ZH
RU
ES

External Quantum Efficiency and Quantum Yield

External Quantum Efficiency and Quantum Yield, Total:120 items.

In the international standard classification, External Quantum Efficiency and Quantum Yield involves: Test conditions and procedures in general, Testing of metals, Solar energy engineering, Space systems and operations, Electronic tubes, Non-ferrous metals, Optics and optical measurements, Nuclear energy engineering, Environmental testing, Metrology and measurement in general, Radiation measurements, Environmental protection, Physics. Chemistry, Medical equipment, Analytical chemistry, Optoelectronics. Laser equipment, Semiconductor devices, Protection against fire, Installations in buildings, Radiation protection, Internal combustion engines for road vehicles, Electronic components in general, Internal combustion engines, Air quality, Sterilization and disinfection, Ceramics, Mechanical structures for electronic equipment.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, External Quantum Efficiency and Quantum Yield

GB/T 26915-2011 Determination of energy conversion efficiency and quantum yield for hydrogen production in the solar photocatalytic water splitting system
GB/T 30655-2014 Test methods for internal quantum efficiency of nitride LED epitaxial layers
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 5169.47-2022 Fire hazard testing for electric and electronic products—Part 47: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical p
GB/T 4835.2-2013 Radiation protection instrumentation.Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation.Part 2:High range beta and photon dose and dose rate portable instruments for emergency radiation protection purp

国家市场监督管理总局、中国国家标准化管理委员会, External Quantum Efficiency and Quantum Yield

GB/T 38200-2019 Measurement method for quantum efficiency of solar cells
GB/T 39492-2020 Testing method of quantum efficiency for white LED phosphor
GB/T 36272-2018 Eco-efficiency assessment of electrical and electronic product system—Principles,requirements and guidelines
GB/T 37664.1-2019 Nanomanufacturing—Key control characteristics—Luminescent nanomaterials—Part 1:Quantum efficiency

RU-GOST R, External Quantum Efficiency and Quantum Yield

GOST 19438.19-1978 Low-power electronic tubes. Measurement of microphone effect by method of shock excitation
GOST 8.070-2014 State system for ensuring the uniformity of measurements. State verification schedule for means measuring absorbed doses and rate of absorbed dose, dose equivalent and rate of equivalent doses of photon and electron radiation
GOST 8.070-1996 State system for ensuring unisormity of measurements. State verification schedule for means measuring absorbed and equivalent dases and rate of absorbed and equivalent doses of photon and electron radiations
GOST 8.070-1983 State system for ensuring the uniformity measurements. State primary standard of unit of absorbed dose rate of photon ionizing radiation
GOST 19438.14-1975 Method of measurement of output power and non-linear distertiens of electronic tubes and valves under test in the conditions of low-frequeneq amplification
GOST 19438.21-1979 Low-power electronic tubes and valves for output cascades of TV line scanninp. Methods of measurement of electrice parametres and test for service time
GOST 19438.13-1975 Low-power electronic tubes and valves. Methods of measurement of conversion transconductance and electrode currents under conversion conditions
GOST IEC 61262-5-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5. Determination of the detective quantum efficiency
GOST IEC 62220-1-2011 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1. Determination of the detective quantum efficiency
GOST R IEC 62220-1-3-2013 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1-3. Determination of the detective quantum efficiency

Group Standards of the People's Republic of China, External Quantum Efficiency and Quantum Yield

T/CPIA 0033-2022 Technical Requirements for Photovoltaic Cell Quantum Efficiency Test System
T/CSTM 00197-2021 Graphene quantum dots — Determination of relative fluorescence quantum efficiency for the blue emission — Molecular fluorescence spectroscopy
T/CASAS 027-2023 Two—dimensional electron gas mobility of RF GaN HEMT epitaxial wafers—Non—contact Hall measurement method

Professional Standard - Energy, External Quantum Efficiency and Quantum Yield

NB/T 20161-2012 Installation and commissioning technical guideline for ex-core neutron flux measuring system for pressurized water reactor of nuclear power plants
NB/T 20161-2021 Technical regulations for installation and testing of external neutron fluence rate measurement system for pressurized water reactor nuclear power plants

Professional Standard - Nuclear Industry, External Quantum Efficiency and Quantum Yield

EJ/T 1011-1996 Fixed neutron dose equivalent rate meter, alarm device and monitor

British Standards Institution (BSI), External Quantum Efficiency and Quantum Yield

BS IEC 62607-3-1:2014 Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Quantum efficiency
BS EN 62607-3-1:2014 Nanomanufacturing. Key control characteristics - Luminescent nanomaterials. Quantum efficiency
BS EN 62220-1:2004 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency
BS EN 61262-5:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the detective quantum efficiency
BS ISO 17901-1:2015 Optics and photonics. Holography. Methods of measuring diffraction efficiency and associated optical characteristics of holograms
BS ISO 19438:2004 Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity
BS IEC 60747-5-10:2019 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of the internal quantum efficiency based on the room-temperature reference point
BS ISO 4548-12:2017 Methods of test for full-flow lubricating oil filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity
BS IEC 60747-5-9:2019 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of the internal quantum efficiency based on the temperature-dependent electroluminescence
BS EN 62788-1-4:2016+A1:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data
BS ISO 20351:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
BS EN 62220-1-3:2008 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-3: Determination of the detective quantum efficiency — Detectors used in dynamic imaging
PD ISO/TS 19392-5:2023 Paints and varnishes. Coating systems for wind-turbine rotor blades. Measurement of transmittance properties of UV protective coatings
BS QC 750106:1993 Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Field-effect transistors for case-rated power amplifier applications

Taiwan Provincial Standard of the People's Republic of China, External Quantum Efficiency and Quantum Yield

CNS 8830-1998 Method for determining neutron fluence rates/fluence and spectra by radioactivation techniques

Korean Agency for Technology and Standards (KATS), External Quantum Efficiency and Quantum Yield

KS A 4610-2006(2016) Portable photon ambient dose equivalent ratemeters for radiation protection
KS C IEC 62607-3-1:2018 Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
KS C IEC 61262-5-2003(2018)
KS C IEC 62220-1:2005 Medical electrical equipment－Characteristics of digital X-Ray imaging device－Part 1：Determination of the detective quantum efficiency
KS C IEC 62220-1-2005(2016) Medical electrical equipment－Characteristics of digital X-Ray imaging device－Part 1：Determination of the detective quantum efficiency
KS R ISO 19438:2005 Diesel fuel and petrol filters for internal combustion engines-Filtration efficiency using particle counting and contaminant retention capacity
KS R ISO 19438:2015 Diesel fuel and petrol filters for internal combustion engines－Filtration efficiency using particle counting and contaminant retention capacity
KS C IEC 61262-5:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 5：Determination of the detective quantum efficiency
KS C IEC 60846-2-2014(2019) Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 2: High range beta and photon dose and dose rate p

German Institute for Standardization, External Quantum Efficiency and Quantum Yield

DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
DIN EN 62220-1:2005 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency (IEC 62220-1:2003); German version EN 62220-1:2004
DIN EN 62607-3-1:2014-12 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 62607-3-1:2014); German version EN 62607-3-1:2014
DIN IEC 62607-3-1:2012 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 113/130/CD:2011)
DIN IEC 60487-2-4:1988-08 Methods of measurement for equipment used in terrestrial radio-relay systems; measurements for sub-systems; frequency modulators; identical with IEC 60487-2-4, edition 1984
DIN EN 61262-5:1995-09 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994); German version EN 61262-5:1994

Standard Association of Australia （SAA）, External Quantum Efficiency and Quantum Yield

AS/NZS 4356.5:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the detective quantum efficiency

Japanese Industrial Standards Committee (JISC), External Quantum Efficiency and Quantum Yield

JIS R 1697:2015 Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
JIS D 1623:2006 Automotive parts -- Diesel fuel and petrol filters for internal combustion engines -- Filtration efficiency using particle counting and contaminant retention capacity

Association Francaise de Normalisation, External Quantum Efficiency and Quantum Yield

NF EN ISO 11260:2018 Qualité du sol - Détermination de la capacité d'échange cationique effective et du taux de saturation en bases échangeables à l'aide d'une solution de chlorure de baryum
NF EN 61262-5:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 5 : détermination de l'efficacité quantique de détection
NF C90-907-3-1*NF EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1 : luminescent nanomaterials - Quantum efficiency
NF X70-103:2010 Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires.
NF C74-225*NF EN 61262-5:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5 : determination of the detective quantum efficiency.
NF EN 62607-3-1:2014 Nanofabrication - Caractéristiques de contrôle clé - Partie 3-1 : nanomatériaux luminescents - Rendement quantique
NF C74-220-1:2005 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1 : determination of the detective quantum efficiency.
NF EN 61788-16:2013 Supraconductivité - Partie 16 : mesures de caractéristiques électroniques - Résistance de surface des supraconducteurs aux hyperfréquences en fonction de la puissance
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
NF EN 62220-1-2:2007 Appareils électromédicaux - Caractéristiques des dispositifs d'imagerie numérique à rayonnement X - Partie 1-2 : détermination de l'efficacité quantique de détection - Détecteurs utilisés en mammographie
NF C57-788-1-4/A1*NF EN 62788-1-4/A1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4 : encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

European Committee for Electrotechnical Standardization（CENELEC）, External Quantum Efficiency and Quantum Yield

EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
EN 62327:2011 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation

KR-KS, External Quantum Efficiency and Quantum Yield

KS C IEC 62607-3-1-2018 Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC 62607-3-1-2018(2023) Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC 61788-16-2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies

International Electrotechnical Commission (IEC), External Quantum Efficiency and Quantum Yield

IEC 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
IEC 62220-1:2003 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency
IEC 60747-5-10:2019 Semiconductor devices - Part 5-10: Optoelectronic devices - Light emitting diodes - Test method of the internal quantum efficiency based on the room-temperature reference point
IEC 62327:2006 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation
IEC 60747-5-9:2019 Semiconductor devices - Part 5-9: Optoelectronic devices - Light emitting diodes - Test method of the internal quantum efficiency based on the temperature-dependent electroluminescence
IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 60846-2:2015 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 2: High range beta and photon dose and dose rate

ES-UNE, External Quantum Efficiency and Quantum Yield

UNE-EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (Endorsed by AENOR in December of 2014.)
UNE-EN 62788-1-4:2017/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

American Society for Testing and Materials (ASTM), External Quantum Efficiency and Quantum Yield

ASTM E496-14 Standard Test Method for Measuring Neutron Fluence and Average Energy from?³H40;d,n41;⁴He Neutron Generators by Radioactivation Techniques
ASTM E496-14e1 Standard Test Method for Measuring Neutron Fluence and Average Energy from?³H40;d,n41;⁴He Neutron Generators by Radioactivation Techniques
ASTM E2618-13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM E2414-05 Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces

Professional Standard - Medicine, External Quantum Efficiency and Quantum Yield

YY/T 0590.1-2005 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency
YY/T 0457.5-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 5:Determination of the detective quantum efficiency

CEN - European Committee for Standardization, External Quantum Efficiency and Quantum Yield

EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution

PT-IPQ, External Quantum Efficiency and Quantum Yield

International Organization for Standardization (ISO), External Quantum Efficiency and Quantum Yield

ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity
ISO 19438:2023 Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
ISO 4037-1:1996 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 1: Radiation characteristics production methods
ISO/CD 11554 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
ISO 17901-1:2015 Optics and photonics - Holography - Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms
ISO 20351:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere

Danish Standards Foundation, External Quantum Efficiency and Quantum Yield

DS/EN 62220-1:2004 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency
DS/EN 61262-5:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency
DS/EN 62788-1-4:2020 Measurement procedures for materials used in photovoltaic modules – Part 1-4: Encapsulants – Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

AENOR, External Quantum Efficiency and Quantum Yield

UNE-EN 62220-1:2004 Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1: Determination of the detective quantum efficiency
UNE-EN 61262-5:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 5: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY.

未注明发布机构, External Quantum Efficiency and Quantum Yield

YY 0457.5-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 5: Determination of detection quantum efficiency
ISO 19438:2003/Cor 1:2004 Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity

European Committee for Standardization (CEN), External Quantum Efficiency and Quantum Yield

EN 62220-1:2004 Medical electrical equipment Characteristics of digital X-ray imaging devices Part 1: Determination of the detective quantum efficiency IEC 62220-1:2003
EN ISO 13694:2015 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
EN ISO 4037-1:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 1: Radiation characteristics and production methods (ISO 4037-1:2019)
prEN ISO 11554 rev Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics

Lithuanian Standards Office , External Quantum Efficiency and Quantum Yield

LST EN 62220-1-2004 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1: Determination of the detective quantum efficiency (IEC 62220-1:2003)
LST EN 61262-5-2001 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994)

YU-JUS, External Quantum Efficiency and Quantum Yield

JUS N.R9.030-1977 Piezoelectric vibrators. Basic method for the measurement of resonance frequency and equivalent series esistanceof quartz crystalunits by zerophase technique ina ti - network