ZH
RU
ES

s/s+a2

s/s+a2, Total:312 items.

In the international standard classification, s/s+a2 involves: Rubber and plastics products, Iron and steel products, Fibre optic communications, Aircraft and space vehicles in general, Telecommunication systems, Materials for aerospace construction, Valves, Lifting equipment, Clothes, Textile fibres, Measurement of force, weight and pressure, Rubber, Technical drawings, Integrated Services Digital Network (ISDN), Radiocommunications, Components for aerospace construction, Products of the textile industry, Fasteners, Analytical chemistry, Paint ingredients, Aerospace electric equipment and systems, Internal combustion engines, On-board equipment and instruments, Flexible drives and transmissions, Interface and interconnection equipment, Lubricants, industrial oils and related products, Equipment for entertainment, Products of the chemical industry, Organic chemicals, Open systems interconnection (OSI), Microprocessor systems, Electrical wires and cables, Kitchen equipment, Linear and angular measurements, Shipbuilding and marine structures in general, Ground service and maintenance equipment.

U.S. Military Regulations and Norms, s/s+a2

ARMY MIL-S-53012 (2)-1987 SUSPENSION KIT, COLLAPSIBLE HOSELINE [Superseded: ARMY MIL-PRF-52347 D VALID NOTICE 1, ARMY MIL-PRF-52347 D, ARMY MIL-S-52347 C CANC NOTICE 1, ARMY MIL-S-52347 C, ARMY MIL-S-52347 B, ARMY MIL-S-52347 A, ARMY MIL-S-52347]
ARMY MIL-S-49248 B VALID NOTICE 2-2013 Shelter, Electronic Equipment S-639/G and S-640/G
ARMY MIL-S-53012 REINST NOTICE 2-1999 SUSPENSION KIT, COLLAPSIBLE HOSELINE [Superseded: ARMY MIL-PRF-52347 D VALID NOTICE 1, ARMY MIL-PRF-52347 D, ARMY MIL-S-52347 C CANC NOTICE 1, ARMY MIL-S-52347 C, ARMY MIL-S-52347 B, ARMY MIL-S-52347 A, ARMY MIL-S-52347]
ARMY A-A-52209-1996 SCRIBER, DIAMOND POINT [Superseded: ARMY MIL-S-15825 A CANC NOTICE 3, ARMY MIL-S-15825 A VALID NOTICE 2, ARMY MIL-S-15825 A VALID NOTICE 1, ARMY MIL-S-15825 A (1), ARMY MIL-S-15825 A, ARMY MIL-S-15825 CANC NOTICE 1, ARMY MIL-S-15825]
ARMY UFGS-02 55 00-2010 SOLIDIFICATION/STABILIZATION (S/S) OF CONTAMINATED MATERIAL
ARMY A-A-52210-1996 STRAIGHTEDGE, STEEL (MACHINISTS' AND TOOLMAKERS') [Superseded: ARMY MIL-S-15769 C CANC NOTICE 2, ARMY MIL-S-15769 C VALID NOTICE 1, ARMY MIL-S-15769 C, ARMY MIL-S-15769 B, ARMY MIL-S-15769]
ARMY A-A-59279-1998 SODIUM SULFATE, ANHYDROUS, TECHNICAL (FOR AMMUNITION USE) [Superseded: ARMY MIL-S-50004 A CANC NOTICE 2, ARMY MIL-S-50004 A VALID NOTICE 1, ARMY MIL-S-50004 A, ARMY MIL-S-50004]
ARMY MIL-S-49248 B NOTICE 1-1996 SHELTER, ELECTRONIC EQUIPMENT S-639/G& S-640/G
ARMY MIL-S-49248 B-1987 SHELTER, ELECTRONIC EQUIPMENT S-639/G& S-640/G
ARMY MIL-R-49236 A VALID NOTICE 2-2011 Restorer, Pulse Form, TD-1218/G (No S/S Document)
ARMY A-A-59279 VALID NOTICE 1-2003 SODIUM SULFATE, ANHYDROUS, TECHNICAL (FOR AMMUNITION USE) [Superseded: ARMY MIL-S-50004 A CANC NOTICE 2, ARMY MIL-S-50004 A VALID NOTICE 1, ARMY MIL-S-50004 A, ARMY MIL-S-50004]
ARMY A-A-52567 B-2006 SURVEY INSTRUMENT, AUTOMATED, INTEGRATED (AISI) [Replaced: ARMY MIL-S-0053085 A CANC NOTICE 1, ARMY MIL-S-53085, ARMY MIL-S-0053085 A (1), ARMY MIL-S-0053085 A]
ARMY MIL-PRF-53012 A-1999 SUSPENSION KIT, COLLAPSIBLE HOSELINE [Superseded: ARMY MIL-PRF-52347 D VALID NOTICE 1, ARMY MIL-PRF-52347 D, ARMY MIL-S-52347 C CANC NOTICE 1, ARMY MIL-S-52347 C, ARMY MIL-S-52347 B, ARMY MIL-S-52347 A, ARMY MIL-S-52347]
ARMY MIL-S-53012 (1)-1983 SUSPENSION KIT, COLLAPSIBLE HOSELINE [Superseded: ARMY MIL-PRF-52347 D VALID NOTICE 1, ARMY MIL-PRF-52347 D, ARMY MIL-S-52347 C CANC NOTICE 1, ARMY MIL-S-52347 C, ARMY MIL-S-52347 B, ARMY MIL-S-52347 A, ARMY MIL-S-52347]
ARMY MIL-S-53012-1982 SUSPENSION KIT, COLLAPSIBLE HOSELINE [Superseded: ARMY MIL-PRF-52347 D VALID NOTICE 1, ARMY MIL-PRF-52347 D, ARMY MIL-S-52347 C CANC NOTICE 1, ARMY MIL-S-52347 C, ARMY MIL-S-52347 B, ARMY MIL-S-52347 A, ARMY MIL-S-52347]
ARMY MIL-S-55541 G NOTICE 1-1998 SHELTER, ELECTRICAL EQUIPMENT S-250( )/G [Use In Lieu Of: ARMY MIL-S-0055541 H CANC NOTICE 2]
ARMY MIL-DTL-41819/32 D VALID NOTICE 3-2013 Ribbon Attachment, Letter"S"

未注明发布机构, s/s+a2

American Society of Mechanical Engineers (ASME), s/s+a2

ASME SEC VIII D2 ART S-2-2003 Article S-2 Obtaining and Using Code Stamps
ASME SEC VIII D2 ART S-1-2001 Article S-1 Contents and Method of Stamping
ASME SEC VIII D2 ART S-4-2001 Article S-4 Special Requirements for Layered Vessels
ASME SEC VIII D2 ART S-3-2002 Article S-3 Report Forms and Maintenance of Records

US-GSA, s/s+a2

GSA TT-S-171 C (2)-1977 SEALER, FLOOR: LACQUER-TYPE [Use In Lieu Of: GSA TT-S-00171 A]
GSA A-A-3014-2000 STOOLS, FILING AND GENERAL PURPOSE, STEP, STEEL [Superseded: GSA A-A-3116, GSA AA-S-700 A, GSA AA-S-700 INT AMD 3, GSA AA-S-700 INT AMD 2, GSA AA-S-700 INT AMD 1, GSA AA-S-700, GSA AA-S-704 A CANC NOTICE 1, GSA AA-S-704 A INT AMD 4, GSA AA-S-704

(U.S.) Ford Automotive Standards, s/s+a2

FORD S-M2E4610-B-2002 PRESSED WOOD FIBER BOARD COATED WITH HF-ADHESIVE Shown on S-M2E4610-A
FORD S-M2E4710-B-2003 MOLDED WOOD FIBER BOARD ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on S-M2E4710-A
FORD WSK-M2P149-A1-1993 PAINT PERFORMANCE, PRIMED PARTS, 240 H SALT SPRAY, EXTERIOR
FORD WSK-M2G353-A-2003 ADHESIVE, SOLVENT RELEASE ***TO BE USED WITH FORD WSS-M99P1111-A***

Defense Logistics Agency, s/s+a2

DLA MIL-S-11310 E NOTICE 2-1997 STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION [Use In Lieu Of: DLA MIL-S-0011310 C] [Superseded: SAE AMS-S-11310B, SAE AMS-S-11310A, SAE AMS-S-11310]
DLA A-A-55190-1993 SEWING KIT [Superseded: DLA MIL-S-3276 H CANC NOTICE 3, DLA MIL-S-3276 H CANC NOTICE 2, DLA MIL-S-3276 H NOTICE 1, DLA MIL-S-3276 H, DLA MIL-S-3276 G, DLA MIL-S-3276 F, DLA MIL-S-3276 E (4), DLA MIL-S-3276 E (2), DLA MIL-S-3276 E]
DLA A-A-59336 VALID NOTICE 1-2005 SAW, BAND, METAL, CUTTING, VERTICAL, CONTOUR [Superseded: DLA MIL-S-24034 E CANC NOTICE 1, DLA MIL-S-24034 E, DLA MIL-S-24034 D, DLA MIL-S-24034 C (2), DLA MIL-S-24034 C (1), DLA MIL-S-24034 C, DLA MIL-S-24034 B, DLA MIL-S-24034 A, DLA MIL-S-240
DLA A-A-59336-1999 SAW, BAND, METAL, CUTTING, VERTICAL, CONTOUR [Superseded: DLA MIL-S-24034 E CANC NOTICE 1, DLA MIL-S-24034 E, DLA MIL-S-24034 D, DLA MIL-S-24034 C (2), DLA MIL-S-24034 C (1), DLA MIL-S-24034 C, DLA MIL-S-24034 B, DLA MIL-S-24034 A, DLA MIL-S-240
DLA A-A-59563-2004 SODIUM CARBONATE, ANHYDROUS, TECHNICAL [Superseded: DLA O-S-571 G CANC NOTICE 1, DLA O-S-571 G, DLA O-S-571 F INT AMD 1, DLA O-S-571 F, DLA O-S-571 E INT AMD 2, DLA O-S-571 E (1), DLA O-S-571 E, DLA O-S-571 D, DLA O-S-571 B (1), DLA O-S-571 B]
DLA A-A-59436-1999 SEPARATORS, OIL AND WATER, COMPRESSED AIR [Superseded: DLA MIL-S-12928 H CANC NOTICE 1, DLA MIL-S-12928 H, DLA MIL-S-12928 G, DLA MIL-S-12928 F, DLA MIL-S-12928 E, DLA MIL-S-12928 D, DLA MIL-S-12928 C]
DLA A-A-59343 VALID NOTICE 1-2004 SLING, PALLET [Superseded: DLA MIL-S-3905 D CANC NOTICE 1, DLA MIL-S-3905 D (1), DLA MIL-S-3905 D, DLA MIL-S-3905 C, DLA MIL-S-3905 B, DLA MIL-S-3905 A (1), DLA MIL-S-3905 A]
DLA A-A-59343-1999 SLING, PALLET [Superseded: DLA MIL-S-3905 D CANC NOTICE 1, DLA MIL-S-3905 D (1), DLA MIL-S-3905 D, DLA MIL-S-3905 C, DLA MIL-S-3905 B, DLA MIL-S-3905 A (1), DLA MIL-S-3905 A]
DLA A-A-55297-1999 SHIRT, MAN'S (POLYESTER/COTTON, TROPICAL, SHORT SLEEVE) [Superseded: DLA MIL-S-17618 H CANC NOTICE 1, DLA MIL-S-17618 H, DLA MIL-S-17618 G (1), DLA MIL-S-17618 G, DLA MIL-S-17618 F (1), DLA MIL-S-17618 F, DLA MIL-S-17618 D (2), DLA MIL-S-17618 E
DLA A-A-59556-2000 SAWS, BAND, CUTOFF, VERTICAL, TILT-FRAME, TRAVELING [Superseded: DLA MIL-S-24035 E CANC NOTICE 1, DLA MIL-S-24035 E, DLA MIL-S-24035 D, DLA MIL-S-24035 C (2), DLA MIL-S-24035 C (1), DLA MIL-S-24035 C, DLA MIL-S-24035 B, DLA MIL-S-24035 A]
DLA A-A-55283-1995 SHIRT, WOMAN'S, TUCK-IN [Superseded: DLA MIL-S-44093 B CANC NOTICE 1, DLA MIL-S-44093 B, DLA MIL-S-44093 A (2), DLA MIL-S-44093 A (1), DLA MIL-S-44093 A, DLA MIL-S-44093]
DLA A-A-59367 VALID NOTICE 1-2005 SHEARING MACHINES, METAL SQUARING, MANUALLY OPERATED [Superseded: DLA MIL-S-23244 D CANC NOTICE 1, DLA MIL-S-23244 D, DLA MIL-S-23244 C (1), DLA MIL-S-23244 C, DLA MIL-S-23244 B, DLA MIL-S-23244 A]
DLA A-A-59367-1999 SHEARING MACHINES, METAL SQUARING, MANUALLY OPERATED [Superseded: DLA MIL-S-23244 D CANC NOTICE 1, DLA MIL-S-23244 D, DLA MIL-S-23244 C (1), DLA MIL-S-23244 C, DLA MIL-S-23244 B, DLA MIL-S-23244 A]
DLA A-A-59123-2000 SODIUM DICHROMATE DIHYDRATE, TECHNICAL [Superseded: DLA O-S-595 B CANC NOTICE 1, DLA O-S-595 B (1), DLA O-S-595 B, DLA O-S-595 A (3), DLA O-S-595 A, DLA O-S-595]
DLA A-A-59548-2000 SHIRT, COLD WEATHER, SYNTHETIC FLEECE [Superseded: DLA MIL-S-44163 B CANC NOTICE 1, DLA MIL-S-44163 B (1), DLA MIL-S-44163 B, DLA MIL-S-44163 A, DLA MIL-S-44163]
DLA A-A-59475-1999 SCALES, DIAL AND BEAM INDICATING, BAKER'S, DOUGH PIECE CHECKING [Superseded: DLA MIL-S-11183 F CANC NOTICE 1, DLA MIL-S-11183 F, DLA MIL-S-11183 E, DLA MIL-S-11183 D (1), DLA MIL-S-11183 D, DLA MIL-S-11183 C, DLA MIL-S-11183 B]
DLA A-A-59412-1999 SWAGING MACHINE, ROTARY, FLOOR-MOUNTED [Superseded: DLA MIL-S-80035 C CANC NOTICE 1, DLA MIL-S-80035 C, DLA MIL-S-80035 B, DLA MIL-S-80035 A, DLA MIL-S-80035]
DLA A-A-59593-2000 SOCKS, EXTREME COLD WEATHER [Superseded: DLA MIL-S-38004 C CANC NOTICE 1, DLA MIL-S-38004 C, DLA MIL-S-38004 B, DLA MIL-S-38004 A (1), DLA MIL-S-38004 A]
DLA A-A-59269 A VALID NOTICE 1-2004 SCALES, DRAFTING AND SCALES, PLOTTING [Superseded: DLA GG-S-161 D CANC NOTICE 1, DLA GG-S-161 D SUPP 1, DLA GG-S-161 D, DLA GG-S-161 C (2), DLA GG-S-161 C (1), DLA GG-S-161 C SUPP 1, DLA GG-S-161 C, DLA GG-S-161 B NOTICE 2, DLA GG-S-161 B INT A
DLA A-A-59269 A-1999 SCALES, DRAFTING AND SCALES, PLOTTING [Superseded: DLA GG-S-161 D CANC NOTICE 1, DLA GG-S-161 D SUPP 1, DLA GG-S-161 D, DLA GG-S-161 C (2), DLA GG-S-161 C (1), DLA GG-S-161 C SUPP 1, DLA GG-S-161 C, DLA GG-S-161 B NOTICE 2, DLA GG-S-161 B INT A
DLA A-A-59531-1999 SLACKS, MATERNITY [Superseded: DLA MIL-S-29377 A CANC NOTICE 1, DLA MIL-S-29377 A, DLA MIL-S-29377 VALID NOTICE 1, DLA MIL-S-29377]
DLA A-A-59238 VALID NOTICE 1-2004 SHEARING, MACHINES, METAL, CIRCULAR, POWER-DRIVEN [Superseded: DLA MIL-S-80093 B CANC NOTICE 1, DLA MIL-S-80093 B, DLA MIL-S-80093 A, DLA MIL-S-80093 (1), DLA MIL-S-80093]
DLA A-A-59238-1998 SHEARING, MACHINES, METAL, CIRCULAR, POWER-DRIVEN [Superseded: DLA MIL-S-80093 B CANC NOTICE 1, DLA MIL-S-80093 B, DLA MIL-S-80093 A, DLA MIL-S-80093 (1), DLA MIL-S-80093]
DLA A-A-59526-1999 SHEATH, MACHETE (FOR 18 INCH LONG, 2-1/4 INCH WIDE BLADE) [Superseded: DLA MIL-S-2329 C CANC NOTICE 1, DLA MIL-S-2329 C CANC NOTICE 1, DLA MIL-S-2329 C INT AMD 1, DLA MIL-S-2329 C, DLA MIL-S-2329 B (1), DLA MIL-S-2329 B]
DLA A-A-55472 C-2007 FUSE, PLUG, (TYPE S), TIME DELAY, TYPE S BASE
DLA A-A-59662-2001 CHAIN SAW (PORTABLE, PNEUMATIC-MOTOR-DRIVEN) [Superseded: DLA GGG-S-62 D CANC NOTICE 1, DLA GGG-S-62 D, DLA GGG-S-62 B, DLA GGG-S-62 A]
DLA A-A-59663-2001 CHAIN SAW (PORTABLE, GASOLINE-ENGINE-DRIVEN) [Superseded: DLA GGG-S-62 D CANC NOTICE 1, DLA GGG-S-62 D, DLA GGG-S-62 B, DLA GGG-S-62 A]
DLA A-A-59458-2000 STITCHER, BOOK AND PAMPHLET, SINGLE STITCHING HEAD, SADDLE AND FLAT TABLE [Superseded: DLA MIL-S-15701 D CANC NOTICE 1, DLA MIL-S-15701 D, DLA MIL-S-15701 C, DLA MIL-S-15701 B (1), DLA MIL-S-15701 B]
DLA A-A-59414-2000 SIRENS, OUTDOOR WARNING, ELECTRONIC AND ELECTRIC-MOTOR-DRIVEN [Superseded: DLA MIL-S-503 B CANC NOTICE 1, DLA MIL-S-503 B, DLA MIL-S-503 A, DLA JAN-S-503]
DLA MIL-DTL-5675 C-2005 SHACKLE: CABLE, AIRCRAFT [Superseded: DLA MIL-DTL-5675 C, DLA MIL-S-5675 B REINST NOTICE 2, DLA MIL-S-5675 B CANC NOTICE 1, DLA MIL-S-5675 B, DLA MIL-S-5675 A]
DLA A-A-59561-2000 SHIM, SOLID, ROUND [Superseded: DLA MIL-S-70334/1 CANC NOTICE 2, DLA MIL-S-70334/1 VALID NOTICE 1, DLA MIL-S-70334/1]
DLA DSCC-DWG-99003 REV A-2006 SEMICONDUCTOR DEVICE, THYRISTOR, REVERSE BLOCKING, SILICON, TYPES 2N1792 AND 2N1910 FAMILIES [Superseded: DLA MIL-S-19500/204 F CANC NOTICE 2, DLA MIL-PRF-19500/204 F NOTICE 1, DLA MIL-S-19500/204 F (2), DLA MIL-S-19500/204 F, DLA MIL-S-19500/204 E

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, s/s+a2

VOL 2000 S PT 1@2@3 SUPPL-2000 Fixed-Satellite Service (Supplement 1 to S Series Parts 1@2@ and 3)
VOL2000 S PT1@2@3 SUPPL 1-2000 Fixed-Satellite Service (Supplement 1 to S Series Parts 1@2@ and 3; Study Group 4)
RAPPORT BS.2004 FRENCH-1995 Digital Broadcasting Systems Intended for AM Bands
RAPPORT 1028 FRENCH-1986 3 kHz DUPLEX SEPARATION FOR DSC CHANNELS IN THE BAND 435-526.5 kHz
ITU-R M.257-3 FRENCH-1995 SEQUENTIAL SINGLE FREQUENCY SELECTIVE-CALLING SYSTEM FOR USE IN THE MARITIME MOBILE SERVICE
ITU-R V.608-2 SPANISH-1993 LETTER SYMBOLS FOR TELECOMMUNICATIONS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, s/s+a2

GB/T 13997-1999 Technical requirement for 2048kbit/s, 8448kbit/s, 34368kbit/s, 139264kbit/s Optical line terminals
GB/T 10857-2005 Steel roller chains,types S and C,attachments and sprockets
GB/T 10662-2000 Disperse deep blue S-3BG

International Telecommunication Union (ITU), s/s+a2

ITU-R VOL 2000 S PT 1,2,3 SUPPL-2000 Fixed-Satellite Service Supplement 1 to S Series Parts 1,2, and 3
ITU-R VOL2000 S PT1,2,3 SUPPL 1-2000 Fixed-Satellite Service
ITU-T G.796 CORR.1-1998 Characteristics of a 64 kbit/s Cross-Connect Equipment with 2048 kbit/s Access Ports - Corrigendum 1 - Series G: Transmission Systems and Media, Digital Systems and Networks - Digital Transmission Systems - Terminals Equipments - Other Terminal Equipment
ITU-T G.796-1992 Characteristics of a 64 kbit/s Cross-Connect Equipment with 2048 kBit/s Access Ports (Study Group XV) 13 pp
ITU-T G.735-1988 Characteristics of Primary PCM Multiplex Equipment Operating at 2048 kbit/s and Offering Synchronous Digital Access at 384 kbit/s and/or 64 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 8 pp
ITU-T G.737-1988 Characteristics of an External Access Equipment Operating at 2048 kbit/s Offering Synchronous Digital Access at 384 kbit/s and/or 64 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 7 pp
ITU-T G.738-1988 Characteristics of Primary PCM Multiplex Equipment Operating at 2048 kbit/s and Offering Synchronous Digital Access at 320 kbit/s and/or 64 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 8 pp
ITU-T G.739-1988 Characteristics of an External Access Equipment Operating at 2048 kbit/s Offering Synchronous Digital Access at 320 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipments Study Groups XV and XVIII; 7 pp
ITU-T G.737-1993 CHARACTERISTICS OF AN EXTERNAL ACCESS EQUIPMENT OPERATING AT 2048 kbit/s OFFERING SYNCHRONOUS DIGITAL ACCESS AT 384 kbit/s AND/OR 64 kbit/s
ITU-T G.739-1993 CHARACTERISTICS OF AN EXTERNAL ACCESS EQUIPMENT OPERATING AT 2048 kbit/s OFFERING SYNCHRONOUS DIGITAL ACCESS AT 320 kbit/s AND/OR 64 kbit/s

United States Navy, s/s+a2

NAVY SS-S-200E (2)-1993 SEALANTS, JOINT, TWO-COMPONENT, JET-BLAST-RESISTANT, COLD-APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT [Use In Lieu Of: NAVY SS-S-00200C (2)]
NAVY MIL-S-8512 D REINST NOTICE 2-2002 SUPPORT EQUIPMENT, AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF [Use In Lieu Of: NAVY MIL-S-008512 C]
NAVY SS-S-200 E (2)-1993 SEALANTS, JOINT, TWO-COMPONENT, JET-BLAST-RESISTANT, COLD-APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT [Use In Lieu Of: NAVY SS-S-00200 C (2)]
NAVY MS16171 REV C-1967 WASHER, NONMETALLIC, SLIP, NYLON STUFFING TUBE [Use: NAVY MIL-S-19622/11 G CANC NOTICE 1, NAVY MIL-S-19622/11 G, NAVY MIL-S-19622/11 F, NAVY MIL-S-19622/11 E, NAVY MIL-S-19622/11 D, NAVY MIL-S-19622/11 C, NAVY MIL-S-19622/11 B, NAVY MIL-S-19622/1
NAVY MS16174 REV C-1967 BUSHING, NEOPRENE, NYLON STUFFING TUBE [Use: NAVY MIL-S-19622/13 E CANC NOTICE 1, NAVY MIL-S-19622/13 E, NAVY MIL-S-19622/13 D, NAVY MIL-S-19622/13 C, NAVY MIL-S-19622/13 B, NAVY MIL-S-19622/13, NAVY MIL-S-19622/13 A]
NAVY A-A-50577-1997 SEMITRAILERS, REAR DUMP; SINGLE AXLE AND TANDEM AXLE [Superseded: NAVY MIL-S-28611 D CANC NOTICE 1, NAVY MIL-S-28611 D, NAVY MIL-S-28611 C, NAVY MIL-S-28611 B, NAVY MIL-S-28611 A, NAVY MIL-S-28611]
NAVY MS17270 REV B-1967 STUFFING TUBE, NYLON, SIZE 3 [Use: NAVY MIL-S-19622/1 B NOTICE 1, NAVY MIL-S-19622/1 B, NAVY MIL-S-19622/1 A, NAVY MIL-S-19622/1]
NAVY MS16170 REV C-1967 CAP, NYLON STUFFING TUBE [Use: NAVY MIL-S-19622/10 B CANC NOTICE 1, NAVY MIL-S-19622/10 B, NAVY MIL-S-19622/10 A, NAVY MIL-S-19622/10]
NAVY MS17042 REV B-1967 STUFFING TUBE, NPT, NYLON, SIZE 5 [Use: NAVY MIL-S-19622/3 B NOTICE 1, NAVY MIL-S-19622/3 B, NAVY MIL-S-19622/3 A, NAVY MIL-S-19622/3]
NAVY MS17043 REV B-1967 STUFFING TUBE, NPT, NYLON, SIZE 6 [Use: NAVY MIL-S-19622/3 B NOTICE 1, NAVY MIL-S-19622/3 B, NAVY MIL-S-19622/3 A, NAVY MIL-S-19622/3]
NAVY MS17044 REV B-1967 STUFFING TUBE, NPT, NYLON, SIZE 7 [Use: NAVY MIL-S-19622/3 B NOTICE 1, NAVY MIL-S-19622/3 B, NAVY MIL-S-19622/3 A, NAVY MIL-S-19622/3]
NAVY MS17045 REV B-1967 STUFFING TUBE, NPT, NYLON, SIZE 8 [Use: NAVY MIL-S-19622/3 B NOTICE 1, NAVY MIL-S-19622/3 B, NAVY MIL-S-19622/3 A, NAVY MIL-S-19622/3]
NAVY MS17046 REV B-1967 STUFFING TUBE, NPT, NYLON, SIZE 9 [Use: NAVY MIL-S-19622/3 B NOTICE 1, NAVY MIL-S-19622/3 B, NAVY MIL-S-19622/3 A, NAVY MIL-S-19622/3]
NAVY MS16169 REV C-1967 LOCKNUT, NYLON STUFFING TUBE [Use: NAVY MIL-S-19622/9 A CANC NOTICE 1, NAVY MIL-S-19622/9 A, NAVY MIL-S-19622/9]
NAVY MS16175 REV C-1967 BODY, NYLON STUFFING TUBE, 90 DEG. [Use: NAVY MIL-S-19622/6 A CANC NOTICE 1, NAVY MIL-S-19622/6 A, NAVY MIL-S-19622/6]
NAVY MS16176 REV C-1967 LOCKNUT, NYLON STUFFING TUBE, 90 DEG. [Use: NAVY MIL-S-19622/15 A CANC NOTICE 1, NAVY MIL-S-19622/15 A, NAVY MIL-S-19622/15]

Professional Standard - Post and Telecommunication, s/s+a2

YD/T 620-1998 Technical conditions of 2048kbit/s, 8448kbit/s, 34368kbit/s and 139264kbit/s transmission analyzers
YD/T 986-1998 Technical conditions of 155Mb/s and 622Mb/s optical transceiver stations - models
YD/T 878-1996 Requirement for networking of 64kbit/s cross connection equipment at 2048kbit/s access port
YD/T 4378.1-2023
YD/T 1274-2003 Technical specification for optical Wavelength Divison Multiplexing (WDM) system -160×10Gb/s、80×10Gb/s part
YD/T 1143-2001 Technical requirements of optical wavelength divison multiplexing(WDM)system—16×10Gb/s and 32×10Gb/s parts

IT-UNI, s/s+a2

UNI F.A.23-1944

CZ-CSN, s/s+a2

CSN 67 4254-1960 Thinner S 6004 for paints S 1004 nd S 2016
CSN 05 5397-1987 Welding wire S 15Cr5Mo
CSN 05 5372-1987 Welding wire S 2
CSN 05 5373-1987 Welding wire S 3
CSN 13 8920-1974 S-bends
CSN 05 5371-1987 Welding wire S 1
CSN 05 5377-1987 Welding wire S Mo-4
CSN 05 5381-1987 Welding wire S Cr2Mol-36
CSN 05 5263-1986 Electrode E NiFe10-S
CSN ON 67 3805-1961
CSN 05 5393-1987 Welding wire S Ni2MnlMo-35
CSN 05 5281-1985 Electrode E CuSn6-S
CSN 05 5379-1974 Welding wire S MoCr - 10
CSN 05 5375-1987 Welding wire S MnlMo-23
CSN 05 5378-1974 Welding wíre S MoCr - 14
CSN 05 5291-1985 Electrode E Al-S
CSN 05 5293-1985 Electrode E A1Si12-S
CSN 68 6264-1962 S-Hydroxyquinoline
CSN 05 5376-1974 Welding wire S Mo - 2
CSN 05 5380-1987 Welding wire S MnlCrMo-25
CSN 05 5262-1986 Elektrode E NiFe-S
CSN 05 5292-1985 Eleotrode E A1Si6-S
CSN 05 5391-1987 Welding wire S CrMoV-13
CSN 05 5392-1987 Welding wire S MnlNiMoV-20
CSN 05 5374-1987 Welding wire S MnlMo-19
CSN 05 5394-1987 Welding wire S Ni2Mnl-37
CSN 67 3802-1985 Synthetic Lacquer S 1002
CSN 05 5389-1987 Welding wire S Ni2MnlCrMo-49
CSN 67 3900-1985 Synthetic pnmer S 2000
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 35 8921-1973 Electronic tube base S 13/17
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 05 5383-1981 Welding wire S 16 Cr 17 Ti
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 01 4405-1979 Tolerances of form and of position. Numerical values
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5833-1980 Thinner S 6019 for paints
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 3903-1985 Primer for light metals S 2003
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 35 8905-1962 Electronic tube base S 9/25

Society of Automotive Engineers (SAE), s/s+a2

SAE CPGM2_15S10E22-2014 J1349 Certified Power Engine data for Chevrolet ECOTEC Gen 2 LCV as used in 2015MY Chevrolet S-10 E22 Fuel - Level 2
SAE CPGM2_15S10E100-2014 J1349 Certified Power Engine data for Chevrolet ECOTEC Gen 2 LCV as used in 2015MY Chevrolet S-10 E100 Fuel - Level 2
SAE J1939/14-2022 Physical Layer, 500 kbit/s

German Institute for Standardization, s/s+a2

DIN EN 190102:1996-11 Family specification - TTL Schottky digital integrated circuits - Series 54 S, 64 S, 74 S, 84 S; German version EN 190102:1994

GM Europe, s/s+a2

GME QK 007000-1993 S/EB/S - Material Types (English/German)

US-FCR, s/s+a2

FCR UFGS-02 55 00-2010 SOLIDIFICATION/STABILIZATION (S/S) OF CONTAMINATED MATERIAL
FCR FED H-08-4 VOL 1 70A-1970 CABINETS, NURSE SERVER TYPES S-1 & S-2, DETAILS

Professional Standard - Chemical Industry, s/s+a2

HG/T 2282-1992 Disperse Scarlet S-3GL (Disperse Scarlet S-3GFL)
HG/T 2591-1994 Resist Salt S
HG/T 3428-2000 Disperse Red S-R
HG/T 3429-2000 Disperse Red S-5BL
HG/T 3508-1999 Emulsifier S-80
HG/T 3508-2010 Emulsifier S-80
HG/T 4305-2012 Emulsifier S-20
HG/T 4306-2012 Emulsifier S-40
HG/T 4307-2012 Emulsifier S-65
HG/T 2500-2011 Emulsifier S-60
HG/T 2500-1993 Emulsifier S-60
HG/T 3430-2000 Disperse Orange S-4RL
HG/T 2282-2003 Disperse Scarlet S-3GL

工业和信息化部, s/s+a2

YD/T 986-2018 155Mb/s and 622Mb/s optical transceiver module
YD/T 2804.5-2019 40Gbit/s/100Gbit/s intensity modulated pluggable optical transceiver module Part 5: 4×25Gbit/s CFP2
YD/T 4069-2022 25Gbit/s and 50Gbit/s optical transport network (OTN) interface technical requirements
HG/T 5140-2016 Disperse Red S-BWF
HG/T 5001-2016 Emulsifier S-85
YD/T 3357.2-2018 100Gb/s QSFP28 optical transceiver module Part 2: 4×25Gb/s LR4
YD/T 3357.1-2018 100Gb/s QSFP28 optical transceiver module Part 1: 4×25Gb/s SR4
YD/T 3357.3-2018 100Gb/s QSFP28 optical transceiver module Part 3: 4×25Gb/s CLR4
YD/T 3357.4-2020 100Gb/s QSFP28 optical transceiver module Part 4: 4×25Gb/s PSM4
YD/T 3357.5-2020 100Gb/s QSFP28 optical transceiver module Part 5: 4×25Gb/s ER4 Lite
YD/T 3356.2-2020 Optical transceiver components at 100Gb/s and above Part 2: 4×25Gb/s LR4
YD/T 3356.1-2018 Optical transceiver components for 100Gb/s and above Part 1: 4×25Gb/s CLR4
YD/T 3712.1-2020 200Gb/s intensity modulated optical transceiver module Part 1: 4×50Gb/s
YD/T 3539.2-2021 400Gbit/s phase modulated optical transceiver module Part 2: 1×400Gbit/s
YD/T 3539.1-2019 400Gbit/s phase modulated optical transceiver module Part 1: 2×200Gbit/s

化学工业部, s/s+a2

HG 2282-1992 Disperse Big Red S-3GL (Disperse Big Red S-3GFL)

PT-IPQ, s/s+a2

NP 2955/3-1985

BR-ABNT, s/s+a2

ABNT EB-119-1962

Institute of Electrical and Electronics Engineers (IEEE), s/s+a2

IEEE 802.3CP-2021 Ethernet Amendment 14: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s Optical Access PHYs (IEEE Computer Society)
IEEE P802.3cp/D3.0, January 2021 IEEE Draft Standard for Ethernet Amendment: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s Optical Access PHYs
IEEE Std 802.3cp-2021 IEEE Standard for Ethernet -- Amendment 14: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s Optical Access PHYs
SMPTE ST 2082-30:2017 ST 2082-30:2017 - SMPTE Standard - Transport of Multiple 6Gb/s, 3Gb/s or 1.5Gb/s signals on a 12G-SDI link
ST 2082-30:2017 ST 2082-30:2017 - SMPTE Standard - Transport of Multiple 6Gb/s, 3Gb/s or 1.5Gb/s signals on a 12G-SDI link
IEEE P802.3cp/D3.1, April 2021 IEEE Draft Standard for Ethernet Amendment 14: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s Optical Access PHYs
IEEE P802.3ck/D3.1, March 2022 IEEE Draft Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Based on 100 Gb/s Signaling
IEEE Std 802.3ck-2022 IEEE Standard for Ethernet Amendment 4: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Based on 100 Gb/s Signaling
IEEE P802.3ck/D3.0, December 2021 IEEE Draft Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Based on 100 Gb/s Signaling
IEEE P802.3cd/D3.2, March 2018 IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE S IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.1, February 2018 IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE Std 802.3cd-2018 IEEE Standard for Ethernet - Amendment 3: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE S IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.0, November 2017 IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.4, July 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.3, June 2018 (Amendment of IEEE Std 802.3-201x as amended by IEEE Std 802.3cb-201x IEEE Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cp/D3.2, May 2021 IEEE Approved Draft Standard for Ethernet Amendment 14: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s Optical Access PHYs
IEEE P802.3ck/D3.3, June 2022 IEEE Approved Draft Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Based on 100 Gb/s Signaling
IEEE Std 802.3db-2022 IEEE Standard for Ethernet - Amendment 3: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Optical Fiber using 100 Gb/s Signaling
IEEE Std 802.3cn-2019 IEEE Standard for Ethernet - Amendment 4: Physical Layers and Management Parameters for 50Gb/s, 200Gb/s, and 400Gb/s Operation over Single-Mode Fiber
IEEE P802.3db/D3.0, March 2022 IEEE Draft Standard for Ethernet - Amendment 4: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Optical Fiber using 100 Gb/s Signaling
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3cd/D3.5, September 2018 (Amendment of IEEE Std 802.3-2018 as amended by IEEE Std 802.3cb- IEEE Approved Draft Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation
IEEE P802.3db/D3.1, June 2022 IEEE Draft Standard for Ethernet - Amendment 3: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Optical Fiber using 100 Gb/s Signaling

North Atlantic Treaty Organization Standards Agency, s/s+a2

STANAG 4591-2008 THE 600 BIT/S, 1200 BIT/S AND 2400 BIT/S NATO INTEROPERABLE NARROW BAND VOICE CODER

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, s/s+a2

ITU-T K.22 FRENCH-1995 OVERVOLTAGE RESISTIBILITY OF EQUIPMENT CONNECTED TO AN ISDN T/S BUS
ITU-T G.737 SPANISH-1993 CARACTER?STICAS DEL EQUIPO DE ACCESO EXTERIOR QUE FUNCIONA A 2048 kbit/s Y QUE OFRECE ACCESO DIGITAL S?NCRONO A 384 kbit/s Y/O 64 kbit/s
ITU-T G.931 SPANISH-1988 SECCIONES DE L?NEA DIGITAL A 3152 kbit/s

Korean Agency for Technology and Standards (KATS), s/s+a2

KS M 8226-2015 Alizarin red S
KS M 8226-2015(2020) Alizarin red S
KS M 8226-1981 Alizarin red S

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., s/s+a2

IEEE 802.3 PART 3-2000 10 Mb/s@ 100 Mb/s@ 1000 Mb/s@ MAC Control@ and Link Aggregation Management (IEEE Computer Society Document)
IEEE P802.3CD/D3.3-2018 Ethernet Amendment 3: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s@ 100 Gb/s@ and 200 Gb/s Operation (IEEE Computer Society)
IEEE 802.3CD-2018 Ethernet Amendment 3: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s@ 100 Gb/s@ and 200 Gb/s Operation (IEEE Computer Society)

International Organization for Standardization (ISO), s/s+a2

ISO 487:1976 Steel roller chains, type S 32 to S 88, with their associated chain wheels

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, s/s+a2

CEPT T/L 03-03-1981 Multiplex Avec Acces De Donnees (64 Kbit/s Oun X 64 Kbit/s)

RU-GOST R, s/s+a2

GOST 8463-1976 Oil C-220. Specifications

Group Standards of the People's Republic of China, s/s+a2

T/STIC 110008-2021 S shaped Zither with 21 strings

HU-MSZT, s/s+a2

Professional Standard - Speciality, s/s+a2

ZB G73003-1988 Emulsifier S-8

American National Standards Institute （ANSI), s/s+a2

ANSI/TIA/EIA 785-1-2002 100 Mb/s Layer Medium Dependent Sublayer and 10 Mbs and 100 Mbs Auto-Negotiation on 850 mm Fiber Optics - Addendum 1
ANSI/TIA/EIA 785-2001 100 Mb/s Physical Layer Medium Dependent Sublayer and 10 Mb/s and 100 Mb/s Auto-Negotiation on 850 n, Fiber Optics

VDE - VDE Verlag GmbH@ Berlin@ Germany, s/s+a2

VDE 0418-3-22-2017 Wechselstrom-Elektrizitaetszaehler - Besondere Anforderungen - Teil 22: Statische Wirkverbrauchszaehler der Genauigkeitsklassen 0@1 S@ 0@2 S und 0@5 S (IEC 13/1720/CD:2016)
VDE 0418-3-22-2018 Wechselstrom-Elektrizitaetszaehler - Besondere Anforderungen - Teil 22: Statische Wirkverbrauchszaehler der Genauigkeitsklassen 0@1 S@ 0@2 S und 0@5 S (IEC 13/1758/CD:2018); Text Deutsch und Englisch

FI-SFS, s/s+a2

SFS C.6.13-1959

(U.S.) Telecommunications Industries Association , s/s+a2

TIA-785-1-2002 100 Mb/s Layer Medium Dependent Sublayer and 10 Mb/s and 100 Mb/s Auto-Negotiation on 850nm Fiber Optics-Addendum 1 (Addendum 1 to TIA/EIA-785)

PL-PKN, s/s+a2

Professional Standard - Electron, s/s+a2

SJ 2559-1984 Specification for S-100 bus

Aerospace Industries Association/ANSI Aerospace Standards, s/s+a2

AIA/NAS NAS 1090-1991 Hook, Chain, S (Rev. 3)
AIA/NAS NASM21472-2011 SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-S-21472 C CANC NOTICE 1, DLA MIL-S-21472 C, DLA MIL-S-21472 B, DLA MIL-S-21472 A]

Japanese Industrial Standards Committee (JISC), s/s+a2

JIS K 8489:1994 s-Diphenylcarbazone
JIS K 8057:2010 Alizarin red S (Reagent)
JIS F 3907:1987 Ship's s rings for chainlet

Professional Standard - Agriculture, s/s+a2

1744药典一部-2010 Appendix IS Lotion

European Committee for Standardization (CEN), s/s+a2

CEN/TS 17946:2023 Helmets for S-EPAC riders

TIA - Telecommunications Industry Association, s/s+a2

TIA/EIA-785 ERTA-2002 100 Mb/s Physical Layer Medium Dependent Sublayer and 10 Mb/s and 100 Mb/s Auto-Negotiation on 850 nm Fiber Optics
TIA/EIA-785-2001 100 Mb/s Physical Layer Medium Dependent Sublayer and 10 Mb/s and 100 Mb/s Auto-Negotiation on 850 nm Fiber Optics

Association Francaise de Normalisation, s/s+a2

NF EN IEC 62053-22/A11:2021 Equipement de comptage de l'électricité - Exigences particulières - Partie 22 : compteurs statiques d'énergie active en courant alternatif (classes 0,1 S, 0,2 S et 0,5 S)
NF EN IEC 62053-22:2021 Équipement de comptage de l'électricité - Exigences particulières - Partie 22 : compteurs statiques d'énergie active en courant alternatif (classes 0,1 S, 0,2 S et 0,5 S)
NF Z88-686*NF ETS 300686:2000 Business TeleCommunications (BTC) - 34 Mbit/s and 140 Mbit/s digital leased lines (D34U, D34S, D140U and D140S) - Network interface presentation.
NF L55-513:1970 Lampes subminiatures à culot S 3s

IN-BIS, s/s+a2

IS 3915-1966

Standard Association of Australia （SAA）, s/s+a2

AS 1284.9:1993 Electricity metering Part 9: Electronic watthour meters (Classes 0.2 S and 0.5 S)

IPC - Association Connecting Electronics Industries, s/s+a2

IPC TM-650 5.5.3.2-1998 Specimen S - Hole Reliability

GM North America, s/s+a2

GM GMP.S/MA.002-1990 S/MA - Terpolymer
GM GMP.PC+ S/MA.003-1991 PC + S/MA - Medium Heat Resistant

Professional Standard - Aviation, s/s+a2

HB 3266-1989 Turning wheel wrench S＝10~18
HB 3258-1989 Double-purpose S＝8~32
HB 3039-1977 Single head wrench s=3.2～12
HB 3040-1977 Single head wrench s=32～80
HB 3051-1977 Ratchet wrench S=17～24
HB 3041-1977 Double-ended wrench s=3.2～55

AIA/NAS - Aerospace Industries Association of America Inc., s/s+a2

NAS1090-1991 Hook@ Chain@ S (Rev 3)
NAS1090-2010 HOOK@ CHAIN@ S (Rev 4)