ZH
RU
ES

Sample material sp

Sample material sp, Total:497 items.

In the international standard classification, Sample material sp involves: Plastics, Fertilizers, Test conditions and procedures in general, Mining and quarrying, Fasteners for aerospace construction, Nuclear energy engineering, Refractories, Ceramics, Inorganic chemicals, Particle size analysis. Sieving, Construction materials, Aircraft and space vehicles in general, Products of the textile industry, Photography, Waxes, bituminous materials and other petroleum products, Testing of metals, Quality, Wood, sawlogs and sawn timber, Fuels, Tobacco, tobacco products and related equipment, Road engineering, Reinforced plastics, Insulating materials, Earthworks. Excavations. Foundation construction. Underground works, Conducting materials, Road vehicles in general, Materials for aerospace construction, Mechanical testing, Products of the chemical industry, Paints and varnishes, Wastes, Biology. Botany. Zoology, Protection against fire, Powder metallurgy, Laboratory medicine, Welding, brazing and soldering, Rubber, Spices and condiments. Food additives, Non-metalliferous minerals, Analytical chemistry, Metrology and measurement in general, Animal feeding stuffs, Dentistry, Paper and board, Paint ingredients, Coals.


Japanese Industrial Standards Committee (JISC), Sample material sp

  • JIS K 6928-2:1998 Plastics -- Saturated polyesters (SP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
  • JIS K 6928-1:1998 Plastics -- Saturated polyesters (SP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
  • JIS R 2551:1985 Sampling method for castable refractories
  • JIS Z 2201:1980 Test pieces for tensile test for metallic materials
  • JIS Z 2202:1980 Test pieces for impact test for metallic materials
  • JIS Z 2201:1998 Test pieces for tensile test for metallic materials
  • JIS Z 2202:1998 Test pieces for impact test for metallic materials
  • JIS K 7152-3:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates

British Standards Institution (BSI), Sample material sp

  • BS EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Sample preparation
  • BS EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Sampling
  • BS EN 1482-3:2016 Fertilizers and liming materials. Sampling and sample preparation. Sampling of static heaps
  • BS 2SP 157-163:1973 Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials
  • 2SP 157-163-1973 Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials
  • 14/30313904 DC BS ISO 14820-2. Fertilizers and liming materials. Sampling and sample preparation. Part 2. Sample preparation
  • 14/30313901 DC BS ISO 14820-1. Fertilizers and liming materials. Sampling and sample preparation. Part 1. Sampling
  • BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
  • 18/30358423 DC BS ISO 14820-3. Fertilizers and liming materials. Sampling and sample preparation - Part 3. Sampling of static
  • BS 2SP 142 and 143:1973 Specification for solid rivets with 100 countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials
  • 2SP 142 and SP 143-1973 Specification for solid rivets with 100 countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials
  • BS ISO 14488:2008 Particulate materials - Sampling and sample splitting for the determination of particulate properties
  • BS EN ISO 1927-2:2012 Monolithic (unshaped) refractory products. Sampling for testing
  • BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
  • 22/30445078 DC BS EN ISO 9862. Geosynthetics. Sampling and preparation of test specimens
  • BS ISO 14488:2007+A1:2019 Particulate materials. Sampling and sample splitting for the determination of particulate properties
  • BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
  • BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
  • BS EN 13892-1:2002 Methods of test for screed materials - Sampling, making and curing specimens for test
  • BS EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
  • BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
  • BS SP 142-143:1973+A3:2013 Specification for solid rivets with 100° countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials
  • 22/30459579 DC BS EN 1482-4. Fertilizers. liming materials and inhibitors. Sampling and sample preparation. - Part 4. Sampling for microbial presence
  • BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
  • 22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
  • BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
  • 22/30449570 DC Plastics. Test specimens
  • BS 6245-1:2001 Sampling tobacco and tobacco products - Method of sampling batches of raw material (general principles)
  • BS 1924-1:2018 Tracked Changes. Hydraulically bound and stabilized materials for civil engineering purposes. Sampling, sample preparation and testing of materials before treatment
  • 19/30383755 DC Particulate materials — Sampling and sample splitting for the determination of particulate properties AMENDMENT 1
  • BS 5551-2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
  • BS EN 1482:1996 Sampling of solid fertilizers and liming materials
  • BS ISO 8007-3:2005 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks
  • BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
  • BS EN ISO 294-1:1997 Plastics - Injection moulding of test specimens of thermoplastic materials - General principles, and moulding of multipurpose and bar test specimens
  • BS EN ISO 10993-12:2007 Biological evaluation of medical devices - Sample preparation and reference materials
  • BS EN ISO 10993-12:2012 Biological evaluation of medical devices. Sample preparation and reference materials
  • BS 5551-2.4:1983 Fertilizers. Sampling. Practical arrangements for final samples
  • BS EN ISO 294-2:2018 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
  • BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN ISO 3785:2023 Metallic materials. Designation of test specimen axes in relation to product texture
  • BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
  • BS 6434:1984 Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
  • BS EN ISO 23153-2:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN ISO 14780:2017 Solid biofuels. Sample preparation
  • BS EN 14780:2011 Solid biofuels. Sample preparation
  • BS EN ISO 6498:2012 Animal feeding stuffs. Guidelines for sample preparation

BR-ABNT, Sample material sp

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Sample material sp

  • SP-58-2009 Pipe Hangers and Supports – Materials@ Design@ Manufacture@ Selection@ Application@ and Installation (SP-58-2009 incorporates contents of ANSI/MSS SP-69-2003@ MSS SP-77-1995 (R 2000)@ MSS SP-89-2003@ and SP-90-2000)

Danish Standards Foundation, Sample material sp

Lithuanian Standards Office , Sample material sp

AENOR, Sample material sp

  • UNE-EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
  • UNE-EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
  • UNE 61004:1975 REFRACTORY MATERIALS. SAMPLING OF MATERIALS WITHOUT FORM
  • UNE 61003:1975 REFRACTORY MATERIALS. SAMPLING OF MATERIALS WITH FORM
  • UNE 84058:2011 Cosmetic raw materials. Lead determination. Part 1-C. Sample preparation. Total lead in organic materials.
  • UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
  • UNE 64022:1970 MIXED FEEDS AND RAW MATERIALS. PREPARATION OF THE SAMPLE FOR THE ANALYSIS OF MINERALS: ZN, CO, CU, FE AND MO.
  • UNE 84057:2011 Cosmetic raw materials. Lead determination. Part 1-B. Sample preparation. Total lead in acid soluble inorganic materials.
  • UNE-EN ISO 3785:2007 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)
  • UNE-EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)

German Institute for Standardization, Sample material sp

  • DIN EN 1482-2:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation; German version EN 1482-2:2007 / Note: To be replaced by DIN EN ISO 14820-2 (2019-01).
  • DIN EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation English version of DIN EN 1482-2:2007-04
  • DIN EN 1482-1:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling; German version EN 1482-1:2007 / Note: To be replaced by DIN EN ISO 14820-1 (2019-01).
  • DIN EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling English version of DIN EN 1482-1:2007-04
  • DIN 51061:2017-04 Testing of ceramic raw and finished materials - Sampling of ceramic raw materials
  • DIN EN 1482-3:2016-10 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps; German version EN 1482-3:2016
  • DIN 51061:2017 Testing of ceramic raw and finished materials - Sampling of ceramic raw materials
  • DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
  • DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
  • DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
  • DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
  • DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
  • DIN 51061-3:1973 Testing of ceramic raw and finished materials; sampling, refractory bricks
  • DIN EN 1482-4:2022 Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 4: Sampling for microbial presence; German and English version prEN 1482-4:2022
  • DIN EN 1482-4:2022-11 Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 4: Sampling for microbial presence; German and English version prEN 1482-4:2022 / Note: Date of issue 2022-10-21
  • DIN 51061-2:2004 Testing of ceramic raw and finished materials - Part 2: Sampling of ceramic raw materials
  • DIN EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps; German version EN 1482-3:2016
  • DIN EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006); English version of DIN EN ISO 3785:2006-05
  • DIN 54389:2020-07 Solid recovered fuels - Obtaining representative laboratory samples from heterogeneous materials by bale sampling
  • DIN 13279:2022 Biotechnology - Requirements for sample containers for storing biological materials in biobanks
  • DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
  • DIN EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
  • DIN 13279:2022-05 Biotechnology - Requirements for sample containers for storing biological materials in biobanks
  • DIN EN 2375:1992 Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992
  • DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
  • DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
  • DIN 51701-3:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
  • DIN EN ISO 948:2009-10 Spices and condiments - Sampling (ISO 948:1980); German version EN ISO 948:2009
  • DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
  • DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
  • DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
  • DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
  • DIN EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993); German version EN ISO 10564:1997
  • DIN 51701-2:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
  • DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
  • DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023

TR-TSE, Sample material sp

  • TS 3083-1978 Sampling And Sample Preparation Of Bulk Materials Of Mining Products
  • TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
  • TS 707-1980 METHOD FOR SARPLING OF AGGREGATES FOR CONCRETE AND REDUCING SARPLES TO TESTING SIZE
  • TS 2109-1975 SP?CES AND CONDIMENTS SAMPLINC
  • TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS

CZ-CSN, Sample material sp

Standard Association of Australia （SAA）, Sample material sp

  • AS 4433.2:1997 Guide to the sampling of particulate materials - Preparation of samples
  • AS 4433.5:2005 Guide to the sampling of particulate materials - Sampling of slurries
  • AS 4433.1:1997 Guide to the sampling of particulate materials - Sampling procedures
  • AS 1774.4.5:2002 Refractories and refractory materials - Physical test methods - Preparation of test pieces - Gunning refractories
  • AS 1774.4.4:2001 Refractories and refractory materials - Physical test methods - Preparation of test pieces - Mouldable refractories
  • AS/NZS 1580.103.1:1995 Paints and related materials - Methods of test - Examination and preparation of samples for testing
  • AS 1580.102.1:2002 Paints and related materials - Methods of test - Sampling procedure

Association Francaise de Normalisation, Sample material sp

European Committee for Standardization (CEN), Sample material sp

  • EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
  • EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
  • EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
  • EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
  • EN ISO 3785:1995 Steel - Designation of Test Piece Axes (ISO 3785:1976)
  • EN 14780:2011 Solid biofuels - Sample preparation
  • EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
  • PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
  • EN ISO 948:2009 Spices and condiments - Sampling
  • EN 1482:1996 Sampling of Solid Fertilizers and Liming Materials (W)
  • EN ISO 3785:2023 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
  • EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
  • EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
  • EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
  • EN ISO 10564:1997 Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis ISO 10564: 1993
  • EN ISO 21646:2022 Solid recovered fuels - Sample preparation (ISO 21646:2022)

IT-UNI, Sample material sp

CU-NC, Sample material sp

  • NC 28-07-1986 Fertilizers. Raw Material and Finished Products. Sampling Method
  • NC 54-80-1985 Construotion Materials and Products, Asphalt. Sampling
  • NC 54-194-1985 Construction Materials and Products. Asphaltic Concrete Sampling
  • NC 54-07-1986 Construction Materials and Products. Lime Hydrate Sampling
  • NC 54-108-1985 Construction Materials and Products. Fresh Concrete Sampling Method
  • NC 54-392-1987 Construction Materials Concrete. Sampling
  • NC 54-287-1984 Construction Materials and Products. Soils. Test of Dynamic Penetration Using the Sampling Tube
  • NC 92-19-1986 Quality Control. Sampling of Solid Materials
  • NC 04-64-1985 Materials Testing, Materials Test-Pieces Made of Metallic Powders for Tensile Testing

PL-PKN, Sample material sp

Professional Standard - Nuclear Industry, Sample material sp

  • EJ/T 20162-2018 Dissolution method of plutonium material analysis sample
  • EJ/T 1017-1996 General principles for sampling nuclear material in the nuclear fuel cycle

International Organization for Standardization (ISO), Sample material sp

  • ISO 14820-3:2020 Fertilizers and liming materials — Sampling and sample preparation — Part 3: Sampling of static heaps
  • ISO 8656-1:1988 Refractory products; sampling of raw materials and unshaped products; part 1: sampling scheme
  • ISO 14488:2007 Particulate materials - Sampling and sample splitting for the determination of particulate properties
  • ISO 14488:2007/Amd 1:2019 Particulate materials — Sampling and sample splitting for the determination of particulate properties — Amendment 1
  • ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials
  • ISO 14820-1:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
  • ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 14820-2:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
  • ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
  • ISO 1927-3:2012 Monolithic (unshaped) refractory products - Part 3: Characterization as received
  • ISO 1927-2:2012 Monolithic (unshaped) refractory products - Part 2: Sampling for testing
  • ISO/DIS 9862 Geosynthetics — Sampling and preparation of test specimens
  • ISO/TR 20489:2018 Nanotechnologies — Sample preparation for the characterization of metal and metal-oxide nano-objects in water samples
  • ISO 10564:1993 Soldering and brazing materials; methods for the sampling of soft solders for analysis
  • ISO 948:1980 Spices and condiments; Sampling
  • ISO/TR 7553:1987 Fertilizers; Sampling; Minimum mass of increment to be taken to be representative of the total sampling unit
  • ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
  • ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
  • ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
  • ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
  • ISO 3785:2023 Metallic materials — Designation of test specimen axes in relation to product texture
  • ISO/FDIS 9862:2023 Geosynthetics — Sampling and preparation of test specimens
  • ISO 9862:2023 Geosynthetics — Sampling and preparation of test specimens
  • ISO 8007-1:1999 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks
  • ISO 8007-3:2003 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks
  • ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
  • ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
  • ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
  • ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
  • ISO 8007-2:1999 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes
  • ISO 842:1974 Raw materials for paints and varnishes — Sampling

未注明发布机构, Sample material sp

  • BS EN 1482-3:2016(2017) Fertilizers and liming materials — Sampling and sample preparation Part 3 : Sampling of static heaps
  • DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
  • BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
  • BS SP 142 and SP 143:1973+A3:2013 Specification for Solid rivets with 100 ° countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials Index form of title : Rivets, solid, 100 ° countersunk truncated radiused head, in L 86 and L 37 materials

ES-UNE, Sample material sp

  • UNE-EN 1482-3:2017 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps
  • UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
  • UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
  • UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

CEN - European Committee for Standardization, Sample material sp

  • EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps

PT-IPQ, Sample material sp

VN-TCVN, Sample material sp

National Metrological Verification Regulations of the People's Republic of China, Sample material sp

  • JJG(机械) 114-1992 SP-428 Verification Regulations for Electrostatic Photosensitive Material Electrical Performance Tester
  • JJG 354-1984 Verification Regulation of Standard Sample of the Magnetic Properties of Soft Magnetic Materials
  • JJG 406-1986 Verification Regulation for Standard Sample of Feebly Megnetic Materials
  • JJG 352-1984 Verification Regulation of Standard Sample of The Magnetic Properties of Permanent Magnet Materials

RO-ASRO, Sample material sp

YU-JUS, Sample material sp

  • JUS B.D8.102-1981 Refractoriez Sampling shaped refractorl products
  • JUS D.A8.030-1983 Standard atmosphere for conditioning of samples and test pieces of wood and vvood-based boards
  • JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties
  • JUS B.B0.001-1984 Natural aggregates and stone. Sampling
  • JUS H.C8.030-1989 Rav materials for paints and varnishes. Sampling

IN-BIS, Sample material sp

国家市场监督管理总局、中国国家标准化管理委员会, Sample material sp

  • GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
  • GB/T 37469-2019 Space materials science experiment—Management standard for samples
  • GB/T 37844-2019 Space materials science experiment—Preparation specification for solid experiment sample
  • GB/T 40238-2021 Reaction to fire tests for building materials and products—General rules for selection of substrates, conditioning and mounting of specimen
  • GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars

FI-SFS, Sample material sp

UY-UNIT, Sample material sp

CH-SNV, Sample material sp

HU-MSZT, Sample material sp

RU-GOST R, Sample material sp

  • GOST 27795-1988 Photographic materials. Sampling
  • GOST 32268-2013 Bituminous materials. Sampling
  • GOST R ISO 11648-2-2009 Statistical methods. Sampling from bulk materials. Part 2. Sampling of particulate materials
  • GOST R 50801-1995 Wood raw material, forest products, semi-produced materials and wood products. Sampling rules and methods of measuring specific activity of radionuclides
  • GOST R 57569-2017 Polymer composites. Test method for fatigue of samples with open hole
  • GOST R 57734-2017 Polymer composites. Determination of impact energy to break sample
  • GOST R 57715-2017 Polymer composites. Determination of impact energy to break sample
  • GOST EN 1482-1-2013 Fertilizers and liming materials. Sampling and preparation of samples. Part 1. Sampling
  • GOST EN 1482-2-2013 Fertilizers and liming materials. Sampling and sample preparation. Part 2. Sample preparation.
  • GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
  • GOST ISO 9862-2014 Geosynthetics. Sampling and preparation of test specimens
  • GOST 18227-1998 Sintered metal materials (excluding hardmetals). Tensile test pieces
  • GOST 28876-1990 Spices and condiments. Sampling
  • GOST 22871-1977 Ground feldsparic and quartzfeldsparic materials. Rules of reception. Methods of sampling and sample preparation for testing
  • GOST 8.315-1997 State system for enshuring the uniformity of measurements. Certified reference materials of composition and properties of substances and materials. Basic principles
  • GOST 8.315-1991 State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use
  • GOST 26565-1985 Unshaped refractories. Methods of sampling and preparation
  • GOST R ISO 8007-3-2014 Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Part 3. Sidewall blocks
  • GOST R ISO 8007-2-2014 Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Part 2. Prebaked anodes
  • GOST R 51830-2001 Evaluation of biological hazard of medical dental materials and articles. Classification and sampling
  • GOST 8.532-2002 State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Interlaboratory metrological certification. Content and order of works
  • GOST 31576-2012 Evaluation of biological hazard of medical dental materials and articles. Classification and sampling

TH-TISI, Sample material sp

NL-NEN, Sample material sp

  • NEN 2584-1986 Shaped refractory products - Sampling and acceptance testing
  • NEN 3328-1967 Feeding stuffs. Directions for handling samples
  • NEN 3010-1991 Solid mineral fuels - Sampling and sample preparation of coal

ES-AENOR, Sample material sp

Taiwan Provincial Standard of the People's Republic of China, Sample material sp

  • CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size
  • CNS 14393.12-2005 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
  • CNS 14393-12-2005 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
  • CNS 11743-1986 Method of Sampling for Castable Refractories
  • CNS 2770-2-1986 Method of Test for Feeds : Preparation of Test Samples

AT-ON, Sample material sp

Korean Agency for Technology and Standards (KATS), Sample material sp

  • KS Q ISO 11648-2-2016(2021) Statistical aspects of sampling from bulk materials－Part 2：Sampling of particulate materials
  • KS K ISO 9862-2012(2017) Geosynthetics－Sampling and preparation of test specimens
  • KS K ISO 9862-2012(2022) Geosynthetics－Sampling and preparation of test specimens
  • KS B ISO 10564:2005 Soldering and brazing materials－Methods for the sampling of soft solders for analysis
  • KS M ISO 8007-1:2003 Carbonaceous materials used in the production of aluminium-Sampling plans and sampling from individual units-Part 1:Cathode blocks
  • KS M ISO 8007-3:2010 Carbonaceous materials used in the production of aluminium-Sampling plans and sampling from individual units-Part 3:Sidewall blocks
  • KS M ISO 8007-1:2013 Carbonaceous materials used in the production of aluminium－Sampling plans and sampling from individual units－Part 1：Cathode blocks
  • KS M ISO 8007-3:2013 Carbonaceous materials used in the production of aluminium－Sampling plans and sampling from individual units－Part 3：Sidewall blocks
  • KS M ISO 7742-2007(2012) Solid fertilizers－Reduction of samples
  • KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
  • KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
  • KS C IEC 60404-14:2022 Magnetic materials — Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • KS M ISO 8007-2:2003 Carbonaceous materials used in the production of aluminium-Sampling plans and sampling from individual units-Part 2:Prebaked anodes
  • KS M ISO 8007-2:2013 Carbonaceous materials used in the production of aluminium－Sampling plans and sampling from individual units－Part 2：Prebaked anodes
  • KS M ISO 15528:2003 Paints, varnishes and raw materials for paints and varnishes-Sampling
  • KS M ISO 15528:2015 Paints, varnishes and raw materials for paints and varnishes－Sampling
  • KS K ISO 13437:2022 Geosynthetics — Installing and retrieving samples in the field for durability assessment
  • KS D 0039-1982 Method for sampling of precious brazing filler metals
  • KS L 3502-1987(1997) SAMPLING METHOD FOR CASTABLE REFRACTORIES
  • KS B 0801-2007(2022) Test pieces for tensile test for metallic materials
  • KS B 0809-2001(2021) Test pieces for impact test for metallic materials
  • KS B 0809-2001(2016) Test pieces for impact test for metallic materials
  • KS L 3502-1987 SAMPLING METHOD FOR CASTABLE REFRACTORIES
  • KS L 3502-1982 SAMPLING METHOD FOR CASTABLE REFRACTORIES
  • KS Q ISO 11648-2:2009 Statistical aspects of sampling from bulk materials-Part 2:Sampling of particulate materials
  • KS Q ISO 11648-2:2016 Statistical aspects of sampling from bulk materials－Part 2：Sampling of particulate materials

SE-SIS, Sample material sp

American Society for Testing and Materials (ASTM), Sample material sp

  • ASTM D7308-17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
  • ASTM D3665-99 Standard Practice for Random Sampling of Construction Materials
  • ASTM E1287-89(1999) Standard Practice for Aseptic Sampling of Biological Materials
  • ASTM D140/D140M-16 Standard Practice for Sampling Asphalt Materials
  • ASTM D7308-17(2022) Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
  • ASTM D7308-07(2012) Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
  • ASTM C903-15 Standard Practice for Preparing Refractory Specimens by Cold Gunning
  • ASTM D7308-07 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
  • ASTM E401-70(1989)e1 Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample material sp

The American Road & Transportation Builders Association, Sample material sp

Society of Automotive Engineers (SAE), Sample material sp

Indonesia Standards, Sample material sp

ZA-SANS, Sample material sp

  • SANS 11648-2:2005 Statistical aspects of sampling from bulk materials Part 2: Sampling of particulate materials
  • SANS 5983:2000 Preparation of test specimens for moisture content determination in timber and timber products
  • SANS 81:2004 Width of a textile fabric sample

CL-INN, Sample material sp

Professional Standard - Ferrous Metallurgy, Sample material sp

  • YB/T 4143-2006 Rules for checking the homogeneity of materials used in the preparation of reference samples

American National Standards Institute （ANSI), Sample material sp

API - American Petroleum Institute, Sample material sp

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sample material sp

  • GB/T 36085-2018 Nanotechnologies—Guidance for developing representative test materials consisting of nano-objects in dry powder form

Professional Standard - Aviation, Sample material sp

  • HB/Z 209-1991 Specification for sampling of samples for gas analysis of metallic materials

SG-SPRING SG, Sample material sp

  • SS ISO 10564:1993 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis
  • SS 285 AMD 1-1984 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis

Military Standards (MIL-STD), Sample material sp

KR-KS, Sample material sp

European Association of Aerospace Industries, Sample material sp

  • AECMA PREN 2375-1989 Aerospace Series Resin Preimpregnated Materials Production Batch Sampling Procedure Edition 1

BE-NBN, Sample material sp

Professional Standard - Commodity Inspection, Sample material sp

  • SN/T 1323-2003 Rules for the sampling of metal material for import and export

AASHTO - American Association of State Highway and Transportation Officials, Sample material sp

  • R 66-2015 Standard Practice for Sampling Asphalt Materials

Jilin Provincial Standard of the People's Republic of China, Sample material sp

Professional Standard - Aerospace, Sample material sp

  • QJ 3041-1998 Sampling method for re-examination of non-metallic materials

  Sample Preparation and Reference Materials, Standard sample of refractory material, Refractory samples, Material sample analysis, Material sample analysis, material sample, Sample Material Requirements, sample material, Material plate sample, Material sample request, Material sample request, Sample Preparation Materials, Sample Material Analysis, on material samples, Sample material sp, Sample material sp, sample material, Analyzing material samples, Material sample box, sp sample.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved