des ambiances thermiques - Détermination analytique et interprétation du confort thermique par le calcul des indices PMV et PPD et par des critères de confort thermique local
NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
NF X35-203*NF EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
NF EN ISO 11079:2008 Ergonomie des ambiances thermiques - Détermination et interprétation de la contrainte liée au froid en utilisant l'isolement thermique requis du vêtement (IREQ) et les effets du refroidissement local
NF EN ISO 9408:1999 Qualité de l'eau - Évaluation, en milieu aqueux, de la biodégradabilité aérobie ultime des composés organiques par détermination de la demande en oxygène dans un respiromètre fermé.
NF EN ISO 15680:2004 Qualité de l'eau - Dosage par chromatographie en phase gazeuse d'un certain nombre d'hydrocarbures aromatiques monocycliques, du naphtalène et de divers composés chlorés par dégazage, piégeage et désorption thermique
FD X43-070-3:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 3 : Estimation of the uncertainties on measurements of benzene conducted in situ by diffusion tube followed by a thermal desorpt
NF C20-700-2-58/A1*NF EN 60068-2-58/A1:2018 Environmental testing - Part 2-58 : tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
NF C20-700-2-58*NF EN 60068-2-58:2015 Environmental testing - Part 2-58 : tests - Test Td : test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
NF EN 60068-2-58:2015 Essais d'environnement - Partie 2-58 : essais - Essai Td : méthodes d'essai de la soudabilité, résistance de la métallisation à la dissolution et résistance à la chaleur de brasage des composants pour montage en surface (CMS)
NF EN 60068-2-58/A1:2018 Essais d'environnement - Partie 2-58 : essais - Essai Td : méthodes d'essai de la soudabilité, résistance de la métallisation à la dissolution et résistance à la chaleur de brasage des composants pour montage en surface (CMS)

International Organization for Standardization (ISO), Environmental thermal desorption instrument

ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 7933:2023 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 9022-2:2002 Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity
ISO 16017-1:2000 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling
ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
ISO 9022-2:1994 Optics and optical instruments - Environmental test methods - Part 2: Cold, heat, humidity
ISO/DIS 7730 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 9022-18:1994 Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure
ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 9022-10:1994 Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration, dry heat or cold
ISO 9022-10:1998 Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold
ISO/TS 20593:2017 Ambient air - Determination of the mass concentration of tire and road wear particles (TRWP) - Pyrolysis-GC-MS method
ISO 23674:2022 Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
ISO 9022-13:1994 Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall, dry heat or cold
ISO 9022-15:1994 Optics and optical instruments - Environmental test methods - Part 15: Combined random vibration wide band; reproducibility medium, in dry heat oder cold
ISO 9022-16:1994 Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration, in dry heat or cold

European Committee for Standardization (CEN), Environmental thermal desorption instrument

EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
EN ISO 7933:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
FprEN ISO 7933 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
EN ISO 7726:2001 Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities ISO 7726:1998; Supersedes EN 27726:1993
EN 27726:1993 Thermal Environments - Instruments and Methods for Measuring Physical Quantities (ISO 7726 : 1985) Superseded by EN ISO 7726:2001
EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
prEN ISO 7730 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023)
EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
EN ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
prEN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)
HD 323.2.58 S1-1991 Basic environmental testing procedures; part 2: tests; test Td: solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 68-2-58:1989)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Environmental thermal desorption instrument

ASHRAE 3743-1994 Vapor Compression Cycle with Solution Circuit and Desorber/Absorber Heat Exchange
ASHRAE HI-02-5-2-2002 University Combined Heat and Power (CHP) Systems: Exploring Technical@ Financial@ and Environmental Solutions
ASHRAE AT-96-11-2-1996 Cogeneration and District Heating - the Solution for Energy Economy and a Cleaner Environment in Finland and Helsinki

Professional Standard - Environmental Protection, Environmental thermal desorption instrument

HJ 584-2010 Ambient air.Determination of benzene and its analogies by activated charcoal adsorption carbon disulfide desorption and gas chromatography
HJ 645-2013 Ambient air.Determination of volatile halogenated hydrocarbons.Activated charcoal adsorption and carbon disulfide desorption/gas chromatographic method
HJ 583-2010 Ambient air.Determination of benzene and its analogies using sorbent adsorption thermal desorption and gas chromatography
HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Environmental thermal desorption instrument

GB/T 31270.4-2014 Test guidelines on environmental safety assessment for chemical pesticides.Part 4: Adsorption/desorption in soils
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 16075-1995 Workplace air--Determination of ethylene oxide--Thermal desorption gas chromatographic method
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
GB/T 32710.9-2016 Safety requirements for environmental testing and conditioning equipment.Part 9:Electric heating incubators
GB/T 32710.10-2016 Safety requirements for environmental testing and conditioning equipment.Part 10: Electric gravity convection ovens and forced ventilation ovens
GB/T 32710.11-2016 Safety requirements for environmental testing and conditioning equipment.Part 11:Heat aging test chambers
GB/T 12085.18-2011 Optics and optical instruments.Enviromental test methods.Part 18: Combined damp heat and low internal pressure

British Standards Institution (BSI), Environmental thermal desorption instrument

BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling
BS ISO 9022-2:2002 Optics and optical instruments - Environmental test methods - Cold, heat and humidity
BS EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling
BS IEC 61577-4:2009 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
BS ISO 9022-18:1995 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7933:2023 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
23/30450169 DC BS EN ISO 7726. Ergonomics of the thermal environment. Instruments for measuring and monitoring physical quantities
18/30312137 DC BS EN ISO 7933. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
21/30436560 DC BS EN ISO 7933.2. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
22/30451002 DC BS EN 14662-1. Ambient air quality. Standard method for measurement of benzene concentrations. - Part 1. Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS EN ISO 7730:2005 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS IEC 61322:2020 Radiation protection instrumentation. Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV
23/30464386 DC BS EN ISO 7730. Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS 2011-2.1Td:1990 Environmental testing. Tests. Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
21/30387777 DC BS EN ISO 23674. Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition. Atomic absorption spectrometry (mercury analyzer)
22/30444882 DC BS EN 17813. Environmental matrices. Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods
BS EN ISO 15680:2003 Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
BS EN 60068-2-58:2015+A1:2018 Environmental testing - Tests. Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
18/30334766 DC BS IEC 61322. Radiation protection instrumentation. Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV

AT-ON, Environmental thermal desorption instrument

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
OENORM EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
OENORM EN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)

国家市场监督管理总局、中国国家标准化管理委员会, Environmental thermal desorption instrument

GB/T 40233-2021 Ergonomics of the thermal environment—Instruments for measuring physical quantities

未注明发布机构, Environmental thermal desorption instrument

BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities
BS EN 15251:2007(2008) Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
BS EN ISO 7730:2005(2006) Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS G 209:1970(2000) General requirements for electrical equipment and indicating instruments for aircraft . — Part 1 : Identification, declarations and construction ; — Part 2 : Environmental and operating conditions ; — Part 2 : Section 2 .

German Institute for Standardization, Environmental thermal desorption instrument

DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
DIN EN ISO 16017-1:2001 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000
DIN EN ISO 7933:2018 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
DIN EN ISO 7933:2021-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...
DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...
DIN ISO 9022-2:2003 Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2002)
DIN EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003); German version EN ISO 16017-2:2003
DIN EN ISO 7726:2023-08 Ergonomics of the thermal environment - Instruments for measuring and monitoring physical quantities (ISO/DIS 7726:2023); German and English version prEN ISO 7726:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN ISO 7726 (2021-03).
DIN EN ISO 16017-2:2003-09 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003); German version EN ISO 16017-2:2003
DIN EN ISO 16017-1:2001-10 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000
DIN EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN ISO 9022-18:2001 Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure (ISO 9022-18:1994)
DIN EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); English version of DIN EN ISO 7730:2006-05
DIN EN ISO 7730:2023-04 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023 / ...
DIN EN ISO 7730:2006-05 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005
DIN EN ISO 7730 Berichtigung 1:2007-06 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005, Corrigenda to DIN E...
DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN ISO 11079:2008-04 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007); German version EN ISO 11079:2007
DIN ISO 9022-21:2001 Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat (ISO 9022-21:1998)
DIN EN 17813:2022 Environmental matrices - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods; German and English version prEN 17813:2022
DIN EN ISO 7730:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023
DIN EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN ISO 15680:2004-04 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003); German version EN ISO 15680:2003
DIN EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
DIN EN ISO 7730 Berichtigung 1:2007 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005, Corrigenda to DIN EN I
DIN EN 17813:2022-02 Environmental matrices - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods; German and English version prEN 17813:2022 / Note: Date of issue 2022-01-14
DIN EN ISO 23674:2022-12 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022); German version EN ISO 23674:2022
DIN 10764-4:2007 Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 4: Method for soluble coffee and soluble coffee products by heating under atmospheric pressure (routine method)

Military Standard of the People's Republic of China-General Armament Department, Environmental thermal desorption instrument

GJB 595.5-1988 Environmental test methods for artillery optical instruments - damp heat test

BE-NBN, Environmental thermal desorption instrument

NBN X 10-002-1986 Specifications relating to the appliances and methods
NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

Group Standards of the People's Republic of China, Environmental thermal desorption instrument

T/LNEMA 005-2022 Determination of Monochloroethane in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Methanol - Gas Chromatography

Professional Standard - Urban Construction, Environmental thermal desorption instrument

CJ/T 20-1999 Specific equipments for municipal environmental sanitation.Incineration,gasification,pyrolysis of refuse

National Metrological Verification Regulations of the People's Republic of China, Environmental thermal desorption instrument

JJG 521-1988 Verification Regulation of X or γ Radiation Meters for Environmontal Monitoring Absorbed Dose Rate in Air
JJG 521-2006 X and Gamma Radiation Air Kerma Ratemeters for Environmental Monitoring

Beijing Provincial Standard of the People's Republic of China, Environmental thermal desorption instrument

DB11/T 1566-2018 Determination of Trimethylbenzene in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Carbon Disulfide-Gas Chromatography

Professional Standard - Ocean, Environmental thermal desorption instrument

HY 21.3-1992 The basic method of environmental test for oceanographic instruments - Guideline for damp/heat test

Korean Agency for Technology and Standards (KATS), Environmental thermal desorption instrument

KS B ISO 9022-21-2002(2022) Optics and optical instruments－Environmental test methods－Part 21：Combined low pressure and ambient temperature or dry heat
KS B ISO 9022-21-2002(2017) Optics and optical instruments－Environmental test methods－Part 21：Combined low pressure and ambient temperature or dry heat
KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
KS B ISO 9022-2:2003 Optics and optical instruments-Environmental test methods-Part 2:Cold, heat and humidity
KS B ISO 9022-2:2013 Optics and optical instruments ― Environmental test methods ― Part 2: Cold, heat, humidity
KS I ISO 16017-2:2005 Indoor, ambient and workplace air-Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography-Part 2:Diffusive sampling
KS I ISO 16017-1-2008(2018) Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling
KS B ISO 9022-10-2002(2017) Optics and optical instruments－Environmental test methods－Part 10：Combined sinusoidal vibration and dry heat or cold
KS I ISO 16017-1:2008 Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling
KS I ISO 16017-2:2020 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography —Part 2: Diffusive sampling
KS B ISO 9022-18-2002(2022) Optics and optical instruments－Environmental test methods－Part 18：Combined damp heat and low internal pressure
KS B ISO 9022-18-2002(2017) Optics and optical instruments－Environmental test methods－Part 18：Combined damp heat and low internal pressure
KS B ISO 9022-18:2002 Optics and optical instruments-Environmental test methods-Part 18:Combined damp heat and low internal pressure
KS A ISO 7730-2010(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
KS A ISO 7730:2010 Ergonomics of the thermal environment－Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
KS B ISO 9022-10-2002(2022) Optics and optical instruments－Environmental test methods－Part 10：Combined sinusoidal vibration and dry heat or cold
KS B ISO 9022-15-2002(2017) Optics and optical instruments－Environmental test methods－Part 15：Combined digitally controlled broad－band random vibration and dry heat or cold
KS B ISO 9022-21:2002 Optics and optical instruments－Environmental test methods－Part 21：Combined low pressure and ambient temperature or dry heat
KS I ISO 15680:2022 Water quality — Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
KS B ISO 9022-10:2002 Optics and optical instruments-Environmental test methods-Part 10:Combined sinusoidal vibration and dry heat or cold
KS B ISO 9022-15:2002 Optics and optical instruments－Environmental test methods－Part 15：Combined digitally controlled broad－band random vibration and dry heat or cold
KS B ISO 9022-16-2002(2017) Optics and optical instruments－Environmental test methods－Part 16：Combined bounce or steady－state acceleration and dry heat or cold
KS B ISO 9022-16-2002(2022) Optics and optical instruments－Environmental test methods－Part 16：Combined bounce or steady－state acceleration and dry heat or cold
KS B ISO 9022-13:2002 Optics and optical instruments－Environmental test methods－Part 13：Combined shock, bump or free fall and dry heat or cold
KS B ISO 9022-13-2002(2017) Optics and optical instruments－Environmental test methods－Part 13：Combined shock, bump or free fall and dry heat or cold
KS B ISO 9022-13-2002(2022) Optics and optical instruments－Environmental test methods－Part 13：Combined shock, bump or free fall and dry heat or cold
KS B ISO 9022-15-2002(2022) Optics and optical instruments－Environmental test methods－Part 15：Combined digitally controlled broad－band random vibration and dry heat or cold
KS C 0287-2002(2022) Environmental test－Tests－Test Td：Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting device(SMD)
KS B ISO 9022-16:2002 Optics and optical instruments－Environmental test methods－Part 16：Combined bounce or steady－state acceleration and dry heat or cold
KS C 0287-2002 Environmental test－Tests－Test Td：Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting device(SMD)
KS C 0287-2002(2017) Environmental test－Tests－Test Td：Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting device(SMD)
KS C IEC 60068-2-58-2007(2017) Environmental testing－Part 2－58：Tests－Test Td： Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices(SMD)
KS C IEC 60068-2-58-2007(2022) Environmental testing－Part 2－58：Tests－Test Td： Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices(SMD)

Professional Standard - Aviation, Environmental thermal desorption instrument

HB 7401-1996 Test method for moisture absorption of resin matrix composite laminates in hot and humid environment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Environmental thermal desorption instrument

GB/T 32065.7-2015 Environmental test methods for oceanographic instruments—Part 7：Damp heat, cyclic
GB/T 32065.6-2015 Environmental test methods for oceanographic instruments—Part 6：Damp heat, steady state
GB/T 18049-2017 Ergonomics of the thermal environment—Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

GOSTR, Environmental thermal desorption instrument

GOST R 57794-2017 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

Professional Standard - Education, Environmental thermal desorption instrument

JY 0213-1994 Environment specification of tronsterence tore and tert for the mechanics heat teaching instrumentr

Standard Association of Australia （SAA）, Environmental thermal desorption instrument

AS/NZS 3580.15:2014
AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method

International Electrotechnical Commission (IEC), Environmental thermal desorption instrument

IEC 61577-4:2009 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
IEC 60068-2-67:2019 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-58:2015+AMD1:2017 CSV Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

KR-KS, Environmental thermal desorption instrument

KS I ISO 16017-2-2020 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography —Part 2: Diffusive sampling
KS I ISO 15680-2022 Water quality — Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption

ES-UNE, Environmental thermal desorption instrument

UNE-EN ISO 16017-1:2002 ERRATUM Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Part 1: Pumped sampling. (ISO 16017-1:2000)
UNE-EN ISO 23674:2023 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
UNE-EN IEC 62321-3-3:2021 Determination of certain substances in electrotechnical products - Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption ac...
UNE-EN 60068-2-58:2015 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (Endorsed by AENOR in June of 2015.)
UNE-EN 60068-2-58:2015/A1:2018 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (Endorsed by Asociación Española de Normalización in May of 2018.)

NL-NEN, Environmental thermal desorption instrument

NEN 2931-1993 Air quality. Workplace atmosphere. Determination of the concentration of vinylchloride by active sorbent tube sampling, liquid desorption and gas chromatography

Professional Standard - Petroleum, Environmental thermal desorption instrument

SY/T 5421-1991 Basic environmental test methods for petroleum exploration and development instruments Test E: Constant damp heat test

Professional Standard - Agriculture, Environmental thermal desorption instrument

空气和废气监测分析方法 7.3.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 2 Sampling Instrument Selection

RU-GOST R, Environmental thermal desorption instrument

GOST R ISO 7730-2009 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

CEN - European Committee for Standardization, Environmental thermal desorption instrument

EN ISO 7730:1995 Moderate Thermal Environments - Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort
PREN 16798-1-2015 Energy performance of buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality@ thermal environment@ lighting and acoustics - Module M1-6

Taiwan Provincial Standard of the People's Republic of China, Environmental thermal desorption instrument

CNS 13086-1992 Basic Environmental Testing procedures Part 2: Test Td: Solderability.resistance to dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD)

YU-JUS, Environmental thermal desorption instrument

JUS N.A5.782-1994 Environmental testing - Test Td: Solderability resistance to dissolution of metallization and to soldering heat of surface mounting devices(SMD)

Association of German Mechanical Engineers, Environmental thermal desorption instrument

VDI 2100 Blatt 3-2011 Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption
VDI 2267 Blatt 1-1999 "Determination of suspended matters in ambient air - Measurement of As, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sb, Tl, Zn by atomic absorption spectrometry (AAS) after sampling on filters and digestion in an oxidizing acid mixture"

CENELEC - European Committee for Electrotechnical Standardization, Environmental thermal desorption instrument

EN 60068-2-58:2004 Environmental testing Part 2-58: Tests Test Td: Test methods for solderability@ resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
EN 60068-2-58:1999 Environmental Testing Part 2-58: Tests - Test Td: Test Methods for Solderability@ Resistance to Dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD)
EN 60068-2-58:2015 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability@ resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (Incorporates Amendment A1: 2018)

Japanese Industrial Standards Committee (JISC), Environmental thermal desorption instrument

JIS C 60068-2-58:2002 Environmental testing -- Part 2: Tests -- Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)