ZH
RU
ES
data uniformity
data uniformity, Total:477 items.
In the international standard classification, data uniformity involves: Equipment for the chemical industry, Equipment for the rubber and plastics industries, Fibre optic communications, Fertilizers, Tobacco, tobacco products and related equipment, Tyres, Special measuring equipment for use in telecommunications, Road vehicle systems, Electronic display devices, Materials for the reinforcement of composites, Burners. Boilers, Heat treatment, Textile fibres, Lubricants, industrial oils and related products, Cinematography, Metalliferous minerals, Products of the textile industry, Radiation measurements, Acoustics and acoustic measurements, Optoelectronics. Laser equipment, Semiconducting materials, Construction materials, Processes of the textile industry, Testing of metals, Kitchen equipment, Glass, Protection against fire, Analytical chemistry, Graphic technology, Photography, Paints and varnishes, Flexible drives and transmissions, Nuclear energy engineering, Cereals, pulses and derived products, Electronic tubes, Ceramics, Optics and optical measurements, Metrology and measurement in general, Pesticides and other agrochemicals, Miscellaneous domestic and commercial equipment, Road engineering, Construction of airports, Protection of and in buildings, Quality, Conducting materials, Corrosion of metals, Fasteners, Non-textile floor coverings, Packaging materials and accessories, Electrical accessories, Agricultural machines, implements and equipment, Rubber and plastics products, Internal combustion engines, Elements of buildings, Ferrous metals, Reinforced plastics, Surface treatment and coating, Aerospace electric equipment and systems, On-board equipment and instruments, Ergonomics, Plastics, Non-destructive testing, Components and accessories for telecommunications equipment, Standardization. General rules, Solar energy engineering, Medical equipment, Technical drawings, Optical equipment, Waxes, bituminous materials and other petroleum products, Paint ingredients, Wood, sawlogs and sawn timber, Electrical wires and cables, Industrial automation systems, Materials for aerospace construction, Applications of information technology, Farming and forestry, Electronic components in general, Vocabularies.
CH-SNV, data uniformity
Professional Standard - Chemical Industry, data uniformity
American National Standards Institute （ANSI), data uniformity
ZA-SANS, data uniformity
- SANS 62033:2000 Attenuation uniformity in optical fibres
- SANS 4628-2:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
- SANS 4628-3:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
- SANS 4628-4:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
- SANS 4628-5:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 5: Assessment of degree of flaking
- SANS 4628-1:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system
TR-TSE, data uniformity
- TS 628-1968 TEST METHODS FOR IRREGULARITY OF YAKN
- TS 2632-1977 STATISTICAL INTER PRETATION OF DATA COMPARISON OF TWO MEANS ?N THE CASE OF PAIRED OSERVATIONS
ECIA - Electronic Components Industry Association, data uniformity
Danish Standards Foundation, data uniformity
- DS/CEN/CR 13960:2001 Solid fertilizers - Study on homogeneity
- DS 423.43:2002 Testing of concrete - Hardened Concrete - Paste homogeneity
- DS 1114-4:1989 Corrugated sheets for roofing. Testing of resistance to uniformly distributed load (snow and wind)
- DS 423.43/Bil.1:2002 Testing of concrete - Hardened concrete - Reference atlas on paste homogeneity
- DS/EN 15466-1:2009 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity
- DS/ISO 3494:1980 Statistical interpretation of data. Power of tests relating to means and variances
- DS/ISO 2854:1980 Statistical interpretation of data. Techniques of estimation and tests relating to means and variances
- DS/EN 61262-3:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
Association Francaise de Normalisation, data uniformity
- FD U42-409*FD CR 13960:2002 Solid fertilizers - Homogeneity analysis
- FD CR 13960:2002 Engrais solides - Étude de l'homogénéité
- FD X07-035*FD ISO GUIDE 35:2018 Reference materials - Guidance for characterization and assessment of homogeneity and stability
- FD ISO GUIDE 35:2018 Matériaux de référence - Lignes directrices pour la caractérisation et l'évaluation de l'homogénéité et la stabilité
- NF G07-309*NF ISO 4913:2019 Textiles- Cotton fibres- Determination of length (span length) and uniformity index
- NF T72-321:1977 Insecticides for flying insects. Permanent insecticide distributor. Determination of the efficiency rating and the regularity rating.
- NF P98-831-8*NF EN 13036-8:2008 Road and airfield surface characteristics - Test methods - Part 8 : determination of transverse unevenness indices
- NF EN 13036-8:2008 Caractéristiques de surface des routes et aérodromes - Méthodes d'essais - Partie 8 : détermination des indices d'uni transversal
- NF E24-208:1989 V-belts. Uniformity of belts. Centre distance variation. Specifications and test method.
- NF EN 15466-1:2010 Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 1 : détermination de l'homogénéité
- NF EN ISO 105-Z11:2000 Textiles - Essais de solidité des teintures - Partie Z11 : évaluation de l'uniformité des dispersions de colorants
- NF ISO 4913:2019 Textiles - Fibres de coton - Détermination de la longueur pincée (span length) et de l'indice d'uniformité
- NF X10-023*NF EN 13187:1999 Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method.
- NF L76-001:1995 Aerospace. Visual display units. Visual performance criterias for symbology on a uniform background.
- NF EN 13036-5:2019 Caractéristiques de surface des routes et aérodromes - Méthodes d'essais - Partie 5 : détermination des indices d'uni longitudinal
- NF P98-275-1:1992 TEST RELATING TO PAVEMENTS. DETERMINATION OF THE RATE OF BINDER SPRAY. PART 1 : MEASUREMENT OF THE MEAN VALUE OF SPRAY RATE AND TRANSVERSAL HOMOGENEITY.
- NF P98-219-2:1999 Test relating to pavements. Transversal eveness tests. Part 2 : continuous dynamic measurement of the profile section by materialisation of the intersection of a plane and the pavement surface
- NF S10-201*NF ISO 17411:2014 Optics and photonics - Optical materials and components - Test method for homogeneity of optical glasses by laser interferometry
- NF EN ISO 4628-7:2016 Peintures et vernis - Évaluation de la dégradation des revêtements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 7 : évaluation du degré de farinage selon la métho...
- NF ISO 17411:2023 Optique et photonique - Matériaux et composants optiques - Méthode d'essai d'homogénéité des verres optiques par interférométrie laser
- NF EN ISO 11545:2010 Matériel agricole d'irrigation - Pivots et rampes frontales équipés de buses d'arrosage ou d'asperseurs - Détermination de l'uniformité de la distribution d'eau
- NF EN 61262-3:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 3 : détermination de la distribution de luminance et de la non-uniformité de luminance
- NF C74-223*NF EN 61262-3:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3 : determination of the luminance distribution and luminance non-uniformity.
International Electrotechnical Commission (IEC), data uniformity
- IEC TS 62033:2000 Attenuation uniformity in optical fibres
- IEC TR 62977-3-2:2016 Electronic display devices - Part 3-2: Evaluation of optical characteristics - Mura
- IEC TS 62607-6-6:2021 Nanomanufacturing - Key control characteristics - Part 6-6: Graphene - Strain uniformity: Raman spectroscopy
- IEC 61196-1-112:2006 Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance)
- IEC 61262-3:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
German Institute for Standardization, data uniformity
- DIN-Fachbericht 84:2001 Solid fertilizers - Study on homogeneity; CEN-Report 13960
- DIN 17052-1:2000 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
- DIN 17052-1:2013-09 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
- DIN 6174:2007 Colorimetric evaluation of colour coordinates and colour differences according to the approximately uniform CIELAB colour space
- DIN EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998
- DIN 50905-2:1987 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack
- DIN 17052-2:2018-08 Heat treatment furnaces - Part 2: Requirements for the uniformity of the result after heat treatment
- DIN EN 15466-1:2009-10 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity; German version EN 15466-1:2009
- DIN EN ISO 16424:2018-01 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd<(Index)2>O<(Index)3> content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012);...
- DIN EN 15466-1:2023-07 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity; German and English version prEN 15466-1:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN 15466-1 (2009-10).
- DIN 53829-1:1990 Testing of textiles; determination of the evenness of yarns; testing of the force and extension on a moving test pieces, principles
- DIN EN ISO 15927-1:2004 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO 15927-1:2003); German version EN ISO 15927-1:2003
- DIN EN 61262-3:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994
- DIN 50905-3:1987 Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress
- DIN EN 3973:2007 Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - D<(Index)e> 50 mm - R<(Index)m> 1030 MPa; German and English version EN 3973:2006
- DIN ISO 7991:1998 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
British Standards Institution (BSI), data uniformity
- PD IEC TS 62033:2000 Attenuation uniformity in optical fibres
- BS ISO 26431-1:2009 Digital cinema (D-cinema) quality. Screen luminance level, chromaticity and uniformity
- BS ISO 26431-1:2008 Digital cinema (D-cinema) quality - Screen luminance level, chromaticity and uniformity
- PD ISO GUIDE 35:2017 Reference materials. Guidance for characterization and assessment of homogeneity and stability
- 23/30473103 DC BS ISO 33405. Reference materials. Guidance for characterization and assessment of homogeneity and stability
- BS AU 50-1.0.1:1999 Tyres and wheels. Tyres. General. Method of test for measuring tyre uniformity
- BS 3712-1:1991 Building and construction sealants - Methods of test for homogeneity, relative density and penetration
- BS EN ISO 10582:2012 Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor coverings. Specification
- BS ISO 9608:2022 V-belts and V-ribbed belts. Uniformity of belts. Test method for determination of centre distance variation
- BS 7459-2:1991 Rotating sprinklers for irrigation equipment - Methods of test for uniformity of distribution
- 23/30467359 DC BS EN 15466-1. Primers for cold and hot applied joint sealants - Part 1. Determination of homogeneity
- BS ISO 19740:2018 Optics and photonics. Optical materials and components. Test method for homogeneity of infrared optical materials
- 21/30444561 DC BS ISO 9608. V-belts and V-ribbed belts. Uniformity of belts. Test method for determination of centre distance variation
- BS 2846-2:1981 Guide to statistical interpretation of data. Estimation of the mean: confidence interval
- BS ISO 8000-140:2016 Data quality - Master data. Exchange of characteristic data. Completeness
- BS ISO 8000-130:2016 Data quality - Master data. Exchange of characteristic data. Accuracy
- BS EN ISO 15927-1:2003 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Monthly means of single meteorological elements
- BS ISO 17411:2014 Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry
- BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
AENOR, data uniformity
- UNE-CR 13960:2001 Solid fertilizers - Study on homogeneity.
- UNE 40460:1995 TEXTILES. COTTON FIBRES. DETERMINATION OF LENGTH (SPAN LENGTH) AND UNIFORMITY INDEX.
- UNE-EN 15466-1:2010 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity
- UNE 20512-8:1978 GUIDE FOR THE STATISTICAL ANALYSIS OF AGEING DATA. METHODS BASED ON MEAN VALUES OF NORMALLY DISTRIBUTED TEST DATA
- UNE 40225-1:1974 IN WOOL. DETERMINATION OF SHORT TERM IRREGULARITY OF LINEAR DENSITY OF SILVERS, ROVING AND YARNS, BY MEANS OF AN ELECTRONIC EVENESS TESTER.
- UNE 400308:1997 GLASS. DETERMINATION OF COEFFICIENT OF MEAN LINEAR THERMAL EXPANSION.
- UNE 66060:1982 STATISTICAL INTERPRETATION OF DATA. EFFICIENCY OF TEST RELATING TO MEANS AND VARIANCES
- UNE-EN 61262-3:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 3: DETERMINATION OF THE LUMINANCE DISTRIBUTION AND LUMINANCE NON-UNIFORMITY.
Professional Standard - Tobacco, data uniformity
- YC/T 353-2010 Cigarettes-Determination of casing uniformity
- YC/T 366-2010 Threshed tobacco.Evaluation of strips quality homogeneity
Japanese Industrial Standards Committee (JISC), data uniformity
- JIS D 4233:2001 Test procedures for automobile tire uniformity
- JIS Q 0035:2022 Reference materials -- Guidance for characterization and assessment of homogeneity and stability
- JIS R 1666:2005 Testing method for macro-heterogeneity in microstructure of fine ceramics
- JIS B 7206:1972 35 mm motion picture scanning-beam illumination uniformity test films, laboratory type
- JIS B 0090-4:2001 Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae
Society of Motion Picture and Television Engineers (SMPTE), data uniformity
- SMPTE 431-1-2006 D-Cinema Quality - Screen Luminance Level, Chromaticity and Uniformity
- SMPTE ST 431-1-2006 D-Cinema Quality - Screen Luminance Level, Chromaticity and Uniformity
- SMPTE RP 81-2004 Specifications for Scanning-Beam Uniformity Test Film for 16-mm Motion-Picture Photographic Audio Reproducers
- SMPTE RP 69-2002 Specifications for Scanning-Beam Uniformity Test Film for 35-mm Motion-Picture Audio Reproducers
- SMPTE RP 81-1994 Specifications for Scanning-Beam Uniformity Test Film for 16-mm Motion-Picture Photographic Audio Reproducers
RO-ASRO, data uniformity
- STAS 12677-1988 OPTICAL GLASS Optical homogeneity checking up
- STAS 9139/11-1980 MAN-MADE YARNS Determination of evenness of dye of polyamidic yarns
- STAS 7122/8-1988 STAT ISTICAL INTERPRETATION OF DATA Tests relating to means and variances
- STAS 7122/2-1986 STAT IST ICAL INTERPRETAT ION OF DATA Estimation of the mean and of the difference of two means
- STAS 7122/9-1988 Statistical interpretation of data. Power of tests relating to means and variances
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, data uniformity
- GB/T 18506-2001 Uniformity test method for motor vehicle tyres
- GB/T 6996.10-1986 Quality of distribution test chart of transparencies for television
- GB/T 18506-2013 Uniformity test method for motor vehicle tyres
- GB/T 12792-1991 Methods of measurement of impedance uniformity for radio-frequency cables
- GB/T 25944-2010 Aluminium ores.Experimental determination of the heterogeneity of distribution of a lot
- GB/T 25950-2010 Aluminium ores.Experimental determination of the heterogeneity of constitution
- GB/T 30824-2014 Testing method for temperature uniformity of gas heat treatment furnace
- GB/T 42222-2022 Laboratory glassware—Testing method and classification of optical uniformity
- GB/T 32561.1-2016 Measuring method for chalcogenide infrared optical glass.Part 1:Homogeneity
- GB/T 13490-1992 V-belts--Uniformity of belts--Centre distance variation--Specification and test method
- GB/T 13490-2006 V-belts. Uniformity of belts. Test method for determination of centre distance variation
- GB/T 7962.2-1987 Colourless optical glass test methods--Test method by collimator for optical homogeneity
- GB/T 7962.3-1987 Colourless optical glass test methods--Test method by holographic interference for optical homogeneity
- GB/T 7962.3-2010 Test methods of colourless optical glass.Part 3:Optical homogeity.Holographic interferometry
- GB/T 15000.3-2023 Standard sample working guidelines part 3: Standard sample determination and homogeneity and stability evaluation
- GB/T 7962.4-1987 Colourless optical glass test methods--Test method by multiple beam spherical interference for optical homogeneity
- GB/T 7962.2-2010 Test methods of colourless optical glass.Part 2:Optical homogeneity.Fizeau plano-interferometry
- GB/T 19795.2-2005 Agricultural irrigation equipment-Rotating sprinklers-Part 2:Uniformity of distribution and test methods
- GB/T 5441.4-1985 Test methods for communication cable--Impedance and impedance irregularities test of coaxial pair--Pulse method
- GB/T 41640-2022 Critical current measurement—Measurement of critical current and its uniformity along the length of 2G-HTS long tapes
- GB/T 3360-1982 Statistical interpretation of data--Estimation of the mean--Confidence interval
- GB/T 42381.140-2023 Data Quality Part 140: Master Data: Characteristic Data Exchange: Integrity
- GB/T 42381.130-2023 Data Quality Part 130: Master Data: Characteristic Data Exchange: Accuracy
- GB/T 42381.120-2023 Data Quality Part 120: Master Data: Characteristic Data Exchange: Traceability
Taiwan Provincial Standard of the People's Republic of China, data uniformity
JSAE - Society of Automotive Engineers of Japan@ Inc., data uniformity
RU-GOST R, data uniformity
- GOST 25024.4-1985 Character displays. Methods measuring brightness, luminous intensity, irregularity of brightness and irregularity of luminous intensity
- GOST 6943.14-1994 Textile glass. Yarns. Method for determination of twist balance index
- GOST 21316.4-1975 Photocells. Method of measurement of sensitivity nenuniformity
- GOST R ISO 13326-2003 Pneumatic tyres. Test methods for measuring uniformity
- GOST 21815.16-1986 Image intensifier and image converter tubes. Method of measuring the output brightness non- uniformity ratio
- GOST R 8.942-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data.Laser Crystals (Potassium rare-earth tungstates). Elasticity constants. Elasto-optic modules for isotropic diffraction
- GOST 18720.10-1976 Television camera tubes. Methods of measurement for black and white background nonuniformity
- GOST R 8.936-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Pyezokeramik on the LiaKbNacNbdTamSbnO3+z[Bi2O3-Fe2O3]. Dielectric and piezoelectric properties at a temperature of 25 °C
- GOST R 8.934-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Titanates of strontium and barium. Lattice parameters in the concentration range from 0 at. % to 50 % at. Ba
- GOST R 8.568-2017 State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
- GOST 21059.1-1975 Picture tubes for TV. Methods for measurement of screen brightness and uniformity of screen brilliancy
- GOST 11612.3-1975 Photomultipliers. Measuring method of non-uniformity of light anode sensitivity over the photocatode area
- GOST 18720.9-1976 Television camera tubes. Methods of measurement for dark current and dark current nonuniformity
- GOST 11583-1974 Polimer materials, building and finishing. Methods for the determination of light resistance and uniformity of painting and lightness
- GOST R 8.940-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Copper-zinc alloys. Temperature coefficient of linear expansion and electrical resistivity temperature range from 300 to 2/3 temperature of melting
- GOST R 56741-2015 Composites. Method of measuring the uniformity of absorbing electrochromic coating on a glazing surface
- GOST 16755-1971 Cathode-ray receiver devices. Method for measurement of irregularity fluorescent screen brightness
- GOST 19109-1984 Plastics. Method for determination of Izod impact strength
- GOST 22091.7-1984 X-ray devices. The methods of the measuring of the uniformity of the distribution of the energe flyx density of the X-ray over the X-ray coverage
- GOST ISO 7749-2-2004 Agricultural irrigation equipment. Rotating sprinklers. Part 2. Uniformity of distribution and test methods
- GOST R 8.943-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Telluritny glasses of system TeO2 + R2O and their fusions. Thermal conductivity in the temperatures range from 300 to 800 K and concentration of oxides o
- GOST IEC 61262-3-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity
- GOST R 54526-2011 Data quality. Part 140. Master data. Exchange of characteristic data. Completeness
- GOST R 54526-2011(2019) Data quality. Part 140. Master data. Exchange of characteristic data. Completeness
- GOST 21059.5-1976 Kinescopes for black-white and colour television. Measurement methods of chromacity and non-uniformity of screen glow chromacity
- GOST R 50779.25-2005 Statistical methods. Statistical interpretation of data. Power of tests relating to means and variances
- GOST R 54911-2012 Data qulity. Part 120. Master data. Exchange of characteristic data. Provenance
- GOST R IEC 61262-3-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity
HU-MSZT, data uniformity
Korean Agency for Technology and Standards (KATS), data uniformity
International Organization for Standardization (ISO), data uniformity
- ISO 13326:1998 Test methods for measuring tyre uniformity
- ISO 16549:2004 Textiles - Unevenness of textile strands - Capacitance method
- ISO 6138:1991 Aluminium ores; experimental determination of the heterogeneity of constitution
- ISO/DIS 33405:2023 Reference materials — Guidance for characterization and assessment of homogeneity and stability
- ISO 9608:1994 V-belts - Uniformity of belts - Test method for determination of centre distance variation
- ISO 16549:2021 Textiles — Unevenness of textile strands — Capacitance method
- ISO 11638:2012 Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification
- ISO 7749-2:1990 Irrigation equipment; rotating sprinklers; part 2: uniformity of distribution and test methods
- ISO 26431-1:2008 Digital cinema (D-cinema) quality - Part 1: Screen luminance level, chromaticity and uniformity
- ISO 9608:1988 V-belts; uniformity of belts; centre distance variation; specifications and test method
- ISO 9608:2022 V-belts and V-ribbed belts — Uniformity of belts — Test method for determination of centre distance variation
- ISO 11597:1995 Verification of samples of uranyl or plutonium nitrate solutions by density measurements
- ISO/TS 23973:2020 Liquid chromatography at critical conditions (LCCC) — Chemical heterogeneity of polyethylene oxides
- ISO 19740:2018 Optics and photonics - Optical materials and components - Test method for homogeneity of infrared optical materials
- ISO 3494:1976 Statistical interpretation of data; Power of tests relating to means and variances
- ISO/TR 834-2:2009 Fire-resistance tests - Elements of building construction - Part 2: Guidance on measuring uniformity of furnace exposure on test samples
- ISO 2854:1976 Statistical interpretation of data; Techniques of estimation and tests relating to means and variances
- ISO/TS 8000-120:2009 Data quality - Part 120: Master data: Exchange of characteristic data: Provenance
- ISO 17411:2014 Optics and photonics - Optical materials and components - Test method for homogeneity of optical glasses by laser interferometry
- ISO 17411:2022 Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry
- ISO 8000-140:2016 Data quality - Part 140: Master data: Exchange of characteristic data: Completeness
- ISO/TS 8000-140:2009 Data quality - Part 140: Master data: Exchange of characteristic data: Completeness
- ISO 4628-5:2022 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
- ISO/DIS 4628-3:2023 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
- ISO/CD 4628-3:1980 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
TIA - Telecommunications Industry Association, data uniformity
- TSB62-5-1995 ITM-5 Characterization of Attenuation Uniformity of Optical Fiber
Professional Standard - Machinery, data uniformity
- JB/T 9495.7-1999 Measuring method for optical homogeneity of optical crystals
- JB/T 8261-2015 Test chart (A3) for screen and density inhomogeneity of electrostatic copy
- JB/T 8261-1999 The screening and non-uniformity of image density test chart for electrostatic copying process A3
- JB/T 8248.3-1999 Method for measuring the coefficient of vignetting and uniformity of image plane illuminance
National Metrological Technical Specifications of the People's Republic of China, data uniformity
- JJF 1839-2020 Calibration Specification for Tyre Uniformity Testing Machines
- JJF 1343-2022 Characterization,Homogeneity and Stability Assessment of Reference Materials
Shanxi Provincial Standard of the People's Republic of China, data uniformity
- DB14/T 2532-2022 Test method for furnace temperature uniformity of annular furnace
KR-KS, data uniformity
- KS K ISO 4913-2021 Textiles — Cotton fibres —Determination of length(span length) and uniformity index
- KS K ISO 4913-2014 Textiles — Cotton fibres — Determination of length(span length) and uniformity index
- KS K ISO 16549-2021 Textiles — Unevenness of textile strands — Capacitance method
- KS A ISO GUIDE 35-2018 Reference materials — Guidance for characterization and assessment of homogeneity and stability
- KS A ISO GUIDE 35-2018(2023) Reference materials — Guidance for characterization and assessment of homogeneity and stability
Professional Standard - Petrochemical Industry, data uniformity
- SH/T 0801-2007 Standard test method for determination of homogeneity and miscibility in automotive engine oils
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., data uniformity
- ASHRAE TO-98-9-1-1998 Effect of Airflow Nonuniformity on Evaporation Performance
- ASHRAE SE-99-7-2-1999 Influence of Heat and Contaminant Source Nonuniformity on the Performance of Three Different Room Air Distribution Methods
- ASHRAE 4445-2001 Spatial Homogeneity of Air in a Mushroom Tunnel: Single VS. Boost Duct Air Distribution Systems
Group Standards of the People's Republic of China, data uniformity
- T/CIESC 0013-2021 Standard for heating uniformity of industrial microwave equipment
- T/QGCML 1432-2023 Technical specification for forming high uniformity coated fabrics
- T/CAB 0133-2022 Household electromagnetic cooking appliance-Methods for measuring the heating uniformity grade
- T/CAS 473-2021 Baking uniformity requirements for household and similar electric ovens
- T/CTES 1030-2020 Measurement of diameter and their distribution of glass fibers of electronic filaments
- T/GDC 193-2022 Evaluation and classification of heating temperature uniformity of household gas stoves and integrated stoves
- T/CES 067-2021 Magnetic circuit test method for magnetization critical current uniformity of high temperature superconducting tapes
- T/CMA HG026-2021 Tires for calibration of car tire uniformity testing machine and dynamic balancing testing machine
- T/CMA 026-2021 Tires for calibration of car tire uniformity testing machine and dynamic balancing testing machine
- T/CIRA 42-2022
- T/CICEIA /CAMS4-2020 Diesel engine - Test method of ammonia uniformity for SCR converter
- T/CAS 567-2022 Technical specification for evaluating the baking uniformity of household oven based on image segmentation algorithm
- T/CES 046-2020 Specification of magnetic circuit test system for magnetization critical current uniformity of high temperature superconducting tapes
- T/CMA HG027-2021 Tires for truck tire uniformity testing machine and dynamic balancing testing machine calibration
- T/CMA 027-2021 Tires for truck tire uniformity testing machine and dynamic balancing testing machine calibration
US-FCR, data uniformity
American Society for Testing and Materials (ASTM), data uniformity
- ASTM D4158-08(2020) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM F1618-96 Standard Practice for Determination of Uniformity of Thin Films on Silicon Wafers
- ASTM E2749-15a(2019) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM D3928-00a Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM D3928-89 Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM D3928-00a(2010) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM D3928-00a(2018) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM D3928-00a(2005) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM D3928-00a(2014) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM C1164-92(2003) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
- ASTM C1164-92(1997)e1 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
- ASTM E2749-10(2014) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM E2749-15 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM E2749-15a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM D4158-08 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM D4158-08(2012) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM E2749-23 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM C917-05 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
- ASTM E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM E2810-11(2017) Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
- ASTM C917-05(2011) Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
- ASTM E2810-19 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
- ASTM D6922-03 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
- ASTM D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
- ASTM D4158-92 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM D4158-01 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM F812/F812M-97 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
- ASTM F812/F812M-02 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
- ASTM F812/F812M-07 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
- ASTM C917-98 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
- ASTM A991/A991M-22 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM D5414-95(2020) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM D4158-08(2016) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM D1425/D1425M-14 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
- ASTM C1164-22 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
- ASTM E2355-04 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
- ASTM A991/A991M-10 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM A991/A991M-17 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM E1089-86(2001) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
- ASTM E1089-86(1995) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
- ASTM E108-10 Standard Test Methods for Fire Tests of Roof Coverings
- ASTM D1447-89(1994)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
- ASTM E998-19 Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads
- ASTM C1164-14 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
- ASTM E108-16 Standard Test Methods for Fire Tests of Roof Coverings
- ASTM E1089-86(2007) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
- ASTM A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM A991/A991M-08 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM C1164-92(2009) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
- ASTM A991/A991M-98(2004) Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM D1447-07(2021) Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
- ASTM F788/F788M-05 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM F788/F788M-02 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM F788/F788M-97 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM D2743-68(2010) Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
- ASTM D2743-68(2004) Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
- ASTM F788/F788M-08 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM E3264-21 Standard Guide for Homogeneity of Samples and Reference Materials Used for Inter- and Intra-Laboratory Studies
- ASTM D2743-68(1998) Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
- ASTM E331-70(1975) Standard Test Method for Water Penetration Of Exterior Windows, Curtain Walls, And Doors By Uniform Static Air Pressure Difference
- ASTM A991/A991M-10(2015) Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM E330-90 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
- ASTM E330-79 Standard Test Method for Structural Performance Of Exterior Windows, Curtain Walls, And Doors By Uniform Static Air Pressure Difference
- ASTM F2964-12 Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
- ASTM D1425-96 Standard Test Method for Unevenness of Textile Strands Using Capacitance Testing Equipment (Withdrawn 2005)
- ASTM E998-84(1999) Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
- ASTM E330/E330M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E331-00(2023) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E998-12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
- ASTM C1201-91(1996) Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
- ASTM C1201/C1201M-09 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
- ASTM C1201/C1201M-20 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
- ASTM F2964-12(2020) Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
- ASTM F1529-02 Standard Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure
- ASTM C1201/C1201M-15 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
- ASTM E997-12 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
- ASTM E998-05 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
- ASTM E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
- ASTM E1646-95(2003) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
- ASTM E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
- ASTM E1646-95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
- ASTM A191-38 Test Method for Uniformity of CoatIng by the Preece Test (Copper Sulfate Dip) on Zinc-Coated (Galvanized) Iron or Steel Articles
YU-JUS, data uniformity
- JUS N.C6.010-1982 Radio-frequency cables. Measuring methods of uniformity oflocal characteristic impedance
- JUS N.C6.009-1982 Radio-frequency cables. Maasuring methods of unifomtity of effective characteristic impedance
CZ-CSN, data uniformity
- CSN 35 8586 Cast.2-1986 Camera Tubes. Measurement of white and black background nonuniformity
- CSN 35 8586 Cast.1-1986 Camera Tubes. Measurement of output signal nonuniformity
- CSN 35 8586 Cast.4-1987 Camera Tubes. Measurement of dark current and determination and its inhomogeneity
- CSN 03 8555-1966 Hot-dip galvanizing. Non-destructive methods of determination of thickness, compositiqn and uniformity oi coatings
- CSN 64 0143-1961 Solid non-ferrous material tests. Mean coefficient of thermal linear expansion
- CSN ISO 7991:1992 Glass. Determination of the coefficient of mean linear thermal expansion
- CSN 72 5127-1987 Ceramic tiles. Determination of the mean coefficient of lenear thermal expansion
- CSN 42 0440-1985 Determination of the mean linear thermal expansion coefficient of metals
IN-BIS, data uniformity
Standard Association of Australia （SAA）, data uniformity
- AS 3974:1991 Evaluation of uniformity of cement strength from a single source
- AS 2806.4:2004 Aluminium ores - Sampling - Determination of heterogeneity of constitution
- AS 2806.4:1994 Aluminium ores - Sampling Part 4: Determination of the heterogeneity of constitution
- AS/NZS 4356.3:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the luminance distribution and luminance non-uniformity
- AS 2529:1982 Collection of reliability, availability and maintainability data for electronics and similar engineering use
American Society of Mechanical Engineers (ASME), data uniformity
Military Standard of the People's Republic of China-General Armament Department, data uniformity
- GJB 1912-1994 Test method for uniformity of magnetic field on surface of permanent magnet
- GJB 1912A-2021 Test method for uniformity of magnetic field on surface of permanent magnet
- GJB 9247-2017 Optical glass optical non-uniformity detection method Plane interference multi-surface method
- GJB 5183-2003 Evaluation method for bullet scattering radius, scattering blind zone radius and scattering uniformity of submunition projectiles
- GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
国家市场监督管理总局、中国国家标准化管理委员会, data uniformity
- GB/T 36617-2018 Digital cinema (D-cinema) quality—Screen luminance level,chromaticity and uniformity
- GB/T 40150-2021 Grain and oil storage—Evaluation of uniformity of grain mechanical ventilation
- GB/T 9978.2-2019 Fire Resistance Tests—Elements of building construction—Part 2: Guidance on measuring uniformity of furnace exposure on test samples
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, data uniformity
- GB/T 33779.1-2017 Guidance for special characteristics of optical fibre—Part 1: Attenuation uniformity
- GB/T 32991-2016 Test method for density uniformity of mineral wool for thermal insulation
- GB/T 33876-2017 Method for measuring gloss uniformity of image on colour copied pages
- GB/T 17737.115-2018 Coaxial communication cables—Part 1-115: Electrical test methods—Test for regularity of impedance (pulse/step function return loss)
IT-UNI, data uniformity
Professional Standard - Agriculture, data uniformity
- 119药典 四部-2020 0900 Characteristic Inspection Method 0941 Content Uniformity Inspection Method
- 138药典 四部-2015 0900 Characteristic Inspection Method 0941 Content Uniformity Inspection Method
- 842兽药典 一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0941 Content Uniformity Inspection Method
- GB 3360-1982 Statistical treatment of data and interpretation Estimation and confidence intervals of means
Professional Standard - Building Materials, data uniformity
- JC/T 338-1983 Test Method for Uniformity of Glass Balls—Oil Immersion Projection Method
- JC/T 679-1997 Glass.The method for measuring coefficient of mean linear thermal expansion
ESDU - Engineering Sciences Data Unit, data uniformity
- ESDU 03012 B-2010 Computer program for calculation of mean value properties for non-uniform compressible flows
- ESDU 03012 A-2007 Computer program for calculation of mean value properties for non-uniform compressible flows.
- ESDU 03012-2004 Computer program for calculation of mean value properties for non-uniform compressible flows
- STRUCT 04.09.01 A-1976 Collapse coefficients for unstiffened circular cylinders under uniform external pressure.
- ESDU 66010-1966 Elastic stresses in a long circular cylindrical shell with a flat head closure under uniform pressure.
- ESDU 70001 B-1995 Elastic stresses and deflections for flat square plates under uniformly distributed normal pressure.
- ESDU 67017-1967 Elastic stresses in the torispherical head of a pressure vessel of uniform thickness.
- STRUCT 02.01.47 A-1984 Buckling stress coefficients for parallelogram shaped panels in continuous flat sheet under uniform compression.
- ESDU 71013 C-1995 Elastic direct stresses and deflections for flat rectangular plates under uniformly distributed normal pressure.
- STRUCT 02.01.46-1957 Buckling stress coefficients for flat parallelogram plates under uniform compression. (All edges fixed against rotation.)
- ESDU 69018 B-1995 Elastic stresses and deflections for long flat rectangular plates under uniformly distributed and linearly varying normal pressure.
- ESDU 65002-1965 Elastic stresses and deflections for flat circular plates with D/t greater than or equal to 4 under uniform pressure.
- ESDU 65003-1965 Elastic stresses and deflections for flat circular plates with D/t greater than or equal to 20 under uniform pressure.
- ESDU 87036 B-1996 Elastic stresses and deflections for square plates with small initial curvature under uniform pressure on the concave or convex face.
- ESDU 69019-1969 Elastic stresses and deflections for long rectangular plates with small initial curvature under uniformly distributed normal pressure on the concave face.
- ESDU 76014 B-1993 Estimation of endurance and construction of constant amplitude SN curves from related data corrected for notch and mean stress effects.
- ESDU 76014 B-2013 Estimation of endurance and construction of constant amplitude S – N curves from related data corrected for notch and mean stress effects
- ESDU 93011-1994 Flat rectangular orthotropic plates under uniformly distributed normal pressure. Elastic stresses and deflections for various forms of edge restraint.
NEMA - National Electrical Manufacturers Association, data uniformity
- NEMA MS 3-1989 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
- NEMA XR 17-1993 Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier System
工业和信息化部, data uniformity
- YB/T 4772-2019 Determination and calculation method of billet heating temperature uniformity
- YB/T 4143-2019 Inspection method for uniformity determination of solid metals using spark source atomic emission spectrometry
BR-ABNT, data uniformity
- ABNT ISO GUIA 35:2020 Reference materials - Guidance for characterization and assessment of homogeneity and stability
PH-BPS, data uniformity
- PNS ISO Guide 35:2021 Reference materials - Guidance for characterization and assessment of homogeneity and stability
Professional Standard - Electron, data uniformity
- SJ 20844-2002 Test method for microzone homogeneity of semi-insulating monocrystal gallium arsenide
ANSI - American National Standards Institute, data uniformity
National Electrical Manufacturers Association（NEMA), data uniformity
- NEMA MS 3-2008 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
- NEMA MS 6-2008 Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel Non-Volume Coils in Diagnostic MR Imaging
Canadian General Standards Board （CGSB), data uniformity
PL-PKN, data uniformity
- PN T04840-09-1986 Camera tubes Methods of measuring of dark current and determining of its non-uniformity
GM North America, data uniformity
- GM GMJ130-1988 Metric Uniform Cross Section Rectangular Retaining Rings General Specifications
- GM GMJ131-1988 Metric Uniform Cross Section Spiral Retaining Rings General Specifications
Professional Standard - Nuclear Industry, data uniformity
- EJ/T 781-1993 Research on detection method of uranium homogeneity in stacked fuel elements
- EJ/T 20227.1-2018 Applied performance test of boron-containing aluminum-based neutron absorbing materials Part 1: Uniform corrosion test method
Indonesia Standards, data uniformity
- SNI ISO 4913:2010 Textiles - Cotton fibres - Determination of length (span length) and uniformity index
- SNI ISO 4471:2011 Wood - Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands
National Aeronautics and Space Administration (NASA), data uniformity
Professional Standard - Ferrous Metallurgy, data uniformity
- YB/T 4143-2006 Rules for checking the homogeneity of materials used in the preparation of reference samples
American Society of Civil Engineers (ASCE), data uniformity
- ASCE 54-10-2010 Standard Guideline for the Geostatistical Estimation and Block-Averaging of Homogeneous and Isotropic Saturated Hydraulic Conductivity
Institute of Electrical and Electronics Engineers (IEEE), data uniformity
- IEEE/ANSI N42.27-1999 American National Standard for Determination of Uniformity of Solid Gamma-Emitting Flood Sources
- ST 431-1:2006 ST 431-1:2006 - SMPTE Standard - D-Cinema Quality — Screen Luminance Level, Chromaticity and Uniformity
- SMPTE ST 431-1:2006 ST 431-1:2006 - SMPTE Standard - D-Cinema Quality — Screen Luminance Level, Chromaticity and Uniformity
- SMPTE RP 69:2002 RP 69:2002 - SMPTE Recommended Practice - Specifications for Scanning-Beam Uniformity Test Film for 35-mm Motion-Picture Audio Reproducers
- RP 69:2002 RP 69:2002 - SMPTE Recommended Practice - Specifications for Scanning-Beam Uniformity Test Film for 35-mm Motion-Picture Audio Reproducers
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., data uniformity
- IEEE N42.27-1999 American National Standard for Determination of Uniformity of Solid Gamma-Emitting Flood Sources
European Committee for Standardization (CEN), data uniformity
- CEN EN 13036-8-2008 Road and airfield
surface
characteristics —
Test methods —
Part 8: Determination of transverse
unevenness indices
- prEN 26781-1992 Thermal insulation; qualitative detection of thermal irregularities in building envelopes; infrared method (ISO 6781:1983)
- EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
- EN 3475-506:2002 Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 506: Plating Continuity
- EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified)
- EN ISO 11545:2009 Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2009)
- EN 4632-004:2012 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
Professional Standard - Textile, data uniformity
- FZ/T 01081-2000 Determination of coating weight and uniform for fusible interlinings
- FZ/T 01081-2009 Testing method for coating weight and uniform for fusible interlinings
International Federation of Trucks and Engines, data uniformity
BELST, data uniformity
- STB GOST R 8.585-2004 State system for ensuring the uniformity of measurements.Thermocouples. Nominal static characteristics of conversion
- STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs
Lithuanian Standards Office , data uniformity
- LST EN 15466-1-2009 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity
Professional Standard - Press and Publication, data uniformity
- CY/T 104.4-2014 Graphic technology-Test methods for printability of paper and board Part 4: Printing uniformity
未注明发布机构, data uniformity
- BS 3712-1:1991(2011) Building and construction sealants — Part 1 : Methods of test for homogeneity, relative density and penetration
- YY 0457.3-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 3: Determination of brightness distribution and non-uniformity
- DIN EN 583-5:2001 Non-destructive testing – Ultrasonic testing – Part 5: Description and sizing of inhomogeneities; German version EN 583-5:2000
- DIN EN 583-4:2002 Non-destructive testing – Ultrasonic testing – Part 4: Testing for inhomogeneity perpendicular to the surface; German version EN 583-4:2002
BE-NBN, data uniformity
- NBN-ISO 9608:1989 V-belts - Uniformity of belts - Centre distance variation - Spécifications and test method
Yunnan Provincial Standard of the People's Republic of China, data uniformity
- DB53/T 512-2013 Determination of Blending Uniformity of Secondary Re-cut Microwave Expanded Shredded Stems by Near Infrared Spectroscopy
American Welding Society (AWS), data uniformity
- WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)
SE-SIS, data uniformity
- SIS SS 01 42 10-1979 Statistical Interpretation of data — Estimation of the mean — Conf idence interval
European Committee for Electrotechnical Standardization（CENELEC）, data uniformity
- HD 241 S2-1981 Identification of Apparatus Terminals and General Rules for a Uniform System of Terminal Marking, Using an Alpha-Numeric Notation
- EN 61262-3:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 3: Determination of the Luminance Distribution and Luminance Non-Uniformity
Tianjin Provincial Standard of the People's Republic of China, data uniformity
- DB12/T 1051-2024 Technical regulations for uniform processing of surface wind speed observation data
- DB12/T 1051-2021 Technical regulations for uniform processing of surface wind speed observation data
工业和信息化部/国家能源局, data uniformity
- JB/T 13028-2017 Standard method for measuring surface potential uniformity of photoconductor drums used in electrophotographic (printing, multi-function) equipment
Professional Standard - Medicine, data uniformity
- YY/T 0457.3-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 3:Determination of the luminance distribution and luminance non-uniformity
Audio Engineering Society, data uniformity
- AES 4ID-2001 Information Document for Room Acoustics and Sound Reinforcement Systems - Characterization and Measurement of Surface Scattering Uniformity 2001-02-19 Printing
国家林业局, data uniformity
Professional Standard - Aerospace, data uniformity
- QJ 970-1986 Rigid solid average linear expansion coefficient test method
ES-UNE, data uniformity