ZH
RU
ES
Cadmium content in steel
Cadmium content in steel, Total:499 items.
In the international standard classification, Cadmium content in steel involves: Plastics, Non-ferrous metals, Galvanic cells and batteries, Raw materials for rubber and plastics, Water quality, Fertilizers, Air quality, Analytical chemistry, Metalliferous minerals, Coals, Wood-based panels, Paint ingredients, Leather technology, Products of the chemical industry, Wood, sawlogs and sawn timber, Ferrous metals, Iron and steel products, Testing of metals, Ferroalloys, Products of non-ferrous metals, Rubber, Rubber and plastics products, Adhesives, Refractories, Physics. Chemistry, Nuclear energy engineering, Equipment for entertainment, Footwear, Inorganic chemicals, Welding, brazing and soldering, Materials for aerospace construction, Heat recovery. Thermal insulation, Construction materials, Products of the textile industry, Pharmaceutics, Optical equipment, Non-metalliferous minerals, Materials and articles in contact with foodstuffs, Paper and board, Electronic components in general, Pipeline components and pipelines, Paints and varnishes, Fruits. Vegetables, Radiation protection, Wastes, Surface treatment and coating, Sugar. Sugar products. Starch, Reinforced plastics, Food products in general, Electrical wires and cables, Waxes, bituminous materials and other petroleum products, Road engineering, Magnetic materials, Insulating fluids, Environmental testing, Components for electrical equipment, Fuels, Protection against dangerous goods, Construction industry, Buildings.
国家市场监督管理总局、中国国家标准化管理委员会, Cadmium content in steel
- GB/T 38290-2019 Determination of cadmium in plastic materials
- GB/T 23349-2020 Determination of arsenic,cadmium,chromium,lead and mercury contents for fertilizers
- GB/T 40493-2021 Determination of lead, cadmium, chromium and mercury content in the finishing material of wood-based panel
- GB/T 38292-2019 Determination of mercury in plastic materials
- GB/T 38291-2019 Determination of lead in plastic materials
- GB/T 38287-2019 Determination of hexavalent chromium in plastic materials
- GB/T 40304-2021 Determination of content of nonmetallic inclusions in steel—Billet full section method
- GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5: Cadmium，lead and chromium in polymers and electronics and cadmium and lead in metals by AAS，AFS，ICP-OES and ICP-MS
- GB/T 40342-2021 Method for determination of aluminum content in hot dipped zinc-aluminum alloy coating on steel wire
- GB/T 40281-2021 Determination of content of nonmetallic inclusions in steel—Extremum analytical method
- GB/T 17360-2020 Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer
- GB/T 37883-2019 Determination of chromium, cadmium, lead and arsenic in water treatment chemicals—Inductively coupled plasma atomic emission spectrometry
- GB/T 39144-2020 Test method for magnesium content in gallium nitride materials—Secondary ion mass spectrometry
- GB/T 38976-2020 Test method for the oxygen concentration in silicon materials—Inert gas fusion infrared detection method
- GB/T 39506-2020 Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine content
HU-MSZT, Cadmium content in steel
PL-PKN, Cadmium content in steel
- PN H04805-05-1991 Zinc powder Determination of cadmium content
- PN C87070-04-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of cadmium
- PN C81549-16-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of cadmium content
- PN EN 24946-1992 Steel and casi iron Determination ol copper ?onterfl 2.2'-Diquinolyl spectrophotom?tfic method
- PN C87070-03-1992 Fertilizers Test of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of arsenie
- PN C87070-05-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of lead
- PN C87070-06-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of mercury
- PN A86787-1991 Raw materials and products of fish and aquatic invertebrates.Determination of cadmium content flame atomic absorption spectrometric method
Korean Agency for Technology and Standards (KATS), Cadmium content in steel
- KS D 1688-2004 Methods for determination of cadmium in copper
- KS D 1757-2009 Methods for determination of cadmium in zinc metal
- KS D 1828-2009 Method for determination of selenium in steel
- KS D 1827-2009 Methods for determination of zirconium in steel
- KS D 1829-2008 Methods for determination of tellurium in steel
- KS M 1078-2008 Determination of lead and cadmium in Nd-Fe-B magnet
- KS D 1804-2003 Determination of carbon in iron and steel
- KS D 1807-2003 Determination or chromium in iron and steel
- KS D 1811-2003 Methods for determination of nitrogen in iron and steel
- KS D 1876-2003 Determination of titanium in iron and steel
- KS D 1805-2003 Determination of silicon in iron and steel
- KS D 1803-2003 Methods for determination of sulfur in iron and steel
- KS D 1802-2001 Methods for determination of phosphorus in iron and steel
- KS D 1809-2003 Determination of molybdenum in iron and steel
- KS D 1808-2003 Determination of nickel in iron and steel
- KS D 1817-2003 Methods for determination of vanadium in iron and steel
- KS D 1821-2003 Determination of tantalum in iron and steel
- KS D 1810-2003 Methods for determination of copper in iron and steel
- KS D 1812-2003 Determination of tungsten in iron and steel
- KS D 1823-2007 Methods for determination of aluminium in iron and steel
- KS D 1818-2003 Determination of arsenic in iron and steel
- KS D 1824-2003 Determination of magnesium in iron and steel
- KS D 1825-2003 Determination of niobium in iron and steel
- KS D 1826-2003 Methods for determination of antimony in iron and steel
- KS D 1878-2003 Determination of boron in iron and steel
- KS D 1879-2003 Determination of tin in iron and steel
- KS D 1806-2003 Determination of manganese in iron and steel
- KS D 1822-2007 Methods for determination of lead in steel
- KS D 1875-2008 Determination of cobalt in iron and steel
- KS M 1081-2008 Ceramic fuse in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
- KS D ISO 4945-2002(2017) Steel－Determination of nitrogen content－Spectrophotometric method
- KS M 1077-2008 Determination of lead and cadmium in anode N substance for lithium cell
- KS M 1076-2008 Ink in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
- KS D 1946-1995 Determination of molybdenum in tungsten-Molybdenum material for electric lamps and tubes
- KS D 1974-2002 Methods for determination of copper innickel materials for electron tubes
- KS D 1973-2002 Methods for determination of magnesium innickel materials for electron tubes
- KS D 1974-1982 Methods for determination of copper innickel materials for electron tubes
- KS D 1973-1982 Methods for determination of magnesium innickel materials for electron tubes
- KS D ISO 13520:2003 Determination of ferrite content in austenitic stainless steel castings
- KS D ISO 9658-2002(2017) Steel－Determination of aluminium content－Flame atomic absorption spectrometric method
- KS D ISO 13520-2003(2013) Determination of ferrite content in austenitic stainless steel castings
- KS D ISO 13520:2014 Determination of ferrite content in austenitic stainless steel castings
- KS D ISO 9658-2002(2022) Steel－Determination of aluminium content－Flame atomic absorption spectrometric method
- KS M 1991-2015 Determination of phthalates contents in polymer materials
- KS M 1991-2016 Determination of phthalates contents in polymer materials
- KS M 1991-2016(2021) Determination of phthalates contents in polymer materials
- KS D 1979-2002 Methods for determination of titanium innickel materials for electron tubes
- KS D 1979-1983 Methods for determination of titanium innickel materials for electron tubes
- KS D ISO 13899-2:2021 Steel — Determination of Mo, Nb and W contents in alloyed steel —Inductively coupled plasma atomic emission spectrometric method —Part 2: Determination of Nb content
- KS D 0204-2007 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standard diagrams
- KS D 0204-1982 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standard diagrams
- KS D ISO 13899-1:2010 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 1：Determination of Mo content
- KS D ISO 13899-2-2006(2016) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of Nb content
- KS D ISO 13899-3:2006 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of W content
- KS D ISO 11653-2003(2018) Steel－Determination of high cobalt content－Potentiometric titration method after separation by ion exchange
- KS D ISO 13899-3:2021 Steel — Determination of Mo, Nb and W contents in alloyed steel —Inductively coupled plasma atomic emission spectrometric method —Part 3: Determination of W content
- KS D ISO 10720:2003 Steel and iron-Determination of nitrogen content-Thermal conductimetric method after fusion in a current of inert gas
- KS D ISO 13899-2:2006 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of Nb content
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cadmium content in steel
- GB/T 20155-2006 Determination of mercury, cadmium and lead in battery
- GB/T 29612-2013 Determination of cadmium, lead,mercury content for carbon black
- GB/T 20155-2018 Determination of mercury, cadmium and lead content in batteries
- GB/T 36144-2018 Limit on element content of lead, arsenic, cadmium, mercury, fluorine and chlorine in iron ore
- GB/T 31927-2015 Zinc and aluminum based coatings on steel sheets and strips.Determination of lead and cadmium contents.Inductively coupled plasma mass spectrometric method
- GB/T 31926-2015 Zinc and aluminum based coatings on steel sheets and strips.Determination of lead,cadmium and chromium contens.Glow discharge atomic emission spectrometry method
- GB/T 32602-2016 Determination of migratable antimony, barium, cadmium, chromium and lead in toy materials.Graphite furnace atomic absorption spectrometry
- GB 24427-2009 Limitation of mercury,cadmium and lead contents for alkaline and non-alkaline zinc manganese dioxide batteries
- GB/T 17360-1998 Method of quantitative electron probe microanalysis on low contents of Si and Mn in steels
- GB/T 17360-2008 Quantitative analysis method of low content Si and Mn in steel with electron probe microanalysis
- GB/T 13551-1995 Phosphate rock and concentrate--Determination of cadmium oxide content--Flame atomic absorption sepctrometric method
- GB/T 23841-2009 General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
- GB/T 23841-2009"> General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
- GB/T 23841-2009 General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
- GB/T 18932.12-2002 Method for the determination of potassium,sodium,calcium,magnesium,zinc,iron,copper,manganese,chromium,lead,cadmium contents in honey--Atomic absorption spectrometry
American Society for Testing and Materials (ASTM), Cadmium content in steel
- ASTM D3557-02(2007)e1 Standard Test Methods for Cadmium in Water
- ASTM D3557-02 Standard Test Methods for Cadmium in Water
- ASTM D3557-95 Standard Test Methods for Cadmium in Water
- ASTM D3557-90 Standard Test Methods for Cadmium in Water
- ASTM B712-93(1999) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
- ASTM B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
- ASTM B712-93(2012) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
- ASTM C1233-98 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
- ASTM C1233-15 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
- ASTM E45-10 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-10e1 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM D2654-67 Tentative Methods of Test for Amount Of Moisture In Textile Materials
- ASTM E45-97(2002) Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-05e1 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-05 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-11 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-11a Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-05e3 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-13 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM C1233-03 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
- ASTM C1233-09 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
- ASTM E45-18 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-97e2 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-18a Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E45-18a(2023) Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM D5403-93(2002) Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM D5403-93(1998) Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM D5403-93(2007) Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM D3335-85a(2014) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM D3529/D3529M-97(2003)e1 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM D3529/D3529M-97 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM D3529/D3529M-97(2008) Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM C1233-15(2021) Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
- ASTM D3529M-10 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM D5403-93(2013) Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
- ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
- ASTM E1534-93(1998) Standard Test Method for Determination of ASH Content of Particulate Wood Fuels
Japanese Industrial Standards Committee (JISC), Cadmium content in steel
- JIS H 1110:1989 Methods for determination of cadmium in zinc metal
- JIS K 0097:1979 Method for determination of cadmium and lead in stack gas
- JIS G 1234:1981 Methods for determination of tellurium in steel
- JIS G 1236:1992 Method for determination of tantalum in steel
- JIS G 1213:1981 Methods for determination of manganese in iron and steel
- JIS G 1224:1981 Methods for determination of aluminium in iron and steel
- JIS G 1225:1992 Methods for determination of arsenic in iron and steel
- JIS G 1235:1981 Methods for determination of antimony in iron and steel
- JIS G 1228:1997 Iron and steel -- Methods for determination of nitrogen content
- JIS G 1217:1992 Methods for determination of chromium in iron and steel
- JIS Z 3118:2022 Determination of diffusible hydrogen content in steel weld metal
- JIS H 1423:1996 Methods for determination of magnesium in nickel materials for electron tubes
- JIS H 1424:1996 Methods for determination of copper in nickel materials for electron tubes
- JIS H 1425:1996 Methods for determination of iron in nickel materials for electron tubes
- JIS H 1426:1996 Methods for determination of manganese in nickel materials for electron tubes
- JIS H 1427:1996 Methods for determination of carbon in nickel materials for electron tubes
- JIS H 1428:1996 Methods for determination of sulfur in nickel materials for electron tubes
- JIS H 1429:1996 Methods for determination of titanium in nickel materials for electron tubes
- JIS H 1430:1996 Methods for determination of tungsten in nickel materials for electron tubes
- JIS H 1431:1996 Methods for determination of cobalt in nickel materials for electron tubes
- JIS H 1422:1996 Methods for determination of silicon in nickel materials for electron tubes
- JIS Z 2613 AMD 1:2006 General rules for determination of oxygen in metallic materials (Amendment 1)
RU-GOST R, Cadmium content in steel
- GOST EN 14888-2013 Fertilizers and liming materials. Determination of cadmium content
- GOST R ISO 4967-2015 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams
- GOST R ISO 10153-2011 Steel. Determination of boron content. Curcumin spectrophotometric method
- GOST R 57108-2016 Specialized food products. Order to control the content of nanomaterials in food
- GOST R 56796-2015 Polymer composites. Prepregs. Method for determination of constituent content of prepreg
- GOST R ISO 13899-2-2009 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of Nb content
- GOST R 56789-2015 Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
- GOST R 50109-1992 Nonmetallic materials. Test method for mass loss and content of volatile condensable materials in a vacuum-thermal environment
Danish Standards Foundation, Cadmium content in steel
- DS/EN 14888:2005 Fertilizers and liming materials - Determination of cadmium content
- DS/ENV 1122:1995 Determination of cadmium in plastics with the method of the wet decomposition
- DS/EN 10179:1989 Chemical analysis of ferrous materials. Determination of nitrogen (trace amount) in steels. Spectrophotometric method
- DS/EN 10200:1993 Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
- DS/EN 10178:1989 Chemical analysis of ferrous materials. Determination of niobium in steels. Spectrophotometric method
- DS/EN 24946:1991 Steel and cast iron. Determination of copper content. 2,2'. Diquinolyl spectrophotometric method
- DS/EN 10181:1989 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
- DS/EN 10177:1989 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method
- DS/EN 29 658:1993 Steel - Determination of aluminium content - Flame atomic absorption spectrometric method
- DS/ISO 9658:1993 Steel - Determination of aluminium content - Flame atomic absorption spectrometric method
- DS/EN 10036:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
- DS/EN 16117-1:2011 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
- DS/EN 16117-2:2013 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
- DS/EN 10252:1998 Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
Lithuanian Standards Office , Cadmium content in steel
- LST EN 14888-2006 Fertilizers and liming materials - Determination of cadmium content
- LST EN 24946+AC-2000 Determination of copper content in steel and cast iron
- LST EN 16117-1-2012 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
- LST EN 16117-2-2013 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
- LST EN 10252-2000 Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
German Institute for Standardization, Cadmium content in steel
- DIN EN 14888:2005-10 Fertilizers and liming materials - Determination of cadmium content; German version EN 14888:2005
- DIN 53770-6:1977 Testing of pigments; determination of matter soluble in hydrochloric acid, cadmium content
- DIN EN 10178:1990 Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method; german version EN 10178:1989
- DIN 53770-6:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 6: Cadmium content
- DIN EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
- DIN 51926:2009 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
- DIN 51926:2016 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
- DIN EN 10212:1995 Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method; German version EN 10212:1995
- DIN 2440:1978 Steel Tubes; Medium-Weight Suitable for Screwing
- DIN 52161-7:2014-01 Testing of wood preservatives - Detection of wood preservatives in wood - Part 7: Determination of the content of copper bearing wood preservatives
- DIN EN 10036:1990 Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; German version EN 10036:1989
- DIN 51926:2016-08 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
- DIN EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
- DIN CEN/TS 17308:2019-06*DIN SPEC 3758:2019-06 Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content; German version CEN/TS 17308:2019
- DIN EN 16682:2017-05 Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage; German version EN 16682:2017
- DIN EN 10200:2013 Chemical analysis of ferrous materials.Determination of boron in steels.Spectrophotometric method; German version EN 10200:2012
- DIN EN 10071:2013 Chemical analysis of ferrous materials.Determination of manganese in steels and irons.Electrometric titration method; German version EN 10071:2012
- DIN EN 16117-1:2011-12 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %; German version EN 16117-1:2011
- DIN EN 16117-2:2013-02 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %; German version EN 16117-2:2012
- DIN EN 10252:1997-05 Magnetic materials - Methods of measurement of magnetic properties of electrical steel sheet and strip at medium frequencies; German version EN 10252:1997
- DIN EN ISO 13520:2019 Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2015)
- DIN EN 29658:1992-07 Determination of aluminium content of steel by flame atomic absorption spectrometry (ISO 9658:1990); german version EN 29658:1991
- DIN EN ISO 13520:2023-07 Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2023); German version EN ISO 13520:2023
- DIN EN 24937:1992-11 Determination of chromium content of steel and iron by potentiometric or visual method (ISO 4937:1986); german version EN 24937:1990
- DIN EN 10136:1990 Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method; German version EN 10136:1989
- DIN EN ISO 10720:2007-06 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997); German version EN ISO 10720:2007
- DIN 51933:2012-12 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
AENOR, Cadmium content in steel
- UNE-EN 14888:2006 Fertilizers and liming materials - Determination of cadmium content
- UNE 7331:1975 DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.
- UNE-EN 10252:1997 MAGNETIC MATERIALS. METHODS FOR MEASUREMENT OF MAGNETIC PROPERTIES OF MAGNETIC STEEL SHEET AND STRIP AT MEDIUM FREQUENCIES.
- UNE-EN 16117-1:2012 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
- UNE-EN 16117-2:2014 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
Professional Standard - Ferrous Metallurgy, Cadmium content in steel
- YB/T 4383-2014 Iron ore limit element content of lead, arsenic, cadmium, mercury, fluorine and chlorine
- YB/T 4217.3-2010 Determination of lead and cadmium content in coatings of hot-dip galvanized (aluminum-zinc) steel sheets by inductively coupled plasma emission spectrometry
CU-NC, Cadmium content in steel
- NC 04-60-1984 Materials Testing. Determination of Chrome and Nickel Content in Steels. Photometric Method
- NC 04-20-1968 Determination of total carbon in ferrous materials
- NC 04-21-1968 Volumetric determination of manganese contents in steel and cast irons
- NC 04-26-1969 Determination of nickel in steels and cast iron
- NC 04-25-1969 Determination of cromium in steels and cast iron
- NC 04-22-1968 Gravimetric determinacion of total silicon in steels and cast irons
- NC 04-27-1969 Photometric determination of total silicon in steels and cast irons
Professional Standard - Commodity Inspection, Cadmium content in steel
- SN/T 1841-2006 Determination of cadmium in toy materials. Flame atomic absorption spectrometry
- SN/T 1325.2-2003 Determination of cadmium content of barites for import and export-Atomic absorption spectrometric method
- SN/T 2267-2009 Determination of cadmium in rubber and rubber products.Atomic absorption spectrometry
- SN/T 3958-2014 Determination of total arsenic, lead, cadmium, copper content in plant extracts for import and export
- SN/T 2680-2010 Determination of arsenic,mercury,cadmium,lead,bismuth in iron ores.Atomic fluorescence spectrometric method
- SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export. Wet decomposition method
- SN/T 0313-2014 Determination of molybdenum in steel for import and export.8-hydroxyquinoline gravimetric after separation with thioacetamide
- SN/T 3368-2012 Determination of phosphorus content in carbon steel and low-middle alloy steel.Phosphomolybdate blue spectrophotometric method
- SN/T 1653-2005 Determination of lead、cadmium content in leather and leather products for import and export--Fire atomic absorption spectrometric method
- SN/T 2484-2010 Determination of As,Ba,Bi,Cd,Cr,Hg,Pb,Sb content in essential oil-Inductively coupled plasma-mass spectrometry
- SN/T 2056-2008 Determination of lead,arsenic,cadmium,copper,iron content in tea for import and export.Inductively coupled plasma atomic emission spectrometric method
BE-NBN, Cadmium content in steel
International Organization for Standardization (ISO), Cadmium content in steel
- ISO 15238:2003 Solid mineral fuels - Determination of total cadmium content of coal
- ISO/CD 15238:1976 Solid mineral fuels — Determination of total cadmium content of coal
- ISO 18664:2015 Traditional Chinese Medicine - Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine
- ISO 3763:1976 Wrought steels; Macroscopic methods for assessing the content of non-metallic inclusions
- ISO 13520:2002 Determination of ferrite content in austenitic stainless steel castings
- ISO 13520:2023 Determination of ferrite content in austenitic stainless steel castings
- ISO 13520:2015 Determination of ferrite content in austenitic stainless steel castings
- ISO/TS 13899-1:2004 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content
- ISO/TS 13899-3:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content
- ISO 13899-2:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content
British Standards Institution (BSI), Cadmium content in steel
- BS ISO 15238:2003 Solid mineral fuels - Determination of total cadmium content of coal
- BS ISO 15238:2016 Solid mineral fuels. Determination of total cadmium content of coal
- BS EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas
- BS EN 10212:1996 Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method
- BS EN 10212:1996(1999) Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method
- BS EN 10200:2012 Chemical analysis of ferrous materials. Determination of boron in steels. Spectrophotometric method
- BS EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination
- BS ISO 18664:2015 Traditional Chinese Medicine. Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine
- BS EN 12498:2005 Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract
- BS EN 10181:2019 Chemical Analysis of Ferrous Materials Determination of Lead in Steels Flame Atomic Absorption Spectrometric Method
- DD ISO/TS 13899-3:2005 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Determination of W content
- BS ISO 13520:2015 Determination of ferrite content in austenitic stainless steel castings
- BS EN 12014-7:1998 Foodstuffs - Determination of nitrate and/or nitrite content - Continuous flow method for the determination of nitrate content of vegetables and vegetable products after cadmium reduction
- BS EN 10036:1991 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
- BS EN 10036:1991(1999) Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
- BS DD ISO/TS 13899-3:2006 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of W content
- BS ISO 13899-2:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of Nb Content
- BS 5710:1979 Methods for macroscopic assessment of the content of non-metallic inclusions in wrought steels
- BS EN 10136:1991 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
- BS EN 10252:1997 Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
- BS EN 10211:2013 Chemical analysis of ferrous materials. Determination of titanium in steels and cast irons. Flame atomic absorption spectrometric method
- BS EN IEC 60754-3:2019 Test on gases evolved during combustion of materials from cables - Measurement of low level of halogen content by ion chromatography
- 19/30383737 DC BS ISO 9647. Steels. Determination of vanadium content. Flame atomic absorption spectrometric method (FAAS)
ZA-SANS, Cadmium content in steel
CZ-CSN, Cadmium content in steel
- CSN ON 42 0529-1968
- CSN 65 6243-1961 Contens of matorials ínsoluble in freezíng ixture F 12
- CSN EN 10 036-1993 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
- CSN EN 10 184-1993 Chemical analysis of ferrous materials. Determination of phosphorus in steels and irons. Spectrophotometric method
- CSN EN 10 178-1993 Chemical analysis of ferrous materials. Determination of niobium in steels. Spectrophotometric method
- CSN 42 0540-1988 Chemical analysis of technical iron. Determination of the oxygen content in steel
- CSN 42 0529-1988 Chemical analysis of technical iron. Determination of the hydrogen content in steel
- CSN 73 1402-1987 Design of light gauge cold-formed profiles in steel structures
- CSN EN 10 181-1993 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
- CSN EN 10188-1994 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method
- CSN EN 10136-1994 Chemical analysis of ferrous materials. Determination of nickel in steel and irons. Flame atomic absorption spectrometric method
- CSN 49 0103-1979 Wood. Determination of moisture content at physical and mechanical testing
- CSN EN 10 177-1993 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method
- CSN EN 10 179-1993 Chemical analysis of ferrous metals — Determination of nitrogen (trace amounts) in steels — Spectrophotometric method
AT-ON, Cadmium content in steel
- ONORM DIN 10338-1992 Determination of nitrate and nitrite contents of cheese - Method by cadmium reduction
Indonesia Standards, Cadmium content in steel
- SNI 06-7129-2005 Test methods of chromium (IV) content in leather by spectrophotometers
VE-FONDONORMA, Cadmium content in steel
ES-AENOR, Cadmium content in steel
RO-ASRO, Cadmium content in steel
European Committee for Standardization (CEN), Cadmium content in steel
- EN 10036:1989 Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen
- EN 10212:1995 Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method
- EN 10071:1989 Chemical Analysis of Ferrous Materials Determination of Manganese in Steels and Irons Electrometric Titration Method
- EN 24946:1990 Steel and cast iron ?Determination of copper content 2,2' diquinolyl spectrophotometric method
- EN 10178:1989 Chemical Analysis of Ferrous Materials Determination of Niobin in Steels Spectrophotometric Method
- EN 10179:1989 Chemical Analysis of Ferrous Materials - Determination of Nitrogen (Trace Mounts) in Steel Spectrophotometric Method
- EN 10200:2012 Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method
- EN 10181:1989 Chemical Analysis of Ferrous Materials Determination of Lead in Steels Flame Atomic Absorption Spectrometric Method
- EN ISO 13520:2023 Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2023)
- EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
- CEN/TS 17308:2019 Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
- CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
- EN 12014-7:1998 Foodstuffs - Determination of nitrate and/or nitrite content - Part 7: Continuous flow method for the determination of nitrate content of vegetables and vegetable products after cadmium reduction
- EN 16117-2:2012 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
- EN 12498:2005 Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract
IT-UNI, Cadmium content in steel
Group Standards of the People's Republic of China, Cadmium content in steel
- T/CSTM 00023-2017 Determination of cadmium content in steel and alloy - Graphite furnace atomic absorption spectrometry
- T/YNIA 019-2023 Bio-based carbon test of nonwovens
- T/NXCL 025-2023 Method for chemical analysis of beryllium — Determination of boron,cobalt,silver,lead,cadmium and lithium contents—Inductively coupled plasma mass spectrometry
- T/CSTM 00451-2021 Determination of polychlorinated naphthalenes content in coatings and related materials
- T/CSTM 00452-2021 Determination of hexabromocyclododecane content in coatings and related materials
- T/CSTM 00450-2021 Determination of short chain chlorinated paraffins content in coatings and related materials
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cadmium content in steel
- GB/T 34175-2017 Determination of sulfur in refractory products
- GB/T 22788-2016 Determination of total lead content in material of toys and children’s products
Association Francaise de Normalisation, Cadmium content in steel
- NF A04-107:1980 Iron and steel. Micrographic method of determination of the non metallic inclusion content of unalloyed wire rod.
- NF EN ISO 10545-15:2021 Carreaux et dalles céramiques - Partie 15 : détermination de la teneur en plomb et en cadmium relargués par les carreaux
- NF EN 10188:1989 Analyse chimique des matériaux sidérurgiques - Dosage du chrome dans les aciers et les fontes - Méthode par spectrométrie d'absorption atomique dans la flamme.
- NF A06-301:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen.
- NF A08-337-1*NF EN 16117-1:2011 Copper and copper alloys - Determination of copper content - Part 1 : electrolytic determination of copper in materials with copper content less than 99,85 %.
- NF A32-059*NF EN ISO 13520:2019 Determination of ferrite content in austenitic stainless steel castings
- XP E59-003*XP CEN/TS 17308:2019 Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
- NF EN 16117-2:2013 Cuivre et alliages de cuivre - Détermination de la teneur en cuivre - Partie 2 : détermination par électrogravimétrie du cuivre dans les matériaux ayant une teneur en cuivre supérieure à 99,80 %
- NF X80-029*NF EN 16682:2017 Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
- NF A04-105:1986 Iron and steel. Methods of determination of the non metallic inclusion content of wrought steels. Part 1 : macroscopic methods.
- NF C28-911*NF EN 10252:1997 Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies.
- NF EN 10252:1997 Matériaux magnétiques - Méthodes de mesure des propriétés magnétiques à fréquences moyennes des tôles et feuillards magnétiques en acier
- NF EN 12014-7:1998 Produits alimentaires - Détermination de la teneur en nitrates et/ou en nitrites - Partie 7 : détermination de la teneur en nitrates par flux continu dans les légumes et les produits à base de légumes, après réduction au cadmium.
- NF A08-313*NF EN 10211:2014 Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method
- XP P94-047:1998 Sols : reconnaissance et essais - Détermination de la teneur pondérale en matières organiques d'un matériau - Méthode par calcination.
- NF X46-020:2008 Asbestos survey - Survey of materials and products containing asbestos in buildings - Mission and methodology.
- NF X46-020:2002 Asbestos survey - Survey of materials and products containing asbestos in buildings - Mission and methodology.
Professional Standard - Chemical Industry, Cadmium content in steel
- HG/T 4326-2012 Reclaimed water.Determination of nickel,copper,zinc,cadmium and lead.Atomic absorption spectromic method
- HG/T 5543~5545-2019 Determination of Cobalt in Waste Chemicals, Determination of Cyanide Content in Cyanide-Containing Waste Liquid and Determination of Nickel Content in Lithium-ion Battery Material Waste (2019)
Guangxi Provincial Standard of the People's Republic of China, Cadmium content in steel
- DB45/T 1544-2017 Rapid determination of cadmium, lead, copper and arsenic in soil by anodic stripping voltammetry
- DB45/T 1545-2017 Rapid determination of cadmium, lead, copper and arsenic in water quality by anodic stripping voltammetry
- DB45/T 1546-2017 Rapid determination of cadmium, lead, copper and arsenic in grains by anodic stripping voltammetry
- DB45/T 2109-2019 Volumetric method for determination of selenium content in copper indium gallium selenide solar photovoltaic cell target
NL-NEN, Cadmium content in steel
- NEN 6221-1980 Chemical analysis of iron and steel Gravimetric determination of the silicon content in iron and steel (perchloric acid method)
- NEN 6211-1978 Chemical analysis of iron and steel - Gravimetric determination of the nickel content in iron and steel
- NEN 6213-1978 Chemical analysis of iron and steel - Gravimetric determination of the total content of niobium and tantalum in steel
- NEN 6205-1978 Chemical analysis of iron and steel - Volumetric determination of the arsenic content in iron, mild and alloy steel
- NEN 6222-1981 Chemical analysis of iron and steel Photometric determination of the titanium content in iron and steel
- NEN 6209-1978 Chemical analysis of iron and steel - Potentiometric titration of the manganese content in ferromanganese
- NEN 6208-1978 Chemical analysis of iron and steel - Photometric determination of the cobalt content in iron and steel
- NEN 6216-1978 Chemical analysis of iron and steel Titrimetric determination of the sulfur content in iron and steel
- NEN 6215-1978 Chemical analysis of iron and steel Titrimetric determination of the vanadium content in iron and steel
- NEN 6220-1983 Chemical analysis of iron and steel Photometric determination of the nickel content in iron and steel
- NEN 6210-1978 Chemical analysis of iron and steel - Photometric determinatlon of the molybdenum content in iron and steel
- NEN 6219-1981 Chemical analysis of iron and steel Photometric determination of the arsenic content in iron and mild steel
- NEN 6207-1978 Chemical analysis of iron and steel - Determination of the graphite content in iron
- NEN 6212-1978 Chemical analysis of iron and steel - Gravimetric determination of the silicon content in iron, mild and alloy steel (sulfuric acid method)
- NEN 6227-1983 Chemical analysis of iron and steel Determination of the copper content in iron and steel by atomic absorption spectrometry
- NEN 6217-1980 Chemical analysis of ir on and steel Titrimetric determination of the phosphorus content in iron, non-alloy and alloy steel
- NEN 6206-1978 Chemical analysis of iron and steel - Volumetric determination of the carbon content in iron and steel, after combustion in a high frequency furnace or a resistance furnace
ACI - American Concrete Institute, Cadmium content in steel
(U.S.) Ford Automotive Standards, Cadmium content in steel
YU-JUS, Cadmium content in steel
- JUS C.A3.013-1987 Determination ofcontent of non-metallic inclusions in stee/. Micrographic method using standarddiagrams
- JUS B.D8.242-1991 Refractories. Determination of ashes content in natural graphite. Gravimetric method
- JUS B.D8.244-1991 Refractories. Determination of slika content in ashes ofnatural graphite. Gravimetric method
Sichuan Provincial Standard of the People's Republic of China, Cadmium content in steel
Jilin Provincial Standard of the People's Republic of China, Cadmium content in steel
- DB22/T 1688-2012 Determination of Arsenic, Cadmium, Lead and Chromium in Fertilizers by Inductively Coupled Plasma Spectrometry
- DB22/T 1687-2012 Determination of Arsenic, Cadmium, Lead, Chromium and Mercury in Fertilizers by Inductively Coupled Plasma Mass Spectrometry
- DB22/T 1694-2012 Determination of cobalt, copper, iron, lead, zinc, calcium, magnesium, manganese, cadmium, chromium, sodium in nickel chloride by inductively coupled plasma spectrometry
- DB22/T 1693-2012 Determination of cobalt, copper, iron, lead, zinc, calcium, magnesium, manganese, cadmium, chromium, sodium in nickel sulfate by inductively coupled plasma spectrometry
Yunnan Provincial Standard of the People's Republic of China, Cadmium content in steel
- DB53/T 550-2014 Determination of lead, arsenic, cadmium, iron, manganese in calcium hydrogen phosphate energy dispersive X-ray fluorescence spectrometry
- DB53/T 394-2012 Determination of lead, cadmium, arsenic, chromium and mercury in eucalyptus oil by inductively coupled plasma mass spectrometry
- DB53/T 586-2014 Determination of Arsenic, Lead, Cadmium, Nickel, Chromium in Organic Fertilizers by Inductively Coupled Plasma Mass Spectrometry
Society of Automotive Engineers (SAE), Cadmium content in steel
- SAE AMS5062H-2009 Steel, Low Carbon, Bars, Forgings, Tubing, Sheet, Strip, and Plate, 0.25 Carbon, Maximum
PT-IPQ, Cadmium content in steel
API - American Petroleum Institute, Cadmium content in steel
- API PSD 2202-1975 DISMANTLING AND DISPOSING OF STEEL FROM TANKS WHICH HAVE CONTAINED LEADED GASOLINE
- API PSD 2202-1964 DISMANTLING AND DISPOSING OF STEEL FROM TANKS WHICH HAVE CONTAINED LEADED GASOLINE (FIRST EDITION)
IN-BIS, Cadmium content in steel
SE-SIS, Cadmium content in steel
Malaysia Standards, Cadmium content in steel
Standard Association of Australia （SAA）, Cadmium content in steel
- AS 2197:1978 Method for the micrographic assessment of the non-metallic inclusion content in wrought steel
- AS 5101.3.3:2008 Methods for preparation and testing of stabilized materials - Cement content of cement stabilized materials
CEN - European Committee for Standardization, Cadmium content in steel
- EN 12498:2018 Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium@ chromium and lead in an aqueous extract
- EN ISO 13520:2019 Determination of ferrite content in austenitic stainless steel castings
- PD CEN/TS 17308:2019 Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
ES-UNE, Cadmium content in steel
- UNE-EN ISO 13520:2019 Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2015)
- UNE-EN 16682:2018 Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
AR-IRAM, Cadmium content in steel
WRC - Welding Research Council, Cadmium content in steel
- BULLETIN 318-1986 FACTORS INFLUENCING THE MEASUREMENT OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL USING MAGNETIC INSTRUMENTS ; MEASUREMENTS OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL GI
Professional Standard - Non-ferrous Metal, Cadmium content in steel
- YS/T 735-2010 Determination of the ash content in carbon glue used for aluminium production
工业和信息化部, Cadmium content in steel
- HG/T 5545-2019 Determination of nickel content in lithium-ion battery material waste
Anhui Provincial Standard of the People's Republic of China, Cadmium content in steel
- DB34/T 3086-2018 Determination of hexavalent chromium content in steel plate coating spectrophotometric method
KR-KS, Cadmium content in steel
- KS D ISO 13899-2-2021 Steel — Determination of Mo, Nb and W contents in alloyed steel —Inductively coupled plasma atomic emission spectrometric method —Part 2: Determination of Nb content
- KS D ISO 13899-3-2021 Steel — Determination of Mo, Nb and W contents in alloyed steel —Inductively coupled plasma atomic emission spectrometric method —Part 3: Determination of W content
Fujian Provincial Standard of the People's Republic of China, Cadmium content in steel
- DB35/T 2105-2022 Specification for calculation of halogen content in wire and cable sheath materials
国家质量监督检验检疫总局, Cadmium content in steel
- SN/T 4448-2016 Determination of isothiazolinone antifungal agent content in leather materials
Professional Standard - Machinery, Cadmium content in steel
- JB/T 4107.2-1999 Chemical analyse method for electrical contact materials.Determination of copper content in the copper tungsten ( iodimetry)
- JB/T 4107.4-1999 Chemical analyse method for electrical contact materials.Determination of silver content in the silver - tungsten ( iodimetry)
Professional Standard - Aviation, Cadmium content in steel
- HB/Z 5109.7-2001 Analysis method for passivation solution Determination of sodium sulfate in zinc plating, cadmium plating nitric acid passivation solution
Professional Standard - Electron, Cadmium content in steel
- SJ/T 11011-2015 Test method for lead, bismuth, zinc, cadmium, iron, magnesium, aluminium, tin, antimony and phosphorus in pure silver brazing for electron device by ICP-AES
Professional Standard - Agriculture, Cadmium content in steel
- SN/T 5054-2018 Determination of zinc, cadmium, lead, manganese, iron, magnesium, calcium and copper in antimony concentrates by inductively coupled plasma emission spectrometry
- NY/T 4313-2023 Determination of Arsenic, Cadmium, Lead, Chromium, Copper and Zinc in Biogas Slurry Microwave Digestion-Inductively Coupled Plasma Mass Spectrometry