ZH
RU
ES

Mixer test process

Mixer test process, Total:349 items.

In the international standard classification, Mixer test process involves: Protection of and in buildings, Test conditions and procedures in general, Analytical chemistry, Road vehicle systems, Internal combustion engines for road vehicles, Construction materials, Soil quality. Pedology, Glass, Electricity. Magnetism. Electrical and magnetic measurements, Mechanical testing, Products of the textile industry, Refractories, Waxes, bituminous materials and other petroleum products, Rubber, Water quality, Fluid storage devices, Fuels, Fluid power systems, Environmental testing, Electrical and electronic testing, Mining and quarrying, Burners. Boilers, Refrigerating technology, Installations in buildings, Industrial automation systems, Inorganic chemicals, Laboratory medicine, Road engineering, Power transmission and distribution networks, Air quality, Non-destructive testing, Electromechanical components for electronic and telecommunications equipment, Fibre optic communications, Sterilization and disinfection, Measurement of time, velocity, acceleration, angular velocity, Plastics, Kitchen equipment, Powder metallurgy, Solar energy engineering, Petroleum, petroleum products and natural gas handling equipment, Components for aerospace construction, Nuclear energy engineering, Applications of information technology, Aerospace electric equipment and systems, Metrology and measurement in general, Manufacturing processes in the rubber and plastics industries, Medical equipment, Microbiology, Fruits. Vegetables, Wastes, Acoustics and acoustic measurements, Transformers. Reactors, Meat, meat products and other animal produce, Agricultural machines, implements and equipment, Structures of buildings, Electromagnetic compatibility (EMC).

European Committee for Standardization (CEN), Mixer test process

EN 12504-1:2000 Testing Concrete in Structures - Part 1: Cored Specimens - Taking, Examining and Testing in Compression
EN 12504-1:2009/AC:2020 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
EN 16479:2023 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automatic sampling devices (samplers) for water and waste water
prEN 60546-2-1992 Controllers with analogue signals for use in industrial-process control systems; part 2: guidance for inspection and routine testing (IEC 546-2:1987)
prEN 772-12-1992 Methods of test for masonry units; part 12: determination of length change during moisture movement in autoclaved aerated concrete masonry units
EN ISO 21329:2004 Petroleum and natural gas industries - Pipeline transportation systems - Testing procedures for mechanical connectors (ISO 21329:2004)
EN ISO 23861:2022 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
EN 2349-312:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load
EN ISO 11140-6:2022 Sterilization of health care products - Chemical indicators - Part 6: Type 2 indicators and process challenge devices for use in performance testing of small steam sterilizers (ISO 11140-6:2022)
EN 13894-1:2003 Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 1: During cure
EN 16479-1:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
EN 308:1997 Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices
EN 15695-2:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters@ requirements and test procedures (Incorporating corrigendum October 2011)
EN 15695-2:2017 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters@ requirements and test procedures
prEN ISO 23861:2021 Workplace air - Chemical agent present as a mixture of airborne particles and vapours - Requirements for evaluation of measuring procedures using samplers (ISO/DIS 23861:2021)

American Society for Testing and Materials (ASTM), Mixer test process

ASTM E795-05 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM D5451-93(2008) Standard Practice for Sampling Using a Trier Sampler
ASTM C1606-04(2009) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM C1606-10 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM D5451-21 Standard Practice for Sampling Using a Trier Sampler
ASTM D5451-93(2001) Standard Practice for Sampling Using a Trier Sampler
ASTM D5451-93(2012) Standard Practice for Sampling Using a Trier Sampler
ASTM D5451-93(2016) Standard Practice for Sampling Using a Trier Sampler
ASTM C512-02 Standard Test Method for Creep of Concrete in Compression
ASTM C865-91(1995) Standard Practice for Firing Refractory Concrete Specimens
ASTM C865-02 Standard Practice for Firing Refractory Concrete Specimens
ASTM C865-22 Standard Practice for Firing Refractory Concrete Specimens
ASTM C865-02(2007) Standard Practice for Firing Refractory Concrete Specimens
ASTM D5361-06 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361-00 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361-05 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361/D5361M-11 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361/D5361M-11a Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361/D5361M-16(2022) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D5361/D5361M-14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM C1140/C1140M-11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C192/C192M-18 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-06 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-00 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-13a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-15 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C1758/C1758M-15 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM D4188-82(1999) Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test
ASTM D4188-08 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test
ASTM D3496-99 Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
ASTM D7501-18 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D7501-18a Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D7501-12a Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D7501-12a(2017) Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D7501-09 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D7670-10 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM C192/C192M-02 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-07 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-12a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-12 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-13 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-14 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-16 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C192/C192M-16a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM D7501-21 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
ASTM D6234-98(2007) Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM D6234-98(2002) Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM D6234-98 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM D7501-22 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
ASTM C1228-96(2009) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM D5817-03 Standard Practice for Carbon Black, Pelleted-Reduction, Blending, and Drying of Gross Samples for Testing
ASTM D5817-20 Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
ASTM D5817-03a Standard Practice for Carbon Black, Pelleted8212;Reduction, Blending, and Drying of Gross Samples for Testing
ASTM C1228-96(2023) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM D4013-98(2005) Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
ASTM D4013-98 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
ASTM C156-11 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
ASTM C156-17 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
ASTM C1228-96(2004) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM D7650-10 Standard Test Method for Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM D5817-19 Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM E3281-21 Standard Guide for NAPL Mobility and Migration in Sediments – Screening Process to Categorize Samples for Laboratory NAPL Mobility Testing
ASTM E3281-21a Standard Guide for NAPL Mobility and Migration in Sediments – Screening Process to Categorize Samples for Laboratory NAPL Mobility Testing
ASTM D6327-10 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D4306-12 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D6327-10(2021) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D3556-85(1995) Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
ASTM D3556-85(2001) Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
ASTM D5581-96(2001) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D5581-07ae1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D5581-07a(2013) Standard test method for resistance of asphalt mixtures to plastic flow using a Marshall instrument (6-inch diameter specimen)
ASTM D6327-10(2016) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D4306-13 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-15 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D5581-07 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM F311-08(2013) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D4306-97 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-01 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-07 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-12a Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-12b Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-12c Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D3556-85(2009) Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
ASTM D6265-17 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D6265-15 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
ASTM D3862-80(2001) Standard Test Method for Retention Characteristics of 0.2-181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM D3862-13 Standard Test Method for Retention Characteristics of 0.2-181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM E1908-97 Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)
ASTM C1646/C1646M-08 Standard Practice for Making and Curing Test Specimens for Evaluating Frost Resistance of Coarse Aggregate in Air-Entrained Concrete by Rapid Freezing and Thawing
ASTM C1646/C1646M-16 Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
ASTM D7687-11 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
ASTM D3862-13(2019) Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM D3863-22 Standard Test Method for Retention Characteristics of 0.40 to 0.45 μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D3863-87(2003) Standard Test Method for Retention Characteristics of 0.40 to 0.45-181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM C1809-15 Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM D5895-01 Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D5895-20 Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D4856-23 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM F91-06 Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
ASTM F91-06(2011) Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
ASTM D4856-11 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

International Electrotechnical Commission (IEC), Mixer test process

IEC 61115:1992 Expression of performance of sample handling systems for process analyzers
IEC 60770-2:2003 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
IEC 60770-2:1989 Transmitters for use in industrial-process control systems; part 2: guidance for inspection and routine testing
IEC 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
IEC 62828-4:2020 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
IEC TS 63217:2021 Utility-interconnected photovoltaic inverters - Test procedure for over voltage ride-through measurements
IEC 61300-2-21:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
IEC 60546-2:1987 Controllers with analogue signals for use in industrial-process control systems. Part 2: Guidance for inspection and routine testing.
IEC 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
IEC 61280-2-1:1998 Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement
IEC 61300-2-24:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application
IEC 61300-2-54:2019 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas)
IEC 61280-2-1:2010 Fibre optic communication subsystem basic test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mixer test process

GB/T 19768-2005 Process Analyzer Sample Handling System Performance Representation
GB/T 19768-2005 Process Analyzer Sample Handling System Performance Representation
GB/T　19768-2005 Process Analyzer Sample Handling System Performance Representation
GB/T 42567.2-2023 Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for pressure transmitters
GB/T 42567.3-2023 Reference conditions and procedures for testing industrial and process measurement transmitters—Part 3: Specific procedures for temperature transmitters
GB/T 42567.1-2023 Reference conditions and procedures for testing transmitters for industrial process measurement Part 1: General procedures for all types of transmitters
GB/T 17614.2-1998 Transmitters for use in industrial-process control systems. Part 2: Guidance for inspection and routine testing
GB/T 17614.2-2015 Transmitters for use in industrial-process control systems.Part 2:Methods for inspection and roution testing
GB/T 17614.2-2008 Transmitters for use industrial-process control systems.Part 2:Methods for inspection and routine testing
GB/T 16886.1-2011 Biological evaluation of medical devices.Part 1: Evaluation and testing within a risk management process
GB/T 19973.2-2005 Sterilization of medical devices.Microbiological methods.Part 2: Tests of sterility performed in the validation of a sterilization process
GB/T 20819.2-2015 Controllers with analogue signals for use in industrial-process control system.Part 2:Guidance for inspection and routine testing
GB/T 20819.2-2007 Controllers with analogue signals for use industrial-process control system Part 2: Guidance for inspection and routine testing

German Institute for Standardization, Mixer test process

DIN EN 61115:1994 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993
DIN EN 12697-30:2019 Bituminous mixtures - Test methods - Part 30: Specimen preparation by impact compactor
DIN EN 12697-32:2019 Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
DIN EN 12697-31:2020-04 Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor; German version EN 12697-31:2019
DIN 51290-3:1991 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens
DIN 51290-4:1991 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts
DIN EN 1008:2002-10 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete; German version EN 1008:2002
DIN EN 12350-1:2017 Testing fresh concrete - Part 1: Sampling and common apparatus; German and English version prEN 12350-1:2017
DIN EN 13975:2003-11 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects; German version EN 13975:2003, German and English texts
DIN ISO 16000-38:2019 Indoor air - Part 38: Determination of amines in indoor and test chamber air - Active sampling on samplers containing phosphoric acid impregnated filters (ISO 16000-38:2019)
DIN 30911-6:1990 Sintered metal materials; sint-testing procedures; part 6: determination of filter properties
DIN EN ISO 21329:2005 Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004
DIN EN 2349-405:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance; German and English version EN 2349-405:2006
DIN EN 2349-402:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray; German and English version EN 2349-402:2006
DIN IEC/TS 62370:2004 Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures (IEC/TS 62370:2004)
DIN EN 2349-407:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat; German and English version EN 2349-407:2006
DIN EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water; German version EN 16479:2014
DIN EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods; German version EN 1076:2009
DIN EN 2349-312:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load; German and English version EN 2349-312:2006
DIN EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
DIN EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test (IEC 61300-2-21:2009); German version EN 61300-2-21:2010
DIN EN 16479-1:2012 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Part 1: Automated sampling devices (samplers) for water and waste water; German version prEN 16479-1:2012
DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
DIN EN 60546-2:2011 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing (IEC 60546-2:2010); German version EN 60546-2:2010
DIN EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects; German version EN 13975:2003, German and English texts
DIN EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods; German version EN 838:2010

The American Road & Transportation Builders Association, Mixer test process

AASHTO R 39-2007 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
AASHTO PP 104-2021 Standard Practice for Sample Preparation and Polishing of Asphalt Mixture Specimens for Dynamic Friction Testing
AASHTO T 312-2008 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor [Replaced: AASHTO TP4, AASHTO TP4, AASHTO TP4, AASHTO TP4]

Professional Standard - Machinery, Mixer test process

JB/T 6854-1993 Performance representation of sample handling systems for process analytical instruments

Society of Automotive Engineers (SAE), Mixer test process

SAE J2709-2012 Coolant Filter Test Procedure
SAE J2709-2019 Coolant Filter Test Procedure
SAE J2312-2013 Automatic Transmission Intake Filter Test Procedure

SAE - SAE International, Mixer test process

SAE J2709-2007 Coolant Filter Test Procedure
SAE J2312-2005 Automatic Transmission Intake Filter Test Procedure

Indonesia Standards, Mixer test process

SNI 2493-2011 Tata cara pembuatan dan perawatan benda uji beton di laboratorium

Association Francaise de Normalisation, Mixer test process

NF P98-818-56*NF EN 12697-56:2019 Bituminous mixtures - Test methods - Part 56 : specimen preparation by static compaction
NF EN 12390-6:2012 Essais pour béton durci - Partie 6 : détermination de la résistance en traction par fendage d'éprouvettes
NF P18-211*NF EN 1008:2003 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
NF E38-328*NF EN 1117:1998 Heat exchangers - liquid cooled refrigerant condensers - Test procedures for establishing the performance.
NF EN 12390-15:2019 Essais pour béton durci - Partie 15 : méthode adiabatique de détermination de la chaleur dégagée par le béton en cours de durcissement
NF EN 13286-48:2005 Mélanges traitées et mélanges non traités aux liants hydrauliques - Partie 48 : méthode d'essai pour la détermination du degré de pulvérisation
NF EN 12390-14:2018 Essai pour béton durci - Partie 14 : méthode semi-adiabatique de détermination de la chaleur dégagée par le béton au cours de son processus de durcissement
NF C93-471-7:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 7 : TEST 11G : FLOWING MIXED GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-7).
NF C93-902-21*NF EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21 : tests - Composite temperature/humidity cyclic test
NF EN 13975:2003 Procédures d'échantillonnage utilisées pour l'acceptation des essais des dispositifs médicaux de diagnostic in vitro - Aspects statistiques
NF S98-004-1:1997 Biological systems for testing sterilizers and sterilization processes. Part 1 : general requirements.
NF C93-807-2-1:1999 Fibre optic communication subsystem basic test procedures - Part 2-1 : test procedures for digital systems - Receiver sensitivity and overload measurement.
NF C93-902-47:2005 Fibre optic inerconnecting devices and passive components - Basic test and measurement procedures - Part 2-47 : tests - Thermal shocks.
NF UTE C46-302:1983 Mesure et commande dans les processus industriels - Essais et procédures de réception des transmetteurs des pressions absolue, effective et de pression différentielle
NF S98-004-3:1997 Biological systems for testing sterilizers and sterilization processes. Part 3 : particular systems for use in moist heat sterilizers.
NF C46-402*NF EN 60546-2:2011 Controllers with analogue signals for use in industrial-process control systems - Part 2 : guidance for inspection and routine testing
NF C46-402:1993 Controllers with analogue signals for use in industrial-process control systems. Part 2 : guidance for inspection and routine testing.
NF T90-553*NF EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
NF S98-004-2:1997 Biological systems for testing sterilizers and sterilization processes. Part 2 : particular systems for use in ethylene oxide sterilizers.
NF S99-501-1*NF EN ISO 10993-1:2020 Biological evaluation of medical devices - Part 1 : evaluation and testing within a risk management process
UTE C46-302U*UTE C46-302:1983 Industrial-process measurement and control. Acceptance tests for absolute pressure, relative pressure, and differential pressure transmitters.
NF X43-278*NF EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
NF L58-100-306*NF EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306 : overload d.c. and a.c.
NF S98-051-6*NF EN 868-6:2017 Packaging for terminally sterilized medical devices - Part 6 : paper for low temperature sterilization processes - Requirements and test methods
NF L58-100-312*NF EN 2349-312:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 312 : Electrical service life - Mixed load.
NF S98-051-7*NF EN 868-7:2017 Packaging for terminally sterilized medical devices - Part 7 : adhesive coated paper for low temperature sterilization processes - Requirements and test methods
NF P98-230-2:1993 Test relating to pavements. Preparation of materials bound with cementitious binders or aggregates mixtes. Part 2 : preparation by static compression of sands or fine grained soils specimens.
NF S98-118-2:2010 Sterilization of medical devices - Microbiological methods - Part 2 : tests of sterility performed in the definition, validation and maintenance of a sterilization process.

CEN - European Committee for Standardization, Mixer test process

PREN 12697-56-2018 Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction

British Standards Institution (BSI), Mixer test process

BS EN 12504-1:2019 Testing concrete in structures - Cored specimens. Taking, examining and testing in compression
BS EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BS ISO 22031:2021 Sampling and test method for cleanable filter media taken from filters of systems in operation
BS EN 60770-2:2011 Transmitters for use in industrial-process control systems. Methods for inspection and routine testing
BS EN 60770-2:2003 Transmitters for use in industrial-process control systems - Methods for inspection and routine testing
BS EN 60770-2:2010 Transmitters for use in industrial-process control systems. Methods for inspection and routine testing
BS ISO 16000-38:2019 Indoor air - Determination of amines in indoor and test chamber air. Active sampling on samplers containing phosphoric acid impregnated filters
BS EN 60546-2:2011 Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing
BS EN 60546-2:1989 Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing
BS EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing
BS EN 1937:1999 Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures
BS EN 866-2:1998 Biological systems for testing sterilizers and sterilization processes - Particular systems for use in ethylene oxide sterilizers
BS EN 61300-2-24:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of ceramic alignment split sleeve by stress application
BS EN 16479:2014 Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water
BS EN 61280-2-1:2010 Fibre optic communication subsystem test procedures - Digital systems - Receiver sensitivity and overload measurement
BS EN 2349-312:2007 Aerospace series - Requirements and test procedures for relays and contactors - Electrical service life - Mixed load
BS EN 2349-312:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life — Mixed load
BS EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
BS EN 15695-2:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Filters, requirements and test procedures
BS EN ISO 11737-2:2010 Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the definition, validation and maintenance of a sterilization process
BS EN ISO 11737-2:2020 Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the definition, validation and maintenance of a sterilization process
BS EN ISO 11737-2:2009 Sterilization of medical devices - Microbiological methods - Tests of sterility performed in the definition, validation and maintenance of a sterilization process

Danish Standards Foundation, Mixer test process

DS/EN 141:1992 Respiratory protective devices.Gas filters and combined filters. Requirements,testing,marking
DS/EN 61115:1994 Expression of performance of sample handling systems for process analyzers
DS/EN 372:1992 Respiratory protective devices. SX gas filters and combined filters against specific named compounds. Requirements, testing, marking
DS/EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in concrete industry, as mixing water for concrete
DS/EN 371:1992 Respiratory protective devices. AX gas filters and combined filters against low boiling organic compounds. Requirements, testing, marking
DS/EN 2349-312:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load
DS/EN 868-6:2009 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
DS/EN 868-7:2009 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
DS/EN ISO 11737-2:2010 Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process

ES-UNE, Mixer test process

UNE-EN 12697-31:2020 Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor

PH-BPS, Mixer test process

PNS ASTM C1140/C1140M:2021 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

Japanese Industrial Standards Committee (JISC), Mixer test process

JIS Z 8910:2007 Test method of filter media for dust collection -- Sampling and test method for fabric filter durability
JIS Z 2342:1991 Methods for acoustic emission testing of pressure vessels during pressure test
JIS C 60068-2-50:1997 Basic environmental testing procedures Part 2: Tests Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
JIS C 60068-2-51:1997 Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
JIS B 3502:2021 Industrial-process measurement and control -- Programmable controllers -- Equipment requirements and tests
JIS Z 2342:2003 Methods for acoustic emission testing of pressure vessels during pressure tests and classification of test results
JIS C 61300-2-45:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-45: Tests -- Durability test by water immersion
JIS C 61300-2-47:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-47: Tests -- Thermal shocks
JIS C 61300-2-19:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-19: Tests -- Damp heat (steady state)
JIS C 61300-2-21:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-21: Tests -- Composite temperature/humidity cyclic test
JIS C 61300-2-17:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-17: Tests -- Cold
JIS C 61280-2-1:2010 Fiber optic communication subsystem test procedures -- Receiver sensitivity and overload measurement
JIS C 61300-2-18:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-18: Tests -- High temperature
JIS T 0993-1:2012 Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process
JIS C 61300-1:2015 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 1: General and guidance
JIS C 61300-1:2019 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 1: General and guidance
JIS C 61300-1:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 1: General and guidance
JIS C 61280-2-1:2018 Fiber optic communication subsystem test procedures -- Part 2-1: Receiver sensitivity and overload measurement
JIS C 61300-3-28:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-28: Examinations and measurements -- Transient loss
JIS C 61300-3-20:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-20: Examinations and measurements -- Directivity of fiber optic branching devices

European Committee for Electrotechnical Standardization（CENELEC）, Mixer test process

EN 61115:1993 Expression of Performance of Sample Handling Systems for Process Analyzers
EN 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
HD 530.2 S1-1989 Controllers with Analogue Signals for Use in Industrial - Process Control Systems Part 2: Guidance for Inspection and Routine Testing
EN 61280-2-1:2010 Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement
EN 60512-12-6:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 12: Soldering Tests Section 6: Test 12f: Sealing Against Flux and Cleaning Solvents in Machine Soldering

机械电子工业部, Mixer test process

JB 5852-1991 Test procedures and test methods for over-frequency relays and devices
JB 5855-1991 Test procedures and test methods for overcurrent relays with inverse time characteristics

Standard Association of Australia （SAA）, Mixer test process

AS 1683.19:2001 Methods of test for rubber - Preparation, mixing and vulcanization of rubber test mixes - Equipment and procedures
AS 2350.7:2006 Methods of testing portland, blended and masonry cements - Determination of temperature rise during hydration of portland and blended cements

ZA-SANS, Mixer test process

SANS 51008:2006 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
SANS 61280-2-1:1998 Fibre optic communication subsystem basic test procedures Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement

Korean Agency for Technology and Standards (KATS), Mixer test process

KS F 2486-2020 Standard practice for preparation of asphalt mixture specimens for dynamic modulus testing
KS C 1008-1987(1997) METHOD OF EVALUATING THE PERFORMANCE OF CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL PROCESS CONTROL
KS C 1008-1987 METHOD OF EVALUATING THE PERFORMANCE OF CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL PROCESS CONTROL
KS C 4003-2004 Methods of evaluating the performance of pressure and differentialpressure transmitters for use in industrial-process control systems
KS C IEC 60770-2:2003 Transmitters for use in industrial-process control systems-Part 2:Guidance for inspection and routine testing
KS C IEC 60770-2:2013 Transmitters for use in industrial-process control systems－Part 2：Guidance for inspection and routine testing
KS C IEC 60770-2-2003(2008) Transmitters for use in industrial-process control systems－Part 2：Guidance for inspection and routine testing
KS C IEC 61131-2:2022 Industrial-process measurement and control — Programmable controllers — Part 2: Equipment requirements and tests
KS C IEC 61153-2003(2008) Electrical and pneumatic analogue chart recorders for use in industrial-process control systems－Guidance for inspection and routine testing
KS C IEC 61300-2-24:2022 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 2-24: Tests — Screen testing of ceramic alignment split sleeve by stress application
KS C IEC 60546-2-2003(2008) Controllers with analogue signal for use in industrial-process control system－Part 2：Guidance for inspection and routine testing
KS P ISO 11737-2:2012 Sterilization of medical devices－Microbiological methods－Part 2：Tests of sterility performed in the validation of a sterilization process

PT-IPQ, Mixer test process

International Organization for Standardization (ISO), Mixer test process

ISO 22031:2021 Sampling and test method for cleanable filter media taken from filters of systems in operation
ISO 16000-38:2019 Indoor air — Part 38: Determination of amines in indoor and test chamber air — Active sampling on samplers containing phosphoric acid impregnated filters
ISO 21329:2004 Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
ISO 23861:2022 Workplace air — Chemical agent present as a mixture of airborne particles and vapour — Requirements for evaluation of measuring procedures using samplers
ISO 10993-1:2009 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
ISO 10993-1:2018 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
ISO 8820-1:1994 Road vehicles - Blade-type electric fuse-links - Part 1: Rated current, identification, test procedures and performance requirements
ISO 11737-2:1998 Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process
ISO 11140-6:2022 Sterilization of health care products — Chemical indicators — Part 6: Type 2 indicators and process challenge devices for use in performance testing of small steam sterilizers
ISO 10993-1:2009/cor 1:2010 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process; Technical Corrigendum 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Mixer test process

GB/T 36011-2018 Sampling check and routine test method for programmable controller
GB/T 19973.2-2018 Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition，validation and maintenance of a sterilization process

Professional Standard - Military and Civilian Products, Mixer test process

WJ 2248-1994 Verification Regulations for Protective Performance Test Device of Filter Absorber

Lithuanian Standards Office , Mixer test process

LST EN 1008-2003 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
LST EN 2349-312-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load
LST EN 868-6-2009 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
LST EN 868-7-2009 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods

AENOR, Mixer test process

UNE-EN 1008:2007 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
UNE-EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
UNE-EN 868-6:2017 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
UNE-EN 868-7:2017 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods

RU-GOST R, Mixer test process

GOST EN 13975-2016 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects
GOST R ISO 16000-38-2021 Indoor air. Part 38. Determination of amines in indoor and test chamber air. Active sampling on samplers containing phosphoric acid impregnated filters
GOST 25804.5-1983 Atomic power station technological processes control system equipment. General rules of conducting test specimens and serial items test and acceptance
GOST 29254-1991 Electromagnetic compatibility for technical means. Industrial process measurement and control equipment. Immunity tests requirements and methods

Group Standards of the People's Republic of China, Mixer test process

T/CAPE 10102-2022 Concrete mixture performance test equipment management regulations
T/CAPE 10103-2022 Regulations for the management of concrete physical and mechanical properties test instruments and equipment
T/CAPE 10104-2022 Regulations for the management of concrete long-term performance and durability testing instruments and equipment

UY-UNIT, Mixer test process

PL-PKN, Mixer test process

PN E04622-1989 Electrical and electronic products Environmental testing procedures Test XA and guidance Immersion in cleaning solvents
PN E04618-03-1989 Electrical and electronic products Environmental testing procedures Test Ta: Soldering Solderability testing by the wetting balance method [Translation Publication of IEC 68-2-54 (1985)]
PN E04614-01-1989 Electrical 'and electronic products Environmental testing procedures Fire .hazard testing General quidance [Translation of IEC Publication 695-1-1 (1982)]

国家食品药品监督管理局, Mixer test process

YY/T 1623-2018 Test method for effectiveness of sterilization processes for reusable medical devices

CENELEC - European Committee for Electrotechnical Standardization, Mixer test process

EN 60770-2:2003 Transmitters for use in industrial-processcontrol systems Part 2: Methods for inspection and routine testing
EN 60512-23-3:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
EN 61280-2-1:1999 Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-1: Test Procedures for Digital Systems - Receiver Sensitivity and Overload Measurement

KR-KS, Mixer test process

KS C IEC 61131-2-2022 Industrial-process measurement and control — Programmable controllers — Part 2: Equipment requirements and tests
KS C IEC 61300-2-24-2022 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 2-24: Tests — Screen testing of ceramic alignment split sleeve by stress application

Professional Standard - Medicine, Mixer test process

YY/T 1432-2016 Test method for determination of heatsealability of flexible webs of medical devices as measured by seal strength

VN-TCVN, Mixer test process

TCVN 7538-6-2010 Soil quality.Sampling.Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory
TCVN 7572-12-2006 Aggregates for concrete and mortar.Test methods.Part 12: Determination of resistance to degradation of coasre aggregate by abration and impact in the Los Angeles machine

American National Standards Institute （ANSI), Mixer test process

ANSI/ASTM D6265:1998 Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
ANSI/AAMI/ISO 11737-2:2009 Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process

国家市场监督管理总局、中国国家标准化管理委员会, Mixer test process

GB/T 16886.1-2022 Biological evaluation of medical devices—Part 1: Evaluation and testing within a risk management process

US-FCR, Mixer test process

FCR COE CRD-C 656-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINING THE CALIFORNIA BEARING RATIO AND FOR SAMPLING PAVEMENT BY THE SMALL-APERTURE PROCEDURE

European Association of Aerospace Industries, Mixer test process

AECMA PREN 2349-306-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 306: Overload D.C. and A.C. Edition P 1
AECMA PREN 2349-312-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 312: Electrical Service Life - Mixed Load Edition P 1

Institute of Electrical and Electronics Engineers (IEEE), Mixer test process

IEEE Std C57.119-2001 Practice for performing temperature rise tests on oil-immersed power transformers at loads beyond nameplate ratings
IEEE Std C57.119-2001(R2008) IEEE Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings

CO-ICONTEC, Mixer test process

ICONTEC 118-1991