ZH
RU
ES

Calorific value of lithium combustion

Calorific value of lithium combustion, Total:500 items.

In the international standard classification, Calorific value of lithium combustion involves: Protection against fire, Construction materials, Fuels, Burners. Boilers, Crude petroleum, Buildings, Domestic, commercial and industrial heating appliances, Gas and steam turbines. Steam engines, Installations in buildings, Natural gas, Petroleum products in general, Products of the chemical industry, Equipment for the chemical industry, Thermodynamics and temperature measurements, Environmental protection, Domestic safety, Heat treatment, Heat recovery. Thermal insulation, Refractories, Processes of the textile industry, Coals, Kitchen equipment, Analytical chemistry, Protection against dangerous goods, Coatings and related processes used in aerospace industry, Iron and steel products, Accident and disaster control, Plastics, Electrical wires and cables, Insulating fluids, Vocabularies, Industrial furnaces, Equipment for the metallurgical industry, Occupational safety. Industrial hygiene, Metrology and measurement in general, Products of the textile industry, Non-textile floor coverings, Materials for aerospace construction, ENERGY AND HEAT TRANSFER ENGINEERING, Non-ferrous metals, Elements of buildings, Energy and heat transfer engineering in general, Electrical engineering in general, Test conditions and procedures in general, Explosion protection, Nuclear energy engineering, Testing of metals, Ferrous metals.

Danish Standards Foundation, Calorific value of lithium combustion

DS/EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
DS/EN 226:1988 Atomizing oil burners. Connecting dimensions between burners and heat generators
DS/EN 1:1980 Flued oil stoves with vaporizing burners
DS/EN 26+AC:1998 Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners
DS/ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
DS/EN 15400:2011 Solid recovered fuels - Determination of calorific value
DS/ISO 21654:2021 Solid recovered fuels – Determination of calorific value
DS/EN 14918:2010 Solid biofuels - Determination of calorific value
DS/EN 26/A3:2007 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
DS/EN 26/A2:2004 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
DS/EN 26/A1:2002 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burner
DS/EN 203-2-1:2006 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
DS/EN 61100:1994 Classification of insulating liquids according to fire point and net calorific value
DS/EN 13240/A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
DS/EN 13240:2003 Roomheaters fired by solid fuel - Requirements and test methods
DS/EN ISO 21654:2021 Solid recovered fuels – Determination of calorific value (ISO 21654:2021)
DS/EN 1020:2010 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
DS/EN 778:2010 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
DS/EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
DS/EN 621:2010 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
DS/EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
DS/ISO 1928:1980 Solid mineral fuels. Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value

Association Francaise de Normalisation, Calorific value of lithium combustion

NF P92-521*NF EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
NF P92-521:2013 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
NF EN 226:1988 Brûleurs à fioul à pulvérisation - Dimensions de liaison entre brûleur et générateur de chaleur.
NF E31-313*NF EN 226:1988 Atomizing oil burners. Connecting dimensions between burners and heat generators.
NF T51-074:1986 Plastics. Fire behaviour. Hot wire test.
NF D35-322/A1:2001 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners.
NF M03-005:2011 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value.
NF X34-208:2011 Solid recovered fuels - Determination of calorific value.
NF X34-208*NF EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value
NF X34-104*NF EN ISO 18125:2017 Solid biofuels - Determination of calorific value
NF EN ISO 21654:2021 Combustibles solides de récupération - Détermination du pouvoir calorifique
NF EN ISO 18125:2017 Biocombustibles solides - Détermination du pouvoir calorifique
NF M07-030:1996 Combustibles liquides pétroliers - Détermination du pouvoir calorifique
NF D32-725-2-1*NF EN 203-2-1:2021 Gas heated catering equipment - Part 2-1 : specific requirements - Open burners and wok burners
NF D35-322/A2:2004 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners.
NF D35-322/A3:2006 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners.
NF D35-322:1997 Gas-fired instantaneous water heaters for sanitory uses production, fitted with atmospheric burners.
NF D32-307*NF EN 13240:2002 Roomheaters fired by solid fuel - Requirements and test methods
NF D32-307/A2*NF EN 13240/A2:2005 Roomheaters fired by solid fuel - Requirements and test methods
NF C27-301*NF EN 61100:1992 Classification of insulating liquids according to fire point and net calorific value.
NF EN 304:2017 Chaudières de chauffage - Règles d'essai pour les chaudières pour brûleurs à fioul à pulvérisation
NF E31-511:1998 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products.
NF EN 746-2:2010 Équipements thermiques industriels - Partie 2 : prescriptions de sécurité concernant la combustion et la manutention des combustibles
NF P92-527:2013 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
NF P92-527:2015 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
NF P92-527/IN1*NF EN 13823/IN1:2015 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
NF E31-511:2010 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products.
NF EN 61100:1992 Classification des isolants liquides selon le point de feu et le pouvoir calorifique inférieur
NF EN 1266/A1:2005 Appareils de chauffage indépendants à convection utilisant les combustibles gazeux et intégrant un ventilateur pour faciliter l'alimentation en air comburant et/ou l'évacuation des produits de combustion
NF EN 1266:2003 Appareils de chauffage indépendants à convection utilisant les combustibles gazeux et intégrant un ventilateur pour faciliter l'alimentation en air comburant et/ou l'évacuation des produits de combustion

HU-MSZT, Calorific value of lithium combustion

Lithuanian Standards Office , Calorific value of lithium combustion

LST EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
LST EN 226+AC1-2001 Atomizing oil burners - Connecting dimensions between burners and heat generators
LST EN 15400-2011 Solid recovered fuels - Determination of calorific value
LST EN 14918-2010 Solid biofuels - Determination of calorific value
LST EN 26+AC-2001/A1-2001 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
LST EN 26+AC-2001/A2-2004 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
LST EN 26+AC-2001/A3-2007 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
LST EN 203-2-1-2006 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
LST EN 13240-2002 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 13240-2002/A2-2004 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 13240-2002/AC-2006 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 13240-2002/A2-2004/AC-2007 Roomheaters fired by solid fuel - Requirements and test methods
LST EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
LST EN 778-2010 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
LST EN 1020-2010 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
LST EN 26+AC-2001 Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)
LST EN 621-2010 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
LST EN 13823-2010+A1-2015 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
LST EN 416-1-2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety

AENOR, Calorific value of lithium combustion

UNE-EN ISO 1716:2011 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
UNE 51112:1985 AVIATION FUELS. ESTIMATION OF NET HEAT OF COMBUSTION
UNE 9226:1989 ATOMIZING OIL BURNERS. CONNECTING DIMENSIONS BETWEEN BURNERS AND HEAT GENERATORS.
UNE-EN 14918:2011 Solid biofuels - Determination of calorific value
UNE-EN 15400:2011 Solid recovered fuels - Determination of calorific value
UNE-EN 203-2-1:2015 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
UNE-EN 61100:1996 CLASSIFICATION OF INSULATING LIQUIDS ACCORDING TO FIRE POINT AND NET CALORIFIC VALVE.
UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.
UNE-EN 1020:2010 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
UNE 51123:1986 STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
UNE-EN 621:2010 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
UNE-EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety

国家质量监督检验检疫总局, Calorific value of lithium combustion

SN/T 4942-2017 Determination of the combustion heat value of biofuels Oxygen bomb calorimetry

Professional Standard - Railway, Calorific value of lithium combustion

TB/T 2981-2000 Determination of the highest calorific value of material combustion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calorific value of lithium combustion

GB/T 14402-2007 Reaction to fire tests for building materials and products.Determination of the heat of combustion
GB/T 14402-1993 Test method of heat of combustion for building materials
GB/T 12206-1990 Method of testing for calorific value of gas in urban areas
GB 2429-1988 Calculation method of net calorific value of aviation fuel
GB/T 2429-1988 Aviation fuels--Calculation of net heat of combustion
GB/T 21736-2008 Technical specifications of energy-saving combustion devices for heat treating
GB/T 21614-2008 Dangerous goods.Test method for heat combustion of spray aerosols
GB/T 14403-2014 Test method for combustion heat release of building materials
GB/T 14403-1993 Test method of release heat by combustion for building materials
GB/T 2407-1980 Plastics--Combustion performance test--Blazing rod method
GB/T 12206-2006 Testing method to determine the calorific values of town gas
GB/T 11785-2005 Reaction to fire tests for floorings.Determination of the burning behaviour using a radiant heat source
GB 20665-2006 Minimum allowable values of energe efficiency and energy efficiency grades for domestic gas instantaneous water heater and gas fired heating-hot water combi-boilers
GB 20665-2015 Minimum allowable values of energy efficiency and energy efficiency grades for domestic gas instantaneous water heaters and gas fired heating and hot water combi-boilers

AT-ON, Calorific value of lithium combustion

ONORM C 1138-1966
ONORM M 7443-7-1999 Gas appliances with atmospheric burners - Emission values
ONORM M 7443 Teil.7-1991 Gas appliances with atmospheric burners; emission values
ONORM M 7441 Teil.3-1981 Gas-fired space heaters; radiating heaters with atmospheric burners
ONORM EN 226-1987 Atomizing oil burners; connecting dimensions between burners and heat generators
ONORM M 7441 Teil.1-1981 Gasfired space heaters: gas convection heaters with atmospheric burners
ONORM M 7441 Teil.4-1981 Gas-fired space heaters; gas convection heaters with atmospheric burners for garages
ONORM M 7451 Teil.1-1985 Stationary gas-fired fan-assisted air heaters with atmospheric burners
ONORM M 7441 Teil.2-1982 Gas-fired space heaters; gas convection heating insets with atmospheric burners
OENORM EN 16510-2-1-2021 Residential solid fuel burning appliances - Part 2-1: Roomheaters

American Society for Testing and Materials (ASTM), Calorific value of lithium combustion

ASTM D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D6446-01(2006) Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D4529-01(2011) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338/D3338M-09(2014)e2 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4529-01(2006) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4529-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4529-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338/D3338M-09 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4868-00 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D4868-90(1995)e1 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D4868-00(2005) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D4891-89(2006) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D4891-89(2001) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D1405/D1405M-08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4891-89(1994)e1 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM D240-02(2007) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-92(1997)e2 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D1405-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D1405-95a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM D3338-92 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338/D3338M-20 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4529-17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338/D3338M-09(2014)e1 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338-08 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D1405/D1405M-08 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM D240-14 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-17 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D6890-21 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D4891-13 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM D3338/D3338M-09(2014) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D240-87(1991)e1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-76 Standard Test Method for Heat Of Combustion Of Liquid Hydrocarbon Fuels By Bomb Calorimeter
ASTM D240-87e1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D7668-12 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsmdash;Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D7668-12a Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsmdash;Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D7668-14 Standard Test Method for Determination of Derived Cetane Number 40;DCN41; of Diesel Fuel Oilsmdash;Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D4809-09a Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D3338-05 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338-00 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM E1602-01 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D3338-04 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D7668-10 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsIgnition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D6890-18 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D6890-16e2 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D4891-13(2018) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
ASTM D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D7668-17 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM E1602-03 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM D2382-83 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
ASTM D2382-76 Standard Test Method for Heat Of Combustion Of Hydrocarbon Fuels By Bomb Calorimeter (High-Precision Method)
ASTM D4809-09ae1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D2382-88 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
ASTM D4809-13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D7170-09 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsx2014;Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D7170-12 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsmdash;Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D6890-04 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM E2021-06 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-01 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-00 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-15 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09(2013) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM D4809-06 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D4809-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D4809-95 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D4809-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D4809-00(2005) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

PL-PKN, Calorific value of lithium combustion

PN C04062-1986 Petroleum products Determination of gross heat of combustion by bomb calorimeter and calculation of net heat of combustion, of li?uid fuels
PN C96002-1986 Gas fuels Messuring of gross and net calorific values with an calorimeter
PN BN 6093-12-1966
PN M35004-1990 Industrial gas burners Series of nomina? thermal power
PN C04198-1993 Petroleum products. Estimation of net heat of combustion of aviation fuels by calculation method
PN-EN ISO 18125-2017-07 P Solid biofuels -- Determination of calorific value (ISO 18125:2017)
PN C04302-1989 Coke of hard coal Thermogravimetric method of combustibility determina.tion
PN C04757-1985 Gaseous fuels Calculation of gross and net calorific value, density, relative density and Wobbe index from gas composition

Military Standard of the People's Republic of China-General Armament Department, Calorific value of lithium combustion

GJB 4633-1993*GJBz 20161.1-1993 Military combustion agent performance test method Determination of calorific value of oil-based combustion agent
GJB 4634-1993*GJBz 20161.2-1993 Military combustion agent performance test method Determination of combustion agent heat flow density
GJB 737.5-1993 Test methods for pyrotechnics agents - Determination of heat of explosion and combustion - Adiabatic calorimeter method
GJB 8684.3-2015 Test methods for performance of pyrotechnics Part 3: Adiabatic method for determination of heat of combustion

European Committee for Standardization (CEN), Calorific value of lithium combustion

EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN 226:1987 Atomizing Oil Burners: Connecting Dimensions Between Burners and Heat Generators
EN 226:1987/AC1:1987 Atomizing oil burners; Connecting dimensions between burners and heat generators
EN 26:1977/A3:1984 Gas burning appliances for instantaneous production of hot water for domestic use
EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
EN 15400:2011 Solid recovered fuels - Determination of calorific value
FprEN 203-2-1-2021 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
EN 1:1980 Flued oil stoves with vaporizing burners
prEN 26 prA1-1993 Gas burning appliances for instantaneous production of hot water for domestic use with atmospheric burner and sealed combustion circuit equipped with a fan incorporated in the "combustion air" or "combustion products" circuit
EN ISO 9239-1:2002 Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source ISO 9239-1: 2002
prEN 16510-2-1-2021 Residential solid fuel burning appliances - Part 2-1: Roomheaters
EN 16510-2-1:2022 Residential solid fuel burning appliances - Part 2-1: Roomheaters
EN 203-2-1:2014 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
EN 13823:2002 Reaction to Fire Tests for Building Products - Bulding Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item
prEN 16510-2-5 Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances
prHD 1002-1991 Independent gas-fired convection heaters with a natural draught burner and a permanent pilot
EN 13823:2010 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (Incorporates Amendment A1: 2014)
EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
prEN 297-1989 Gas-fired central heating boilers fitted with atmospheric burners; type B11 boilers of nominal heat input not exceeding 70 kW
prEN 297 prA1-1991 Gas-fired central heating boilers fitted with atmospheric burners; type B11 boilers of nominal heat input not exceeding 70 kW

Professional Standard - Commodity Inspection, Calorific value of lithium combustion

SN/T 4112-2015 Determination of combustion calorific value of polypropylene plastic - Oxygen bomb calorimetry
SN/T 3101-2012 Estimation of net and gross heat of combustion of burner and diesel fuels
SN/T 3125-2012 Determination of heat of combustion of liquid hydrocarbon fuels.Bomb calorimeter
SN/T 2171-2008 Heat combustion test method for spray aerosols of dangerous goods

ES-UNE, Calorific value of lithium combustion

UNE-EN ISO 1716:2021 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
UNE-EN ISO 21654:2022 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
UNE-EN ISO 18125:2018 Solid biofuels - Determination of calorific value (ISO 18125:2017)
UNE-EN 203-2-1:2022 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
UNE-EN 304:2018 Heating boilers - Test code for heating boilers for atomizing oil burners
UNE-EN 16715:2016 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection

International Organization for Standardization (ISO), Calorific value of lithium combustion

ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
ISO/CD TS 23947-2.2 Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
ISO 1928:1976 Solid mineral fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
ISO 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
ISO 21654:2021 Solid recovered fuels - Determination of calorific value
ISO 18125:2017 Solid biofuels - Determination of calorific value
ISO/TS 19700:2007 Controlled equivalence ratio method for the determination of hazardous components of fire effluents
ISO 6976:1983 Natural gas; Calculation of calorific value, density and relative density
ISO 1716:2002 Reaction to fire tests for building products - Determination of the heat of combustion
ISO 10774:1992 Solid fuelled heaters; test method for determining allowable clearances from combustible surfaces

British Standards Institution (BSI), Calorific value of lithium combustion

BS EN ISO 1716:2010 Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
BS EN ISO 1716:2018 Tracked Changes. Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
BS DD ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Guidance on the use of heat flux meters in fire tests
BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests
BS ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
BS EN 15400:2011 Solid recovered fuels. Determination of calorific value
BS 7256:1990 Specification for roomheaters burning wood logs
BS EN ISO 21654:2021 Solid recovered fuels. Determination of calorific value
BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
DD CEN/TS 15400:2006 Solid recovered fuels — Methods for the determination of calorific value
BS EN 416-1:1999 Single burner gas-fired overhead radiant-tube heaters - Safety
BS EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
BS DD CEN/TS 14918:2005 Solid Biofuels — Method for the determination of calorific value
BS DD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
BS DD CEN/TS 14918:2006 Solid biofuels - Method for the determination of calorific value
BS EN 61100:1993 Classification of insulating liquids according to fire point and net calorific value
19/30384386 DC BS EN 203-2-1. Gas heated catering equipment. Part 2-1. Specific requirements. Open burners and wok burners
BS 3378:1986 Specification for roomheaters burning solid mineral fuels
17/30358084 DC BS EN 203-2-1 AMD1. Gas heated catering equipment. Part 2-1. Specific requirements. Open burners and wok burners
BS 799-8:1988 Oil burning equipment. Specification for connecting dimensions between atomizing oil burners and heat generators
19/30369419 DC BS EN ISO 21654. Solid recovered fuels. Determination of calorific value
20/30389844 DC BS ISO 1928. Solid mineral fuels. Determination of gross calorific value
BS EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
23/30465589 DC BS EN 304. Heating boilers. Test code for heating boilers for atomizing oil burners
BS EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of
BS EN 303-2:2017 Heating boilers. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
23/30465592 DC BS EN 303-2. Heating boilers - Part 2. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)

German Institute for Standardization, Calorific value of lithium combustion

DIN EN ISO 1716:2018-10 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018); German version EN ISO 1716:2018
DIN EN 226:1988 Atomizing oil burners; connecting dimensions between burners and heat generators; german version EN 226:1987
DIN 51857:1997 Gaseous fuels and other gases - Calculation of calorific value, density, relative density and Wobbe index of pure gases and gas mixtures
DIN 4733:1990-01 Oil fired bath water heaters with vaporizing burners
DIN EN 226:1988-06 Atomizing oil burners; connecting dimensions between burners and heat generators; german version EN 226:1987
DIN 4733:1990 Oil fired bath water heaters with vaporizing burners
DIN EN 26:2007 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners; German version EN 26:1997+AC:1998+A1:2000+A2:2004+A3:2006
DIN EN 203-2-1:2022 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
DIN EN 203-2-1:2019 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners; German and English version prEN 203-2-1:2019
DIN EN 203-2-1:2022-05 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners; German version EN 203-2-1:2021 / Note: This standard is part of the DVGW body of rules.*Applies in conjunction with DIN EN 203-1 (2022-05).
DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
DIN 4702-7:1996 Heating boilers - Part 7: Condensing boiler for liquid fuels
DIN V 30687:1991 Sauna-heating-appliances with atmospheric burners
DIN 4702-6:1990 Central heating boilers; condensing boilers for gaseous fuels
DIN EN ISO 21654:2021-12 Solid recovered fuels - Determination of calorific value (ISO 21654:2021); German version EN ISO 21654:2021
DIN 4731:1989-07 Oil-fired heated units with vaporizing burners; requirements, testing, marking / Note: To be amended by DIN 4731/A1 (1997-07).
DIN 4731:1989 Oil-fired heated units with vaporizing burners; requirements, testing, marking
DIN 4794-3:1980 Stationary fan-assisted air heaters; gas fired air heaters with interchange of heat, requirements, testing
DIN EN 778:2010 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products; German version EN 778:2009
DIN EN 2310:1991 Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
DIN EN 16510-2-1:2023 Residential solid fuel burning appliances - Part 2-1: Roomheaters
DIN EN 16510-2-1:2023-02 Residential solid fuel burning appliances - Part 2-1: Roomheaters; German version EN 16510-2-1:2022 / Note: DIN EN 13240 (2005-10) and DIN EN 13240 Berichtigung 1 (2008-06) remain valid alongside this standard until 2025-11-30.
DIN EN 15250 Berichtigung 1:2015-05 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007, Corrigendum to DIN EN 15250:2007-06
DIN EN 15250:2007-06 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 / Note: DIN 18840 (2005-08) remains valid alongside this standard until 2007-09-01.*To be replaced by DIN EN 15250 (2012-10).
DIN EN ISO 18125:2017 Solid biofuels - Determination of calorific value (ISO 18125:2017)
DIN EN ISO 18125:2017-08 Solid biofuels - Determination of calorific value (ISO 18125:2017); German version EN ISO 18125:2017
DIN 4791:1985 Electrical connectors between burner and heat generator
DIN 4791:1985-09 Electrical connectors between burner and heat generator
DIN EN 125:2016-01 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices; German version EN 125:2010+A1:2015 / Note: Applies in conjunction with DIN EN 13611 (2015-09).*To be replaced by DIN EN 125 (2020-06).
DIN EN 125:2020-06 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices; German and English version prEN 125:2020 / Note: Date of issue 2020-05-15*Intended as replacement for DIN EN 125 (2016-01).
DIN EN 16510-2-5:2023-05 Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances; German and English version prEN 16510-2-5:2023 / Note: Date of issue 2023-04-07*Intended as replacement for DIN EN 15250 (2007-06), DIN EN 15250 Berichtigung 1 (2015-05).
DIN EN ISO 21654:2020 Solid recovered fuels - Determination of calorific value (ISO/DIS 21654:2019); German and English version prEN ISO 21654:2019
DIN 18840:2005 Fireplaces fired by solid fuel - Slow heat release appliances - Requirements, testing and marking
DIN 18894:2005-02 Fireplaces fired by solid fuel - Woodpellet-fired independent heaters - Requirements, testing and marking
DIN 51900-3:2005 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
DIN 25463-1:1990 Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels
DIN 18230-2:1999 Structural fire protection in industrial buildings - Part 2: Determination of combustion behaviour of materials in storage arrangement - Combustion factor m

ES-AENOR, Calorific value of lithium combustion

Society of Automotive Engineers (SAE), Calorific value of lithium combustion

SAE J1498-2011 Heating Value of Fuels
SAE J1498-1998 Heating Value of Fuels
SAE AMS2447C-2006 Coating, Thermal Spray High Velocity Oxygen/Fuel Process
SAE AMS2447D-2012 Coating, Thermal Spray High Velocity Oxygen/Fuel Process

SAE - SAE International, Calorific value of lithium combustion

SAE J1498-1990 Heating Value of Fuels@ Information Report
SAE J1498-1988 Heating Value of Fuels
SAE J1498-1987 Heating Value of Fuels
SAE J1498-2005 Heating Value of Fuels
SAE J1498-2017 Heating Value of Fuels

CZ-CSN, Calorific value of lithium combustion

CSN 65 6169-1986 Liquid fuels. Determination of gross and net heat of combustion
CSN 73 0824-1992 Fire protection of buildings. Heating value of flammable substances
CSN 38 5521-1960 Determination of the gross and net calorific value of fuel gases.
CSN 44 1352-1980 Solid fuels. Determination of calorific values
CSN EN 226-1993 Atomizing oil burners. Connecting dimensions between burners and heat generators
CSN EN 26-1992 Gas burning appliances for instantaneous production of hot water for domestic use
CSN 34 5615 Z2-1995
CSN 06 4310-1998 Gas fuel burners for Industrlal furnaces. Series of nominal thermal output

Korean Agency for Technology and Standards (KATS), Calorific value of lithium combustion

KS M 2057-2006 Crude petroleum and petroleum products－Determination and estimation of heat of combustion
KS E ISO 1928-2015(2020) Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
KS M ISO 18125:2021 Solid biofuels — Determination of calorific value
KS B 8903-2017(2022) Pellet combustion device for small heating boilers
KS K 0813-2018 Test method for flammability of blankets
KS B 8903-2017 Pellet combustion device for small heating boilers
KS B 8214-2009 Flame supervision device for gas-burning appliances－ Thermo-electric types
KS M 2057-2006(2016) Crude petroleum and petroleum products —Determination and estimation of heat of combustion
KS M 2057-2006(2021) Crude petroleum and petroleum products —Determination and estimation of heat of combustion
KS M 2057-1987 Crude petroleum and petroleum products —Determination and estimation of heat of combustion
KS B 8053-2022 Gas heat pump — Ducted appliances — Testing and rating for performance

GOSTR, Calorific value of lithium combustion

GOST 34210-2017 Petroleum fuels. Determination of the heat of combustion in calorimetric bomb
GOST R 58440-2019 Middle distillate fuels. Determination of derived cetane number using a constant volume combustion chamber with direct fuel injection

RU-GOST R, Calorific value of lithium combustion

GOST 34240-2017 Aviation fuels. Estimation of net heat of combustion
GOST 34194-2017 Aviation fuels. Estimation of net heat of combustion
GOST 27193-1986 Natural combustible gases. Method for determination of calorific value with water calorimeter
GOST R 55851-2013 Gas burners, gas/oil burner and pulverized solid fuel/gas burners of steam and hot-water boilers. Acceptance test. Basis requirements
GOST R 50591-1993 Gas-consuming thermal units. Industrial gas-burners. Limiting concentration rates of NOx in combustion products
GOST 147-2013 Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value
GOST 21261-1991 Oil products. Method for the determination of gross calorific value and calculation of net calorific value
GOST 8.026-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion and specific energy of combustion (combustion calorimeters)
GOST 8.026-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring quantity of heat
GOST 33299-2015 Liquid hydrocarbon fuels. Determination of the heat of combustion by bomb calorimeter (precision method)
GOST 33106-2014 Solid biofuel. Determination of calorific value
GOST 33108-2014 Solid recovered fuel. Determination of calorific value
GOST R 56025-2014 Building materials. Test method of heat of combustion
GOST 33013-2014 Room heaters, solid-fuel burning. Requirements and test methods
GOST 11065-1990 Jet propulsion fuel. Method for the calculation of low specific heat of combustion
GOST R 8.667-2009 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)
GOST R 50591-2013 Gas-consuming thermal units. Industrial gas burners. Limiting concentration rates of NOx in combustion products
GOST 10062-1975 Natural combustible gases. Method for determination of specific heat of combustion
GOST 28680-1990 Gas burners for industrial furnaces. Series of nominal heat outputs
GOST R 8.927-2016 State system for ensuring the uniformity of measurements. Solid mineral fuels. Gross and net calorific value. Accuracy parameters

TR-TSE, Calorific value of lithium combustion

TS 3562-1981 ESTIMATION OF NET HEAT OF COMBUSTION OF AVIATION FUELS

Taiwan Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

CNS 14475-2000 Method of test for estimation of net heat of combustion of aviation fuels
CNS 10835-1984 Method of Test for Gross Calorific Value of Solid Mineral Fuels by the Calorimeter Bomb Method, and Calculation of Net Calorific Value
CNS 6359-1980 Method of Test for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Caloriment
CNS 14705-2007 Method of test for heat release rate for building materials - Cone calorimeter method
CNS 14705-2002 Method of test for heat release rate for building materials

Underwriters Laboratories (UL), Calorific value of lithium combustion

UL 733-1993 UL Standard for Safety Oil-Fired Air Heaters and Direct-Fired Heaters Fourth Edition; Reprint with Revisions Through and Including 12/13/2005
UL 462-1993 UL Standard for Safety Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances Second Edition; Reprint with Revisions Through and Including November 3, 2006
UL 1370-2011 Unvented alcohol fuel burning decorative heating appliances
UL 296A BULLETIN-2005 UL Standard for Safety Waste Oil-Burning Air-Heating Appliances
UL 296A BULLETIN-2000 UL Standard for Safety Waste Oil-Burning Air-Heating Appliances
UL 296A BULLETIN-2012 UL Standard for Safety Waste Oil-Burning Air-Heating Appliances
UL 296A BULLETIN-2009 UL Standard for Safety Waste Oil-Burning Air-Heating Appliances
UL 296A BULLETIN-2011 UL Standard for Safety Waste Oil-Burning Air-Heating Appliances
UL 1370 BULLETIN-2012 UL Standard for Safety Unvented Alcohol Fuel Burning Decorative Heating Appliances

Group Standards of the People's Republic of China, Calorific value of lithium combustion

T/CECS 10007-2018 Burner for combiboiler and water heater
T/ZJCX 0018-2022 Regenerative thermal oxidizer of industrial organic waste gas
T/CIECCPA 004-2022 Technical specification for infrared radiation emergency heating by gas catalytic combustion
T/CCAS 018-2021 Determination of calorific value of low thermal value raw fuel for cement
T/CITS 0005-2023 Evaluation specifications for domestic gas fast water heater with air-cooled combustion chamber
T/EERT 026-2022 Guidelines for safety risk assessment of regenerative thermal oxidizer
T/NAIA 0138-2022 Determination method of calorific value of light liquid fuel oil (oxygen bomb calorimetry)
T/CPCIF 0261-2023 Design specification of flare system for low calorific value combustible gases

United States Navy, Calorific value of lithium combustion

NAVY MIL-H-5484 C (1)-1965 HEATER; AIRCRAFT, COMBUSTION TYPE
NAVY MIL-H-5484 C-1964 HEATER; AIRCRAFT, COMBUSTION TYPE

SE-SIS, Calorific value of lithium combustion

SIS SS 18 71 72-1984 Biofuels - Determination of gross calorific value by calorimeter and calculation of net calorific value
SIS SS 15 51 38-1992 Petroleum products Calculation of heat of combustion
SIS SS-EN 226-1988 Atomizing oil burners — Connecting dimen- sions between burners and heat generators
SIS SS 18 71 82-1990 Solid fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value

Guangdong Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

DB44/T 402.6-2007 Burners for domestic gas instantaneous water heater

Professional Standard-Ships, Calorific value of lithium combustion

CB/T 4484-2018 Electric heater for marine oil burner

Professional Standard - Machinery, Calorific value of lithium combustion

JB/T 8055-1996 Direct-fired lithium bromide absorption chiller and hot water unit
JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer

NL-NEN, Calorific value of lithium combustion

NEN 1884-1980 Liquid fueis - Determination of the gross calorie value with an adiabatic calorimeter and derivation of the net calorific value
NEN 1974-1986 Solid mineral fuels - Calculation of the hydrogen content and the net calorific value from the volatile matter content and the gross calorific value

CL-INN, Calorific value of lithium combustion

INDITECNOR 20-19ch-1960

BE-NBN, Calorific value of lithium combustion

NBN D 18-003-1987
NBN T 52-095-1985 Aviation fuels - Estimation of net heat of combustion
NBN T 52-095-1978 Aviation fuels - Estimation of net heat of combustion
NBN-EN 61100-1993 Classification of insulating liquids according to fire point and net calorific value

Professional Standard - Energy, Calorific value of lithium combustion

NB/SH/T 6035-2021 Determination of Cetane Number Derived from Diesel Oil Ignition Lag and Combustion Lag Method in Constant Volume Combustion Chamber
NB/SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method
NB/SH/T 0883-2014 Standard test method for determination of ignition delay and derived cetane number of diesel fuel oil by combustion in a constant volume chamber

海关总署, Calorific value of lithium combustion

SN/T 3125-2021 Determination of heat of combustion of liquid hydrocarbon fuels by bomb calorimeter method

工业和信息化部, Calorific value of lithium combustion

JBT13734-2019 Industrial organic waste gas regenerative thermal combustion device
JB/T 13734-2019 Industrial organic waste gas regenerative thermal combustion device
YB/T 4209-2020 Technical specifications for regenerative combustion in the steel industry
JB/T 13733-2019 Industrial organic waste gas regenerative catalytic combustion device
JBT13733-2019 Industrial organic waste gas regenerative catalytic combustion device

Professional Standard - Petrochemical Industry, Calorific value of lithium combustion

SH/T 0679-1999 Standard test method for estimation of net heat of combustion of aviation fuels

RO-ASRO, Calorific value of lithium combustion

STAS 8887-1971 TURBO-JET-FUEL Determination of combustion heat
STAS SR ISO 1928:1995 Solid mineral fuels Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
STAS 9198-1979 NATURAL GAS BURNERS FOR HEATING FURNACES General technical requirements for quality

National Metrological Verification Regulations of the People's Republic of China, Calorific value of lithium combustion

JJG 2058-1990 Verification Scheme of Measuring Instruments for Heat of Combustion

National Metrological Technical Specifications of the People's Republic of China, Calorific value of lithium combustion

JJF 1353-1990 Heat of Combustion Reference Operating Specifications

ZA-SANS, Calorific value of lithium combustion

SANS 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorific method, and calculation of net calorific value
SANS 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
SANS 329:2008 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel-handling systems

CEN - European Committee for Standardization, Calorific value of lithium combustion

EN ISO 18125:2017 Solid biofuels - Determination of calorific value
PREN 203-2-1-2019 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
PD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
PD CEN/TS 14918:2005 Solid Biofuels - Method for the determination of calorific value
PREN 13240-2011 Room heaters fired by solid fuel - Requirements and test methods
PREN 16510-2-1-2013 Residential solid fuel burning appliances - Part 2-1: Roomheaters
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety

KR-KS, Calorific value of lithium combustion

KS M ISO 18125-2021 Solid biofuels — Determination of calorific value

Sichuan Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

DB51/T 1398-2011 Biomass Gas Calorific Value Determination Method

Professional Standard - Ferrous Metallurgy, Calorific value of lithium combustion

YB/T 4128-2014 Refractory bricks for hot blast stove ceramic combustor
YB/T 4128-2005 Cordierite brick for hot blast stove ceramic combustor
YB/T 4209-2010 Regenerative combustion technical specification of iron and steel industry

API - American Petroleum Institute, Calorific value of lithium combustion

API RP 532-1982 Measurement of the Thermal Efficiency of Fired Process Heaters (First Edition)
API PUBL 4099-1971 A FIELD INVESTIGATION OF EMISSIONS FROM FUEL OIL COMBUSTION FOR SPACE HEATING
API RP 573-2003 Inspection of Fired Boilers and Heaters (Second Edition)
API RP 573-1991 Inspection of Fired Boilers and Heaters (FIRST EDITION)
API RP 531M-1980 Measurement of Noise from Fired Process Heaters (First Edition)
API RP 535 RUSSIAN-2006 Burners for Fired Heaters in General Refinery Servies (Second Edition)

未注明发布机构, Calorific value of lithium combustion

DIN EN 26:2001 Gas-fired continuous water heaters for sanitary use with atmospheric burners
SAE AMS2447D-2019 Coating, Thermal Spray High Velocity Oxygen/Fuel Process

American National Standards Institute （ANSI), Calorific value of lithium combustion

ANSI/ASHRAE Standard 41.13-2023 Standard Methods for Fuel Higher Heating Value Measurement
ANSI/ASHRAE 118.1-2012 Method of Testing for Rating Commercial Gas, Electric and Oil Service Water Heating Equipment
BS EN 203-2-1:2021 Tracked Changes. Gas heated catering equipment Specific requirements. Open burners and wok burners (British Standard)
ANSI/UL 2523-2013 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers
ANSI/UL 296A-2013 Standard for Safety for Waste Oil-Burning Air-Heating Appliances
ANSI Z21.91-2007 Ventless Firebox Enclosures for Gas-Fired Unvented Decorative Room Heaters

BELST, Calorific value of lithium combustion

STB GOST R 8.667-2012 System for ensuring the uniformity of measurements of the Republic of Belarus. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)

YU-JUS, Calorific value of lithium combustion

JUS M.F8.013-1990 Atomizing cil bumers. Connecting dimensions betv/een burners andheatgenerators
JUS IEC 1100:1994 Classification of insulating liquids according to fire-point and net calorific value

U.S. Military Regulations and Norms, Calorific value of lithium combustion

ARMY MIL-PRF-62315 C NOTICE 1-1997 HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR
ARMY MIL-PRF-62315 C-1997 HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR
ARMY MIL-PRF-32222 VALID NOTICE 1-2011 Heater, Vehicular Compartment Multifuel Burning 24 Volt, DC 15,000 - 30,000 BTU/HR

US-FCR, Calorific value of lithium combustion

FCR AF I32-1068-1998 HEATING SYSTEMS AND UNFIRED PRESSURE VESSELS
FCR AF AFI AMC 32-1068 SUPP 1-1995 HEATING SYSTEMS AND UNFIRED PRESSURE VESSELS

Shanghai Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

DB31/ 435-2009 Specification for safety and efficiency of gas direct-fired lithium bromide absorption water chiller (heater)

国家市场监督管理总局、中国国家标准化管理委员会, Calorific value of lithium combustion

GB/T 38693-2020 Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Thermoelectric flame supervision controls

Japanese Industrial Standards Committee (JISC), Calorific value of lithium combustion

JIS K 7201-2:2007 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
JIS K 7201-3:2008 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
JIS K 2279:1993 Crude petroleum and petroleum products -- Determination and estimation of heat of combustion
JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
JIS K 2279:2003 Crude petroleum and petroleum products -- Determination and estimation of heat of combustion
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating

Shandong Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

DB37/T 1715-2010 Guidelines for Operation and Maintenance of Gas Turbines Burning Medium and Low Calorific Value Gas
DB37/T 4359-2021 Safety technical requirements for gas combustion system of metallurgical steel rolling heating furnace

国家能源局, Calorific value of lithium combustion

SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

American Petroleum Institute (API), Calorific value of lithium combustion

API RP 573-2021 Inspection of Fired Boilers and Heaters (FOURTH EDITION)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calorific value of lithium combustion

GB/T 35211-2017 Measurement of nature gas calorific value—Continuous combustion
GB/T 33304-2016 Testing method of combustion characteristics of coal—Thermogravimetric analysis
GB/T 33618-2017 Textiles—Test method for visible smoke release and heat release properties during combustion process

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Calorific value of lithium combustion

AHRI IWH-TS-1-2003 PERFORMANCE OF INDIRECT-FIRED WATER HEATERS - TESTING STANDARD

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calorific value of lithium combustion

ASHRAE 118.1-2008 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Service Water Heating Equipment
ASHRAE 118.1-2003 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Service Water Heating Equipment
ASHRAE 118.1-2012 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Service Water-Heating Equipment
ASHRAE ST-16-012-2016 Optimizing Excess Air in Relation to Energy@ Temperature@ and Reduction of Emissions of Methane Gas in a Combustion Nozzle— Using Numerical Combustion Modeling
ASHRAE 4168-1998 The Knitted Metal Fiber Burner: A New Generation of Surface Combustion Material for Radiant Heat and Low NOx Applications

Anhui Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

DB34/T 3764-2020 Test method for energy saving of flue gas waste heat utilization of commercial gas burning appliances

Professional Standard - Electricity, Calorific value of lithium combustion

DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity

CH-SNV, Calorific value of lithium combustion

SN EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)

Hebei Provincial Standard of the People's Republic of China, Calorific value of lithium combustion

DB13/T 2778-2018 Test method for thermal performance of civil clean combustion stoves

Professional Standard - Military and Civilian Products, Calorific value of lithium combustion

WJ 1905-1990 Determination of pyrotechnic combustion agent flame temperature by thermal radiation method

Association of German Mechanical Engineers, Calorific value of lithium combustion

VDI 4670 Blatt 1-2003 Thermodynamic properties of humid air and combustion gases
VDI 4670 Blatt 1-2016 Thermodynamic properties of humid air and combustion gases

Canadian Standards Association/American National Standards , Calorific value of lithium combustion

CSA/AM CSA/ANSI Z21.40.4-1996 Performance Testing and Rating of Gas-Fired, Air Conditioning and Heat Pump Appliances First Edition; CSA/CGA 2.94-M96; Addenda A-1998

Professional Standard - Non-ferrous Metal, Calorific value of lithium combustion

YS/T 1028.4-2015 Methods for chemical analysis of lithium iron phosphate.Part 4:Determination of carbon content.High frequency combustion with infrared absorption method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Calorific value of lithium combustion

GJB 5384.3-2005 Test methods of performance for pyrotechnic composition Part 3: Determination of combustion heat Adiabatic method
GJB 5891.28-2006 Test method of loading material for initiating explosive device Part 28: Measurement of heat for combustion and explosion Method of adiabatic calorimetric

Professional Standard - Nuclear Industry, Calorific value of lithium combustion

EJ/T 20197-2018 Operation requirements for pyrolysis and incineration of low-level combustible solid waste

Professional Standard - Aviation, Calorific value of lithium combustion

HB 7581-1998 Minimum performance requirements for internal combustion heat exchange heaters in civil aircraft

TH-TISI, Calorific value of lithium combustion

TIS 1339-2007 Reaction to fire tests for building products.determination of the heat of combustion

NZ-SNZ, Calorific value of lithium combustion

AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission