ZH
RU
ES

2 Experimental materials and methods 2

2 Experimental materials and methods 2, Total:497 items.

In the international standard classification, 2 Experimental materials and methods 2 involves: Insulating materials, Quality, Lubricants, industrial oils and related products, Wood-based panels, Dentistry, Road engineering, Protection against fire, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Materials for aerospace construction, Corrosion of metals, Fertilizers, Insulating fluids, Refractories, Products of the chemical industry, Rubber, Fluid power systems, Electricity. Magnetism. Electrical and magnetic measurements, Raw materials for rubber and plastics, Testing of metals, Organic chemicals, Products of the textile industry, Glass, Heat recovery. Thermal insulation, Analytical chemistry, Electronic component assemblies, Plastics, Nuclear energy engineering, Wastes, Environmental testing, Powder metallurgy, Rubber and plastics products, Wind turbine systems and other alternative sources of energy, Materials for the reinforcement of composites, Paint ingredients, Printed circuits and boards, Graphic technology, Paints and varnishes, Reinforced plastics, Materials and articles in contact with foodstuffs, Test conditions and procedures in general, Protection of and in buildings, Electrical engineering in general, Surface treatment and coating, Birth control. Mechanical contraceptives, Wood, sawlogs and sawn timber, Biology. Botany. Zoology, Medical sciences and health care facilities in general, Kitchen equipment, Equipment for the chemical industry, Semiconducting materials, Ceramics, Conducting materials, Electrical and electronic testing, Electrical wires and cables, Footwear, Mechanical testing, Sterilization and disinfection, Welding, brazing and soldering, Buildings, Structures of buildings, Standardization. General rules, Fluid storage devices, Wood technology processes, Textile fibres, Protective equipment, Non-textile floor coverings.

Indonesia Standards, 2 Experimental materials and methods 2

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods
SNI 04-6190.3.2-2000 Common test methods for insulating and sheathing materials of electric cables. Part 3: Method specific to PVC compound - Section 2: Lost of mass test - Thermal stability tests
SNI 04-6190.3.1-2001 Common test methods for insulating and sheathing materials of electrical cables - Part 3: Methods specific to PVC compound - Section 1: Pressure test at high temperature - Test for resistance to cracking
SNI 04-6190.4.2-2001 Common test methods for insulating and sheating materials of electrical cables. Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Elongation to break after pre-conditioning - Wrapping test after pre-conditioning - Wrappin
SNI 1740-2008 Testing methods fire test of building materials for fire protection in houses and buildings
SNI 04-6190.1.3-2001 Common test methods for insulating and sheating materilas of electric cables - Part 1: Methods for general applications - Section 3: Methods for determining the density - Water absorption tests - Shrink
SNI 8059-2014 Standard practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials

RU-GOST R, 2 Experimental materials and methods 2

GOST 27640-1988 Engineering materials and lubricants. Experimental evaluation of coefficient of friction
GOST 17177-1994 Thermal insulating materials and products for building application. Test methods
GOST 17177-1987 Heat insulating construction materials and products. Methods of control
GOST 30629-1999 Cladding materials and products made of natural stone. Test methods
GOST 30629-2011 Facing materials and products made of natural stone. Test methods
GOST EN 14397-2-2014 Fertilizers and liming materials. Determination of carbon dioxide content. Part 2. Method for liming materials
GOST ISO 1389-2-1993 Phthalic angydride for industrial use. Methods of test. Part 2. Measurement of colour of the molten material
GOST R IEC 60811-1-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST 29318-1992 Paints and varnishes. Evaluation of compatibility of a product with a surface to be painted. Methods of test
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST R IEC 61189-2-2012 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Part 2. Test methods for materials for interconnection structures
GOST IEC 60811-2-1-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST 23.208-1979 Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles
GOST IEC 60811-1-2-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST R 52540-2006 Refractory clays and kaolins for production of refractories. Acceptance rules and methods of sampling
GOST R 51372-1999 Accelerated life and storable life tests methods in special aggresive and other special medias for technical products, matherial and sistems of matherials. General

Guangdong Provincial Standard of the People's Republic of China, 2 Experimental materials and methods 2

DB44/T 411-2007 Wood-plastic Composites—Examination and Test Methods

NL-NEN, 2 Experimental materials and methods 2

NEN-EN 590-1993 Automative fuels. Diesel. Requirements and methods of test
NEN-EN 589-1993 Automative fuels. LPG. Requirements and methods of test
NEN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)

German Institute for Standardization, 2 Experimental materials and methods 2

DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification; German version EN 12802:2011 / Note: To be replaced by DIN EN 12802 (2018-12).
DIN EN 14397-2:2004-09 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials; German version EN 14397-2:2004
DIN EN 1186-2:2020 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils; German and English version prEN 1186-2:2020
DIN EN ISO 6892-2:2018-09 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018); German version EN ISO 6892-2:2018
DIN EN 1186-2:2022 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils
DIN EN ISO 4892-2:2021-11 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013 + Amd 1:2021); German version EN ISO 4892-2:2013 + A1:2021
DIN EN 1183:1997-08 Materials and articles in contact with foodstuffs - Test methods for thermal shock endurance; German version EN 1183:1997
DIN EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
DIN EN 932-2:1999-03 Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999
DIN 53249:1995 Solvents for paints, varnishes and similar coating materials - Dipentene - Requirements and methods of test
DIN EN 60672-2:2000 Ceramic and glass insulating materials - Part 2: Methods of test (IEC 60672-2:1999); German version EN 60672-2:2000
DIN EN 60371-2:2005 Specification for insulating materials based on mica - Part 2: Methods of test (IEC 60371-2:2004); German version EN 60371-2:2004
DIN EN 252:1990 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; german version EN 252:1989
DIN EN 60371-2 Berichtigung 1:2006 Specification for insulating materials based on mica - Part 2: Methods of test (IEC 60371-2:2004); German version EN 60371-2:2004, Corrigenda to DIN EN 60371-2 (VDE 0332-2):2005-05
DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN ISO 4892-2:2000 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994); German version EN ISO 4892-2:1999
DIN EN 61189-2:2007-01 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (IEC 61189-2:2006); German version EN 61189-2:2006 / Note: DIN EN 61189-2 (200...
DIN EN ISO 14855-2:2018-12 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (IS...
DIN EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998
DIN EN 60626-2:2010 Combined flexible materials for electrical insulation - Part 2: Methods of test (IEC 60626-2:2009); German version EN 60626-2:2009
DIN EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
DIN EN 61189-2:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (IEC 61189-2:2006); German version EN 61189-2:2006
DIN EN 13706-2:2003 Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements; German version EN 13706-2:2002
DIN EN 1217:1998-01 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN ISO 15011-2:2010-03 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO<(Index)2>), nitrogen monoxide (NO) and nitrogen dioxide (N...
DIN CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test; German version CEN/TS 15397:2006
DIN EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 13258:2003-07 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 1184:1997-08 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles; German version EN 1184:1997
DIN EN IEC 61189-2-807:2023-01 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-807: Test methods for materials for interconnection structures - Decomposition temperature (Td) using TGA (IEC 61189-2-807:2021); German ...
DIN EN 2002-002 Berichtigung 1:2007-08 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005, Corrigenda to DIN EN 2002-002:2006-11
DIN EN 2002-002:2006-11 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005
DIN EN 252:2015 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; German version EN 252:2014
DIN EN 1186-2:2022-10 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils; German version EN 1186-2:2022
DIN EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
DIN EN 2002-002:2006 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005

Military Standard of the People's Republic of China-General Armament Department, 2 Experimental materials and methods 2

GJB 10276-2021 Test methods for identification of ship secondary shielding materials

International Organization for Standardization (ISO), 2 Experimental materials and methods 2

ISO 15912:2006/Amd 1:2011 Dentistry - Casting investments and refractory die materials; Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials
ISO 3865:1977 Title missing - Legacy paper document
ISO 3865:1983 Rubber, vulcanized - Methods of test for staining in contact with organic material
ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4892-2:1994 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
ISO 20819-2:2023 Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods
ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
ISO 15527:2010 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
ISO 14855-2:2007/cor 1:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test; Techn
ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 6892-2:2018 Metallic materials - Tensile testing- Part 2:Method of test at elevated temperature
ISO 4892-2:2006/Amd 1:2009 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1
ISO 14855-2:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO 14855-2:2018 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO 23409:2011 Male condoms - Requirements and test methods for condoms made from synthetic materials
ISO 10722:2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)
ISO/TS 16774-2:2023 Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance
ISO 16474-2:2013 Paints and varnishes.Methods of exposure to laboratory light sources .Part 2: Xenon-arc lamps

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, 2 Experimental materials and methods 2

GB/T 14041.2-2007 Hydraulic fluid power Filter elements Part 2 : Verification of material compatibility with fluids
GB/T 28876.2-2014 Flammability of materials in space experimental facilities.Part 2:Test methods
GB/T 8411.2-1987 Porcelain insulating material for electrical applications--Part 2:Test methods
GB/T 14041.2-1993 Hydraulic fluid power.Filter elements.Verification of material compatibility with fluids
GB/T 7286.1-1987 Test Method for total normal emittance of metals and nonmetallic materials
GB/T 24176-2009 Metallic materials.Fatigue testing.Statistical planning and analysis of data
GB/T 7286.2-1987 Test method for normal spectral emittance of metals and nonmetallic materials
GB/T 239.2-2023 Wire rods of metallic materials - Part 2: Test methods for bidirectional torsion
GB/T 239.2-2012 Metallic materials.Wire.Part 2:Reverse torsion test
GB/T 16422.2-1999 Plastics--Methods of exposure to laboratory light sources Part 2: Xenon--arc sources
GB/T 16422.2-2014 Plastics.Methods of exposure to laboratory light sources.Part 2:Xenon-arc sources
GB/T 20671.6-2006 Classification system and test methods for nonmetallic gasket materials-Part6:Standard test method for adhesion of gasket materials to metal surfaces
GB/T 228.2-2015 Metallic materials.Tensile testing.Part 2:Method of test at elevated temperature
GB/T 34542.2-2018 Storage and transportation systems for gaseous hydrogen.Part 2:Test methods for evaluating metallic material compatibility in hydrogen atmosphere
GB/T 20671.2-2006 Classification system and test methods for nonmetallic gasket materials-Part2:Standard test method for compressibility and recovery of gasket materials
GB/T 8411.2-2008 Ceramic and glass insulating materials.Part 2:Methods of test
GB/T 42764-2023 Test methods and requirements for the evaluation of the intrinsic aerobic biodegradability of plastic materials exposed to marine inoculum under laboratory mesothermal conditions
GB/T 5019.2-2009 Specification for insulating materials based on mica.Part 2:Methods of test
GB/T 20875.2-2010 Electrical insulating materials.Methods of test for the hydrolytic stability.Part 2:Moulded thermosets
GB/T 13465.2-2014 Test method of impermeable graphite materials.Part 2:Flexure strength
GB/T 7690.2-2001 Reinforcements--Test method for yarns Part 2: Determination of twist
GB/T 5591.2-2002 Combined flexble materials for electrical insulation Part 2: Methods for test
GB/T 13477.2-2002 Test method for building sealants Part 2: Determination of density
GB/T 7690.2-2013 Reinforcements.Test method for yarns.Part 2:Determination of twist
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 5070.2-2002 Chemical analysis of magnesia chromite refractories--Part 2: Determination of silicon dioxide--Molybdenum blue photometric method
GB/T 13477.19-2002 Test method for building sealants Part 19: Determination of change in mass and volume
GB/T 3048.2-2007 Test methods for electrical properties of wires and cables - Part 2: Tests for resistivity of metallic materials
GB/T 25965-2010 Test methods of normal emittance of materials and hemispherical emittance of all-glass evacuated collector tubes
GB/T 6901.2-2004 Chemical analysis of silica refractories-Part 2:Determination of silicon dioxide-Gravimetric-molybdenum blue photometric method
GB/T 19277.2-2013 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions.Method by analysis of evolved carbon dioxide.Part 2:Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

AASHTO - American Association of State Highway and Transportation Officials, 2 Experimental materials and methods 2

T50-1999 Standard Method of Test for Float Test for Bituminous Materials (Twentieth Edition)
T102-1983 Standard Method of Test for Spot Test of Asphaltic Materials (Twentieth Edition)
T 51-2000 Standard Method of Test for Ductility of Bituminous Materials (Twentieth Edition)
T300-2000 Standard Method of Test for Force Ductility Test of Bituminous Materials (Twentieth Edition)
T 250-1997 Standard Method of Test for Thermoplastic Traffic Line Material (Twentieth Edition)
T68-2000 Standard Method of Test for Tension Testing of Metallic Materials (Twentieth Edition; ASTM E8-99)
T68M-2000 Standard Method of Test for Tension Testing of Metallic Materials [Metric] (Twentieth Edition; ASTM E8M-99)
HM-20 PT I-2000 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications (Twentieth Edition)
HM-20 PT I TOC-2000 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications (Twentieth Edition)
T37-1999 Standard Method of Test for Sieve Analysis of Mineral Filler for Road and Paving Materials (Twentieth Edition; ASTM D546-94)

British Standards Institution (BSI), 2 Experimental materials and methods 2

BS EN 12802:2011 Road marking materials. Laboratory methods for identification
18/30382612 DC BS EN 12802. Road marking materials. Laboratory methods for identification
BS 1902 Sec.7.2:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of material as supplied and received (method 1902-702)
BS 1902 Sec.9.2:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
BS EN 993-3:1997 Methods of test for dense shaped refractory products - Test methods for carbon-containing refractories
BS 1902 Sec.2.2:1974 Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
BS 2782-7 Method 720B:1979 Methods of testing plastics - Rheological properties - Cup flow of phenolic and alkyd moulding materials
DD ENV 13258-1999 Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
BS 1924-2:1990 Stabilized materials for civil engineering purposes. Methods of test for cement-stabilized and lime-stabilized materials
BS EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at low temperatures
BS 5131-2.7:1980 Methods of test for footwear and footwear materials - Solings - The preparation of test pieces from soling materials for physical testing
BS EN 1184:1997 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
BS EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
21/30425937 DC BS EN ISO 4892-2 AMD1. Plastics. Methods of exposure to laboratory light sources. Part 2. Xenon-arc lamps
BS 1902 Sec.5.14:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500C) (methods 1902-5.14)
BS EN ISO 14855-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratoryscale test (ISO
BS EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
BS EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
20/30409082 DC BS EN 1186-2. Materials and articles in contact with foodstuffs. Plastics. Part 2. Test methods for overall migration in vegetable oils
BS 5131 Sec.2.7:1980 Methods of test for footwear and footwear materials. Solings. The preparation of test pieces from soling materials for physical testing
BS 5131-2.1:1991 Methods of test for footwear and footwear materials - Solings - Ross flexing method for cut growth resistance of soling materials
BS EN ISO 11114-5:2022 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Test methods for evaluating plastic liners
19/30388629 DC BS ISO 3865. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS 5131-2.11:1983 Methods of test for footwear and footwear materials - Solings - Resistance of solings to short-term contact with a hot surface
BS 5131 Sec.2.11:1983 Methods of test for footwear and footwear materials. Solings. Resistance of solings to short-term contact with a hot surface

European Committee for Standardization (CEN), 2 Experimental materials and methods 2

EN 12802:2000 Road Marking Materials - Laboratory Methods for Identification
EN 12802:2011 Road marking materials - Laboratory methods for identification
EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
EN ISO 4892-2:1999 Plastics - Methods of Exposure to Laboratory Light Sources - Part 2: Xenon-Arc Sources ISO 4892-2: 1994
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
HD 352.2 S1-1978 Specification for insulating materials based on mica; part 2: methods of test
EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
EN 13706-2:2002 Reinforced plastic composites - Specification for pultruded profiles - Part 2: Methods of test and general requirements
EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN 1184:1997 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DD ENV 13258-1998 Materials and Articles in Contact with Foodstuffs - Test Methods for Crazing Resistance of Ceramic Articles
HD 426.2 S1-1987 Specification for ceramic and glass insulating materials; part 2: methods of test
PD CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
EN ISO 16474-2:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
EN ISO 4892-2:2013/A1:2021 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 4892-2:2013/Amd 1:2021)
DD ENV 1186-13-1999 Materials and Articles in Contact with Foodstuffs - Plastics - Part 13: Test Method for Overall Migration at High Temperatures
EN 1183:1997 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
EN 1217:1997 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles

Association Francaise de Normalisation, 2 Experimental materials and methods 2

NF P98-604*NF EN 12802:2012 Road marking materials - Laboratory methods for identification.
NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
NF S10-200*NF ISO 17328:2022 Optics and photonics - Optical materials and components - Test method for refractive index of infrared optical materials
NF EN 60626-2:2010 Matériaux combinés souples destinés à l'isolement électrique - Partie 2 : méthodes d'essai
NF T45-028:1996 Rubber compounding ingredients. Protection agent, paraphenylenediamine type. Test methods.
NF T45-028:2006 Rubber compounding ingredients - P-Phenylenediamine (PPD) antidegradants - Test methods.
PR EN 3641:1994 Aerospace series - Test methods - Heat resisting alloys compacted materiel
NF C93-732:2000 Test methods for electrical materials, interconnection structures and assemblies - Part 2 : Test method for materials for interconnection structures.
NF A03-001-2*NF EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2 : method of test at elevated temperature
NF T51-195-2*NF EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2 : xenon-arc lamps
NF EN ISO 4892-2:2013 Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 2 : lampes à arc au xénon
NF T51-803-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2 : gravimetric measurement of carbon dioxide evolved in a laboratory-scale test.
NF B38-510-2*NF EN 12971-2:1999 Reinforcements. Specification for textile glass chopped strands. Part 2 : test methods and general requirements.
NF S10-024*NF ISO 22531:2020 Optics and photonics - Optical materials and components - Test method for climate resistance of optical glass
NF C26-401-2*NF EN 60672-2:2000 Ceramic and glass insulating materials - Part 2 : methods of test
NF C26-112*NF EN 60371-2:2005 Specification for insulating materials based on mica - Part 2 : methods of test
NF C26-112:1997 Specification for insuslating materials based on mica. Part 2 : methods of test.
NF EN 1186-2:2022 Matériaux et objets en contact avec les denrées alimentaires - Matière plastique - Partie 2 : méthodes d'essai pour la migration globale dans les huiles végétales
NF EN 61234-2:1998 Matériaux isolants électriques - Méthodes d'essai concernant la stabilité hydrolytique - Partie 2 : matériaux thermodurcissables moulés.
NF D25-113*NF EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
NF T51-803-2*NF EN ISO 14855-2:2018 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2 : gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
NF C26-144-2*NF EN 60626-2:2010 Combined flexible materials for electrical insulation - Part 2 : methods of test
NF D25-101-2*NF EN 1186-2:2003 Materials and articles in contact with foodstuffs - Plastics - Part 2 : test methods for overall migration into olive oil by total immersion.
NF EN 12697-32:2019 Matériaux enrobés - Méthodes d'essai - Partie 32 : confection d'éprouvettes par compacteur vibratoire
AC T51-808:2012 Plastiques - Évaluation expérimentale de l'oxobiodégradabilité de matériaux polyoléfiniques sous forme de films - Méthodologie et exigences
NF C26-144-2:1996 Combined flexible materials for electrical insulation. Part 2 : methods of test.
NF EN ISO 10722:2019 Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée - Endommagement causé par des matériaux granulaires (méthode d'essai en laboratoire)
NF EN 2243-2:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 2 : essai de pelage métal-métal
NF C93-732*NF EN 61189-2:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2 : test methods for materials for interconnection structures
NF EN 1217:1998 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour l'absorption d'eau par les objets en céramique
NF EN 1183:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour le choc thermique et la résistance au choc thermique
NF EN 13258:2003 Matériaux et articles en contact avec les denrées alimentaires - Méthodes d'essai de la résistance au tressaillage des articles en céramique
NF EN 14734:2022 Durabilité du bois et des matériaux dérivés du bois - Détermination de l'imprégnabilité d'essences de bois par des produits de préservation - Méthode de laboratoire
NF A03-001-2:2011 Metallic materials - Tensile testing - Part 2 : method of test at elevated temperature.
NF G38-123*NF EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method)
NF T57-800-2*NF EN 13706-2:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 2 : methods of test and general requirements.
NF T30-089-2*NF EN ISO 16474-2:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2 : xenon-arc lamps
NF D21-625*NF EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.
NF EN 14532-2:2005 Produits consommables pour le soudage - Méthodes d'essai et exigences de qualité - Partie 2 : méthodes complémentaires et évaluation de la conformité des produits consommables pour l'acier, le nickel et les alliages de nickel
NF EN 60544-2:2013 Matériaux isolants électriques - Détermination des effets des rayonnements ionisants sur les matériaux isolants - Partie 2 : méthodes d'irradiation et d'essai
NF T72-085-2:1988 Tests methods for wood preservatives. Laboratory method for determining the preventive effectiveness of a preservative treatment against blue stain in service. Part 2 : application by methods other than brushing.
NF C20-924-2-12*NF EN 60695-2-12:2011 Fire hazard testing - Part 2-12 : glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials.
NF EN ISO 5269-2:2005 Pâtes - Préparation des feuilles de laboratoire pour essais physiques - Partie 2 : méthode Rapid-Köthen
NF ISO 22531:2020 Optique et photonique - Matériaux et composants optiques - Méthode d'essai pour la résistance climatique du verre optique

Danish Standards Foundation, 2 Experimental materials and methods 2

DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
DS/EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
DS/ISO 3865:1985 Rubber, vulcanized. Methods of test for staining in contact with organic material
DSF M268237-2013 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
DS/EN 2310:1991 Aerospace series. Test methods for the flame resistance rating of non-metallic materials
DS/EN 932-2:1999 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
DS/EN 60371-2:2005 Specification for insulating materials based on mica - Part 2: Methods of test
DS/EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets
DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
DS/EN ISO 14855-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
DS/EN 60626-2:2010 Combined flexible materials for electrical insulation - Part 2: Methods of test
DS/EN 61189-2:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
DS/IEC 672-2:1984 Specification for ceramic and glass insulating materials. Part 2: Methods of test
DS/EN 1183:1998 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
DS/EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DS/EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
DS/EN 1186-2:2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion
DS/EN 1184:1998 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DS/EN 14532-2:2005 Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
DS/EN 2002-002:2006 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
DS/IEC 626-2:1981 Specification for combined flexible materials for electrical insulation. Part 2: Methods of test
DS/EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
DS/EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures

Lithuanian Standards Office , 2 Experimental materials and methods 2

LST EN 12802-2011 Road marking materials - Laboratory methods for identification
LST EN 14397-2-2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
LST EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
LST EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
LST EN 932-2-2002 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2006)
LST EN 60626-2-2010 Combined flexible materials for electrical insulation -- Part 2: Methods of test (IEC 60626-2:2009)
LST EN 1183-2000 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
LST EN 1217-2000 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
LST EN 13258-2004 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
LST EN 1186-2-2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion
LST EN 1184-2000 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
LST EN 14532-2-2005 Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
LST EN 2002-002-2006 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
LST EN 1186-12-2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
LST EN 1186-13-2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures

AENOR, 2 Experimental materials and methods 2

UNE-EN 12802:2012 Road marking materials - Laboratory methods for identification
UNE-EN 14397-2:2005 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
UNE-EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE-EN ISO 4892-2:2014 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
UNE-EN 932-2:1999 TESTS FOR GENERAL PROPERTIES OF AGGREGATES. PART 2: METHODS FOR REDUCING LABORATORY SAMPLES.
UNE 135203-2:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 2: Determination of the abrasion resistance by falling abrasive method.

CEN - European Committee for Standardization, 2 Experimental materials and methods 2

PREN 12802-2018 Road marking materials - Laboratory methods for identification
EN 2002-002:2005 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature

Professional Standard - Public Safety Standards, 2 Experimental materials and methods 2

GA 111-1995 Solid room fire test method for surface materials

Professional Standard - Machinery, 2 Experimental materials and methods 2

JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing
JB/T 8063.8-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 8:The EDTA-HO photometric method for the determination of iron in copper-based materials and products
JB/T 8063.2-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 2：The ammonium hydrogen fluoride masking,iodometriy method for the determination of copper in iron-based materials and products

Korean Agency for Technology and Standards (KATS), 2 Experimental materials and methods 2

KS P ISO 10271:2004 Dentistry－Determination of tarnish and corrosion of metal and alloys
KS I ISO 2943-2005(2020) Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS B ISO 12123:2006 Raw optical glass in bulk and preshaped forms-Bubblesand other inclusions-Test method and classification
KS B ISO 12123:2016 Raw optical glass in bulk and preshaped forms－Bubblesand other inclusions－Test method and classification
KS M ISO 4892-2-2017(2022) Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps
KS C IEC 61189-2:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies－Part 2：Test methods for materials for interconnection structures
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS C IEC 60672-2:2004 Ceramic and glass insulating materials-Part 2:Methods of test
KS C IEC 60672-2-2017(2022) Ceramic and glass insulating materials — Part 2: Methods of test
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 4892-2:2012 Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps
KS M ISO 4892-2:2017 Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps
KS M ISO 3865:2010 Rubber, vulcanized or thermoplastic-Methods of test for staining in contact with organic material
KS C IEC 60626-2-2015(2020) Combined flexible materials for electrical insulation－Part 2：Methods of test
KS C IEC 61189-2-2007(2017) Test methods for electrical materials, printed boards and other interconnection structures and assemblies－Part 2：Test methods for materials for interconnection structures
KS C IEC 61189-2-2007(2022) Test methods for electrical materials, printed boards and other interconnection structures and assemblies－Part 2：Test methods for materials for interconnection structures
KS K 0405-2021 Test method for coefficient of friction of yarn: Yarn to solid material
KS K ISO 10722:2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)
KS C IEC 61234-2:2002 Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
KS M ISO 3865-2010(2021) Rubber, vulcanized or thermoplastic－Methods of test for staining in contact with organic material
KS C IEC 60626-2:2003 Combined flexible materials for electrical insulation-Part 2:Methods of test
KS C IEC 60811-1-2:2002 Common test methods for insulating and sheathing materials of electric cables－Part 1：Methods for general application－Section 2：Thermal ageing methods
KS C 0254-12-2001(2011) Fire hazard testing Part 2：Test methods－ Section 1/sheet 2：Glowwire flammability test on materials
KS C IEC 61234-2-2002(2017) Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
KS C IEC 61234-2-2002(2022) Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
KS K 0828-2016 Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester

Professional Standard - Electricity, 2 Experimental materials and methods 2

DL/T 902-2004 Technical requirements and test methods of abrasion resistant refractory material

SE-SIS, 2 Experimental materials and methods 2

SIS 65 00 31-1959

American National Standards Institute （ANSI), 2 Experimental materials and methods 2

ANSI/ASTM D3345:1996 Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ANSI/ASTM F2875:2010 Guide for Laboratory Requirements Necessary to Test Commercial Cooking Appliances to ASTM Test Methods
ANSI N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (Institute for Nuclear Materials Management (INMM))
ANSI/ASTM E906:2010 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ANSI/NFSI B101.3-2012 Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials (Including Action and Limit Thresholds for the Suitable Assessment of the Measured Values)

American Society for Testing and Materials (ASTM), 2 Experimental materials and methods 2

ASTM D5051-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Benzothiazyl Disulfide (MBTS)&x2014;Assay
ASTM C461-81(2003) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM D3345-08 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM D3108-01 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D3108-95 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D3108/D3108M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM F607-03(2019) Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM D310-88 Standard test method for coefficient of friction between yarn and solid materials
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM D5744-18 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D3345-74(1999) Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM C461-81(2008) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM C461-81(2015) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM D7811-13 Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D5044-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
ASTM F1425-06(2011) Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
ASTM C1067-00(2007) Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
ASTM C1067-00 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D2512-95(2002) Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D2512-95 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D5744-07 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5819-99 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-21 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-18 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM E477-13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D3455-11(2019) Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
ASTM D2512-95(2008) Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D4445-23 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM F748-06 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D470-05 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D470-13 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D5051-06(2021)e1 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
ASTM D8036-16 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
ASTM C384-98 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ASTM C384-04(2022) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM D6704-01 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D3720-90(1999) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4289-03 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM C384-03 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ASTM C384-04 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM C384-04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM F748-06(2010) Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co₂TR) Through Barrier Materials Using An Infrared Detecto
ASTM D5044-06(2021) Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
ASTM D1670-98 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM C1519-02 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-02a Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D146-97 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM D146-97e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM F955-15(2021) Standard Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances

BE-NBN, 2 Experimental materials and methods 2

NBN-EN 28233-1992
NBN T 31-035-1985 Rubber, vulcanized - Methods of test for staining in contact with organic material
NBN-EN 348-1993 Protective clothing. Test method: Determination of behaviour of materials on impact of small splashes of molten metal

KR-KS, 2 Experimental materials and methods 2

KS F 2610-2022 Standard test method for carbon dioxide permeability for building materials
KS M ISO 4892-2-2017 Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps
KS K ISO 10722-2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)

ANSI - American National Standards Institute, 2 Experimental materials and methods 2

N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)

Standard Association of Australia （SAA）, 2 Experimental materials and methods 2

AS 5101.4:2008 Methods for preparation and testing of stabilized materials - Unconfined compressive strength of compacted materials
AS 1141.13:2007 Methods for sampling and testing aggregates - Material finer than 2 micrometer
AS 5101.5:2008 Methods for preparation and testing of stabilized materials - Absorption, swell and capillary rise of compacted materials
AS 1141.52:2008 Methods for sampling and testing aggregates - Unconfined cohesion of compacted pavement materials

Group Standards of the People's Republic of China, 2 Experimental materials and methods 2

T/CNTAC 4-2017 Testing method for coefficient of friction between yarn and solid material
T/CEEIA 437-2020 Standard Test Methods for Compatibility of Natural Ester Type Insulating Oil with Construction Material
T/CEEIA 436-2020 Test Method for Compatibility of Synthetic Organic Ester Type Insulating Oil and Construction Material

HU-MSZT, 2 Experimental materials and methods 2

MSZ 2989-1963

Anhui Provincial Standard of the People's Republic of China, 2 Experimental materials and methods 2

DB34/T 2987-2017 Experimental method for thermal physical properties of thermal insulation materials (constant temperature plane heat source method)

ES-AENOR, 2 Experimental materials and methods 2

UNE 104-281 Pt.2-3-1986
UNE 104-281 Pt.2-6-1986
UNE 104-281 Pt.2-4-1986
UNE 104-281 Pt.2-2-1986
UNE 104-281 Pt.2-1-1986
UNE-EN 302-2:1994 Adhesives for load-bearing timber structures. Test methods. Part 2: Determination of resistance to delamination (Laboratory method)
UNE-EN 2155-2:1994 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 2: Determination of water absorption
UNE 135-360-1994 Vertical road traffic signs. Signing of guiding traffic. Junction marker in the polymeric material. Characteristics, dimensions and test methods

European Association of Aerospace Industries, 2 Experimental materials and methods 2

AECMA PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size Edition P 2; ASTM E112:1996

Professional Standard - Aviation, 2 Experimental materials and methods 2

HB 5477-1991 Rapid test method for contact corrosion of non-metallic and metallic materials
HB 7655-1999 Forced non-resonant test method for dynamic mechanical properties of plastics and composites
HB 5434.10-2004 Test methods for aircraft wheel friction materials-Part 10:Inspection method for bonding ability between friction material and steel base and plasticity of steel base
HB 7736.2-2004 Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area

International Electrotechnical Commission (IEC), 2 Experimental materials and methods 2

IEC 61189-2/COR1:1997 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
IEC 61189-2:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
IEC 61189-2/AMD1:2000 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures; Amendment 1
IEC 60672-2:1999 Ceramic and glass insulating materials - Part 2: Methods of test
IEC 60371-2:1987 Specification for insulating materials based on mica. Part 2 : Methods of test
IEC 60371-2:2004 Specification for insulating materials based on mica - Part 2: Methods of test
IEC 60672-2:1980 Specification for ceramic and glass insulating materials. Part 2 : Methods of test
IEC 60626-2:1995 Combined flexible materials for electrical insulation - Part 2: Methods of test
IEC 60626-2:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test
IEC 60371-2/AMD1:1994 Specification for insulating materials based on mica - Part 2: Methods of test; Amendment 1
IEC 60626-2:1978 Specification for combined flexible materials for electrical insulation. Part 2 : Methods of test

国家市场监督管理总局、中国国家标准化管理委员会, 2 Experimental materials and methods 2

GB/T 16422.2-2022 Plastics—Methods of exposure to laboratory light sources—Part 2: Xenon-arc lamps
GB/T 20671.6-2020 Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces
GB/T 13477.2-2018 Test method for building sealants－Part 2：Determination of density
GB/T 40398.2-2021 Test method for C-C composites—Part 2: Flexural properties

未注明发布机构, 2 Experimental materials and methods 2

BS EN 2002-2:2005(2010) Metallic materials — Test methods — Part 2 : Tensile testing at elevated temperature
DIN EN ISO 4892-2:2006 Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps (ISO 4892-2:2006)
YY 0127.8-2001 Biological evaluation of oral materials. Unit 2: Biological testing methods of oral materials. Subcutaneous implantation test
YY 0127.6-1999 Biological evaluation of oral materials. Unit 2: Biological testing methods of oral materials. Manifest lethality test
BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
DIN EN 46-2:2006 Wood preservatives! Determination of the preventive effect against Hylotrupes bajulus (Linnaeus)! Part 2: Ovicidal effect (laboratory method)
BS EN 14532-2:2004(2009) Welding consumables - Test methods and quality requirements - Part 2 : Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
GJB 1038.2A-2004 Nondestructive testing methods for fiber reinforced composite materials Part 2 Radiographic testing

Professional Standard - Nuclear Industry, 2 Experimental materials and methods 2

EJ/T 20198-2018 Preparation method of emergency response plan for physical protection of nuclear materials and nuclear facilities

JSAE - Society of Automotive Engineers of Japan@ Inc., 2 Experimental materials and methods 2

JASO M344-1992 Compatibility test method of automotive gear oil with rubber seal materials
JASO M357-2001 Road vehicles - Test method for compatibility of automatic transmission fluids with wet friction materials

Japanese Industrial Standards Committee (JISC), 2 Experimental materials and methods 2

JIS K 7350-2:1995 Plastics -- Methods of exposure to laboratory light sources Part 2: Xenon-arc sources
JIS C 60695-2-12:2013 Fire hazard testing.Part 2-12: Glowing/hot-wire based test methods.Glow-wire flammability index (GWFI) test method for materials
JIS C 60695-2-13:2013 Fire hazard testing.Part 2-13: Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials
JIS K 7350-2:2008 Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps
JIS R 2251-2:2007 Test methods for thermal conductivity of refractory materials -- Part 2: Hot-wire method (parallel)
JIS R 1650-2:2002 Testing method for fine ceramics thermoelectric materials Part 2: Resistivity
JIS C 0074:1997 Fire hazard testing Part 2: Test methods -- Section 1/sheet 2: Glow-wire flammability test on materials
JIS K 6953-2:2010 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
JIS A 1451 AMD 2:2013 Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact) (Amendment 2)

IN-BIS, 2 Experimental materials and methods 2

European Committee for Electrotechnical Standardization（CENELEC）, 2 Experimental materials and methods 2

EN 60371-2:2004 Specification for insulating materials based on mica - Part 2: Methods of test
EN 60626-2:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test
HD 426.2 S1-1988 Specification for Ceramic and Glass Insulating Materials - Part 2: Methods of Test
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2: Test methods for materials for interconnection structures
EN 61234-2:1998 Electrical Insulating Materials Methods of Test for Hydrolytic Stability Part 2: Moulded Thermosets
EN 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing

Professional Standard - Medicine, 2 Experimental materials and methods 2

YY/T 0127.4-1998 Biological evaluation of dental materials.Unit2:Biological evaluation method of dental materials.Bone implant test
YY/T 0127.5-1999 Biological evaluation of dental materials.Unit 2:Biological test methods of dental materials.Inhalation toxicity test
YY/T 0127.6-1999 Biological evaluation of dental materials.Unit 2:Biological test methods of dental materials.Dominant lethal test
YY/T 0127.8-2001 Biological evaluation of dental materials.Part 2:Biological evaluation test method of dental materials.Subcutaneous implant test
YY/T 0127.3-1998 Biological evaluation of dental materials.Unit 2:Biological evaluation method of dental materials。Endodontic usage test
YY/T 0127.7-2001 Biological evaluation of of dental materials.Part 2:Biological evaluation test method of dental materials.Pulp and dentine usage test
YY/T 0698.2-2009 Packaging materials for terminal sterilized medical devices.Part 2:Sterilization wrap.Requirements and test methods
YY/T 0127.9-2001 Biological evaluation of dental materials.Part 2:Biological evaluation test method of dental materials.Cytotoxicity tests:Agar diffusion test and filter dissusion test

NZ-SNZ, 2 Experimental materials and methods 2

NZS/AS 1530.2-1993 Methods for Fire Tests on Building Materials, Components and Structures Part 2: Test for Flammability of Materials

Professional Standard - Aerospace, 2 Experimental materials and methods 2

QJ 10014.2-2011 Space systems.Safety and compatibility of materials.Part 2:Determination of flammability of electrical-wire insulation and accessory materials

ZA-SANS, 2 Experimental materials and methods 2

SANS 4892-2:2008 Plastics - Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps

IT-UNI, 2 Experimental materials and methods 2

UNI EN ISO 4892-2:2021 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
UNI 7538-1976

国家药监局, 2 Experimental materials and methods 2

YY/T 1777-2021 Technical requirements and test methods for male condoms made of synthetic materials
YY/T 0698.2-2022 Packaging materials for terminally sterilized medical devices Part 2: Requirements and test methods for sterilization packaging materials

VN-TCVN, 2 Experimental materials and methods 2

TCVN 6530-2-1999 Refractories.Methods of test.Part 2: Determination of true density
TCVN 6614-1-2-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-2: Methods for general application.Thermal ageing methods
TCVN 7190-2-2002 Refractories.Method for sampling.Part 2: Sampling and acceptance testing of shape products

Canadian General Standards Board （CGSB), 2 Experimental materials and methods 2

CGSB 1-GP-71 METH 98.3-1982 Methodes D'Essai Des Peintures Et Pigments Revetement Des Plaques En Metal Et En Verre Aux Fins D'Essai

ES-UNE, 2 Experimental materials and methods 2

UNE-EN ISO 14855-2:2019 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (IS...
UNE-EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.
UNE-ISO 3865:2016 Rubber vulcanized or thermoplastic. Methods of test for staining in contact with organic material
UNE-EN IEC 61189-2-807:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-807: Test methods for materials for interconnection structures - Decomposition temperature (T<sub>d</sub>) using TGA (Endorse...
UNE-EN 2002-002:2005 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature (Endorsed by AENOR in February of 2006.)
UNE-EN 1186-2:2023 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils

CENELEC - European Committee for Electrotechnical Standardization, 2 Experimental materials and methods 2

EN 60626-2:1995 Combined Flexible Materials for Electrical Insulation - Part 2: Methods of Test
EN 61189-2:1997 Test Methods for Electrical Materials@ Printed Boards and Other Interconnection Structures and Assemblies - Part 2: Test Methods for Materials and Interconnection Structures (Incorporates Amendment A1: 2000; Incorporating Corrigendum August 1997)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, 2 Experimental materials and methods 2

GB/T 5591.2-2017 Combined flexible materials for electrical insulation—Part 2: Methods of test
GB/T 13477.19-2017 Test method for building sealants—Part 19：Determination of change in mass and volume

The American Road & Transportation Builders Association, 2 Experimental materials and methods 2

AASHTO HM-28 PT II TOC-2008 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II Tests

Professional Standard - Commodity Inspection, 2 Experimental materials and methods 2

SN/T 1492-2015 Standard practice for laboratory bias evaluation using single test result from standard material
SN/T 1492-2004 Standard practice for laboratory bias evaluation using single test result from standard material

CZ-CSN, 2 Experimental materials and methods 2

CSN 64 5464-1978 Cellulav plastics and cellular rubber atcrials. Laboratory method of test to ssess the horizontál burning haracleristics

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, 2 Experimental materials and methods 2

PREN 2002-2-1996 Aerospace Series Test Methods for Metallic Materials Part 2: Tensile Testing at Elevated Temperature (Edition P 2)
PREN 2002-7-1998 Aerospace Series Metallic Materials Test Methods Part 7: Hardness Test (Edition P 2)
PREN 6072-2008 Aerospace series Metallic materials — Test methods Constant amplitude fatigue testing (Edition P 2)
PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)

Liaoning Provincial Standard of the People's Republic of China, 2 Experimental materials and methods 2

DB21/T 2072-2013 Preparation of reagents for chemical analysis of aluminum silicate refractory materials Sample decomposition and gravimetric determination of silicon dioxide

Aerospace, Security and Defence Industries Association of Europe (ASD), 2 Experimental materials and methods 2

ASD-STAN PREN 4050-2-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 2: Performance of Test (Edition P 1)

Society of Automotive Engineers (SAE), 2 Experimental materials and methods 2

SAE J1637-1993 Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar, Recommended Practice February 1993

RO-ASRO, 2 Experimental materials and methods 2

STAS SR EN 152-2-1995 Test methods for wood preservatives; Laboratory method for determining the protective ef fectiveness of a preservative treatment against blue stain in service; Part 2: Application by rnethods other than brushing

TH-TISI, 2 Experimental materials and methods 2

TIS 2510.2-2010 Determination of the ultimate aerobic biodegradability of plastic materials under controlled compostesfg conditions.method by analysis of evolved carbon dioxide.part 2: gravimetric measurement of carbon dioxide evolved in a laboratory.scale test