ZH

RU

ES

Exhaust gas detection Exhaust gas detection

Exhaust gas detection Exhaust gas detection, Total:500 items.

In the international standard classification, Exhaust gas detection Exhaust gas detection involves: Air quality, Analytical chemistry, Radiation protection, Radiation measurements, Burners. Boilers, Motor cycles and mopeds, Vocabularies, Road vehicles in general, Quality, Wastes, Fuels, Diagnostic, maintenance and test equipment, Internal combustion engines for road vehicles, Environmental protection, Internal combustion engines, Water quality, Food products in general, Soil quality. Pedology, Gas and steam turbines. Steam engines, Non-destructive testing, Postal services, Lifting equipment, Pipeline components and pipelines, Products of the chemical industry, Road vehicle systems, Microbiology, Wood technology processes, Geology. Meteorology. Hydrology, Inorganic chemicals, Industrial automation systems, Mining and quarrying, Alarm and warning systems, Nuclear energy engineering, Medical equipment, Occupational safety. Industrial hygiene, Terminology (principles and coordination), Metrology and measurement in general, Fluid storage devices, Aerospace electric equipment and systems, Elements of buildings, Explosion protection, Domestic, commercial and industrial heating appliances, Protection against fire, Semiconductor devices.


Taiwan Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • CNS 12688-1990 Methods for Determination of Benzene in Exhaust Gas
  • CNS 12686-1990 Methods for Determination of Phenols in Exhaust Gas
  • CNS 12687-1990 Methods for Determination of Pyridine in Exhaust Gas
  • CNS 12825-1990 Methods of Test for Carbon Disulfide in Exhaust Gas
  • CNS 12824-1990 Methods of Test for Carbon Monoxide in Exhaust Gas
  • CNS 3797-1975 Method for Measuring Water Content in Stack Gas
  • CNS 4049-1976 Composition Analysis for Waste Gases of Combustion Equipments
  • CNS 3798-1975 Location for Measurement of Dust Content in Stack Gas.
  • CNS 8842-1993 Method of Test for Potassium in Industrial Waste Water(Flame Emission Spectrophotometric Method)
  • CNS 8843-1993 Method of Test for Sodium in Industrial Waste Water(Flame Emission Spectrophotometric Method)
  • CNS 4050-1976 Method of Measuring Velocity and Flow Rate of Stack Gas

SE-SIS, Exhaust gas detection Exhaust gas detection

  • SIS SS IEC 761:1988 Nuclear instrumentation — Equipment for continuously monitoring radioactivity in gaseous effluents
  • SIS SS-IEC 761:1992 Nuclear instrumentation — Equipment for continuously monitoring radioactivity in gaseous effluents

Group Standards of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • T/QGCML 1831-2023
  • T/NAIA 0136-2022 Coal Chemical Industry Wastewater Testing Guide
  • T/HAS 113-2022 Agricultural product inspection and testing laboratory waste management specification
  • T/CIC 401-2021 High temperature non-dispersive infrared absorption method for detection of inorganic harmful gas factors in waste gas from fixed pollution sources in metallurgical industry
  • T/SSESB 1-2020 Stationary source emission—Determination of humidity —Resistance and Capacitance Method
  • T/SDCA 006-2021 Management specifiaction of waste liquid for quality and safety inspection of agricultural products
  • T/HNAEPI 002-2021 Technical requirement and test method of on-line thallium monitor for pollutant discharge wastewater
  • T/SBX 025-2019 Fixed Gas Detector
  • T/CATSI 02010-2022 Method for Helium leak?detection of gas cylinders
  • T/DZJN 168-2023 Calculation and detection method of recovery rate of valuable metals in waste power batteries
  • T/LNEMA 005-2022 Determination of Monochloroethane in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Methanol - Gas Chromatography

American National Standards Institute (ANSI), Exhaust gas detection Exhaust gas detection

  • ANSI N42.18-2004 Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
  • ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
  • ANSI/UL 1484-2008 Residential Gas Detectors
  • ANSI/ISEA 102-1990 Gas Detector Tube Units - Short Term Type for Toxic Gases and Vapors in Working Environments
  • ANSI/NFPA 1911-2011 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus

Hebei Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves
  • DB13/T 5147-2019 Technical Requirements for Detection of Ozone Release from Organic Waste Gas Purification Devices
  • DB13/T 5185-2020 Agricultural product quality inspection and testing laboratory waste management specification
  • DB13/T 5468-2021 Gravimetric Method for Determining Humidity of Exhaust Gas from Stationary Pollution Sources
  • DB13/T 2518-2017 Specifications for inspection and testing of combustible gas and toxic gas detection and alarm systems in industrial enterprises
  • DB13/T 2376-2016 Determination of particulate matter in exhaust gas from stationary pollution sources β-ray method

German Institute for Standardization, Exhaust gas detection Exhaust gas detection

  • DIN 51402-1:1986 Testing of flue gases of oil burning systems; visual and photometric determination of the smoke number
  • DIN 51402-2:1979 Determination of flue gases of oil burning systems; method by fluid means for detection of oil derivatives
  • DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
  • DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
  • DIN EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection; English version of DIN EN 15308:2008-05
  • DIN 38408-3:1993 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of ozone (G 3)
  • DIN 38407-2:1993 German standard methods for the determination of water, waste water and sludge; jointly determinable substances (group F); determination of low volatile halogenated hydrocarbons by gas chromatography (F 2)
  • DIN EN ISO 20485:2018-05 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017); German version EN ISO 20485:2018
  • DIN 38408-5:1990 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
  • DIN 38408-5:1990-06 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
  • DIN EN 1593:1999-11 Non-destructive testing - Leak testing - Bubble emission techniques; German version EN 1593:1999
  • DIN 54191:2017-10 Non-destructive testing - Thermographic testing of electric installations
  • DIN 38408-23:1987 German standard methods for the examination of water, waste water and sludge; gaseous constituents (group G); determination of oxygen saturation index (G 23)
  • DIN 38412-37:1999-04 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L...
  • DIN EN 15308:2016 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection; German version EN 15308:2016
  • DIN 38408-3:2011-04 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
  • DIN 51853:2011 Testing of fuel gases - Sampling
  • DIN EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
  • DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
  • DIN EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS); English version of DIN EN 15527:2008-09
  • DIN 38408-3:2011 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
  • DIN EN ISO 20475:2021-03 Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018); German version EN ISO 20475:2020
  • DIN 51614:1989-12 Testing of liquefied petroleum gases; detection of ammonia, water and alkaline solution
  • DIN EN ISO 14246:2022-05 Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022); German version EN ISO 14246:2022
  • DIN 51610:1983-06 Testing of liquefied petroleum gases; sampling
  • DIN 38407-37:2013-11 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 37: Determination of organochlorine pesticides, polychlorinated biphenyls and chlorobenzene in water - Method using gas chro...
  • DIN 38407-44:2018-02 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 44: Determination of selected heterocyclic aromatic hydrocarbons (NSO heterocycles) in water - Method using gas chromatograp...
  • DIN 38407-39:2011-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 39: Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method using gas chromatography with mass spectrometr...
  • DIN 38407-42:2011-03 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 42: Determination of selected polyfluorinated compounds (PFC) in water - Method using high performance liquid chromatography...
  • DIN 38407-35:2010-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 35: Determination of selected phenoxyalkyl carbonic acids and further acid plant treatment agents - Method using high perfor...
  • DIN 38407-36:2014-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 36: Determination of selected active substances of plant protection products and other organic substances in water - Method ...
  • DIN 38407-22:2001-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-...
  • DIN EN ISO 10961:2020-03 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019); German version EN ISO 10961:2019

HU-MSZT, Exhaust gas detection Exhaust gas detection

British Standards Institution (BSI), Exhaust gas detection Exhaust gas detection

  • BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • BS ISO 11042-1:1996 Gas turbines. Exhaust gas emission. Measurement and evaluation
  • BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
  • BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
  • BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
  • 19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS EN 15308:2016 Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
  • BS ISO 20048-2:2023 Solid biofuels. Determination of off-gassing and oxygen depletion characteristics - Operational method for screening of carbon monoxide off-gassing
  • BS ISO 11042-1:1997 Gas turbines - Exhaust gas emission - Measurement and evaluation
  • 21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS PAS 111:2012 Specification for the requirements and test methods for processing waste wood
  • BS EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
  • BS 5343-2:1991 Gas detector tubes - Specification for long term gas detector tubes
  • BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
  • BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
  • PD ISO/TS 24522:2019 Event detection process: Guidelines for water and wastewater utilities
  • BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
  • BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
  • BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
  • BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
  • BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
  • BS ISO 16247:2004 Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
  • BS EN ISO 20475:2020 Gas cylinders. Cylinder bundles. Periodic inspection and testing
  • BS ISO 8178-5:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
  • BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
  • BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
  • BS ISO 11599:1998 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
  • BS ISO 8178-3:2019 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
  • BS EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
  • BS EN 50402:2017 Tracked Changes. Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
  • BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
  • BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
  • BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
  • BS EN ISO 10961:2019 Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection

International Organization for Standardization (ISO), Exhaust gas detection Exhaust gas detection

  • ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
  • ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
  • ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
  • ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • ISO/TS 24522:2019 Event detection process: Guidelines for water and wastewater utilities
  • ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
  • ISO 11042-1:1996 Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
  • ISO 20485:2017 Non-destructive testing - Leak testing - Tracer gas method
  • ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
  • ISO 11599:1997 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
  • ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
  • ISO 20475:2018 Gas cylinders — Cylinder bundles — Periodic inspection and testing
  • ISO/TR 4011:1976 Road vehicles; Apparatus for measurement of the opacity of exhaust gas from diesel engines
  • ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
  • ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
  • ISO 10961:2019 Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspection
  • ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
  • ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin

Danish Standards Foundation, Exhaust gas detection Exhaust gas detection

  • DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • DS/EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
  • DS/EN 13185/A1:2004 Non-destructive testing - Leak testing - Tracer gas method
  • DS/EN 16167:2012 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
  • DS/EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
  • DS/EN 1593:2002 Non-destructive testing - Leak testing - Bubble emission techniques
  • DS/EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
  • DS/EN 50402/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • DS/EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • DS/CEN/TS 16183:2012 Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS)

Korean Agency for Technology and Standards (KATS), Exhaust gas detection Exhaust gas detection

  • KS M 2300-2005 Methods for determination of oxygen in flue gas
  • KS M 2304-2006 Method for determination of phosgene in exhaust gas
  • KS M 2304-2014 Method for determination of phosgene in exhaust gas
  • KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
  • KS R ISO 3929-2006(2021) Road vehicles-Measurement methods for exhaust gas emissions during inspection or maintenance
  • KS R ISO 3929-2006(2016) Road vehicles-Measurement methods for exhaust gas emissions during inspection or maintenance
  • KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • KS M 2302-2006 Methods for determination of arsenic in flue gas
  • KS M 2402-2007 Petroleum products-Gasoline-Determination of lead content
  • KS M 2402-1982 Petroleum products-Gasoline-Determination of lead content
  • KS R ISO 3929:2006 Road vehicles-Measurement methods for exhaust gas emissions during inspection or maintenance
  • KS M 0029-1993 Methods for Determination of Mercaptan in Exhaust Gas
  • KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • KS M 2104-2005(2010) Methods for determination of hydrogen cyanide in exhaust gas
  • KS M 2303-2006 Methods for determination of carbon disulfide in exhaust gas
  • KS M 0030-1993 Methods for determination of phenols in exhaust gas
  • KS M 2303-2014 Methods for determination of carbon disulfide in exhaust gas
  • KS M 0030-1987 Methods for determination of phenols in exhaust gas
  • KS B ISO 11042-1:2015 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
  • KS B ISO 11042-1:2005 Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation
  • KS B ISO 11042-1-2015(2020) Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
  • KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines-Exhaust emission measurement-Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
  • KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
  • KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
  • KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
  • KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
  • KS I 2218-2009 Detector tube type gas measuring instruments
  • KS A ISO 11599:2012 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
  • KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178
  • KS F 2292-2008 Test method of air tightness for windows and doors
  • KS F 2292-2013 The method of air tightness for windows and doors
  • KS B ISO 6406-2005(2010) Periodic inspection and testing of seamless steel gas cylinders
  • KS B ISO 11623:2008 Transportable gas cylinders-Periodic inspection and testing of composite gas cylinders
  • KS B ISO 11623:2013 Transportable gas cylinders-Periodic inspection and testing of composite gas cylinders
  • KS C 6566-2002(2022) Gas sensors for detecting flammable gas
  • KS C 6566-2002(2017) Gas sensors for detecting flammable gas
  • KS B ISO 8178-11:2008 Reciprocating internal combustion engines-Exhaust emission measurement-Part 11:Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions

Shanxi Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

KR-KS, Exhaust gas detection Exhaust gas detection

  • KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

AT-ON, Exhaust gas detection Exhaust gas detection

  • ONORM S 2116-5-2001 Examinations of solidified wastes - Determination of availability
  • ONORM E 1378-1971 Test probe for food wasle disposal unils.
  • ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity
  • ONORM S 2116-4-2001 Examinations of solidified wastes - Eluation tests during 24 hours, 64 days, 2 days

PL-PKN, Exhaust gas detection Exhaust gas detection

  • PN C04557-1972 Water and waste water Determination of odór and flavour
  • PN C04642-01-1991 Water and waste water Tests of pollutants in atmospheric precipitation General
  • PN C04642-02-1991 Water and waste water Tests of pollutants in atmospheric precipitation Sampling
  • PN Z04173-02-1989 Airpurity protection ests tor dowtherms etermination ot dowtherm A in tht aste gas discharging to atmospheric ir (emission) by gas hromatography

U.S. Air Force, Exhaust gas detection Exhaust gas detection

Japanese Industrial Standards Committee (JISC), Exhaust gas detection Exhaust gas detection

  • JIS K 0106:1995 Methods for determination of chlorine in flue gas
  • JIS K 0106:2010 Methods for determination of chlorine in flue gas
  • JIS K 0081:2012 Method for determination of boron in flue gas
  • JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
  • JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • JIS K 0221:1988 Methods for determination of arsenic in flue gas
  • JIS K 0106 ERRATUM 1:2000 Methods for determination of chlorine in flue gas (Erratum 1)
  • JIS K 0099 ERRATUM 1:2000 Methods for determination of ammonia in flue gas (Erratum 1)
  • JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
  • JIS B 8043-1:2000 Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation
  • JIS K 0104:2000 Methods for determination of nitrogen oxides in flue gas
  • JIS K 0350-20-10:2001 Testing methods for detection and enumeration of coliform organisms in industrial water and waste water
  • JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
  • JIS K 0098:1988 Methods for determination of carbon monoxide in flue gas
  • JIS K 0302:1989 Measuring method for particle-size distribution of dusts in flue gas
  • JIS K 0103:1995 Methods for determination of sulfur oxides in flue gas
  • JIS K 0103:2005 Methods for determination of sulfur oxides in flue gas
  • JIS K 0103:1999 Methods for determination of sulfur oxides in flue gas
  • JIS K 0107:2002 Methods for determination of hydrogen chloride in flue gas
  • JIS K 0107:2012 Methods for determination of hydrogen chloride in flue gas
  • JIS K 0104:2011 Methods for determination of nitrogen oxides in flue gas
  • JIS K 0804:2022 Gas detector tube measurement system
  • JIS K 0102-3:2022 Testing methods for industrial water and industrial wastewater -- Part 3: Metals
  • JIS K 0103:2011 Methods for determination of sulfur oxides in flue gas
  • JIS B 7993:2008 Automated measuring systems for flue gas using non-exractive methods
  • JIS K 0125:1995 Testing methods for volatile organic compounds in industrial water and waste water
  • JIS K 0125:2016 Testing methods for volatile organic compounds in industrial water and waste water
  • JIS B 8008-7:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
  • JIS B 8008-8:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination

VN-TCVN, Exhaust gas detection Exhaust gas detection

  • TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
  • TCVN 4558-1988 Waste water.Metrods for the determination of colour and smell
  • TCVN 6503-1-1999 Gas turbines.Exhaust gas emission.Part 1: Measurement and evaluation
  • TCVN 7241-2003 Health care solid waste incinerators.Determination method of dusts concentration in fluegas
  • TCVN 7244-2003 Health care solid waste incinerators.Determination method of hydrochloric acid concentration (HCI) in fluegas
  • TCVN 7243-2003 Health care solid waste incinerators.Determination method of hydrofloride acid concentration (HF) in fluegas
  • TCVN 7242-2003 Health care solid waste incinerators.Determination method of carbon monoxide concentration (CO) in fluegas
  • TCVN 7246-2003 Health care solid waste incinerator.Determination method of sulfur dioxides (SO2) concentration in fluegas
  • TCVN 7245-2003 Health care solid waste incinerator.Determination method of nitrogen oxides (NOx) concentration in fluegas

Association Francaise de Normalisation, Exhaust gas detection Exhaust gas detection

  • NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
  • NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
  • NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
  • NF T90-201:1979 Essais des eaux - Effluents aqueux des raffineries de pétrole - Échantillonnage
  • NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
  • NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
  • NF R10-025-3:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 3 : procédure de contrôle des polluants visibles (opacité) des gaz d'échappement
  • NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
  • NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
  • NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
  • NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
  • NF E52-402:2010 Cranes - Wire ropes - Care and maintenance, inspection and discard.
  • NF E37-504-1:1999 Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.
  • NF E37-504-1*NF ISO 11042-1:2016 Gaz turbines - Exhaust gas emission - Part 1 : measurement and evaluation
  • NF H96-116:1998 Conteneurs roulants à déchets - Code d'essai pour le mesurage du bruit aérien émis par les conteneurs roulants à déchets.
  • NF X43-103:1996 Air quality. Olfactometric measurements. Measurement of the odour of a gazeous effluent. Supra-threshold methods.
  • NF X30-453:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste, by using capillary gas chromatography with electron capture or mass spectrometric detection.
  • NF X43-002:1983 Air pollution. Flue gases. Determination of the smoke spot number (bacharach method).
  • NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
  • NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
  • NF ISO 8178-9:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 9 : cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combust...
  • NF A09-492*NF EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method
  • NF EN ISO 20485:2018 Essais non destructifs - Contrôle d'étanchéité - Méthode par gaz traceur
  • NF E37-211-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels.
  • NF ISO 16247:2006 Véhicules routiers - Détection des fuites du dispositif d'échappement - Méthode d'essai à l'hélium et spécification du dispositif de détection
  • NF EN ISO 20486:2018 Essais non destructifs - Contrôle d'étanchéité - Étalonnage des fuites de référence des gaz
  • NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
  • NF C23-596*NF EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
  • NF EN 50402:2017 Matériel électrique pour la détection et la mesure des gaz ou vapeurs combustibles ou toxiques ou de l'oxygène - Exigences relatives à la sécurité fonctionnelle des systèmes de détection de gaz
  • NF E29-694*NF EN ISO 14246:2022 Gas cylinders - Cylinder valves - Manufacturing tests and examinations
  • NF EN ISO 20475:2020 Bouteilles à gaz - Cadres de bouteilles - Contrôles et essais périodiques
  • NF ISO 8178-5:2021 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 5 : carburants d'essai
  • NF EN 1593/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
  • NF EN 1593:1999 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
  • NF A09-491:1989 Non destructive testing. Tightness testing. Testing by accumulation or sniffing of gas.
  • NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
  • NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
  • NF EN ISO 14246:2022 Bouteilles à gaz - Robinets de bouteilles à gaz - Essais de fabrication et contrôles
  • NF R10-025-3:1996 Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 3 : monitoring procedure of visible pollutants (opacity of exhaust gas).
  • NF E29-793/A1*NF EN ISO 16148/A1:2020 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1
  • NF EN ISO 10961:2019 Bouteilles à gaz - Cadres de bouteilles - Conception, fabrication, essais et inspection
  • XP X31-074*XP CEN/TS 16183:2012 Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS)
  • XP CEN/TS 16183:2012 Boues, biodéchets traités et sols - Détermination de certains phtalates par chromatographie en phase gazeuse capillaire avec détection par spectrométrie de masse (CG-SM)

Heilongjiang Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB23/T 3468-2023 Disposal Specifications for Hemp Inspection and Testing Laboratory Waste
  • DB23/T 2482-2019 Laser Scattering Method for Determination of Exhaust Gas Particles from Stationary Pollution Sources

RU-GOST R, Exhaust gas detection Exhaust gas detection

  • GOST R 52408-2005 Reciprocating internal combustion engines. Exhaust emission. Part 2. Measurement of exhaust emission at site
  • GOST R 52408-2014 Reciprocating internal combustion engines. Exhaust emission and visible pollutants. Measurement of exhaust emission at site
  • GOST R ISO 11042-1-2001 Gas turbines. Methods of exhaust gas emission determinations
  • GOST R ISO 16000-10-2009 Indoor air. Part 10. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
  • GOST 17.2.2.01-1984 Nature protection. Atmosphere. Automobile diesels. Exhaust smoke opacity. Rates and methods of measurement

TH-TISI, Exhaust gas detection Exhaust gas detection

  • TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

Shaanxi Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB61/T 1466-2021 Hazardous waste disposal management specification for inspection and testing institutions

Shanghai Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB31/T 707-2013 Test method of heavy metals and brominated flame retardants in wastewater from recycling, recovery and treatment industry of waste electrical and electronic equipment
  • DB31/T 310014-2023 Determination of chlorine in waste gas from fixed pollution sources by ion chromatography
  • DB31/T 287-2002 Gas detection tube method for rapid detection of cooking fumes in catering industry

ES-UNE, Exhaust gas detection Exhaust gas detection

  • UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
  • UNE-EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
  • UNE-EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems (Endorsed by Asociación Española de Normalización in June of 2017.)
  • UNE-EN ISO 20475:2021 Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)
  • UNE-CEN/TS 17847:2022 Characterization of waste - Determination of selected low boiling point alcohols using gas chromatography with flame ionization detection after static head-space extraction (HS-GC-FID) (Endorsed by Asociación Española de Normalización in November of...
  • UNE-EN ISO 14246:2022 Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022)
  • UNE-CEN/TR 17345:2019 Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Endorsed by Asociación Española de Normalización in March of 2019.)
  • UNE-EN ISO 10961:2020 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019)

未注明发布机构, Exhaust gas detection Exhaust gas detection

  • DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • SAE AIR5892B-2004 Nonvolatile Exhaust Particle Measurement Techniques
  • BS ISO 11042-1:1996(2000) Gas turbines — Exhaust gas emission — Part 1 : Measurement and evaluation
  • BS EN 16167:2018(2019) Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC - MS) and gas chromatography with electron - capture detection (GCECD)
  • BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
  • BS EN 1593:1999(2008) Non - destructive testing — Leak testing — Bubble emission techniques
  • BS EN 15527:2008(2009) Characterization of waste — Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC / MS)
  • DIN EN 13185 Berichtigung:2004 Non-destructive testing – leak testing – test gas method; German version EN 13185:2001
  • BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

Professional Standard - Environmental Protection, Exhaust gas detection Exhaust gas detection

  • HJ 1012-2018 Ambient air and stationary source emission--Specifications and test procedures for total hydrocarbons, methane and nonmethane hydrocarbons portable monitoring instrument
  • HJ 1013-2018 Technical requirements and detection methods for continuous monitoring system of non-methane total hydrocarbons in waste gas from stationary pollution sources
  • HJ/T 397-2007 Technical specifications for emission monitoring of stationary source
  • HJ 1219-2021 Determination of pyridine in ambient air and exhaust gas by gas chromatography
  • HJ 547-2009 Stationary source emission.Determination of chlorine.Iodometric method
  • HJ 547-2017 Iodometric method for the determination of chlorine gas in waste gas from stationary pollution sources
  • HJ 1011-2018 Technical requirements and detection methods of portable Fourier transform infrared monitor for volatile organic compounds in ambient air and exhaust gas
  • HJ 1262-2022 Ambient air and waste gas—Determination of odor— Triangle odor bag method
  • HJ 549-2009 Ambient air and waste gas.Determination of hydrogen chloride.Ion chromatography
  • HJ 549-2016 Ambient air and stationary source emissions -Determination of Hydrogen Chloride-Ion Chromatography
  • HJ 869-2017 Stationary source emission-Determination of phthalate esters - Gas chromatography
  • HJ 533-2009 Ambient air exhaust gas.Determination of ammonia.Nessler's reagent spetcrophotometry
  • HJ 1042-2019 Ambient air and waster gas-Determination of trimethylamine-Solvent absorption-Headspace/gas chromatography
  • HJ 545-2009 Stationary source emission.Determination of total gaseous phosphorus.Quimociac volumetric analysis
  • HJ 1079-2019 Determination of Chlorobenzene Compounds in Waste Gases from Stationary Pollution Sources by Gas Chromatography
  • HJ 545-2017 Determination of Gaseous Total Phosphorus in Exhaust Gases from Stationary Pollutants
  • HJ 801-2016 Ambient air and waste gas-Determination of amide compounds-Liquid chromatography
  • HJ 1006-2018 Determination of volatile halogenated hydrocarbons in waste gas from stationary pollution sources Air bag sampling-gas chromatography
  • HJ 711-2014 Solid waste.Determination of phenolic compounds.Gas chromatography
  • HJ/T 70-2001 High-chlorine wastewater.Determination of chemical oxygen demand.Chlorine emendation method
  • HJ 975-2018 Solid waste-Determination of benzene and its analogies-Headspace-gas chromatography
  • HJ 768-2015 Determination of Organophosphorus Pesticides in Solid Waste by Gas Chromatography
  • HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry
  • HJ 1261-2022 Determination of benzene series in waste gas from stationary pollution sources Air bag sampling/direct injection-gas chromatography
  • HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
  • HJ 544-2009 Stationary source emission.Determination of sulfuric acid mist.Ion chromatography
  • HJ 688-2019 Determination of Hydrogen Fluoride in Stationary Pollution Source Exhaust Gas by Ion Chromatography
  • HJ 891-2017 Determination of Polychlorinated Biphenyls in Solid Waste by Gas Chromatography-Mass Spectrometry
  • HJ 544-2016 Stationary source emission-Determination of sulfuric acid mist-Ion chromatography
  • HJ 1040-2019 Ion Chromatography for the Determination of Hydrogen Bromide in Waste Gases from Stationary Pollution Sources
  • HJ 950-2018 Determination of Polycyclic Aromatic Hydrocarbons in Solid Waste by Gas Chromatography-Mass Spectrometry
  • HJ 647-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons.High performance liquid chromatography

Lithuanian Standards Office , Exhaust gas detection Exhaust gas detection

  • LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
  • LST EN 15308-2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
  • LST EN 13185-2002 Non-destructive testing - Leak testing - Tracer gas method
  • LST EN 13185-2002/A1-2004 Non-destructive testing - Leak testing - Tracer gas method
  • LST EN 16167-2012 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
  • LST EN 1593-2001 Non-destructive testing - Leak testing - Bubble emission techniques
  • LST EN 1593-2001/A1-2004 Non-destructive testing - Leak testing - Bubble emission techniques
  • LST EN 15527-2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
  • LST EN 50402-2005/A1-2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems

Indonesia Standards, Exhaust gas detection Exhaust gas detection

Henan Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB4117/T 333-2022 Management specification for inspection and testing waste of pressure-bearing special equipment
  • DB41/T 1522-2018 Technical specification for inspection and detection of flammable and toxic gas alarms
  • DB41/T 2199-2021 Technical specifications for continuous monitoring of ammonia emissions from stationary pollution sources

CZ-CSN, Exhaust gas detection Exhaust gas detection

RO-ASRO, Exhaust gas detection Exhaust gas detection

  • STAS 6560-1982 SURFACE AND WASTE WATER Determination of biochemical oxygencdemand
  • STAS 6954-1982 SURFACE AND WASTE WATERS Detennination of chcmical oxygen demand
  • STAS 11040-1988 APPARATUS FOR MEASUREMENT OF OPACITY OF EXHAUST GASES FROM DIESEL ENGINES

Society of Automotive Engineers (SAE), Exhaust gas detection Exhaust gas detection

  • SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
  • SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement
  • SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
  • SAE J900-1995 Crankcase Emission Control Test Code
  • SAE AS6462-2012 AS5553, Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition Verification Criteria
  • SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT

SAE - SAE International, Exhaust gas detection Exhaust gas detection

  • SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
  • SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
  • SAE AIR5892A-2004 Nonvolatile Exhaust Particle Measurement Techniques
  • SAE AIR5892-2004 Nonvolatile Exhaust Particle Measurement Techniques

European Committee for Standardization (CEN), Exhaust gas detection Exhaust gas detection

  • CEN EN 15308-2008 Characterization of waste — Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
  • EN 15308:2016 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
  • EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
  • EN ISO 20475:2020 Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)

Association of German Mechanical Engineers, Exhaust gas detection Exhaust gas detection

  • VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
  • VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
  • VDI 2462 Blatt 2-2011 Measurement of gaseous emissions - Determination of sulphur trioxide in water vapour containing exhaust gas - Condensation method

Professional Standard - Machinery, Exhaust gas detection Exhaust gas detection

API - American Petroleum Institute, Exhaust gas detection Exhaust gas detection

  • API 4121-1971 IMPROVED INSTRUMENTATION FOR DETERMINATION OF EXHAUST GAS OXYGENATE CONTENT

American Society of Mechanical Engineers (ASME), Exhaust gas detection Exhaust gas detection

Sichuan Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

Professional Standard - Coal, Exhaust gas detection Exhaust gas detection

Zhejiang Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB33/T 310014-2023 Determination of chlorine in waste gas from fixed pollution sources by ion chromatography

Anhui Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB34/T 310014-2023 Determination of chlorine in waste gas from fixed pollution sources by ion chromatography
  • DB34/T 728-2018 Inspection regulations for long-distance natural gas pipelines (direct inspection)

工业和信息化部, Exhaust gas detection Exhaust gas detection

  • HG/T 5016-2016 Determination method of fluorine content in fluorine-containing waste gas
  • QB/T 5570-2021 Paper industry energy detection and evaluation method wastewater treatment system
  • HG/T 5722-2020 Rubber air tightness detector

National Metrological Verification Regulations of the People's Republic of China, Exhaust gas detection Exhaust gas detection

American Society for Testing and Materials (ASTM), Exhaust gas detection Exhaust gas detection

  • ASTM C1207-10(2018) Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
  • ASTM D7045-17 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Exhaust gas detection Exhaust gas detection

  • GB/T 34637-2017 Non-destructive testing—Test methods for bubble leak detection

Chongqing Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB50/T 838-2017 Determination of Triethylamine in Stationary Pollution Source Exhaust Gas by Gas Chromatography
  • DB50/T 837-2017 Determination of ethanethiol in waste gas from stationary pollution sources by gas chromatography
  • DB50/T 679-2016 Determination of VOCS in exhaust gas from stationary pollution sources by gas chromatography-mass spectrometry
  • DB50/T 836-2017 Determination of ethyl acetate in waste gas from stationary pollution sources by gas chromatography

IX-UIC, Exhaust gas detection Exhaust gas detection

Beijing Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB11/T 1367-2016 Determination of methane/total hydrocarbons/non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable hydrogen flame ionization detector method

Fujian Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB35/T 1913-2020 Determination of non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable catalytic oxidation-hydrogen flame ionization detector method
  • DB35/T 1746-2018 Determination of Total Volatile Organic Compounds (TVOC) in Air and Exhaust Gas Freeze Concentration/Gas Chromatography-Mass Spectrometry

CEN - European Committee for Standardization, Exhaust gas detection Exhaust gas detection

  • EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method
  • EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
  • EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases

AENOR, Exhaust gas detection Exhaust gas detection

  • UNE-EN 13185/A1:2004 Non-destructive testing - Leak testing - Tracer gas method
  • UNE-EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
  • UNE-EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
  • UNE-EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • UNE-EN 50402:2006/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems

Professional Standard - Energy, Exhaust gas detection Exhaust gas detection

  • NB/T 11127-2023 Technical specification for scrap detection of in-use steel cord conveyor belts

中国气象局, Exhaust gas detection Exhaust gas detection

NL-NEN, Exhaust gas detection Exhaust gas detection

  • NEN 3235 10.1-1978 Test methods for waste water. Determination of gas production of sludg
  • NEN 6681-1981 Waste water - Volumetric determination of carbon dioxide and oxygen in gases

中华人民共和国国家卫生和计划生育委员会, Exhaust gas detection Exhaust gas detection

  • GB/T 18204.13-2000 Methods for determination of air temperature in public places
  • GB/T 18204.19-2000 Method for measurement of infiltration rates of indoor air in public places
  • GB 17022-1997 Criteria for quality assessment of field semi-quantitative test kit of salt iodine
  • GB/T 18204.6-2000 Methods of microbiological examination for barber's tools-Determination of Coliform bacteria

国家市场监督管理总局、中国国家标准化管理委员会, Exhaust gas detection Exhaust gas detection

  • GB/T 40335-2021 Non-destructive testing—Leak testing—Tracer gas method
  • GB/T 40200-2021 Method of testing the performance of equipment for industrial organic waste gas purification
  • GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases

FI-SFS, Exhaust gas detection Exhaust gas detection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Exhaust gas detection Exhaust gas detection

  • GB 7230-1987 Gas detector tube units
  • GB/T 7230-2008 Gas detector tube measurement system
  • GB/T 4919-1985 Waste water from manufacturing process--Determination of total nitro compounds--Gas chromatographic method
  • GB 4919-1985 Determination of Total Nitro Compounds in Industrial Wastewater by Gas Chromatography

US-FCR, Exhaust gas detection Exhaust gas detection

National Fire Protection Association (NFPA), Exhaust gas detection Exhaust gas detection

  • NFPA 1911-2012 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus (Effective Date: 1/2/2012)
  • NFPA 1911 ERTA-2008 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus

国家发展和改革委员会, Exhaust gas detection Exhaust gas detection

Professional Standard - Agriculture, Exhaust gas detection Exhaust gas detection

  • HJ 1287-2023 Determination of Blackness of Exhaust Gas from Stationary Pollution Sources by Ringelmann Telescope Method
  • LY/T 1612-2023 1m³ climate chamber for formaldehyde detection

Shandong Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB37/T 4432-2021 Determination of volatile aliphatic amines in waste gas from stationary pollution sources by gas chromatography
  • DB37/T 3535-2019 Technical Specifications for Stationary Pollution Source Exhaust Gas Monitoring Point Setting
  • DB37/T 3922-2020 Determination of total hydrocarbons, methane and non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable catalytic oxidation-hydrogen flame ionization detector method
  • DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources

Standard Association of Australia (SAA), Exhaust gas detection Exhaust gas detection

  • AS 4812:2023 Non-destructive examination and discard criteria for wire ropes in mine winding systems
  • AS/NZS 4013:1999 Domestic solid fuel burning appliances - Method for determination of flue gas emission

国家市场监督管理总局, Exhaust gas detection Exhaust gas detection

  • RB/T 042-2020 Electrical inspection and testing requirements for management and technical capability evaluation of inspection and testing institutions

IT-UNI, Exhaust gas detection Exhaust gas detection

GOSTR, Exhaust gas detection Exhaust gas detection

  • GOST R ISO 8178-5-2017 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels

Professional Standard - Railway, Exhaust gas detection Exhaust gas detection

  • TB/T 1912-2005 Allowable Concentration and Measurement of Locomotive Exhaust in Railway Operating Tunnel

中华人民共和国环境保护部, Exhaust gas detection Exhaust gas detection

  • (HJ 711-2014) Solid waste —Determination of phenolic compounds —Gas chromatography

National Aeronautics and Space Administration (NASA), Exhaust gas detection Exhaust gas detection

Jilin Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

Professional Standard - Nuclear Industry, Exhaust gas detection Exhaust gas detection

  • EJ/T 20190-2018 Gas Chromatography Method for Determination of TBP and DBP Concentration in Low-level Organic Waste Liquid

Jiangsu Provincial Standard of the People's Republic of China, Exhaust gas detection Exhaust gas detection

  • DB32/T 4535-2023 Technical Specifications for Rapid Monitoring of Exhaust Particulate Matter from Stationary Pollution Sources

Military Standard of the People's Republic of China-General Armament Department, Exhaust gas detection Exhaust gas detection

  • GJB 533.7-1988 Detection method for 45 components of submarine cabin air. Determination of chlorine content. Calibration tube method
  • GJB 533.10-1988 Detection method for 45 components of submarine cabin air. Determination of ammonia content. Calibration tube method




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved