Insulation Aging Electrical Aging

Insulation Aging Electrical Aging, Total:429 items.

In the international standard classification, Insulation Aging Electrical Aging involves: Industrial furnaces, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Insulating fluids, Transformers. Reactors, Construction materials, Insulation, Electrical accessories, Rotating machinery, Electrical wires and cables, Radiation measurements, Vocabularies, Glass, Test conditions and procedures in general, Reinforced plastics, Elements of buildings, Protection of and in buildings, Nuclear energy engineering, Aerospace electric equipment and systems, Rubber, Solar energy engineering, Petroleum, petroleum products and natural gas handling equipment, Domestic electrical appliances in general, Galvanic cells and batteries, Power transmission and distribution networks, Fruits. Vegetables, Piezoelectric and dielectric devices.

German Institute for Standardization, Insulation Aging Electrical Aging

DIN EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens; Multi-chamber ovens (IEC 60216-4-3:2000); German version EN 60216-4-3:2000
DIN EN 61065:1994 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991); German version EN 61065:1993
DIN EN 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004 + A1:2007); German version EN 60450:2004 + A1:2007
DIN EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006); German version EN 60216-4-1:2006
DIN EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C (IEC 60216-4-2:2000); German version EN 60216-4-2:2000
DIN EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2011); German version EN 60544-5:2012
DIN EN 60216-1:2014 Electrical insulating materials.Thermal endurance properties.Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013); German version EN 60216-1:2013
DIN EN IEC 62884-3:2018-10 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods (IEC 62884-3:2018); German version EN IEC 62884-3:2018

Society of Automotive Engineers (SAE), Insulation Aging Electrical Aging

SAE AIR7374-2024 Aging Mechanisms of Electrical Insulation Materials in a High Energy System

PT-IPQ, Insulation Aging Electrical Aging

NP 3248-1-1987 Circuit insulation materials. Liquid insulators, measurement method of thermal aging resistance. Part 1: Method of measurement of resistance to thermal aging
NP 3248-4-1987 Circuit insulation materials. Liquid insulators, measurement method of thermal aging resistance. Part 4: Calculation method of thermal aging resistance
NP 3248-3-1987 Circuit insulation materials. Liquid insulators, measurement method of thermal aging resistance. Part 3: Statistical Methods
NP 3248-2-1987 Circuit insulation materials. Liquid insulators, measurement method of thermal aging resistance. Part 2: Materials and Test Checklist

IN-BIS, Insulation Aging Electrical Aging

IS 12177-1987 Method for testing the oxidative aging of electrical insulating petroleum using the open beaker method
IS 11182 Pt.1-1984 Guidelines for Evaluating Insulation Systems for Electrical Equipment Part 1 Identification, Assessment and Aging Mechanisms

European Committee for Electrotechnical Standardization（CENELEC）, Insulation Aging Electrical Aging

EN 60216-4-3:2000 Electrical Insulating Materials - Thermal Endurance Properties Part 4-3: Ageing Ovens - Multi-Chamber Ovens
EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens
EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
EN 61065:1993 Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing
EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (Incorporates Amendment A1: 2007)
EN 60216-4-2:2000 Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius
HD 611.1 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines for Ageing Procedures and Evaluation of Test Results
HD 505.1.2 S1-1988 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods
EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems
HD 505.1.2 S2-1991 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods
EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines

Taiwan Provincial Standard of the People's Republic of China, Insulation Aging Electrical Aging

CNS 14952-4-1-2005 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 4: Ageing ovens - section 1: single-chamber ovens
CNS 14954-2005 Principle aspects of functional evaluation of electrical insulation systems - Ageing mechanisms and diagnostic procedures
CNS 14952-1-2005 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 1: General guidelines for ageing procedure and evaluation of test results

American Society for Testing and Materials (ASTM), Insulation Aging Electrical Aging

ASTM D1934-95(2005) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D1934-20 Standard Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method
ASTM C1488-01 Standard Practice for Simulated Aging of Loose-Fill Insulation
ASTM D1934-95(2000) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D1934-95(2012) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D3251-99 Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM C1488-04 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
ASTM C1488-04e1 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
ASTM D1698-97 Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM D16-08 Standard Terminology for Paint, Related Coatings, Materials, and Applications
ASTM E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E2141-14 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D4243-99(2009) Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM D1698-03(2008) Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM D1698-03 Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM E2953-14(2020)e1 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E2953-14 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D4243-99(2004)e1 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM D4243-99 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM E773-97 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
ASTM E773-88 Standard Test Methods for Seal Durability of Sealed Insulating Glass Units
ASTM E773-01 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
ASTM E1596-99 Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules
ASTM D619-99 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D619-99(2004) Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D5638-18 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
ASTM D619-14 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D5638-14 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
ASTM D5638-00 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
ASTM D5638-05(2010) Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
ASTM D619-21 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D4243-23 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

British Standards Institution (BSI), Insulation Aging Electrical Aging

BS 7836:1996 Measurement of the average viscometric degree of polymerization of new and aged electric papers
BS EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Ageing ovens - Single-chamber ovens
BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
BS EN IEC 60544-5:2022 Electrical insulating materials. Determination of the effects of ionizing radiation - Procedures for assessment of ageing in service
BS EN 60216-4-3:2000 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Multi-chamber ovens
BS EN 60450:2004(2007) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
BS EN 60544-5:2003 Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
BS EN 60544-5:2012 Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results
BS 5691-4.1:1995 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing ovens - Single chamber ovens
20/30398376 DC BS EN IEC 60544-5. Electrical insulating materials. Determination of the effects of ionizing radiation. Part 5. Procedures for assessment of ageing in service
24/30448611 DC BS EN IEC 60216-1 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS EN 60811-1-2:1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods
BS EN 60811-401:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 60811-1-2:1995(2002) Common test methods for insulating and sheathing materials of electric and optical cables — Part 1 - 2 : General application — Thermal ageing methods
BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
BS EN IEC 60034-27-4:2018 Rotating electrical machines. Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
BS ISO 18543:2021 Glass in building. Electrochromic glazings. Accelerated ageing test and requirements
BS EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators. Frequency aging test methods
BS ISO 2951:2019 Rubber, vulcanized rubber. Determination of insulation resistance
BS IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
BS 7816-3:1998 Determination of long-term radiation ageing in polymers. Procedures for in-service monitoring of low-voltage cable materials
20/30379070 DC BS ISO 18543. Glass in building. Electrochromic glazings. Accelerated ageing test and requirements

Professional Standard - Electricity, Insulation Aging Electrical Aging

DL/T 984-2005 Guide for the diagnosis of insulation aging in oil-immersed power transformer
DL/T 984-2018 Guidelines for judging insulation aging of oil-immersed transformers
DL/T 492-2009 Guide for aging appraise of generator stator winding insulation with epoxy mica
DL/T 492-1992 Guiding principle for appraising aging of epoxy mica insulation for generator stator

Korean Agency for Technology and Standards (KATS), Insulation Aging Electrical Aging

KS C IEC 60450-2008(2018) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60216-4-3:2002 Electrical insulating materials－Thermal endurance properties－Part 4－3：Ageing ovens－Multi－chamber ovens
KS C IEC 60216-4-3-2023 Electrical insulating materials — Thermal endurance properties — Part 4-3: Ageing ovens — Multi-chamber ovens
KS C IEC 61065-2014(2019) Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
KS C IEC 61065-2019 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
KS C IEC 60450-2023 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60216-4-3:2018 Electrical insulating materials — Thermal endurance properties — Part 4-3: Ageing ovens — Multi-chamber ovens
KS C IEC 60216-4-2-2022 Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-1:2008 Electrical insulating materials－Properties of thermal endurance－Part 1：Ageing procedures and evaluation of test results
KS C IEC 60216-1:2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results
KS C IEC 60216-4-2-2002(2017) Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-4-2:2002 Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-4-1:2008 Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 60216-4-2-2002(2022) Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-4-1-2008(2018) Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 60216-4-1-2023 Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 60811-1-2:2002 Common test methods for insulating and sheathing materials of electric cables－Part 1：Methods for general application－Section 2：Thermal ageing methods
KS C IEC 60811-412-2021 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-1-2:2020 Common test methods for insulating and sheathing materials of electric cables — Part 1: Methods for general application —Section 2: Thermal ageing methods
KS M ISO 11561:2009 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 11561-2019 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 2951:2009 Vulcanized rubber-Determination of insulation resistance
KS M ISO 2951:2014 Rubber, vulcanized or thermoplastic — Determination of insulation resistance
KS C IEC 62342-2012(2017) Nuclear power plants－Instrumentation and control systems important to safety－Management of ageing
KS C IEC 62342-2012(2022) Nuclear power plants－Instrumentation and control systems important to safety－Management of ageing
KS C IEC 62465-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Management of ageing of electrical cabling systems
KS C IEC 62465-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Management of ageing of electrical cabling systems
KS C IEC 61858-1:2017 Electrical insulation systems — Thermal evaluation of modifications to an established electrical insulation(EIS)— Part 1:Wire-wound winding EIS
KS M ISO 2951-2014(2019) Rubber, vulcanized or thermoplastic — Determination of insulation resistance

American National Standards Institute （ANSI), Insulation Aging Electrical Aging

ANSI/ASTM D3251:2004 Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02)
ANSI/IEEE 1205Corrigendum 1:2006 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
ANSI/IEEE 1205:2000 Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Sations
ANSI/ASTM D5638:2005 Test Method for Chemical Resistance of Electrical Insulating Varnishes (10.02)
ANSI/ASTM D619:2021 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation

Institute of Electrical and Electronics Engineers (IEEE), Insulation Aging Electrical Aging

IEEE 943-1986 Guide for aging mechanisms and diagnostic procedures in evaluating electrical insulation systems
ANSI/IEEE Std 943-1986 IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems
IEEE 775-1993 Guide for designing multistress aging tests of electrical insulation in a radiation environment
IEEE Std 775-1993 IEEE Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment
IEEE 1205/COR 1-2006 Assessing, monitoring, and mitigating aging effects on class 1E equipment used in nuclear power generating stations - Corrigendum 1: Thermal aging model; Corrections
IEEE 1205-2000 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations
IEEE Std 1407-1998 IEEE Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks
IEEE 1407-2007 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV?5 kV) Extruded Electric Power Cables Using Water-Filled Tanks

International Electrotechnical Commission (IEC), Insulation Aging Electrical Aging

IEC 60450:2004/AMD1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials; Amendment 1
IEC 61065:1991/COR1:1993 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
IEC 61065:1991 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
IEC 60450:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60610:1978 Principal aspects of functional evaluation of electrical insulation systems; Ageing mechanisms and diagnostic procedures
IEC 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
IEC 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
IEC 60216-1:2001 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
IEC 60544-5:2022 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60544-5:2022 RLV Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 60544-5:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60544-5:2011 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60216-4-2:2000 Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C
IEC 60216-4-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens
IEC 60216-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 1: general guidelines for ageing procedures and evaluation of test results
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
IEC 60811-401:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-1-2:1985/AMD1:1989 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985
IEC 60450:1974 Measurement of the average viscometric degree of polymerization of new and aged electrical papers
IEC 60811-1-2/COR1:1986 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1
IEC 60811-1-2:1985/AMD2:2000 Common tests methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application; Thermal ageing methods; Amendment 2
IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods

YU-JUS, Insulation Aging Electrical Aging

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

Association Francaise de Normalisation, Insulation Aging Electrical Aging

NF C26-270/A1*NF EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF C26-304:1990 Determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Section 1 : single-chamber ovens.
NF EN 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: aging ovens - multiple chamber ovens
NF C27-110*NF EN 61065:1993 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing.
NF EN 61065:1993 Méthode d'évaluation des propriétés d'écoulement à basse température des huiles minérales isolantes , après vieillissement
NF C26-270*NF EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF C26-304-1*NF EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1 : ageing ovens - Single-chamber ovens
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF C26-304-3*NF EN 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3 : ageing ovens - Multi-chamber ovens
NF EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: aging ovens - Single-chamber ovens
NF EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic insulating materials for electrical use
NF EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic insulating materials for electrical use
NF C26-290-5:2003 Electrical insulation materials - Determinination of the effects of ionising - radiation - Part 5 : procedures for assessment of ageing in service.
NF EN IEC 60544-5:2022 Matériaux isolants électriques - Détermination des effets des rayonnements ionisants - Partie 5 : Procédures pour l'évaluation du vieillissement en service
NF C26-301:2002 Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.
NF EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: aging methods and evaluation of test results
NF C26-301*NF EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: ageing procedures and evaluation of test results
NF C26-301:1990 Determination of thermal endurance properties of electrical insulating materials. General guidelines for ageing procedures and evaluation of test results.
NF C26-304-2*NF EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC
NF C26-290-5*NF EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: procedures for assessment of ageing in service
NF EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: aging ovens - Precision ovens for use up to 300 oC
NF C32-025/A2:2001 Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.
NF C32-025:1996 Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.
NF P75-460-1*NF ISO 18393-1:2012 Thermal insulating products - Determination of ageing by settlement - Part 1 : blown loose-fill insulation for ventilated attics
NF C33-004:1998 Insulated cables and their accessories for power systems. Connecting equipment for overhead distributions and services of rated voltage 0,6/1 kV with at least one insulated core. Electrical ageing test.
NF EN 60811-412:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal aging method - Aging in an air bomb
NF EN 60811-401/A1:2017 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal aging methods - Air oven aging
NF EN 60811-401:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal aging methods - Air oven aging
NF C32-011-401/A1*NF EN 60811-401/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401 : miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF L54-002-099*NF EN 2591-218:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 218 : ageing of terminal lugs and in-line splices by temperature and current cycling.
NF C19-465*NF EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems
NF C32-032:1993 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. PART 4 : METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUDS. SECTION TWO. ELONGATION AT BREAK AFTER PRE-CONDITIONING. WRAPPING TEST AFTER THERMAL AGEING IN AIR. MEASUR
NF C26-270:1975 Mesurement of the average viscosimetric degree of polymerization ofnew and aged electrical papers.
NF EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important for safety - Management of aging of electrical cable systems
NF C33-045-5*NF EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5 : electrical ageing test.
NF C51-127-4*NF EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4 : measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
NF C93-684-3*NF EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3 : frequency aging test methods
NF EN IEC 62884-3:2018 Measuring techniques for piezoelectric, dielectric and electrostatic oscillators Part 3: Frequency aging test methods
UTE C32-063-1U*UTE C32-063-1:2009 Chemical behaviour of sheathing and insulation materials of communication cables
UTE C32-063-1:2009 Chemical behavior of sheath and insulation materials for communications cables
NF EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: measurement of insulation resistance and polarization index on the winding insulation system of rotating electrical machines

RU-GOST R, Insulation Aging Electrical Aging

GOST 27905.2-1988 Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST R IEC 811-1-2-1994 Common test methods for insulating and sheathing materials of electric cables. Termal ageing methods
GOST IEC 60811-1-2-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST R IEC 60811-1-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST R 9.603-2021 Unified system of corrosion and ageing protection. Electrochemical protection. Electrical isolating joints. General specifications
GOST 21215-1975 Electrical insulating oxide paper. Specifications
GOST R IEC 62342-2016 Nuclear power plants. Instrumentation and control systems important to safety. Management of ageing

Danish Standards Foundation, Insulation Aging Electrical Aging

DS/EN 61065:1994 Method for evaluating the low temperature flow properties of mineral insulation oils after ageing
DS/EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
DS/EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DS/EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
DS/EN 60216-1:2002 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
DS/EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
DS/IEC 216-4:1982 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 4: Instruction for calculating the thermal endurance profile
DS/EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
DS/IEC 216-1:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 1: General guidelines for ageing procedures and evaluation of test results
DS/EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
DS/EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
DS/ISO 2951:1982 Vulcanized rubber. Determination of insulation resistance
DS/HD 488 S1:1999 Gassing of insulating liquids under electrical stress and ionization

SE-SIS, Insulation Aging Electrical Aging

SIS SS IEC 450:1983 Measurement ofthe average viscometric degree of polymerization of new and aged electrical papers
SIS SS IEC 628:1986 Insulating oils - Gassing of insulating liquids under electrical stress and ionization

Professional Standard - Energy, Insulation Aging Electrical Aging

NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines
NB/T 42005-2013 Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines

SCC, Insulation Aging Electrical Aging

DANSK DS/EN 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
CEI EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
DANSK DS/EN 61065:1994 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
CEI EN 61065:1997 Methods for evaluating the low temperature flow properties of mineral insulating oils after ageing
CEI EN 60450:2005 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
CEI EN 60450/A1:2005 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
DANSK DS/EN 60450/A1:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DANSK DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
CEI EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
DANSK DS/EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
BS 6469-1-1.2:1992 Insulating and sheathing materials of electric cables. Methods of test for general application-Thermal ageing methods
IEC TS 60610:1978 Principal aspects of functional evaluation of electrical insulation systems: Ageing mechanisms and diagnostic procedures
CEI EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation Part 5: Procedures for assessment of ageing in service
DANSK DS/EN 60544-5:2012 Electrical insulating materials – Determination of the effects of ionizing radiation – Part 5: Procedures for assessment of ageing in service
CEI EN 60216-1:2014 Electrical insulating materials - Thermal endurance properties Part 1: Ageing procedures and evaluation of test results
DANSK DS/EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
AENOR UNE-EN 60216-1:2002 Electrical insulating materials. Thermal endurance properties. Part 1: Aging methods and evaluation of test results.
DANSK DS/EN IEC 60544-5:2022 Electrical insulating materials – Determination of the effects of ionizing radiation – Part 5: Procedures for assessment of aging in service
CEI EN IEC 60544-5:2023 Electrical insulating materials - Determination of the effects of ionizing radiation Part 5: Procedures for assessment of ageing in service
UNE-EN 60216-1:2002 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results.
12/30263544 DC BS EN 60216-1. Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
CEI EN 60811-1-2:2001 Insulating and sheathing materials of electric and optical cables - Part 1: General application - Section 2: Thermal ageing methods
BS 5691-1:1995 Guide for the determination of thermal endurance properties of electrical insulating materials-General guidelines for ageing procedures and evaluation of test results
11/30244657 DC BS EN 60544-5. Electrical insulating materials. Determination of the effects of ionising radiation. Part 5. Procedures for assessment of ageing in service
DIN EN IEC 60544-5:2023 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2022); German version EN IEC 60544-5:2022
CEI EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
DANSK DS/EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
AENOR UNE 211605:2013 Climatic aging test of cable coating materials.
UNE-EN 60811-1-2:1996 INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. COMMON ETST METHODS. PART 1: GENERAL APPLICATION. SECTION 2: THERMAL AGEING METHODS.
DIN EN 60544-5 E:2011 Draft Document - Electrical insulating materials - Determination of the effects of ionising radiation - Part 5: Procedures for assessment of ageing in service (IEC 112/171/CDV:2011); German version FprEN 60544-5:2011
DIN EN IEC 60544-5 E:2021 Draft Document – Electrical insulating materials – Determination of the effects of ionizing radiation – Part 5: Procedures for assessment of ageing in service (IEC 112/523/CDV:2021); German and English version prEN IEC 60544-5:2021
IEC 60216-1:1987 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 1: General guidelines for ageing procedures and evaluation of test results
DIN EN 60216-1 E:2012 Draft Document - Electrical insulating materials - Thermal Endurance Properties - Part 1: Ageing procedures and evaluation of test results (IEC 112/207/CDV:2012); German version FprEN 60216-1:2012
CEI EN 60811-412:2014 Electric and optical fibre cables - Test methods for non-metallic materials Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
DANSK DS/EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
CEI EN 60811-401:2014 Electric and optical fibre cables - Test methods for non-metallic materials Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
AENOR UNE-EN 60811-401/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
CEI EN 60811-401/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
DANSK DS/EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
DANSK DS/EN 60811-401/A1:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
AENOR UNE-EN 60811-401:2012 Electrical and fiber optic cables. Test methods for non-metallic materials. Part 401: Miscellaneous tests. Thermal aging methods. Aging in an air oven.
DIN EN IEC 61857-33 E:2024 Draft Document - Electrical insulation systems - Procedures for thermal evaluation - Part 33: Multifactor evaluation with increased ageing factors at elevated temperature (IEC 112/605/CDV:2023); German and English version prEN IEC 61857-33:2023
DIN EN 60811-401 E:2010 Draft Document - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 20/1137/CDV:2010); German version FprEN 60811-401:2010
DIN EN 60811-401:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012 + A1:2017); German version EN 60811-401:2012 + A1:2017
IEC 60811-1-2:1985/COR1:1986 Corrigendum 1 - Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
DIN EN 60811-412 E:2010 Draft Document - Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 20/1148/CDV:2010); German version FprEN 60811-412:2010
AS 1334.6:1976 Methods of testing conveyor and elevator belting - Resistance of covers to ageing
DIN EN 60811-401/A1 E:2015 Draft Document - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 20/1521/CD:2014)
ETSI TR 103 509:2019 SmartM2M; SAREF extension investigation; Requirements for eHealth/Ageing-well
ETSI TS 103 410-8:2020 SmartM2M; Extension to SAREF; Part 8: eHealth/Ageing-well Domain
AENOR UNE 56777-3:1992 Slatted boards. Determination of the resistance of adhesive lines. Part 3: resistance after an aging cycle.
BS ISO 18543:2017 Glass in building. Electrochromic glazings. Accelerated ageing test and requirements
AS 1334.6:1985 Methods of testing conveyor and elevator belting - Determination of resistance of covers to ageing
AENOR UNE 21117-10:1970 Dry insulating materials for cables. Chlorusulfonated polyethylene for cable insulation and covers.
11/30212452 DC BS ISO 2951. Vulcanized rubber. Determination of insulation resistance
CEI EN IEC 62465:2020 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems
BS 6469-4-4.1:1992 Insulating and sheathing materials of electric cables. Methods of test specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking. Wrapping test after thermal ageing in air. Measurement of the melt flow index. Carb...
DANSK DS/EN IEC 62465:2019 Nuclear power plants – Instrumentation and control important to safety – Management of ageing of electrical cabling systems
BS 903-C5:1983 Methods of testing vulcanized rubber.-Determination of insulation resistance
CEI EN IEC 60034-27-4 ERTA:2018 Rotating electrical machines Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
DANSK DS/EN IEC 60034-27-4:2018 Rotating electrical machines – Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
CEI EN IEC 60034-27-4:2018 Rotating electrical machines Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
IEC 60811-4-1:1985/AMD1:1988 Amendment 1 - Common test methods for insulating and sheathing materials of electric cables - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Wrapping test after thermal ageing in a...
DANSK DS/EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators – Part 3: Frequency aging test methods
CEI EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 3: Frequency aging test methods

GSO, Insulation Aging Electrical Aging

OS GSO IEC 60216-4-3:2015 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
BH GSO IEC 60216-4-3:2016 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
GSO IEC 61065:2015 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
OS GSO IEC 61065:2015 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
BH GSO IEC 60450:2016 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
OS GSO IEC 60450:2013 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
OS GSO IEC 60216-4-1:2015 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
BH GSO IEC 60216-4-1:2016 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
GSO IEC 60544-5:2015 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
BH GSO IEC 60544-5:2016 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
GSO IEC 60216-1:2017 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
OS GSO IEC 60216-1:2017 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
OS GSO IEC 60216-4-2:2015 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
BH GSO IEC 60216-4-2:2016 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
GSO IEC 60811-412:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
GSO IEC 60811-401:2013 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
BH GSO IEC 60811-401:2015 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
OS GSO IEC 60811-401:2013 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
GSO ISO 11561:2014 Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
OS GSO ISO 11561:2014 Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BH GSO ISO 11561:2016 Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BH GSO IEC 62342:2016 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
GSO IEC 60034-27-4:2021 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
BH GSO IEC 60034-27-4:2022 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

AENOR, Insulation Aging Electrical Aging

UNE-EN 61065:1996 METHOD FOR EVALUATING THE LOW TEMPERATURE FLOW PROPERTIES OF MINERAL INSULATING OILS AFTER AGEING.
UNE-EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties. Part 4-3: Ageing ovens - Multi-chamber ovens.
UNE-EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties -- Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C.
UNE-EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
UNE-EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
UNE 21628:1995 GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION.

Japanese Industrial Standards Committee (JISC), Insulation Aging Electrical Aging

JIS C 2143-4-3:2014 Electrical insulating materials.Thermal endurance properties.Part 4-3: Ageing ovens.Multi-chamber ovens
JIS C 2143-4-1:2014 Electrical insulating materials -- Thermal endurance properties -- Part 4-1: Ageing ovens -- Single-chamber ovens
JIS C 2143-1:2011 Electrical insulating materials -- Properties of thermal endurance -- Part 1: Ageing procedures and evaluation of test results
JIS C 2143-1:2015 Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
JIS C 2143-4-2:2014 Electrical insulating materials -- Thermal endurance properties -- Part 4-2: Ageing ovens -- Precision ovens for use up to 300 degree C
JIS C 3660-1-2:2003 Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-2: Methods for general application -- Thermal ageing methods
JIS C 3660-1-2:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 1: Methods for general application -- Section 2: Thermal ageing methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Insulation Aging Electrical Aging

GB/T 11026.6-2010 Electrial insulating materials.Thermal endurance properties.Part 6:Ageing ovens.Multi-chamber ovens
GB/T 11026.4-2012 Electrical insulating materials.Thermal endurance properties.Part 4:Ageing ovens.Single-chamber ovens
GB/T 29305-2012 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance-Part 1:Ageing procedures and evaluation of test results
GB/T 11026.1-2016 Heat resistance of electrical insulating materials - Part 1: Aging procedures and evaluation of test results
GB/T 11026.4-1999 Guide for the determination of thermal endurance properties of electrical insulating materials-Part 4: Ageing ovens-Single-chamber ovens
GB/T 11026.5-2010 Electrical insulating materials.Thermal endurance properties.Part 5:Ageing ovens.Precision ovens for use up to 300℃
GB/T 26168.4-2010 Electrical insulating materials.Determination of the effects of ionizing radiation.Part 4:Procedures for assessment of ageing in service
GB/T 26168.4-2018 Electrical insulating materials.Determination of the effects of ionizing radiation.Part 4:Procedures for assessment of ageing in service
GB/T 22566.1-2008 Electrical stresses induced by repetitive pulses in electrical insulation systems - Part 1: General method for electrical aging assessment
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
GB/T 15750-2008 Test methods for the properties of piezoelectric ceramics.Test for the ageing properties
GB/T 1692-2008 Vulcanized rubber.Determination of the insulation resistivity

ZA-SANS, Insulation Aging Electrical Aging

SANS 6284-5:2007 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 5: Ageing tests
SANS 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric and optical cables Part 1: Methods for general application Section 2: Thermal ageing methods

KR-KS, Insulation Aging Electrical Aging

KS C IEC 60450-2008(2023) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60216-4-3-2018 Electrical insulating materials — Thermal endurance properties — Part 4-3: Ageing ovens — Multi-chamber ovens
KS C IEC 60216-4-3-2018(2023) Electrical insulating materials — Thermal endurance properties — Part 4-3: Ageing ovens — Multi-chamber ovens
KS C IEC 60216-1-2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results
KS C IEC 60216-4-1-2008(2023) Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 60811-1-2-2020 Common test methods for insulating and sheathing materials of electric cables — Part 1: Methods for general application —Section 2: Thermal ageing methods
KS C IEC 62884-3-2023 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators — Part 3: Frequency aging test methods

未注明发布机构, Insulation Aging Electrical Aging

DIN EN 60811-1-2-DIN VDE 0473 Teil 811-1-2:2001 Insulating and sheathing materials for cables and insulated lines General test methods Part 1: General application – Main section 2: Thermal aging

CENELEC - European Committee for Electrotechnical Standardization, Insulation Aging Electrical Aging

EN 60544-5:2003 Electrical insulating materials Determination of the effects of ionizing radiation Part 5: Procedures for assessment of ageing in service
EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
EN 60216-1:2001 Electrical Insulating Materials - Properties of Thermal Endurance Part 1: Ageing Procedures and Evaluation of Test Results
EN 60811-1-2:1995 Insulating and Sheathing Materials of Electric Cables Common Test Methods Part 1: General Application Section 2: Thermal Ageing Methods
EN IEC 62884-3:2018 Measurement techniques of piezoelectric@ dielectric and electrostatic oscillators - Part 3: Frequency aging test methods

Group Standards of the People's Republic of China, Insulation Aging Electrical Aging

T/CEC 439-2021 35kV and below XLPE power cable water tree aging insulation repair technical guidelines
T/CEC 405-2020 On-site Detection Method of Laser Raman Spectroscopy for Aging Signatures in Mineral Insulating Oil
T/CEC 621.1-2022 Aging evaluation and repair technology of silicone rubber for external insulation of power system Part 1: Technical conditions of silicone rubber cleaning and repairing agent
T/CAS 500.1-2021 Technology of elderly-oriented intelligent household appliances - part1：general requirements
T/CAS 500.5-2021 Technology of elderly-oriented intelligent household appliances - part 5：special requirements for televisions
T/CAS 500.3-2021 Technology of elderly-oriented intelligent household appliances – part 3：special requirements for household refrigerator

NL-NEN, Insulation Aging Electrical Aging

NEN 11065-1993 Mineral insulating oils. Method for evaluating the low temperature flow properties after ageing (IEC 1065:1991)

ES-UNE, Insulation Aging Electrical Aging

UNE-EN IEC 60544-5:2022 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (Endorsed by AENOR in July of 2012.)
UNE-EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results (Endorsed by AENOR in October of 2013.)
UNE-EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties -- Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006). (Endorsed by AENOR in August of 2006.)
UNE 211605:2022 Climatic ageing test of outer covering cables.
UNE-EN 60811-401:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
UNE-EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators – Part 3: Frequency aging test methods (Endorsed by Asociación Española de Normalización in June of 2018.)

Professional Standard - Machinery, Insulation Aging Electrical Aging

JB/T 1544-2015 Rapid test procedure for thermal endurance of electrical insulating impregnting varnishes and varnished fabrics.Thermogravameric point slope(TPS) method
JB/T 1544-1999 Rapid test procedure for thermal endurance of electrical insulating impregnating varnishes and varnished fabrics-thermogravameric point slope (TPS)method
JB/T 12239-2015 Feedback Aging Test Method for DC Power Supply

RO-ASRO, Insulation Aging Electrical Aging

STAS 10514/1-1991 DETERMINATION OF THERMAL RNDURANCE PROFERTIES OF ELECTRICAL INSULATING MATERIALS General guidelines for ageing and evaluation of test results
STAS 11388/2-1983 GABLES AND CORDS METHODS OF TEST Thermal aging
STAS 5162/4-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEATH Methods of acceleiated aging
STAS 11475-1980 ELECTROINSULATING OILS etermination of induction period at oxidation
STAS 8908-1984 Electrical insulating oils Determination of oxidation stability Baader method

Lithuanian Standards Office , Insulation Aging Electrical Aging

LST EN 61065-2001 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991)
LST EN 60216-4-3-2002 Electrical insulating materials. Thermal endurance properties. Part 4-3: Ageing ovens. Multi-chamber ovens (IEC 60216-4-3:2000)
LST EN 60544-5-2012 Electrical insulating materials - Determination of the effects of ionizing radiation -- Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2011)
LST EN 60216-4-1-2006 Electrical insulating materials - Thermal endurance properties -- Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006)
LST EN 60216-1-2013 Electrical insulating materials - Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013)
LST EN 60216-1-2002 Electrical insulating materials. Properties of thermal endurance. Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2001)
LST EN 60216-4-2-2002 Electrical insulating materials. Thermal endurance properties. Part 4-2: Ageing ovens. Precision ovens for use up to 300 °C (IEC 60216-4-2:2000)
LST EN 60811-412-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012)
LST EN 60811-401-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012)
LST EN 50363-3-2006 Insulating, sheathing and covering materials for low voltage energy cables. Part 3: PVC insulating compounds

BE-NBN, Insulation Aging Electrical Aging

NBN C 30-811-1-2-1992 COMMON TEST METHODS FOR INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES Part 1 : Methods for general application Section Two - Thermal ageing methods

International Organization for Standardization (ISO), Insulation Aging Electrical Aging

ISO 18393-1:2012 Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose-fill insulation for ventilated attics
ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO 2951:2019 Rubber, vulcanized rubber — Determination of insulation resistance
ISO 2951:1974 Vulcanized rubber; Determination of insulation resistance
ISO/FDIS 18393-1:2023 Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling
ISO/DIS 18393-1 Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling

ES-AENOR, Insulation Aging Electrical Aging

UNE 21-170 Pt.1-2-1990 Common test methods for cable insulation and sheathing. Part 1: General usage. Paragraph 2: Methods of thermal aging

TIA - Telecommunications Industry Association, Insulation Aging Electrical Aging

EIA-455-101A-1988 FOTP-101 Accelerated Oxygen Aging of Fiber Optic Cables and Devices
EIA-455-17A-1988 FOTP-17 Maintenance Aging of Fiber Optic Connectors and Terminated Cable Assemblies

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Insulation Aging Electrical Aging

IEEE 1205-2006 Guide for Assessing@ Monitoring@ and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations Corrigendum 1: Thermal Aging Model Corrections
IEEE 1407-1998 Trial-Use Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks
IEEE 1205-1993 Guide for Assessing@ Monitoring@ and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations

CZ-CSN, Insulation Aging Electrical Aging

CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film

GOST, Insulation Aging Electrical Aging

GOST 9.108-2023 Unified system of corrosion and ageing protection. Cathodic protection. Terms and definitions
GOST R 9.605-2021 Unified system of corrosion and ageing protection. Electrochemical protection. Reference electrodes. General specifications
GOST R 9.606-2021 Unified system of corrosion and ageing protection. Electrochemical protection. Control and measuring points. General specifications
GOST R EN 1296-2011 Roofing and hydraulic-insulating flexible bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method of artificial ageing by long-term exposure to elevated temperature

Indonesia Standards, Insulation Aging Electrical Aging

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods
SNI 7610-2011 Gassing of insulating liquids under electrical stress and ionization

VN-TCVN, Insulation Aging Electrical Aging

TCVN 6614-1-2-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-2: Methods for general application.Thermal ageing methods

国家市场监督管理总局、中国国家标准化管理委员会, Insulation Aging Electrical Aging

GB/T 40720-2021 Rubber,vulcanized rubber—Determination of insulation resistance

European Committee for Standardization (CEN), Insulation Aging Electrical Aging

prEN ISO 18393-1 Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Insulation Aging Electrical Aging

JEDEC JEP163-2015 Selection of Burn-In/Life Test Conditions and Critical Parameters for QML Microcircuits

Electronic Components, Assemblies and Materials Association, Insulation Aging Electrical Aging

ECA EIA-364-24B-1998 TP-24B MAINTENANCE AGING TEST PR OCEDURE FOR ELECTRICAL CONNECTORS

European Association of Aerospace Industries, Insulation Aging Electrical Aging

AECMA PREN 3475-401-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 401 - Accelerated Ageing Edition P 2
AECMA PREN 3475-401-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 401 - Accelerated Ageing Issue P 1
AECMA PREN 3475-409-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 409 - Air-Excluded Ageing Issue P 1

Defense Logistics Agency, Insulation Aging Electrical Aging

DLA MIL-PRF-39018/6 D-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), ESTABLISHED RELIABILITY STYLE CUR91 (INSULATED)

VDE - VDE Verlag GmbH@ Berlin@ Germany, Insulation Aging Electrical Aging

VDE 0207-6-2004 Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers

BR-ABNT, Insulation Aging Electrical Aging

ABNT EB-59-1958 Insulated electrical conductor with vulcanized natural rubber compound

ECIA - Electronic Components Industry Association, Insulation Aging Electrical Aging

540H000-1998 Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment