ZH
RU
ES

Bulk ratio measurement

Bulk ratio measurement, Total:500 items.

In the international standard classification, Bulk ratio measurement involves: Waxes, bituminous materials and other petroleum products, Astronomy. Geodesy. Geography, Fertilizers, Testing of metals, Measurement of fluid flow, Packaging materials and accessories, Products of the chemical industry, Soil quality. Pedology, Cutting tools, Analytical chemistry, Document imaging applications, Air quality, Wastes, Construction materials, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Road vehicles in general, Paints and varnishes, Explosion protection, Powder metallurgy, Nuclear energy engineering, Rubber and plastics products, Cereals, pulses and derived products, Ceramics, Fuels, Coals, Radiation measurements, Inorganic chemicals, Milk and milk products, Raw materials for rubber and plastics, Paper and board, Paper products, Textile fibres, Non-metalliferous minerals, Electrical wires and cables, Particle size analysis. Sieving, Microbiology, Paint ingredients, Non-textile floor coverings, Road engineering, Measurement of volume, mass, density, viscosity, Products of non-ferrous metals, Continuous handling equipment, Optics and optical measurements, Refractories, Cinematography, Tea. Coffee. Cocoa, Metalliferous minerals, Packaging and distribution of goods in general, Equipment for petroleum and natural gas industries, Leather technology, Non-destructive testing, Mining and quarrying, Storage equipment, Thermodynamics and temperature measurements, Data storage devices, Magnetic materials, Plastics, Mechanical testing, Construction industry, Buildings, Materials for aerospace construction, Welding, brazing and soldering, Aids for disabled or handicapped persons, Vacuum technology, Pulps, Linear and angular measurements, Cellular materials.

Korean Agency for Technology and Standards (KATS), Bulk ratio measurement

KS F 2353-2010(2017) Standard test method for specific bulk gravity of compacted asphalt mixtures
KS B ISO 1070:2003 Liquid flow measurement in open channels－Slope-area method
KS X ISO 6342-2007(2022) Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
KS X ISO 6342-2007(2017) Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS L 6509-2001 Testing method for bulk density of artificial abrasives
KS L 6509-1974 Testing method for bulk density of artificial abrasives
KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS E ISO 567-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS F 2505-2017(2022) Methods of test for bulk density of aggregates and solid content in aggregates
KS A ISO 9161:2009 Uranium dioxide powder-Determination of apparent density and tap density
KS T 1303-2022 Determination of ratio of spatial volume to total packaging volume for commercial packaging(consumer packaging)
KS A ISO 8687:2003 Cinematography－Signal－to－noise ratio of 8 mm type S, 16 mm and 35 mm variable－area photographic sound records－Method of measurement
KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS F 2505-2002 Methods of test for bulk density of aggregates and solid content in aggregates
KS F 2505-1982 Methods of test for bulk density of aggregates and solid content in aggregates
KS L 4008-2006 Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS L 4008-1981 Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS M ISO 11646-2017(2022) Leather－Measurement of area
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M ISO 3233-2002(2012) Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS B OIMLR 139-1-2006 Instruments for measuring the areas of leathers
KS M ISO 11646:2007 Leather－Measurement of area
KS M ISO 11646:2017 Leather－Measurement of area
KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
KS C IEC 60404-13-2002(2017) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
KS A 0611-1997(2022) Method of measurement by variable area flowmeters
KS A 0611-1982 Method of measurement by variable area flowmeters
KS C IEC 60404-13-2002(2022) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS B 0892-2016 Method of deposition rate measurement
KS B 0892-1985 Method of deposition rate measurement
KS B ISO 1607-1-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)

IT-UNI, Bulk ratio measurement

UNI 7549-P4-1976
UNI EN 15188-2021 Determination of the spontaneous ignition behaviour of dust accumulations
UNI 4870-1961
UNI 5824-1979

Jilin Provincial Standard of the People's Republic of China, Bulk ratio measurement

DB22/T 3210-2020 Operating procedures for volume measurement of open-air grain piles

Lithuanian Standards Office , Bulk ratio measurement

LST EN 1237-2002 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
LST EN 15188-2007 Determination of the spontaneous ignition behaviour of dust accumulations
LST EN 15188-2021 Determination of the spontaneous ignition behaviour of dust accumulations
LST ISO 6782:1995 Aggregates for concrete. Determination of bulk density
LST EN 725-9-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
LST EN ISO 12625-3:2005 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005)
LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
LST EN 1236-2002 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
LST ISO 8967:2006 Dried milk and dried milk products - Determination of bulk density (identical ISO 8967:2005)
LST EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992)
LST EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
LST EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)

American Society for Testing and Materials (ASTM), Bulk ratio measurement

ASTM D5057-90(1996) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D5057-90(2006) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D5057-90(2001) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM C97/C97M-09 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D5057-10 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D5057-17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D2726/D2726M-21 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D2726-08 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726-09 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726/D2726M-19 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D2726/D2726M-17 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
ASTM C830-00(2023) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM E910-18 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance
ASTM C29/C29M-07 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bulk ratio measurement

GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
GB/T 16913.3-1997 Methods of dust character test--Part 3: Determination of bulk density--Natural bulk method
GB 6286-1986 Method for Determination of Bulk Density of Molecular Sieve
GB/T 6286-1986 Determination of bulk density for molecular sieve
GB/T 11847-2008 Determination of specific surface area of uranium dioxide power by BET capacity method
GB/T 207-1963 Method of determination for specific surface of cement
GB/T 31522-2015 Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<下标3>Sn composite superconducting wires
GB/T 16698-1996 Measurment of emission rate of α particle. Method for large area proportional counter
GB/T 16698-2008 Measurement of emission rate of α particle. Method for large area proportional counter
GB/T 23771-2009 Determination of bulk density for inorganic chemical products
GB/T 14853.4-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of mass strength
GB/T 6646.4-1986 Method for specific surface area of chrysotile asbestos
GB/T 21877-2015 Dyestuffs and intermediate of dyes.Determination of tapping density
GB/T 21877-2008 Dyestuffs and intermediate of dyes.Determination of tapping density
GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
GB/T 8995-1988 In-core instrumentation for neutron fluence rate measurements in nuclear reactors
GB/T 8995-2008 In-core instrumentation for neutron fluence rate measurements in nuclear reactors
GB/T 3780.5-2002 Carbon black used in rubber products--Determination of specific surface area--CTAB test method
GB/T 8074-1987 Testing method for specific surface of cement--Blaine method
GB/T 8074-2008 Testing method for specific surface of cement.Blaine method
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 6646.4 COR-1986 Method for specific surface area of chrysotile asbestos COR
GB/T 20316.2-2006 Abrasive grains. Determination of bulk density. Part 2: Microgrits
GB/T 7166-1987 In-core temperature or primary envelope temperature measurements in nuclear power reactor--Characteristics and test methods
GB 7166-1987 Characteristics and test methods of temperature measurement in nuclear power reactor core or reactor main cladding
GB/T 14853.4-2013 Rubber compounding ingredients.Pelletized carbon black.Part 4:Determination of mass strength
GB/T 20316.1-2009 Abrasive grains.Determiantaion of bulk density.Part 1:Macrogrits
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 13390-2008 Metallic powder.Determination of the specific surface area.Method of nitrogen adsorption
GB/T 3780.5-2008 Carbon black. Part 5: Determination of specific surface area. CTAB test method
GB/T 13390-1992 Metallic powder--Determination of the specific surface area--Method of nitrogen adsorption
GB/T 10322.9-2023 Determination of specific surface area of iron ore by Breton gas permeability method
GB/T 17288-1998 Liquid hydrocarbons--Volumetric measurement by displacement meter systems other than dispensing pumps
GB/T 17288-2009 Liquid hydrocarbons.Volumetric measurement by displacement meter systems
GB/T 13632-1992 Measurements for monitoring adequate cooling within the core of pressurized light water reactors
GB/T 11847-1989 Determination of specific surface area of uranium dioxide powder by multipoint BET method
GB/T 10322.8-2009 Iron ores.Single-point determination of specific surface area.Nitrogen adsorption method
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB/T 13632.2-2006 Measurements for monitoring adequate cooling within the core of pressurized light water reactors - Part 2: Instrumentation requirements during cold shutdown

Danish Standards Foundation, Bulk ratio measurement

DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
DS/EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations
DS/EN 15188:2021 Determination of the spontaneous ignition behaviour of dust accumulations
DS/EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
DS/EN ISO 7837:2000 Fertilizeres - Determination of bulk density (loose) of fine-grained fertilizers
DS/EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
DS/EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method
DS/EN ISO 11646:1999 Leather - Measurement of area
DS 13000:2007 Measurement of buildings, concepts of area and volume
DS/EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
DS/EN 1015-6/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
DS/EN 1015-6:1999 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar

International Organization for Standardization (ISO), Bulk ratio measurement

ISO 1070:1992 Liquid flow measurement in open channels; slope-area method
ISO 9136:1989 Abrasive macrograins; determination of bulk density
ISO 5311:1983 Fertilizers — Determination of bulk density (tapped)
ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
ISO 6782:1982 Aggregates for concrete; Determination of bulk density
ISO/CD 18708:2023 Solid recovered fuels — Determination of bulk density
ISO 23604:2022 Method of determining specific surface area of coal
ISO 8967:2005 | IDF 134:2005 Dried milk and dried milk products — Determination of bulk density
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO 7971-3:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method
ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2: Microgrits
ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
ISO 12800:2003 Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 8687:1987 Cinematography; Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records; Method of measurement
ISO 12800:2017 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 9161:2004 Uranium dioxide powder - Determination of apparent density and tap density
ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
ISO 6421:2012 Hydrometry - Methods for assessment of reservoir sedimentation
ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 11646:2014 Leather - Measurement of area
ISO 11646:2014 | IULTCS/IUP 32 Leather — Measurement of area
ISO 11646:1993 | IULTCS/IUP 32 Leather — Measurement of area
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 13317-3:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique
ISO 2715:2017 Liquid hydrocarbons. Volumetric measurement by turbine flowmeter. Volumetric measurement by turbine meter systems
ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
ISO 11646:1993 Leather; measurement of area
ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement
ISO 2714:2017 Liquid hydrocarbons - Volumetric measurement by displacement meter
ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption

VN-TCVN, Bulk ratio measurement

TCVN 4778-2009 Coal.Determination of bulk density
TCVN 4778-2015 Coal - Determination of bulk density for the use in charging of coke ovens
TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities
TCVN 1284-1986 Sawn wood.Cubing table

Group Standards of the People's Republic of China, Bulk ratio measurement

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/CISA 099-2021 Determination of apparent density,bulk density and porosity for iron tailings

German Institute for Standardization, Bulk ratio measurement

DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
DIN EN 15188:2021-07 Determination of the spontaneous ignition behaviour of dust accumulations; German version EN 15188:2020 / Note: DIN EN 15188 (2007-11) remains valid alongside this standard until 2021-12-31.
DIN EN 15761:2022-01 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021 / Note: Date of issue 2021-12-10*Intended as replacement for DIN EN 15761 (2010-04).
DIN EN ISO 17828:2016-05 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
DIN CEN/TS 15401:2010-09*DIN SPEC 1122:2010-09 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density; German version EN 15761:2009 / Note: To be replaced by DIN EN 15761 (2022-01).
DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
DIN EN 1237:1995-08 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995
DIN EN ISO 7971-3:2020-02 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019); German version EN ISO 7971-3:2019
DIN 5033-3:1992 Colorimetry; colorimetric measures
DIN EN 1236:1995-08 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995
DIN EN ISO 12800:2019-09 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German version EN ISO 12800:2019
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
DIN EN ISO 7837:2000-06 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN ISO 9136-2:2000-07 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
DIN EN ISO 12800:2018 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German and English version prEN ISO 12800:2018
DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
DIN EN ISO 11646:2014-07 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
DIN EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN ISO 11646:1998 Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998
DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
DIN EN IEC 60404-13:2020-06 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018); German version EN IEC 60404-13:2018 / Note: DIN EN 60404-13 (2008-05) remains valid alongside this...
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN EN ISO 17892-2:2015-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016

RU-GOST R, Bulk ratio measurement

GOST 27801-1993 Alumina. Method for the determination of bulk density
GOST ISO 7971-3-2021 Cereals. Determination of bulk density, called mass per hectolitre. Part 3. Routine method
GOST ISO 7971-3-2013 Determination of bulk density, called mass per hektolitre. Part 3. Routine method
GOST R 55450-2013 Organic fertilizers. Method for determination of bulk density
GOST 13144-1979 Graphite. Methods for the determination of specific surface
GOST 10898.5-1984 Ion-exchange resins. Determination of specific surface
GOST ISO 8460-2015 IInstant coffee. Determination of free-flow and compacted bulk densities
GOST R ISO 11646-2017 Leather. Measurement of area
GOST 25732-1988 Iron and manganese ores, concentrates, agglomerates and pellets. Methods for determination of real, middle, bulk density and porosity

AENOR, Bulk ratio measurement

UNE 32205:1984 COKE. DETERMINATION OF BULK DENSITY.
UNE-EN 15188:2008 Determination of the spontaneous ignition behaviour of dust accumulations
UNE-EN 1236:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE).
UNE-EN 1237:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (TAPPED).
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.
UNE-EN ISO 7837:2001 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE) OF FINE-GRAINED FERTILIZERS. (ISO 7837:1992)
UNE 53137:1977 PLASTICS. PVC RESINS. DETERMINATION OF THE COMPACTED APPARENT BULK DENSITY
UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
UNE-EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
UNE 59531:2014 Footwear. Area measurements in soles
UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method

British Standards Institution (BSI), Bulk ratio measurement

BS EN ISO 11272:2017 Tracked Changes. Soil quality. Determination of dry bulk density
BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density
BS ISO 23604:2022 Method of determining specific surface area of coal
BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
BS ISO 8967:2005 Dried milk and dried milk products. Determination of bulk density
BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
19/30389496 DC BS EN 15188. Determination of the spontaneous ignition behaviour of dust accumulations
BS ISO 1013:2020 Coke. Determination of bulk density in a large container
21/30436585 DC BS EN 15761. Pre-shaped growing media. Determination of the dimensions measured and bulk density
DD CEN/TS 15401:2006 Solid recovered fuels — Methods for the determination of bulk density
21/30397451 DC BS ISO 567. Coke. Determination of bulk density in a small container
21/30425566 DC BS ISO 23604. Method of determining specific surface area of coal
BS EN ISO 12800:2019 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
BS EN ISO 7971-3:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Routine method
BS ISO 567:2021 Tracked Changes. Coke. Determination of bulk density in a small container
BS 5552:1978 Code of practice for in-core instrumentation for neutron fluence rate (flux) measurements in power reactors
BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
BS ISO 15100:2000 Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
BS EN ISO 11646:1998 Leather - Measurement of area
BS EN ISO 11646:2014 Leather. Measurement of area
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
BS EN 14702-1:2006(2007) Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
BS EN IEC 60404-13:2018 Tracked Changes. Magnetic materials. Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
BS ISO 1070:2018 Hydrometry. Slope-area method
BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 17190-9:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of flow rate and bulk density
BS 4359-2:1982 Determination of the specific surface area of powders - Recommended air permeability methods

Association Francaise de Normalisation, Bulk ratio measurement

NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
NF ISO 3852:1989 Minerais de fer - Détermination de la masse volumique apparente
NF EN 15188:2020 Détermination de l'aptitude à l'auto-inflammation des accumulations de poussières
NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
NF EN ISO 10545-3:2018 Carreaux et dalles céramiques - Partie 3 : détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale
NF EN ISO 17828:2016 Biocombustibles solides - Détermination de la masse volumique apparente
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF EN ISO 845:2009 Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente
NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF EN ISO 29470:2020 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
NF EN 1602:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
NF EN 15761:2010 Supports de culture préformés - Détermination de la longueur, de la largeur, de la hauteur, du volume et de la masse volumique apparente
NF ISO 15100:2001 Plastiques - Fibres de renfort - Fils coupés - Détermination de la masse volumique apparente
NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF M60-456*NF EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
NF EN ISO 9161:2021 Poudre de dioxyde d'uranium - Détermination de la masse volumique apparente et de la masse volumique après tassement
NF EN ISO 3923-1:2018 Poudres métalliques - Détermination de la masse volumique apparente - Partie 1 : méthode de l'entonnoir
NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
NF EN ISO 13927:2015 Plastiques - Essai simple pour la détermination du débit calorifique au moyen d'un radiateur conique et d'une sonde à thermopile
NF G52-021:2000 Leather - Measurement of area.
NF G52-021*NF EN ISO 11646:2014 Leather - Measurement of area
FD ISO/TR 16153:2023 Détermination de l'incertitude de mesure pour les mesurages volumétriques des appareils volumétriques à piston au moyen de la méthode photométrique
NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
NF EN ISO 61:1999 Matières plastiques - Détermination de la masse volumique apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné
NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
NF EN ISO 4590:2016 Plastiques alvéolaires rigides - Détermination du pourcentage volumique de cellules ouvertes et de cellules fermées

CZ-CSN, Bulk ratio measurement

CSN 44 1367-1963 Determination of the bulk density of coke
CSN 72 2114-1970 Determination of specific surface of cement
CSN 44 1818-1987 Iron ore concentrates, Method of determination of specific surface
CSN IEC 911:1993 Measurements for monitoring adequate cooling within the core of pressurized light water reactors
CSN IEC 737:1994 In-core temperature or primary envelope temperature measurements in nuclear power reactor. Characteristics and test methods
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities

RO-ASRO, Bulk ratio measurement

STAS SR ISO 3953:1993 Metallic powders. Determination of tap density
SR ISO 4622:1996 Paints and varnishes - Pressure test for stackability
STAS 4223/2-1970 CEMENT Determination of specific surface by means of the flowmeter
STAS SR 12271-19-1996 Uranium dioxide. Determination of apparent density and tap density
STAS 5875-1980 PLASTICS Determination of bulk density of moulding mixtures that can be poured from a funnel

YU-JUS, Bulk ratio measurement

JUS U.M1.009-1993 Concrete - Determination of bulk density of concrete
JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
JUS H.B8.314-1977 Sodium and potassium silicates for industrial use. Determination of density at 20 °C of products in solution. Method using density hidrometar and method using pyknometer

Taiwan Provincial Standard of the People's Republic of China, Bulk ratio measurement

CNS 5136-1980 Method of Measurement for Blocking Point of Adhesives
CNS 10945-1984 Method of Test for Cubic Meter Weight of Crushed Bituminous Coal
CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete
CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption
CNS 12706-1990 Method of Test for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

Standard Association of Australia （SAA）, Bulk ratio measurement

AS 2879.8:2000(R2013)
AS 1141.4:1996 Methods for sampling and testing aggregates Method 4: Bulk density of aggregate
AS 1141.4:2000(R2013)
AS/NZS 2891.9.3:2014

Professional Standard - Hygiene , Bulk ratio measurement

WS/T 123-1999 Determination of hematocrit

The American Road & Transportation Builders Association, Bulk ratio measurement

AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
AASHTO T 298-1999 Standard Method of Test for High-Strain Dynamic Testing of Piles
AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

IN-BIS, Bulk ratio measurement

IS 7190-1974
IS 13897-1993 In-core instrumentation for neutron fluence rate (flux ) measurements in power reactors
IS 13858-1993 Instant tea - determination of free-flow and compacted bulk densities
IS 5534-1969
IS 5842-1970
IS 8425-1977
IS 13665-1993 Sedimentation in reservoirs. Method of measurement

AT-ON, Bulk ratio measurement

OENORM EN 15188-2021 Determination of the spontaneous ignition behaviour of dust accumulations

CH-SNV, Bulk ratio measurement

SN EN 15188-2021 Determination of the spontaneous ignition behaviour of dust accumulations
SEV 1003-1959

PL-PKN, Bulk ratio measurement

PN-EN 15188-2021-05 E Determination of the spontaneous ignition behaviour of dust accumulations
PN Z04002 Arkusz 07-1974 Air purity protection Tests of dust physical properties Determination of cone angle of heaped dust
PN C04422-1968 Inorganic pigment* for paints Determination ol specific area
PN C89652-1987 Porous materials and powders The BET method for the determination of the specific surface area
PN C04404-11-1988 Pigments for paints General methods of test Determination of the specific surface area and texture

CEN - European Committee for Standardization, Bulk ratio measurement

PREN 15188-2019 Determination of the spontaneous ignition behaviour of dust accumulations
PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
PD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density

Japanese Industrial Standards Committee (JISC), Bulk ratio measurement

JIS Z 2512:2006 Metallic powders -- Determination of tap density
JIS H 7308:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS R 6130:2002 Testing method for bulk density of artificial abrasives
JIS H 7503:2003 Method for measurement of cavity volume fraction of superplastically deformed metallic materials
JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS Z 8837:2018 Determination of density by volumetric displacement -- Skeleton density by gas pycnometry
JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method

国家市场监督管理总局、中国国家标准化管理委员会, Bulk ratio measurement

GB/T 6286-2021 Determination of bulk density for molecular sieve
GB/T 40549-2021 Determination of bulk density of coke in a small container
GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging

ES-UNE, Bulk ratio measurement

UNE-EN 15188:2021 Determination of the spontaneous ignition behaviour of dust accumulations
UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
UNE-EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015)
UNE-EN ISO 7971-3:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019)
UNE-EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017) (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)
UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)
UNE-EN ISO 17892-2:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)

未注明发布机构, Bulk ratio measurement

BS EN 1237:1995(2010) Fertilizers — Determination of bulk density (tapped)
BS EN 1236:1995(2010) Fertilizers — Determination of bulk density (loose)
BS ISO 8967:2005(2006) Dried milk and dried milk products — Determination of bulk density
BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers
NB 20490-2018 Monitoring requirements for activated corrosion product deposition source items during shutdown and maintenance of pressurized water reactor nuclear power plants
BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
DIN EN 384:2004 Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density
BS ISO 3852:2007(2008) Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
BS 3482-10:1991(1999) Methods of test for Desiccants — Part 10 : Determination of bulk density (dry basis)
DIN EN ISO 7971-3:2019 Cereals – Determination of bulk density, so-called mass per hectoliter – Part 3: Routine procedures (ISO 7971-3:2019)
BS 6404-13:1996(1999) Magnetic materials — Part 13 : Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS EN 1094-4:1995(1999) Insulating refractory products — Part 4 : Determination of bulk density and true porosity
DIN EN 12390-7:2019 Testing of hardened concrete – Part 7: Bulk density of hardened concrete

Professional Standard - Chemical Industry, Bulk ratio measurement

HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts
HG/T 2347.8-1992 Determination of specific surface area of γ·Fe(index 2)O(index 3)magnetic powder

Professional Standard - Machinery, Bulk ratio measurement

JB/T 3584-1999 Super-hard abrasive Method for determining bulk density
JB/T 3584-2012 Superabrasive.Testing method of bulk density
JB/T 7984.2-1999 Conventional abrasive.Determination of bulk density of macrogrits
JB/T 9014.7-1999 Continuous handling equipment.Loose bulk material.Determination of accumulated angle
JB/T 6260-1992 Volumetric fuel consumption meter

American National Standards Institute （ANSI), Bulk ratio measurement

ANSI/ANS 19.3.4-2002 Determination of Thermal Energy Deposition Rates in Nuclear Reactors
ANSI/TAPPI T268 om-2013 Weight-volume measurement of pulpwood

Professional Standard - Hydroelectric Power, Bulk ratio measurement

SD 174-1985 Slope-area method determination specification

CENELEC - European Committee for Electrotechnical Standardization, Bulk ratio measurement

EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet

BE-NBN, Bulk ratio measurement

NBN I-1008-1969

ANS - American Nuclear Society, Bulk ratio measurement

19.3.4-2002 The Determination of Thermal Energy Deposition Rates in Nuclear Reactors
19.3.4-1976 Determination of Thermal Energy Deposition Rates in Nuclear Reactors

National Metrological Verification Regulations of the People's Republic of China, Bulk ratio measurement

JJG(机械) 3-1990 Verification Regulations for Abrasive Bulk Density Meter

National Metrological Technical Specifications of the People's Republic of China, Bulk ratio measurement

JJF(机械) 1076-2021 Calibration specification for abrasive bulk density tester
JJF(机械) 045-2009 Calibration specification for abrasive bulk density tester
JJF(机械)1076-2021
JJF 1117.1-2012 Measurement Comparison of Chemical Quantity

European Committee for Standardization (CEN), Bulk ratio measurement

CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)
EN 1237:1995 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)

European Committee for Electrotechnical Standardization（CENELEC）, Bulk ratio measurement

EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

AASHTO - American Association of State Highway and Transportation Officials, Bulk ratio measurement

T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T19/T19M-2000 "Standard Method of Test for Bulk Density (""Unit Weight"") and Voids in Aggregate (Twentieth Edition; ASTM C29/C29M-97)"

International Electrotechnical Commission (IEC), Bulk ratio measurement

IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires
IEC 60568:1977 Incore instrumentation for the measurement of fluence in power reactors
IEC 61501:1998 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
IEC 60911:1987 Measurements for monitoring adequate cooling within the core of pressurized light water reactors
IEC 61343:1996 Nuclear reactor instrumentation - Boiling light water reactors (BWR) - Measurements in the reactor vessel for monitoring adequate cooling within the core

International Dairy Federation (IDF), Bulk ratio measurement

IDF 134-2005 Dried milk and dried milk products - Determination of bulk density

Military Standard of the People's Republic of China-General Armament Department, Bulk ratio measurement

GJB 771.101-1989 Gunpowder Performance Test Methods Determination of Bulk Density
GJB 772.114-1994 Test methods for explosives - Dry method for determination of bulk density
GJB 772.113-1994 Test methods for explosives - Wet method for determination of bulk density
GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density
GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method

KR-KS, Bulk ratio measurement

KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS A ISO 8687-2003(2023) Cinematography - Signal-to-noise ratio of 8mm type S, 16mm and 35mm variable-area photographic Sound records - Method of measurement
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement

PT-IPQ, Bulk ratio measurement

E 209-1967
NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)

Professional Standard - Energy, Bulk ratio measurement

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst
NB/T 20195-2012 Reactor thermal power measurement procedure for reactor core in pressurized water nuclear power plant

GOSTR, Bulk ratio measurement

GOST 34260-2017 Glass fiber. Chopped strands. Determination of bulk density

TR-TSE, Bulk ratio measurement

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES

NL-NEN, Bulk ratio measurement

NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

国家能源局, Bulk ratio measurement

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution
NB/T 20490-2018 Monitoring requirements for activated corrosion product deposition source items during shutdown and maintenance of pressurized water reactor nuclear power plants
SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method
SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping

SE-SIS, Bulk ratio measurement

SIS SS IEC 568:1981 Nuclear instrumentation - In-core instrumentation for neutron fluence r?te (flux) measurements in power reactors
SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio
SIS SS IEC 737:1984 Nuclear instrumentation — In-core temperature or primary envelope temperature measurements in nuclear power reactors — Characteristics and test methods
SIS SS IEC 911:1988 Nuclear instrumentation — Measurements for monitoring adequate cooling within the core of pressurized light water reactors
SIS SS 02 10 51-1987 Area and volume of buildings - Terminology and measurement
SIS SS 02 10 52-1989 Area and volume of buildings -Terminology and measurement

HU-MSZT, Bulk ratio measurement

MSZ 7779-1971

Professional Standard - Agriculture, Bulk ratio measurement

126药典四部-2020 0900 Property inspection method 0991 Specific surface area measurement method
GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents

Professional Standard - Military and Civilian Products, Bulk ratio measurement

WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Bulk ratio measurement

GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method
GJB 5891.2-2006 Test method of loading material for initiating explosive device Part 2: Measurement of bulk density

Professional Standard - Commodity Inspection, Bulk ratio measurement

SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bulk ratio measurement

GB/T 3780.5-2017 Carbon black—Part5：Determination of specific surface area—CTAB test method
GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing

Indonesia Standards, Bulk ratio measurement

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption
SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities

Association of German Mechanical Engineers, Bulk ratio measurement

VDI 3561-1973 Operating test cyles for performance comparison and for the commissioning of stacker-cranes

Electronic Components, Assemblies and Materials Association, Bulk ratio measurement

ECA TEP105-10-1987 Contrast Measurement of CRT?s

Professional Standard - Nuclear Industry, Bulk ratio measurement

EJ/T 493-1989 300MW PWR Nuclear Power Plant Reactor Core Neutron Flux Measurement System Piping Design Regulations

GM Europe, Bulk ratio measurement

GME 8742-2007 Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14711.)

工业和信息化部, Bulk ratio measurement

QB/T 5089-2017 Measuring leather area

Professional Standard - Non-ferrous Metal, Bulk ratio measurement

YS/T 438.4-2001 Methods for physical performance determination of sandy alumina.Determination of specific surface area.B.E.T. method

(U.S.) Ford Automotive Standards, Bulk ratio measurement

FORD FLTM BP 010-1-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA "N" RUBBER AFTER OIL IMMERSION

ECIA - Electronic Components Industry Association, Bulk ratio measurement

TEP105-10-1987 Contrast Measurement of CRT?s

Military Standards (MIL-STD), Bulk ratio measurement

DOD A-A-53890-1989 PIPET, VOLUMETRIC

FI-SFS, Bulk ratio measurement

SFS 4283-1979