ZH
RU
ES
Ultrasonic injury control instrument
Ultrasonic injury control instrument, Total:227 items.
In the international standard classification, Ultrasonic injury control instrument involves: Non-destructive testing, Pipeline components and pipelines, Acoustics and acoustic measurements, Testing of metals, Shipbuilding and marine structures in general, Iron and steel products, Equipment for railway/cableway construction and maintenance, Linear and angular measurements, Metrology and measurement in general, Ground service and maintenance equipment, Welding, brazing and soldering, Fluid storage devices, Compressors and pneumatic machines, Construction equipment, Gas and steam turbines. Steam engines, Non-ferrous metals, Construction of waterways and ports, Geology. Meteorology. Hydrology, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Medical equipment, Springs, Hand-held tools, Surface treatment and coating, Rails and railway components, Paints and varnishes, Power stations in general, Mechanical testing, Electrical engineering in general, Refractories, Power transmission and distribution networks, Electrical accessories, Dentistry, Vocabularies.
Professional Standard - Railway, Ultrasonic injury control instrument
- TB/T 2340-2012 Rail Ultrasonic Flaw Detector
- TB/T 2494.1-1994 Ultrasonic Flaw Control of Newly Made Axle Axle by Rail Vehicle Axle Flaw Detection Method
- TB/T 1558-1984 Ultrasonic testing of butt welds
- TB/T 2340-2000 Technical conditions of multi-channel A-type display rail ultrasonic flaw detector
- TB/T 1606-1985 Ultrasonic Flaw Detection of Ductile Iron Crankshaft
- TB/T 2327-1992 Ultrasonic Flaw Detection Method of High Manganese Steel Frog
- TB/T 2634-1995 Specifications for Ultrasonic Flaw Detection Probes for Rails
- TB/T 2494.2-1994 Rail Vehicle Axle Flaw Detection Method Ultrasonic Flaw Detection of In-service Axles
- TB/T 2658.9-1995 Standard Rail Ultrasonic Flaw Detection Operation for Public Works
- TB/T 2452.1-1993 Integral thin-walled ductile iron piston non-destructive testing ductile iron piston ultrasonic testing
- TB/T 2494.2-2010 Inspecting method for axle of rail motor car Part 2:Ultrasonic inspection for in-service axle
- TB/T 2658.21-2007 Maintenance performance Part 21: Ultrasonic testing of rail welds
- TB/T 1659-1985 Ultrasonic flaw detection of aluminum base alloy bimetallic bearing bush on steel back of diesel locomotive
National Metrological Verification Regulations of the People's Republic of China, Ultrasonic injury control instrument
Korean Agency for Technology and Standards (KATS), Ultrasonic injury control instrument
- KS B 0534-2000 Method for assessing the overall performance characteristicsof ultrasonic pulse echo testing instrument
- KS D 0250-2001(2016) Ultrasonic examination for steel pipes and tubes
- KS D 0250-1982 Ultrasonic examination for steel pipes and tubes
- KS B ISO 10375:2008 Non-destructive testing－Ultrasonic inspection－Characterization of search unit and sound field
- KS B 0537-2005 Methods for assessing the electrical characteristics ofultrasonic testing instrument using pulse echo technique
- KS B 0537-1995 Methods for assessing the electrical characteristics of ultrasonic testing instrument using pulse echo technique
- KS B 0896-1999 Method for ultrasonic examination for welds of ferritic steel
- KS B 0896-2014 Method for ultrasonic examination for welds of ferritic steel
- KS B 0896-1977 Method for ultrasonic examination for welds of ferritic steel
- KS C 9706-2014 Ultrasonic ophthalmic biometers
- KS B 0522-1999(2009) Methods of ultrasonic examinationfor T type welds of aluminium plates
- KS B 0521-1999(2009) Methods of ultrasonic angle beam examinationfor welds of aluminium pipes and tubes
- KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
- KS B 0522-1999 Methods of ultrasonic examinationfor T type welds of aluminium plates
- KS B ISO 7963:2002 Welds in steel－Calibration block No.2 for ultrasonic examination of welds
- KS B 0521-1999 Methods of ultrasonic angle beam examinationfor welds of aluminium pipes and tubes
- KS B 0897-2014 Methods of ultrasonic angle beam examination for butt welds of aluminium plates
- KS B 0897-1999 Methods of ultrasonic angle beam examinationfor butt welds of aluminium plates
- KS B 0839-2006(2016) Methods and acceptance criteria of ultrasonic examination forgas pressure welds of reinforcing deformed bars
- KS B 0817-2006 General rule of ultrasonic testing of metals by pulse echo technique
- KS B 0544-2021 Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds
- KS B 0534-1995 Method for assessing the overall performance characteristics of ultrasonic pulse echo testing instrument
- KS B ISO 16828:2014 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- KS B 0537-2021 Methods for evaluating electronic characteristics of ultrasonic test instruments
National Metrological Technical Specifications of the People's Republic of China, Ultrasonic injury control instrument
- JJF 1338-2012 Calibration Specification for Ultrasonic Phased Array Flaw Detectors
- JJF 1862-2020 Calibration Specification for Large Multi-channel Ultrasonic Flaw Detectors
- JJF 1487-2014 Calibration Specification for Blocks used in Ultrasonic Testing
- JJF 1294-2011 Calibration Specification for Transducers of Ultrasonic Flaw Detector
- JJF 1650-2017 Calibration Specification for Field Parameters of Ultrasound Flaw Detector Transducers
- JJF 1126-2004 Calibration Specification for Ultrasonic Thickness Instruments
- JJF 1447-2014 Calibration Specification for Ultrasonic Flaw Detectors by Time-of-Flight Diffraction
- JJF 1934-2021 Calibration Specification for Ultrasonic Anemometers
Group Standards of the People's Republic of China, Ultrasonic injury control instrument
- T/SHZSAQS 00118-2022 Digital Ultrasonic Flaw Detector Operating Technical Regulations
- T/SHZSAQS 00116-2022 Ultrasonic Thickness Gauge Operating Technical Regulations
- T/CSTM 00666-2023 Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot
- T/CEC 555-2021 Technical Specifications for Partial Discharge Ultrasonic Detector
- T/CMA HG100-2023 Calibration Method for Standardround Tube of Ultrasonic Thickness Instruments
- T/CEC 357-2020 General technical specification for flashover locator based on ultrasonic method
- T/CSEE 0115-2019 Technical specifications for ultrasonic detectors for inspection of overhead distribution lines
Professional Standard - Ferrous Metallurgy, Ultrasonic injury control instrument
- YB/T 951-2003 Method of the ultrasonic inspection for rails
- YB/T 951-2014 Method of the ultrasonic testing for rails
- YB/T 951-1981 Rail Ultrasonic Flaw Detection Method
- YB 4094-1993 Ultrasonic flaw detection method of square steel (billet) for shells
- YB/T 036.10-1992 Ultrasonic flaw detection method for steel forgings in general technical conditions for metallurgical equipment manufacturing
Professional Standard-Ships, Ultrasonic injury control instrument
- CB/T 3907-1999 Ultrasonic crack detection of marine steel forgings
- CB 1134-1985 Ultrasonic Flaw Detection Method for BFe30-1-1 Pipe
- CB/Z 211-1984 Technical specification for ultrasonic flaw detection of marine metal composite materials
- CB/T 3559-1994 Manual Ultrasonic Flaw Detection Technology and Quality Grading of Ship Steel Weld Seam
U.S. Military Regulations and Norms, Ultrasonic injury control instrument
Professional Standard - Machinery, Ultrasonic injury control instrument
- JB/T 8931-1999 Ultrasonic examination for cladding
- JB/T 8467-1996 Supersonic flaw detection method for steel forgings
- JB/T 10061-1999 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique
- JB/T 7524-1994 Ultrasonic flaw detection of welding seam in building steel structure
- JB/T 9212-1999 Ultrasonic flaw detection of welds on steel oil tanks
- JB/T 5440-1991 Ultrasonic flaw detection of forged steel component of compressor
- JB/T 5441-1991 Ultrasonic flaw detection of casting steel component of compressor
- JB/T 4008-1999 Recommended practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
- JB/T 4009-1999 Recommended practice for ultrasonic pulse-echo straight-beam tesing by the contact method
- JB/T 11604-2013 Non-destructive testing instruments.Ultrasonic thickness gauge
- JB/T 1582-1996 Ultrasonic flaw detection of impeller forgings of turbine
- JB/T 4010-2006 Ultrasonic examination standard for tile steel retaining rings of turbine Generator
- JB/T 7367.1-2000 Non-destructive ultrasonic testing method of coiled helical compression springs
- JB/T 5439-1991 Ultrasonic flaw detection of nodular cast iron component of compressor
- JB/T 5093-1991 Specifications for Ultrasonic Flaw Detection of Friction Welded Valves of Internal Combustion Engines
- JB/T 9630.2-1999 Ultrasonic testing and quality classification methods of steel castings for steam turbines
- JB/T 1581-1996 Ultrasonic flaw detection of rotor and main shaft forgings of the turbine and turbogenerator
- JB/T 11276-2012 Non-destructive testing instruments.Nomenclatures for models of probes in ultrasonic
- JB/T 11779-2014 Non-destructive testing instrument.Specifications for phased array ultrasonic testing instruments
Japanese Industrial Standards Committee (JISC), Ultrasonic injury control instrument
- JIS G 0582:2004 Ultrasonic examination for steel pipes and tubes
- JIS G 0582:2012 Automated ultrasonic examination of steel pipes and tubes
- JIS G 0582:1990 Ultrasonic examination for steel pipes and tubes
- JIS G 0584:2004 Ultrasonic examination for arc welded steel pipes
- JIS G 0584:2014 Ultrasonic examination for arc welded steel pipes
- JIS G 0582 AMD 1:2015 Automated ultrasonic examination of steel pipes and tubes (Amendment 1)
- JIS G 0584:1990 Ultrasonic examination for arc welded steel pipes
- JIS Z 2351:2011 Method for evaluating electronic characteristics of ultrasonic test instruments
- JIS T 5750:2009 Dentistry -- Dental handpieces -- Ultrasonic instruments and tips for multi-purpose treatment
- JIS T 5750:2015 Dentistry -- Dental handpieces -- Ultrasonic instruments and tips for multi-purpose treatment
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultrasonic injury control instrument
- GB/T 28426-2012 Rail flaw detection vehicle
- GB/T 13316-1991 Method of ultrasonic inspection for cast steel rolls
- GB/T 7734-1987 Method for ultrasonic testing of clad steel plates
- GB/T 8651-2015 Flaw detection method by the ultrasonic plate wave for metal plates
- GB/T 3310-1999 Copper alloy bars-ultrasonic testing method
- GB/T 8651-2002 Metal plates-Flaw detection method by the ultrasonic plate wave
- GB/T 8361-2001 The surface of cold drawn rounds steel--Method for the ultrasonic inspection
- GB/T 5777-1996 Seamless steel pipe and tubing--Methods for ultrasonic testing
- GB/T 5777-2008 Ultrasonic testing method for seamless steel pipe
- GB/T 13315-1991 Method of ultrasonic inspection for forged steel cold rolling working rolls
- GB/T 12969.1-2007 Method of ultrasoic inspection for titanium and titanium alloy tubes
- GB/T 3310-2010 Ultrasonic testing method of copper and copper alloy bars
- GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
- GB 5193-1985 Method of ultrasonic inspection for wrought titanium and titanium alloy products
- GB/T 5193-1985 Method of ultrasonic inspection for wrought titanium and titanium alloy products
- GB/T 5193-2007 Method of ultrasonic inspection for wrought titanium and titanium alloy products
- GB/T 27992.3-2016 Instruments for water-depth measurement.Part 3:Echo sounder
- GB/T 11828.4-2011 Instruments for stage measurement.Part 4:Ultrasonic stage gauge
- GB/T 15830-1995 Method of ultrasonic inspetion and result classification of circumferential butt welds in steel pipes and tubes
Professional Standard - Water Conservancy, Ultrasonic injury control instrument
Guangdong Provincial Standard of the People's Republic of China, Ultrasonic injury control instrument
Shandong Provincial Standard of the People's Republic of China, Ultrasonic injury control instrument
RO-ASRO, Ultrasonic injury control instrument
RU-GOST R, Ultrasonic injury control instrument
- GOST R 55809-2013 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
- GOST 24507-1980 Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
- GOST R 50664-1994 Apparatus ultrasonic technological. Working frequencies
- GOST 18576-1996 Nondestructive testing. Railway rails. Ultrasonic testing methods
- GOST 23667-1985 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
- GOST R 8.847-2013 State system for ensuring the uniformity of measurements. Ultrasonic pulse flaw detectors. Methods and means for verification
- GOST R 55614-2013 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
- GOST R 57631-2017 Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- GOST 24830-1981 Concrite refractories. Ultrasonic method of quality control
Society of Automotive Engineers (SAE), Ultrasonic injury control instrument
Professional Standard - Military and Civilian Products, Ultrasonic injury control instrument
- WJ 2545-1999 Ultrasonic Flaw Detection of Cannon Barrel Contact Method
- WJ 1922-1990 Ultrasonic Automatic Flaw Detection Method for Steel Cartridge of Small Caliber Shell
- WJ 1956-1990 Gunpowder Performance Test Method Ultrasonic Flaw Detection of Double Base Single Hole Tubular Powder Column
Professional Standard - Non-ferrous Metal, Ultrasonic injury control instrument
- YS/T 1000-2014 Longitudinal wave method of ultrasonic inspection for copper and copper alloys tubes
- YS/T 585-2006 Method of ultrasonic inspection for copper and copper alloys plats
- YS/T 585-2013 Method of ultrasonic inspection for copper and copper alloys plates
IN-BIS, Ultrasonic injury control instrument
UNKNOWN, Ultrasonic injury control instrument
Professional Standard - Aviation, Ultrasonic injury control instrument
- HB/Z 74-1983 Instructions for Ultrasonic Flaw Detection of Aviation Aluminum Forgings
- HB 5169-1981 Ultrasonic Flaw Detection Method for Platinum-Iridium-25 Alloy Sheet
- HB 5358.1-1986 Quality Control Standards for Ultrasonic Inspection of Aeronautical Parts
Professional Standard - Construction Industry, Ultrasonic injury control instrument
- JG/T 5004-1992 Ultrasonic concrete tester
- JG/T 203-2007 Method for ultrasonic testing and classification for steel structures
- JG/T 3034.1-1996 Methods for ultrasonic testing and classification of welds for steel space grid structures with welded joints
- JG/T 3034.2-1996 Methods for ultrasonic testing and classification of welds for steel space grid structures with bolted joints
Association Francaise de Normalisation, Ultrasonic injury control instrument
- NF A09-341:1991 Non-destructive testing - Ultrasonic testing - Monitoring of equipment - Setting using control cards
- NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
- NF A89-524:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD).
- XP T30-129*XP CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
- NF A89-520:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment.
- NF EN 3718:2013 Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - Contrôle par ultrasons des tubes
- NF A09-022-1*NF EN ISO 18563-1:2015 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1 : instruments
- NF A09-320:1984 NON DESTRUCTIVE TESTING. MANUAL ULTRASONIC INSPECTION OF METALLIC PRODUCTS. SIMPLE IN-SERVICE CHECKING OF APPARATUS CHARACTERISTICS.
- NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
Professional Standard - Electricity, Ultrasonic injury control instrument
- DL/T 505-2005 The guide of ultrasonic inspection for welding of steam turbine shaft
- DL/T 718-2000 The ultrasonic inspection method for casting tee joint and elbow in power plant
- DL/T 1416-2015 General technical specifications for ultrasonic based partial discharge tester
International Organization for Standardization (ISO), Ultrasonic injury control instrument
- ISO 16823:2012 Non-destructive testing - Ultrasonic testing - Transmission technique
- ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- ISO 7963:1985 Welds in steel; Calibration block No. 2 for ultrasonic examination of welds
- ISO 2400:1972 Welds in steel; Reference block for the calibration of equipment for ultrasonic examination
- ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
- ISO 4773:2023 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
- ISO/CD 19397:2023 Determination of the film thickness of coatings using an ultrasonic gage
- ISO 16826:2012 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
- ISO/FDIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
- ISO/DIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
- ISO 4773:2011 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
- ISO 16828:2012 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
国家能源局, Ultrasonic injury control instrument
- NB/T 42068-2016 Ultrasonic flaw detection of screw expander main engine and rotor
- NB/T 10210-2019 Technical specification for ultrasonic wind speed and direction meter for wind turbines
Professional Standard - Traffic, Ultrasonic injury control instrument
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ultrasonic injury control instrument
American Society for Testing and Materials (ASTM), Ultrasonic injury control instrument
- ASTM A435/A435M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
- ASTM A578/A578M-07(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
- ASTM E2491-13 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
- ASTM A578/A578M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
- ASTM E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
- ASTM E2491-08 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
- ASTM E2491-06 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Examination Instruments and Systems
- ASTM E1324-00 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments
Professional Standard - Nuclear Industry, Ultrasonic injury control instrument
- EJ/T 768-1993 Ultrasonic flaw detection method and flaw detection result classification of nuclear grade container overlay welding layer
- EJ/T 958-1995 Ultrasonic longitudinal wave flaw detection method and acceptance criteria for nuclear shielded gray iron castings
KR-KS, Ultrasonic injury control instrument
- KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
European Committee for Electrotechnical Standardization（CENELEC）, Ultrasonic injury control instrument
- HD 87-1977 Testing and Calibration of Ultrasonic Therapeutic Equipment
Professional Standard - Petroleum, Ultrasonic injury control instrument
- SY/T 5446-1992 Non-destructive testing method for oil well pipes Ultrasonic flaw detection of drill pipe welds
- SY/T 4065-1993 Methods for ultrasonic inspection and quality classification of welded girth butt joints in oil and gas steel pipelines
Military Standard of the People's Republic of China-General Armament Department, Ultrasonic injury control instrument
- GJB 1076-1991 Ultrasonic flaw detection method of tungsten-based high-density alloy rods for armor-piercing projectiles
- GJB 593.1-1988 Non-destructive testing quality control specifications Ultrasonic longitudinal and transverse wave inspection
国家市场监督管理总局、中国国家标准化管理委员会, Ultrasonic injury control instrument
- GB/T 37361-2019 Determination of the film thickness—Ultrasonic thickness gauge method
German Institute for Standardization, Ultrasonic injury control instrument
- DIN CEN ISO/TS 19397:2018-05*DIN SPEC 55661:2018-05 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015); German version CEN ISO/TS 19397:2018
- DIN EN 3718:2012-08 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes; German and English version EN 3718:2012
- DIN EN ISO 18563-1:2022-12 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022); German version EN ISO 18563-1:2022
- DIN EN ISO 18563-1:2022 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
Professional Standard - Aerospace, Ultrasonic injury control instrument
- QJ 2252-1992 Ultrasonic flaw detection method and quality classification standard for superalloy forgings
- QJ 3197.2-2004 Non-destructive detection method for filament-wound chamber case of solid rocket motor --- Part 2:Ultrasonic detection
- QJ 1657-1989 Ultrasonic Flaw Detection Method for Fiberglass Wound Combustion Chamber Shell of Solid Rocket Motor
The Society for Protective Coatings (SSPC), Ultrasonic injury control instrument
- SSPC PA 9-2015 Measurement of Dry Coating Thickness Using Ultrasonic Gages
SSPC - The Society for Protective Coatings, Ultrasonic injury control instrument
- PA 9-2015 Measurement of Dry Coating Thickness Using Ultrasonic Gages
CEN - European Committee for Standardization, Ultrasonic injury control instrument
British Standards Institution (BSI), Ultrasonic injury control instrument
- PD CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
- PD IEC TS 62791:2022 Tracked Changes. Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types
- BS EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments
- BS EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments
- BS EN 16018:2011 Non-destructive testing. Terminology. Terms used in ultrasonic testing with phased arrays
- BS PD IEC/TS 62791:2015 Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
ES-UNE, Ultrasonic injury control instrument
- UNE-EN ISO 18563-1:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)
CZ-CSN, Ultrasonic injury control instrument
- CSN 01 5082-1976 Material resistante determination against cavitation erosion by ultrasonic vibratory apparatus
IEC - International Electrotechnical Commission, Ultrasonic injury control instrument
- TS 62791-2015 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types (Edition 1.0)
HU-MSZT, Ultrasonic injury control instrument
European Committee for Standardization (CEN), Ultrasonic injury control instrument
- EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
American Society of Mechanical Engineers (ASME), Ultrasonic injury control instrument
未注明发布机构, Ultrasonic injury control instrument
- BS 4331-2:1972(1999) Methods Assessing the performance characteristics of ultrasonic flaw detection equipment — Part 2 : Electrical performance
American Gas Association, Ultrasonic injury control instrument
- AGA REPORT 9-2007 Measurement of Gas by Multipath Ultrasonic Meters (Second Edition; XQ0701; Also Known as API MPMS 14.9)
International Electrotechnical Commission (IEC), Ultrasonic injury control instrument
- IEC 87/542/CD:2013 IEC/TS 62791: Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and methods for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- IEC TS 62791:2015 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- IEC TS 62791:2022 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types