ZH
RU
ES
Three-level inspection system
Three-level inspection system, Total:218 items.
In the international standard classification, Three-level inspection system involves: Photography, Inorganic chemicals, Organic chemicals, Analytical chemistry, Construction industry, Aircraft and space vehicles in general, Quality, Vocabularies, Farming and forestry, Protection against fire, Veterinary medicine, Paints and varnishes, Protection against crime, Sports equipment and facilities, Transport, Shipbuilding and marine structures in general, Elements of buildings, Structures of buildings, Thermodynamics and temperature measurements, Diagnostic, maintenance and test equipment, Linear and angular measurements, Applications of information technology, Software development and system documentation, Electricity. Magnetism. Electrical and magnetic measurements, Buildings, General methods of tests and analysis for food products, Radiation measurements, Equipment for petroleum and natural gas industries, Petroleum products in general, Lubricants, industrial oils and related products, Flexible drives and transmissions, Installations in buildings, Laboratory medicine, Products of the chemical industry, Aids for disabled or handicapped persons, Fluid power systems, Accident and disaster control, Road engineering, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Components for aerospace construction, Electrical wires and cables, Fuels, Equipment for the chemical industry, Fluid storage devices, Measurement of fluid flow, Testing of metals, Interface and interconnection equipment, Ceramics, Fibre optic communications.
Professional Standard - Commodity Inspection, Three-level inspection system
- SN/T 2992-2011 “THREE-IN-ONE” administrative system of law enforcement on inspection and quarantine
- SN/T 3200-2012 Specification for constructing diagrams of professional standard system of entry-exit inspection and quarantine
Taiwan Provincial Standard of the People's Republic of China, Three-level inspection system
- CNS 5388-1980 Method of Test for Benzotriazole (Photographic Grade)
- CNS 2480-1973 Method of Test for Chromium Trioxide (Technical Grade)
- CNS 4866-1979 Method of Test for Tricaesyl Phosphate (99% Grade)
- CNS 3338-1983 Method of Test for 1,1,1-Trichloroethane (Industrial Grade)
- CNS 12269-1994 Method of Test for Epoxy Resin Aluminum Tri - Polyphosphate Anticorrosive Primer
- CNS 12271-1994 Method of Test for Chlorinated Rubber Aluminum Tri - Polyphosphate Anticorrosive Primerer
- CNS 12267-1994 Method of Test for Alkyd Resin Aluminum Tri - Polyphosphate Anticorrosive Primer
API - American Petroleum Institute, Three-level inspection system
- API 570-2009 Piping Inspection Code: In-service Inspection@ Rating@ Repair@ and Alteration of Piping Systems (Third Edition)
- API 570 CHINESE-2009 Piping Inspection Code: In-service Inspection@ Rating@ Repair@ and Alteration of Piping Systems (Third Edition)
- API 510-1983 Pressure Vessel Inspection Code Maintenance Inspection@ Rating@ Repair@ and Alteration (THIRD EDITION)
- API RP 574 CHINESE-2009 Inspection Practices for Piping System Components (Third Edition)
- API RP 574-2009 Inspection Practices for Piping System Components (Third Edition)
- API IRE C14-1982 GUIDE FOR INSPECTION OF REFINERY EQUIPMENT CHAPTER XIV-ELECTRICAL SYSTEMS (THIRD EDITION)
- API 570-2016 Piping Inspection Code: In-service Inspection@ Rating@ Repair@ and Alteration of Piping Systems (FOURTH EDITION; Addendum 1: May 2017)
- API MPMS 4.3-1988 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 3 - Small Volume Provers (R 1993) First Edition
Hunan Provincial Standard of the People's Republic of China, Three-level inspection system
- DB43/T 1696-2019 Specifications for the construction of three-level logistics distribution system in counties and villages
Japanese Industrial Standards Committee (JISC), Three-level inspection system
- JIS K 1466:1995 Testing methods for hydrofluoric acid of semi-conductor grade
- JIS Z 9903:1998 Quality systems -- Model for quality assurance in final inspection and test
- JIS Z 9903:1994 Quality systems -- Model for quality assurance in final inspection and test
- JIS B 8377-2:2002 Fluid power systems and components -- Inspection and test of cylinders -- Part 2: Acceptance tests for hydraulic cylinders
Professional Standard - Nuclear Industry, Three-level inspection system
- EJ/T 502-1990 Liquid Penetration Inspection of 300MW PWR Nuclear Power Plant
Danish Standards Foundation, Three-level inspection system
- DS/EN 9102:2006 Aerospace series - Quality systems - First article inspection
- DS/EN ISO 7278-2:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
- DS/ISO/R 1938:1980 ISO-system of limits and fits. Inspection of plain workpieces
Lithuanian Standards Office , Three-level inspection system
AT-ON, Three-level inspection system
- ONORM B 6100-1998 External thermal insulating composite Systems with rendering - Test procedures for first and third party control
- ONORM EN 29003 Beib.1-1990 Quality systems; model for quality assurance in final inspection and test; trilingual index (de, en,fr)for ONORM EN 29003
- ONORM EN 29003-1990 Quality Systems; modelfor quality assurance in final inspection and test
- OENORM H 7510-3-2021 Checking of heating systems - Part 3: Comprehensive verification of firing systems for liquid and gaseous fuels
American Society of Mechanical Engineers (ASME), Three-level inspection system
- ASME SEC XI D3 MA APP III-2001 Appendix III Ultrasonic Examination of Class 1 and 2 Ferritic Steel Piping Systems
- ASME N-494-3-2001 Pipe Specific Evaluation Procedures and Acceptance Criteria for Flaws in Class 1 Ferritic Piping that Exceed the Acceptance Standards of IWB-3514.2 and in Class 1 Austenitic Piping that Exceed the Acceptance Standards of IWB-3514.3 Section XI
Sichuan Provincial Standard of the People's Republic of China, Three-level inspection system
- DB51/T 632-2007 Indica "three-line" hybrid rice seed field inspection regulations
Jiangsu Provincial Standard of the People's Republic of China, Three-level inspection system
- DB3205/T 1025-2021 Specifications for the construction of three-level government service systems in cities (districts), towns (streets), and villages (communities)
Liaoning Provincial Standard of the People's Republic of China, Three-level inspection system
- DB2101/T 0081-2023 Specifications for the Construction of a Three-Level Grid Supervision System for Agricultural Products Quality and Safety
国家质量监督检验检疫总局, Three-level inspection system
- SN/T 4326-2015 Entry and Exit Plant Inspection and Quarantine Standard System Table
- SN/T 4530-2016 Professional standard system for import and export food and cosmetics inspection
Professional Standard - Petroleum, Three-level inspection system
- SY/T 6553-2003 Piping inspection code Inspection,repair,alteration,and rerating of in-service piping systems
CZ-CSN, Three-level inspection system
- CSN 44 1406-1987 Groups of size classification of solid fuels and criteria of checking
Jilin Provincial Standard of the People's Republic of China, Three-level inspection system
- DB22/T 3035-2019 ELISA method for the detection of feline calicivirus antibody for ordinary experiments
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-level inspection system
- GB/T 38770-2020(英文版) Spheroidite examination and grading for [JP] low and medium carbon steels
- GB/T 23438-2009 Guideline of maintenance system survey for ship
- GB/T 15486-1995 Calibration and testing laboratory accreditation systems--General requirements for operation and recognition
- GB/T 19634-2005 In vitro diagnostic test systems.General technical requirements for blood-glucose monitoring systems for self-testing
- GB/T 25151.2-2010 Fabrication and inspection method for high pressure urea equipment.Part 2:Selective corrosion examination and metallography examination for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade
Hebei Provincial Standard of the People's Republic of China, Three-level inspection system
- DB13/T 5671-2023 Township (street) social work service station three-level system construction management specification
CN-STDBOOK, Three-level inspection system
- 图书 a-4637 CRH EMU Advanced Maintenance Quality System Guidelines and Cases
Professional Standard - Public Safety Standards, Three-level inspection system
- GA/T 116-2005 The diagrams of forensic image, phonetics & audio standard system
- GA/T 1687-2019 Forensic Science Document Inspection Standard System Table
German Institute for Standardization, Three-level inspection system
- DIN 79005:2017 Athletics - Horizontal jump disciplines - Requirements and test methods for long and triple jump
- DIN 1053-2:1996 Masonry - Part 2: Masonry strength classes on the basis of suitability tests
- DIN EN 9102:2022-08 Aerospace series - Quality systems - First Article Inspection Requirement; English version prEN 9102:2022 / Note: Date of issue 2022-07-15*Intended as replacement for DIN EN 9102 (2016-12).
- DIN EN 9102:2016-12 Aerospace series - Quality systems - First article inspection requirements; German and English version EN 9102:2015 / Note: To be replaced by DIN EN 9102 (2022-08).
- DIN EN 9102:2023-11 Aerospace series - Quality systems - First article inspection requirements; German version ASD-STAN prEN 9102:2023 / Note: Date of issue 2023-09-29*Intended as replacement for DIN EN 9102 (2016-12).
- DIN EN 9102:2007 Aeropace series - Quality systems - First article inspection; German and English version EN 9102:2006
- DIN 18147-1:1987 Building material and building elements for three-layered chimneys; discription, test and registration of chimney systems
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three-level inspection system
- PREN 9102-2004 Aerospace Series Quality Systems First Article Inspection (Edition P 2)
- PREN 9102-2001 Aerospace Series Quality Systems First Article Inspection (Edition P 1)
- PREN 9102-2014 Aerospace series Quality Systems First Article Inspection Requirement (Edition P 3)
- PREN 9102-2000 Aerospace Series Quality Systems First Article Inspection Requirements (Edition P1)
Professional Standard-Ships, Three-level inspection system
- CB/Z 125-2012 Inspection regulation of welding quality for submarine hull structure and quality classification
RU-GOST R, Three-level inspection system
- GOST R 8.779-2012 State system for ensuring the uniformity of measurements. Standards thermoelectric platinumrhodium/platinumrhodium converters of the first, second and third grades. Verification procedure
- GOST 8.547-1986 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring relative humidity of gases
- GOST R 8.772-2011 State system for ensuring the uniformity of measurements. Analytical liquid laboratory chromatographs. The method of verification
- GOST R ISO 9003-1996 Quality system. Model for quality assurance in final inspection and test
- GOST 8.145-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3·10 in minus 6 degree up to 10 m3/sec
- GOST R 51000.1-1995 Accreditation system of certification body testing and measuring laboratory. General requirements
- GOST R 8.611-2005 State system for ensuring the uniformity of measurements. Standard thermoelectric platinumrhodium/platinum converters of the first, the second and the third grades. Verification procedure
Professional Standard - Traffic, Three-level inspection system
- JT/T 336-1997 Directives of maintenance system and survey for ship
- JT/T 1165-2017 Automobile steering system inspection without disassembly
未注明发布机构, Three-level inspection system
ES-UNE, Three-level inspection system
- UNE-EN 9102:2016 Aerospace series - Quality systems - First article inspection requirements
Professional Standard - Special Equipment Specification, Three-level inspection system
- TSG Z7003-2004 Quality management system requirements for special equipment inspection and testing institutions
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-level inspection system
- GB/T 34890-2017 Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system
Ningxia Provincial Standard of the People's Republic of China, Three-level inspection system
- DB64/T 408-2017 Regulations for quality inspection and evaluation of gas fire extinguishing system
Aerospace, Security and Defence Industries Association of Europe (ASD), Three-level inspection system
Group Standards of the People's Republic of China, Three-level inspection system
- T/SHZSAQS 00114-2022 Construction of quality management system for special equipment inspection and testing institutions
- T/CAQI 101-2020 Coal laboratory information management system — General framework and system functions
- T/CQAE 11006-2018 Index System and Inspection Method of Internet of Things Information Database System
- T/SHZSAQS 00115-2022 Construction of occupational health and safety management system for special equipment inspection and testing institutions
- T/CCGA 60004-2022 Safety technical rule of periodic inspection cylinders for gases fire extinguishing system
- T/CCGA 60001-2019 Periodic inspection and evaluation of seamless steel gas cylinder for gas fire extinguishing system
- T/CCGA 60002-2019 Periodic inspection and evaluation of steel welded cylinder for gas fire extinguishing system
- T/STTX 2.5-2019 Barcode Printing Quality Assurance System Part 5: Barcode Quality Inspection
- T/CCGA 60001-2022 Periodic inspection and evaluation of seamless steel gas cylinder for gases fire extinguishing system
- T/CCGA 60002-2022 Periodic inspection and evaluation of steel welded cylinder for gases fire extinguishing system
VE-FONDONORMA, Three-level inspection system
YU-JUS, Three-level inspection system
- JUS A.K1.014-1987 Quality systems. Model for quality assurance in final inspection and test
Standard Association of Australia （SAA）, Three-level inspection system
- AS/NZS ISO 9003:1994 Quality systems - Model for quality assurance in final inspection and test
- HB 70.2-1994 HIA Quality Management System - Project Procedure and Inspection Manual
Military Standard of the People's Republic of China-General Armament Department, Three-level inspection system
- GJB/Z 9003-1996 Quality System – Quality Assurance Model for Final Inspection and Testing
Professional Standard - Farm Machinery, Three-level inspection system
- NJ 97-1976 Metallographic inspection standard for heat treatment of three pairs of precision coupling parts of diesel engine fuel injection system
Hubei Provincial Standard of the People's Republic of China, Three-level inspection system
- DB42/T 224-2002 Operation rules for field planting inspection of "three-line" parents and hybrids of hybrid rice
- DB42/T 093-2002 High-quality hybrid rapeseed Huaza No. 2 "three-line" parent and hybrid field planting inspection operation
British Standards Institution (BSI), Three-level inspection system
- 22/30457036 DC BS EN 9102 Aerospace series. Quality systems. First Article Inspection Requirement
- BS EN ISO 24444:2020 Tracked Changes. Cosmetics. Sun protection test methods. In vivo determination of the sun protection factor (SPF)
- BS EN ISO 24444:2010 Cosmetics. Sun protection test methods. In vivo determination of the sun protection factor (SPF)
- BS ISO 10328-6:1997 Prosthetics.Structural testing of lower-limb prostheses - Loading parameters of supplementary structural tests
- BS ISO 10328-4:1997 Prosthetics.Structural testing of lower-limb prostheses - Loading parameters of principal structural tests
- BS ISO 16431:2012 Hydraulic fluid power. System Cleanup-procedures and verification of cleanliness of assembled systems
- BS EN 1317-2:1998 Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers
- BS CWA 14928:2004 Review on SIF infrastructure, architecture, message processing and transport layer
- BS ISO 4965-1:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Testing systems
- BS DD ISO/TS 13075:2009 Gaseous-media fire-extinguishing systems - Engineered extinguishing systems - Flow calculation implementation method and flow verification and testing for approval
National Metrological Verification Regulations of the People's Republic of China, Three-level inspection system
- JJG(电子) 04020-1989 Specification for verification of sample transistor specially intended to measure the noise factor of high frequency medium and low power triode transistor
SE-SIS, Three-level inspection system
- SIS SS 2454-1979 iSO system for inspection of plain workpieces — Tolerances for gauges for shafts y6 to y8
- SIS SS 2438-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts f6 to f9
- SIS SS 2432-1979 ISO system for inspection of plain workpieces - Tolerances for gauges for shafts b9 to b13
- SIS SS 2421-1979 ISO system for inspection of plain workpieces — Tolerances forgauges for holes U6 to U8
- SIS SS 2458-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts zc7 to zc9
- SIS SS 2419-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes S6 to S8
- SIS SS 2414-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes K6 to K8
- SIS SS 2420-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes T6 to T8
- SIS SS 2415-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes M6 to M8
- SIS SS 2446-1979 fSO system for inspection of plain workpieces — Tolerances for gauges for shafts n6 and n7
- SIS SS 2409-1979 ISO system for inspection of plain workplaces — Tolerances for gauges for holes FG6 to FG8
- SIS SS 2449-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts s6 and s7
- SIS SS 2444-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts k6 to k16
- SIS SS 2428-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes ZC8 to ZC10
- SIS SS 2405-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes D7 to D13
- SIS SS 2448-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts r6 and r7
- SIS SS 2447-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts p6 and p7
- SIS SS 2455-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts z6 to z8
- SIS SS 2408-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes F6 to F9
- SIS SS 2440-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts g6 to g8
- SIS SS 2410-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes G6 to G8
- SIS SS 2418-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes R6 to R8
- SIS SS 2406-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes E6 to E10
- SIS SS 2411-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes H6 to H16
- SIS SS 2433-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts c8 to c12
- SIS SS 2401-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes A11 to A13
- SIS SS 2426-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes ZA7 to ZA9
- SIS SS 2407-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes EF6 to EF9
- SIS SS 2445-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts m6 and m7
- SIS SS 2412-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes J6 to J8
- SIS SS 2441-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts h6 to h16
- SIS SS 2451-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts u6 to u8
- SIS SS 2457-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts zb7 to zb9
- SIS SS 2413-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes JS6 to JS16
- SIS SS 2456-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts za6 to za8
- SIS SS 2422-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes V6 to V8
- SIS SS 2431-1979 fSO system for inspection of plain workpieces — Tolerances for gauges for shafts a 10 to a13
- SIS SS 2425-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes Z7 to Z9
- SIS SS 2452-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts v6 to v8
- SIS SS 2450-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts t6 and t7
- SIS SS 2443-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts js6 to js16
- SIS SS 2402-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes B9 to B13
- SIS SS 2437-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts ef6 to ef9
- SIS SS 2435-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts d7 to d11
- SIS SS 2417-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes P6 to P9
- SIS SS 2439-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts fg6 and fg7
- SIS SS 2404-1979 ISO system for inspection of plain workplaces — Tolerances for gauges for holes CD7 to CD10
- SIS SS 2427-1979 ISO system for inspection of plain workplaces — Tolerances for gauges for holes ZB8 to ZB10
- SIS SS 2442-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts j6 and j7
- SIS SS 2403-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes C8 to C13
- SIS SS 2424-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes Y6 to Y8
- SIS SS 2416-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes N6 to N11
- SIS SS 2434-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts cd7 to cd10
- SIS SS 2436-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts e6 to e10
- SIS SS 2423-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes X6 to X8
Professional Standard - Certification and Accreditation, Three-level inspection system
- RB/T 187-2016 General Requirements for Integrity Management System of Food Inspection Institutions
Institute of Electrical and Electronics Engineers (IEEE), Three-level inspection system
- IEEE/ANSI N42.15-1997 American National Standard Check Sources for and Verification of Liquid-Scintillation Counting Systems
Korean Agency for Technology and Standards (KATS), Three-level inspection system
Association Francaise de Normalisation, Three-level inspection system
- NF X50-133:1994 Quality systems. Model for quality assurance in final inspection and test.
- NF C32-074-22:2000 Common test methods for cables under fire conditions - Test on gas evolved during combustion of materials from cables - Part 2-2 : procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity.
American National Standards Institute （ANSI), Three-level inspection system
- ANSI/ASTM D6792:2013 PRACTICE FOR QUALITY SYSTEM IN PETROLEUM PRODUCTS AND LUBRICANTS TESTING LABORATORIES
Tianjin Provincial Standard of the People's Republic of China, Three-level inspection system
- DB12/ 097.5-1998 Regulations for quality inspection and evaluation of automatic fire extinguishing systems Part 5: Regulations for quality inspection and evaluation of gas fire extinguishing systems
BE-NBN, Three-level inspection system
IT-UNI, Three-level inspection system
US-CFR-file, Three-level inspection system
- CFR 9-381.76-2014 Animals and animal products. Part381:Poultry products inspection regulations. SubpartK:Post mortem inspection; disposition of carcasses and parts. Section381.76:Post-mortem inspection under Traditional Inspection,the Streamlined Inspection System (SIS),th
国家市场监督管理总局、中国国家标准化管理委员会, Three-level inspection system
- GB/T 39367.1-2020 In vitro diagnostic test systems—Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens—Part 1: General requirements, terms and definitions
- GB/T 19634-2021 In vitro diagnostic test systems—General technical requirements for blood-glucose monitoring systems for self-testing
KR-KS, Three-level inspection system
- KS P ISO 17822-2021 In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide
- KS B ISO 1938-2014 ISO system of limits fits — Part 2: Inspection of plain workpieces
- KS P ISO 16256-2017 Clinical laboratory testing and in vitro diagnostic test systems ─ Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
American Society for Testing and Materials (ASTM), Three-level inspection system
- ASTM E1212-99 Standard Practice for Quality Control Systems for Nondestructive Testing Agencies
- ASTM E1212-04(2008) Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
- ASTM D6792-05 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-04 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-04a Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-06 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-03 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM E1212-04 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
- ASTM D5771-20 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
- ASTM D5771-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
- ASTM D5771-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
Indonesia Standards, Three-level inspection system
- SNI ISO 7278-2:2011 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
国家药监局, Three-level inspection system
- YY/T 1789.3-2022 In vitro diagnostic testing system performance evaluation methods Part 3: Detection limit and quantitation limit
- YY/T 1789.1-2021 Methods for performance evaluation of in vitro diagnostic test systems Part 1: Precision
- YY/T 1789.2-2021 Methods for performance evaluation of in vitro diagnostic test systems Part 2: Accuracy
European Committee for Standardization (CEN), Three-level inspection system
- EN 3030:1994 Aerospace series; test method for dry film lubricants; solids content
International Organization for Standardization (ISO), Three-level inspection system
- ISO/R 1938-1:1971 ISO system of limits and fits - Part 1: Inspection of plain workpieces
- ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
PL-PKN, Three-level inspection system
- PN EN 29003-1993 Quality systems; model for quality assurance in final inspection and test
Professional Standard - Chemical Industry, Three-level inspection system
- HG/T 3174-2002 Fabrication and inspection method for High pressure urea equipment selective corrosion and metallographic examination on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel
Natural Gas Processor's Association (NGPA), Three-level inspection system
- GPA RR-97-1986 Excess Enthalpy Experimental Data Binary Systems: Water + Ethylene Water + Ethane Water + Propane Water + n-Butane Ternary System: Water + Methane + Carbon Dioxide
Inner Mongolia Provincial Standard of the People's Republic of China, Three-level inspection system
- DB15/T 353.7-2020 Inspection regulations for building fire protection installations part 7: gas fire extinguishing system
Anhui Provincial Standard of the People's Republic of China, Three-level inspection system
- DB34/T 4432-2023 Specifications for the quality control system of rapid testing laboratories for edible agricultural products
IX-FAO, Three-level inspection system
- CAC/GL 34-1999(En) Guidelines for the Development of Equivalency Agreements for Food Import and Export Inspection and Certification Systems
- CAC/GL 34-1999(Ch) Guidelines for the Development of Equivalency Agreements for Food Import and Export Inspection and Certification Systems
- CAC/GL 53-2003(Ch) Guidelines for determining the equivalence of hygienic measures in food inspection and certification systems
- CAC/GL 53-2003(En) Guidelines for determining the equivalence of hygienic measures in food inspection and certification systems
BELST, Three-level inspection system
- STB GOST R 8.611-2006 State system for ensuring the uniformity of measurements. Standard thermoelectric platinum rhodium/platinum converters of the first, second and third grades. Verification procedure
Professional Standard - Agriculture, Three-level inspection system
- 农业部公告第2094号 In 2014, the list of qualified agricultural product quality and safety testing institutions and the review and approval list of the Ministry of Agriculture's ministerial-level product quality supervision, inspection and testing center (the third batch)
International Electrotechnical Commission (IEC), Three-level inspection system
- ISO/IEC 14543-5-12:2019 Information technology - Home electronic system (HES) architecture - Part 5-12: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - Remote access test and verification
Professional Standard - Post and Telecommunication, Three-level inspection system
- YD/T 2754-2014 Verification of functions and protocol stack for synchronous digital Hierarchy(SDH)network element management
HU-MSZT, Three-level inspection system