ZH

RU

ES

Infrared wavelength measurement

Infrared wavelength measurement, Total:497 items.

In the international standard classification, Infrared wavelength measurement involves: Industrial furnaces, Astronomy. Geodesy. Geography, Semiconductor devices, Nuclear energy engineering, Protection against crime, Optoelectronics. Laser equipment, Fibre optic communications, Semiconducting materials, Domestic, commercial and industrial heating appliances, Applications of information technology, Optics and optical measurements, Testing of metals, Farming and forestry, Air quality, Medical equipment, Ferroalloys, Thermodynamics and temperature measurements, Fuels, Soil quality. Pedology, Insulating fluids, Construction industry, Special measuring equipment for use in telecommunications, Audio, video and audiovisual engineering, Acoustics and acoustic measurements, Alarm and warning systems, Edible oils and fats. Oilseeds, Electrical and electronic testing, Paper and board, Rubber, Metalliferous minerals, Non-metalliferous minerals, Cereals, pulses and derived products, Paints and varnishes, Analytical chemistry, Coals, Farm buildings, structures and installations, Iron and steel products, Tobacco, tobacco products and related equipment, Powder metallurgy, Metrology and measurement in general, Fertilizers, Water quality, Organic chemicals, Ferrous metals, Geology. Meteorology. Hydrology, Linear and angular measurements, Products of the chemical industry, Animal feeding stuffs, Elements of buildings, Road engineering, Materials for the reinforcement of composites, Protection of and in buildings, Petroleum products in general, Inorganic chemicals, Non-ferrous metals, Characteristics and design of machines, apparatus, equipment, Agricultural machines, implements and equipment, Rubber and plastics products, Meat, meat products and other animal produce, Kitchen equipment, Electrical wires and cables, Sugar. Sugar products. Starch, Medical sciences and health care facilities in general, Installations in buildings, Power stations in general, Radiocommunications, Plastics, Vocabularies, Radiation measurements, Pulps, Tea. Coffee. Cocoa.


国家市场监督管理总局、中国国家标准化管理委员会, Infrared wavelength measurement

  • GB/T 18497.2-2019 Characteristics of electric infrared emitters for industrial heating—Part 2: Mediumwave and longwave electric infrared emitters
  • GB/T 4333.10-2019 Ferrosilicon—Determination of carbon content—Infrared absorption method
  • GB/T 7731.10-2021 Ferrotungsten—Determination of carbon content—Infrared absorption method
  • GB/T 1557-2018 Test method for determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 24583.7-2019 Vanadium-nitrogen—Determination of oxygen content—Infrared absorption method
  • GB/T 24583.6-2019 Vanadium-nitrogen—Determination of sulfur content—Infrared absorption method
  • GB/T 24583.4-2019 Vanadium-nitrogen—Determination of carbon content—Infrared absorption method
  • GB/T 14949.11-2021 Manganese ores—Determination of carbon content—Gravimetric method and infrared absorption method
  • GB/T 38976-2020 Test method for the oxygen concentration in silicon materials—Inert gas fusion infrared detection method
  • GB/T 36691-2018 Methyl vinyl silicone rubber—Determination of vinyl content—Near infrared spectroscopy
  • GB/T 41366-2022 Livestock and poultry meat quality testing—Determination of moisture, protein and fat—Near-infrared spectroscopy method
  • GB/T 23801-2021 Determination of fatty acid methyl ester (FAME) content in middle distillates—Infrared spectrometry
  • GB/T 4333.7-2019 Ferrosilicon—Determination of sulfur content—Infrared absorption method and chromatographic separation-barium sulfate gravimetric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared wavelength measurement

  • GB/T 36540-2018 VIS-SWIR spectral reflectivity measurement of water
  • GB 10408.6-1991 Combination microwave and passive infrared intrusion detector
  • GB 10408.6-2009 Combination Microwave and Passive Infrared Intrusion Detector
  • GB 10408.6-2009"> Combination Microwave and Passive Infrared Intrusion Detector
  • GB 10408.6-2009 Combination Microwave and Passive Infrared Intrusion Detector
  • GB 10408.7-1996 Combination ultrasonic & passive infrared intrusion detector
  • GB/T 8758-1988 Measuring thickness of epitaxial layers of gallium arsenide by infrared interference
  • GB/T 8758-2006 Measuring thickness of epitaxial layers of gallium arsenide by infrared interference
  • GB 8758-1988 Measuring thickness of epitaxial layers of gallium arsenide by infrared interference
  • GB/T 4701.8-2009 Ferrotitanium-Determination of carbon content-The infrared absorption method
  • GB/T 3653.7-2020 Ferroboron—Determination of sulfur content—Infrared absorption method
  • GB/T 5059.7-2014 Ferromolybdenum.The determination of carbon content.Infrared absorption method
  • GB/T 1558-1997 Test method for substitutional atomic carbon content of silicon by infrared absorption
  • GB/T 1558-2009 Test method for substitutional atomic carbon concent of silicon by infrared absorption
  • GB/T 14143-1993 Infrared Absorption Measurement Method of Oxygen Content in the Gap of 300-900μm Silicon Wafer
  • GB/T 7287.6-1987 Measuring method for insulation resistance of infrared heater
  • GB/T 1557-1989 The method of determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 1557-2006 The method of determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 24583.4-2009 Vanadium.Nitrogen alloy.Determination carbon of content.The infrared absorption method
  • GB/T 24583.6-2009 Vanadium-Nitrogen alloy.Determination of sulfur content.The infrared absorption method
  • GB/T 24583.7-2009 Vanadium-Nitrogen alloy.Determination of oxygen content.The infrared absorption method
  • GB/T 24896-2010 Inspection of grain and oils-Determination of moisture content in paddy-Near-infrared method
  • GB/T 24898-2010 Inspection of grain and oils-Determination of moisture content in wheat-Near-infrared method
  • GB/T 24900-2010 Inspection of grain and oils-Determination of moisture content in maize-Near-infrared method
  • GB/T 25219-2010 Inspection of grain and oils.Determination of starch content in maize.Near-infrared method
  • GB/T 26051-2010 Hardmetals.Determination of sulfur and carbon contents in cobalt metal powders.Infrared detection method
  • GB/T 8570.6-1988 Liquefied anhydrous ammonia--Determination of oil content--Gravimetric and infra-red methods
  • GB/T 5059.9-2008 Ferromolybdenum.Determination of sulfur content.The infrared absorption method and the combustion-iodate volumetric method
  • GB/T 8704.1-2009 Ferrovanadium-Determination of carbon content-The infrared absorption method and the gasometric method
  • GB/T 7287.9-1987 Measuring method for normal total emittance of infrared heater
  • GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
  • GB/T 24902-2010 Inspection of grain and oils-Determination of crude fat content in maize-Near-infrared method
  • GB/T 24872-2010 Inspection of grain and oils-Determination of ash content in wheat flour-Near-infrared method
  • GB/T 7287.2-1987 Measuring method for the surface temperature distribution of infrared heater
  • GB/T 8705.1-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
  • GB/T 8705.3-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
  • GB/T 5687.8-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of sulfur content
  • GB/T 4701.8-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content
  • GB/T 5059.9-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of sulfur content
  • GB/T 24897-2010 Inspection of grain and oils-Crude protein determination in rice-Near-infrared method
  • GB/T 24899-2010 Inspection of grain and oils-Determination of crude protein in wheat-Near-infrared method
  • GB/T 24901-2010 Inspection of grain and oils-Determination of crude protein in maize-Near-infrared method
  • GB/T 7287.10-1987 Measuring method for normal spectral emittance of infrared heater
  • GB/T 4333.10-1990 Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
  • GB/T 7731.10-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content
  • GB/T 5059.7-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of carbon content
  • GB/T 4701.10-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of sulfur content
  • GB/T 5687.5-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of carbon content
  • GB/T 7731.12-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content
  • GB/T 14847-1993 Test method for thickness of lightly doped silicon eqitaxial layers on heavily doped silicon substrates by infrared reflectance
  • GB/T 14847-2010 Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
  • GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
  • GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
  • GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
  • GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
  • GB/T 24871-2010 Inspection of grain and oils-Crude protein determination in wheat flour-Near-infrared method
  • GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
  • GB/T 7287.7-1987 Measuring method for electric-to-radiant power transfer efficiency of infrared heater
  • GB/T 4699.4-2008 Ferrochromium and silicochromium. Determination of carbon content. Infrared absorption method and gravimetric method
  • GB/T 4700.5-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content
  • GB/T 223.82-2018 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
  • GB/T 7287.3-1987 Measuring method for the radio between radiant surface and rear surface of infrared heater
  • GB/T 7287.4-1987 Measuring method for temperature rise time and fall time of infrared heater
  • GB/T 5686.5-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
  • GB/T 5686.7-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of sulfur content
  • GB/T 6730.61-2005 Iron ores-Determination of carbon and sulfur content-High frequency combustion with infrared absorption method
  • GB/T 6730.61-2022 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
  • GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
  • GB/T 4699.6-1988 Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of sulfur content
  • GB/T 4699.4-1988 Methods for chemical analysis of silicochromium The infrared absorption method for the determination of carbon content
  • GB/T 8704.1-1997 Methods for chemical analysis of ferrovandium. The infrared absorption method and the gasometric method for the determination of carbon content
  • GB/T 5441.10-1985 Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method
  • GB/T 32573-2016 Determination of total carbon content of silicon powder Infrared absorption method after combustion in induction furnace
  • GB/T 23801-2009 Determination of fatty acid methyl esters(FAME) in middle distillates by infrared spectroscopy method
  • GB/T 26196-2010 Fireworks and firecrackers.Determination of carbon content in pyrotechnic compositions.High frequency-infrared absorption method
  • GB/T 6150.4-2008 Methods for chemical analysis of tungsten concentrates.Determination of sulfur content .The high frequency-infrared absorption method
  • GB/T 11140-2008 Standard test method for sulfur in petroleum products by wavelength dispersive X-ray fluorescence spectrometry
  • GB/T 11261-2006 Steel and lron - Determination of oxygen content - The pulse heating inert gas fusion-infra-red absorption method
  • GB/T 4701.10-2008 Ferrotitanium. Determination of sulfur content. Infrared absorption method and combustion-neutralization titration method
  • GB/T 7731.12-2008 Ferrotungsten. Determination of sulfur content. Infrared absorption method and combustion titration method
  • GB/T 8704.3-2009 Ferrovanadium.Determination of sulfur content.The infrared absorption method and the combustion-neutralization titration method
  • GB/T 24870-2010 Inspection of grain and oils-Crude protein and crude fat determination in soybean-Near-infrared method
  • GB/T 42275-2022 Hardmetals—Determination of total carbon content—High frequency combustion infrared absorption or thermal conductivity method
  • GB/T 21931.1-2008 Nickel,ferronickel and nickel alloys.Determination of carbon content.Infrared absorption method afer induction furnace combustion
  • GB/T 21931.2-2008 Nickel,ferronickel and nickel alloys.Determination of sulfur content.Infrared absorption method after induction furnace combustion
  • GB/T 223.85-2009 Steel and iron.Determination of sulfur content.Infrared absorption method after combustion in an induction furnace
  • GB/T 29652-2013 Direct reduced iron.Determination of carbon and sulfur.High frequency combustion with infrared absorption method
  • GB/T 24581-2009 Test method for low temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared wavelength measurement

  • GB/T 33988-2017 VIS-SWIR spectral reflectivity measurement of urban surface features

Professional Standard - Electron, Infrared wavelength measurement

  • SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth
  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
  • SJ/T 11496-2015 Determination of boron concentration in gallium arsenide by infrared absorption
  • SJ/T 11491-2015 Test methods for measurement of interstitial oxygen content in silicon by short baseline infrared absorption spectrometry
  • SJ/T 2658.7-2015 Measuring method for semiconductor infrared-emitting diode.Part 7: Radiant flux
  • SJ/T 10625-1995 Determination method for interstitial atomic oxygen content of germanium by infrared abaorption
  • SJ/T 2658.1-2015 Measuring method for semiconductor infrared-emitting diode.Part 1: General
  • SJ 2658.7-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for radiant flux
  • SJ/T 2658.4-2015 Measuring method for semiconductor infrared-emitting diode.Part 4: Total capacitance
  • SJ/T 2658.2-2015 Measuring method for semiconductor infrared-emitting diode.Part 2: Forward voltage
  • SJ/T 2658.5-2015 Measuring method for semiconductor infrared-emitting diode.Part 5:Series connection resistance
  • SJ/T 2658.6-2015 Measuring method for semiconductor infrared-emitting diode.Part 6: Radiant power
  • SJ/T 2658.8-2015 Measuring method for semiconductor infrared-emitting diode.Part 8: Radiant intensity
  • SJ/T 2658.10-2015 Measuring method for semiconductor infrared-emitting diode.Part 10: Modulation bandwidth
  • SJ/T 2658.11-2015 Measuring method for semiconductor infrared-emitting diode.Part 11: Response time

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared wavelength measurement

  • GJB 5892-2006 Measuring method of infrared emissivity
  • GJB/J 6220-2008 Calibration specification for IR optical focal length measuring equipment

Military Standard of the People's Republic of China-General Armament Department, Infrared wavelength measurement

  • GJB 8700-2015 Infrared radiation rate measurement method
  • GJB 3147-1998 General specifications for infrared tracking measurement systems
  • GJB 8677-2015 Calibration procedures for infrared optical transfer function measuring devices
  • GJB 8703-2015 Calibration procedures for focal length measurement devices of infrared optical systems
  • GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system
  • GJB 8221-2014 The method of power measurement for short high power microwave pulse of outdoor range

British Standards Institution (BSI), Infrared wavelength measurement

  • BS EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments. Michelson interferometer single wavelength meters
  • BS EN IEC 60793-1-44:2023 Optical fibres - Measurement methods and test procedures. Cut-off wavelength
  • BS EN 60793-1-44:2002 Optical fibres - Measurement methods and test procedures - Cut-off wavelength
  • BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
  • BS DD CLC/TS 50131-2-4:2004 Alarm systems - Intrusion systems - Requirements for combined passive infrared and microwave detectors
  • BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
  • BS ISO 4689-3:2004 Iron ores - Determination of sulfur content - Combustion/infrared method
  • BS ISO 4689-3:2017 Iron ores. Determination of sulfur content. Combustion/infrared method
  • BS ISO 19579:2006 Solid mineral fuels - Determination of sulfur by IR spectrometry
  • BS EN 60793-1-44:2011 Optical fibres. Measurement methods and test procedures. Cut-off wavelength
  • BS EN 50131-2-5:2008 Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
  • BS DD 220:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
  • BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
  • BS EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
  • PD ISO/TR 9686:2017 Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
  • BS DD CLC/TS 50131-2-5:2004 Alarm systems - Intrusion systems - Requirements for combined passive infrared and ultrasonic detectors
  • BS EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Requirements for combined passive infrared and microwave detectors
  • BS EN 50131-2-4:2020 Alarm systems - Intrusion and hold-up systems - Requirements for combined passive infrared and microwave detectors
  • BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
  • BS EN ISO 7526:2020 Tracked Changes. Ferronickels. Determination of sulfur content. Infrared absorption method after induction furnace combustion
  • BS ISO 11873:2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
  • BS EN ISO 14596:2007 Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
  • 21/30437793 DC BS EN 60793-1-44. Optical fibres. Part 1-44. Measurement methods and test procedures. Cut-off wavelength
  • BS EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Terminology and quantities used in UV-, visible and IR-exposure measurements
  • BS ISO 22754:2009 Pulp and paper. Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
  • BS ISO 22754:2008 Pulp and paper - Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
  • 20/30401630 DC BS ISO 22290. Non-destructive testing. Infrared thermographic testing. Thermoelastic stress measuring method. General Principles

German Institute for Standardization, Infrared wavelength measurement

  • DIN 50437:1979 Testing of semi-conductive inorganic materials; measuring the thickness of silicon epitaxial layer thickness by infrared interference method
  • DIN EN 62129-2:2012-03 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
  • DIN EN 238:2004-04 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996 + A1:2003
  • DIN EN ISO 17184:2014-09 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) (ISO 17184:2014); German version EN ISO 17184:2014
  • DIN EN 62129-2:2012 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
  • DIN EN 238:2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996 + A1:2003
  • DIN EN 60793-1-44:2012 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength (IEC 60793-1-44:2011); German version EN 60793-1-44:2011
  • DIN EN ISO 9556:2002-04 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
  • DIN EN 61847:1998 Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics (IEC 61847:1998); German version EN 61847:1998
  • DIN EN ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007); English version of DIN EN ISO 14596:2007-12
  • DIN EN ISO 14596:2007-12 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007); German version EN ISO 14596:2007
  • DIN 51440-1:2003 Testing of gasolines - Determination of phosphorus content - Part 1: Analysis by wavelength dispersive X-ray spectrometry (XRS)
  • DIN EN ISO 21789:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
  • DIN EN ISO 7526:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
  • DIN EN 24935:1992 Determination of sulfur content of steel and iron by infrared absorption spectroscopy after combustion in an induction furnace (ISO 4935:1989); german version EN 24935:1991
  • DIN EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors; German version EN 50131-2-4:2008
  • DIN 25703:1993 Determination of the uranium and plutonium content in nitric acid solutions by wavelength dispersive X-ray fluorescence analysis

Association Francaise de Normalisation, Infrared wavelength measurement

  • NF EN 50130-5:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF EN 302998-1:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF EN 62129-2:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF DTU 40.37:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF C93-846-2*NF EN 62129-2:2011 Calibration of wavelength/optical frequency measurement insturments - Part 2 : Michelson interferometer single wavelength meters.
  • NF M07-064*NF EN 238:1996 Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry.
  • NF EN 60793-1-44:2012 Fibres optiques - Partie 1-44 : méthodes de mesure et procédures d'essai - Longueur d'onde de coupure
  • NF EN 238/A1:2005 Produits pétroliers liquides - Essence - Détermination de la teneur en benzène par spectrométrie infrarouge
  • NF EN 238:1996 Produits pétroliers liquides - Essence - Détermination de la teneur en benzène par spectrométrie infrarouge.
  • NF EN ISO 17184:2014 Qualité du sol - Dosage du carbone et de l'azote par spectrométrie dans le proche infrarouge (SPIR)
  • NF T75-613*NF EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection.
  • NF EN 62129-1:2016 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1 : analyseurs de spectre optique
  • NF M07-064/A1*NF EN 238/A1:2005 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry.
  • NF EN ISO 7526:2020 Ferronickels - Détermination de la teneur en soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
  • NF C93-840-1-44*NF EN 60793-1-44:2012 Optical fibres - Part 1-44 : measurement methods and test procedures - Cut-off wavelength
  • NF A06-391*NF EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
  • NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
  • NF A10-621*NF EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
  • NF C93-846-1*NF EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1 : optical spectrum analyzers
  • NF A06-367*NF EN 24935:1992 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace.
  • NF X90-008-4*NF EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4 : terminology and quantities used in UV-, visible and IR-exposure measurements
  • NF M07-080*NF EN ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
  • NF EN ISO 14596:2007 Produits pétroliers - Détermination de la teneur en soufre - Spectrométrie de fluorescence X dispersive en longueur d'onde
  • NF ISO 7524:2020 Ferronickels - Détermination de la teneur en carbone - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
  • NF EN 15948:2020 Céréales - Détermination de la teneur en eau et en protéines - Méthode utilisant la spectroscopie dans le proche infrarouge sur des grains entiers
  • NF C48-331-2-4*NF EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Part 2-4 : requirements for combined passive infrared and microwave detectors
  • NF ISO 22754:2009 Pâte et papier - Détermination de la concentration d'encre résiduelle relative (nombre ERIC) par mesurage de la réflectance infrarouge
  • NF C48-331-2-4*NF EN 50131-2-4:2020 Alarm systems - Intrusion and hold-up systems - Part 2-4 : requirements for combined passive infrared and microwave detectors

PL-PKN, Infrared wavelength measurement

  • PN T06561-1971 Microwave measuring instruments Cavity wavemeter General requirements and tests
  • PN C04194-1992 Petroleum products Determination of the benzene content in gasoline by infrared spectrophotometric method
  • PN-EN 50131-2-4-2021-05 E Alarm systems -- Intrusion and hold-up systems -- Part 2-4: Requirements for combined passive infrared and microwave detectors

Japanese Industrial Standards Committee (JISC), Infrared wavelength measurement

  • JIS R 1803:2005 Method for the spectral radiant energy measurement of far infrared heaters specified in the far infrared region
  • JIS T 1205:2005 Ultrasound ophthalmic measuring system for the axial length
  • JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion
  • JIS C 61280-1-3:2010 Fiber optic communication subsystem test procedures -- Central wavelength and spectral width measurement

中华全国供销合作总社, Infrared wavelength measurement

  • GH/T 1319-2020 Cotton bale infrared imaging temperature measurement device
  • GH/T 1337-2021 Rapid determination of impurity content in seed cotton using near-infrared spectroscopy

International Electrotechnical Commission (IEC), Infrared wavelength measurement

  • IEC 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
  • IEC 60793-1-44:2023 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • IEC 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
  • IEC 60793-1-44:2001 Optical fibres - Part 1-44: Measurement methods and test procedures; Cut-off wavelength
  • IEC 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • IEC 60793-1-44:2023 CMV Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • IEC 62642-2-4:2010 Alarm systems - Intrusion and hold-up systems - Part 2-4: Intrusion detectors - Combined passive infrared/microwave detectors
  • IEC 62642-2-5:2010 Alarm systems - Intrusion and hold-up systems - Part 2-5: Intrusion detectors - Combined passive infrared/ultrasonic detectors

Group Standards of the People's Republic of China, Infrared wavelength measurement

  • T/HXCY 002-2021 Determination of Sugar Content of Saccharum Spontaneum -Near Infrared Spectrum(NIRS)
  • T/GDAQI 102-2023 Infrared devices of human skin temperature for instant screening
  • T/CECS 10149-2021 Determination of Concrete Admixture Quality Consistency Infrared Spectroscopy
  • T/IAWBS 007-2018 Test method for thickness of 4H silicon carbide homo-epitaxial layers by infrared reflectance
  • T/GPCIA 0007-2022 Instant quantitative determination of automobile diesel fuels with near-infrared spectrometry
  • T/GPCIA 0006-2022 Instant quantitative determination of automobile gasoline with near-infrared spectrometry
  • T/HXCY 006-2021 Determination of Crude Protein in Reed Canary Grass on Qinghai-Tibet Plateau by Near Infrared Method
  • T/JSJTQX 05-2019 Technical code for infrared spectrum identification of asphalt and determination of SBS content
  • T/CMES 08006-2020 Determination of Sulfur Content in Carburizers High Frequency Combustion Infrared Absorption Method
  • T/HXCY 005-2021 Determination of Crude Protein in Siberian wildrye on Qinghai-Tibet Plateau by Near Infrared Method
  • T/HXCY 003-2021 Code of Practice for Determination of Cellulose Content of Saccharum arundinaceum Based on the Method of Near Infrared Spectrum (NIRS)
  • T/NXCL 023-2023 Determination of hydrogen and nitrogen in Beryllium— Inert gas fusion infrared absorption/ thermal conductivity method
  • T/HBFPIA 015-2023 Determination of PBAT and PLA content in biodegradable plastics by mid-infrared spectroscopy
  • T/HXCY 022-2021 Operating Procedure for Determination of Crude Protein Content of Paper Mulberry Silage by Near-Infrared Spectrum(NIRS)Technology
  • T/CMES 08005-2020 Determination of Carbon and Sulfur Content in Ferrochromium Nitride High Frequency Combustion Infrared Absorption Method
  • T/GDMES 0007-2019 Test methods of energy-saving for air-conditioners and similar equipment with infrared human sensor
  • T/GZTSS 1-2021 Method for determination of theanine,theobromine constituents in tea by Near-infrared diffuse reflectance spectroscopy

Association of German Mechanical Engineers, Infrared wavelength measurement

  • VDI 2460 Blatt 3-1981 Gaseous emission measurement; infrared spectrometric determination of cresol
  • VDI 2460 Blatt 2-1974 Gaseous emission measurement; infrared spectrometric determination of dimethyl formamide
  • VDI 2460 Blatt 1-1996 Measurement of gaseous emissions - Infrared spectrometric determination of organic compounds - General principles
  • VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy

Danish Standards Foundation, Infrared wavelength measurement

  • DS/EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
  • DS/EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • DS/EN 238:1997 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • DS/EN 238/A1:2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • DS/ISO 4935:1993 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
  • DS/EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
  • DS/EN 24935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace
  • DS/EN 61847:2000 Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics
  • DS/EN ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
  • DS/EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
  • DS/EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements

CENELEC - European Committee for Electrotechnical Standardization, Infrared wavelength measurement

  • EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
  • DD ENV 50185-3-1995 Infra-Red Free Air Application Part 3: Measuring Conditions
  • EN 60793-1-44:2002 Optical Fibres Part 1-44: Measurement Methods and Test Procedures - Cut-Off Wavelength
  • CLC/TS 50131-2-4-2004 Alarm systems - Intrusion systems Part 2-4: Requirements for combined passive infrared and microwave detectors
  • CLC/TS 50131-2-5-2004 Alarm systems - Intrusion systems Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
  • PREN 50131-2-4-2019 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors

ES-UNE, Infrared wavelength measurement

  • UNE-EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (Endorsed by AENOR in October of 2011.)
  • UNE-EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength (Endorsed by AENOR in October of 2011.)
  • EN IEC 60793-1-44:2023 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • UNE-EN ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) (ISO 17184:2014) (Endorsed by AENOR in July of 2014.)
  • UNE-EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (Endorsed by AENOR in July of 2016.)
  • UNE-EN 50131-2-4:2021 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors

Professional Standard - Ferrous Metallurgy, Infrared wavelength measurement

  • YB/T 5339-2015 Ferrophosphorus.Determination of carbon content.The infrared absorption method
  • YB/T 5341-2015 Ferrophosphorus.Determination of sulfur content.The infrared absorption method
  • YB/T 4311-2012 Molybdenum oxide.Determination of sulfur content.The infrared absorption method
  • YB/T 4312-2012 Molybdenum oxide.Determination of carbon content.The infrared absorption method
  • YB/T 109.6-2012 Silicon barium alloy.Determination of carbon content.The infrared absorption method
  • YB/T 109.7-2012 Silicon barium alloy.Determination of sulfur content.The infrared absorption method
  • YB/T 5333-2009 Determination of sulfur content in vanadium pentoxide by infrared absorption method
  • YB/T 5339-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
  • YB/T 5341-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Sulfur Content
  • YB/T 191.7-2001 Methods for chemical analysis of chromium ores----The infrared absorption method for the determination of sulfur content
  • YB/T 109.6-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the determination of carbon content
  • YB/T 109.7-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the derermination of sulfur content
  • YB/T 5316-2006 Calcium silicon alloy chemical analysis method Infrared absorption method for determination of carbon content
  • YB/T 178.6-2008 Determination of carbon content in silicon-aluminum alloy and silicon-barium-aluminum alloy by infrared absorption method
  • YB/T 178.7-2008 Determination of sulfur content in silicon-aluminum alloy and silicon-barium-aluminum alloy by infrared absorption method
  • YB/T 4305-2012 Steel, iron and alloy.Determination of oxygen content.Infrared method after fusion under inert gas
  • YB/T 190.7-2014 Continuous casting mold powder.The determination of total carbon content.The gas volumetric method after combustion and the infrared absorption method

YU-JUS, Infrared wavelength measurement

  • JUS H.F8.232-1986 Gases. Determination of hydrocarbons content. Infrared spectrophotometric method
  • JUS H.F8.153-1986 Gases. Determination of carbon dioxid content. Infrared spectrophotometric method
  • JUS C.A1.703-1987 Nickel metal, ferronickel and nickel alloys. Determination of carbon content. Infra-red absorption met-hod after induction fumace combustion

International Organization for Standardization (ISO), Infrared wavelength measurement

  • ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer
  • ISO 19579:2006 Solid mineral fuels - Determination of sulfur by IR spectrometry
  • ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection
  • ISO 7106:1985 Liquefied anhydrous ammonia for industrial use; Determination of oil content; Gravimetric and infra-red spectrometric methods
  • ISO 4689-3:2004 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 4689-3:2017 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 4689-3:2015 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO/TR 9686:2017 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
  • ISO 9686:2006 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
  • ISO/TR 11046:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
  • ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
  • ISO 4935:1990 Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace
  • ISO 7524:2020 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
  • ISO 7526:2020 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
  • ISO 11873:2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
  • ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
  • ISO 14596:1998 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry

Professional Standard - Machinery, Infrared wavelength measurement

  • JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography

American National Standards Institute (ANSI), Infrared wavelength measurement

  • ANSI S4.6-1982 Method of measuring recorded flux of magnetic sound records at medium wavelengths
  • ANSI/TIA/EIA 455-80B-1998 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
  • ANSI/ASTM D6645:2001 Test Methods for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ANSI/TIA/EIA 455-106-1992 Procedure for Measuring the Near-Infrared Absorbance of Fiber Optic Coating Materials
  • ANSI/TIA/EIA 455-80-C-2003 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
  • ANSI/TIA-455-80-D-2020 IEC-60793-1-44 Optical Fibres-Part 1-44: Measurement Methods and Test Procedures- Cut-off Wavelength
  • ANSI/TIA/EIA 526-19-2000 Optical Signal-to-Noise Ratio Measurement Procedures for Dense Wavelength-Division Multiplexed Systems
  • ANSI/ASTM D2622:2005 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ANSI/TIA-455-80-C-2003 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power

Institute of Electrical and Electronics Engineers (IEEE), Infrared wavelength measurement

RU-GOST R, Infrared wavelength measurement

  • GOST R 52650-2006 Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods
  • GOST 26318.12-1984 Non-metallic ore materials. Infra-red method for determination of moisture mass fraction
  • GOST R 8.716-2010 State system for ensuring the uniformity of measurements. Reflectometers of the extreme ultraviolet radiation for measurements of the characteristics of multilayer nanostructures in the wavelength range 10 to 30 nm. Measurement procedure
  • GOST 19834.4-1979 Semiconductor radiating infra-red diodes. Methods of measurement of radiation power
  • GOST R 8.780-2012 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the energy, of the distribution of energy density, of the pulse duration and of the laser wavelength in the wavelength range from 0,3 to 2,0 µm
  • GOST R 8.723-2010 State system for ensuring the uniformity of measurements. Radiometers of the extreme ultraviolet radiation for measurements of radiance with the high spatial distribution in the wavelength range from 10-30 nm. Verification procedure
  • GOST 33441-2015 Vegetable oils. Determination of quality and safety by near infrared spectrometry
  • GOST R IEC 60793-1-44-2013 Optical fibres. Part 1-44. Measurement methods and test procedures. Cut-off wavelength
  • GOST R 55150-2012 Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods
  • GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry
  • GOST 32465-2013 Solid mineral fuel. Determination of sulfur by IR spectrometry
  • GOST R 54039-2010 Soil quality. Quick method for the determination of oil products by NIR spectroscopy
  • GOST R 54039-2010(2019) Soil quality. Quick method for the determination of oil products by NIR spectroscopy
  • GOST R 8.643-2008 State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure
  • GOST R 8.626-2006 State system for ensuring the uniformity of measurements. Saccharine confectionery. Infrared thermogravimetric method of moisture content determination
  • GOST R EN ISO 14596-2008 Petroleum products. Determination of sulfur content by method of wavelength-dispersive X-ray fluorescence spectrometry
  • GOST 19834.5-1980 Semiconductor emitting infra-red diodes. Method for measuring of radiation pulse switching times
  • GOST R 8.634-2007 State system for ensuring the uniformity of measurements. Oilseeds and oilseeds residues. Infrared thermogravimetric method of moisture content determination
  • GOST ISO 14596-2016 Petroleum products. Determination of sulfur content by method of wavelength-dispersive X-ray fluorescence spectrometry

Professional Standard - Agriculture, Infrared wavelength measurement

  • NY/T 2794-2015 Determination of amino acids content in peanut.Near-infrared method
  • NY/T 3105-2017 Determination of oil content in vegetable oils by near-infrared spectroscopy
  • GB 8570.6-1988 Determination of the content of liquid anhydrous ammonia oil by gravimetric and infrared spectroscopic methods

Taiwan Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • CNS 13779-1996 Measuring Methods for Infrared Emitting Diodes (IRED)(for Automation)
  • CNS 13806-1997 Method of Measurement for Emission Wavelength and Luminous Intensity of Epitaxial Wafers of Light Emitting Diodes
  • CNS 15057-2007 Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method
  • CNS 14139-1998 Measurement methods for the performance of transmitter and receiver modules used for wireless infrared communication

Professional Standard - Light Industry, Infrared wavelength measurement

  • QB/T 2812-2006 Paper-online determination of weight and moisture (The near infrared method)

Sichuan Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB51/T 1922-2014 Determination of Toluene Content in Gasoline by Infrared Spectroscopy
  • DB51/T 1694-2013 Determination of Methanol and Oxygen Content in Gasoline by Infrared Spectroscopy
  • DB51/T 2181-2016 Determination of Phosphorus in Gasoline by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • DB51/T 2042-2015 Determination of Carbon and Sulfur Content in Vanadium Aluminum Alloys High Frequency Induction Combustion-Infrared Absorption Method

European Committee for Standardization (CEN), Infrared wavelength measurement

  • prEN 238-1985 Liquid petroleum products; determination of the benzene content; infrared spectrometric method
  • EN ISO 24442:2022 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022)
  • EN ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011)
  • EN ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • EN 15948:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
  • EN ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007)
  • EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements

Hebei Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method
  • DB13/T 5029-2019 Determination of Methanol Content in Alcohol-Based Fuels - Gas Chromatography - Infrared Spectroscopy

Jiangsu Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB32/T 2269-2012 Non-destructive determination of cottonseed oil content by near-infrared spectroscopy
  • DB32/T 4340-2022 Asphalt Infrared Spectroscopy Similarity Recognition and SBS Content Testing Procedures

National Metrological Technical Specifications of the People's Republic of China, Infrared wavelength measurement

  • JJF 1107-2003 Calibration Specification for Infrared Thermometers for Measurement of Human Temperature

Korean Agency for Technology and Standards (KATS), Infrared wavelength measurement

  • KS E ISO 4689-3:2006 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS M 5506-2011 Testing method for infrared reflectance (from spectrophotometric date)
  • KS E ISO 4689-3:2017 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS M 5506-1986 Testing method for infrared reflectance (from spectrophotometric date)
  • KS E ISO 4689-3:2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
  • KS E ISO 9686-2011(2016) Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS E ISO 9686-2011(2021) Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS M ISO 7106:2002 Liquefied anhydrous ammonia for industrial use-Determination of oil content-Gravimetric and infra-red spectrometric methods
  • KS M ISO 7106:2017 Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and infra-red spectrometric methods
  • KS M ISO 11046:2005 Soil quality-Determination of mineral oil content-Method by infrared spectrometry and gas chromatographic method
  • KS M ISO 11046:2006 Soil quality-Determination of mineral oil content-Method by infrared spectrometry and gas chromatographic method
  • KS M ISO 7106-2017(2022) Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and infra-red spectrometric methods
  • KS D ISO 4935:2002 Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 4935-2002(2022) Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 22963-2010(2020) Titanium and titanium alloys-Determination of oxygen-Infrared method after fusion under inert gas
  • KS D ISO 4935-2002(2017) Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS C IEC 62642-2-4:2016 Alarm systems — Intrusion and hold-up systems — Part 2-4: Intrusion detectors — Combined passive infrared/Microwave detectors
  • KS C IEC 62642-2-4-2016(2021) Alarm systems — Intrusion and hold-up systems — Part 2-4: Intrusion detectors — Combined passive infrared/Microwave detectors
  • KS E ISO 9686:2011 Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS D ISO 11873:2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
  • KS D ISO 11873-2011(2016) Hardmetals-Determination of sulfur and carbon contents in cobalt metal powders-Infrared detection method
  • KS M ISO 14596:2009 Petroleum products-Determination of sulfur content- Wavelength-dispersive X-ray fluorescence spectrometry
  • KS D ISO 9556:2001 Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 9556:2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
  • KS D ISO 9556-2001(2016) Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
  • KS C IEC 62642-2-5:2017 Alarm systems — Intrusion and hold-up systems — Part 2-5: Intrusion detectors — Combined passive infrared/Ultrasonic
  • KS C IEC 62642-2-5-2017(2022) Alarm systems — Intrusion and hold-up systems — Part 2-5: Intrusion detectors — Combined passive infrared/Ultrasonic
  • KS D ISO 11873:2011 Hardmetals-Determination of sulfur and carbon contents in cobalt metal powders-Infrared detection method
  • KS M ISO 14596-2009(2019) Petroleum products-Determination of sulfur content- Wavelength-dispersive X-ray fluorescence spectrometry
  • KS D ISO 13902:2002 Steel and iron-Determination of high sulfur content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 10719-2006(2016) Steel and iron-Determination of non-combined carbon content-Infrared absorption method after combustion in an induction furnace
  • KS M ISO 22754:2020 Pulp and paper — Determination of the effective residual ink concentration(ERIC number) by infrared reflectance measurement

Zhejiang Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB33/T 989-2015 Determination of SBS Content in Modified Asphalt by Infrared Spectroscopy

Standard Association of Australia (SAA), Infrared wavelength measurement

  • AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
  • AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
  • AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
  • AS/NZS 4512:1999 Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics
  • AS 2879.7:1997(R2013)

工业和信息化部, Infrared wavelength measurement

  • YB/T 4726.6-2021 Determination of sulfur content in iron-containing dust and mud by infrared absorption method
  • YB/T 4726.8-2021 Determination of carbon content in iron dust mud by infrared absorption method
  • YB/T 4566.9-2016 Determination of vanadium nitride iron oxygen content by infrared absorption method
  • YB/T 4582.10-2017 Determination of carbon content in silicon ferronitride by infrared absorption method
  • YB/T 4582.4-2017 Determination of sulfur content in silicon iron nitride by infrared absorption method
  • YB/T 4566.7-2016 Determination of vanadium iron sulfur content by infrared absorption method
  • YB/T 4566.8-2016 Determination of carbon content of vanadium iron nitride by infrared absorption method
  • SJ/T 2658.14-2016 Measurement methods for semiconductor infrared emitting diodes Part 14: Junction temperature
  • YB/T 5316-2016 Determination of carbon content of calcium silicon alloy by high frequency combustion infrared absorption method
  • SJ/T 2658.15-2016 Measurement methods for semiconductor infrared emitting diodes Part 15: Thermal resistance
  • YB/T 4738-2019 Determination of oxygen content of calcium silicon alloy by inert gas fusion infrared absorption method
  • YB/T 4908.5-2021 Determination of carbon and sulfur content in vanadium-aluminum alloys High-frequency induction combustion-infrared absorption method

Professional Standard - Construction Industry, Infrared wavelength measurement

  • JGJ/T 277-2012 Technical specification for inspecting the defects of exterior walls cement coating of building with infrared thermography method

Yunnan Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB53/T 512-2013 Determination of Blending Uniformity of Secondary Re-cut Microwave Expanded Shredded Stems by Near Infrared Spectroscopy

Lithuanian Standards Office , Infrared wavelength measurement

  • LST EN 62129-2-2011 Calibration of wavelength/optical frequency measurement instruments -- Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011)
  • LST EN 238-1999 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • LST EN 238-1999/A1-2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • LST EN 60793-1-44-2011 Optical fibres -- Part 1-44: Measurement methods and test procedures - Cut-off wavelength (IEC 60793-1-44:2011)
  • LST EN 50131-2-4-2008 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
  • LST EN 14255-4-2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements

SE-SIS, Infrared wavelength measurement

  • SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers
  • SIS SS 02 81 45-1991 Determination ofoilin water — Infrared spectrophotometric method
  • SIS SS-EN 24 935-1992 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace

Indonesia Standards, Infrared wavelength measurement

  • SNI 06-2482-1991 Water, Test method for flouride content by spectrophotometer in a red alazaryn manuver
  • SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers

中华人民共和国环境保护部, Infrared wavelength measurement

  • GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

Professional Standard - Commodity Inspection, Infrared wavelength measurement

  • SN/T 3601-2013 Determination of total sulfur in graphite.Infrared absorption spectrometry
  • SN/T 3598-2013 Determination of sulfur content in pyrites ore.High frequency combustion with infrared absorption method
  • SN/T 4363-2015 Determination of Sulfur Content in Copper Concentrates High Frequency Combustion Infrared Absorption Method
  • SN/T 4366-2015 Determination of Sulfur Content in Gold Ore High Frequency Combustion Infrared Absorption Method
  • SN/T 2763.7-2014 Chemical analysis of nickel laterite ore.Part 7:determination of iron, nickel, silicon, aluminum, magnesium,calcium, titanium, manganese,copper and phosphorus content.Wavelength dispersive X-ray fluorescence spectrometry
  • SN/T 2638.3-2012 Determination of sulfur content in manganese ores for import and export.High temperature combustion infrared absorption method

Professional Standard - Meteorology, Infrared wavelength measurement

European Committee for Electrotechnical Standardization(CENELEC), Infrared wavelength measurement

  • EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
  • EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
  • EN 50131-2-5:2008 Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors

American Society for Testing and Materials (ASTM), Infrared wavelength measurement

  • ASTM E1685-20 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM UOP703-09 Carbon on Catalysts by Induction Furnance Combustion and Infrared Detection
  • ASTM F874-98(2003) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
  • ASTM F874-98 Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers

Professional Standard - Non-ferrous Metal, Infrared wavelength measurement

  • YS/T 1035-2015 Determination of carbon content in aluminum electrolyte.IR absorption spectrometry method
  • YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
  • YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
  • YS/T 426.7-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of carbon content.High frequency-infrared absorption method
  • YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Infrared wavelength measurement

  • ASHRAE OR-05-4-1-2005 Laboratory Infrared Thermography Technique for Window Surface Temerature Measurements

KR-KS, Infrared wavelength measurement

  • KS E ISO 4689-3-2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
  • KS E ISO 4689-3-2017 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS M ISO 7106-2017 Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and infra-red spectrometric methods
  • KS M ISO 11046-2005 Soil quality-Determination of mineral oil content-Method by infrared spectrometry and gas chromatographic method
  • KS C IEC 62642-2-4-2016 Alarm systems — Intrusion and hold-up systems — Part 2-4: Intrusion detectors — Combined passive infrared/Microwave detectors
  • KS D ISO 11873-2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
  • KS D ISO 9556-2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
  • KS C IEC 62642-2-5-2017 Alarm systems — Intrusion and hold-up systems — Part 2-5: Intrusion detectors — Combined passive infrared/Ultrasonic
  • KS D ISO 7524-2022 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
  • KS D ISO 7526-2022 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
  • KS M ISO 22754-2020 Pulp and paper — Determination of the effective residual ink concentration(ERIC number) by infrared reflectance measurement
  • KS M ISO 14597-2003(2023)

Henan Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB41/T 1050-2015 Ferrosilicon Chemical Analysis Method Infrared Absorption Method for Determination of Sulfur Content
  • DB41/T 1569-2018 Determination of Fixed Carbon Content in Graphite Ore High Frequency Combustion Infrared Absorption Method

Shandong Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB37/T 2651-2015 Determination of Methylal Content in Motor Gasoline by Infrared Spectroscopy
  • DB37/T 4417-2021 Determination of SBR content in SBR modified emulsified asphalt (infrared spectroscopy)
  • DB37/T 2977-2017 Technical Regulations for Determination of SBS Modifier Content in Road Asphalt (Infrared Spectroscopy)

Jilin Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB22/T 3148-2020 Detection of SBS Modifier Content in Modified Asphalt by Infrared Spectroscopy

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Infrared wavelength measurement

  • IEEE 347-1972 STANDARD METHOD OF MEASURING RECORDED FLUX OF MAGNETIC SOUND RECORDS AT MEDIUM WAVELENGTHS

CZ-CSN, Infrared wavelength measurement

  • CSN 36 7109-1984 Fixed broadcasting transmitters in the LW and MW bands, automated Principal parameters, generál technical requirements, methods of measurement
  • CSN 58 8785-1994 Methods of test for fats and oils Determination of content of isolated trans-unsaturated compounds by infrared spectroscopy

PT-IPQ, Infrared wavelength measurement

  • NP EN ISO 14596:2001 Petroleum products Determination of sulfur content Wavelength-dispersive X-ray fluorescence spectrometry(ISO 14593:1998)

ZA-SANS, Infrared wavelength measurement

  • SANS 60793-1-44:2001 Optical fibres Part 1-44: Measurement methods and test procedures - Cut-off wavelength

未注明发布机构, Infrared wavelength measurement

  • DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
  • BS EN ISO 9556:2001(2009) Steel and iron — Determination oftotal carbon content — Infrared absorption method after combustion in an induction furnace
  • BS EN 50131-2-5:2008(2014) Alarm systems – Intrusion and hold - up systems –– Part 2 - 5 : Requirements for combined passive infrared and ultrasonic detectors

VN-TCVN, Infrared wavelength measurement

  • TCVN 4654-3-2009 Iron ores.Determination of sulphur content.Part 3: Combustion/infrared method
  • TCVN 7725-2007 Ambient air.Determination of carbon monoxide.Non-dispersive infrared spectrometric method
  • TCVN 2617-2008 Liquefied anhydrous ammonia for industrial use.Determination of oil content.Gravimetric and infrared spectrometric methods
  • TCVN 7369-2004 Soils quality.Determination of mineral oil content.Method by infrared spectrometry and gas chromatographic method
  • TCVN 6678-2000 Cigarettes.Determination of carbon monooxide in the vapour phase of cigarettes smoke.NDIR method

Professional Standard - Chemical Industry, Infrared wavelength measurement

  • HG/T 5077-2016 Optical functional films.Measuring method of the near infrared spectral transmittance

AENOR, Infrared wavelength measurement

  • UNE-EN 238:1996 LIQUID PETROLEUM PRODUCTS. PETROL. DETERMIANTION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY.
  • UNE-EN 238/A1:2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • UNE-EN 50131-2-4:2008 Alarm systems- Intrusion and hold-up systems- Part 2-4: Requirements for combined passive infrared and microwave detectors
  • UNE-EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Infrared wavelength measurement

  • ASHRAE AC-02-2-3-2002 Surface Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements
  • ASHRAE SA-96-6-1-1996 Surface Temperatures of Insulated Glazing Units: Infrared Thermography Laboratory Measurements
  • ASHRAE SA-96-6-2-1996 Surface Temperature Measurement of Insulating Glass Units Using Infrared Thermography

Tianjin Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB12/T 347-2007 Near-infrared rapid detection method of crude protein content in wheat and corn

海关总署, Infrared wavelength measurement

  • SN/T 5347.1-2021 Determination of carbon and sulfur content in chromium ore by high frequency infrared absorption method
  • SN/T 5250-2020 Determination of sulfur content in mineral products by high-frequency combustion infrared absorption method

交通运输部, Infrared wavelength measurement

  • JT/T 1329-2020 Test method for modifier content of SBS modified asphalt by infrared spectroscopy

Society of Automotive Engineers (SAE), Infrared wavelength measurement

  • SAE J919-2013 Sound Measurement Off-Road Work Machines Operator Singular Type

US-FCR, Infrared wavelength measurement

Professional Standard - Customs, Infrared wavelength measurement

  • HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

Jiangxi Provincial Standard of the People's Republic of China, Infrared wavelength measurement

  • DB36/T 1131-2019 Determination of SBS and SBR Modifier Content in Modified Asphalt by Infrared Spectroscopy

Professional Standard - Petrochemical Industry, Infrared wavelength measurement

  • SH/T 0797-2007 Standard test method for determination of benzene in spark-ignition engine fuels using mid infrared spectroscopy

TH-TISI, Infrared wavelength measurement

  • TIS 1969-2000 Liquidfied anhydrous amnonia for industrial use.determination of oil content.gravimetric and infra-red spectrometric methods

TIA - Telecommunications Industry Association, Infrared wavelength measurement

  • 455-27A-1986 Fibers@ Measuring Outside (Uncoated) Diameter of Optical Waveguide (*NOT CURRENT DOCUMENT)
  • TIA-455-80A-1996 FOTP-80 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
  • TIA-455-8-2000(2008) FOTP-80 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power

Professional Standard - Electricity, Infrared wavelength measurement

  • DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method

国家能源局, Infrared wavelength measurement

  • SH/T 1816-2017 Determination of methyl (comonomer) content in plastic polyethylene by infrared spectroscopy

IT-UNI, Infrared wavelength measurement





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved