ZH
RU
ES

isothermal crystallization temperature

isothermal crystallization temperature, Total:397 items.

In the international standard classification, isothermal crystallization temperature involves: Iron and steel products, Non-ferrous metals, Organic chemicals, Testing of metals, Products of the chemical industry, Fertilizers, Plastics, Materials for aerospace construction, Electronic display devices, Metrology and measurement in general, Thermodynamics and temperature measurements, Road vehicle systems, Measurement of volume, mass, density, viscosity, Fuels, Electronic components in general, Geology. Meteorology. Hydrology, Fasteners for aerospace construction, Solar energy engineering, Piezoelectric and dielectric devices, Semiconductor devices, Insulating materials, Petroleum products in general, Protection against dangerous goods, Leisure. Tourism, Graphic technology, Chipless working equipment, Earthworks. Excavations. Foundation construction. Underground works, Construction industry, Electricity. Magnetism. Electrical and magnetic measurements, Metalliferous minerals, Structures of buildings, Ceramics, Ferrous metals, Pipeline components and pipelines, Environmental testing, Installations in buildings, Coals, Construction materials, Galvanic cells and batteries, Adhesives, Coatings and related processes used in aerospace industry, Welding, brazing and soldering, Aerospace fluid systems and components, Road vehicles in general, Protection against fire, Protection of and in buildings, Products of the textile industry, Road engineering, Printed circuits and boards, Clothes, Paint ingredients, Textile fibres, Glass, Optoelectronics. Laser equipment, Ergonomics, Test conditions and procedures in general.

CZ-CSN, isothermal crystallization temperature

CSN 65 0311-1981 Method for determination of rystallization temperature
CSN 25 8158-1973 Thermometers for determination of congealing point on bulb
CSN 73 2581-1983 Test for resistance or surface finish of building structures to acute temperature variations
CSN 44 1789-1985 Iron ores, aglomerates and pellets. Method for determination of start temperature and temperature interval of softening.
CSN 42 0349-1988 Metal testing. Determination of the nil-ductility transition temperature of structural steels
CSN ISO 3146:1992 Plastics. Detennination of melting bahaviour (melting temperatuie o? melting range) of semi-crystalline polymers.
CSN 42 0350-1987 Metal testing. Determination of brittleness temperature of structural steels by impact bending test

Korean Agency for Technology and Standards (KATS), isothermal crystallization temperature

KS D 0069-2002 Method of determining the crystallization temperatures of amorphous metals
KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
KS D 0069-2002(2017) Method of determining the crystallization temperatures of amorphous metals
KS M 1801-1982 Measuring methods of crystalizing temperature and water absorption in 290nm for industrial caprolactam
KS M 1801-2017(2022) Measuring methods of crystalizing temperature and water absorption in 290 nm for industrial caprolactam
KS M 1801-2017 Measuring methods of crystalizing temperature and water absorption in 290 nm for industrial caprolactam
KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS M ISO 11357-3:2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-3:2013 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-3:2003 Plastics -Differential scanning calorimetry (DSC) -Part 3:Determination of temperature and enthalpy of melting and crystallization
KS C IEC 61074-2002(2012) Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS C 8529-1995(2020) Temperature coefficient measuring methods for crystalline solar cells and modules
KS W ISO 8279-2007(2018) Aerospace－Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications：600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient t
KS W ISO 8940:2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS B ISO 386:2007 Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS W ISO 12272:2005 Aerospace-Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications:900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12273:2005 Aerospace-Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12272:2016 Aerospace－Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications：900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12273:2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS M ISO 14615:2007 Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
KS M ISO 17499:2011 Carbonaceous materials used in the production of aluminium-Determination of baking level expressed by equivalent temperature
KS M ISO 17499:2016 Carbonaceous materials used in the production of aluminium－Determination of baking level expressed by equivalent temperature
KS W ISO 7332:2009 Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃, 1 100 MPa (at ambient temperature)/315 ℃ and 1 100 MPa (at ambient temperature)/425 ℃－Di
KS W ISO 9156:2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur
KS M ISO 3146-2012(2017) Plastics－Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS M ISO 3146-2012(2022) Plastics－Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS C 7105-2007(2017) Plasma display panels - Measuring method of glass surface temperature on PDP module
KS B ISO 386-2007(2022) Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS B ISO 386-2007(2017) Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS C 8529-1995 Temperature coefficient measuring methods for crystalline solar cells and modules

Japanese Industrial Standards Committee (JISC), isothermal crystallization temperature

JIS H 7151:1991 Method of determining the crystallization temperatures of amorphous metals
JIS C 8920:2005 Measuring method of equivalent cell temperature for crystalline solar cells by the open-circuit voltage
JIS C 8916:1989 Temperature coefficient measuring methods for crystalline solar cells and modules
JIS G 3115:2000 Steel plates for pressure vessels for intermediate temperature service

Danish Standards Foundation, isothermal crystallization temperature

DS/ISO 1392:1986 Determination of crystallizing point — General method
DS/EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
DS/EN 61074:1994 Determination of heats and temperatures of melting and crystallixation of electrical insulating materials by differemtial scamming calorimetry
DS/EN ISO 3146/AC:2003 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
DS/EN ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
DS/EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
DS/EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
DS/EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

RU-GOST R, isothermal crystallization temperature

GOST 26743.2-1991 Caprolactam for industrial use. Determination of crystallizing point
GOST 18995.5-1973 Organic chemical products. Methods for determination of freezing point
GOST 14894-1969 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification
GOST 5066-1991 Motor fuels. Methods for determination of cloud, chilling and freezing points
GOST 28976-1991 Photovoltaic devices of crystalline silicon. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST 20287-1991 Petroleum products. Methods of test for flow point and pour point
GOST R 56724-2015 Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
GOST 20841.3-1975 Silicium organic products. Method for determination of congelation temperature
GOST 30679-1999 Standard platinum resistance thermometers of the first and second grades. General technical requirements
GOST 26517-1985 Irom ores, agglomerates and pellets. Method for determination of initial softening point and temperature range of softening
GOST R ISO 17499-2016 Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
GOST 8.568-1999 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration
GOST 33121-2014 Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects
GOST R 56756-2015 Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

CU-NC, isothermal crystallization temperature

NC 33-67-1987 Oil Industry. Fuels for Engines Determination of Roilling Temperatures, Crystallization Start and Crystallization

Association Francaise de Normalisation, isothermal crystallization temperature

NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
NF ISO 23381:2020 Détermination de la température de désolubilisation (cristallisation) des engrais liquides
NF EN ISO 3146:2022 Plastiques - Détermination du comportement à la fusion (température de fusion ou plage de températures de fusion) des polymères semi-cristallins par méthodes du tube capillaire et du microscope polarisant
NF T51-507-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization
NF C26-214:1993 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry.
NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)
NF T51-507-3*NF EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization
NF EN 50446:2006 Thermomètres à thermocouples droits avec tube de protection métallique ou en céramique, et accessoires
XP T66-067:2022 Bituminous binders - Determination of the glass transition temperature and of the cristallizable compounds in bitumens by Differential Scanning Calorimetry
NF C57-104:1995 Procedures for temperature and irradiance corrections to measured i-V characteristics of crystalline silicon photovoltaic devices.
NF L24-508*NF EN 4069:1996 Aerospace series. Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 650 degrees celsius.
NF P50-732:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations.
NF T76-052:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91).
NF T51-621*NF EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
NF C96-051*NF EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
NF A32-055-2:1996 Technical delivery conditions for steel castings for pressure purposes. Part 2 : steel grades for use at room temperature and elevated temperatures.
NF T51-621:1997 PLASTICS. DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS. (EUROPEAN STANDARD EN ISO 3146).
NF EN 62373:2006 Essai de stabilité de température en polarisation pour transistors à effet de champ métal-oxyde-semiconducteur (MOSFET)
NF P50-732*NF EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
NF T51-507-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T51-507-6*NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, isothermal crystallization temperature

GB/T 4106-1983 Determination method for secondary recrystallization temperature of tungsten wire
GB/T 19466.3-2004 Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization
GB/T 14999.7-2010 Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
GB/T 6525-1986 Sintered metal materials--Determination of compression strength at room temperature
GB/T 6495.4-1996 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
GB/T 16582-2008 Plastics.Determination of melting behaviour (melting temperature of melting range)of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 21783-2008 Plasties.Determination of melting behaviour (melting temperature or melting range)of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 19466.6-2009 Plastics.Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT)

Professional Standard - Non-ferrous Metal, isothermal crystallization temperature

YS/T 516-2012 Determination method for secondary recrystallization temperature of tungsten wire
YS/T 516-2006 Measuring method of secondary recrystallization temperature of tungsten wire
YS/T 63.22-2009 Carbonaceous materials used in the production of aluminium.Part 22:Determination of baking level expressed by equivalent temperature

International Organization for Standardization (ISO), isothermal crystallization temperature

ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
ISO 7060:1982 Caprolactam for industrial use; Determination of crystallizing point
ISO 3146:1974 Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 13589:1998 Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/
ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:1999 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
ISO 9609:1996 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
ISO 9618:1996 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 9492:1987 Bases for design of structures; Temperature climatic actions
ISO/TR 9492:1987 Bases for design of structures; Temperature climatic actions
ISO 12278:1999 Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient tempera
ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 11357-3:1999/Amd 1:2005 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization; Amendment 1
ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
ISO 3168:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12274:1997 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
ISO 17499:2023 Carbonaceous materials used in the production of aluminium — Determination of baking level expressed by equivalent temperature
ISO 3209:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3223:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3224:1998 Aerospace - Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:2016 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425
ISO 6771:1987 Aerospace; Fluid systems and components; Pressure and temperature classifications
ISO 8538:1999 Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3221:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12273:2010 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12272:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimen
ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
ISO 3146:2022 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
ISO 3225:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - D
ISO 3191:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 7332:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 9156:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 3146:1985 Plastics; Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
ISO 3222:1998 Aerospace - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425
ISO 7995:1985 Aerospace — Fasteners — Nuts, hexagon, self-locking — Strength classification 1 100 MPa — Maximum operating temperature 235 degrees C
ISO 6771:1981 Aerospace construction — Fluid systems and components — Pressure and temperature classifications
ISO 386:1977 Liquid-in-glass laboratory thermometers; Principles of design, construction and use
ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

British Standards Institution (BSI), isothermal crystallization temperature

BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
20/30379723 DC BS ISO 23381. Determination of Salt Out (Crystallization) Temperature of Liquid Fertilizers
BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS EN ISO 11357-3:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS 5756:2007+A2:2017 Visual strength grading of temperate hardwood-Specification
BS ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
BS ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
BS EN 60068-2-39:2016 Tracked Changes. Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
BS A 345:1999 Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 12273:2010 Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/ 315 °C and 900 MPa (at ambient temperature)/425 °C. Dimensions
BS EN 4130:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN ISO 10211:2009 Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
BS EN ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
BS EN 61189-11:2013 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Measurement of melting temperature or melting temperature ranges of solder alloys
BS EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at room temperature and at elevated temperature
BS EN 4131:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature) / 425 °C
BS 2A 302:2000 Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification
BS 2A 295:2000 Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods
BS 9612 N016:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperat
BS 9612 N017:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temper
BS EN ISO 14505-2:2007 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Determination of equivalent temperature
BS EN ISO 11357-6:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

PL-PKN, isothermal crystallization temperature

PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers
PN C45301-08-1993 Caprolactam. Method of test. Determination of crystalizing point
PN B02015-1986 Actions on building structures Variable environmental actions Temperature action

GOSTR, isothermal crystallization temperature

GOST R 57931-2017 Composites. Determination of melting and crystallization temperatures by thermal analysis
GOST 5066-2018 Motor fuels. Methods for determination of cloud, chilling and freezing points
GOST R 8.935-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Titanium. Lattice constants for the temperature range from 5 K to 300 К. Linear temperature expansion coefficient for the temperature range from 5 К to 1
GOST R 59242-2020 Buildings and constructions. Calculation of temperature field nodes of enclosing structures

TR-TSE, isothermal crystallization temperature

TS 2249-1976 PLASTICS r DETERMINATION OF MELTING TEMPERATURE OF SEMI - CRYSTALLINE POLYMERS , OPTICAL METHOD

Society of Automotive Engineers (SAE), isothermal crystallization temperature

SAE AMS3193D-2011 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193E-2014 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE J2234-2001 Equivalent Temperature桾ruck and Bus
SAE J2234-2007 Equivalent Temperature Truck and Bus
SAE J2234-2012 Equivalent Temperature Truck and Bus
SAE J2477-2004 Automotive Austempered Ductile (Nodular) Iron Castings (ADI)
SAE AMS3729-2011 EPOXY RESIN MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled

Professional Standard - Electron, isothermal crystallization temperature

SJ 20847-2002 Specification for broad temperature range liquid crystal mixtures
SJ/Z 9158-1987 Temperature control unit for quartz crystal elements

HU-MSZT, isothermal crystallization temperature

MSZ 11707-1969

工业和信息化部, isothermal crystallization temperature

YS/T 1258-2018 Thermal Analysis Methods for Testing Melting and Crystallization Temperatures of Nonferrous Metal Materials
SH/T 1826-2019 Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)

National Metrological Verification Regulations of the People's Republic of China, isothermal crystallization temperature

JJG 128-2003 Standard Mercury-in-Glass Thermometers (Grade Ⅱ)
JJG 161-1994 Verification Regulation of Standard Mercury-in-Glass Thermometer(Grade I)

SAE - SAE International, isothermal crystallization temperature

SAE J2234-1993 Equivalent Temperature@ Information Report (January 1993)
SAE AMS-S-29574A-2011 Sealing Compound@ Polythioether@ for Aircraft Structures@ Fuel and High Temperature Resistant@ Fast Curing At Ambient and Low Temperatures
SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED

未注明发布机构, isothermal crystallization temperature

SAE J2234-201211 Equivalent Temperature桾ruck and Bus
IPC TR-465-2 Effect of Steam Aging Time and Temperature on Solderability Test Results

American Society for Testing and Materials (ASTM), isothermal crystallization temperature

ASTM E794-06 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM E794-01 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
ASTM E794-98 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM E2509-14 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM E1061-01(2007) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1061-94(2000) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1061-01 Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM E2509-21 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM E1061-01(2022) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1061-01(2014) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM F470-89(2003) Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM A516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A516/A516M-05 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-10b Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM A662/A662M-01e1 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A774/A774M-14(2019) Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM C1499-09 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM A672/A672M-09 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM C1499-09(2013) Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM A672/A672M-09e1 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM A672/A672M-14 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM D7361-07(2018) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6816-11 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
ASTM D6816-21 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
ASTM F2732-23 Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
ASTM D7228-06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM A1077/A1077M-21 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
ASTM F470-89(1998) Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM F470-89(2009) Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM A1077/A1077M-14 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
ASTM C1499-05 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-04 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1361-01(2007) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1361-96 Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1361-01 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1361-96(2001) Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM A774/A774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-00 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-06 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-09 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-13 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM D1151-00 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D1151-00(2006) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds

Military Standards (MIL-STD), isothermal crystallization temperature

DOD A-A-54898-1993 THERMOMETER, LIQUID CRYSTAL, CLINICAL, DISPOSABLE

Professional Standard - Aviation, isothermal crystallization temperature

HB 20057-2011 Test methods for estimating grain size of superalloy investment castings
HB 7763-2005 Specification of master superalloy of polyerystalling castings for aeroengine

Heilongjiang Provincial Standard of the People's Republic of China, isothermal crystallization temperature

DB23/T 2723-2020 Maize suitable sowing temperature grade

KR-KS, isothermal crystallization temperature

KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS M ISO 11357-3-2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS W ISO 8940-2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS W ISO 9156-2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur

International Electrotechnical Commission (IEC), isothermal crystallization temperature

IEC 60314:1970 Temperature control devices for quartz crystal units
IEC TR 61074:1991 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
IEC 60314/AMD1:1979 Temperature control devices for quartz crystal units
IEC 60891:1987 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicone photovoltaic devices
IEC 60891/AMD1:1992 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices; amendment 1

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, isothermal crystallization temperature

JEDEC JEP84A-2004 Recommend Practice for Measurement of Transistor Lead Temperature
JEDEC JESD241-2015 Procedure for Wafer-Level DC Characterization of Bias Temperature Instabilities

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, isothermal crystallization temperature

GB/T 33908-2017 Technical specification for testing of liquidus temperature of the electrolyte

IN-BIS, isothermal crystallization temperature

Professional Standard - Machinery, isothermal crystallization temperature

JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
JB/T 12517.2-2015 Isothermal forging hydraulic press.Part 2: Testing of the accuracy
JB/T 51088-1999 Product quality classification of spring tube thermometers for tractors and internal combustion engines
JB/T 8262.1-2013 Electrostatic dry toner.Part 1: Test method for caking temperature

SE-SIS, isothermal crystallization temperature

SIS SS-ISO 3146:1987 Plastics - Determination of the melting behaviour (melting tern perature or melting range) of semi-crystalline polymers
SIS SMS 1235-1970 Fittings oj copper alloys for piping. Pressure and temperature ratings
SIS SMS 1233-1970 Fittings of stainless steel for piping. Pressure and temperature ratings
SIS 16 22 21-1974 Rubber. Determination of temperature of retraction after freezing

Guizhou Provincial Standard of the People's Republic of China, isothermal crystallization temperature

DB52/T 1662-2022 Classification and assessment of hot spring resorts

European Committee for Standardization (CEN), isothermal crystallization temperature

EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
prEN 61074-1992 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 1074:1991)
EN 2910:1994 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 2906:1994 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 13494:2002 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C
EN 3377:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 2907:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3723:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 2911:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3196:1994 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 3006:1994 Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C
EN 2908:1994 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3722:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
EN 2938:1995 Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
EN 3007:1996 Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
EN 4591:2005 Aerospace series - Nuts, barrel, self-locking, floating, self- aligning, in heat resisting nickel base alloy, MoS2 lubricated - Classification: 1550 MPa (at ambient temperature) / 315 °C
EN 3760:1996 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 4130:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degrees C (Incorporating corrigendum April 2010)
EN 2909:1995 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 4131:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 Degrees C (Incorporating corrigendum
EN 3543:1997 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C

German Institute for Standardization, isothermal crystallization temperature

DIN EN 61074:1994 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
DIN EN ISO 11357-3:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018); German version EN ISO 11357-3:2018
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
DIN EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
DIN EN 61074:1994-07 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
DIN EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996
DIN EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) English version of DIN EN 14257:2006-09
DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
DIN EN 62373:2007 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
DIN 53180:1996 Binders for paints and varnishes - Determination of the softening temperature of resins
DIN EN 62373:2007-01 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
DIN EN 3006:1994 Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994
DIN EN ISO 3146:2022-06 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022); German version EN ISO 3146:2022
DIN EN 17643:2022 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
DIN EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007); English version of DIN EN ISO 10211:2008-04
DIN EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013
DIN EN ISO 3146:2021 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO/DIS 3146:2021); German and English version prEN ISO 3146:2021
DIN EN ISO 11357-6:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018

GM North America, isothermal crystallization temperature

GM GM6401M-2000 "Low Permeability Fuel Filler Hoses, Moderate Temperature"
GM GM224M-1997 Moderate-Temperature, Striation-Resistant Engine Coolant Hose
GM 9982285-2009 Adhesive, One-Part, Structural, Fracture Toughened, Full Temperature Spectrum

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., isothermal crystallization temperature

ASHRAE 3867-1995 Equivalent Outdoor Temperature for District Heating Systems
ASHRAE MN-00-7-1-2000 Surface Temperature Measurements Inside an Insulated Glazing Unit Using Liquid Crystals
ASHRAE CH-93-2-1993 Heat Transfer Psychrometrics and Coil Frosting at Freezer Temperatures
ASHRAE AT-01-15-3-2001 Condensation and Icing in Gas Turbine Systems: Inlet Air Temperature and Humidity Limits

Canadian General Standards Board （CGSB), isothermal crystallization temperature

CGSB 3.23-2012-CAN/CGSB AMD 1-2013 Carbur閍cteur d抋viation (grades JET A et JET A-1)

机械工业部, isothermal crystallization temperature

JB/T 5978-1992 Malleable cast iron pipe flange pressure--temperature grade

ES-UNE, isothermal crystallization temperature

UNE-EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
UNE-EN 61074:1993 DETERMINATION OF HEATS AND TEMPERATURES OF MELTING AND CRYSTALLIZATION OF ELECTRICAL INSULATING MATERIALS BY DIFFERENTIAL SCANNING CALORIMETRY. (Endorsed by AENOR in November of 1995.)
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
UNE-EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006). (Endorsed by AENOR in November of 2006.)
UNE-EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)

BE-NBN, isothermal crystallization temperature

NBN-ISO/TR 9492:1993 Bases for design of structures. Temperature climatic actions
NBN-EN 2939-1995 Aerospace series - Screws, 100° coutersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification : 900 MPa (at ambient temperature)/650 °C

WRC - Welding Research Council, isothermal crystallization temperature

BULLETIN 147-1970 TRANSITION-TEMPERATURE DATA FOR FIVE STRUCTURAL STEELS
BULLETIN 148-1970 TRANSITION-TEMPERATURE DATA FOR FIVE STRUCTURAL STEELS

Professional Standard - Water Conservancy, isothermal crystallization temperature

SL 237-036-1999 Code for test of soil - freezing temperature test

American Welding Society (AWS), isothermal crystallization temperature

WRC 147:1970(1976) Transition-Temperature Data for Five Structural Steels
AWS PHSS WC& DC-1996 Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts

BR-ABNT, isothermal crystallization temperature

ABNT NB-335-04.3-1979

Hubei Provincial Standard of the People's Republic of China, isothermal crystallization temperature

DB42/T 2058-2023 Continuous low temperature rain and snow freezing process intensity level

中国气象局, isothermal crystallization temperature

QX/T 548-2020 Solar cell power generation efficiency temperature impact level

NL-NEN, isothermal crystallization temperature

NEN 3945-1982 Bitumen and tar products Determination of the Equi-Viscous Temperature (EVT)

Professional Standard - Chemical Industry, isothermal crystallization temperature

HG 20625-1997 Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20625-1997（编制说明） Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20604-1997 Steel pipe flange pressure temperature rating (European system)
HG 20604-1997（编制说明） Steel pipe flange pressure temperature rating (European system)

Military Standard of the People's Republic of China-General Armament Department, isothermal crystallization temperature

GJB 10308-2021 Specification for precision castings of equiaxed superalloy turbine guide blades for aeroengines
GJB 10309-2021 Specification for precision castings of aeroengine equiaxed superalloy turbine blades

European Committee for Electrotechnical Standardization（CENELEC）, isothermal crystallization temperature

EN 61074:1993 Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991)
EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)

AENOR, isothermal crystallization temperature

UNE-EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
UNE-EN ISO 3146:2001 PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS. (ISO 3146:2000)

Professional Standard - Light Industry, isothermal crystallization temperature

QB/T 1547-2016 Test method for sintering temperature range of ceramic material
QB/T 1547-1992 Method for determination of sintering temperature range of ceramic materials

RO-ASRO, isothermal crystallization temperature

STAS 5389-1987 FUEL FOR ENGINES Determination of cloud point, chilling beginning and crystals vanishing temperalure
STAS 10101/23-1975 Actions upon structures LOADS DUE TO THE EXTERNAL TEMPERATURE
STAS 10101/23A-1978 Actions upon structures LOADS DUE TO THE EXTERNAL TEMPERATURE UPON NON-INDUSTRIAL AND INDUSTRIAL STRUCTURES

AT-ON, isothermal crystallization temperature

ONORM H 5195-1-2001 Prevention of damage by corrosion and scale formation in closed warm-water-heating systems up to 100 ℃ operating tempertures

Hebei Provincial Standard of the People's Republic of China, isothermal crystallization temperature

DB13/T 2767-2018 Determination method of slagging property of raw coal for gasification - Sintering temperature method

国家市场监督管理总局、中国国家标准化管理委员会, isothermal crystallization temperature

GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature

JP-JCS, isothermal crystallization temperature

JCS 1363-2009 High strength grade thermo resistant aluminium alloy conductors ,steel reinforced

Group Standards of the People's Republic of China, isothermal crystallization temperature

T/YXNX 003-2021 Quality control method for testing results of refractoriness under load of refractories (non-differential,with rising temperature)

Association of German Mechanical Engineers, isothermal crystallization temperature

DVS 1703-1984 Recommendations for the selection of the workpiece temperature in the arc welding of steel structures of St 52

The American Road & Transportation Builders Association, isothermal crystallization temperature

AASHTO PP 42-2007 Standard Practice for Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders

Standard Association of Australia （SAA）, isothermal crystallization temperature

AS 1530.7:2007 Methods for fire tests on building materials, components and structures - Smoke control assemblies - Ambient and medium temperature leakage test procedure

American Concrete Institute, isothermal crystallization temperature

ACI 209R-1992 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures

CENELEC - European Committee for Electrotechnical Standardization, isothermal crystallization temperature

EN 60891:1994 Procedures for Temperature and Irradiance Corrections to Measured I- V Characteristics of Crystalline Silicon Photovoltaic Devices
EN 61986:2002 Rotating Electrical Machines - Equivalent Loading and Super-Position Techniques - Indirect Testing to Determine Temperature

AASHTO - American Association of State Highway and Transportation Officials, isothermal crystallization temperature

T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures

Professional Standard - Textile, isothermal crystallization temperature

FZ/T 50038-2017 Test method for bonding temperature of low melting point polyester (PET) composite fibers

Professional Standard - Aerospace, isothermal crystallization temperature

QJ 2051-1991 Specifications for transient temperature measurement of structural surfaces in thermal radiation environments

Institute of Interconnecting and Packaging Electronic Circuits (IPC), isothermal crystallization temperature

IPC TR-465-2-1993 Effect of Steam Aging Time and Temperature on Solderability Test Results

AIA/NAS - Aerospace Industries Association of America Inc., isothermal crystallization temperature

NAS560-1980 Screw-Machine@ Non Magnetic High Temperature@ Structural@ 100 Degree Flush Head (Rev 5)

Lithuanian Standards Office , isothermal crystallization temperature

LST EN ISO 3146:2002 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)

American National Standards Institute （ANSI), isothermal crystallization temperature

ASTM D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

Professional Standard - China Metal Association, isothermal crystallization temperature

CSM 01 01 02 01-2006 Uncertainty Evaluation of Measuring Results of Tensile Test of Metal Materials at Room Temperature
CSM 01010201-2006 Uncertainty Evaluation of Measuring Results of Tensile Test of Metal Materials at Room Temperature