ZH
RU
ES

Metal incubator

Metal incubator, Total:248 items.

In the international standard classification, Metal incubator involves: Laboratory medicine, Conducting materials, Insulating fluids, Valves, Sterilization and disinfection, Electrical and electronic testing, Kitchen equipment, Microbiology, Thermodynamics and temperature measurements, Analytical chemistry, Testing of metals, Electrical equipment for working in special conditions, Piezoelectric and dielectric devices, Products of non-ferrous metals, Geology. Meteorology. Hydrology, Non-ferrous metals, Biology. Botany. Zoology, Veterinary medicine, Protection against fire, Automatic controls for household use, Springs, Corrosion of metals, Powder metallurgy, Miscellaneous domestic and commercial equipment, Wastes, Electrical accessories, Environmental testing, Medical equipment, First aid, Components for aerospace construction, Cans. Tins. Tubes, Electrical engineering in general, Fasteners, Chipless working equipment, Power transmission and distribution networks, Switchgear and controlgear, Building accessories, Installations in buildings, Elements of buildings, Internal combustion engines for road vehicles, Cases. Boxes. Crates, Materials for aerospace construction, Fishing and fish breeding, General methods of tests and analysis for food products, Electricity. Magnetism. Electrical and magnetic measurements, Iron and steel products.


KR-KS, Metal incubator

Taiwan Provincial Standard of the People's Republic of China, Metal incubator

  • CNS 9582-1982 Thermostat Metal Sheats for Electric Apparatus
  • CNS 9583-1982 Method of test for Thermostat Metal Sheets for Electric Apparatus
  • CNS 12256-1988 Ovens for Quartz Crystal Units
  • CNS 3990-1995 A.C. Metal-enclosed Switchgear and Controlgear for Rated Voltages from 3.3 KV to 36 KV
  • CNS 13551-1995 Bus for A.C. Metal-enclosed Switchgear and Controlgear
  • CNS 13542-1995 Low-voltage Metal-enclosed Switchgear
  • CNS 3991-1995 Method of Test for A.C. Metal-enclosed Switchgear and Controlgear for Rated Voltages from 3.3 KV to 36 KV

Korean Agency for Technology and Standards (KATS), Metal incubator

National Metrological Technical Specifications of the People's Republic of China, Metal incubator

  • JJF(纺织) 060-2010 Calibration Specification for Constant Temperature Humidity Chambers
  • JJF(纺织)060-2010 Calibration Specification for Constant Temperature Humidity Chambers
  • JJF(建材)129-2018 Calibration Specification for Constant Temperature and Humidity Chambers for Safety Glass
  • JJF(建材) 129-2018 Calibration specification for constant temperature and humidity chamber for safety glass testing

Defense Logistics Agency, Metal incubator

Indonesia Standards, Metal incubator

未注明发布机构, Metal incubator

  • GJB/J 3827-1999 Calibration procedures for standard constant temperature and humidity chambers

Group Standards of the People's Republic of China, Metal incubator

Professional Standard - Medicine, Metal incubator

  • YY 0027-1990 Electric heated incubators of constant temperature

German Institute for Standardization, Metal incubator

  • DIN 1715-2:1983-11 Thermostat metals; testing the specific thermal curvature
  • DIN 1715-1:1983-11 Thermostat metals; technical delivery conditions
  • DIN 1715-1:1983 Thermostat metals; technical delivery conditions
  • DIN 12880:2007 Electrical laboratory devices - Heating ovens and incubators
  • DIN 1715-2:1983 Thermostat metals; testing the specific thermal curvature
  • DIN 14880:2013 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
  • DIN 14880:2007 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
  • DIN 58945-2:1971 Incubators for microbiological purposes; testing
  • DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
  • DIN 14880:2002 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
  • DIN 58945-1:1971 Incubators for microbiological purposes; terms, requirements, use
  • DIN 14880:2013-12 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
  • DIN EN 60068-3-11:2008 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers (IEC 60068-3-11:2007); German version EN 60068-3-11:2007

RO-ASRO, Metal incubator

ZA-SANS, Metal incubator

IN-BIS, Metal incubator

American Society for Testing and Materials (ASTM), Metal incubator

  • ASTM B106-96(2002)e1 Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B106-96 Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B106-08 Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B106-08(2013) Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B388-06 Standard Specification for Thermostat Metal Sheet and Strip
  • ASTM B388-00 Standard Specification for Thermostat Metal Sheet and Strip
  • ASTM B106-08(2019) Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B388-06(2012) Standard Specification for Thermostat Metal Sheet and Strip
  • ASTM B388-06(2018) Standard Specification for Thermostat Metal Sheet and Strip
  • ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
  • ASTM B478-85(2003) Standard Test Method for Cross Curvature of Thermostat Metals
  • ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
  • ASTM E1292-94(2001) Standard Specification for Gravity Convection and Forced Ventilation Incubators
  • ASTM B223-97 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B223-03 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B223-08(2013) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B389-81(2016) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B362-91(2016) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • ASTM E1292-94(2011) Standard Specification for Gravity Convection and Forced Ventilation Incubators
  • ASTM B362-91(2003) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • ASTM B389-81(2004) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • ASTM B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • ASTM B753-07 Standard Specification for Thermostat Component Alloys
  • ASTM B753-86(1998) Standard Specification for Thermostat Component Alloys
  • ASTM B753-01 Standard Specification for Thermostat Component Alloys
  • ASTM B753-07(2013) Standard Specification for Thermostat Component Alloys
  • ASTM B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • ASTM E466-96 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
  • ASTM E466-96(2002)e1 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
  • ASTM E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
  • ASTM E466-15 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

Japanese Industrial Standards Committee (JISC), Metal incubator

National Metrological Verification Regulations of the People's Republic of China, Metal incubator

Professional Standard - Water Conservancy, Metal incubator

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal incubator

  • GB/T 33861-2017(英文版) Test method of energy efficiency for temperature test chambers
  • GB/T 32550-2016 Corrosion of metals and alloys.Determination of the critical pitting temperature under potentiostatic control
  • GB/T 32710.13-2016 Safety requirements for environmental testing and conditioning equipment.Part 13:Shakers, shaking water baths and shaking incubators
  • GB/T 32710.9-2016 Safety requirements for environmental testing and conditioning equipment.Part 9:Electric heating incubators
  • GB/T 18456-2001 Packing container 1m3steel middle-sized bulk case
  • GB/T 31317-2014 Corrosion of metals and alloys.Black box exposure test method
  • GB/T 14986-2008 High saturation magnetic induction, magnetic compensate alloys depending on temperature variation, corrosion-resisting,iron-aluminium, Permanent permeability, soft magneticalloys

American National Standards Institute （ANSI), Metal incubator

国家能源局, Metal incubator

GB-REG, Metal incubator

  • REG NACA-TN-3462-1955 Tensile properties of 7075-T6 and 2024-T3 aluminum-alloy sheet heated at uniform temperature rates under constant load

European Committee for Standardization (CEN), Metal incubator

  • CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control

Danish Standards Foundation, Metal incubator

  • DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control

British Standards Institution (BSI), Metal incubator

  • BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
  • BS ISO 18089:2015 Corrosion of metals and alloys. Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
  • BS ISO 4680:2022 Corrosion of metals and alloys. Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
  • 21/30415532 DC BS ISO 4680. Corrosion of metals and alloys. Method of uniaxial constant load test for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
  • BS 2911:1974 Specification for letter plates

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Metal incubator

  • JEDEC JESD214-2015 Constant-Temperature Aging Method to Characterize Copper Interconnect Metallization for Stress-Induced Voiding

BE-NBN, Metal incubator

  • NBN T 31-006-1979 Vulcanized rubbers - Determination of tensile stress-strain properties

Professional Standard - Electron, Metal incubator

  • SJ/T 31391-1994 Requirements of readiness and methods of inspection and assessment for constant temperature test chambers

Professional Standard - Light Industry, Metal incubator

CZ-CSN, Metal incubator

ES-AENOR, Metal incubator

HU-MSZT, Metal incubator

Professional Standard - Ferrous Metallurgy, Metal incubator

Lithuanian Standards Office , Metal incubator

  • LST EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
  • LST EN 60068-3-6-2003 Environmental testing. Part 3-6: Supporting documentation and guidance. Confirmation of the performance of temperature/humidity chambers (IEC 60068-3-6:2001)

AENOR, Metal incubator

  • UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)

Association Francaise de Normalisation, Metal incubator

  • NF A05-172*NF ISO 18089:2016 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
  • NF S64-030:2004 Rescue systems - Transportation on incubators - Part 2 : system requirements.
  • FD V08-601:2005 Microbiologie of food and animal feeding stuffs - Thermostatic chambers - Characterisation, verification and daily follow-up
  • NF H33-507:1987 Metal packaging. Biscuit tins.
  • NF E18-015:1988 Industrial thermometers. Bimetallic thermometers. Characteristics.

VE-FONDONORMA, Metal incubator

National Aeronautics and Space Administration (NASA), Metal incubator

International Organization for Standardization (ISO), Metal incubator

  • ISO 18089:2015 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
  • ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures

United States Navy, Metal incubator

Society of Automotive Engineers (SAE), Metal incubator

Underwriters Laboratories (UL), Metal incubator

  • UL 1315-1995 UL Standard for Safety Metal Waste Paper Containers First Edition; Reprint with Revisions Through and Including December 21, 2007

Canadian Standards Association (CSA), Metal incubator

Professional Standard - Machinery, Metal incubator

SAE - SAE International, Metal incubator

RU-GOST R, Metal incubator

BELST, Metal incubator

GM North America, Metal incubator

Professional Standard - Meteorology, Metal incubator

VN-TCVN, Metal incubator

  • TCVN 7303-2-20-2007 Medical electrical equipment.Part 2-20: Particular requirements for the safety of transport incubators

Military Standard of the People's Republic of China-General Armament Department, Metal incubator

  • GJB 3315A-2021 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
  • GJB 3315-1998 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
  • GJB 2153A-2018 Specification for high stable low frequency temperature coefficient constant elastic alloys
  • GJB 2153-1994 Specification for high stable low frequency temperature coefficient constant elastic alloys
  • GJB 10123-2021 General specifications for military metal packaging boxes
  • GJB 9740-2020 Specifications for spacecraft metal diaphragm storage tanks
  • GJB 9739-2020 Specification for spacecraft metal diaphragm storage tanks
  • GJB 445-1988 Test method for high temperature tensile strength of adhesives (metal to metal)

U.S. Military Regulations and Norms, Metal incubator

Fujian Provincial Standard of the People's Republic of China, Metal incubator

SE-SIS, Metal incubator

Professional Standard - Construction Industry, Metal incubator

JP-JCS, Metal incubator

  • JCS 1363-2009 High strength grade thermo resistant aluminium alloy conductors ,steel reinforced

Professional Standard - Automobile, Metal incubator

Professional Standard - Commodity Inspection, Metal incubator

  • SN/T 3567.5-2015 Cross-primed isothermal amplification detection method part 5: Salmonella

Professional Standard - Non-ferrous Metal, Metal incubator

  • YS/T 969-2014 Method of constant temperature tensile test for nickel-titanium shape memory alloy wires

American Society of Mechanical Engineers (ASME), Metal incubator

Liaoning Provincial Standard of the People's Republic of China, Metal incubator

Professional Standard-Packaging, Metal incubator

GM Global, Metal incubator

  • GMW 15450-2012 Internal Cleanliness of Nonmetallic Fuel Tanks Issue 2; English

冶金工业部, Metal incubator

IT-UNI, Metal incubator

  temperate box, Fruit incubator, Cryostat, Medical incubator, liquid incubator, Medical incubator, Thermostat Specifications, Thermostat Specifications, Medical incubator, large incubator, incubator medical, Medical incubator, incubator for, liquid incubator, where is the incubator, where is the incubator, Performance Thermostat, Electric thermostat, Metal incubator, Medical incubator Medical incubator.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved