Batch-to-batch and box-to-box variance

Batch-to-batch and box-to-box variance, Total:246 items.

In the international standard classification, Batch-to-batch and box-to-box variance involves: Optics and optical measurements, Storage equipment, Linear and angular measurements, Elements of buildings, Bearings, Telecommunication systems, Interface and interconnection equipment, Test conditions and procedures in general, Electrical wires and cables, Cutting tools, Screw threads, Construction materials, Space systems and operations, Services, Company organization and management, Information technology (IT) in general, Shafts and couplings, Applications of information technology, Fuels, Products of the chemical industry, Industrial automation systems, Shipbuilding and marine structures in general, Audio, video and audiovisual engineering, Plastics, Thermodynamics and temperature measurements, Gears, Railway engineering in general, Valves, Acoustics and acoustic measurements, Measurement of force, weight and pressure, Open systems interconnection (OSI), Radiation protection, Radiation measurements, Quality, Electrical engineering in general, Fibre optic communications.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Batch-to-batch and box-to-box variance

GB/T 7921-1997 Uniform colour space and colour difference formula
GB/T 7921-2008 Uniform color space and color difference formula
GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GB/T 19466.6-2009 Plastics.Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT)
GB/T 18311.26-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-26: Examinations and measurements Measurement of the angular misalignment between fibre and ferrule axes

Association Francaise de Normalisation, Batch-to-batch and box-to-box variance

NF ISO 5864:2004 Filetages ISO en inches - Jeux et tolérances
NF EN 15620:2021 Static steel storage system - Tolerance, deformation and clearances
NF E04-552:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF P22-752:2021 Steel static storage systems - Tolerances, deformations and clearances
NF P22-752:2008 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances.
NF F00-007:1973 Railway material in general. Recommended tolerances and fittings - General case. Fittings with clearances.
FD X08-014:2012 Colours - Colorimetry - Pseudo uniform colour spaces : CIELUV and CIELAB - Colour difference related formulae
NF EN 61518:2001 Connection dimensions between differential pressure measuring instruments and flange shut-off devices up to 413 bar (41.3 MPa)
NF J65-511:1985 Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 2 : propellers of diameter between 0,80 and 2,50 M inclusive.
NF F00-010/AM1:1975 Railway equipment in general. Tolerances and adjustments used in hinges in particular. Use of clearance adjustment or uncertainty adjustment.
NF C46-300*NF EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa).
NF EN ISO 11357-5:2014 Plastics - Differential calorimetric analysis (DSC) - Part 5: determination of the characteristic temperatures and times of the reaction curve, the reaction enthalpy and the degree of transformation
NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
FD X34-206*FD CEN/TR 14980:2006 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fraction of SRF
NF C46-409:1991 Provisional Requirements Industrial-process measurement and control Temperature and physical variables display controllers with adjustable functions and discontinuous output signals
NF T51-507-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T51-507-6*NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
FD CEN/TR 14980:2006 Solid recovered fuels - Report on the relative difference between biodegradable and biogenic fractions of solid recovered fuels
XP CEN/TS 16490:2013 Engrais - Comparaison des résultats des essais interlaboratoires menés par le CEN/TC 260/WG 7 avec les tolérances données dans le règlement (CE) no 2003/2003 Annexe II et conclusions

FI-SFS, Batch-to-batch and box-to-box variance

SFS 5126-1985 High shelves. Tolerances and free space
SFS 2901-1974 MUOKATUT KUPARIMETALLIT.TILAT JA NIIDEN TOTEAMINEN

BE-NBN, Batch-to-batch and box-to-box variance

NBN-ISO 4464:1992 Tolerances for building - Relationship between the different types of deviations and tolerances used for specification

International Organization for Standardization (ISO), Batch-to-batch and box-to-box variance

ISO 4464:1980 Tolerances for building; Relationship between the different types of deviations and tolerances used for specification
ISO 17809:2014 Space data and information transfer systems - Delta-differential one-way ranging (Delta-DOR) operations
ISO/TR 19169:2021 Geographic Information - Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
ISO 20208:2015 Space data and information transfer systems - Delta-DOR Raw Data Exchange Format
ISO 19923:2017 Space environment (natural and artificial) - Plasma environments for generation of worst case electrical potential differences for spacecraft
ISO/TR 10064-2:1996 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
ISO/IEC DIS 4396-9 Telecommunications and information exchange between systems — Future network recursive inter-network architecture — Part 9: Error and flow control protocol
ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 4759-1:1978 Tolerances for fasteners; Part I : Bolts, screws and nuts with thread diameters between 1,6 (inclusive) and 150 mm (inclusive) and product grades A, B and C

YU-JUS, Batch-to-batch and box-to-box variance

JUS M.B0.250-1987 Toleran?es of metric screvv thread with triangular ISO-profile. Limit vaiues of deviations for threads vvith and without clearance

AENOR, Batch-to-batch and box-to-box variance

UNE 17029:1978 ACROSS FLATS AND INTER EDGES. DIMENSIONS AND TOLERANCES.
UNE 40248-5:1982 METHOD FOR DETERMINATION OF THE BUNDLE STRENGHT OF WOOL FIBRES. EXPERIENCE VALUES CONCERNING OF THE COEFFICIENT OF VARIATION WTHIN ET BETWEEN LABORATORIES, CONFIDENCE INTERVAL AND MAXIMUN DIFFERENCE BETWEEN TWO LABORATORIES
UNE-EN 15620:2009 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
UNE 58911:2002 Storage and retrieval machines. Calculation principles of storage and retrieval machines. Tolerances, deformations and clearances in the high-bay warehouse.
UNE 58922:2008 Basis of calculations for S/R machines. Tolerances, deformations and clearances in automatic small parts warehouses (not silo design)
UNE-CEN/TR 14980:2009 IN Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF
UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
UNE-EN 61300-3-26:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)

GOSTR, Batch-to-batch and box-to-box variance

GOST R 50779.26-2007 Statistical methods. Point estimates, confidence intervals, prediction intervals and tolerance intervals for exponential distribution

German Institute for Standardization, Batch-to-batch and box-to-box variance

DIN EN 15620:2021-11 Steel static storage systems - Tolerances, deformations and clearances; German version EN 15620:2021
DIN 42966:1961 Ball bearings, conrad type, for electrical machines; tolerances and radial clearance
DIN EN 15620:2010 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances; German version EN 15620:2008
DIN EN 15620:2021 Steel static storage systems - Tolerances, deformations and clearances; German version EN 15620:2021
DIN 7164:2017-03 Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
DIN 6174:2007 Colorimetric evaluation of colour coordinates and colour differences according to the approximately uniform CIELAB colour space
DIN 7163:1966 Workshop Gap Gauges and Check Gauges for ISO Fit Sizes from 1 to 500 mm Nominal Dimension; Gauge Dimensions and Manufacturing Tolerances
DIN-Fachbericht CEN/TR 14980:2005 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fraction of SRF
DIN 7164:2017 Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
DIN 7167:1987 Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing
DIN 7164:1966 Workshop Plug Gauges and Spherical End Measuring Rods for ISO Fit Dimensions from 1 to 500 mm Nominal Dimensions; Gauge Dimensions and Manufacturing Tolerances
DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN 264-2:1973-05 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN 262-2:1973-05 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN EN ISO 11357-6:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018
DIN 264-2:1973 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN 19242-13:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: data transmission with error free transmission circuit
DIN EN ISO 11357-5:2024-04 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO/DIS 11357-5:2024)
DIN CEN ISO/TS 8062-2:2014 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013); German version CEN ISO/TS 8062-2:2013
DIN EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
DIN EN ISO 11357-6:2024-03 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024); German and English version prEN ISO 11357-6:2024 / Note: D...
DIN EN 61300-3-26:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26: Examinations and measurements; Measurement of the angular misalignment between fibre and ferrule axes; (IEC 61300-3-26:2002); German version EN

ES-UNE, Batch-to-batch and box-to-box variance

UNE-EN 15620:2022 Steel static storage systems - Tolerances, deformations and clearances
UNE 58016:2019 Steel static storage systems. Shuttle racking system. Principles for structural design. Tolerances, deformations and clearances
UNE-EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (Endorsed by AENOR in May of 2002.)
UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)

British Standards Institution (BSI), Batch-to-batch and box-to-box variance

BS EN 15620:2021 Steel static storage systems. Tolerances, deformations and clearances
BS EN 15620:2009 Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances
20/30393872 DC BS EN 15620. Steel static storage systems. Tolerances, deformations and clearances
BS EN 15620:2008 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
BS ISO 17809:2014 Space data and information transfer systems. Delta-differential one-way ranging (Delta-DOR) operations
PD ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
BIP 0130-2012 Collection: ISO/IEC 20000-1 and A guide to the new ISO/IEC 20000-1: The differences between the 2005 and the 2011 editions
BS PD ISO/TR 19169:2021 Geographic Information. Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues
PD ISO/TR 19169:2021 Geographic Information. Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
DD IEC/TS 61094-7:2006 Measurement microphones - Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2018 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS IEC 60605-4:2001 Equipment reliability testing - Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
BS EN 61300-3-26:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
24/30482195 DC BS EN ISO 11357-5 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
24/30482199 DC BS EN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

GSO, Batch-to-batch and box-to-box variance

GSO EN 15620:2023 Steel static storage systems - Tolerances, deformations and clearances
BH GSO EN 15620:2023 Steel static storage systems - Tolerances, deformations and clearances
GSO IEC 60605-4:2014 Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
BH GSO IEC 60605-4:2016 Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
GSO ISO 17809:2017 Space data and information transfer systems - Delta-differential one-way ranging (Delta-DOR) operations
GSO ISO 10791-9:2013 Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
OS GSO ISO 484-2:2015 Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
BH GSO ISO 484-2:2016 Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
GSO ISO 484-2:2015 Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
OS GSO ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
OS GSO ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GSO ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

AT-ON, Batch-to-batch and box-to-box variance

OENORM EN 15620-2021 Steel static storage systems - Tolerances, deformations and clearances
ONORM ISO 8015 Beib.1:1988 Technical drawings; relationship between dimensional tolerances and form and position tolerances; envelope principle without drawing indication.

Danish Standards Foundation, Batch-to-batch and box-to-box variance

DS/EN 15620:2021 Steel static storage systems – Tolerances, deformations and clearances
DS 2370-2:1996 Measuring equipment - Limit gauges - Part 2: Gap gauges and reference gauges for ISO-tolerances for 1-500 mm nominal size. Manufacturing tolerances and allowed deviations
DS/EN 15620:2008 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
DS/ISO/TR 19169:2021 Geographic Information – Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues
DS 423.35:1995 Testing of concrete - Hardened concrete - Differences of weight between top and bottom of concrete cylinders
DS/EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
DS/CEN/TR 14980:2005 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF
DS/IEC/TS 61094-7:2007 Measurement microphones - Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
DS/EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DS/EN 61300-3-26:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
DS/ISO 4759/1:1980 Tolerances for fasteners. Part I: Bolts, screws and nuts with thread diameters between 1,6 (inclusive) and 150 mm (inclusive) and product grades A, B and C

IT-UNI, Batch-to-batch and box-to-box variance

UNI EN 15620-2021 Steel static storage systems - Tolerances, deformations and clearances
UNI 6806-1972 Statistical methods for quality inspection. Comparison between two series of data and the significance of the difference between two averages
UNI 6807-1972 Statistical methods for quality inspection. Comparison between paired data of two series and the significance of the difference from zero in the difference series mean

Lithuanian Standards Office , Batch-to-batch and box-to-box variance

LST EN 15620-2021 Steel static storage systems - Tolerances, deformations and clearances
LST EN 15620-2009 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
LST EN 61518-2002 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001)

SCC, Batch-to-batch and box-to-box variance

AWWA ACE56334 Chloramination — Rules and Guidance — Variations from State to State
NS-EN 15620:2021 Steel static storage systems – Tolerances, deformations and clearances
AWWA WQTC52960 Lot-to-Lot Variation of Cryptosporidium parvum Oocyst Viability as Assessed by the Neonatal Mouse Infectivity Assay
BS BIP 0124:2011 A Guide to the new ISO/IEC 20000-1: The differences between the 2005 and the 2011 editions
DIN 7155-2:1966 ISO-fits for the shaft basis system; tolerances of fit (clearances and interferences)
CEI IEC 60605-4:2022 Equipment reliability testing Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
DANSK DS/EN 15620:2008 Steel static storage systems – Adjustable pallet racking – Tolerances, deformations and clearances
NS-EN 15620:2008 Steel static storage systems — Adjustable pallet racking — Tolerances, deformations and clearances
AENOR UNE-EN 15620:2009 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
DANSK DS/ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
BS BIP 0130:2011 Collection: ISO/IEC 20000-1 and A guide to the new ISO/IEC 20000-1: The differences between the 2005 and the 2011 editions
07/30161276 DC BS EN 15620. Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances
11/30256706 DC BS ISO 17809. Space data and information transfer systems. Delta-differential one-way ranging (Delta-DOR) operations
AWWA IMTECH59629 Bridging the Gap Between Modelers and GIS Analysts: Techniques for Successful Integration of GIS and Models
DANSK DS/ISO/TR 19169:2021 Geographic Information – Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues
ETSI TR 119 112-2019 Electronic Signatures and Infrastructures (ESI); Most significant differences between AdES/ASiC ENs and previous TSs
DIN 7164 E:2014 Draft Document - Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and to...
DANSK DS/CEN/TR 14980:2005 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF
SN-CEN/TR 14980:2004 Solid recovered fuels — Report on relative difference between biodegradable and biogenic fractions of SRF
BS DD 22:1972 Recommendations for the co-ordination of dimensions in building. Tolerances and fits for building. The calculation of work sizes and joint clearances for building components
DANSK DS/EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
DIN EN 15620 E:2020 Draft Document - Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances; German and English version prEN 15620:2020
12/30258001 DC BS ISO 11357-5. Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
DANSK DS/IEC/TS 61094-7:2007 Measurement microphones - Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
NS-EN ISO 11357-5:2014 Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
AENOR UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
AENOR UNE-CEN/TS 16490:2016 Fertilizers. Comparison of the results of the interlaboratory tests of CEN/TC 260/WG 7 with the tolerances given in Regulation (EC) No. 2003/2003 Annex II and conclusions.
DIN EN ISO 11357-5 E:2013 Draft Document - Plastics - Differential scanning calorimetry (DSC) - Part 5 : Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version FprEN ISO 11357-5:2013
NS 1885:1981 Tolerances for fasteners — Part 1: Bolts, screws and nuts with thread diameters between 1,6 (inclusive) and 150 mm (inclusive) and product grades A,B and C (ISO 4759-1:1978)
NS-EN ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
AENOR UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
DANSK DS/EN ISO 11357-6:2018 Plastics – Differential scanning calorimetry (DSC) – Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
NS-EN ISO 11357-6:2013 Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
07/30161721 DC BS ISO 11357-6. Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

American National Standards Institute （ANSI), Batch-to-batch and box-to-box variance

ANSI/NAAMM HMMA841-2013 Tolerances and Clearances for Commercial Hollow Metal Doors and Frames

RO-ASRO, Batch-to-batch and box-to-box variance

STAS 2575-1951 Tolerances and calibration. Backlash and overtightening range for single-axis systems
STAS 2574-1951 Tolerances and calibration. Clearance and overtightening range for single bore system

未注明发布机构, Batch-to-batch and box-to-box variance

DIN EN 15620 E:2020-02 Steel static storage systems - Tolerances, deformations and clearances
DIN 7164 E:2014-03 Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
DIN EN ISO 11357-5 E:2013-09 Differential Scanning Calorimetry (DSC) for Plastics Part 5: Determination of Characteristic Reaction Curves Temperature, Time, Reaction Enthalpy and Degree of Conversion (Draft)
DIN EN ISO 11357-6 E:2017-05 Differential Scanning Calorimetry (DSC) for Plastics Part 6: Determination of Oxidation Induction Time (Isothermal OIT) and Oxidation Induction Temperature (Dynamic OIT) (Draft)
DIN EN ISO 11357-6 E:2012-07 Differential Scanning Calorimetry (DSC) for Plastics Part 6: Determination of Oxidation Induction Time (Isothermal OIT) and Oxidation Induction Temperature (Dynamic OIT) (Draft)

CZ-CSN, Batch-to-batch and box-to-box variance

CSN ST SEV 181-1975 Single combination. Tolerances and fits for RVHP metric threads. average and spacing
CSN ST SEV 183-1975 Individual combined tolerances and fit RVHP metric threads for precision machine manufacturing. average and spacing

International Telecommunication Union (ITU), Batch-to-batch and box-to-box variance

ITU-T J.100 FRENCH-1990 TOLERANCES FOR TRANSMISSION TIME DIFFERENCES BETWEEN THE VISION AND SOUND COMPONENTS OF A TELEVISION SIGNAL Study Group 9
ITU-T J.100 SPANISH-1990 TOLERANCES FOR TRANSMISSION TIME DIFFERENCES BETWEEN THE VISION AND SOUND COMPONENTS OF A TELEVISION SIGNAL Study Group 9
ITU-R 717-1990 (WITHDRAWN) Tolerances for Transmission Time Differences Between the Vision and Sound Components of a Television Signal - Section CMTT E - Transmission of Signals with Multiplexing of Video, Sound and Data, and Signals of New Systems
ITU-T RESOLUTION 44-2008 Bridging the standardization gap between developing and developed countries
ITU-T J.100-1990 TOLERANCES FOR TRANSMISSION TIME DIFFERENCES BETWEEN THE VISION AND SOUND COMPONENTS OF A TELEVISION SIGNAL Study Group 9
ITU-T G.8260 AMD 2-2014 Definitions and terminology for synchronization in packet networks - Amendment to the definition of time error
ITU-T J.244-2008 Full reference and reduced reference calibration methods for video transmission systems with constant misalignment of spatial and temporal domains with constant gain and offset Study Group 9
ITU-R REPORT RS.2185-2010 Study on compatibility between “arrival time difference” (ATD) stations of the meteorological aids service and stations of the radionavigation service in the frequency band 9 to 14 kHz

Professional Standard - Aviation, Batch-to-batch and box-to-box variance

HB 2284-1976 Marking codes and tolerances for machine reamers used between holemaking operations
HB 2323-1976 Hand reamers used between holemaking operations to mark codes and tolerances
HB 2304-1976 Marking codes and tolerances for machine reamers with edge angles used between holemaking operations
HB 2295-1976 Marking codes and tolerances for machine reamers used in machining aluminum alloys between holemaking operations
HB 2309-1976 Marking codes and tolerances for machine reamers with rear-guided bevel angles between holemaking operations

Professional Standard - Post and Telecommunication, Batch-to-batch and box-to-box variance

YD/T 4612-2023 Technical requirements for time difference return transmission based on satellite and PTP synchronization

SE-SIS, Batch-to-batch and box-to-box variance

SIS SS 3528-1983 Engineers wrenches, box wrenches and sockets — Tolerances for spanner gap width

RU-GOST R, Batch-to-batch and box-to-box variance

GOST 23542-1979 Cables and wire bundles for device connections. Series of length limit deviations
GOST 10748-1979 Basic norms of interchangeability. Keyed joints with prismatic high keys. Dimensions of keys and keyways. Tolerances and fits
GOST R 55869-2013 Solid recovered fuels. Report on relative difference between biodegradable and biogenic fractions of SRF
GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GOST R 56756-2015 Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

(U.S.) Plastic Pipe Association, Batch-to-batch and box-to-box variance

PPI TN-31-2004 Differences Between PEX and PB Piping Systems for Potable Water Applications

Korean Agency for Technology and Standards (KATS), Batch-to-batch and box-to-box variance

KS B ISO 2857-2005(2010) Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches－Manufacturing tolerances on the threaded portion
KS C IEC 61518-2014(2019) Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41.3 MPa)
KS M ISO 11357-5-2015(2020) Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5-2020 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5:2015 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS C IEC 60655-2014 Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones
KS C IEC TS 61094-7-2017(2022) Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
KS M ISO 11357-6-2023 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS C IEC TS 61094-7-2022 Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones

Taiwan Provincial Standard of the People's Republic of China, Batch-to-batch and box-to-box variance

CNS 4370-1978 Round Thread with Clearance and Flat Flank with Pitch 7mm (Limits of Size and Deviation--Tolerances and Permissible Wear of Thread Gauges)
CNS 4372-1978 Round Thread with Clearance and Steep Flank with Pitch 7mm (Limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges)

European Committee for Standardization (CEN), Batch-to-batch and box-to-box variance

EN 15620:2008 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
EN 15620:2021 Steel static storage systems - Tolerances, deformations and clearances
EN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
prEN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024)

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Batch-to-batch and box-to-box variance

REPORT SM.2211-2011 Comparison of Time-Difference-of-Arrival and Angle-of-Arrival Methods of Signal Geolocation

American Society for Testing and Materials (ASTM), Batch-to-batch and box-to-box variance

ASTM C609-23 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM C609-07 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM C609-07(2014) Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM D3507-97(2000) Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood
ASTM C609-07(2019) Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM C609-20 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

ANSI - American National Standards Institute, Batch-to-batch and box-to-box variance

X3.51-1975 REPRESENTATIONS OF UNIVERSAL TIME@ LOCAL TIME DIFFERENTIALS@ AND UNITED STATES TIME ZONE REFERENCES FOR INFORMATION INTERCHANGE
X3.51-1986 INFORMATION SYSTEMS - REPRESENTATIONS OF UNIVERSAL TIME@ LOCAL TIME DIFFERENTIALS@ AND UNITED STATES TIME ZONE REFERENCES FOR INFORMATION INTERCHANGE
X3.51-1994 Information Systems - Representations of Universal Time@ Local Time Differentials@ and United States Time Zone References for Information Interchange

GB-REG, Batch-to-batch and box-to-box variance

REG NASA-LLIS-0558-1997 Lessons Learned ?Migration and Differential Draw Between Multiple Propellant Tanks (1997)

American Society of Mechanical Engineers (ASME), Batch-to-batch and box-to-box variance

ASME STP-PT-076-2015 Handling of Differences in YS, UTS, and Creep Rupture Strength between ASME and Other Standards (EN, AS, Etc.)

NZS, Batch-to-batch and box-to-box variance

SA/SNZ TR ISO 19169:2022 Geographic Information – Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues

ETSI - European Telecommunications Standards Institute, Batch-to-batch and box-to-box variance

TR 119 112-2019 Electronic Signatures and Infrastructures (ESI); Most significant differences between AdES/ASiC ENs and previous TSs (V1.1.1)

Professional Standard - Electron, Batch-to-batch and box-to-box variance

SJ/Z 9149-1987 Difference value between free-field sensitivity and pressure sensitivity levels for φ23.77mm standard condenser microphone

Institute of Electrical and Electronics Engineers (IEEE), Batch-to-batch and box-to-box variance

IEC/IEEE P62704-3/D4, 2017 IEC/IEEE Approved Draft International Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz Part 3: Specific Requirements for using the Finite Difference Time
IEEE/IEC 62704-3 IEC/IEEE Approved Draft International Standard - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz Part 3: Specific Requirements for using the Finite Difference Time
IEEE P802.1ASdm/D2.3, May 2024 IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction
IEEE Std C95.1a-2010 Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHZ to 300 GHz - Amendment 1: Specifies ceiling limits for induced and contact current, clarifies distinctions between localized exposure and spatial peak power dens
IEEE P802.1ASdm/D2.2, April 2024 IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction
IEC/IEC P62704-2/D5, 2016 IEEE/IEC Approved Draft International Standard for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 2: Specific Requirements for Finite Difference Time Domain

BELST, Batch-to-batch and box-to-box variance

STB 2452-2016 Basic rules of interchangeability. Selection rules between the tolerances of size, shape, location and roughness of surfaces

American Gear Manufacturers Association, Batch-to-batch and box-to-box variance

AGMA 01FTM8-2001 The Effect of Spacing Errors and Runout on Transverse Load Sharing and the Dynamic Factor of Spur and Helical Gears
AGMA ISO 10064-2:1999 Cylindrical Gears - Code of Inspection Practice - Part 2: Inspection Related to Radial Composite Deviations, Runout, Tooth Thickness and Backlash ISO/TR 10064-2:1996

AGMA - American Gear Manufacturers Association, Batch-to-batch and box-to-box variance

01FTM8-2001 The Effect of Spacing Errors and Runout on Transverse Load Sharing and the Dynamic Factor of Spur and Helical Gears

American Welding Society (AWS), Batch-to-batch and box-to-box variance

WRC 426:1997 Differential Design And Construction Cost Of Nuclear Power Plant Piping Systems As A Function Of Seismic Intensity And Time Period Of Construction

IN-BIS, Batch-to-batch and box-to-box variance

IS 9126 Pt.1-1979 Casting and finishing tolerances for marine propellers Part I Propellers with diameters between 0.8 and 2.5 meters

ESDU - Engineering Sciences Data Unit, Batch-to-batch and box-to-box variance

ESDU 91019 A-1993 Example of statistical techniques applied to autoland touchdown dispersion (confidence intervals for normal and skew distributions).

KR-KS, Batch-to-batch and box-to-box variance

KS M ISO 11357-6-2018(2023) Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 11357-6-2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

NO-SN, Batch-to-batch and box-to-box variance

NS 1885-1981 Tolerances for fasteners - Part 1: Bolts, screws and nuts with thread diameters between 1,6 (inclusive) and 150 mm (inclusive) and product grades A,B and C

The American Road & Transportation Builders Association, Batch-to-batch and box-to-box variance

AASHTO PP 76-2013 Standard Practice for Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures
AASHTO R 99-2021 Standard Practice for Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures

AASHTO - American Association of State Highway and Transportation Officials, Batch-to-batch and box-to-box variance

PP 76-2013 Standard Practice for Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures