ZH
RU
ES

Specific Surface Meter Parameters

Specific Surface Meter Parameters, Total:324 items.

In the international standard classification, Specific Surface Meter Parameters involves: Optics and optical measurements, Machine tools, Equipment for the chemical industry, Optical equipment, Linear and angular measurements, Gears, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Industrial automation systems, Measurement of fluid flow, Equipment for the metallurgical industry, Analytical chemistry, Vacuum technology, Vocabularies, Wood technology processes, Measurement of volume, mass, density, viscosity, IT terminal and other peripheral equipment, Applications of information technology, Equipment for petroleum and natural gas industries, Chipless working equipment, Mining and quarrying, Testing of metals, Metalliferous minerals, Wood-based panels, Nuclear energy engineering, Railway rolling stock, Commercial vehicles, Wood, sawlogs and sawn timber, Surface treatment and coating, Astronomy. Geodesy. Geography, Burners. Boilers, Welding, brazing and soldering, Milk and milk products, Telecontrol. Telemetering, Radiation measurements, Paint coating processes, Audio, video and audiovisual engineering, Road engineering, Non-textile floor coverings, Photography, Plastics, Products of the textile industry, On-board equipment and instruments, Piezoelectric and dielectric devices, Agricultural machines, implements and equipment, Mechanical testing, Ground service and maintenance equipment.

RU-GOST R, Specific Surface Meter Parameters

GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 8.661-2018 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring surface flatness parameters of optical surfaces up to 200 mm
GOST 8.428-1981 State system for ensuring the uniformity of measurements. Areometers. The values of coefficients of surface tension of liquids
GOST 21293-1975 Surface finish heated core boxes. Parameters
GOST R ISO 4287-2014 Geometrical product specifications (GPS). Surface texture. Profile method. Terms, definitions and surface texture parameters
GOST 7016-1982 Products of wood and wooden materials. Parameters of surface roughness
GOST 24773-1981 Surfaces with regular microshape. Classification, parameters and characteristics
GOST R 25645.161-1994 The surfaces of Moon, Mars and Venus. The radiophysical parameters
GOST 25450-1982 Surface regenerative heaters. Types, basic parameters and dimensions
GOST 30260-1996 Equipment for arc deposition surfaces of rotative bodies. Types, basic parameters and dimensions
GOST R ISO 25178-2-2014 Geometrical product specifications (GPS). Surface texture. Profile method. Part 2. Terms, definitions and surface texture parameter
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 28276-1989 Surface acoustic wave devices. Types, main parameters and methods of measurements
GOST 18627-1973 Startstop and synchronous telegraph distortion meters. Types and main characteristics
GOST R 51747-2001 Microwave radio beacon instrument approach landing system for air vehicles. Main parameters and methods of measuring
GOST 27994-1988 Machinery for agriculture. Trailer units of shallow tillage equipment. Main dimensions and attachment point
GOST 28387-1989 Microwave radio beacon instrument approach landing system for air vehicls. Main parameters and measurement techniques
GOST 8.256-1977 State system for ensuring the uniformity of measurements. Standardization and determination of dynamic characteristics of analogue measuring instruments. Basic principles

Professional Standard - Machinery, Specific Surface Meter Parameters

JB/T 4136.1-1999 Meter lathe parameters
JB/T 6266-1992 Optical comparator for angle measurement - Basic parameter
JB/T 10564-2006 Basic parameters for flow measuring instruments
JB/T 8231-1999 The basic parameters of the plane-gratings spectrographs
JB/T 8078-1999 Grinders for internal surface of outer ring of bearings parameters
JB/T 8079-1999 Grinder for outer surface of inner rings of bearings parameters
JB/T 8080-1999 Grinders for internal surface of inner ring of bearings parameters
JB/T 8079.1-1999 Bearing inner ring outer surface grinding machine parameters
JB/T 11575.1-2013 Handarbour instrumental lathe.Part 1: Styles and parameters
JB/T 8386.2-2014 Digital indicating and control instruments with analogue inputs for use in industrial-process measurement and control systems.Part 2: Instruments with time proportional outputs
JB/T 8386.2-1996 Digital indication controllers of analog input intended to be used in measurement and control system of industrial process Part 2: Time scale output instruments

Group Standards of the People's Republic of China, Specific Surface Meter Parameters

T/ZSA 110-2022 Specific surface area and pore size analyzer

Professional Standard - Chemical Industry, Specific Surface Meter Parameters

HG/T 6138-2023 Specific surface area and pore size analyzer

AT-ON, Specific Surface Meter Parameters

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 1119-1993 Technical surfaces — Terms, definitions, Parameters for the description of the profile bearing length ratio

YU-JUS, Specific Surface Meter Parameters

JUS M.A1.032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish
JUS M.A1.010-1983 Surface roughness. Terminology. Surface and its parameters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Specific Surface Meter Parameters

GB/T 13970-1992 Basic parameter series of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 1314-1991 Basic parameters for flow measuring instruments
GB/T 25187-2010 Surface chemical analysis.Auger electron spectroscopy.Description of selected instrumental performance parameters
GB/T 1031-1995 Surface ronghness parameters and their values
GB/T 28892-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Description of seleted instrumental performance parameters
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 12472-1990 Surface roughness--Parameters and their values for wooden pieces
GB/T 12767-1991 Powder metallurgy products--Surface roughness--Parameters and their values
GB/T 1031-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Surface roughness parameters and their values
GB/T 12472-2003 Geometrical product specifications(GPS)--Surface texture:Profile method Surface roughness Parameters and their values for wooden pieces
GB/T 3505-2000 Geometrical Product Specifications (GPS)-Surface texture:Profile method-Terms,definitions and surface texture parameters
GB/T 3505-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Terms,definitions and surface texture parameters
GB/T 7220-2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method Surface roughness-Terminology-Measurement of surface roughness Parameters
GB/T 12128-1989 Reference sources for the calibration of surface contamination monitors--Beta-emitters and alpha-emitters
GB/T 18618-2009 Geometrical Product Specification(GPS)-Surface texture:Profile method-Motif parameters
GB/T 18618-2002 Geometrical product specification (GPS)--Surface texture:Profile method--Motif parameters
GB/T 15757-2002 Geometrical product specifications(GPS) Surface imperfections--Terms.definitions and parameters
GB/T 31199-2014 Surface roughness parameters measurement for CTP plate substrate
GB/T 22572-2008 A Method for Estimating Depth-Resolved Parameters Using Multi-delta Layered Reference Materials for Secondary Ion Mass Spectrometry in Surface Chemistry

National Metrological Verification Regulations of the People's Republic of China, Specific Surface Meter Parameters

JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus

PL-PKN, Specific Surface Meter Parameters

PN M04251-1987 Geometrie surface structure Surface roughness Numerical values of parameters
PN M04255-1974 Geometrical structure o? surface Surface waviness Basic definilions and parameters
PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements

HU-MSZT, Specific Surface Meter Parameters

British Standards Institution (BSI), Specific Surface Meter Parameters

BS EN 1370:1997 Founding - Surface roughness inspection by visual tactile comparators
BS ISO 3567:2011 Vacuum gauges. Calibration by direct comparison with a reference gauge
BS ISO 15471:2005 Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
BS EN ISO 25178-2:2012 Geometrical product specifications (GPS). Surface texture. Areal. Terms, definitions and surface texture parameters
BS ISO 15470:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
BS ISO 15470:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS ISO 15471:2016 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS EN ISO 21920-2:2022 Geometrical product specifications (GPS). Surface texture: Profile - Terms, definitions and surface texture parameters
DD ENV 13093-1998 Public transport. Road vehicles. Driver's console mechanical interface requirements. Minimum display and keypad parameters
BS EN ISO 25178-2:2022 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Terms, definitions and surface texture parameters
BS EN ISO 4287:1998 Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
BS EN ISO 4287+A1:2000 Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
BS EN ISO 4287:1998+A1:2009 Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS EN ISO 8785:1999 Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
19/30397789 DC BS EN ISO 25178-2. Geometrical product specifications (GPS). Surface texture: Areal. Part 2. Terms, definitions and surface texture parameters
BS EN ISO 12085:1997 Geometrical product specification (GPS) - Surface texture - Profile method - Motif parameters
DD CEN/TS 635-4:2007 Plywood. Classification by surface appearance - Parameters of ability for finishing, guideline
13/30272930 DC BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
BS EN 16836-3:2016 Communication systems for meters. Wireless mesh networking for meter data exchange. Energy profile specification dedicated application layer
18/30378790 DC BS ISO 8769. Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters
20/30398212 DC BS EN ISO 21920-2. Geometrical product specifications (GPS). Surface texture: Profile. Part 2. Terms, definitions and surface texture parameters
BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN 61968-9:2009 Application integration at electric utilities - System interfaces for distribution management - Interface for meter reading and control
BS EN 61968-9:2010 Application integration at electric utilities. System interfaces for distribution management. Interface for meter reading and control
BS EN 61968-9:2014 Application integration at electric utilities. System interfaces for distribution management. Interfaces for meter reading and control
BS EN 60444-8:2003 Measurement of quartz crystal unit parameters - Test fixture for surface mounted quartz crystal units
BS EN 60444-8:2017 Measurement of quartz crystal unit parameters. Test fixture for surface mounted quartz crystal units
BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast

Professional Standard - Military and Civilian Products, Specific Surface Meter Parameters

WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter

RO-ASRO, Specific Surface Meter Parameters

STAS 5730/2-1985 Surface conditions SURFACE ROUGHNESS PARA- METERS AND SPECIFICATIONS
STAS 9244-1990 Surface grinding machines. Main parameters
STAS 9244-1980 SURFACE GRINDING WITH HORIZONTAL OR VERTICAL SPINDLE Basic parameters

German Institute for Standardization, Specific Surface Meter Parameters

DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN EN ISO 25178-2:2012-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012 / Note: To be replaced by DIN EN ISO 25178-2 (2020-02).
DIN EN ISO 21920-2:2022-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06); German version EN ISO 21920-2:2022
DIN EN ISO 8785:1999 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999
DIN EN ISO 12085 Berichtigung 1:2009-09 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997, Corrigendum to DIN EN ISO 12085:1998-05; German version EN ISO 12085:1997/AC:2008
DIN EN ISO 8785:1999-10 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999
DIN EN ISO 12085:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN EN ISO 12085:1998-05 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997
DIN EN ISO 21920-2:2020 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO/DIS 21920-2:2020); German and English version prEN ISO 21920-2:2020
DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
DIN EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012
DIN EN ISO 25178-2:2023-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021); German version EN ISO 25178-2:2022
DIN CEN/TS 635-4:2007 Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline; German version CEN/TS 635-4:2007
DIN EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DIN EN ISO 21920-2:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
DIN EN ISO 4287:2010 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009); German version EN ISO 4287:1998 + AC:2008 + A1:2009
DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

CZ-CSN, Specific Surface Meter Parameters

CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 08 1161-1990 Heaters, surface, regenerative. Types. Fundamental parameters
CSN 47 8611-1987 Milking machine installations. Milk meters. Types, parameters and technical requirements

SE-SIS, Specific Surface Meter Parameters

SIS SS-ISO 4287/1:1988 Surface roughness - Terminology - Part 1: Surface and its parameters
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS-ISO 468:1988 Surface roughness - Parameters, their values and general rules for specifying requirements
SIS SS-ISO 8503-4:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for
SIS SS-ISO 8503-3:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators
SIS SS-ISO 8503-2:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 1: Specifications and definitions for ISO sur- face profile comparators for
SIS SS-IEC 912:1990 Nuclear instrumentation - ECL (emitter coupled logic) frontpanel interconnections in counter logic

Professional Standard - Petroleum, Specific Surface Meter Parameters

SY 6146-1995 Drilling parameter instrumentation driller operation combination
SY/T 6146-1995 Drilling parameter instrument driller operation combination platform

European Committee for Standardization (CEN), Specific Surface Meter Parameters

EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators
EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
PD CEN/TS 635-4:2007 Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
FprEN ISO 25178-2:2021 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO/FDIS 25178-2:2021)
EN ISO 21920-2:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 12085:1997 Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters ISO 12085: 1996
EN ISO 8785:1999 Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and Parameters ISO 8785:1998
FprEN ISO 21920-2:2021 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO/FDIS 21920-2:2021)
EN ISO 4287:1998/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
DD ENV 635-4-1996 Plywood - Classification by Surface Appearance - Part 4: Parameters of ability for Finishing, Guideline
EN ISO 4287:1998/AC:2008 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997/Cor 1:1998/Cor 2:2005)
EN ISO 4287:1998 Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters Incorporates Amendment A1: 2009
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
EN ISO 12085:1997/AC:2008 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce
EN ISO 8503-1:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

Association Francaise de Normalisation, Specific Surface Meter Parameters

NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
NF E11-066:1990 Electronic comparators. Angular dimensional sensors. Technical data sheet.
NF E11-061:1992 Electronic comparators. Linear dimensionalsensors. Technical data sheet.
NF EN ISO 25178-2:2022 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 2 : termes, définitions et paramètres d'états de surface
NF E05-031-2*NF EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2 : terms, definitions and surface texture parameters
NF EN 12896-8:2019 Transports publics - Modèle de données de référence - Partie 8 : tableaux de bord et statistiques
NF E05-031-2:2012 Geometrical product specifications (GPS) - Surface texture : Areal - Part 2 : terms, definitions and surface texture parameters.
NF E05-015/A1:2009 Geometrical Product Specifications (GPS) - Surface texture : profile method - Terms, definitions and surface texture parameters - Amendment 1 : peak count number.
NF E05-016-2*NF EN ISO 21920-2:2022 Geometrical product specifications (GPS) - Surface texture : profile - Part 2 : terms, definitions and surface texture parameters
NF EN ISO 8785:1999 Spécification géométrique des produits (GPS) - Imperfections de surface - Termes, définitions et paramètres
NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF EN ISO 21920-2:2022 Spécification géométrique des produits (GPS) - Etat de surface : méthode du profil - Partie 2 : termes, définitions et paramètres d'état de surface
NF E05-020:1998 Geometrical Product Specifications (GPS) - Surface texture : profile method - Motif parameters.
NF P98-218-3:1995 Tests relating to pavements. Evenness tests. Part 3 : determination of longitudinal evennes indexes calculated from profilometer data.
NF E05-019*NF EN ISO 8785:1999 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
NF EN ISO 12085:1998 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Paramètres liés aux motifs
NF M60-517:2010 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters.
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
XP CEN/TS 15901-13:2011 Caractéristiques de surface des routes et aéroports - Partie 13 : mode opératoire de détermination de l'adhérence de la surface d'un revêtement de chaussée par mesurage d'un coefficient de frottement transversal (CFTO) : l'odoliographe
XP B54-170-4*XP CEN/TS 635-4:2008 Plywood - Classification by surface appearance - Part 4 : parameters of ability for finishing, guideline
XP CEN/TS 635-4:2008 Contreplaqué - Classification selon l'aspect des faces - Partie 4 : paramètres d'aptitude à la finition, guide
NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
NF EN ISO 8769:2022 Mesurage de la radioactivité - Radionucléides émetteurs alpha, bêta et photoniques - Spécifications des étalons de référence pour l'étalonnage des contrôleurs de contamination de surface
NF T35-503-3*NF EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-3:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 3 : method for the calibration of ISO surface profile comparators and for the determination of sur

TR-TSE, Specific Surface Meter Parameters

TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH

International Organization for Standardization (ISO), Specific Surface Meter Parameters

ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
ISO 15470:2017 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO 15471:2004 Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
ISO 15471:2016 Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
ISO 15470:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO 4287-1:1984 Surface roughness; Terminology; Part 1 : Surface and its parameters Trilingual edition
ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 21920-2:2021 Geometrical product specifications (GPS) — Surface texture: Profile — Part 2: Terms, definitions and surface texture parameters
ISO 25178-2:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 468:1982 Surface roughness; Parameters, their values and general rules for specifying requirements
ISO 12085:1996 Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters
ISO 4287:1997/cor 2:2005 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Technical Corrigendum 2
ISO 8769:1988 Reference sources for the calibration of surface contamination monitors; beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters
ISO 4287:1997/Cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Technical Corrigendum 1
ISO 12085:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters; Technical Corrigendum 1
ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su

Danish Standards Foundation, Specific Surface Meter Parameters

DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
DS/ISO 4287/1:1986 Surface roughness Terminology Part 1: Surface and its parametres
DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness
DS/EN ISO 4287/Corr. 2:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DS/EN ISO 4287/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DS/EN ISO 4287:1999 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DS/EN ISO 12085/Corr. 1:2007 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters
DS/EN ISO 12085:1998 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters
DS/ISO 12085:1997 Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters
DS/EN ISO 4287/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number
DS/EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
DS/EN ISO 8785:2000 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
DS/ISO 4288:1986 Rules and procedures for the measurement of surface roughness parametres using stylus instruments
DS/ISO 468:1986 Surface roughness. Parameters, their values and general rules for specifying requirements
DS/EN ISO 179-2/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data
DS/CEN/TS 635-4:2007 Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
DS/EN 13893:2003 Resilient, laminate and textile floor coverings - Parameters for the measurement of dynamic coefficient of friction on dry floor surfaces

Japanese Industrial Standards Committee (JISC), Specific Surface Meter Parameters

JIS B 0660:1998 Surface roughness -- Terminology -- Part 1: Surface and its parameters
JIS K 0161:2010 Surface chemical analysis -- Auger electron spectroscopy -- Description of selected instrumental performance parameters
JIS K 0162:2010 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters
JIS B 0631:2000 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Motif parameters
JIS B 0601:2013 Geometrical Product Specifications (GPS).Surface texture: Profile method.Terms, definitions and surface texture parameters
JIS B 0601:2001 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Specific Surface Meter Parameters

SP 112 COMPARATOR-2016 Quality Standard For Evaluation Of Cast Surface Finishes – Visual and Tactile Method – Three Dimensional Cast Surface Comparator

工业和信息化部/国家能源局, Specific Surface Meter Parameters

JB/T 4136.1-2017 Instrument Lathes Part 1: Types and Parameters

AGMA - American Gear Manufacturers Association, Specific Surface Meter Parameters

08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear

Korean Agency for Technology and Standards (KATS), Specific Surface Meter Parameters

KS D ISO 15470-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS D ISO 15471-2005(2020) Surface chemical analysis－Auger electron spectroscopy－Description of selected instrumental performance parameters
KS D ISO 15471:2005 Surface chemical analysis－Auger electron spectroscopy－Description of selected instrumental performance parameters
KS M ISO 91-2:2008 Petroleum meaurement tables-Part 2: Tables based on a reference temperature of 20℃
KS D ISO 15470:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS B ISO 12085:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Motif parameters
KS B ISO 12085:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters
KS M ISO 91-1:2008 Petroleum measurement tables-Part 1: Tables based on a reference temperature of 15℃ and 60℉
KS B ISO 4287-2014(2019) Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
KS B ISO 4287:2008 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Terms, definitions and surface texture parameters
KS B ISO 4287:2014 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
KS B ISO 25178-2:2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
KS B ISO 8785-2014(2019) Geometrical Product Specification(GPS) — Surface imperfections — Terms, definitions and parameters
KS B ISO 12085-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS B ISO 8785:2004 Geometrical Product Specifications(GPS)-Surface imperfections-Terms, definitions and parameters
KS B ISO 8785:2014 Geometrical Product Specification(GPS) — Surface imperfections — Terms, definitions and parameters
KS M ISO 8503-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surf
KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p
KS M ISO 8503-4:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS M ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface profile comparators and for the determination of surface

American Gear Manufacturers Association, Specific Surface Meter Parameters

AGMA 08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear

AENOR, Specific Surface Meter Parameters

UNE 82302:1992 CLASSIFICATION OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH.
UNE-EN ISO 12085:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
UNE-EN ISO 25178-2:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
UNE-EN ISO 4287:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). SURFACE TEXTURE: PROFILE METHOD. TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS. (ISO 4287:1997+TECHNICAL CORRIGENDUM 1).
UNE-EN ISO 4287:1999/A1:2010 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
UNE-EN ISO 8785:2000 GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
UNE 82301:1986 SURFACE ROUGHNESS. PARAMETERS, THEIR VALUES AND GENERAL RULES FOR SPECIFYING REQUIREMENTS
UNE-CEN/TS 635-4:2008 EX Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline

Association of German Mechanical Engineers, Specific Surface Meter Parameters

VDI/VDE 2187-2002 Uniform user interface for digital field instruments
VDI/VDE 2601-1991 Requirements on the surface structure to cover function capability of surfaces manufactured by cutting; list of parameters

Standard Association of Australia （SAA）, Specific Surface Meter Parameters

AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO 12085:1996/Cor.1:1998 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters TECHNICAL CORRIGENDUM 1

Indonesia Standards, Specific Surface Meter Parameters

SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities

ES-AENOR, Specific Surface Meter Parameters

UNE 82-315 Pt.1-1986
UNE 82-301-1986
UNE 82-302-1992 Classification of insutruments and devices for measurement and evaluation of the geometrical parameters of surface finish

International Electrotechnical Commission (IEC), Specific Surface Meter Parameters

IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
IEC 61968-9:2013 Application integration at electric utilities - System interfaces for distribution management - Part 9: Interface for meter reading and control
IEC 61968-9:2009 Application integration at electric utilities - System interfaces for distribution management - Part 9: Interface for meter reading and control

Lithuanian Standards Office , Specific Surface Meter Parameters

LST EN ISO 4287:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997)
LST EN ISO 12085:2001 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996)
LST EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
LST EN ISO 4287:2007/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
LST EN ISO 12085:2001/AC:2008 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
LST EN ISO 8785:2006 Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998)

KR-KS, Specific Surface Meter Parameters

KS B ISO 25178-2-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
KS B ISO 25178-2-2022 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture paramet
KS M ISO 8503-4-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf

ES-UNE, Specific Surface Meter Parameters

UNE-EN ISO 25178-2:2023 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
UNE-EN ISO 21920-2:2023 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
UNE-EN ISO 12085:1998/AC:2009 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)

未注明发布机构, Specific Surface Meter Parameters

DIN EN ISO 4287:1998 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters
BS EN ISO 21920-2:2022(2023) Geometrical product specifications (GPS) — Surface texture : Profile Part 2 : Terms, definitions and surface texture parameters
BS EN ISO 8785:1999(2002) Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
BS EN ISO 12085:1997(2009) Geometric Product Specification (GPS) — Surface texture : Profile method — Motif parameters
DIN EN ISO 8503-4:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a stylus instrument
BS ISO 20341:2003(2010) Surface chemical analysis — Secondary - ion mass spectrometry — Method for estimating depth resolution parameters with multiple delta - layer reference materials

GOSTR, Specific Surface Meter Parameters

GOST R 58866-2020 Instrument rolling bearings. Methods for controlling geometrical parameters of bearing parts
GOST 34348-2017 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

Aerospace Industries Association/ANSI Aerospace Standards, Specific Surface Meter Parameters

AIA/NAS NAS823-2011 CAST SURFACE COMPARISON STANDARD Rev 3 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]

VN-TCVN, Specific Surface Meter Parameters

TCVN 5120-2007 Geometrical Product Specifications (GPS).Surface texture: Prof in method.Terms, definitions and surface texture parameters
TCVN 2511-2007 Geometrical Product Specifications (GPS).Surface texture: Profile method.Motif parameters

CEN - European Committee for Standardization, Specific Surface Meter Parameters

EN ISO 4287:1998/PRA2:2013 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms@ definitions and surface texture parameters - Amendment 2

Institute of Electrical and Electronics Engineers (IEEE), Specific Surface Meter Parameters

IEEE 1390.2-1999 Automatic meter reading via telephone - Network to telemetry interface unit

American Society for Testing and Materials (ASTM), Specific Surface Meter Parameters

ASTM E1577-95(2000) Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM E1577-11 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM E1577-04 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM D7330-22 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM F1811-97 Standard Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data

Taiwan Provincial Standard of the People's Republic of China, Specific Surface Meter Parameters

CNS 14306-1-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
CNS 14306.1-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.2-1999 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates (Method for the grading of surface profile of abrasive blast-cleaned steel-Comparator procedure
CNS 14306-2-1999 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates (Method for the grading of surface profile of abrasive blast-cleaned steel-Comparator procedure

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Specific Surface Meter Parameters

GB/T 33523.2-2017 Geometrical product specifications (GPS)—Surface texture:Areal—Part 2: Terms, definitions and surface texture parameters

AREMA - American Railway Engineering and Maintenance-of-Way Association, Specific Surface Meter Parameters

790-1994 Data for Gages and Flangeways at Frogs and Crossings Showing Limits Where Gage Is Not Widened for Curvature ((See AREMA PORTFOLIO OF TRACKWORK PLANS))
793-1952 Data Sheet for A.A.R. Standard Wheel Flanges@ Treads and Gages ((See AREMA PORTFOLIO OF TRACKWORK PLANS))

Professional Standard - Earthquake, Specific Surface Meter Parameters

DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method

GB-REG, Specific Surface Meter Parameters

REG NACA-ARR-L5F23-1945 Lifting-surface-theory values of the damping in roll and of the parameter used in estimating aileron stick forces

PT-IPQ, Specific Surface Meter Parameters

NP EN 635-4-2002 Plywood Classification by surface appearance Part 4:Parameters of ability for finishing.Guideline