ZH
RU
ES

Nitrogen zirconium adsorption

Nitrogen zirconium adsorption, Total:318 items.

In the international standard classification, Nitrogen zirconium adsorption involves: Wastes, Electronic tubes, Products of the chemical industry, Non-ferrous metals, Powder metallurgy, Mining and quarrying, Environmental protection, Analytical chemistry, Shipbuilding and marine structures in general, Mechanical testing, Particle size analysis. Sieving, Raw materials for rubber and plastics, Testing of metals, Metalliferous minerals, Inorganic chemicals, Air quality, Chipless working equipment, Water quality, Measurement of volume, mass, density, viscosity, Physics. Chemistry, Construction materials, Test conditions and procedures in general, Ceramics, Spices and condiments. Food additives, Protective equipment, Compressors and pneumatic machines, Fuels, Wind turbine systems and other alternative sources of energy, Products of the textile industry, Vocabularies, Railway rolling stock, Coals, Linear and angular measurements, Ferrous metals, Installations in buildings, Natural gas, Rotating machinery, Medical equipment, Nuclear energy engineering, Power stations in general, Ferroalloys.

Group Standards of the People's Republic of China, Nitrogen zirconium adsorption

T/SHDSGY 038-2022 Technical specification for activated carbon adsorption nitrogen desorption condensation recovery
T/QGCML 1392-2023 Pressure swing adsorption nitrogen production equipment
T/ZZB 2799-2022 Pressure swing adsorption（PSA） nitrogen plants
T/CAEPI 62-2023 Technical requirement for solvent recovery unit by granular activated carbon adsorption - nitrogen desorption
T/CASMES 181-2023 Intelligent PSA nitrogen production equipment
T/CASME 485-2023 Energy saving pressure swing adsorption nitrogen production equipment
T/QGCML 1058-2023 Twin-tower pressure swing adsorption (PSA) nitrogen production equipment
T/CASME 648-2023 Energy saving pressure swing adsorption nitrogen production equipment
T/CHES 15-2017 Determination of Total Nitrogen in Water Quality Gas Phase Molecular Absorption Spectrometry
T/CHES 12-2017 Water Quality Determination of Ammonia Nitrogen Gas Phase Molecular Absorption Spectrometry
T/CHES 13-2017 Water Quality Determination of Nitrate Nitrogen Gas Phase Molecular Absorption Spectrometry
T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method
T/CHES 14-2017 Water Quality Determination of Nitrite Nitrogen Gas Phase Molecular Absorption Spectrometry
T/LNEMA 005-2022 Determination of Monochloroethane in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Methanol - Gas Chromatography
T/NXCL 023-2023 Determination of hydrogen and nitrogen in Beryllium— Inert gas fusion infrared absorption/ thermal conductivity method
T/CI 108-2022 Adsorption compressed air dryers for compression thermal regeneration
T/ZZB 2743-2022 Heat of compression regeneration adsorption compressed air dryers
T/ZZB 0582-2018 Blower purge adsorption dryer for compressed air
T/CIECCPA 050-2023 Technical and equipment requirements for hydrolysis adsorption desulphurization of blast furnace gas
T/CPCIF 0175-2021 Technical specifications of resin adsorption method for industrial organic waste gas treatment project
T/CSEE 0284-2022 Technical conditions of hydrogen-cooled generator adsorption regenerative gas dryer
T/QGCML 1196-2023 99.5% purity pressure swing adsorption oxygen production and oxygen purification integrated system

Professional Standard - Electron, Nitrogen zirconium adsorption

SJ 20670-1998 Specification for Zr-Al getters
SJ 3235-1989 Ribbon getter made of Zirconium and Aluminium
SJ 20446-1994 Specification for Zr-V-Fe getter
SJ/T 10272-1991 General specification for nitrogen purifier in catalyst absorption
SJ/T 10273-1991 General specification for hydrogen purifier in catalyst absorption

机械工业部, Nitrogen zirconium adsorption

JB/T 6427-1992 Adsorption oxygen and nitrogen production equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nitrogen zirconium adsorption

GB/T 6452-1986 Zirconium-aluminium alloy powders for getter
GB/T 9506.5-1988 Test method for nitrogen-released and gas-absorbed dynamic curve of nitrogen-doped getter
GB/T 10505.3-1989 Determination of static absorbed ethene and nitrogen for molecular sieve 3A
GB 10505.3-1989 3A Molecular Sieve Static Ethylene and Nitrogen Adsorption Determination Method
GB/T 6453-1986 Zirconium-aluminium alloy combined strips for getter
GB/T 6625-1986 Test methods for nitrogen content of nitrogen-doped getter
GB/T 6454-1986 Rings and tablets of zirconium-aluminium alloy for getter
GB/T 13390-2008 Metallic powder.Determination of the specific surface area.Method of nitrogen adsorption
GB/T 13390-1992 Metallic powder--Determination of the specific surface area--Method of nitrogen adsorption
GB/T 10322.8-2009 Iron ores.Single-point determination of specific surface area.Nitrogen adsorption method
GB/T 10722-2003 Carbon black-Determination of total and external surface area by nitrogen adsorption
GB/T 10722-2014 Carbon black.Determination of total and external surface area.Nitrogen adsorption test method
GB/T 9506.6-1988 Test method for barium film distribution of nitrogen-doped getter
GB/T 20914.2-2007 Stamping dies Gas springs Part 2: Specification of accessories
GB/T 2596-1981 Tungsten powder and tungsten carbide powder--Determination of specific surface product(average graininess)--Simplified nitrogen absorption method
GB 223.30-1984 Methods for chemical analysis of iron,steel and alloy--The arsenazo 3 photometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 42857-2023 Safety requirements for hydrogen purification system by pressure swing adsorption
GB/T 21650.3-2011 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 3:Analysis of micropores by gas adsorption
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 21650.2-2008 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 2: Analysis of mesopores and macropores by gas adsorption
GB/T 17665-1999 Test method of wooden granular activated carbon adsorption to CCI4 vapor
GB/T 6609.35-2023 Methods of chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method
GB/T 6609.35-2009 Chemical analysis methods and determination of physical performance of alumina-Part 35: Determination of specific surface area by nitrogen adsorption
GB/T 16781.1-2008 Natural gas.Determination of mercury.Part 1: Sampling of mercury by chemisorption on iodine

Professional Standard - Non-ferrous Metal, Nitrogen zirconium adsorption

YS/T 529-2009 Zironium-Aluminum alloy powder for getter
YS/T 529-2006 Zirconium aluminum alloy powder for breather
YS/T 530-2006 Zirconium-aluminum alloy composite strip for air intake
YS/T 531-2006 Zirconium alloy rings and sheets for suction

Indonesia Standards, Nitrogen zirconium adsorption

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption

Professional Standard - Machinery, Nitrogen zirconium adsorption

JB/T 6427-2001 PSA oxugen and nitrogen plants
JB/T 6427-2015 Pressure swing adsorption oxygen and nitrogen production equipment
JB/T 53025-1999 Product quality classification of adsorption oxygen and nitrogen production equipment
JB/T 10532-2017 Adsorption compressed air dryers for general use
JB/T 10532-2005 Adsorption compressed air dryers for general use

Professional Standard-Ships, Nitrogen zirconium adsorption

CB/T 4242-2013 PSA nitrogen producting device for ship

American Society for Testing and Materials (ASTM), Nitrogen zirconium adsorption

ASTM UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM UOP821-81 Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer
ASTM D6556-09 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-21 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D1993-03(2008) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1993-03 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1993-03(2013) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D4222-03 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-98 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM C1069-86(2004)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D6556-10 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-04 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM UOP874-88 Pore Size Distribution of Porous Substances by Nitrogen Adsoprtion Using a Quantachrome Analyzer
ASTM D6556-19a Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-19 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-17 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM D5160-95(1998) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
ASTM D5160-95(2019) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
ASTM C1069-09 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D5160-95(2014) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
ASTM D1993-91(1997) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM C1069-86(1997)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D1993-18 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D5604-21 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D1993-22 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM C1069-09(2014) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D5604-96(2012) Standard Test Methods for Precipitated Silicamdash;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D6556-16 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D5604-96(2006) Standard Test Methods for Precipitated Silica-Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D5604-96(2001) Standard Test Methods for Precipitated Silica8212;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D5604-96 Standard Test Methods for Precipitated Silica8212;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D5604-96(2017) Standard Test Methods for Precipitated Silica8212;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D3686-08 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-95(2001)e1 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-20 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-13 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D7569/D7569M-10(2015)e1 Standard Practice for Determination of Gas Content of Coal—Direct Desorption Method
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

Taiwan Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

CNS 12706-1990 Method of Test for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Nitrogen zirconium adsorption

GB/T 13747.22-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 22：Determination of oxygen and nitrogen contents—Inert gas fusion-infrared absorption and thermal conductivity method
GB/T 13747.21-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 21：Determination of hydrogen content—Inert gas fusion-infrared absorption or thermal conductivity method
GB/T 34320-2017 Specification for the use of molecular sieves in SF6 electrical apparatus
GB/T 4702.17-2016 Chromium metal─Determination of oxygen, nitrogen and hydrogen content─Inert gas fusion thermal infrared detection method and conductivity method
GB/T 16781.1-2017 Natural gas—Determination of mercury—Part 1: Sampling of mercury by chemisorption on iodine

British Standards Institution (BSI), Nitrogen zirconium adsorption

BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
BS ISO 4652:2020 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
20/30375934 DC BS ISO 4652. Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS ISO 8008:2006 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
BS ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Analysis of micropores by gas adsorption
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
BS ISO 15901-2:2006(2007) Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS ISO 15901-2:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS EN 13203-6:2018 Gas-fired domestic appliances producing hot water. Assessment of energy consumption of adsorption and absorption heat pumps
19/30358816 DC BS ISO 22252. Manned submersibles. Breathing air supply and carbon dioxide adsorption. Design requirements
BS ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of nanopores by gas adsorption
BS ISO 22252:2020 Manned submersibles. Breathing air supply and CO2 adsorption systems. Performance requirements and recommendations
BS EN 13203-6:2022 Tracked Changes. Gas-fired domestic appliances producing hot water. Assessment of energy consumption of adsorption and absorption heat pumps
BS EN ISO 6978-1:2003 Natural gas - Determination of mercury - Sampling of mercury by chemisorption on iodine
BS EN ISO 6978-1:2005 Natural gas. Determination of mercury. Sampling of mercury by chemisorption on iodine
20/30410823 DC BS ISO 15901-2. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Part 2. Analysis of nanopores by gas adsorption
BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling
BS EN 1076:1997 Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods
BS EN 1076:2010 Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods

Association Francaise de Normalisation, Nitrogen zirconium adsorption

NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF T45-105:2020 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
NF ISO 4652:2020 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de la surface spécifique par méthodes par adsorption d'azote - Modes opératoires à un point de mesure
NF S76-036/A1*NF EN 145/A1:2000 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking
NF S76-036*NF EN 145:1997 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking.
NF ISO 18852:2015 Ingrédients de mélange du caoutchouc - Détermination de la surface par adsorption d'azote (NSA) et de la surface par épaisseur statistique (STSA) par méthode multipoints
NF X43-267:2014 Air des lieux de travail - Prélèvement et analyse de gaz et vapeurs organiques - Prélèvement par pompage sur tube à adsorption et désorption au solvant
NF EN 145:1997 Appareils de protection respiratoire - Appareils de protection respiratoire isolants autonomes à circuit fermé, du type à oxygène comprimé ou à oxygène-azote comprimé - Exigences, essais, marquage
NF EN 145/A1:2000 Appareils de protection respiratoire - Appareils de protection respiratoire isolants autonomes à circuit fermé, du type à oxygène comprimé ou à oxygène-azote comprimé - Exigences, essais, marquage
NF D35-350-6*NF EN 13203-6:2018 Gas-fired domestic appliance producing hot water - Part 6 : assessment of energy consumption of ad-sorption and ab-sorption heat pumps
NF X20-525-1*NF EN ISO 6978-1:2005 Natural gas - Determination of mercury - Part 1 : sampling of mercury by chemisorption on iodine.
NF EN ISO 6978-1:2005 Gaz naturel - Détermination de la teneur en mercure - Partie 1 : échantillonnage de mercure par chimisorption sur iode
NF X43-510-1*NF EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1 : pumped sampling

Professional Standard - Aviation, Nitrogen zirconium adsorption

HB 5422.23-1989 Determination of zirconium content by arsenazoⅢ absorptiophotometric method for chemical analysis of copper alloy
HB 5220.36-1995 Determination of Zirconium Content by Arsenazo Ⅲ Direct Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
HB 5220.36-2008 Methods for chemical analysis of superalloys. Part 36: Determination of zirconium content by arsenazo Ⅲ photometric method
HB 5220.37-1995 Chemical analysis methods of superalloys Tantalum reagent-benzene extraction-ArsenazoⅢ Absorption photometry Determination of zirconium content
HB 5220.37-2008 Methods for chemical analysis of superal loys. Part 37: Determination of zirconium content by N-benzoyl-N-phenylhydroxylamine-benzene extraction-arsenazo Ⅲ photometric method

Korean Agency for Technology and Standards (KATS), Nitrogen zirconium adsorption

KS M ISO 4652:2014 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
KS M ISO 4652-2014(2019) Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
KS M ISO 4652-1:2010 Rubber compounding ingredients-Carbon black-Determination of specific surface area by nitrogen adsorption methods-Part 1:Single-point procedures
KS M ISO 4652-1:2014 Rubber compounding ingredients－Carbon black－Determination of specific surface area by nitrogen adsorption methods－Part 1：Single-point procedures
KS M 1429-2004 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M ISO 8008:2003 Aluminium oxide primarily used for the production of aluminium-Determination of specific surface area by nitrogen adsorption-Single-point method
KS M ISO 8008-2003(2018)
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS I ISO 12884:2008 Ambient air－Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons－Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS I ISO 6978-1:2021 Natural gas ― Determination of mercury ― Part 1: Sampling of mercury by chemisorption on iodine
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS I ISO 6978-1-2009(2019) Natural gas－Determination of mercury－Part 1：Sampling of mercury by chemisorption on iodine

Universal Oil Products Company (UOP), Nitrogen zirconium adsorption

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

Standard Association of Australia （SAA）, Nitrogen zirconium adsorption

AS 2879.4:2003 Alumina - Determination of specific surface area by nitrogen adsorption

United States Navy, Nitrogen zirconium adsorption

NAVY MIL-HDBK-1024/3 NOTICE 2-2012 OXYACETYLENE AND NITROGEN AND BREATHING OXYGEN FACILITIES

U.S. Military Regulations and Norms, Nitrogen zirconium adsorption

ARMY MIL-PRF-32016 A-2002 CELL, GAS PHASE, ADSORBER

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Nitrogen zirconium adsorption

ASHRAE 4658-2003 Solid Sorption Gas-Fired Heat Pump
ASHRAE AT-96-20-5-1996 Analytical Study of a Gas-Fired Adsorptive Air-Conditioning System
ASHRAE AT-96-20-1-1996 Advanced Sorption Chillers for Gas Cooling

Association of German Mechanical Engineers, Nitrogen zirconium adsorption

VDI 3928-2017 Waste gas cleaning by chemisorption
VDI 3928-1992 Waste gas cleaning by chemisorption
VDI 3674-1998 Waste gas cleaning by adsorption - Process and waste gas cleaning
VDI 3674-2013 Waste gas cleaning by adsorption - Process gas and waste gas cleaning
VDI 2100 Blatt 3-2011 Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption
VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
VDI 2454 Blatt 1-1982 Gaseous air pollution measurement; measurement of hydrogen sulphide concentration; molybdenum blue sorption method
VDI 3496 Blatt 1-1982 Gaseous emission measurement; determination of basic nitrogen compounds seizable by absorption in sulphuric acid

US-FCR, Nitrogen zirconium adsorption

FCR UFGS-43 13 13.13-2007 VAPOR PHASE ACTIVATED CARBON ADSORPTION UNITS
FCR NE-M-16-1T-1981 GAS-PHASE ADSORBENTS FOR TRAPPING RADIOACTIVE IODINE AND IODINE COMPOUNDS

International Organization for Standardization (ISO), Nitrogen zirconium adsorption

ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
ISO 4652:2020 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
ISO 4652-1:1994 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Part 1: Single-point procedures
ISO 9277:1995 Determination of the specific surface area of solids by gas adsorption using the BET method
ISO 8008:1986 Aluminium oxide primarily used for the production of aluminium; Determination of specific surface area by nitrogen adsorption; Single-point method
ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 12884:2000 Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
ISO 15901-2:2006 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption
ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption
ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption
ISO 22252:2020 Manned submersibles — Breathing air supply and CO2 adsorption systems — Performance requirements and recommendations
ISO 15901-2:2006/cor 1:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption; Technical Corrigendum 1

Professional Standard - Petroleum, Nitrogen zirconium adsorption

SY/T 6154-1995 Static Nitrogen Adsorption Capacity Method for Determination of Rock Specific Surface and Pore Size Distribution

Professional Standard - Environmental Protection Certification Specification , Nitrogen zirconium adsorption

HCRJ 037-1998 Adsorption gas cleaner for industrial emission

Professional Standard - Environmental Protection, Nitrogen zirconium adsorption

HJ/T 199-2005 Water quality Determination of tota-nitrogen Gas-phase molecular absorption spectrometry
HJ/T 195-2005 Water quality - Determination of ammonia-nitrogen Gas-phase molecular absorption spectrometry
HJ/T 196-2005 Water quality - Determination of Kjeldahl-nitrogen Gas-phase molecular absorption spectrcmetry
HJ 583-2010 Ambient air.Determination of benzene and its analogies using sorbent adsorption thermal desorption and gas chromatography
HJ/T 198-2005 Water quality - Determination of nitrate-nitrogen Gas-phase molecular absorption spectrometry
HJ/T 197-2005 Water quality - Determination of nitrite-nitrogen Gas-phase molecular absorption spectrometry
HJ 584-2010 Ambient air.Determination of benzene and its analogies by activated charcoal adsorption carbon disulfide desorption and gas chromatography
HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method
HJ 692-2014 Stationary source emission.Determination of nitrogen oxides.Non-dispersive infrared absorption method
HJ 1132-2020 Portable UV Absorption Method for Determination of Nitrogen Oxide in Exhaust Gas from Stationary Pollution Sources
HJ 645-2013 Ambient air.Determination of volatile halogenated hydrocarbons.Activated charcoal adsorption and carbon disulfide desorption/gas chromatographic method
HJ 2026-2013 Technical specifications of adsorption method for industrial organic emissions treatment project
HJ 917-2017 Determination of Gaseous Mercury in Exhaust Gases from Stationary Pollution Sources Activated Carbon Adsorption/Pyrolysis Atomic Absorption Spectrophotometry
HJ 734-2014 Stationary source emission.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption gas chromatography mass spectrometry method
HJ/T 386-2007 Technical requirement for environmental protection product. Adsorption gas cleaner for industrial emission

Hunan Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB43/T 2264-2021 Determination of the main elements of organic matter carbon, hydrogen, oxygen, nitrogen, sulfur adsorption separation - thermal conductivity method

未注明发布机构, Nitrogen zirconium adsorption

BS ISO 8008:2005(2006) Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption
BS EN ISO 6978-1:2005(2006) Natural gas — Determination of mercury — Part 1 : Sampling of mercury by chemisorption on iodine

CU-NC, Nitrogen zirconium adsorption

NC 41-32-8-1985 Leather. Conglomerate Determination of Water Vapor Absorption and Desorption

International Federation of Trucks and Engines, Nitrogen zirconium adsorption

NAVISTAR CEMS A-40 SEC B-2014 VOID - Case Hardened Iron And Steel Parts - Aerated Salt Nitriding And Gaseous Ferritic Nitrocarburizing (Includes Appendix)

German Institute for Standardization, Nitrogen zirconium adsorption

DIN 66138:2008 Isothermal measurement of the sorption of vapours at solids
DIN 66138:2008-09 Isothermal measurement of the sorption of vapours at solids
DIN 66132:1975-07 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Dümbgen
DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN ISO 12884:2000 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
DIN EN 145:2000 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking (includes Amendment A1:2000); German version EN 145:1997 + A1:2000
DIN EN ISO 16017-1:2001 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000
DIN EN 13203-6:2018 Gas-fired domestic appliance producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
DIN EN 13203-6:2022 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
DIN EN 13203-6:2022-11 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps; German version EN 13203-6:2022 / Note: This standard is part of the DVGW body of rules.
DIN ISO 9277:2014 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN EN 13203-6:2021 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps; German and English version prEN 13203-6:2021
DIN EN 145:2000-06 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking (includes Amendment A1:2000); German version EN 145:1997 + A1:2000
DIN 51865-1:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 1: Chemisorption on Iodine, atomic absorption spectrometry (AAS)
DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN 66135-2:2001 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN 51865-3:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 3: Absorption in solutions, atomic absorption spectrometry (AAS)

BE-NBN, Nitrogen zirconium adsorption

NBN T 03-425-1988 Aluminium oxide primarily used forthe production of aluminium - Determination of specifie surface area by nitrogen adsorption - Single-point method

国家能源局, Nitrogen zirconium adsorption

SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method

Professional Standard - Forestry, Nitrogen zirconium adsorption

LY/T 1971-2011 Activated carbon for hydrogen purification by pressure swing adsorption

Fujian Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB35/T 1012-2010 Organic waste gas adsorption purification recovery device

RO-ASRO, Nitrogen zirconium adsorption

STAS 13083-1992 Determination of pores with radius dimension of 0...300 A by adsorption of nitrogen on pored solids
STAS 13072-1992 Determination of pores volume having the radius of 0 ... 300 A by adsorbtion of nitrogen on porous solids

Danish Standards Foundation, Nitrogen zirconium adsorption

DS/EN 145/A1:2000 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking
DS/EN 145:1998 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking
DS/EN ISO 6978-1:2005 Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine

Lithuanian Standards Office , Nitrogen zirconium adsorption

LST EN 145+A1-2001 Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking

KR-KS, Nitrogen zirconium adsorption

KS M ISO 4652-1-2010 Rubber compounding ingredients－Carbon black－Determination of specific surface area by nitrogen adsorption methods－Part 1：Single-point procedures
KS I ISO 6978-1-2021 Natural gas ― Determination of mercury ― Part 1: Sampling of mercury by chemisorption on iodine

AENOR, Nitrogen zirconium adsorption

UNE-EN 145/A1:2001 RESPIRATORY PROTECTIVE DEVICES. SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE. REQUIREMENTS, TESTING, MARKING.
UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method

Shandong Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB37/T 2704-2015 Determination of nitrogen oxides in exhaust gas from stationary pollution sources by ultraviolet absorption method

Professional Standard - Chemical Industry, Nitrogen zirconium adsorption

HG/T 3073-1999 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of specific surface area - Nitrogen adsorption method

RU-GOST R, Nitrogen zirconium adsorption

GOST 33586-2015 Activated carbon. Standard method for gas-phase adsorption testing
GOST R 51878-2002 Adsorptive gas cleaners. Safety requirements and test methods
GOST 12.4.249-2013 Occupational safety standards system. Individual protective respiratory devices. Compressed oxygen or compressed oxygen-nitrogen type self-contained clos-circuit breathing apparatus. General technical requirements. Test methods. Marking

Professional Standard - Building Materials, Nitrogen zirconium adsorption

JC/T 2188-2013 Purificatory performance of adsorbing material with air purification

Japanese Industrial Standards Committee (JISC), Nitrogen zirconium adsorption

JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS L 1954:2022 Textiles -- Determination of water vapour sorption/desorption properties over time
JIS A 1966:2005 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Pumped sampling
JIS A 1966:2015 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Pumped sampling
JIS Z 8830:2001 Determination of the specific surface area of powders (solids) by gas adsorption method
JIS A 1470-2:2008 Determination of water vapour adsorption/desorption properties for building materials -- Part 2 : Response to temperature variation
JIS A 1470-1:2008 Determination of water vapour adsorption / desorption properties for building materials -- Part 1: Response to humidity variation
JIS A 1470-1:2014 Determination of water vapour adsorption/desorption properties for building materials -- Part 1: Response to humidity variation
JIS R 1626:1996 Measuring methods for the specific surface area of fine ceramic powders by gas adsorption using the BET method
JIS A 1470-2 AMD 1:2014 Determination of water vapour adsorption/desorption properties for building materials -- Part 2: Response to temperature variation (Amendment 1)
JIS A 1967:2005 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1967:2015 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Diffusive sampling

Beijing Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB11/T 1566-2018 Determination of Trimethylbenzene in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Carbon Disulfide-Gas Chromatography

Professional Standard - Railway, Nitrogen zirconium adsorption

TB/T 3183-2007 Absorbent Compressed Air Dryer on Locomotive and Power Car

能源, Nitrogen zirconium adsorption

NB/T 10019-2015 Experimental method for multi-component gas isothermal adsorption of coal

工业和信息化部, Nitrogen zirconium adsorption

YS/T 1161.3-2016 Methods for analysis of pseudoboehmite Part 3: Determination of pore volume and specific surface area Nitrogen adsorption method
YB/T 4908.6-2021 Determination of oxygen and nitrogen content in vanadium-aluminum alloys by inert gas fusion infrared absorption method and thermal conductivity method

Liaoning Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB21/T 3072-2018 Determination of nitrogen oxides in exhaust gas from stationary pollution sources by ultraviolet-visible absorption method

Professional Standard - Agriculture, Nitrogen zirconium adsorption

SC/T 9444-2023 Determination of ammonia nitrogen in aquaculture water by gas phase molecular absorption spectrometry
13 OIE陆生动物诊断试验和疫苗手册-2005 Enzyme-linked immunosorbent assay for chicken infectious bronchitis
2367药典二部-2010 Appendix Ⅹ H Determination of droplet (particle) distribution of inhalation aerosol, inhalation powder aerosol and inhalation spray

ES-UNE, Nitrogen zirconium adsorption

UNE-EN 145:1998 RESPIRATORY PROTECTIVE DEVICES. SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE. REQUIREMENTS, TESTING, MARKING.
UNE-EN 13203-6:2023 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps

Professional Standard - Energy, Nitrogen zirconium adsorption

NB/T 10915-2021 Technical specifications for regenerative adsorption hydrogen dryers in nuclear power plants
NB/T 20143.6-2019 Nuclear Air and Gas Handling Code Process Gas Handling Part 6: Adsorbent Media
NB/T 20039.15-2012 Code on nuclear air and gas treatment.Ventilation, air conditioning and air cleaning.Part 15: Adsorbent media
NB/T 20039.12-2011 Code on nuclear air and gas treatment Ventilation,air conditioning and cleaning.Part 12:Iodine adsorber(type Ⅱ)
NB/T 20039.11-2011 Code on nuclear air and gas treatment Ventilation,air conditioning and cleaning.Part 11:Iodine adsorber(type Ⅰ)
NB/T 20039.13-2012 Code on nuclear air and gas treatment.Ventilation, air conditioning and air cleaning.Part 13: Iodine adsorbers(type III)

VN-TCVN, Nitrogen zirconium adsorption

TCVN 3896-1984 Natural gases.Method of absorption for the determination of carbon dioxide and total of gaseous acid contents by VTI-2

Military Standard of the People's Republic of China-General Armament Department, Nitrogen zirconium adsorption

GJB 570.11-1988 Meteorological instrument finalization test method for air humidity sensors with adsorbent elements

NL-NEN, Nitrogen zirconium adsorption

NVN 2958-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2968-1992 Air quality. Workplace atmosphere. Determination of the concentration of ketones by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2964-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous chlorinated hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2961-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatic hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2956-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2965-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous chlorinated hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2967-1992 Air quality. Workplace atmosphere. Determination of the concentration of ketones by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2969-1992 Air quality. Workplace atmosphere. Determination of the concentration of esters by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2960-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatic hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NEN 2931-1993 Air quality. Workplace atmosphere. Determination of the concentration of vinylchloride by active sorbent tube sampling, liquid desorption and gas chromatography

European Committee for Standardization (CEN), Nitrogen zirconium adsorption

EN 13203-6:2018 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
prEN 13203-6-2021 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
EN 13203-6:2022 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
EN 1076:1997 Workplace Atmospheres - Pumped Sorbent Tubes for the Determination of Gases and Vapours - Requirements and Test Methods

AT-ON, Nitrogen zirconium adsorption

OENORM EN 13203-6-2021 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps

Professional Standard - Commodity Inspection, Nitrogen zirconium adsorption

SN/T 1164.3-2006 Protocol of ELISA for infectious bovine rhinotracheitis

Professional Standard - Electricity, Nitrogen zirconium adsorption

DL/T 2369-2021 Technical guidelines for sulfur trioxide removal from flue gas in thermal power plants Alkaline adsorption method

国家市场监督管理总局、中国国家标准化管理委员会, Nitrogen zirconium adsorption

GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation
GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy

Sichuan Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB51/T 2043-2015 Determination of Oxygen and Nitrogen Content in Vanadium Aluminum Alloy Inert Gas Fusion-Infrared Absorption Method and Thermal Conductivity Method

Defense Logistics Agency, Nitrogen zirconium adsorption

DLA MIL-M-83521/5 VALID NOTICE 1-2013 Maintenance Kits, Electrical,Connectors, Contacts, and Connector and Cable Accessories: Maintenance Kit for General Purpose, (Air/Nitrogen Heat Gun)

Xinjiang Provincial Standard of the People's Republic of China, Nitrogen zirconium adsorption

DB65/T 3910-2016 Determination of total mercury in flue gas of coal-fired power plants Adsorption-pyrolysis atomic absorption spectrophotometry by activated carbon tube