ZH
RU
ES

Ultrasonic technology abroad

Ultrasonic technology abroad, Total:294 items.

In the international standard classification, Ultrasonic technology abroad involves: Hand-held tools, Welding, brazing and soldering, Surface treatment and coating, Rotating machinery, Photography, Industrial automation systems, Acoustics and acoustic measurements, Medical equipment, Non-destructive testing, Gas and steam turbines. Steam engines, Power stations in general, Testing of metals, Optics and optical measurements, Measurement of fluid flow, Construction materials, Agricultural machines, implements and equipment, Electrical engineering in general, Optical equipment, Environmental protection, Power transmission and distribution networks, Electrical accessories, Plastics, Vocabularies, Linear and angular measurements, Services, Ceramics, Reinforced plastics, Terminology (principles and coordination), Fasteners, Road vehicle systems, Materials for aerospace construction, Aerospace engines and propulsion systems, Hydraulic construction, Equipment for entertainment.

HU-MSZT, Ultrasonic technology abroad

MSZ KGST 580-1977

RU-GOST R, Ultrasonic technology abroad

GOST R 50664-1994 Apparatus ultrasonic technological. Working frequencies
GOST 25052-1987 Apparatus for ultrasonic therapeutics. General specifications
GOST R 55614-2013 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST 25053-1987 Emitters of apparatus for ultrasonic therapeutics. General specifications
GOST R 56187-2014 Technical diagnostics. Ultrasonic monitoring of steel overheating sheets. General requirements
GOST R ISO 17640-2016 Non-destructive testing of weld. Ultrasonic testing. Techniques, testing levels and assessment
GOST R 8.584-2001 State system for ensuring the uniformity of measurements. Medical ultrasonic equipment. Devices of extracorporal lithotripsy. General requirements for acoustic output performance declaration and measurement procedures
GOST R IEC 61157-2008 State system for ensuring the uniformity of measurements. Medical electrical equipment. Devices for ultrasonic diagnostics. Requirements for the declaration of acoustic output parameters in technical documents
GOST R 56183-2014 Aviation engines and engine components. Ultrasonic cleaning of critical engine construction elements. Standard technologic procedures
GOST R 51657.5-2002 Water flow measurement in hydromelioration and water sypply systems. Manner of measurement of water discharge using the ultrasonic (acoustic) velocity meters. General technical requirements
GOST 21397-1981 Non-destructive testing. Set of standard samples for ultrasonic testing semi-finished and aluminium alloy products. Specifications

Group Standards of the People's Republic of China, Ultrasonic technology abroad

T/CASME 525-2023 Technical requirements for ultrasonic plastic welding
T/SHZSAQS 00116-2022 Ultrasonic Thickness Gauge Operating Technical Regulations
T/CEC 555-2021 Technical Specifications for Partial Discharge Ultrasonic Detector
T/CSEE 0227-2021 Ultrasonic, ultraviolet and infrared joint detection device technical specification
T/KCH 001-2022 Technical requirements for ultrasonic welding of construction machinery harness
T/SHZSAQS 00118-2022 Digital Ultrasonic Flaw Detector Operating Technical Regulations
T/SSM 3-2021 Technical specification for automatic verification equipment of ultrasonic water meter
T/CEC 357-2020 General technical specification for flashover locator based on ultrasonic method
T/SMA 0017-2021 The technical codes of electromagnetic ultrasonic guided wave testing of stay wires for power towers
T/YNBX 067-2022 Technical specification for arsenic removal from polluted acid in copper, lead and zinc smelting production Ultrasonic method
T/CSEE 0115-2019 Technical specifications for ultrasonic detectors for inspection of overhead distribution lines
T/CSEE 0335-2022 Technical Guidelines for Ultrasonic Surface Wave Detection of Small-diameter Pipes in Dense Pipe Discharge in Power Stations
T/SMA 0002-2019 Technical specification for electromagnetic ultrasonic guided wave detection of energy storage spring of circuit breaker operating mechanism

Professional Standard - Machinery, Ultrasonic technology abroad

JB/T 10755-2007 UItrasonic motor, General specification for
JB/T 6850-1993 Ultrasonic film splicer for microphotography
JB/T 10326-2002 Ultrasonic testing standard for retaining ring in-service
JB/T 5093-1991 Specifications for Ultrasonic Flaw Detection of Friction Welded Valves of Internal Combustion Engines
JB/T 10061-1999 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique

国家市场监督管理总局、中国国家标准化管理委员会, Ultrasonic technology abroad

GB/T 38615-2020 General specification of ultrasonic levelmeter
GB/T 38337-2019 General specification for ultrasonic motor and driver

工业和信息化部/国家能源局, Ultrasonic technology abroad

JB/T 10755-2017 General technical conditions for ultrasonic motors

Korean Agency for Technology and Standards (KATS), Ultrasonic technology abroad

KS B 0536-1995 Methods for measurement of thickness by ultrasonic pulse echo technique
KS B ISO 16823:2022 Non-destructive testing — Ultrasonic testing —Transmission technique
KS B 0536-2021 Measurement of thickness by ultrasonic pulse-echo technique
KS B 0537-1995 Methods for assessing the electrical characteristics of ultrasonic testing instrument using pulse echo technique
KS B 0817-2016 General rule of ultrasonic testing of metals by pulse echo technique
KS B 0817-2021 General rules for ultrasonic testing of metals by pulse echo technique
KS B 0817-1986 General rules for ultrasonic testing of metals by pulse echo technique
KS B 0532-1995 Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique
KS B ISO 17640:2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
KS B 0532-2005(2010) Method for measurement of ultrasonic attenuationcoefficient of solid by pulse echo technique
KS B 0537-2021 Methods for evaluating electronic characteristics of ultrasonic test instruments
KS B 0544-2021 Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds
KS B ISO 13588:2015 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
KS B ISO 13588:2019 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
KS B ISO 16828:2014 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
KS B ISO 10863:2019 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique(TOFD)
KS B ISO 20601:2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B 0544-2005 Standard qualification procedure for ultrasonic testingtechnique of aluminium and aluminium alloy welds
KS B ISO 16828:2019 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

CZ-CSN, Ultrasonic technology abroad

CSN 34 0875-1988 Ultrasonic cleaning equipment. General technical requirements
CSN 36 4862-1982 Linear diagnostic ultrasonio devices with echo pulses. Types. Technical requirements. Testing methods

Association Francaise de Normalisation, Ultrasonic technology abroad

NF A09-334*NF EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
NF EN ISO 16823:2014 Essais non destructifs - Contrôle par ultrasons - Technique par transmission
NF A09-340-3:1997 Non-destructive testing. Ultrasonic examination. Part 3 : transmission technique.
NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
NF A89-520*NF EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
NF A89-517*NF EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
NF EN ISO 17640:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Techniques, niveaux d'essai et évaluation
NF EN ISO 19285:2017 Essais non destructifs des assemblages soudés - Technique ultrasons multi-éléments (PAUT) - Niveaux d'acceptation
NF A09-337*NF EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
NF A89-524*NF EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
NF A89-512:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
NF EN ISO 13588:2019 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés
NF EN ISO 17405:2022 Essais non destructifs - Contrôle par ultrasons - Technique d'essai des placages produits par soudage, laminage et explosion
NF EN ISO 10863:2020 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique de diffraction des temps de vol (TOFD)
NF A09-024:2021 Non-destructive testing - Ultrasonic testing - General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
NF ISO 23865:2021 Essais non destructifs - Contrôle par ultrasons - Utilisation générale de l'acquisition de la matrice intégrale/technique de focalisation en tous points (FMC/FTP) et de techniques associées
NF EN ISO 23864:2021 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique d'acquisition automatisée de focalisation en tout point (FTP) et de techniques associées
NF A09-327*NF EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion
NF B43-354*NF EN 14186:2008 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
NF A89-514*NF EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
NF EN ISO 4761:2022 Essais non destructifs des assemblages soudés - Technique ultrasons multi-éléments (UT-PA) pour les composants en acier à paroi mince - Niveaux d'acceptation
NF C97-913-1/A1*NF EN 61391-1/A1:2017 Ultrasonics - Pulse-echo scanners - Part 1 : techniques for calibrating spatial measurement systems and measurement of system point-spread function response
NF EN ISO 20601:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés pour les composants en acier à paroi mince
NF EN 61391-1/A1:2017 Ultrasons - Scanners à impulsion et écho Partie 1 : techniques pour l'étalonnage des systèmes de mesure spatiaux et des mesures de la réponse de la fonction de dispersion ponctuelle du système
NF A09-313*NF EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
NF EN 17290:2021 Essais non destructifs - Contrôle par ultrasons - Examen de la perte d'épaisseur due à l'érosion et/ou à la corrosion par la technique TOFD
NF EN ISO 16828:2014 Essais non destructifs - Contrôle par ultrasons - Technique de diffraction du temps de vol utilisée comme méthode de détection et de dimensionnement des discontinuités
NF EN 61391-1:2007 Ultrasons - Scanners à impulsion et écho - Partie 1 : techniques pour l'étalonnage des systèmes de mesure spatiaux et des mesures de la réponse de la fonction de dispersion ponctuelle du système
NF A09-340-6:2009 Non-destructive testing - Ultrasonic examination - Part 6 : time-of-flight diffraction technique as a method for detection and sizing of discontinuities.

European Committee for Standardization (CEN), Ultrasonic technology abroad

prEN ISO 16823 rev Non-destructive testing — Ultrasonic testing — Transmission technique
EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
EN 583-3:1997 Non-Destructive Testing - Ultrasonic Examination - Part 3: Transmission Technique
CWA 17454:2019 Bionic Aircraft - Quality control of metal ALM parts using the Ultrasonic Technique
prEN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
DD ENV 583-6-2000 Non-Destructive Testing - Ultrasonic Examination - Part 6: Time-Of-Flight Diffraction Technique as a Method for Detection and Sizing of Discontinuities
prEN ISO 17405:2021 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO/DIS 17405:2021)
EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
prEN ISO 16828 rev Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

KR-KS, Ultrasonic technology abroad

KS B ISO 16823-2022 Non-destructive testing — Ultrasonic testing —Transmission technique
KS B 0817-2016(英文版) General rule of ultrasonic testing of metals by pulse echo technique
KS B ISO 17640-2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
KS B ISO 13588-2019 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
KS B ISO 10863-2019 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique(TOFD)
KS B ISO 20601-2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B ISO 16828-2019 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

German Institute for Standardization, Ultrasonic technology abroad

DIN EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN EN ISO 16823:2014-07 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN 58747-4:1982 Production in optical engineering; ultrasonic cleaning machines; handle for racks
DIN 58747-2:1982 Production in optical engineering; ultrasonic cleaning machines; racks, fixed form
DIN EN 583-3:1997 Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997
DIN 58747-1:1982 Production in optical engineering; ultrasonic cleaning machines; areas for cleaning tanks
DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
DIN 58747-2:2015 Production in optical engineering - Ultrasonic cleaning machines - Part 2: Racks, fixed form
DIN 58747-4:2015 Production in optical engineering - Ultrasonic cleaning machines - Part 4: Handles for racks
DIN 58747-1:2015 Production in optical engineering - ultrasonic cleaning machines - Part 1: Areas for cleaning tanks
DIN EN ISO 10863:2020-09 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020); German version EN ISO 10863:2020
DIN EN 62127-1 Berichtigung 1:2009 Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz (IEC 62127-1:2007); German version EN 62127-1:2007, Corrigendum to DIN EN 62127-1:2008-06
DIN EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
DIN EN ISO 17640:2019-02 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018); German version EN ISO 17640:2018
DIN EN ISO 23864:2022-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021); German version EN ISO 23864:2021
DIN EN 61157 Berichtigung 1:2009 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157:2007); German version EN 61157:2007, Corrigendum to DIN EN 61157:2008-07
DIN EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
DIN EN ISO 17405:2022-08 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022); German version EN ISO 17405:2022
DIN EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
DIN EN ISO 20601:2019-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018); German version EN ISO 20601:2018
DIN EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
DIN EN 61391-1:2018-09 Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response (IEC 61391-1:2006 + A1:2017); German version EN 61391-1:2006 + A1:2017 / Note: DIN EN 61391-1 (2...
DIN EN 17290:2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German and English version prEN 17290:2018
DIN EN 14186:2008 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique; English version of DIN EN 14186:2008-02
DIN EN ISO 20601:2017 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for steel components with small wall thickness (ISO/DIS 20601:2017); German and English version prEN ISO 20601:2017
DIN EN 17290:2021-12 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German version EN 17290:2021
DIN EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012); German version EN ISO 16828:2014
DIN EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010); German version EN ISO 17640:2010
DIN EN ISO 13588:2013 Non-destructive testing of welds.Ultrasonic testing.Use of automated phased array technology (ISO 13588:2012); German version EN ISO 13588:2012
DIN EN ISO 16828:2014-06 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012); German version EN ISO 16828:2014
DIN EN 583-6:2009 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities; English version of DIN EN 583-6:2009-03
DIN EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German version EN 17290:2021
DIN EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014); German version EN ISO 17405:2014
DIN 15905-1:1998 Soundtechnique in theatres and multi-purpose halls - Part 1: Requirements for own productions, co-productions and foreign productions

British Standards Institution (BSI), Ultrasonic technology abroad

BS EN ISO 16823:2014 Non-destructive testing. Ultrasonic testing. Transmission technique
BS 8452:2010 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide
22/30439260 DC BS ISO 4773. Non-destructive testing. Method. Ultrasonic guided wave inspection using phased array technique
BS EN 583-3:1997 Non-destructive testing - Ultrasonic examination - Transmission technique
BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS ISO 4773:2023 Non-destructive testing. Ultrasonic guided-wave testing using the phased-array technique
BS ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 13588:2012 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS EN ISO 16828:2014 Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
BS EN ISO 10863:2020 Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS ISO 23865:2021 Non-destructive testing. Ultrasonic testing. General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
18/30373433 DC BS ENISO 10863. Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN ISO 13588:2019 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS EN ISO 17640:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
DD ENV 14186-2002 Advanced technical ceramics - Ceramic composites - Mechanical properties at room temperature, determination of elastic properties by an ultrasonic technique
BS ISO 16232-4:2007 Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by ultrasonic techniques
BS EN 61391-1:2006+A1:2017 Ultrasonics. Pulse-echo scanners - Techniques for calibrating spatial measurement systems and measurement of system point-spread function response
BS M 36:1970 Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
BS EN ISO 17405:2014 Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
20/30393141 DC BS ISO 23865. Non-destructive testing. Ultrasonic testing. General use of full matrix capture / total focusing technique (FMC/TFM)
PD IEC TS 63070:2019 Ultrasonics. Field characterization. Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air
21/30438200 DC BS EN ISO 17405. Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
BS EN ISO 20601:2018 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thin-walled steel components
BS EN 17290:2021 Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
BS EN ISO 17405:2022 Tracked Changes. Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
20/30392796 DC BS ISO 23864. Non-destructive testing of welds. Ultrasonic testing. Use of (semi-) automated full matrix capture / total focusing technique (FMC/TFM)
BS EN 14186:2007 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
18/30376856 DC BS EN 17290. Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
BS EN ISO 18610:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique
BS DD ENV 583-6:2000 Non-destructive testing - Ultrasonic examination - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

Professional Standard - Railway, Ultrasonic technology abroad

TB/T 2634-1995 Specifications for Ultrasonic Flaw Detection Probes for Rails
TB/T 2340-2000 Technical conditions of multi-channel A-type display rail ultrasonic flaw detector
TB/T 2047.3-2011 Technical specification for materials used for non-destructive testing in railway.Part 3:Probes for ultrosonic testing

International Organization for Standardization (ISO), Ultrasonic technology abroad

ISO/CD 16823:2011 Non-destructive testing — Ultrasonic testing — Through-transmission technique
ISO 16823:2012 Non-destructive testing - Ultrasonic testing - Transmission technique
ISO/FDIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
ISO/DIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
ISO 4773:2011 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 13588:2019 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
ISO 16828:2012 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
ISO 17405:2022 Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
ISO 10863:2020 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
ISO 23865:2021 Non-destructive testing -- Ultrasonic testing -- General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
ISO/CD 8203-2:2023 Fibre-reinforced plastics — Non-destructive inspection techniques — Part 2: Phased array and air coupled ultrasonics
ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion
ISO 20601:2018 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components

Professional Standard - Electricity, Ultrasonic technology abroad

DL/T 714-2000 Technical guide for the ultrasonic testing of turbine-blades
DL/T 714-2011 Technical guide for the ultrasonic testing of turbine-blades
DL/T 820-2002 The code of ultrasonic inspection section for butt welds of pipes
DL/T 694-1999 The technical guide of ultrasonic inspection for high-temperature tight bolts
DL/T 1423-2015 Technical Guidelines for Ultrasonic Testing of Protective Rings of Generators in Service
DL/T 1416-2015 General technical specifications for ultrasonic based partial discharge tester
DL/T 930-2005 Technical guide of the ultrasoic testing of turbine nonbore rotors
DL/T 820.1-2020 Technical Regulations for Ultrasonic Testing of Pipe Welded Joints Part 1: General Technical Requirements
DL/T 303-2014 Ultrasonic inspection for the trut porcelain insulator and borcelain bushing used in the grid system
DL/T 2362-2021 Technical Guidelines for Ultrasonic Testing of Bellows for Pipeline Expansion Joints in Thermal Power Plants
DL/T 820.4-2020 Technical regulations for ultrasonic testing of pipe welded joints Part 4: In-service testing
DL/T 820.3-2020 Technical regulations for ultrasonic testing of pipe welded joints Part 3: Diffraction time-of-flight method
DL/T 5048-1995 Technical code for erection and acceptance of electric power construction-Ultrasonic test section
DL/T 5048-1995（条文说明） Technical Specifications for Construction and Acceptance of Electric Power Construction (Ultrasonic Inspection of Pipeline Welded Joints)
DL/T 820.2-2019 Technical regulations for ultrasonic testing of pipe welded joints Part 2: Type A pulse reflection method

International Electrotechnical Commission (IEC), Ultrasonic technology abroad

IEC 62127-2:2007/COR1:2008 Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz; Corrigendum 1
IEC 62127-1:2007/COR1:2008 Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz; Corrigendum 1
IEC 61391-1:2006+AMD1:2017 CSV Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of point-spread function response
IEC TS 63070:2019 Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air

AENOR, Ultrasonic technology abroad

UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
UNE-EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
UNE-EN ISO 13588:2013 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
UNE-EN ISO 10863:2012 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)
UNE-EN ISO 17405:2015 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014)
UNE-EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)

Guangxi Provincial Standard of the People's Republic of China, Ultrasonic technology abroad

DB45/T 2563-2022 Technical specification for ultrasonic testing of concrete filled steel tubes for arch bridges

农业农村部, Ultrasonic technology abroad

NY/T 3882-2021 Technical specifications for quality evaluation of seed ultrasonic processors

Danish Standards Foundation, Ultrasonic technology abroad

DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
DS/EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
DS/EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
DS/ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies
DS/EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
DS/ISO 23865:2021 Non-destructive testing – Ultrasonic testing – General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
DS/EN 14186:2008 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
DS/EN 61391-1:2007 Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response
DS/EN 17290:2021 Non-destructive testing – Ultrasonic testing – Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
DS/EN 583-6:2009 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

Lithuanian Standards Office , Ultrasonic technology abroad

LST EN 583-3-2000 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique
LST EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
LST EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
LST EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)
LST EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)
LST EN 14186-2008 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
LST EN 61391-1-2007 Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response (IEC 61391-1:2006)
LST EN 583-6-2009 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
LST EN ISO 18610:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016)

American Society for Testing and Materials (ASTM), Ultrasonic technology abroad

ASTM E1816-96(2002) Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E1816-07 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E1962-09 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E2373/E2373M-19 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM E1816-96 Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E1685-20 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
ASTM D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM G131-96(2023)e1 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM G131-96(2016) Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM E1962-19 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM C1332-18 Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM C1332-96 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM C1332-01(2013) Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM E1685-13 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
ASTM E1685-00(2006) Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
ASTM E1685-00 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

Professional Standard - Environmental Protection, Ultrasonic technology abroad

HJ/T 366-2007 Technical requirement for environmental protection products. Ultrasonic pipe flowmeters
HJ 15-2019 Ultrasonic open channel sewage flowmeter technical requirements and testing methods
HJ/T 15-2007 Technical requirement for environmental protection product. Supersonic flowmeters of wastewater

Professional Standard - Coal, Ultrasonic technology abroad

MT 448-1995 Technical conditions of ultrasonic vortex wind speed sensor for coal mine

国家能源局, Ultrasonic technology abroad

NB/T 10210-2019 Technical specification for ultrasonic wind speed and direction meter for wind turbines

Japanese Industrial Standards Committee (JISC), Ultrasonic technology abroad

JIS Z 2354:1992 Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique
JIS K 7090:1996 Testing method for ultrasonic pulse echo technique of carbon fibre reinforced plastic panels
JIS Z 2351:1992 Method for assessing the electrical characteristics of ultrasonic testing instrument using pulse echo technique
JIS Z 3871:1987 Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds

American Welding Society (AWS), Ultrasonic technology abroad

WRC 185:1973 Improved Discontinuity Detection Using Computer-Aided Ultrasonic Pulse-Echo Techniques

Shandong Provincial Standard of the People's Republic of China, Ultrasonic technology abroad

DB37/T 2444-2013 General technical requirements for automatic ultrasonic welding machine for combined bottle caps

ES-UNE, Ultrasonic technology abroad

UNE-EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
UNE-EN ISO 23864:2022 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
UNE-EN ISO 10863:2021 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
UNE-EN ISO 17405:2022 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
UNE-EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
UNE-EN 61391-1:2006/A1:2017 Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response (Endorsed by Asociación Española de Normalización in January of 2018.)
UNE-EN 17290:2022 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
UNE-EN 61391-1:2006 Ultrasonics - Pulse-echo scanners -- Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response (IEC 61391-1:2006). (Endorsed by AENOR in March of 2007.)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultrasonic technology abroad

GB/T 50818-2013 Mechanized ultrasonic testing technology specification for oil & gas construction pipeline project

API - American Petroleum Institute, Ultrasonic technology abroad

API H00008-2002 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology (First Edition)
API RP 2X-1996 Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians
API RP 2X-2004 Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians (Fourth Edition)
API MPMS 5.8-2005 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology (First Edition)

未注明发布机构, Ultrasonic technology abroad

BS EN ISO 23864:2021(2022) Non - destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
DIN EN ISO 23864:2022 Non-destructive testing of welded joints – Ultrasonic testing – Use of the automated total focusing method (TFM) and related technologies (ISO 23864:2021)
DIN EN ISO 17640:2018 Non-destructive testing of welded joints – Ultrasonic testing – Techniques, test classes and evaluation (ISO 17640:2017); German version EN ISO 17640:2017

Professional Standard - Medicine, Ultrasonic technology abroad

YY/T 91089-1999 Element pulse-echo ultrasonic transducer.General specifications and measuring method
YY/T 0748.1-2009 Ultrasonics.Pulse-echo scanner.Part 1:Techniques for calibrating spatial measurement systems and measurement of system point-spread function response

Professional Standard - Ferrous Metallurgy, Ultrasonic technology abroad

YB/T 036.10-1992 Ultrasonic flaw detection method for steel forgings in general technical conditions for metallurgical equipment manufacturing

PL-PKN, Ultrasonic technology abroad

PN-EN ISO 17640-2019-01 P Non-destructive testing of welds -- Ultrasonic testing -- Techniques, testing levels, and assessment (ISO 17640:2018)
PN-EN ISO 10863-2020-12 E Non-destructive testing of welds -- Ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
PN-EN ISO 18610-2021-06 E Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure -- Determination of elastic properties by ultrasonic technique (ISO 18610:2016)

WRC - Welding Research Council, Ultrasonic technology abroad

BULLETIN 185-1973 IMPROVED DISCONTINUITY DETECTION USING COMPUTER-AIDED ULTRASONIC PULSE-ECHO TECHNIQUES

US-FCR, Ultrasonic technology abroad

FCR COE CPAR-SL-98-1 FINAL REPORT-1998 TECHNOLOGIES FOR IMPROVING THE EVALUATION AND REPAIR OF CONCRETE BRIDGE DECKS: ULTRASONIC PULSE ECHO AND POLYMER INJECTION

AT-ON, Ultrasonic technology abroad

OENORM EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)

CEN - European Committee for Standardization, Ultrasonic technology abroad

EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
PREN 17290-2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique

IEC - International Electrotechnical Commission, Ultrasonic technology abroad

TS 63070-2019 Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air (Edition 1.0)

IT-UNI, Ultrasonic technology abroad

UNI EN ISO 18610:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique

Professional Standard - Navy, Ultrasonic technology abroad

HJB 399.8-2007 JL-1 Underground Strategic Missile Technology Position Support Equipment Repair Inspection and Acceptance Regulations Part 8: UT-1 Ultrasonic Automatic Flaw Detector

CH-SNV, Ultrasonic technology abroad

SN EN ISO 18610:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016)