ZH
RU
ES
Negative pressure tank detection method
Negative pressure tank detection method, Total:279 items.
In the international standard classification, Negative pressure tank detection method involves: Non-destructive testing, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Fruits. Vegetables, Products of the chemical industry, Construction materials, Fluid power systems, Rubber and plastics products, Fluid storage devices, Structures of buildings, Pipeline components and pipelines, Chipless working equipment, Microbiology, Mining and quarrying, Cutting tools, Earthworks. Excavations. Foundation construction. Underground works, Geology. Meteorology. Hydrology, Surface treatment and coating, Components for electrical equipment, Petroleum, petroleum products and natural gas handling equipment, Road engineering, Power stations in general, Equipment for petroleum and natural gas industries, Sensory analysis, Road vehicle systems, Electrical equipment for working in special conditions, External sewage systems, Electricity. Magnetism. Electrical and magnetic measurements, Construction technology, Springs, Protection against excessive pressure, Adhesives, Elements of buildings, Medical sciences and health care facilities in general, Hand-held tools, Welding, brazing and soldering, Installations in buildings, Water quality, Waxes, bituminous materials and other petroleum products, Medical equipment, Linear and angular measurements, Acoustics and acoustic measurements, Internal combustion engines, Valves, Veterinary medicine, Farming and forestry, Materials for the reinforcement of composites, Graphic technology, Products of non-ferrous metals, Fasteners, Paints and varnishes, Plastics, Pumps, Protection against fire, Transformers. Reactors, Measurement of volume, mass, density, viscosity, Mechanical testing, Packaging materials and accessories, Integrated circuits. Microelectronics, Optoelectronics. Laser equipment.
Professional Standard - Machinery, Negative pressure tank detection method
- JB/T 10765-2007 Non-destructive testing-Magnetic flux leakage testing of atmospheric pressure metal storage tanks
- JB/T 10765-2023 Non-destructive testing—Magnetic flux leakage testing of atmospheric pressure metal storage tanks
- JB/T 9212-2010 Non-destructive testing.Test methods for ultrasonic testing of welds on steel tanks
- JB/T 10764-2007 Non-destructive testing-Acoustic emission testing and evaluation of atmospheric pressure metal storage tanks
- JB/T 12614-2016 Inspection methods of tool shanks with hydraulic chuck
- JB/T 12562-2015 Low pressure die-casting machine.Testing methods of technology capability
- JB/T 7367-2013 Magnetic particle inspection for helical compression springs
- JB/T 7667-1995 In-service pressure vessels acoustic emission inspection and assessment method
- JB/T 11762-2013 Coiled helical compression springs.Non-destructive ultrasonic testing method
- JB/T 6916-1993 In-service high pressure cylinder - Checking and assessment method of acoustic emission
- JB/T 8543.1-1997 Non-destructive testing for parts of pump - Radiographic testing techniques for pressure steel castings of pump and classification of negative plates
Professional Standard - Chemical Industry, Negative pressure tank detection method
- HG/T 2113-2011 Testing and measuring methods for rubber autoclave
- HG/T 2113-1991 Horizontal vulcanization tank detection method
- HG/T 2150-2009 Measuring method of rubber calenders & plastics calenders
- HG/T 2150-1991 Testing methods for rubber and plastic calenders
- HG/T 3801-2005 Testing and measuring methods for twin-screw extruder of rubber
- HG/T 3175-2002 Fabrication and inspection method for High pressure urea equipment ultrasonic examination(UT) on the strip overlay welds of stainless steel
Professional Standard - Agriculture, Negative pressure tank detection method
- GB 4546-1998 Test method for internal pressure resistance of glass bottles and jars
Professional Standard - Petroleum, Negative pressure tank detection method
- SY/T 4080-1995 Test Methods for Leakage Detection in Pipeline and Tank
- SY/T 0329-2004 Detection method of large oil tank foundation
- SY/T 0480-2010 Test methods for leakage detection in pipeline and tank
- SY 0480-2010 Standard for Leakage Detection Methods for Pipeline Storage Tanks
- SY/T 5623-1997 Prediction and detection methods of formation pore pressure
- SY/T 6423.1-1999 Petroleum and natural gas industries.Non-destructive testing (NDT)methods of steel tubers for pressure purposes.Radiographic testing of the weld seam of submerged arc-welded steel tubes for the detection of imperfections
Korean Agency for Technology and Standards (KATS), Negative pressure tank detection method
- KS H 2129-1978(1991) TESTING METHODS FOR CHESTNUT, CANNED
- KS B 8201-2004 Test method of thermal performance for solar storage tanks
- KS B 8201-1999 Test method of thermal performance for solar storage tanks
- KS B 0518-2009 Standard qualification procedure for gas pressure welding technique
- KS F 2597-2011 Standard test method for water penetration depth into concrete under pressure
- KS F 2353-2010(2017) Standard test method for specific bulk gravity of compacted asphalt mixtures
- KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
- KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
Group Standards of the People's Republic of China, Negative pressure tank detection method
- T/ZJRHXH 0001-2022 Test method for canned scented candles
- T/CBMCA 031-2022 On-site detection method of negative ion functional building materials
- T/CCSAS 020-2022 Corrosion monitoring methods and implementation guidelines for atmospheric storage tanks
- T/ZJASE 022-2023 Rules and Methods for Vapor Recovery System Testing of Petroleum Transportation Facility (truck tank)
- T/ESD 2005-2022 Measurement method for fractional voltage of planar materials
- T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
- T/SDZDH 002-2020 Mask ventilation resistance and pressure difference detector Calibration method
- T/PSC 1.5-2022 Ballast water detection method for ships—— Part 5: Vibrio cholerae
- T/PSC 1.6-2022 Determination for ballast water of ships—Part 6 :Biological toxicity assay
- T/PSC 1.7-2022 Determinationg for ballast water of ships—Part 7 :Total amount of bacteria
- T/PSC 1.4-2022 Determination for ballast water of ships——Part 4: Intestinal Enterococci
- T/GDCKCJH 045-2021 Test methods of sound source acoustic imaging and engine's SPL in ship
- T/CAMS /CICEIA24-2019 Reciprocating internal combustion engine-Turbocharger- Method for leakage-measurement
- T/PSC 1.3-2022 Determination for ballast water of ships——Part 3: Escherichia coli
Indonesia Standards, Negative pressure tank detection method
- SNI 03-6760-2002 Test method for reinforced concrete floor loading at multistoried buildings by water load
- SNI 03-6761-2002 Test method for single pile for static axial tensile load
- SNI 03-6796-2002 Test method for determination of soil beraing power by static load at shallow foundation
- SNI 03-6758-2002 Test method for compressive strength of asphalt mixture
- SNI 03-6877-2002 Test methods for uncompacted void content of fine aggregates
- SNI 03-3387-1994 Test methods for static pressure of manhole tops and gally tops
- SNI 03-6755-2002 Test methods for bulk specific gravity of compact asphalt mixture using parafin layer test specimens
- SNI 03-6757-2002 Test method for bulk specific gravity of compact asphalt mixture using saturated surface dry test specimens
API - American Petroleum Institute, Negative pressure tank detection method
- API RP 575-2005 Guidelines and Methods for Inspection of Existing Atmospheric and Low-Pressure Storage Tanks (Second Edition)
- API RP 575 CHINESE-2005 Guidelines and Methods for Inspection of Existing Atmospheric and Low-Pressure Storage Tanks (Second Edition)
- API PUBL 325-1994 Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks
- API PUBL 307-1991 An Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
- API PUBL 322-1994 Engineering Evaluation of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
- API PUBL 307-1992 Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
- API PUBL 323-1994 Engineering Evaluation of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
- API PUBL 306-1991 An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
Professional Standard - Commodity Inspection, Negative pressure tank detection method
- SN/T 2100-2008 Rapid Determination of the commercial sterilization in canned food
- SN/T 0856-2011 Method for the determination of tin in canned food for import and export
- SN/T 2185-2008 Standard practice for convenient compression pressure indexing in determination of gasoline research octane number
- SN/T 3541-2013 Determination of multiple ether herbicides sesidues in foods for export.GC-MS/NCI method
American Society for Testing and Materials (ASTM), Negative pressure tank detection method
- ASTM C1719-11 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1719-11(2017) Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1244-11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1244M-11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
- ASTM C839-82(2005) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM C839-82(2010) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- ASTM C839-82(1999) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM C839-82(2020) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM C839-82(2015) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM C1214M-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM C1214M-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM C1214-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- ASTM C1214-02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- ASTM C1214-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- ASTM C1244-02 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1244-93(2000) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1244-02e1 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1618M-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
- ASTM C1214M-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM C1214M-02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM C1214M-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM C1244M-93 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test (Metric)
- ASTM D2293-96(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
- ASTM C1244-05ae1 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1244-05a Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1244-11(2017) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1214-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- ASTM C1244M-11(2017) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
- ASTM D3931-08(2015) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM F2267-04(2018) Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
- ASTM F2267-22 Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
- ASTM F2267-04(2011) Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
- ASTM D3931-93a(2005) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3931-93a(1999)e1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3931-08 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM B548-90(1997) Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
- ASTM D6641/D6641M-01e1 Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
- ASTM C1244M-05 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
- ASTM C1244M-05ae1 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
- ASTM C1244M-05a Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
- ASTM C1244M-04 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
- ASTM D4680-98 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM D4680-98(2004) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM D5325-03 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
- ASTM F2267-04 Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
- ASTM F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
- ASTM D6454-99(2011) Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
International Organization for Standardization (ISO), Negative pressure tank detection method
- ISO/TS 13725:2001 Hydraulic fluid power - Cylinders - Method for determining the buckling load
- ISO 4266-1:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks
- ISO 4266-4:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks
- ISO/CD 4266-6:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
- ISO/CD 4266-3:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
- ISO 16526-1:2011 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method
- ISO/CD 6366:2023 Non-destructive testing — Leak testing — Radioactive tracer methods for pressured vessels and underground pipelines
- ISO 6190:1988 Acoustics; measurement of sound pressure levels of gas turbine installations for evaluating environmental noise; survey method
- ISO 16526-3:2011 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method
国家市场监督管理总局、中国国家标准化管理委员会, Negative pressure tank detection method
- GB/T 23711.4-2019 Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection
- GB/T 37365-2019 Die casting unit—Performance testing method
- GB/T 15227-2019 Test method of air permeability, watertightness, wind load resistance performance for curtain walls
- GB/T 7106-2019 Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors
- GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
- GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
RO-ASRO, Negative pressure tank detection method
- STAS 6669/2-1986 HIGH-VOLTAGE TESTS Test methods
- STAS 7246/9-1974 THREE-PHASE INDUCTION MOTORS Methods of test Eeteimination of on load performances
- STAS SR ISO 3723:1993 Hydraulic fluid power. Fifter elements. Method for end load test
- STAS 3686/5-1974 CIRCUIT - BREAKERS FOR ALTERNATING VOLTAGES ABOVE 1 kV Methods for load operating tests
- STAS 7345/2-1975 ASBESTOS-CEMENT TUBES AND SOCKETS FOR PRESSURE PIPES Rules and methods for inspection
- STAS 6563-1983 MEASUREMENT OF PRESSURE, SPEED AND FLOW BY MEAN'S OF PITOT-PRANDTL TUBE Measuring methods
HU-MSZT, Negative pressure tank detection method
Compressed Gas Association (U.S.), Negative pressure tank detection method
- CGA C-17-2008 Methods to avoid and detect internal gas cylinder corrosion
American Society of Mechanical Engineers (ASME), Negative pressure tank detection method
Association Francaise de Normalisation, Negative pressure tank detection method
- NF EN 13160-5:2017 Systèmes de détection de fuites - Partie 5 : exigences et méthodes d'essai/d'évaluation des systèmes de détection de fuites en citernes et des systèmes de tuyauterie sous pression
- NF E86-601-5*NF EN 13160-5:2017 Leak detection systems - Part 5 : requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
- NF E86-601-3*NF EN 13160-3:2017 Leak detection systems - Part 3 : requirements and test/assessment methods for liquid systems for tanks
- NF EN 13160-3:2017 Systèmes de détection de fuites - Partie 3 : exigences et méthodes d'essai/d'évaluation des systèmes à liquide pour des réservoirs
- NF U47-308:2004 Animal health analysis methods - Control protocol for reagents for detection of antibodies directed against brucellosis bovine by the ELISA method in bulk tank samplessamples.
- NF EN 60444-4:2001 Mesure des paramètres des quartz piézoélectriques par la technique de phase nulle dans le circuit en pi - Partie 4 : méthode pour la mesure de la fréquence de résonance à la charge fL et de la résistance de résonance à la charge RL et pour le...
European Committee for Standardization (CEN), Negative pressure tank detection method
- EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
- EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
- EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
- EN 1926:1999 Natural Stone Test Methods - Determination of Compressive Strength
- EN ISO 16526-1:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
- EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength
- EN 12295:1999 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
- EN 846-6:2012 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- prEN ISO 3459:2021 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leak tightness under negative pressure (ISO/DIS 3459:2021)
- EN 846-5:2000 Methods of Test for Ancillary Components for Masonry - Part 5: Determination of Tensile and Compressive Load Capacity and Load Displacement Characteristics of Wall Ties (Couple Test)
- EN 846-6:2000 Methods of Test for Ancillary Components for Masonry - Part 6: Determination of Tensile and Compressive Load Capacity and Load Displacement Characteristics of Wall Ties (Single End Test)
- EN ISO 16526-3:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
Professional Standard - Electron, Negative pressure tank detection method
- SJ/T 31459-1994 Requirements of readiness and methods of inspection and assessment for wet gas-holders and low-pressure tanks
Guangdong Provincial Standard of the People's Republic of China, Negative pressure tank detection method
工业和信息化部, Negative pressure tank detection method
- QB/T 5505-2020 PCR method for detection of components derived from cattle, sheep, pigs, chickens and ducks in canned meat
- JB/T 13247-2018 Low pressure casting machine energy consumption detection method
British Standards Institution (BSI), Negative pressure tank detection method
- BS EN 13160-5:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
- BS ISO 4266-4:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
- BS EN 13160-3:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for liquid systems for tanks
- BS ISO 4266-1:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks
- BS EN 846-5:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
- 22/30461348 DC BS ISO 4266-4. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 4. Measurement of temperature in atmospheric tanks
- 22/30461339 DC BS ISO 4266-1. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 1. Measurement of level in atmospheric tanks
- BS EN 846-6:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- BS EN ISO 16526-3:2020 Tracked Changes. Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Spectrometric method
German Institute for Standardization, Negative pressure tank detection method
- DIN EN 13160-5:2016-12 Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems; German version EN 13160-5:2016
- DIN EN 12372:1999 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:1999
- DIN EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load; English version of DIN EN 12372:2007-02
- DIN EN 13160-3:2016-12 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks; German version EN 13160-3:2016
- DIN EN 13184:2001 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
- DIN EN ISO 16526-1:2020-09 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011); German version EN ISO 16526-1:2020
- DIN EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015); German and English version EN ISO 3459:2015
RU-GOST R, Negative pressure tank detection method
- GOST 10444.2-1975 Canned foods. Methods for microbiological examination. Detection of coagulase-positive staphylococcus
- GOST EN 1605-2011 Thermal insulating products in building applications. Method for determination under specified compressive load and temperature conditions
- GOST 8.224-1976 State system for ensuring the uniformity of measurements. High-pressure-air ganging instuments of flowmeter type. Methods and means of verification
- GOST R 51049-2008 Fire equipment. Pressure fire hoses. General technical requirements. Test methods
- GOST R 51049-1997 Fire engineering. Fire pressure hoses. General technical requirements. Test methods
- GOST 24613.5-1981 Optoelectronic integrated microcircuits. Method of zero remapend voltage measurement of commutators of analog signals and load
National Metrological Verification Regulations of the People's Republic of China, Negative pressure tank detection method
Professional Standard - Ocean, Negative pressure tank detection method
- HY/T 269-2018 Testing method of ocean pressure measuring instrument
National Metrological Technical Specifications of the People's Republic of China, Negative pressure tank detection method
- JJF 2041-2023 Method for Transformer Secondary Loop Voltage Drop and Loads Field Testing
工业和信息化部/国家能源局, Negative pressure tank detection method
- JB/T 12920-2016 Method for detecting water content of hydraulic transmission hydraulic oil
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Negative pressure tank detection method
- GB/T 27743-2011 Inspection method for transformer of special equipment
- GB/T 15227-1994 Test method of deformation under wind pressure for building curtain walls
- GB/T 42719-2023 Triboelectric voltage detection method for planar materials
- GB/T 7106-2002 Graduation and test method for wind resistance performance of windows
- GB/T 6626.4-1986 Test methods for the characteristics of getter-mercury dispenser--Method for peel off test of getter-mercury dispenser
- GB/T 15227-2007 Test method of air permeability,watertightness,wind load resistance performance for curtain walls
- GB/T 18182-2000 Acoustic emission examination and evaluation of metallic pressure vessels
- GB/T 18182-2012 Acoustic emission examination and evaluation of metallic pressure vessels
- GB/T 19496-2004 Determinating of the compressive strength of spun high-strength concrete cores
- GB/T 29907-2013 Test method for watertightness of curtain walls under dynamic wind pressure
- GB/T 13685-1992 Graduation of resisting wind pressure capacity and the test method for building external doors
- GB/T 7106-2008 Graduations and test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors
AENOR, Negative pressure tank detection method
- UNE-EN 13160-5:2017 Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
- UNE-EN 13160-3:2017 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
- UNE-EN 12544-1:2000 NON-DESTRUCTIVE TESTING - MEASUREMENT AND EVALUATION OF THE X-RAY TUBE VOLTAGE - PART 1: VOLTAGE DIVIDER METHOD.
- UNE 104309-3:2004 Waterproofing. Part 3: Liquid materials for tanks used in hydraulic works. Specifications, test methods and application.
IN-BIS, Negative pressure tank detection method
PL-PKN, Negative pressure tank detection method
- PN M04600-1972 Industrial compressor refrigerating plants Testing methods
CZ-CSN, Negative pressure tank detection method
- CSN 11 9531-1989 Unified system of hydraulic components. General engineering. Filter elements. Method for axial load test
- CSN 56 0246 Cast.3-1988 Testing methods for canning semi-products and products from fruit and vegetables. Sensory tests
NATO - North Atlantic Treaty Organization, Negative pressure tank detection method
- AEP-71-2013 FIT AND PROTECTION TESTING METHODS FOR NEGATIVE-PRESSURE RESPIRATORS (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email:
BR-ABNT, Negative pressure tank detection method
Professional Standard - Electricity, Negative pressure tank detection method
- DL/T 385-2010 Determination of electrostatic charging tendency of transformer oil
- DL/T 2050-2019 On-site detection method of transient earth voltage partial discharge in high voltage switchgear
- DL/T 1534-2016 UHF detection method for partial discharge of oil-immersed power transformer
Professional Standard - Aerospace, Negative pressure tank detection method
Japanese Industrial Standards Committee (JISC), Negative pressure tank detection method
Jiangxi Provincial Standard of the People's Republic of China, Negative pressure tank detection method
- DB36/ 789-2014 Ultrasonic guided wave testing method for steel pressure pipelines
- DB36/T 789-2023 Ultrasonic guided wave detection method for steel pressure pipelines
Military Standard of the People's Republic of China-General Armament Department, Negative pressure tank detection method
- GJB 2044-1994 Acoustic emission detection method for titanium alloy pressure vessels
- GJB 2044A-2021 Acoustic emission detection method for titanium alloy pressure vessels
- GJB 8619-2015 Method for detecting water content of working fluid in aircraft hydraulic system
国家发展和改革委员会, Negative pressure tank detection method
- HG/T 3801-2006 Detection method of rubber twin-screw extrusion tablet press
Professional Standard - Meteorology, Negative pressure tank detection method
- QX/T 126-2011 Test method of calibration device for aneroid barometer(barograph)
Professional Standard - Textile, Negative pressure tank detection method
- FZ/T 70015-2022 Measuring method and evaluation of pressure in knitted tights
Professional Standard - Energy, Negative pressure tank detection method
- DL/T 2407-2021 Field Detection Method of Gas Content in Transformer Oil
SE-SIS, Negative pressure tank detection method
- SIS SS 25 12 62-1980 Textiles — Yarn from packages — Method for determination of breaking load and elongation at the breaking load of single strands - (CRL, CRE and CRT testers)
- SIS SEN 27 01 21-1967 Small power transformers and inductors Quality requirements and test methods
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Negative pressure tank detection method
- GJB 5886-2006 Determination method for water content of operating fluid for aviation hydraulic system
American National Standards Institute （ANSI), Negative pressure tank detection method
Standard Association of Australia （SAA）, Negative pressure tank detection method
- AS 1012.14:1991 Methods of testing concrete - Method for securing and testing cores from hardened concrete for compressive strength
Lithuanian Standards Office , Negative pressure tank detection method
- LST ISO 4266-1:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 1: Measurement of level in atmospheric tanks (idt ISO 4266-1:2002)
- LST ISO 4266-4:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 4: Measurement of temperature in atmospheric tanks (idt ISO 4266-4:2002)
- LST ISO 4266-3:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 3: Measurement of level in pressurized storage tanks (non-refrigerated) (idt ISO 4266-3:2002)
- LST ISO 4266-6:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 6: Measurement of temperature in pressurized storage tanks (non- refrigerated) (idt ISO 4266-6:2002)
KR-KS, Negative pressure tank detection method
ES-UNE, Negative pressure tank detection method
- UNE-EN ISO 16526-1:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
- UNE-EN 976-1:1999 ERRATUM UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Negative pressure tank detection method
- GB/T 34555-2017 Test method of air permeability, watertightness,wind load resistance performance for building skylight system
- GB/T 33488.4-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination
- GB/T 33488.2-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination
- GB/T 33488.3-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination
Chongqing Provincial Standard of the People's Republic of China, Negative pressure tank detection method
- DB50/T 504-2013 The detection method of the front valve of the differential pressure integral type micro-flow metering compensation meter
- DB50/T 508-2013 On-site detection method of 35kV and below AC power high-voltage metering device
Professional Standard - Non-ferrous Metal, Negative pressure tank detection method
- YS/T 63.15-2006 Carbonaceous materials used in the production of aluminium. Part 15:Determination of compressive strength
- YS/T 63.15-2012 Carbonaceous materials used in the production of aluminium.Part 15:Determination of compressive strength
- YS/T 63.15-2023 Carbonaceous materials used for the production of aluminium — Part 15:Determination of compressive strength
Canadian General Standards Board （CGSB), Negative pressure tank detection method
PT-IPQ, Negative pressure tank detection method
- NP EN 12295-2002 Plastics piping systems Thermoplastics pipes and associated fitting for hot and cold water Test method for resistance of joints to pressure cycling
Professional Standard - Press and Publication, Negative pressure tank detection method
- CY/T 220-2020 Requirements and inspection methods for on-line inspection of web rotary die-cutting and printing quality
- CY/T 60-2009 Hot stamping and embossing process control and detection method for paper printed matter
DE-GPVA, Negative pressure tank detection method
Danish Standards Foundation, Negative pressure tank detection method
- DS/ISO 6190:1990 Acoustics. Measurement of sound pressure levels of gas turbine installations for evaluating environmental noise. Survey method
BE-NBN, Negative pressure tank detection method
- NBN-ISO 3746:1992 Acoustics. Determination of sound power levels of noise sources. Survey method
Professional Standard - Construction Industry, Negative pressure tank detection method
- JG/T 211-2007 Field test method of air permeability, watertightness, wind load resistance performance for exterior windows
Tianjin Provincial Standard of the People's Republic of China, Negative pressure tank detection method
- DB12/T 861-2018 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
- DB12/T 861-2019 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
Anhui Provincial Standard of the People's Republic of China, Negative pressure tank detection method
- DB34/T 1711-2012 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
- DB34/T 1711-2023 Ultrasonic detection method for circumferential cracks in threads of high-pressure stud bolts in service
AT-ON, Negative pressure tank detection method
- OENORM EN ISO 3459:2021 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leak tightness under negative pressure (ISO/DIS 3459:2021)
ZA-SANS, Negative pressure tank detection method
- SANS 12295:1999 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
- SANS 319:2008 Measuring systems - Cryogenic liquids and other selected liquid gases in vertical tanks - Pressure differential method
GOSTR, Negative pressure tank detection method
- GOST R 51049-2019 Fire equipment. Fire pressure hoses. General technical requirements. Test methods