ZH
RU
ES

Atomic Emission Spectroscopy and X-ray Fluorescence

Atomic Emission Spectroscopy and X-ray Fluorescence, Total:498 items.

In the international standard classification, Atomic Emission Spectroscopy and X-ray Fluorescence involves: Analytical chemistry, Vocabularies, Non-ferrous metals, Power stations in general, Crude petroleum, Refractories, Ceramics, Non-metalliferous minerals, Paint ingredients, Edible oils and fats. Oilseeds, Petroleum products in general, Surface treatment and coating, Electronic components in general, Ferroalloys, Products of non-ferrous metals, Iron and steel products, Fertilizers, Ferrous metals, Metalliferous minerals, Optics and optical measurements, Fuels, Soil quality. Pedology, Non-destructive testing, Lubricants, industrial oils and related products, Wastes, Testing of metals, Nuclear energy engineering, Products of the textile industry, Inorganic chemicals, Medical equipment, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Linear and angular measurements, Coals, Air quality, Products of the chemical industry, Environmental protection, Materials and articles in contact with foodstuffs, Paints and varnishes, Powder metallurgy, Farming and forestry, Electrical engineering in general, Road vehicle systems, Animal feeding stuffs, Construction materials.


German Institute for Standardization, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
  • DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
  • DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
  • DIN 51418-2:2015-03 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
  • DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
  • DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
  • DIN EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • DIN 51418-2 Bb.1:2000 X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation
  • DIN EN ISO 14597:1999-03 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997); German version EN ISO 14597:1999
  • DIN EN ISO 21587-3:2007-12 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); German version EN ISO 21587-3:2007
  • DIN ISO 15597:2006 Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 15597:2001);English version of DIN ISO 15597:2006-01
  • DIN EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
  • DIN ISO 15597:2006-01 Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 15597:2001)
  • DIN EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); English version of DIN EN ISO 21587-3:2007-12
  • DIN 51001:2003 Testing of oxidic raw materials and basic materials - General bases of work for X-ray fluorescence method (XRF)
  • DIN 51001:2003-08 Testing of oxidic raw materials and basic materials - General bases of work for X-ray fluorescence method (XRF)
  • DIN EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coup
  • DIN 51829:2013-03 Petroleum products - Determination of additive and wear elements in greases - Analysis by wavelength dispersive X-ray fluorescence spectrometry
  • DIN EN 15063-2:2007-01 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method; German version EN 15063-2:2006
  • DIN EN 15063-2:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method; English version of DIN EN 15063-2:2007-01
  • DIN EN 15063-1:2015-03 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method; German version EN 15063-1:2014
  • DIN EN ISO 16371-2:2019-04 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017, Corrected version 2018-05); German version EN I...
  • DIN EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); English version of DIN EN ISO 26845:20
  • DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008
  • DIN EN 15063-1:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method; English version of DIN EN 15063-1:2007-01
  • DIN V ENV 14138:2002 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation; German version ENV 14138:2001
  • DIN EN ISO 16371-2:2018 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017)

Korean Agency for Technology and Standards (KATS), Atomic Emission Spectroscopy and X-ray Fluorescence

  • KS M ISO 6955:2011 Analytical spectroscopic methods-Flame emission,atomic absorption, and atomic fluorescence-Vocabulary
  • KS M ISO 6955-2016(2021) Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
  • KS M ISO 6955:2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
  • KS D 2597-1996 Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
  • KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
  • KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
  • KS L ISO 20565-3-2012(2017) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
  • KS L ISO 20565-3-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
  • KS L 3316-2009 Method for X-ray fluorescence spectrometric analysis of refractory brikcs and refractory mortars
  • KS E 3075-2017 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
  • KS E 3075-2022 Method for X-ray fluorescence spectrometric analysis of limestone and dolomite
  • KS L ISO 10058-3-2012(2022) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
  • KS L ISO 20565-3:2012 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)-Part 3:Flame atomic absorption spectrometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
  • KS L ISO 10058-3:2012 Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
  • KS D 2597-1996(2016) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
  • KS M ISO 15597:2003 Petroleum and related products－Determination of chlorine and bromine content－Wavelength－dispersive X－ray fluorescence spectrometry
  • KS L ISO 10058-3-2012(2017) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
  • KS M ISO 14597-2003(2018)
  • KS M ISO 15597-2003(2018)
  • KS L ISO 21079-3-2012(2022) Chemical analysis of refractories containing alumina, zirconia, and silica－Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spec
  • KS L ISO 21587-3:2012 Chemical analysis of aluminosilicate refractory products-Part 3:Inductively coupled plasma and atomic absorption spectrometry methods
  • KS L ISO 21079-3-2012(2017) Chemical analysis of refractories containing alumina, zirconia, and silica－Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spec
  • KS D 1658-2003 Emission-spectroscopic analysis for carbon steel and low alloy steel
  • KS M ISO 5938:2003 Cryolite, natural and artificial, and aluminium fluoride for industrial use－Determination of sulphur content－X-ray fluorescence spectrometric method
  • KS E ISO 9516:2010 Iron ores－Determination of silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorus, sulfur and potassium－Wavelength dispersive X-ray fluorescence spectrometric method
  • KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS L ISO 21079-3:2012 Chemical analysis of refractories containing alumina, zirconia, and silica－Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively coupled plasma atomic em
  • KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS E ISO 4571-2001(2016) Manganese ores and concentrates- Determination of sodium and potassium content - Flame atomic emission spectrometric method
  • KS M ISO 5938-2003(2018)
  • KS M ISO 12980:2004 Carbonaceous materials used in the production of aluminium-Green coke and calcined coke for electrodes-Analysis using an X-ray fluorescence method
  • KS M ISO 12980:2013 Carbonaceous materials used in the production of aluminium－Green coke and calcined coke for electrodes－Analysis using an X-ray fluorescence method
  • KS D ISO 22962:2010 Titanium and titanium alloys－Determination of iron－Inductively coupled plasma atomic emission spectrometry
  • KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
  • KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
  • KS E ISO 4571:2001 Manganese ores and concentrates－Determination of sodium and potassium content－Flame atomic emission spectrometric method
  • KS E ISO 4571-2001(2021) Manganese ores and concentrates- Determination of sodium and potassium content - Flame atomic emission spectrometric method
  • KS L ISO 26845:2012 Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
  • KS C IEC 62321-3-1-2014(2019) Determination of certain substances in electrotechnical products — Part 3-1: Screening — Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
  • KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
  • KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • KS L ISO 20565-2-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 2：Wet chemical analysis

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • GB/T 4470-1998 Analytical spectroscopic methods-Flame emission,atomic absorption and atomic fluorescence-Vocabulary
  • GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
  • GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
  • GB/T 7731.7-2008 Ferrotungsten. Determination of tin content. Phenylfluorone photometric method and inductively coupled plasma-atomic emission spectrometry
  • GB/T 17416.2-1998 Method for chemical analysis of Zirconium ores.Determination of Zirconium and Hafnium contents.X-ray fluorescence spectrometric method
  • GB/Z 21277-2007 Rapid screening of lead,mercury,chromium,cadmium and bromine of regulated substances in electrical and electronic equipment.X-ray fluorescence spectrometry
  • GB/T 17040-2008 Standard test method for sulfur in petrolem and petroleum products by energy dispersive X-ray fluorescence spectrometry
  • GB/T 6730.62-2005 Iron ores-Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content Wavelength dispersive X-ray fluorescence spectrometric method
  • GB/T 24198-2009 Ferronickel.Determination of nickel,silicon,phosphorus,manganese,cobalt,chromium,and copper contents.Wavelength dispersive X-ray fluorescence spectrometry(Routine method)
  • GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
  • GB/T 24231-2009 Chrome ores.Determination of magnesium,aluminum,silicon,calcium,titanium,vanadium,chrome,manganese,iron and nickel content.Wavelength dispersive X-ray fluorescence spectrometric method
  • GB/T 4324.15-2008 Methods for chemical analysis of tungsten.Determination of magnesium content.The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
  • GB/T 28632-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution
  • GB/T 7731.6-2008 Ferrotungsten.Determination of arsenic content.The molybdenum blue photometrie method and inductively coupled plasma-atomic emission spectrometry
  • GB/T 7731.14-2008 Ferrotungsten. Determination of lead content. The polarographic method and inductively coupled plasma-atomic emission spectrometry
  • GB/T 30701-2014 Surface chemical analysis.Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
  • GB/T 7731.9-2008 Ferrotungsten.Determination of bismuth content.The bismuth iodide photonmetric method and inductively coupled plasma-atomic emission spectrometry
  • GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • GB/T 32179-2015 Chemical analysis of refractories.General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods
  • GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
  • GB/T 7731.8-2008 Ferrotungsten.Determination of antimony content.The tetraethlrhodamine photometrie method and inductively couple plasma-atomic mission spectrometry
  • GB/T 28633-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
  • GB/T 13370-1992 Determination of lithium,sodium,potassium and cesium in uranium dioxide dioxide powders and pellets by atomic absorption spectrophotometry/flame emission spectrophotometry
  • GB/T 24519-2009 Manganese ores-Determination of magnesium,aluminum,silicon,phophorus,sulfur,potassium,calcium,titanium,manganese,iron，nickel,copper,zinc,barium and lead content-Wavelength,dispersive X-ray fluorescence spectrometric method
  • GB/T 4336-2002 Standard test method for spark discharge atomic emission Spectrometric analysis of carbon and low-Alloy steel(Routine Method)
  • GB/T 11066.5-2008 Methods for chemical analysis of gold.Determination of silver, copper, iron, lead , antimony and bismuth contents.Atomic emission spectrometry
  • GB/T 4324.8-2008 Methods for chemical analysis of tungsten.Determination of nickel content.The inductively coupled plasma atomic emission spectrometry、flame atomic absorption spectrometry and dimethylglyoxime gravimetry
  • GB/T 42794-2023 Determination of nickel iron carbon, sulfur, silicon, phosphorus, nickel, cobalt, chromium and copper content by spark source atomic emission spectrometry
  • GB/T 6609.30-2009 Chemical analysis methods and determination of physical performance of alumina.Part 30:X-ray fluorescence spectrometric method for the determination content of trace elements
  • GB/T 31926-2015 Zinc and aluminum based coatings on steel sheets and strips.Determination of lead,cadmium and chromium contens.Glow discharge atomic emission spectrometry method
  • GB/T 13747.9-2022 Methods for chemical analysis of zirconium and zirconium alloys—Part 9：Determination of magnesium content—Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectromet
  • GB/T 18882.2-2002 Chemical analysis methods for mixed rare earth oxide of ion-absorpted type RE ore-Determination of fifteen REO relative content--X-ray fluorescence spectrometric method
  • GB/T 11067.3-2006 Methods for chemical analysis of silver. Determination of selenium and tellurium content. Inductively coupled plasma atomic emission spectrometric method
  • GB/T 24585-2009 Ferronickel.Determination of phosphorus， manganese，chromium，copper，cobalt and silicon contents.Inductively coupled plasma atomic emission spectrometric method
  • GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction
  • GB/T 4325.11-2013 Methods for chemical analysis of molybdenum.Part 11:Determination of aluminum content.Chromazurol S spectrophotometry and inductively coupled plasma atomic emission spectrometry
  • GB/T 4325.18-2013 Methods for chemical analysis of molybdenum.Part 18:Determination of vanadium content.N-benzoyl-N-phenylhydroxylamine spectrophotometry and inductively coupled plasma atomic emission spectrometry
  • GB/T 24520-2009 Cast iron and low alloy steel-Determination of lanthanum,cerium and magnesium content-Inductively coupled plasma atomic emission spectrometric method
  • GB/T 1871.5-2022 Determination of magnesium oxide content for phosphate rock and concentrate—Flame atomic absorption spectrometry，volumetry and inductively coupled plasma optical emission spectrometry

KR-KS, Atomic Emission Spectroscopy and X-ray Fluorescence

Association Francaise de Normalisation, Atomic Emission Spectroscopy and X-ray Fluorescence

  • T01-040:1982 Analytical spectroscopic methods. Flame emission, atomic absorption and atomic fluorescence. Vocabulary.
  • NF EN ISO 21587-3:2007 Analyse chimique des produits réfractaires d'aluminosilicates (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique (AAS) et spectrométrie d'émission atomique avec plasm...
  • NF B49-329-3*NF EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • NF B49-435-3*NF EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP
  • NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
  • NF EN ISO 14597:1999 Produits pétroliers - Dosage du vanadium et du nickel - Spectrométrie de fluorescence X dispersive en longueur d'onde.
  • NF V03-918-2:1997 Rapeseed. Determination of glucosinolates content. Part 2 : method using X-ray fluorescence spectrometry.
  • NF EN ISO 20565-3:2009 Analyse chimique des produits réfractaires contenant du chrome et des matières premières contenant du chrome (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique dans la ...
  • NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
  • NF B40-670-3*NF EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3 : inductively coupled plasma and atomic absorption spectrometry methods
  • NF B49-424-3*NF EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrophotometry (FAAS) and inductively coupled pla
  • FD A06-326*FD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al in ferro-silicon by X-ray fluorescence spectrometry
  • NF X21-073*NF ISO 16243:2012 Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS).
  • NF ISO 16243:2012 Analyse chimique des surfaces - Enregistrement et notification des données en spectroscopie de photoélectrons par rayons X (XPS)
  • NF A08-701-2*NF EN 15063-2:2006 Copper and copper alloys - Determination of main constituents and impurities by wavelenght dispersive X-ray fluorescence spectrometry (XRF) - Part 2 : routine method.
  • NF EN 15063-2:2006 Cuivre et alliages de cuivre - Détermination des éléments principaux et des impuretés par analyse spectrométrique de fluorescence X à dispersion en longueur d'onde (XRF) - Partie 2 : méthode de routine
  • NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
  • NF A08-701-1:2006 Copper and copper alloys - Determination of main constituents and impurities by wavelenght dispersive X-ray fluorescence spectrometry (XRF) - Part 1 : guidelines to the routine method.
  • NF A08-701-1*NF EN 15063-1:2015 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1 : guidelines to the routine method
  • NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
  • NF A09-253-2*NF EN ISO 16371-2:2017 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2 : General principles for testing of metallic materials using X-rays and gamma rays
  • NF S57-037-4*NF ISO 22863-4:2021 Fireworks - Test methods for determination of specific chemical substances - Part 4 : analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
  • NF A09-230-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3 : spectrometric method.
  • NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
  • NF EN ISO 20884/A1:2021 Produits pétroliers - Détermination de la teneur en soufre des carburants pour automobiles - Spectrométrie de fluorescence de rayons X dispersive en longueur d'onde - Amendement 1 : ajout du détecteur SSD à la partie Excitation monochromatique du...
  • NF EN 15063-1:2015 Cuivre et alliages de cuivre - Détermination des éléments principaux et des impuretés par analyse spectrométrique de fluorescence X à dispersion de longueur d'onde (FRX) - Partie 1 : lignes directrices pour la méthode de routine
  • NF B40-672*NF EN ISO 26845:2008 Chemical analysis of refractories . General requirements for wet chemicals analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
  • NF EN 62321-3-1:2014 Détermination de certaines substances dans les produits électrotechniques - Partie 3-1 : méthodes d'essai - Plomb, du mercure, du cadmium, du chrome total et du brome total par la spectrométrie par fluorescence X

Professional Standard - Electricity, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DL/T 1151.22-2012 Analytical methods of scale and corrosion products in power plants.Part 22: standard test methods of X-ray fluorescence spectrometry and X-ray diffraction

Japanese Industrial Standards Committee (JISC), Atomic Emission Spectroscopy and X-ray Fluorescence

  • JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
  • JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
  • JIS R 2216:1995 Method for X-ray fluorescence spectrometric analysis of refractory bricks and refractory mortars
  • JIS K 0470:2008 Determination of arsenic and lead in clay and sand using energy-dispersive X-ray fluorescence spectrometry
  • JIS H 1288:2015 Nickel and nickel alloys -- Methods for spark discharge atomic emission spectrometric analysis
  • JIS H 1322:2017 Magnesium and magnesium alloys -- Method for spark discharge atomic emission spectrometric analysis
  • JIS H 1289:2015 Nickel and nickel alloys -- ICP atomic emission spectrometric method -- Determination of niobium, tantalum and zirconium
  • JIS G 1258 AMD 2:2005 Iron and steel -- Methods for inductively coupled plasma atomic emission spectrometry (Amendment 2)
  • JIS K 2541-4:2003 Crude oil and petroleum products -- Determination of sulfur content Part 4: Energy-dispersive X-ray fluorescence method
  • JIS K 2541-7:2003 Crude oil and petroleum products -- Determination of sulfur content Part 7: Wavelength-dispersive X-ray fluorescence method
  • JIS K 1200-6:2000 Sodium hydroxide for industrial use -- Part 6: Determination of iron content -- Atomic absorption spectrometry and inductively coupled plasma atomic emission spectrophotometry
  • JIS G 1258-0:2007 Iron and steel -- ICP atomic emission spectrometric method -- Part 0: General rules
  • JIS K 0152:2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
  • JIS K 1201-5:2000 Sodium carbonate for industrial use -- Part 5: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Atomic absorption spectrometry, and inductively coupled plasma atomic emission spectrometry
  • JIS K 1310-3:2000 Hydrochloric acid for industrial use -- Part 3: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Electrothermal type atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry
  • JIS G 1258-8:2017 Iron and steel -- ICP atomic emission spectrometric method -- Part 8: Determination of tungsten content -- Decomposition with phosphoric and sulfuric acids

BELST, Atomic Emission Spectroscopy and X-ray Fluorescence

  • STB 1935-2009 Grude oil. Determination of organic chloride content by method of wavedispersion X-ray fluorescence spectrometry

British Standards Institution (BSI), Atomic Emission Spectroscopy and X-ray Fluorescence

  • BS EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • BS EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-A
  • BS EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • BS EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
  • BS PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
  • BS EN ISO 14597:1999 Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
  • BS EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Inductively coupled plasma and atomic absorption spectrometry methods
  • BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
  • BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • BS EN 15485:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
  • BS EN ISO 21079-3:2009 Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled pl
  • BS EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Part 3: Flame atomic absorption spectrophotometry (FAAS) and ind
  • BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
  • BS ISO 22863-4:2021 Fireworks. Test methods for determination of specific chemical substances. Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
  • BS ISO 15597:2001 Methods of test for petroleum and its products. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry
  • BS ISO 13933:2014 Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method
  • BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
  • BS ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
  • BS 6043-2.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy
  • BS EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - General principles for testing of metallic materials using X-rays and gamma rays
  • BS ISO 22962:2008 Titanium and titanium alloys - Determination of iron - Inductively coupled plasma atomic emission spectrometry
  • BS EN 15063-2:2006 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Routine method
  • 23/30409204 DC BS EN IEC 62321-3-1. DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - Part 3-1. Elemental Screening by X-ray fluorescence spectrometry
  • BS ISO 16243:2011 Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
  • BS EN 15063-1:2006 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Guidelines to the routine method
  • BS ISO 15597:2004 Methods of test for petroleum and its products - BS 2000-503: Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry
  • BS EN 15063-1:2014 Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF). Guidelines to the routine method
  • BS EN ISO 16371-2:2017 Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. General principles for testing of metallic materials using X-rays and gamma rays
  • BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
  • DD ENV 14029-2001 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
  • BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
  • BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
  • BS ISO 21339:2023 6Al-4V titanium alloys. Determination of aluminium and vanadium contents. Inductively coupled plasma atomic emission spectrometric method
  • BS EN 62321-3-1:2014 Determination of certain substances in electrotechnical products. Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
  • BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
  • BS ISO 13605:2018 Tracked Changes. Solid mineral fuels. Major and minor elements in coal ash and coke ash. Wavelength dispersive x-ray fluorescence spectrometric method
  • BS ISO 17109:2022 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter dept profiling using single and multi-layer thin…
  • 21/30433862 DC BS ISO 17109 AMD1. Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and…

Danish Standards Foundation, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DS/EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • DS/EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • DS/EN ISO 14597:1999 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray flourescence spectrometry
  • DS/EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
  • DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
  • DS/EN 15063-2:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
  • DS/ISO/TS 13605:2012 Solid mineral fuels - Major and minor elements in hard coal ash and coke ash - Wavelength dispersive X-ray fluorescence spectrometric method
  • DS/EN 15063-1:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
  • DS/EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
  • DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
  • DS/ISO 20884:2021 Petroleum products – Determination of sulfur content of automotive fuels – Wavelength-dispersive X-ray fluorescence spectrometry – Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1

Lithuanian Standards Office , Atomic Emission Spectroscopy and X-ray Fluorescence

  • LST EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • LST EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
  • LST EN ISO 14597:2000 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997)
  • LST EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)
  • LST EN 15063-2-2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
  • LST EN 15063-1-2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
  • LST EN 14784-2-2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
  • LST EN 62321-4-2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013)
  • LST EN 62321-5-2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013)

International Organization for Standardization (ISO), Atomic Emission Spectroscopy and X-ray Fluorescence

  • ISO 6955:1982 Analytical spectroscopic methods; Flame emission, atomic absorption, and atomic fluorescence; Vocabulary Bilingual edition
  • ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • ISO 9167-2:1994 Rapeseed - Determination of glucosinolates content - Part 2: Method using x-ray fluorescence spectrometry
  • ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • ISO 15597:2001 Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry
  • ISO/TS 18507:2015 Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
  • ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
  • ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
  • ISO 9516:1992 Iron ores; determination of silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorus, sulfur and potassium; wavelength dispersive X-ray fluorescence spectrometric method
  • ISO 5938:1979 Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of sulphur content; X-ray fluorescence spectrometric method
  • ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
  • ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
  • ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively cou
  • ISO 13933:2014 Steel and iron - Determination of calcium and magnesium - Inductively coupled plasma atomic emission spectrometric method
  • ISO 22962:2008 Titanium and titanium alloys - Determination of iron - Inductively coupled plasma atomic emission spectrometry
  • ISO 16243:2011 Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
  • ISO 4571:1981 Manganese ores and concentrates; Determination of potassium and sodium content; Flame atomic emission spectrometric method
  • ISO 16371-2:2017 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
  • ISO 22863-4:2021 Fireworks - Test methods for determination of specific chemical substances - Part 4: Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
  • ISO 21339:2023 6Al-4V titanium alloys — Determination of aluminium and vanadium contents — Inductively coupled plasma atomic emission spectrometric method
  • ISO/TS 13605:2012 Solid mineral fuels - Major and minor elements in hard coal ash and coke ash - Wavelength dispersive X-ray fluorescence spectrometric method
  • ISO 13605:2018 Solid mineral fuels - Major and minor elements in coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method
  • ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
  • ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO 17109:2022 Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth p
  • ISO 20884:2019/Amd 1:2021 Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry — Amendment 1: Addition of the SSD detector to the Monochromatic excita
  • ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results

European Committee for Standardization (CEN), Atomic Emission Spectroscopy and X-ray Fluorescence

  • EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • EN ISO 9167-2:1997 Rapeseed - Determination of Glucosinolates Content - Part 2: Method Using X-Ray Fluorescence Spectrometry
  • EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
  • EN ISO 14597:1999 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997)
  • CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
  • PD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
  • EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively
  • EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
  • EN ISO 16371-2:2017 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
  • EN 15063-2:2006 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
  • EN 15063-1:2006 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method

Group Standards of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • T/CGWSTC 001-2022 Determination of various components in ceramic raw materials X-ray fluorescence spectrometry (powder compression)
  • T/CEC 423-2020 Determination of Sulfur, Phosphorus and Chlorine Content in Mineral Insulating Oils and Lubricating Oils Energy-dispersive X-ray Fluorescence Spectrometry
  • T/CSTM 00756-2021 Iron ores—Determination of sodium and potassium contents— Flame atomic emission spectrometric method
  • T/FJEMIA 6-2022 Rapid screening of copper, zinc, lead, nickel, chromium and arsenic in soil by portable energy dispersive X-ray fluorescence spectrometry
  • T/JSSES 29-2023 Soil quality Determination of total soil silicon, aluminum, iron, potassium, sodium, calcium, magnesium, manganese, phosphorus, titanium, sulfur Single wavelength excitation-energy dispersive X-ray fluorescence spectrometry

Professional Standard - Commodity Inspection, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SN/T 3810-2014 Determination of nitrogen content in urea and ammonium sulphate.X-ray fluorescence spectrometry
  • SN/T 3809-2014 Determination of potassium content in potassium chloride and potassium sulphate.X-ray fluorescence spectrometry
  • SN/T 2697-2010 Determination of sulfur,phosphorus,arsenic and chloride in coal for import and export.X-ray fluorescence spectrometric method
  • SN/T 0509-1995 Determination of sulfur content in petroleum and petroleum products by X-ray fluorescence spectroscopy method
  • SN/T 2696-2010 Determination of major and minor elements in coal ash and coke ash.X-ray fluorescence spectrometric method
  • SN/T 3187-2012 Determination of sodium,magnesium,aluminium,silicon,calcium,vanadium,iron,nickel,copper,lead,arsenic in crude oil.Wavelength dispersive X-ray fluorescence spectrometry
  • SN/T 2003.3-2006 Determination of Lead, Mercury, Chromium, Cadmium and Bromine in electrical and electronic equipments - Part 3: Qualitative screening by X-ray fluorescence spectrometric method
  • SN/T 2003.1-2005 Determination of lead,mercury,cadmium,chromium and bromine in electrical and electronic equipment-Part 1:Qualitative screening by wavelength dispersive X-ray fluorescence spectrometric method
  • SN/T 2749-2010 Determination of manganese,silicon,aluminum,calcium,titanium in rare earth ferrosilicon.Wave dispersive X-ray fluorescence spectrometry method
  • SN/T 2003.4-2006 Determination of lead, mercury, chromium, cadmium and bromine in electrical and electronic equipment. Part 4: Qualitative screening by energy dispersive X-ray fluorescence spectrometric method
  • SN/T 2003.5-2006 Determination of lead,mercury,chromium,cadmium and bromine in electrical and electronic equipment-Part 5:Quantitative screening by energy dispersive X-ray fluorescence spectrometric method
  • SN/T 0832-1999 Determination of iron,silicon,calcium,manganese,aluminium,titanium,magnesium and phosphorus in iron ores for import and export.Wavelength dispersive X-ray fluorescence spectrometric method
  • SN/T 3323.5-2012 Mill scale.Part 5:Determination of iron and silicon, calcium, phosphorus,manganese, aluminium, titanium and magnesium.X-ray fluorescence spectrometric method
  • SN/T 3816-2014 Screening of cobalt,arsenic,chromium,tin,bromine and lead in rubber products.Energy dispersive X-ray fluorescence spectrometric method
  • SN/T 1504.5-2005 Plastics used for food container and package - Part 5: Determination of elemental content in polyolefins - X ray fluorescence spectrometry
  • SN/T 2638.1-2010 Determination of manganese,iron,silicon,aluminum,calcium,magnesium,titanium,potassium and phosphorus in manganese ores for import and export.Wavelength dispersive X-ray fluorescence spectrometric method
  • SN/T 3321.3-2015 Analysis method of limestone and dolomite.Part 3:Determination of primary and secondary component content.Wavelength dispersive X-ray fluorescence spectrometric method
  • SN/T 4024-2013 Determination of sodium, potassium and vanadium content in coal tar oil and anthracene oil.Inductively coupled plasma atomic emission spectrometry
  • SN/T 2186-2008 Determination of soluble lead,cadmium,chromium and mercury in paints.Inductively coupled plasma atomic emission spectrometry
  • SN/T 3708-2013 Determination of silicon and phosphorus content in ferrochromium.Microwave digestion-inductively coupled plasma atomic emission spectrometric method

American Society for Testing and Materials (ASTM), Atomic Emission Spectroscopy and X-ray Fluorescence

  • ASTM D5381-93(2021) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
  • ASTM D5381-93(2014) Standard Guide for X-Ray Fluorescence 40;XRF41; Spectroscopy of Pigments and Extenders
  • ASTM D5381-93(2009) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
  • ASTM E322-96e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
  • ASTM E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
  • ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
  • ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM D5839-96(2001) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • ASTM D5839-96(2006) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • ASTM E995-04 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
  • ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E2465-06 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
  • ASTM E572-02a(2006)e2 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
  • ASTM E322-96(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
  • ASTM D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM B890-02 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM C1255-93(1999) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM B890-98 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM C1255-18 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM C1255-93(2005) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM C1255-11 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D5839-15 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • ASTM E572-12 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM E322-12 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • ASTM E572-13 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • ASTM B890-07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
  • ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
  • ASTM E572-21 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • ASTM E1251-17a Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
  • ASTM C1508-01(2006) Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM C1508-01 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM C1508-18 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM E996-10(2018) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E996-19 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM E1832-08 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
  • ASTM E1832-08(2017) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
  • ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
  • ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM D8252-19 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
  • ASTM D8252-19e1 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
  • ASTM D6481-14(2019) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
  • ASTM D6481-14 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
  • ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM E1251-07 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
  • ASTM B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
  • ASTM B954-23 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
  • ASTM B954-15 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
  • ASTM D7039-07 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D6481-99(2004) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
  • ASTM D6481-99 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
  • ASTM D7757-22 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM B890-20 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM F2853-10 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
  • ASTM D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
  • ASTM D8064-16 Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
  • ASTM C1508-01(2011) Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM E415-21 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
  • ASTM D7039-04 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4294-16 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4294-16e1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM E995-11 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
  • ASTM D7343-07 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM E1523-03 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
  • ASTM E1251-17 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
  • ASTM D5184-00 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D7220-12(2017) Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7757-17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM E1523-97 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
  • ASTM E1523-09 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
  • ASTM E1523-15 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
  • ASTM E1251-11 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
  • ASTM F3078-15 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
  • ASTM D7343-12 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM F3078-15(2023) Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
  • ASTM D5185-18 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma At
  • ASTM F2853-10(2023) Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monoch
  • ASTM E634-12 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
  • ASTM E415-17 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
  • ASTM E634-18 Standard Practice for Sampling of Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry
  • ASTM E634-23 Standard Practice for Sampling Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry
  • ASTM D3605-00(2011) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM D6357-19 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D6357-21 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D7220-22 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM E415-14 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
  • ASTM E415-15 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
  • ASTM E1552-08 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasmax2014;Atomic Emission Spectrometry

Professional Standard - Non-ferrous Metal, Atomic Emission Spectroscopy and X-ray Fluorescence

  • YS/T 739-2010 Determination of cryolite rate and main components of electrolyte-X-ray fluorescence spectrometric analysis method
  • YS/T 273.14-2008 Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
  • YS/T 581.10-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 10:Determination of sulphur content by X-ray fluorescence spectrometric method
  • YS/T 273.11-2006 Chemical analysis methods and physical properties of cryolite. Part 11:Determination of sulphur content by X-ray fluorescence spectrometric method
  • YS/T 581.16-2008 Chemical analysis methods and determination of physical performance of industrial aluminium fluoride.Part 16: X-ray fluorescence spectrometric method for the determination of elements content
  • YS/T 820.19-2012 Methods for chemical analysis of laterite nickel ores.Part 19:Determination of aluminum,chromium,iron,magnesium,manganese,nickel and silicon contents.Energy-dispersive X-ray fluorescence spectrometry

未注明发布机构, Atomic Emission Spectroscopy and X-ray Fluorescence

  • BS EN ISO 9167-2:1997(1999) Rapeseed — Determination of glucosinolates content — Part 2 : Method using X - ray fluorescence spectrometry
  • BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
  • BS ISO 15597:2001(2004)*BS 2000-503:2004 Methods of test for Petroleum and its products — BS 2000 - 503 : Determination of chlorine and bromine content — Wavelength - dispersive X - ray fluorescence spectrometry
  • BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution
  • BS EN ISO 16371-2:2017(2018) Non - destructive testing – Industrial computed radiography with storage phosphor imaging plates Part 2 : General principles for testing of metallic materials using X - rays and gamma rays
  • BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods

BR-ABNT, Atomic Emission Spectroscopy and X-ray Fluorescence

  • ABNT NBR 14533-2011 Petroleum and petroleum products - Determination of sulfur spectrometry X-ray fluorescence (energy dispersive)

Professional Standard - Electron, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SJ 20147.1-1992 Measurement methods for electrodeposited silver and silver alloy coating thickness--Method by the X-ray fluorescent spectromentry
  • SJ/T 10458-1993 Standard guide for specimen handling in auger electron spectroscopy and X-ray photoelectron spectroscopy

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Atomic Emission Spectroscopy and X-ray Fluorescence

  • GB/T 33352-2016 General rules of screening application of restricted substances in electrical and electronic products—X-Ray fluorescence spectrometry
  • GB/T 35996-2018 Rapid determination of eight elements content for phosphate rock and concentrate—X-ray fluorescence spectrometry
  • GB/T 4333.5-2016 Ferrosillicon—Determination of silicon, manganese, aluminium, calcium, chromium and iron contents—Wavelength dispersive X-ray fluorescence spectrometry (Fused cast bead method)
  • GB/T 4702.6-2016 Chromium metal—Determination of iron, aluminium, silicon and copper content—Inductively coupled plasma atomic emission spectrometry method
  • GB/T 5195.16-2017 Fluorspar—Determination of silicon, aluminum, iron, potassium, magnesium and titanium content—Inductively coupled plasma atomic emission spectrometry

工业和信息化部, Atomic Emission Spectroscopy and X-ray Fluorescence

  • YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
  • YB/T 4144-2019 Establish and control atomic emission spectroscopy chemical analysis curve rules
  • YB/T 4780-2019 Determination of silicon, calcium and aluminum content in calcium silicon alloys by wavelength dispersive X-ray fluorescence spectrometry (cast glass plate method)
  • YB/T 4907-2021 Determination of ferromanganese, manganese-silicon alloys and metal manganese manganese, silicon, iron and phosphorus contents by wavelength dispersive X-ray fluorescence spectrometry
  • YB/T 4850-2020 Determination of direct reduced iron total iron, phosphorus, sulfur, silica, aluminum oxide, calcium oxide and magnesium oxide content by wavelength dispersive X-ray fluorescence spectrometry
  • YS/T 1057.4-2022 Methods for chemical analysis of cobalt tetroxide Part 4: Determination of potassium and sodium content Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 1157.3-2016 Methods for chemical analysis of crude cobalt hydroxide Part 3: Determination of calcium and magnesium content Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
  • YB/T 4583.2-2017 Determination of potassium oxide and sodium oxide content in mullite by inductively coupled plasma atomic emission spectrometry

Jilin Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB22/T 1691-2012 Rapid Determination of Phosphorus and Potassium in Compound Fertilizers by X-ray Fluorescence Spectrometry
  • DB22/T 265-2020 Determination of Silicon and Phosphorus in Ferrochrome - Acid-soluble and Alkali-fusion-Inductively Coupled Plasma Atomic Emission Spectrometry

VN-TCVN, Atomic Emission Spectroscopy and X-ray Fluorescence

  • TCVN 3172-2008 Petroleum and petroleum products.Determination of sulfur by energy-dispersive X-ray fluorescence spectrometry

RU-GOST R, Atomic Emission Spectroscopy and X-ray Fluorescence

  • GOST R 51947-2002 Petroleum and petroleum products. Determination of sulphur by method of energy-dispersive X-ray fluorescence spectrometry
  • GOST 32139-2013 Petroleum and petroleum products. Determination of sulfur content by method of energy dispersive X-ray fluorescence spectrometry
  • GOST 32984-2014 Solid mineral fuel. Determination of major and minor elements in ash by X-ray fluorescence spectrometric method
  • GOST R 51927-2002 Steel and cast iron. Atomic emission nith inductively coupled plasma spectral method of calcium determination

GOSTR, Atomic Emission Spectroscopy and X-ray Fluorescence

  • GOST 33194-2014 Petroleum and petroleum products. Determination of sulfur content by wavelength dispersive X-ray fluorescence spectrometry method
  • GOST 32139-2019 Petroleum and petroleum products. Determination of sulfur content by energy dispersive X-ray fluorescence spectrometry method
  • GOST 34242-2017 Petroleum and petroleum products. Determination nickel, vanadium and iron by methods atomic emission spectrometry with inductively coupled plasma
  • PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry

Professional Standard - Petrochemical Industry, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SH/T 0631-1996 Determination of barium, calcium, phosphorus, sulfur and zinc in lubricating oils and additives (X-ray fluorescence spectrometry)
  • NB/SH/T 0842-2010 Standard test method for sulfur in gasoline and diesel fuel by monochromatic wavelength dispersive X-ray fluorescence spectrometry
  • NB/SH/T 0822-2010 Standard test method for determination of phosphorus,sulfur,calcium,and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy
  • SH/T 0706-2001 Petroleum products-Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods

Heilongjiang Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB23/T 1906-2017 Determination of content of magnesium, aluminum, silicon, potassium, calcium and iron in graphite raw ore and concentrate X-ray fluorescence spectrometry
  • DB23/T 2076-2018 Determination of Pb, Cd and As elements in ambient air fine particulate matter (PM2.5) by wavelength dispersive-X-ray fluorescence spectrometry

Yunnan Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB53/T 639.7-2014 Methods for chemical analysis of direct reduced iron - Part 7: Determination of multiple elements by X-ray fluorescence spectrometry

Standard Association of Australia （SAA）, Atomic Emission Spectroscopy and X-ray Fluorescence

  • AS 2564:1982 Aluminium ores - Determination of aluminium, silicon, iron, titanium and phosphorus contents - Wavelength dispersive X-ray fluorescence spectrometric method
  • AS 3641.1:1999 Recommended practice for atomic emission spectrometric analysis - Principles and techniques
  • AS 2564:1982(R2013)
  • AS 4862:2000 Lead and lead alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method
  • AS 4699:2000 Zinc and zinc alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method
  • AS ISO 24237:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
  • AS ISO 19318:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
  • AS 4861:2004 Aluminium and aluminium alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method
  • AS 1038.14.3:1999(R2013)
  • AS 1038.14.3:1999 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Wavelength dispersive X-ray fluorescence spectrometric method
  • AS 3515.4:2007 Gold and gold bearing alloys - Determination of gold content (greater than 99.95 percent) - Inductively coupled plasma - Atomic emission spectrometry
  • AS 4119:2007 Determination of platinum and palladium in gold and gold bearing alloys - Flame atomic absorption spectrometry (FAAS) or inductively coupled plasma-atomic emission spectrometry (ICP-AES) (fire assay methods)

Shaanxi Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB61/T 1580-2022 Determination of Inorganic Elements in Soils and Sediments Energy Dispersive X-ray Fluorescence Spectrometry

海关总署, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SN/T 5412-2022 Determination of cobalt, copper and manganese content in cobalt concentrates by wavelength dispersive X-ray fluorescence spectrometry

Professional Standard - Environmental Protection, Atomic Emission Spectroscopy and X-ray Fluorescence

  • HJ 780-2015 Soil and sediment-Determination of inorganic element- Wavelength dispersive X-ray fluorescence spectrometry

Canadian General Standards Board （CGSB), Atomic Emission Spectroscopy and X-ray Fluorescence

  • CGSB 3.0 NO. 16.1-98-CAN/CGSB-1998 Methods of Testing Petroleum and Associated Products; Sulphur in Gasoline by Energy Dispersive X-Ray Fluorescence Spectrometry (EDXRF)
  • CGSB 3.0 NO.16.0-2004-CAN/CGSB-2004 Methods of Testing Petroleum and Associated Products Sulphur in Diesel Fuel and Similar Middle Distillates by Energy Dispersive X-Ray Fluorescence Spectrometry (EDXRF)

国家市场监督管理总局、中国国家标准化管理委员会, Atomic Emission Spectroscopy and X-ray Fluorescence

  • GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products—Energy dispersive X-ray fluorescence spectrometry
  • GB/T 40312-2021 Ferrophosphorus—Determination of phosphorus, silicon, manganese and titanium content—Wavelength dispersive X-ray fluorescence spectrometry method (fused cast bead method)
  • GB/T 40196-2021 Method for analysing CCA and ACQ in preservative-treated wood and wood preservatives by X-ray fluorescence spectroscopy
  • GB/T 39560.301-2020 Determination of certain substances in electrical and electronic products—Part 3-1: Screening lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
  • GB/T 5687.13-2021 Ferrochromium—Determination of chromium, silicon, manganese, titanium, vanadium, iron contents—Wavelength dispersive X-ray fluorescence spectrometry (fused cast bead method)
  • GB/T 36226-2018 Stainless steel—Determination of manganse, nickel, chromium, molybdenum, copper and titanium—Handheld energy dispersive X-Ray fluorescence spectrometric method (semiquantitative method)
  • GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
  • GB/T 38233-2019 Iron-bearing dust and sludge- Determination of lead and zinc content- Inductively coupled plasma atomic emission spectrometry
  • GB/T 223.88-2019 Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
  • GB/T 8151.22-2020 Methods for chemical analysis of zinc concentrates—Part 22: Determination of zinc, copper, lead,iron,aluminium ,calcium and magnesium contents—Wavelength dispersive X-ray fluorescence spectrometric method

IPC - Association Connecting Electronics Industries, Atomic Emission Spectroscopy and X-ray Fluorescence

  • IPC TM-650 2.3.44-2016 Determination of Thickness and Phosphorus Content in Electroless Nickel (EN) Layers by X-Ray Fluorescence (XRF) Spectrometry

Professional Standard - Building Materials, Atomic Emission Spectroscopy and X-ray Fluorescence

  • JC/T 2213-2014 Dielectric ceramic materials of barium zirconate titanate.Determination of the zirconium, titanium and barium content.X-ray fluorescence spectrometric method

AENOR, Atomic Emission Spectroscopy and X-ray Fluorescence

  • UNE-EN ISO 14597:1999 PETROLEUM PRODUCTS . DETERMINATION OF VANADIUM AND NICKEL CONTENT. WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (ISO 14597:1997)
  • UNE-EN ISO 21587-3:2008 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)
  • UNE-EN 15063-2:2008 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
  • UNE-EN 15063-1:2015 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
  • UNE-EN 14784-2:2006 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays

Professional Standard - Machinery, Atomic Emission Spectroscopy and X-ray Fluorescence

  • JB/T 8425-1996 Standard test method of X-ray fluorescence spectrometric analysis of content of chromium, nickel, molybdenum and vanadium in iron base dusty spray

Inner Mongolia Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB15/T 1461-2018 Determination of copper, lead and zinc in copper, lead and zinc ores - X-ray fluorescence spectrometry

Gansu Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB62/T 2762-2017 Determination of Multielement Content in Stainless Steel Slag and Chromium Slag Wavelength Dispersive X-ray Fluorescence Spectrometry
  • DB62/T 2761-2017 Determination of multi-element content in stainless steel dust and chrome drainage sand by wavelength dispersive X-ray fluorescence spectrometry

Professional Standard - Textile, Atomic Emission Spectroscopy and X-ray Fluorescence

  • FZ/T 01163-2022 Determination of total lead and total cadmium content in textiles and their accessories X-ray fluorescence spectrometry (XRF) analysis method

国家能源局, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts by X-ray fluorescence spectrometry

Hebei Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB13/T 5090-2019 Determination of Potassium Oxide and Sodium Oxide Content in Continuous Casting Mold Flux by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • DB13/T 2855-2018 Determination of molybdenum iron silicon, phosphorus and copper content by inductively coupled plasma atomic emission spectrometry
  • DB13/T 5588-2022 Determination of steel slag total iron, silicon dioxide, calcium oxide, magnesium oxide and aluminum oxide by wavelength dispersive X-ray fluorescence spectrometry
  • DB13/T 5091-2019 Determination of ferromanganese, manganese silicon, ferromanganese nitride and metal manganese silicon, manganese and phosphorus content Wavelength dispersive X-ray fluorescence spectrometry (cast glass method)
  • DB13/T 5589-2022 Determination of phosphorus, titanium, manganese, chromium, potassium and sodium content in steel slag by inductively coupled plasma atomic emission spectrometry

Professional Standard - Medicine, Atomic Emission Spectroscopy and X-ray Fluorescence

  • YY/T 1408-2016 Performance characteristics and test methods of imaging system of single photon emission and X-ray computed tomograph

PL-PKN, Atomic Emission Spectroscopy and X-ray Fluorescence

  • PN H04239-1992 Chemical analysis of hardmetals. Determination of tantalum, niobium, cobalt, titanium and tungsten contents in solutions of samples by X-ray fluorescence spectrometry

Professional Standard - Ferrous Metallurgy, Atomic Emission Spectroscopy and X-ray Fluorescence

  • YB/T 4475-2015 Steel sheets and strips.Analysis of zinc-and aluminium-based metallic coatings.Glow-discharge optical-emission spectrometric method
  • YB/T 4395-2014 Steel.Determination of molybdenum, niobium and tungsten contents.Inductively coupled plasma atomic emission spectrometric method
  • YB/T 4461-2015 High purity ferrosilicon.Determination of zirconium and molybdenum content.Inductively coupled plasma atomic emission spectrometric method
  • YB/T 4394-2014 Molybdenum oxide.Determination of cooper, phosphorus, tin and antimony content.Inductively coupled plasma atomic emission spectrometry
  • YB/T 4200-2009 Determination of vanadium pentoxide sulfur; phosphorus; arsenic and iron content by inductively coupled plasma atomic emission spectrometry

BE-NBN, Atomic Emission Spectroscopy and X-ray Fluorescence

  • NBN T 03-449-1983 Cryolite, natural and artificial, and aluminium fluoride for industrial use - Determination of sulphur content -X-ray fluorescence spectrometric method

国家质量监督检验检疫总局, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SN/T 1504.5-2017 Plastic raw materials for food containers and packaging Part 5: Determination of impurity element content in polyolefins by X-ray fluorescence spectrometry

Professional Standard - Energy, Atomic Emission Spectroscopy and X-ray Fluorescence

  • NB/SH/T 0880-2014 Standard test method for determination of calcium, chlorine, copper, magnesium ,phosphorus, sulfur, and zinc in unused lubricating oils and additives by wavelength dispersive X-ray fluorescence spectrometry (mathematical correction procedure)

Professional Standard - Geology, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DZ/T 0279.10-2016 Methods of Analysis of Regional Geochemical Samples - Part 10: Determination of Chlorine and Bromine Quantification Powder Compression - X-ray Fluorescence Spectrometry

Guangxi Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB45/T 2110-2019 Determination of Phosphorus and Sulfur in Plants by Inductively Coupled Plasma-Atomic Emission Spectrometry
  • DB45/T 1342-2016 Determination of total sulfur, total phosphorus and total potassium in soil by inductively coupled plasma atomic emission spectrometry

International Electrotechnical Commission (IEC), Atomic Emission Spectroscopy and X-ray Fluorescence

  • IEC 62321-5:2013 Determination of certain substances in electrotechnical products - Part 5: Determination of cadmium, lead, and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP- OES and ICP-MS

ES-UNE, Atomic Emission Spectroscopy and X-ray Fluorescence

  • UNE-EN 62541-13:2015 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
  • UNE-EN ISO 16371-2:2018 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017, Corrected version 2018-05)
  • UNE-EN 62321-3-1:2014 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry (Endorsed by AENOR in July of 2014.)
  • UNE-EN ISO 20884:2020/A1:2022 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1 (ISO 20884:2019/Amd 1:2021)

农业农村部, Atomic Emission Spectroscopy and X-ray Fluorescence

  • NY/T 3318-2018 Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt and molybdenum in feed Atomic emission spectrometry

PH-BPS, Atomic Emission Spectroscopy and X-ray Fluorescence

  • PNS IEC 62321-3-1:2021 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry

European Committee for Electrotechnical Standardization（CENELEC）, Atomic Emission Spectroscopy and X-ray Fluorescence

  • EN 62321-3-1:2014 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry

Anhui Provincial Standard of the People's Republic of China, Atomic Emission Spectroscopy and X-ray Fluorescence

  • DB34/T 3368.1-2019 Methods for the analysis of hazardous substances in printed circuit boards - Part 1: Rapid screening X-ray fluorescence spectrometry for lead, mercury, chromium, cadmium and bromine

Professional Standard - Agriculture, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SN/T 1732.22-2018 Pyrotechnic agents for fireworks and firecrackers - Part 22: Qualitative detection of lead, chromium, cadmium, mercury and arsenic by energy-dispersive X-ray fluorescence spectrometry

ZA-SANS, Atomic Emission Spectroscopy and X-ray Fluorescence

  • SANS 408:2007 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Wavelength dispersive X-ray fluorescence spectrometric method

  Atomic Emission Spectroscopy and X-ray Fluorescence.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved