ZH
RU
ES

Micro sample volume measurement

Micro sample volume measurement, Total:301 items.

In the international standard classification, Micro sample volume measurement involves: Fuels, Materials for aerospace construction, Laboratory medicine, Leather technology, Products of the textile industry, Air quality, Inorganic chemicals, Plastics, General methods of tests and analysis for food products, Metalliferous minerals, Construction materials, Organic chemicals, Test conditions and procedures in general, Radiation measurements, Nuclear energy engineering, Raw materials for rubber and plastics, Soil quality. Pedology, Fertilizers, Cellular materials, Microbiology, Equipment for petroleum and natural gas industries, Analytical chemistry, Medical sciences and health care facilities in general, Hydraulic fluids, Medical equipment, Semiconducting materials, Rubber and plastics products, Fruits. Vegetables, Food products in general, Prepackaged and prepared foods, Milk and milk products, Physics. Chemistry, Products of the chemical industry, Quantities and units, Aerospace fluid systems and components, Wastes, Metrology and measurement in general, Refractories, Non-ferrous metals, Pumps, Ferroalloys, Cereals, pulses and derived products, Measurement of volume, mass, density, viscosity, Ceramics, Petroleum products in general, Glass, Road engineering, Ferrous metals, Testing of metals, Water quality, Adhesives.

American Society for Testing and Materials (ASTM), Micro sample volume measurement

ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(2003) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(2008) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1728-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E1728-02 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM D5368-93(2001) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-93(2006) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-13 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM C559-16 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM D5074-90(1999) Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
ASTM D5074-90(2019)e1 Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
ASTM D5074-90(2022) Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
ASTM E2927-13 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM C1234-11(2019) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D4309-96 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
ASTM D4309-02 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
ASTM E2927-16 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM E2927-16e1 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons

Military Standards (MIL-STD), Micro sample volume measurement

DOD A-A-53588-1988 PIPET, VOLUMETRIC (MICRO)

Professional Standard - Petrochemical Industry, Micro sample volume measurement

SH/T 0638-1996 Microcrystalline Wax Oil Content Determination (Volume Method)

American National Standards Institute （ANSI), Micro sample volume measurement

ANSI/NCCLS H7-A 2-1996 Procedure for Determining Packed Cell Volume by the Microhematocrit Method
ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens
ANSI/ESD STM11.12-2021 The Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurement of Planar Materials
BS EN ISO 18134-3:2023 Solid biofuels. Determination of moisture content Moisture in general analysis sample (British Standard)

PT-IPQ, Micro sample volume measurement

NP 1014-1987
NP EN 12286-2000 In vitro diagnostic medical devices Measurement of quantities in samples of boilogical origin Presentation of reference measurement procedures
NP 1178-1976
NP EN 12127-1999 Textiles Fabrics. Determination of mass per unit área using small samples
NP 4403-2001 Cereal products Durum wheat semolinas Determination of the undersize fraction
NP 4372-1999 Solid fuels Coals and cokes Determination of moisture in the analysis sample by the indirect gravimetric method (ASTMmethod)
NP 988-2000 Cereais Détermination of bulk density, called "mass per hectolitre" Routine method
NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method

BE-NBN, Micro sample volume measurement

NBN T 03-251-1980 Liquid chlorine for industrial use - Method of sampling (for deter-mining only the volumetric chlorine content)

German Institute for Standardization, Micro sample volume measurement

DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN EN 17817:2022 Fertilizing products - Determination of the quantity (indicated by mass or volume); German and English version prEN 17817:2022
DIN EN 17817:2022-02 Fertilizing products - Determination of the quantity (indicated by mass or volume); German and English version prEN 17817:2022 / Note: Date of issue 2022-01-21
DIN EN 12127:1997-12 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN 50451-5:2010 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 5: Guideline for the selection of materials and testing of their suitability for apparatus for sampling and sample preparation for the determination of t
DIN EN ISO 20130:2021-02 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018); German version EN ISO 20130:2020
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN 51718:2002-06 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry); German version EN 15111:2007
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN ISO/TS 22939:2011 Soil quality - Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates (ISO/TS 22939:2010)
DIN ISO 5884:1989 Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
DIN EN ISO 15193:2009-10 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009); German version EN ISO 15193:2009
DIN EN 15111:2007-06 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry); German version EN 15111:2007
DIN 53380-1:2000 Testing of plastics - Determination of gas transmissionsrate - Part 1: Volumetrical method for testing of plastic films
DIN EN ISO 18153:2003-11 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003); German version EN ISO 181...
DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:2007
DIN EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
DIN EN ISO 17511:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003)
DIN ISO 91:2019-12 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions (ISO 91:2017)
DIN EN 15765:2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion; German version EN 15765:2009
DIN EN ISO 18187:2018-07 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016); German version EN ISO 18187:2018
DIN EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009); English version of DIN EN ISO 15193:2009-10
DIN EN 15765:2010-04 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion; German version EN 15765:2009

Association Francaise de Normalisation, Micro sample volume measurement

NF X43-200*NF EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
NF G07-170*NF EN 12127:1998 Textiles. Fabrics. Determination of mass per unit area using small samples.
NF M60-812-1:2006 Nuclear Energy - Measurement of environmental radioactivity - Part 1 : guide for the measurement of airborne C14 volumetric activity from an atmospheric sample.
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
X31-150:1984 Soils, sediments, fertilizers and soil conditioners, growthmedium. Preparation of test sample for determination of metallic trace elements.
NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
NF V03-098*NF EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry).
NF M08-025*NF ISO 15169:2004 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems.
NF S92-019*NF EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
NF ISO 15169:2004 Pétrole et produits pétroliers liquides - Détermination du volume, de la masse volumique et de la masse d'hydrocarbures contenus dans les réservoirs cylindriques verticaux à l'aide de systèmes hybrides de mesurage
NF EN ISO 15193:2009 Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Exigences relatives au contenu et à la présentation des procédures de mesure de référence
NF B41-204-2*NF EN ISO 13383-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2 : determination of phase volume fraction by evaluation of micrographs
NF B10-503:1973 QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF POROSITY, OF THE TRUE WEIGHT PER UNIT VOLUME, AND OF THE APPARENT WEIGHT PER UNIT VOLUME.
NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
NF EN ISO 21424:2020 Lait, produits laitiers, formules infantiles et produits nutritionnels pour adultes - Détermination de la teneur en minéraux et en oligo-éléments - Méthode par spectrométrie de masse avec plasma à couplage inductif (ICP-SM)
NF M08-011*NF ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
NF ISO 91:2017 Pétrole et produits connexes - Facteurs de correction de volume par rapport à la température et à la pression (tables de mesure du pétrole) et conditions de référence standard
NF EN ISO 18187:2018 Qualité du sol - Essai contact pour échantillons solides utilisant l'activité déshydrogénase de Arthrobacter globiformis
NF EN 15765:2010 Produits alimentaires - Dosage des éléments traces - Dosage de l'étain par spectrométrie de masse à plasma induit par haute fréquence (ICP-MS) après digestion sous pression
NF EN ISO 18153:2004 Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Traçabilité métrologique des valeurs de concentration catalytique des enzymes attribuées aux agents d'étalonnage et aux matériau...
NF EN 15111:2007 Produits alimentaires - Dosage des éléments traces - Dosage de l'iode par spectrométrie d'émission avec plasma induit par haute fréquence et spectromètre de masse (ICP-SM)

International Organization for Standardization (ISO), Micro sample volume measurement

ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
ISO/CD 18239-1:1976 Iron ores — Determination of loss on ignition — Part 1: Single micro sample TGA
ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO 20130:2018 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO/TS 22939:2019 Soil quality — Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates
ISO/TS 22939:2010 Soil quality - Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates
ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
ISO 13383-2:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2: Determination of phase volume fraction by evaluation of micrographs
ISO 21151:2020 In vitro diagnostic medical devices — Requirements for international harmonisation protocols establishing metrological traceability of values assigned to calibrators and human samples
ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO 10872:2020 Water and soil quality — Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
ISO/CD 18187 Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
ISO/DIS 18187:2023 Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
ISO 8691:1994 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing

British Standards Institution (BSI), Micro sample volume measurement

BS EN ISO 13138:2012 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
BS EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
22/30440785 DC BS EN 17817. Fertilizing products. Determination of the quantity (indicated by mass or volume)
BS 5551-2.7:1988 Fertilizers - Sampling - Recommendations for minimum mass of increment of a solid fertilizer to be taken to be representative of the total sampling unit
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
BS ISO 20130:2018 Soil quality. Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates
BS DD ISO/TS 22939:2010 Soil quality. Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates
BS EN ISO 20130:2020 Soil quality. Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates
BS EN ISO 17511:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials
BS EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
BS ISO 20298-1:2018 Fine bubble technology. Sampling and sample preparation for measurement - Ultrafine bubble dispersion in water
BS ISO 4269:2001 Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters
BS EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
PD ISO/TS 22939:2019 Tracked Changes. Soil quality. Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates
BS EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
DD CEN/TS 15111:2005 Foodstuffs. Determination of trace elements. Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry)
BS EN 14187-4:2017 Tracked Changes. Cold applied joint sealants. Test methods. Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
BS EN 13040:2007(2008) Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS EN ISO 18187:2018 Soil quality. Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
19/30378312 DC BS ISO 21151. In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for international harmonization protocols establishing metrological traceability of values assigned to calibrators and human samples
BS EN ISO 15194:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation
BS DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Moisture in general analysis sample
BS EN 15765:2009 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion
BS EN 15765:2010 Foodstuffs. Determination of trace elements. Determination of tin by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion
BS EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
BS EN ISO 10872:2021 Water and soil quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
BS 6200-3.22.1:1992 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of nitrogen - Steel: volumetric method
BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DD CEN/TS 15414-3:2006 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample
BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance

European Committee for Standardization (CEN), Micro sample volume measurement

EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples
EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018)
EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)
EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
EN ISO 13383-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2: Determination of phase volume fraction by evaluation of micrographs (ISO 13383-2:2012)
EN ISO 20764:2003 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
prEN ISO 18187 rev Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance

KR-KS, Micro sample volume measurement

KS M ISO 1552-2012 Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
KS D ISO 11438-1-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirement and sample dissolution
KS K ISO 21232-2022 Textiles — Determination of moisturizing effect of textile materials by measurement of microclimate between textiles and simulated human skin using sweating guarded hotplate

Danish Standards Foundation, Micro sample volume measurement

DS/EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
DS/EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
DS/EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
DS/EN 15765:2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
DS/EN ISO 20764:2004 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
DS/ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample

Lithuanian Standards Office , Micro sample volume measurement

LST EN 12127-1999 Textiles - Fabrics - Determination of mass per unit area using small samples
LST EN 13804-2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation
LST EN 12919-2001 Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods
LST EN 15111-2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
LST EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
LST EN 13040-2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
LST EN ISO 17511:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003)
LST EN ISO 21871:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method (ISO 21871:2006)
LST EN 15765-2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Micro sample volume measurement

GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 6324.4-1986 Determination of trace sulphur in products of organic liquid--Micro-coulometry method
GB/T 42843.1-2023 Micro-bubble technology measurement sampling and sample preparation Part 1: Ultra-fine bubble water dispersion system
GB/T 19702-2005 In vitro diagnostic medical devices.Measurement of quantities in samples of biological origin.Presentation of reference measurement procedures
GB/T 25964-2010 Petroleum and liquid petroleum products.Determination of volume,density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
GB/T 21415-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of values assigned to calibrators and control materials
GB/T 19703-2005 In vitro diagnostic medical devices-Measurement of quantities in samples of biological origin-Description of reference materials
GB/T 6324.4-2008 Test method of organic chemical products. Part 4: Determination of trace sulfur in organic liquid products. Microcoulometric method
GB/T 4120.5-1992 Liquid chlorinated methanes for industrial use--Determination of micro-amounts of water(cloud point method)
GB/T 38261-2019(英文版) Nanotechnology—Determination of silver contents in biological samples-Inductively coupled plasma mass spectrometry
GB/T 6324.12-2023 Test methods for organic chemical products Part 12: Determination of trace amounts of mercury in organic liquid chemical products Atomic fluorescence method

Korean Agency for Technology and Standards (KATS), Micro sample volume measurement

KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS M ISO 1552:2012 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
KS M ISO 1552:2013 Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
KS M ISO 4269-2014(2019) Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters
KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
KS M ISO 6073-2003(2008) Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS P ISO 17511-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values assigned to calibrators and control materials
KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS M ISO 15169-2005(2020) Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS M ISO 6073:2003 Petroleum products-Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS M ISO 6073:2013 Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS M ISO 15169:2005 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
KS M ISO 4269:2003 Petroleum and liquid petroleum products-Tank calibration by liquid measurement-Incremental method using volumetric meters
KS M ISO 4269:2014 Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters
KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS D ISO 11437-1-2012(2022) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirements and sample dissolution
KS D ISO 11437-1-2012(2017) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirements and sample dissolution
KS W ISO 5884:2007 Aerospace－Fluid systems and components－Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
KS P ISO 18153:2010 In vitro diagnostic medical devices-Measurement of quantities in biological samples-Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
KS K ISO 21232:2022 Textiles — Determination of moisturizing effect of textile materials by measurement of microclimate between textiles and simulated human skin using sweating guarded hotplate

RU-GOST R, Micro sample volume measurement

GOST EN 13804-2013 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
GOST 8756.10-2015 Fruit and vegetable products. Methods for determination of volume and mass fraction of the pulp
GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
GOST R 8.737-2011 State system for ensuring the uniformity of measurements. Geophysical well logging and petrophysical study of rock, fluids and gas samples. Units of measured quantities
GOST R 8.908-2015 State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
GOST ISO 17511-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
GOST 8.614-2013 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric water cut of oil and oil products
GOST R ISO 17511-2006 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
GOST 8756.1-2017 Fruit, vegetable and mushroom products. Methods for determination of organoleptic characteristics, components fraction of total mass and net mass or volume
GOST 8.190-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volume humidity content of petroleum and petroleum products
GOST R 57033-2016 Liquid petroleum products. Determination of trace chlorides, fluorides, and bromides by ion chromatography with sample combustion method (CIC)
GOST EN 15111-2015 Foodstuffs. Determination of trace elements. Determination of iodine by ISP-MS (inductively coupled plasma mass spectrometry)
GOST ISO 18153-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials
GOST R 54233-2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST 8.627-2013 State system for ensuring the traceability of measurements. In vitro diagnostics medicine test systems for measurement of quantities in biological samples. Part 1. Haematology analyzers. Verification procedure

Society of Automotive Engineers (SAE), Micro sample volume measurement

SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT

IT-UNI, Micro sample volume measurement

UNI 6795-1971
UNI 3518-1954
UNI EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates
UNI EN ISO 21660-3:2021 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample

CZ-CSN, Micro sample volume measurement

CSN 72 2603-1978 Testing of brick products. Determination of mass, volume mass and absorptivity

Professional Standard - Chemical Industry, Micro sample volume measurement

HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

Professional Standard - Agriculture, Micro sample volume measurement

GB 6324.4-1986 Determination of Trace Sulfur in Organic Liquid Products Microcoulometry

Standard Association of Australia （SAA）, Micro sample volume measurement

AS 2282.2:1999 Methods for testing flexible cellular polyurethane - Measurement of dimensions of test specimens
ISO 18134-3:2023 Solid biofuels — Determination of moisture content — Part 3: Moisture in general analysis sample

American Railway Engineering and Maintenance-of-Way Association (AREMA), Micro sample volume measurement

AREMA CH 3-8-1995 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote

未注明发布机构, Micro sample volume measurement

DIN EN ISO 8222:2022 Petroleum products measurement systems – Calibration – Volumetric measures, reference measuring containers and field measures (including equations for the properties of liquids and materials)
BS ISO 6073:1997(1999) Petroleum products — Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
BS EN ISO 15193:2009(2016) In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures
BS 3680-10C:1996(1999) Measurement of liquid flow in open channels — Part 10 : Sediment transport — Part 10 C : Guide to methods of sampling of sand - bed and cohesive - bed materials
BS EN 15763:2009(2010) Foodstuffs — Determination of trace elements — Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP - MS)
BS EN ISO 15194:2009(2016) In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation

CL-INN, Micro sample volume measurement

INDITECNOR 20-13ch-1960

CU-NC, Micro sample volume measurement

NC 24-23-1984 Inorganic Chemloal Products. Liquid Sodium. Hydroxide. Detarmination of the Content of Sodium Carbonate. Gas-Volumetric Method
NC 24-43-1985 Inorganic Chemical Products. Technical Hydrochloric Acid. Determination of Reducing or Oxidizing Substances by Volumetric Method

Professional Standard - Hygiene , Micro sample volume measurement

WS/T 254-2005 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Presentation of reference measurement procedures
WS/T 253-2005 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Description of reference materials

AREMA - American Railway Engineering and Maintenance-of-Way Association, Micro sample volume measurement

CHAPTER 3/PART 8-1995 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote (Volume 1/Track)
CHAPTER 30/PART 8-2000 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote (Chapters 3 and 10 Have Been Combined to Form Chapter 30; Volume 1/Track)

Professional Standard - Commodity Inspection, Micro sample volume measurement

SN/T 3605-2013 Determination of mercury content in liquid petroleum products.Direct injection method

ES-AENOR, Micro sample volume measurement

UNE 84-059-1988

ZA-SANS, Micro sample volume measurement

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

ES-UNE, Micro sample volume measurement

UNE-EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018) (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN ISO 18187:2018 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016) (Endorsed by Asociación Española de Normalización in April of 2018.)

Group Standards of the People's Republic of China, Micro sample volume measurement

T/NAIA 087-2021 Determination of Mercury Content in Coal-based Liquid Oil by Direct Sampling Method

国家市场监督管理总局、中国国家标准化管理委员会, Micro sample volume measurement

GB/T 38261-2019 Nanotechnology—Determination of silver contents in biological samples—Inductively coupled plasma mass spectrometry
GB/T 19702-2021 In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for content and presentation of reference measurement procedures
GB/T 19703-2020 In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation
GB/T 6324.11-2021 Test method of organic chemical products—Part 11：Determination of trace arsenic in liquid products—Atomic fluorescence spectrometric method
GB/T 6324.10-2020 Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method

YU-JUS, Micro sample volume measurement

JUS B.H8.310-1984 Methods of ana/ysis of coal and coke. Determination of moisture in the analysis sample of coal by the direct volumetric method

AT-ON, Micro sample volume measurement

OENORM EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018)

CH-SNV, Micro sample volume measurement

SN EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018)

PL-PKN, Micro sample volume measurement

PN-EN ISO 20130-2020-11 E Soil quality -- Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018)

CEN - European Committee for Standardization, Micro sample volume measurement

EN 12287:1999 In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Description of Reference Materials
EN 12286:1998 In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Presentation of Reference Measurement Procedures (Incorporates Amendment A1: 2000)
PD CEN/TS 15111:2005 Foodstuffs Determination of trace elements Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry)
EN 15765:2009 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion

SE-SIS, Micro sample volume measurement

SIS SS-ISO 5884:1989 Aerospace — Fluid systems and compo- nents — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

RO-ASRO, Micro sample volume measurement

STAS SR ISO 5884:1996 Aerospace - Fluid systems and components - Methods for system sampling and measuring the soiid partide contamination of hydraulic fluids

API - American Petroleum Institute, Micro sample volume measurement

API MPMS 11.1 VOL V-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume
API MPMS 14.1-2001 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 1 - Collecting and Handling of Natural Gas Samples for Custody Transfer (Fifth Edition)
API MPMS 14.1-2006 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 1 - Collecting and Handling of Natural Gas Samples for Custody Transfer (Sixth Edition)
API MPMS 14.1-1993 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 1 - Collecting and Handling of Natural Gas Samples for Custody Transfer (Fourth Edition)
API MPMS 14.1-2016 Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 1-Collecting and Handling of Natural Gas Samples for Custody Transfer (SEVENTH EDITION)
API MPMS 8.3-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (First Edition; ASTM D5854)

AENOR, Micro sample volume measurement

UNE-EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
UNE-EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
UNE-EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
UNE-EN 13040:2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
UNE-EN ISO 17511:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003)
UNE-EN ISO 21871:2007 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method (ISO 21871:2006)
UNE-EN 15765:2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion

Professional Standard - Medicine, Micro sample volume measurement

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

IN-BIS, Micro sample volume measurement

IS 6441 Pt.1-1972

HU-MSZT, Micro sample volume measurement

MSZ MI 19384-1981

GOSTR, Micro sample volume measurement

GOST 8.599-2010 State system for ensuring the uniformity of measurements. Density of light petroleum products. The tables for recalculation of density to 15 °С and 20 °С and to conditions of volume's measurement

ESD - ESD ASSOCIATION, Micro sample volume measurement

STM11.12-2000 Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

Association of German Mechanical Engineers, Micro sample volume measurement

VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration

AR-IRAM, Micro sample volume measurement

IRAM 6514-1960