ZH
RU
ES

dsc to test several times

dsc to test several times, Total:82 items.

In the international standard classification, dsc to test several times involves: Paper and board, Fibre optic communications, Optics and optical measurements, Materials for the reinforcement of composites, Products of the textile industry, Leather technology, Plastics, Construction materials, Paints and varnishes, Water quality, Rubber, Metrology and measurement in general, Linear and angular measurements, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry.

(U.S.) Telecommunications Industries Association , dsc to test several times

TIA-455-219-2002 Multifiber Ferrule Endface Ferrule Hole Inside Diameter

CZ-CSN, dsc to test several times

CSN 62 1441-1955
CSN 85 6201-1983 Multi — use hypodermic needles Technical requirements. Testing methods
CSN 85 6201 Za-1989

RU-GOST R, dsc to test several times

GOST ISO 5626-1997 Paper. Determination of folding endurance (Shopper, Lomarge, Kellers-Molena, MIT methods)
GOST 6943.9-1979 Glass textile products. Method of dinamic bending resistance determination
GOST 8978-2003 Artificial leather and films. Methods for determination of stability to repeated flexing
GOST 8978-1975 Artificial leather and films. Methods of determination of stability of repeated flexing
GOST 13868-1974 Chrome upper leather. Method for determination of the flexing resistance of finish
GOST 10060.2-1995 Concrete. Rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 20418-1975 Rubber. Methods for the determination of heat generation compression set and fatigue life for repeated compression
GOST R 8.736-2011 State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST 17443-1980 Rubber. Method for determination fatique life bond of rubber to cord under repeated extention-compression

American National Standards Institute （ANSI), dsc to test several times

ANSI/TIA-455-219-2002 FITP219 Multifiber Ferrule Endface Geometry Measurement

American Society for Testing and Materials (ASTM), dsc to test several times

ASTM E1345-98(2003) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98(2008) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98(2019) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98(2008)e1 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D4273-18 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols

PL-PKN, dsc to test several times

PN O91132-1987 Shoe materials Rubbers and stuffs for soles Determinatin of resistance to multiple bending

European Committee for Standardization (CEN), dsc to test several times

EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times@ enthalpy of reaction and degree of conversion
EN ISO 10360-9:2013 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems
EN ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 5: CMMs Using Multiple-Stylus Probing Systems ISO 10360-5:2000
EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or sc
EN ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)

German Institute for Standardization, dsc to test several times

DIN ISO 15375:2014-10 Medical infusion bottles - Suspension devices for multiple use - Requirements and test methods (ISO 15375:2010)
DIN EN ISO 20567-1:2017-07 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017); German version EN ISO 20567-1:2017
DIN EN ISO 15680:2004-04 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003); German version EN ISO 15680:2003
DIN EN ISO 10360-9:2014-04 Geometrical product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013); German version EN ISO 10360-9:2013

British Standards Institution (BSI), dsc to test several times

BS ISO 20567-4:2023 Paints and varnishes. Determination of stone-chip resistance of coatings - Mobile multi-impact testing on a small testing area
BS EN ISO 10360-9:2013 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). CMMs with multiple probing systems
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
BS EN ISO 15680:2003 Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
BS PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN ISO 21227-2:2006 Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging - Evaluation procedure for multi-impact stone-chipping test
BS EN ISO 10360-5:2020 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) - Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or…

International Organization for Standardization (ISO), dsc to test several times

ISO/TS 11370:2000 Water quality - Determination of selected organic plant-treatment agents - Automated multiple development (AMD) technique
ISO 10360-9:2013 Geometrical product specifications (GPS).Acceptance and reverification tests for coordinate measuring systems (CMS).Part 9: CMMs with multiple probing systems
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems
ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems
ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials

Korean Agency for Technology and Standards (KATS), dsc to test several times

KS I ISO 11370:2007 Water quality－Determination of selected organic plant-treatment agents－Automated multiple development(AMD) technique
KS M ISO 20567-1:2021 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
KS M ISO 20567-1-2011(2016) Paints and varnishes－Determination of stone-chip resistance of coatings－Part 1：Multi-impact testing
KS B ISO 10360-9:2017 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems
KS I ISO 15680-2010(2015) Water quality－Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
KS B ISO 10360-5-2014(2019) Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
KS B ISO 10360-9-2017(2022) Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems
KS B ISO 10360-5:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification test for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
KS B ISO 10360-5:2014 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems

KR-KS, dsc to test several times

KS M ISO 20567-1-2021 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
KS B ISO 10360-9-2017 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems

Association Francaise de Normalisation, dsc to test several times

NF EN ISO 20567-1:2017 Peintures et vernis - Détermination de la résistance des revêtements aux impacts de cailloux - Partie 1 : essais de chocs multiples
NF EN ISO 10360-9:2014 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 9 : MMT avec systèmes de palpage multiples
NF E11-150-9*NF EN ISO 10360-9:2014 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9 : CMMs with multiple probing systems
NF E11-150-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5 : CMMs using single and multiple stylus contacting probing systems.
NF EN ISO 10360-5:2020 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnels (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisan...

American Society of Mechanical Engineers (ASME), dsc to test several times

ASME MFC 12M-2006(R2014) Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements

未注明发布机构, dsc to test several times

DIN EN ISO 10360-5:2001 Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 5: CMMs using multiple stylus probing systems
ISO/TS 11370:2000/Cor 1:2001 Water quality — Determination of selected organic plant-treatment agents — Automated multiple development (AMD) technique

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, dsc to test several times

GB/T 24218.13-2010 Textiles.Test methods for nonwovens.Part 13:Repeated liquid strike-through time
GB/T 16857.9-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems
GB/T 16857.5-2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems

国家市场监督管理总局、中国国家标准化管理委员会, dsc to test several times

GB/T 16857.901-2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system
GB/T 39518-2020 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

Electronic Components, Assemblies and Materials Association, dsc to test several times

ECA 364-93-1997 TP-93 Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

Japanese Industrial Standards Committee (JISC), dsc to test several times

JIS B 7440-9:2017 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 9: CMMs with multiple probing systems
JIS B 7440-5:2013 Geometrical product specifications (GPS).Acceptance and reverification tests for coordinate measuring machines (CMM).Part 5: CMMs using single and multiple stylus contacting probing systems
JIS B 7440-5:2004 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems

Lithuanian Standards Office , dsc to test several times

LST EN ISO 20567-1:2006 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005)
LST EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
LST EN ISO 10360-5:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)

GOSTR, dsc to test several times

GOST R ISO 10360-5-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines using single and multiple stylus contacting systems

Danish Standards Foundation, dsc to test several times

DS/EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
DS/EN ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems

ES-UNE, dsc to test several times

UNE-EN ISO 10360-9:2013 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) (Endorsed by AENOR in January of 2015.)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, dsc to test several times

GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems

AENOR, dsc to test several times

UNE-EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
UNE-EN ISO 10360-5:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)