ZH

RU

ES

Inversion time

Inversion time, Total:269 items.

In the international standard classification, Inversion time involves: Quantities and units, Measurement of time, velocity, acceleration, angular velocity, Telecommunication systems, Lubricants, industrial oils and related products, Photography, Fluid power systems, Nuclear energy engineering, Semiconductor devices, Medical equipment, Meat, meat products and other animal produce, Electronic tubes, Electronic display devices, Aerospace electric equipment and systems, Thermodynamics and temperature measurements, Soil quality. Pedology, Protection of and in buildings, Linear and angular measurements, Radiocommunications, Character symbols, Plastics, Open systems interconnection (OSI), Fibre optic communications, Road vehicle systems, Veterinary medicine, Products of the textile industry, Analytical chemistry, Installations in buildings, Organic chemicals, Applications of information technology, Construction materials, Paints and varnishes, Languages used in information technology, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Petroleum products in general, Character sets and information coding, Waxes, bituminous materials and other petroleum products, Road engineering, Information sciences. Publishing, Mobile services, Equipment for the chemical industry, Optics and optical measurements, Paper and board, Measurement of volume, mass, density, viscosity, Farming and forestry, Optoelectronics. Laser equipment, Interface and interconnection equipment, Telecommunication terminal equipment, Audio, video and audiovisual engineering, Electrical and electronic testing, Fuels, Networking.


German Institute for Standardization, Inversion time

  • DIN 5483-1:1983 Time-dependent quantities; terms for the time-dependency
  • DIN 19745:2006 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
  • DIN V 32879-1:1995 Optoelectronic measurement of distance using time-of-flight principle - Part 1: Incoherent time-of-flight principle
  • DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
  • DIN EN 62374:2008-02 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007); German version EN 62374:2007
  • DIN 19242-5:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: matrix inversion
  • DIN EN ISO 14935:1998 Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935:1998); German version EN ISO 14935:1998
  • DIN EN ISO 12381:2019-12 Health informatics - Explicit time-related expressions for healthcare-specific problems (ISO 12381:2019); English version EN ISO 12381:2019
  • DIN EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
  • DIN 51562-3:1985 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
  • DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
  • DIN IEC/TS 61934:2012 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses (IEC/TS 61934:2011)
  • DIN EN 62374-1:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (IEC 62374-1:2010); German version EN 62374-1:2010 + AC:2011
  • DIN EN ISO 12381:2019 Health informatics - Explicit time-related expressions for healthcare-specific problems (ISO 12381:2019); English version EN ISO 12381:2019
  • DIN EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006);English version of DIN EN ISO 11554:2008-11

International Telecommunication Union (ITU), Inversion time

  • ITU-T G.8273/Y.1368-2013 Framework of phase and time clocks
  • ITU-T Y.1368-2013 Framework of phase and time clocks (Study Group 15)
  • ITU-T G.8273/Y.1368 AMD 2-2015 Framework of phase and time clocks; Amendment 2
  • ITU-T G.8273/Y.1368 AMD 1-2015 Framework of phase and time clocks; Amendment 1
  • ITU-R REPORT BT.1081-1-1990 The relative timing of sound and picture signals
  • ITU-T G.8275.1-2014 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network (Study Group 15)
  • ITU-T G.8271/Y.1366-2017 Time and phase synchronization aspects of telecommunication networks
  • ITU-T G.8275.1/Y.1369.1-2016 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network
  • ITU-T G.8275.2/Y.1369.2-2016 Precision time protocol telecom profile for time/phase synchronization with partial timing support from the network
  • ITU-R TF.1010-1 FRENCH-1997 Relativistic effects in a coordinate time system in the vicinity of the Earth
  • ITU-R TF.1010-1 SPANISH-1997 Relativistic effects in a coordinate time system in the vicinity of the Earth
  • ITU-R TF.1010-1-1997 Relativistic Effects in a Coordinate Time System in the Vicinity of the Earth
  • ITU-T G.8275.1/Y.1369.1 AMD 1-2017 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network;Amendment 1
  • ITU-T G.8275.1/Y.1369.1 AMD 2-2021 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network; Amendment 2
  • ITU-T G.8275.1/Y.1369.1 AMD 1-2020 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network; Amendment 1
  • ITU-T G.8275.2/Y.1369.2 AMD 1-2017 Precision time protocol telecom profile for time/phase synchronization with partial timing support from the network; Amendment 1
  • ITU-T G.8275.2/Y.1369.2 AMD 1-2020 Precision time protocol telecom profile for time/phase synchronization with partial timing support from the network; Amendment 1
  • ITU-T G.8275.2/Y.1369.2 AMD 2-2021 Precision time protocol telecom profile for time/phase synchronization with partial timing support from the network; Amendment 2
  • ITU-R TF.2018-2012 Relativistic time transfer in the vicinity of the Earth and in the solar system
  • ITU-T G.8275.1 AMD 1-2020 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network Amendment 1 (Study Group 15)
  • ITU-T Y.1369.1 AMD 1-2020 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network Amendment 1 (Study Group 15)
  • ITU-T F.190-1992 OPERATIONAL PROVISIONS FOR THE INTERNATIONAL FACSIMILE SERVICE BETWEEN PUBLIC BUREAUX AND SUBSCRIBER STATIONS AND VICE VERSA (BUREAUFAX-TELEFAX AND VICE VERSA) (Study Group I)
  • ITU-T Y.1369.2 AMD 1-2020 Precision time protocol telecom profile for phase/time synchronization with partial timing support from the network Amendment 1 (Study Group 15)
  • ITU-T Y.1366-2012 Time and phase synchronization aspects of packet networks (Study Group 15)
  • ITU-T G.8271-2012 Time and phase synchronization aspects of packet networks (Study Group 15)
  • ITU-T G.8275/Y.1369-2017 Architecture and requirements for packet-based time and phase distribution
  • ITU-T D.61 SPANISH-1993 CHARGING AND ACCOUNTING PROVISIONS RELATING TO THE MEASUREMENT OF THE CHARGEABLE DURATION OF A TELEX CALL
  • ITU-T E.260 SPANISH-1993 BASIC TECHNICAL PROBLEMS CONCERNING THE MEASUREMENT AND RECORDING OF CALL DURATIONS
  • ITU-R QUESTION 271-2005 Interference between satellite news gathering (SNG) carriers by unintentional access
  • ITU-T G.8271 AMD 1-2013 Time and phase synchronization aspects of packet networks Amendment 1 (Study Group 15)
  • ITU-T G.8275/Y.1369 AMD 1-2021 Architecture and requirements for packet-based time and phase distribution; Amendment 1
  • ITU-T Y.1369-2013 Architecture and requirements for packet-based time and phase distribution (Study Group 15)
  • ITU-R TF.537-1978 (WITHDRAWN) Reduction of Mutual Interference between Emissions of the Standard-Frequency and Time-Signal Service on the Allocated Frequencies in Bands 6 and 7 - Section 7C - Systems for Dissemination and Comparison
  • ITU-T G.8275 AMD 1-2015 Architecture and requirements for packet-based time and phase distribution Amendment 1 (Study Group 15)
  • ITU-T G.8275 AMD 1-2021 Architecture and requirements for packet-based time and phase distribution Amendment 1 (Study Group 15)
  • ITU-T Y.1369 AMD 1-2021 Architecture and requirements for packet-based time and phase distribution Amendment 1 (Study Group 15)
  • ITU-T Y.1369 AMD 1-2015 Architecture and requirements for packet-based time and phase distribution Amendment 1 (Study Group 15)
  • ITU-T X.748-1999 Information Technology - Open Systems Interconnection - Systems Management: Response Time Monitoring Function - Series X: Data Networks and Open System Communications OSI Management - Management Functions and ODMA Functions
  • ITU-R OPINION 97-1997 Operational Use of Geostationary Direct TV Satellites for Time Transfer Study Groups 4, 10 and 11
  • ITU-R REPORT RS.2185-2010 Study on compatibility between “arrival time difference” (ATD) stations of the meteorological aids service and stations of the radionavigation service in the frequency band 9 to 14 kHz

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Inversion time

  • ITU-R TF.2118-0-2018 Transfert de temps relativiste
  • ITU-R BT.1359-1998 Relative Timing of Sound and Vision for Broadcasting
  • ITU-R TF.538-2-1992 Frequency and Time (Phase) Instability Measures Section 7D - Characterization of Sources and Time Scales Formation
  • ITU-R TF.1010-1994 Relativistic Effects in a Coordinate Time System in the Vicinity of the Earth
  • ITU-R TF.538-1-1990 Frequency and Phase Stability Measures - Section 7D - Characterization of Sources and Time Scales Formation

RO-ASRO, Inversion time

  • STAS 56-1984 MINERAL OILS Dctermination of demulsification time
  • STAS 9835/2-1990 Photography STILL GAMERAS. CAMERA SHUTTERS EXPOSURE TIME MARKING

RU-GOST R, Inversion time

  • GOST 12068-1966 Mineral oils. Method for determination of demulsification time
  • GOST 25183.3-1982 Photographic gelatine. Method of determination of dissolution duration
  • GOST 18986.8-1973 Semiconductor diodes. Method for measuring reverse recovery time
  • GOST 25024.2-1983 Signal produce displays. Measuring methods of response and relaxation time
  • GOST 18604.1-1980 Transistors bipolar. Method for measuring collector-tobase time constant at high frequencies
  • GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • GOST R 59741-2021 Optics and photonics. Lasers and laser-related equipment. Test methods for laser radiation power, energy and temporal characteristics
  • GOST R EN 12916-2008 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection

PL-PKN, Inversion time

  • PN N84509-1992 Photography. Camera shutters. Timing
  • PN T01504-59-1987 Diodes Measuring methods Reverse recovery time t? and reverse recovery current i,r
  • PN N84518-1993 Photography. Expendable photoflash lamps (without integral reflector). Definitions and requirements for luminous flux/time characteristics

Taiwan Provincial Standard of the People's Republic of China, Inversion time

  • CNS 5143-1980 Still Cameras-Shutter Exposure-Time Markings
  • CNS 12504-1989 Expendable Photoflash Lamps (Without Integral Reflector)-- Definitions and Requirements for Luminous Flux/Time Characteristics
  • CNS 10698-1994 Method of Test for Land Mobile Communication FM or PM Receiver, 25-947MH`7|(Squelch Blocking, Receiver Attack and Closing Time)

IETF - Internet Engineering Task Force, Inversion time

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Inversion time

  • GB/T 8338-2023 Camera shutter time measurement
  • GB/T 42887-2023 Measurement of shooting time lag, shutter time lag, shooting speed and power-on time of digital cameras
  • GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

American National Standards Institute (ANSI), Inversion time

  • ANSI/NFPA T3.21.8-1990 Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves
  • ANSI/EIA 318-B:1996 Measurement of Reverse Recovery Time for Semiconductor Signal Diodes / Note: Approved 1999-04-00.
  • ANSI/ASTM D1901:2000 Test Method for Relative Evaportation Time of Halogenated Organic Solvents and their Admixtures
  • ANSI/TAPPI T1214 sp-2012 Interrelation of reflectance, R0; reflectivity, R8; TAPPI opacity, C0.89; scattering, s; and absorption, k

International Organization for Standardization (ISO), Inversion time

  • ISO 15781:2013 Photography - Digital still cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
  • ISO 15781:2015 Photography - Digital still cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
  • ISO 516:1999 Photography - Camera shutters - Timing
  • ISO 15781:2019 Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag
  • ISO 2691:1987 Photography; Expendable photoflash lamps (witout integral reflector); Defintions and requirements for luminous flux/time characteristics
  • ISO 516:1973 Photography — Still cameras — Shutter exposure-time markings
  • ISO 3854:1976 Road vehicles — Caravans and light trailers — Vacuum braking — Measurement of reaction time
  • ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • ISO 12381:2019 Health informatics — Explicit time-related expressions for healthcare-specific problems
  • ISO 10503:1991 Photography — Expendable reflectored photoflash lamp arrays — Definitions and requirements for luminous flux/time characteristics
  • ISO/IEC TR 19075-2:2015 Information technology — Database languages — SQL Technical Reports — Part 2: SQL Support for Time-Related Information
  • ISO/CD 11554 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
  • ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
  • ISO 11554:2003 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
  • ISO/IEC 13818-1:2015/Amd 1:2015/Cor 2:2016 Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems - Amendment 1: Delivery of timeline for external data - Technical Corrigendum 2: Delivery of timeline for external data; Technical Corrigendum 1

Korean Agency for Technology and Standards (KATS), Inversion time

  • KS A ISO 516:2003 Photography-Camera shutters-Timing
  • KS C IEC 61224:2012 Nuclear reactors-Response time in resistance temperature detectors(RTD)-In situ measurements
  • KS W 7205-1990 Aircraft Internal Time Division Command / Response Multiplex Data Bus
  • KS C IEC 61224-2012(2022) Nuclear reactors-Response time in resistance temperature detectors(RTD)-In situ measurements
  • KS C IEC 61224-2012(2017) Nuclear reactors-Response time in resistance temperature detectors(RTD)-In situ measurements
  • KS K ISO 9073-13:2021 Textiles — Test methods for nonwovens —Part 13: Repeated liquid strike-through time
  • KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • KS M ISO 11357-5:2015 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • KS M ISO 11357-5-2015(2020) Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • KS R ISO 23132:2022 Road vehicles — Extended Vehicle (ExVe) time critical applications —General requirements, definitions and classification methodology of time-constrained situations related to Road and ExVe Safety (REx
  • KS B ISO 11554-2015(2020) Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
  • KS X ISO/IEC 15507-2003(2018)

Professional Standard - Machinery, Inversion time

CZ-CSN, Inversion time

  • CSN 35 8745-1984 Transistors. Method of feedback circuit time constant measuring
  • CSN 35 8764-1976 Semicoaductor devices. Switching diodes. Measurement o? reverse recovery time.
  • CSN 65 6217-1971 Determination of the relative fflux time by Engler pparatus
  • CSN 35 8745-1973 Semiconductor devices. Transistore. Measurement of open-circuit reverse voltage transfer ratio and tinie coefíicient at high frequencies

British Standards Institution (BSI), Inversion time

  • BS ISO 15781:2015 Photography. Digital still cameras. Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
  • BS ISO 15781:2013 Photography. Digital still cameras. Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
  • BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
  • BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
  • BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • BS ISO/IEC 19075-2:2021 Information technology. Guidance for the use of database language SQL. Time-related information
  • BS PD ISO/IEC TR 19075-2:2015 Information technology. Database languages. SQL Technical Reports. SQL Support for Time-Related Information
  • BS ISO 23132:2020 Road vehicles. Extended Vehicle (ExVe) time critical applications. General requirements, definitions and classification methodology of timeconstrained situations related to Road and ExVe Safety (RExVeS)
  • 19/30390754 DC BS ISO 23132. Road vehicles. Extended Vehicle (ExVe) time critical applications. General requirements, definitions and classification methodology of time-constrained situations related to Road and ExVe Safety (RExVeS)
  • BS EN ISO 12381:2019 Health informatics. Explicit time-related expressions for healthcare-specific problems
  • 20/30413966 DC BS ISO/IEC 19075-2. Information technology. Guidance for the use of database language SQL. Part 2. Time-related information
  • BS EN ISO 11554:2017 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
  • BS EN ISO 11554:2009 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
  • BS EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics

IN-BIS, Inversion time

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Inversion time

  • JEDEC EIA-318-B-1996 Measurement of Reverse Recovery Time for Semiconductor Signal Diodes [Replaced: JEDEC 318-1]

Japanese Industrial Standards Committee (JISC), Inversion time

  • JIS Z 4901:1993 Mirror cameras for chest indirect radiography
  • JIS C 7611:1989 Method of determining the luminous flux versus time characteristics and the light output of photoflash lamps

Professional Standard - Electron, Inversion time

  • SJ 378-1973 Measurement of oscillation stability time of reflex klystron

American Society for Testing and Materials (ASTM), Inversion time

  • ASTM E2046-08 Standard Test Method for Reaction Induction Time by Thermal Analysis
  • ASTM E2046-99 Standard Test Method for Reaction Induction Time by Thermal Analysis
  • ASTM E2046-03 Standard Test Method for Reaction Induction Time by Thermal Analysis
  • ASTM E2046-19 Standard Test Method for Reaction Induction Time by Thermal Analysis
  • ASTM E2046-14 Standard Test Method for Reaction Induction Time by Thermal Analysis
  • ASTM D4616-95(2005) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
  • ASTM D6780-05 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
  • ASTM D5483-02e1 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • ASTM D5483-95 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • ASTM D5483-05(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • ASTM D5483-05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • ASTM C1735-17 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
  • ASTM D4616-95(2000) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D4616-95 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D4616-95(2018) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D4616-95(2008) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D4616-95(2013) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D1901-00(2004) Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • ASTM D1901-00 Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • ASTM D1901-10(2020) Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • ASTM D1901-10(2015) Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • ASTM D1901-10 Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures

GB-REG, Inversion time

Standard Association of Australia (SAA), Inversion time

Lithuanian Standards Office , Inversion time

  • LST ISO 80000-3:2006 Quantities and units - Part 3: Space and time (identical ISO 80000-3:2006)
  • LST EN 61300-3-21-2002 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-21: Examinations and measurements. Switching time and bounce time (IEC 61300-3-21:1998)
  • LST EN 62374-1-2011 Semiconductor devices -- Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (IEC 62374-1:2010)
  • LST EN 62374-1-2011/AC-2011 Semiconductor devices -- Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (IEC 62374-1:2010)
  • LST ISO/IEC 18014-1:2009 Information technology - Security techniques -Time-stamping services - Part 1: Framework (ISO/IEC 18014-1:2008, identical)
  • LST EN 62374-2008 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007)
  • LST ISO 8601:2006 Data elements and interchange formats - Information interchange - Representation of dates and times (identical ISO 8601:2004)

Danish Standards Foundation, Inversion time

  • DS/ISO 15781:2013 Photography - Digital still cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
  • DS/EN 61300-3-21:1998 Fibre optic interconnection devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time
  • DS/EN 62374-1/AC:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
  • DS/EN 62374-1:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
  • DS/ISO/IEC 19075-2:2021 Information technology – Guidance for the use of database language SQL – Part 2: Time-related information
  • DS/EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
  • DS/EN ISO 10848-2:2006 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2: Application to light elements when the junction has a small influence
  • DS/EN ISO 10848-2/AC:2007 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2: Application to light elements when the junction has a small influence

International Electrotechnical Commission (IEC), Inversion time

  • IEC 61224:1993 Nuclear reactors; response time in resistance temperature detectors (RTD); in situ measurements
  • IEC 62374-1:2010 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
  • IEC TS 61934:2006 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
  • IEC TS 61934:2011 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
  • IEC 62374:2007 Semiconductor devices - Time dependent dielectric breakdown (TDDB) test for gate dielectric films
  • ISO/IEC 19075-2:2021 Information technology - Guidance for the use of database language SQL - Part 2: Time-related information
  • IEC 62337:2012/COR1:2012 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones; Corrigendum 1

American Society of Mechanical Engineers (ASME), Inversion time

Guangdong Provincial Standard of the People's Republic of China, Inversion time

  • DB44/T 1832-2016 Measurement of shooting time lag, shutter time lag, shooting speed and start-up time of digital cameras in photography

AENOR, Inversion time

  • UNE-EN 61300-3-21:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-21: Examinations and measurements - Switching time and bounce time
  • UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Inversion time

  • ITU-T Y.1369.1-2016 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network (Study Group 15)
  • ITU-T Y.1369.1 AMD 1-2017 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network Amendment 1 (Study Group 15)
  • ITU-T G.8275.1 AMD 1-2017 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network Amendment 1 (Study Group 15)
  • ITU-T Y.1369.1 AMD 2-2018 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network Amendment 2 (Study Group 15)
  • ITU-T G.8275.2 AMD 1-2017 Precision time protocol telecom profile for phase/time synchronization with partial timing support from the network Amendment 1 (Study Group 15)
  • ITU-T G.8275.1 AMD 2-2018 Precision time protocol telecom profile for phase/time synchronization with full timing support from the network Amendment 2 (Study Group 15)
  • ITU-T G.8271-2016 Time and phase synchronization aspects of packet networks (Study Group 15)
  • ITU-T Y.1366-2016 Time and phase synchronization aspects of packet networks (Study Group 15)
  • ITU-T Y.1366-2017 Time and phase synchronization aspects of telecommunication networks (Study Group 15)
  • ITU-T G.8271-2017 Time and phase synchronization aspects of telecommunication networks (Study Group 15)
  • ITU-T Y.1369.2-2016 Internet protocol aspects – Transport Precision time protocol telecom profile for phase/time synchronization with partial timing support from the network (Study Group 15)
  • ITU-T G.8275.1-2016 Internet protocol aspects – Transport Precision time protocol telecom profile for phase/time synchronization with full timing support from the network (Study Group 15)
  • ITU-T G.8275-2013 Architecture and requirements for packet-based time and phase distribution (Study Group 15)
  • ITU-T G.8271 AMD 2-2015 Time and phase synchronization aspects of packet networks Amendment 2 (Study Group 15)
  • ITU-T Y.1366 AMD 1-2018 Time and phase synchronization aspects of telecommunication networks Amendment 1 (Study Group 15)
  • ITU-T G.8271 AMD 1-2018 Time and phase synchronization aspects of telecommunication networks Amendment 1 (Study Group 15)
  • ITU-T G.8271.1 AMD 2-2018 Time and phase synchronization aspects of telecommunication networks Amendment 2 (Study Group 15)
  • ITU-T Y.1366 AMD 2-2018 Time and phase synchronization aspects of telecommunication networks Amendment 2 (Study Group 15)
  • ITU-T Y.1369 AMD 1-2018 Architecture and requirements for packet-based time and phase distribution Amendment 1 (Study Group 15)
  • ITU-T G.8275.1 AMD 1-2018 Architecture and requirements for packet-based time and phase distribution Amendment 1 (Study Group 15)

American Nuclear Society (ANS), Inversion time

  • ANS 58.8-1994 Time Response Design Criteria for Safety-Related Operator Actions
  • ANS 58.8-1994(R2008) Time Response Design Criteria for Safety-Related Operator Actions

Group Standards of the People's Republic of China, Inversion time

  • T/CVMA 95-2022 TRFIA for detection of antibodies against Peste des Petits Ruminants Virus

Military Standard of the People's Republic of China-General Armament Department, Inversion time

  • GJB 840.5-1990 Anti-tank track mine finalization test procedures and safety time test methods

Association Francaise de Normalisation, Inversion time

  • FD X50-138:2006 Project management - Time-related management - Organisation, Planing, Coordination
  • NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • NF EN ISO 11357-5:2014 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5 : détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation
  • NF C96-017-1*NF EN 62374-1:2011 Semiconductor devices - Part 1 : time-dependent dielectric breakdown (TDDB) test for inter-metal layers.
  • NF S97-524*NF EN ISO 12381:2019 Health informatics - Explicit time-related expressions for healthcare-specific problems
  • NF EN 62374:2008 Dispositifs à semiconductors - Essai de rupture diélectrique en fonction du temps (TDDB) pour films diélectriques de grille
  • NF S10-121:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
  • NF S10-121*NF EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment- Test methods for laser beam power, energy and temporal characteristics
  • NF EN 60909-3:2010 Courants de court-circuit dans les réseaux triphasés à courant alternatif - Partie 3 : courants durant deux court-circuits monophasés simultanés séparés à la terre et courants de court-circuit partiels s'écoulant à travers la terre

ISA - International Society of Automation, Inversion time

  • ISA 67.06-1984 Response Time Testing of Nuclear Safety-Related Instrument Channels in Nuclear Power Plants

ANS - American Nuclear Society, Inversion time

  • 58.8-1994 Time Response Design Criteria for Safety-Related Operator Actions
  • 58.8-1984 TIME RESPONSE DESIGN CRITERIA FOR NUCLEAR SAFETY RELATED OPERATOR ACTIONS

Professional Standard - Aviation, Inversion time

  • HB/Z 217-1992 Strain Energy Time-Dependent Fatigue Life Prediction Method Instructions

KR-KS, Inversion time

  • KS K ISO 9073-13-2021 Textiles — Test methods for nonwovens —Part 13: Repeated liquid strike-through time
  • KS R ISO 23132-2022 Road vehicles — Extended Vehicle (ExVe) time critical applications —General requirements, definitions and classification methodology of time-constrained situations related to Road and ExVe Safety (REx

未注明发布机构, Inversion time

  • BS EN 62374-1:2010(2011) Semiconductor devices Part 1 : Time - dependent dielectric breakdown (TDDB) test for inter - metal layers
  • BS EN ISO 11554:2017(2020) Optics and photonics — Lasers and laser - related equipment — Test methods for laser beam power, energy and temporal characteristics

VE-FONDONORMA, Inversion time

国家市场监督管理总局、中国国家标准化管理委员会, Inversion time

  • GB/T 37849-2019 Method of performance testing for liquid chromatography tandem time of flight mass spectrometry
  • GB/T 38396-2019 Pitch products of coal carbonization—Determination of mesophase content—Microscopical analysis by reflected light

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Inversion time

  • ASHRAE DA-07-051-2007 An Experimental Investigation of Response Times for Duct-Mounted Relative Humidity Transmitters

IECQ - IEC: Quality Assessment System for Electronic Components, Inversion time

  • QC 210018-2004 Ferrite cores Technology approval schedule (TAS) (Same as IEC TS 62398:2004)

Professional Standard - Energy, Inversion time

  • NB/T 20379-2016 Time response design criteria for safety-related operator actions in nuclear power plants

European Committee for Standardization (CEN), Inversion time

  • EN ISO 12381:2019 Health informatics - Explicit time-related expressions for healthcare-specific problems (ISO 12381:2019)
  • EN ISO 11554:1998 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power, Energy and Temporal Characteristics ISO 11554:1998
  • EN ISO 11554:2003 Optics and optical instruments Lasers and laser-related equipment Test methods for laser beam power, energy and temporal characteristics
  • EN ISO 11554:2017 Optics and photonics -Lasers and laser-related equipment - Test methods for laser beam power@ energy and temporal characteristics
  • prEN ISO 11554 rev Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
  • EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

US-FCR, Inversion time

  • FCR COE CRD-C 311-69-1969 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR DRYING TIME AND REFLECTANCE BY THE MEMBRANE FORMED BY A CONCRETE CURING COMPOUND

European Committee for Electrotechnical Standardization(CENELEC), Inversion time

  • EN 62374-1:2010 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (Incorporating Corrigendum April 2011)

ESDU - Engineering Sciences Data Unit, Inversion time

  • ESDU 84020-1984 An introduction to time-dependent aerodynamics of aircraft response@ gusts and active controls.
  • SPA-M9-2-2008 A study of deposit formation in a micro-bomb reactor (MBR): effect of residence time - Sept. 08 update.

TH-TISI, Inversion time

  • TIS 285 Pt.10-1981 Standard methods of test for paints, varnishes and related materials. Part 10: Hard-drying time

International Commission on Illumination (CIE), Inversion time

  • CIE 212-2014 Guidance towards Best Practice in Psychophysical Procedures Used when Measuring Relative Spatial Brightness

ES-UNE, Inversion time

  • UNE-EN ISO 12381:2019 Health informatics - Explicit time-related expressions for healthcare-specific problems (ISO 12381:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
  • UNE-EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)

NATO - North Atlantic Treaty Organization, Inversion time

  • STANAG 1001-1994 Standardized System of Designating Days and Hours in Relation to an Operation or Exercise (ED 7 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2
  • STANAG 1001-1991 Standardized System of Designating Days and Hours in Relation to an Operation or Exercise (ED 6 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2
  • STANAG 1001-1982 Standardized System of Designating Days and Hours in Relation to an Operation or Exercise (ED 5 AMD 4; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2

US-CFR-file, Inversion time

  • CFR 45-156.929-2013 Public Welfare. Part156:Health insurance issuer standards under the Affordable Care Act, including standards related to exchanges. Section156.929:Computation of time and extensions of time.

CENELEC - European Committee for Electrotechnical Standardization, Inversion time

  • EN 60255-3:1998 Electrical Relays Part 3: Single Input Energizing Quantity Measuring Relays with Dependent or Independent Time

Professional Standard - Aerospace, Inversion time

  • QJ 10014.5-2011 Space systems.Safety and compatibility of materials.Part 5:Determination of reactivity of system/component materials with aerospace propellants

U.S. Air Force, Inversion time

  • AIR FORCE MIL-T-9885 A-1963 TIME COMPLIANCE TECHNICAL ORDERS: FOR SURFACE- LAUNCHED MISSILES, SPACE VEHICLES AND RELATED SUPPORT EQUIPMENT PREPARATION OF

Anhui Provincial Standard of the People's Republic of China, Inversion time

  • DB34/T 2820-2017 Determination of 330 pesticide residues in Chinese herbal medicines by liquid chromatography quadrupole time-of-flight tandem mass spectrometry

Professional Standard - Agriculture, Inversion time

  • SN/T 5493-2023 Determination of 29 Fentanyls in Solid and Liquid Samples by Liquid Chromatography-Quadrupole/Time-of-Flight Mass Spectrometry

CEN - European Committee for Standardization, Inversion time

  • EN ISO 11554:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power@ energy and temporal characteristics

GOSTR, Inversion time

  • GOST R ISO 14624-6-2010 Space systems. Safety and compatibility of materials. Part 6. Determination of reactivity of processing material with aerospace fluids

Canadian General Standards Board (CGSB), Inversion time





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved