ZH
RU
ES
Super Thermally Conductive Material
Super Thermally Conductive Material, Total:450 items.
In the international standard classification, Super Thermally Conductive Material involves: Vocabularies, Education, Heat recovery. Thermal insulation, Ceramics, Footwear, Pipeline components and pipelines, Seals, glands, Housings, enclosures, other machine parts, Protection of and in buildings, Plastics, Products of non-ferrous metals, Refractories, Thermodynamics and temperature measurements, Conducting materials, Analytical chemistry, Construction materials, Electronic components in general, (No title), Crude petroleum, Insulating fluids, Standardization. General rules, Office machines, Paper products, Metrology and measurement in general, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Products of the textile industry, Products of the chemical industry, Non-destructive testing, Materials for aerospace construction, Aerospace fluid systems and components, Organic chemicals, Farming and forestry, Road vehicle systems, Semiconducting materials, Medical equipment, Surface treatment and coating, Magnetic materials, Lubricants, industrial oils and related products, Welding, brazing and soldering, Industrial furnaces, Electrical wires and cables, Test conditions and procedures in general, Ferroalloys, Protective equipment, Rubber and plastics products, Wastes, Semiconductor devices, Printed circuits and boards, Protection against fire, Power transmission and distribution networks, Reinforced plastics, Electrical accessories.
RU-GOST R, Super Thermally Conductive Material
- GOST 23869-1979 Superconductor materials. Terms and definitions
- GOST 7076-1999 Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
- GOST 7076-1978 Building materials. Method of thermal conductivity determination
- GOST 7076-1987 Building materials and products. Method of thermal conductivity determination
- GOST R 54254-2010 Carbon materials. Test method for thermal conductivity at room temperature
- GOST 28549.13-1991 Lubricants, industrial oils and related products (class L). Classification. Family G. Slideways
- GOST 28549.12-1991 Lubricants, industrial oils and related products (class L). Classification. Family Q. Heat transfer fluids
- GOST R 8.621-2006 State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method
- GOST 28913-1991 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
- GOST R 57996-2017 Polymer composites. Differential scanning calorimetry. Determination of activation energy, pre-exponential factor and reaction order
- GOST R ISO 12127-1-2011 Occupational safety standards system. Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Part 1. Test method using heat produced by heating cylinder
VN-TCVN, Super Thermally Conductive Material
- TCVN 7194-2002 Thermal insulating materials.Classification
- TCVN 6530-9-2007 Refractory materials.Method of test.Part 9: Determination of thermal conductivity by the Hot-Wire method (cross-array)
- TCVN 6876-1-2010 Clothing for protection against heat and flame.Determination of contact heat transmission through proctective clothing or constituent materials. Part 1: Test method using contact heat produced by heating cylinder
Sichuan Provincial Standard of the People's Republic of China, Super Thermally Conductive Material
- DB51/T 1261-2011 Heat conduction experiment material
- DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method
CU-NC, Super Thermally Conductive Material
- NC 15-74-1987 Thermotechnics. Material Thermal Conductivity Values
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Super Thermally Conductive Material
- GB/T 17410-2008(英文版) Organic heat transfer material heaters
- GB/T 5990-2006 Refractory materials. Determination of thermal conductivity. Hot-wire method
- GB/T 17106-1997 Refractory materials--Determination of thermal conductivity--Hot-wire method (parallel)
- GB/T 10297-2015 Test method for thermal conductivity of nonmetal solid materials.Hot-wire method
- GB/T 10297-1998 Test method for thermal conductivity of nonmetal solid materials by hot-wire method
- GB/T 8722-2008 Method for the determination of thermal conductivity of graphite materials at median temperature
- GB/T 32981-2016 Method for determination of equivalent thermal conductivity of wall materials
- GB/T 8722-1988 Method for the determination of thermal conductivity of graphite materials at median temperature
- GB/T 29313-2012 Test method for thermal transmission properties of electrical insulation materials
- GB/T 32064-2015 Test method for thermal conductivity and thermal diffusivity of building materials with transient plane heat source
- GB/T 18475-2001 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall Service(design) coefficient
- GB/T 36133-2018 Refractory materials.Determination of thermal conductivity (Platinum resistance thermometer method)
- GB/T 11026.9-2016 Electrical insulating materials.Thermal endurance properties.Part 9:Instructions for calculating thermal endurance characteristics using simplified procedures
- GB/T 20671.10-2006 Classification system and test methods for nonmetallic gasket materials-Part10:Standard practice for evaluating thermal conductivity of gasket materials
- GB/T 11026.4-1999 Guide for the determination of thermal endurance properties of electrical insulating materials-Part 4: Ageing ovens-Single-chamber ovens
- GB/T 11026.2-2000 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 2: Choice of test criteria
Chongqing Provincial Standard of the People's Republic of China, Super Thermally Conductive Material
British Standards Institution (BSI), Super Thermally Conductive Material
- BS DD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal conductivity
- DD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
- BS EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Hot-wire methods (cross-array and resistance thermometer)
- PD IEC TR 63304:2021 Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet
- BS EN 1159-1:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal expansion
- BS EN 1159-1:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1:Determination of thermal expansion
- BS IEC 62899-202-10:2023 Printed electronics - Materials. Resistance measurement method for thermoformable conducting layer
- BS ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
- BS ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion
- BS EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
- BS EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal diffusivity
- BS EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3:Determination of specific heat capacity
- BS IEC 62951-5:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for thermal characteristics of flexible materials
- BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
- BS ISO 4765:2022 Chemically-induced ultraweak photon emission (UPE). Measurement as an analysis method of degradation of polymeric material
- 23/30468955 DC BS EN IEC 60404-18. Magnetic materials - Part 18. Permanent magnet (magnetically hard) materials. Methods of measurement of the magnetic properties in an open magnetic circuit using a superconducting magnet
- BS ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
- BS PD IEC TR 63304:2021 Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet
- BS ISO 27447:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials
- BS ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
- BS ISO 19635:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antialgal activity of semiconducting photocatalytic materials
- BS ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
- 21/30423455 DC BS ISO 4765. Chemically Induced UPE (ultra-weak photon emission). Measurement as an analysis method of degradation of polymeric material
- BS EN ISO 12127-1:2015 Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials. Contact heat produced by heating cylinder
- BS EN 702:1995 Protective clothing - Protection against heat and flame - Test method - Determination of the contact heat transmission through protective clothing or its materials
- 22/30425870 DC BS ISO 24687. Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
- BS PD CEN/TR 15310-3:2006 Characterization of waste — Sampling of waste materials —
Part 3: Guidance on procedures for sub-sampling in the field
- BS EN 14186:2007 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
- BS 1902-5.14:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (temperatures up to 1500 °C) (methods 1902-5.14)
- BS ISO 22197-4:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Removal of formaldehyde
- BS ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Removal of acetaldehyde
- BS 5691-4.1:1995 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing ovens - Single chamber ovens
- BS ISO 22197-5:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Removal of methyl mercaptan
- BS ISO 27448:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle
- BS ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
- BS 1902-5.8:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal conductivity (split column method) (method 1902-508)
- BS ISO 22197-1:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Removal of nitric oxide
- BS ISO 19722:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
- BS 1902 Sec.5.8:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (split column method) (method 1902-508)
- BS ISO 18061:2014 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Q-beta
- BS ISO 18610:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique
Professional Standard - Electricity, Super Thermally Conductive Material
- DL/T 1161-2012 The technical inspection codes for metal and structural components in ultra-supercritical units
BR-ABNT, Super Thermally Conductive Material
ZA-SANS, Super Thermally Conductive Material
Group Standards of the People's Republic of China, Super Thermally Conductive Material
- T/CSEE 0292-2022 Guidelines for the selection of materials and specifications for main steam, reheat steam and water supply pipelines of super (super) critical units in thermal power plants
- T/CNIA 0143-2022 Ultrapure Resin Vessels for Trace Impurity Analysis of Semiconductor Materials
- T/CGIA 035-2022 Practice guides of graphene materials used for high thermal conductivity films
- T/ZAS 2007-2022 General technical requirements for silicone-based thermal interface materials
- T/CSCM 06-2020 Carbon fiber reinforced resin matrix composite materials cryoresistive dangling ring for nuclear magnetic resonance
- T/CWAN 0029.3-2021 Methods for chemical analysis of nickel-based welding materials-Part 3: Determination of nitrogen content by inert gas fusion thermal conductivity method
American Society for Testing and Materials (ASTM), Super Thermally Conductive Material
- ASTM F433-98 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
- ASTM B884-11 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
- ASTM B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
- ASTM B884-97 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
- ASTM B884-01 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
- ASTM E977-84(1999) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
- ASTM E977-05(2019) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
- ASTM E2584-20 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
- ASTM F433-02(2020) Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
- ASTM C201-93(1998) Standard Test Method for Thermal Conductivity of Refractories
- ASTM C201-93(2004) Standard Test Method for Thermal Conductivity of Refractories
- ASTM C201-93(2019) Standard Test Method for Thermal Conductivity of Refractories
- ASTM C201-93(2013) Standard Test Method for Thermal Conductivity of Refractories
- ASTM C201-93(2019)e1 Standard Test Method for Thermal Conductivity of Refractories
- ASTM C201-93(2009) Standard Test Method for Thermal Conductivity of Refractories
- ASTM D5740-97 Standard Guide for Writing Material Standards in the Classification D4000 Format
- ASTM D5740-16 Standard Guide for Writing Material Standards in the Classification Format
- ASTM D5470-17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
- ASTM D1518-85(2003) Standard Test Method for Thermal Transmittance of Textile Materials
- ASTM E977-05 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
- ASTM E977-05(2014) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
- ASTM C767-93(2009) Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM D1518-11 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
- ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
- ASTM E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
- ASTM C767-93(2004) Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM C767-93(1998) Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM E977-05(2010) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
- ASTM C767-20 Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM C767-93(2013) Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM D5470-06 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
- ASTM D5470-06(2011) Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
- ASTM D5470-12 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
- ASTM F433-02 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
- ASTM F433-02(2009) Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
- ASTM F433-02(2014)e1 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
- ASTM C417-05 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
- ASTM E2584-14 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance 40;Slug41; Calorimeter
- ASTM D3004-02 Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
- ASTM D3004-97 Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
- ASTM D3004-08(2020) Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials
- ASTM C1290-06 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
- ASTM C1290-00 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
- ASTM C1290-00e1 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
- ASTM C1290-04 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
- ASTM C1290-06e1 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
- ASTM D5470-01 Standard Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
- ASTM D5470-95 Standard Test Methods for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
- ASTM D6343-99(2004) Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM D6343-99 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM C417-05(2010)e1 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
- ASTM C1702-09 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C417-93(1998) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
- ASTM C417-21 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
- ASTM C417-05(2015) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
- ASTM C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
- ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D6343-10 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D6095-99 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
- ASTM C1702-15a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D6343-14 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM D6343-14(2018) Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM D6095-05 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
- ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
- ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
- ASTM D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
- ASTM B987/B987M-20 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
- ASTM D6095-12(2018) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
Taiwan Provincial Standard of the People's Republic of China, Super Thermally Conductive Material
- CNS 330-1954 Hand Wheels of Low Heat Insulation Materials
- CNS 7333-1981 Method of Determination for Thermal Conductivity of Heat Insulating Materials by Means of the Guarded Hot Plate
- CNS 7332-1981 Method of Determination for Thermal Conductivity of Heat Insulating Materials by Means of Comparison with a Standard Plate of Known Conductivity
Danish Standards Foundation, Super Thermally Conductive Material
- DS/CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
- DS/EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
- DS/IEC 216-2:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 2: Choice of test criteria
- DS/EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of specific heat capacity (ISO 19628:2017)
- DS/ENV 1159-1:1993 Advanced technical ceramics. Ceramic composites. Thermophysical properties. Part 1: Determination of thermal expansion
- DS/EN 1159-1:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
- DS/EN 1159-3/AC:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- DS/EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- DS/ENV 1159-2:1993 Advanced technical ceramics. Ceramic composites. Thermophysical properties. Part 2: Determination of thermal diffusivity
- DS/EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
- DS/EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)
- DS/CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
- DS/IEC 216-1:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 1: General guidelines for ageing procedures and evaluation of test results
- DS/EN ISO 9080:2013 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
- DS/IEC 216-4:1982 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 4: Instruction for calculating the thermal endurance profile
- DS/EN ISO 18610:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure – Determination of elastic properties by ultrasonic technique (ISO 18610:2016)
Association Francaise de Normalisation, Super Thermally Conductive Material
- XP B43-209*XP CEN/TS 1159-4:2005 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4 : determination of thermal conductivity
- NF P50-741*NF EN ISO 9251:1996 Thermal insulation. Heat transfer conditions and properties of materials. Vocabulary.
- NF EN IEC 61788-26:2020 Supraconductivité - Partie 26 : mesurage du courant critique - Courant critique continu des composites supraconducteurs de RE-Ba-Cu-O
- NF EN IEC 61788-4:2020 Supraconductivité - Partie 4 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des composites supraconducteurs de Nb-Ti et de Nb3Sn
- NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
- NF X10-021:1972 Matériaux faiblement conducteurs - Détermination de la conductivité thermique - Méthode de la plaque chaude gardée avec échantillons symétriques
- NF B40-316:1989 Refractory materials. Determination of thermal conductivity. Part 2 : hot-wire method (parallel).
- NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
- NF C26-305:1993 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 5 : guidelines for the application of thermal endurance characteristics.
- NF P50-788*NF ISO 16957:2018 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
- NF B43-365*NF EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
- NF B43-207*NF EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
- NF B44-103*NF ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
- NF ISO 16957:2018 Détermination de la conductivité thermique apparente des matériaux de construction poreux et mouillés par une méthode périodique
- NF EN IEC 62677-3-103:2019 Profilés thermorétractables basse et moyenne tensions - Partie 3 : spécification pour matériaux particuliers - Feuille 103 : profilés thermorétractables conducteurs en polyoléfine pour applications moyenne tension
- NF B40-335-1*NF EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1 : hot-wire methods (cross-array and resistance thermometer)
- XP CEN/TS 1159-4:2005 Céramiques techniques avancées - Composites céramiques, propriétés thermophysiques - Partie 4 : détermination de la conductivité thermique
- NF EN ISO 8894-1:2010 Matériaux réfractaires - Détermination de la conductivité thermique - Partie 1 : Méthodes du fil chaud ("croisillon" et "thermomètre à résistance")
- NF B43-404*NF EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
- XP A92-802*XP CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
- NF C31-888-13:2003 Superconductivity - Part 13 : AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites.
- NF EN 50525-3-31:2012 Câbles électriques - Câbles d'énergie basse tension de tension assignée au plus égale à 450/750 V (U0/U) - Partie 3-31 : câbles à performances spéciales au feu - Conducteurs isolés en matériau thermoplastique sans halogène, à faible dég...
- NF EN IEC 61189-2-801:2023 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 2-801 : essai de conductivité thermique pour matériaux de base
- NF B44-101-5:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5: removal of methyl mercaptan
- NF B44-101-5*NF ISO 22197-5:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5 : removal of methyl mercaptan
- NF B43-354:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique
Korean Agency for Technology and Standards (KATS), Super Thermally Conductive Material
- KS L 9016-2010(2022) Test methods for thermal transmission properties of thermal insulations
- KS F 2463-2009 Method of thermal conductivity test for materials
- KS F 2463-1986 Method of thermal conductivity test for materials
- KS L 9016-2010 Test methods for thermal transmission properties of thermal insulations
- KS F 2463-2019 Standard test method of thermal conductivity for materials by means of the guarded hot plate
- KS L ISO 8894-2:2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
- KS L ISO 8894-2:2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
- KS L ISO 10051-2006(2021) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
- KS M ISO 10051-2012(2017) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
- KS L ISO 10051-2006(2016) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
- KS L ISO 8894-2-2016(2021) Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
- KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
- KS C IEC 60216-2:2008 Electrical insulating materials－Thermal endurance properties－Part 2：Determination of thermal endurance properties of electrical insulating materials－Choice of test criteria
- KS L ISO 27447-2011(2016) Fine ceramics (advanced ceramics, advanced technical ceramics)－Test method for antibacterial activity of semiconducting photocatalytic materials
- KS L ISO 27447-2011(2021) Fine ceramics (advanced ceramics, advanced technical ceramics)－Test method for antibacterial activity of semiconducting photocatalytic materials
- KS L ISO 8894-1:2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
- KS L ISO 8894-1:2016 Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
- KS L ISO 27447:2011 Fine ceramics (advanced ceramics, advanced technical ceramics)－Test method for antibacterial activity of semiconducting photocatalytic materials
- KS C IEC 60216-4-2:2002 Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
- KS L ISO 8894-1-2016(2021) Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
- KS M ISO TR 9080:2015 Thermoplastics pipes for the transport of fluids--Methods of extrapolation of hydrostatic stress rupture data to determine the long--term hydrostatics strength of thermoplastics pipe materials
- KS M ISO TR 9080:2003 Thermoplastics pipes for the transport of fluids-Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatics strength of thermoplastics pipe materials
- KS L ISO 27448-2011(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for self-cleaning performance of semiconducting photocatalytic materials－Measurement of water contact angle
- KS L ISO 27448-2011(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for self-cleaning performance of semiconducting photocatalytic materials－Measurement of water contact angle
- KS C IEC 60216-4-1:2008 Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
- KS L ISO 27448:2011 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for self-cleaning performance of semiconducting photocatalytic materials-Measurement of water contact angle
- KS L ISO 10676-2012(2022) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxyg
- KS L ISO 22197-4:2020 Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
American National Standards Institute （ANSI), Super Thermally Conductive Material
- ANSI/ASTM D5476:1999 Classification for Thermoplastic Polyurethane Materials
- ANSI/ASTM D3004:2008 Specification for Extruded Crosslinked and Thermoplastic Semi-conducting, Conductor and Insulation Shielding Materials
- ANSI/ASTM D6343:2010 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ANSI/ASTM D6095:2012 Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
BE-NBN, Super Thermally Conductive Material
RO-ASRO, Super Thermally Conductive Material
- STAS 5912-1989 Homogeneous building materials THERMAL CONDUCTIVITY DETERMINATION
- STAS SR ISO 9251:1993 Thermal insulation. Heat transfer conditions and properties of materials. Vocabulary
- STAS SR 13204-1994 Non destructive testing. Thermoelectric sorting method of conducting materials
BELST, Super Thermally Conductive Material
- STB GOST R 50302-2003 Regrind-able super-hand material (composite) tipped cartridges for tool-holders. Specifications
IT-UNI, Super Thermally Conductive Material
European Committee for Standardization (CEN), Super Thermally Conductive Material
- PD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
- EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
- EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)
- EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014)
- HD 402 S2-1984 Standard colours for thermoplastic materials used for the insulation for low-frequency cables and wires
- EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
- EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018)
- PD CEN/TR 15310-3:2006 Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field
- HD 611.2 S1-1992 Guide for the determination of thermal endurance properties of electrical insulating materials; part 2: choice of test criteria (IEC 216-2:1990)
- EN ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
- EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- DD ENV 1159-1-1993 Advanced Technical Ceramics - Ceramic Composites - Thermophysical Properties - Part 1: Determination of Thermal Expansion (Superseded by EN 1159-1: 2003)
- EN 1159-2:2003 Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 2: Determination of thermal diffusivity
- HD 611.4.1 S1-1992 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens (IEC 216-4-1:1990)
- EN ISO 18610:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016)
- EN ISO 12162:1995 Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design) Coefficient (ISO 12162 : 1995)
- DD ENV 1159-2-1993 Advanced Technical Ceramics - Ceramic Composites - Thermophysical Properties - Part 2: Determination of Thermal Diffusivity Superseded by EN 1159-2: 2003
- EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
IN-BIS, Super Thermally Conductive Material
Japanese Industrial Standards Committee (JISC), Super Thermally Conductive Material
- JIS A 1412:1994 Test methods for thermal transmission properties of thermal insulations
- JIS R 2251-2:2007 Test methods for thermal conductivity of refractory materials -- Part 2: Hot-wire method (parallel)
- JIS R 2251-3:2007 Test methods for thermal conductivity of refractory materials -- Part 3: Stationary heat flow method
- JIS C 2500:2022 Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
- JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
- JIS R 2251-1:2007 Test methods for thermal conductivity of refractory materials -- Part 1: Hot-wire method (cross-array)
- JIS A 1413:1977 Standard method of test for thermal conductivity of heat insulating materials by means of the guarded hot plate
- JIS R 1712:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for antialgal activity of semiconducting photocatalytic materials
- JIS H 7311:2006 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
German Institute for Standardization, Super Thermally Conductive Material
- DIN EN ISO 9251:1996 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987); German version EN ISO 9251:1995
- DIN 50003:2023-08 Adhesive bondings in electronic applications - Determination of thermal conductivity of materials for heat dissipation / Note: Date of issue 2023-06-30
- DIN 51908:2022-10 Testing of carbonaceous materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
- DIN 52612-3:1979 Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Thermal Resistance of Laminated Materials for Use in Building Practice
- DIN 51908:2006-05 Testing of carbon materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
- DIN EN 1159-3:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity(includes Corrigendum AC:2008); English version of DIN EN 1159-1:2008-06
- DIN EN 1159-1:2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007); English version of DIN EN 1159-1:2007
- DIN EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C (IEC 60216-4-2:2000); German version EN 60216-4-2:2000
- DIN CEN/TS 1159-4:2004-10 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004
- DIN EN 1159-2:2003 Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 2: Determination of thermal diffusivity; German version EN 1159-2:2003
- DIN 50011-2:1960 Testing of Materials, Structural Components and Equipment; Hot Cabinets; Directions for the Storage of Specimens
- DIN EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes; German and English version EN 3718:2012
- DIN EN ISO 8894-1:2010-10 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010); German version EN ISO 8894-1:2010
- DIN 52612-2:1984 Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications
- DIN EN 1159-1 Berichtigung 1:2009 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 1159-1:2003+AC:2007, Corrigendum to DIN EN 1159-1:2007-11
- DIN 49019-3:1975 Conduits and fittings for electrical installation; flexible corrugated and non inflammable conduits of insulating material for light pressure load and a heat resistance up to 105 C
- DIN EN ISO 12127-2:2008 Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007); English vers
Military Standard of the People's Republic of China-General Armament Department, Super Thermally Conductive Material
- GJB 10252-2021 Test method for high-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 329-1987 Test method for medium-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 328-1987 Test method for low-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 2603-1996 Specification for highly thermally conductive microwave absorbing ceramic materials
- GJB 7050-2010 Plat test method in turbulent flow for thermo-protection materials of missile at arc-heater
- GJB 10062-2021 Specification for low thermal conductivity fiber reinforced ceramic matrix composite fasteners
Standard Association of Australia （SAA）, Super Thermally Conductive Material
- AS 1774.14:2008
- AS 1774.14:1992 Refractories and refractory materials - Physical test methods - Thermal conductivity
- AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials
国家市场监督管理总局、中国国家标准化管理委员会, Super Thermally Conductive Material
- GB/T 8722-2019 Test method for thermal conductivity of carbon materials
- GB/T 37796-2019 Insulation refractories—Determination of thermal conductivity（calorimeter）
- GB/T 39429-2020 Non-destructive testing—Method for thermoelectric sorting of electrically conductive materials
- GB/T 5990-2021 Refractory materials—Determination of thermal conductivity, specific heat capacity and thermal diffusivity(hot-wire method)
- GB/T 41062-2021 Test method for thermal transport properties to friction materials and brakes
- GB/T 21227-2021 AC loss measurements—Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
ES-UNE, Super Thermally Conductive Material
- UNE-EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (Endorsed by AENOR in November of 2012.)
- UNE-EN IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normalizaci...
- EN IEC 61189-2-801:2023 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
PL-PKN, Super Thermally Conductive Material
- PN H04181-1992 Refractory materials. Determination of thermal conductivity by hot-wire method
CENELEC - European Committee for Electrotechnical Standardization, Super Thermally Conductive Material
- EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
- EN 61788-13:2003 Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
International Organization for Standardization (ISO), Super Thermally Conductive Material
- ISO 2581:1975 Plastics; Rigid cellular materials; Determination of "apparent" thermal conductivity by means of a heat-flow meter
- ISO 8894-2:2007 Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire method (parallel)
- ISO 8894-2:1990 Refractory materials; determination of thermal conductivity; part 2: hot-wire method (parallel)
- ISO 8894-1:1987 Refractory materials; Determination of thermal conductivity; Part 1 : Hot-wire method (cross-array)
- ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
- ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
- ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
- ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
- ISO 4765:2022 Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
- ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)
- ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antifungal activity of semiconducting photocatalytic materials
- ISO 19635:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antialgal activity of semiconducting photocatalytic materials
- ISO 27447:2019 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials
- ISO 14605:2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
- ISO 27447:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials
- ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
- ISO 9080:2003 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
- ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
- ISO 12162:1995 Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient
- ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
- ISO/TR 14696:1999 Reaction to fire tests - Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
- ISO 27448:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle
- ISO 19722:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
- ISO 18610:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique
- ISO/DTS 16943 Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
- ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 2: Removal of acetaldehyde
- ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 3: Removal of toluene
- ISO 22197-4:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 4: Removal of formaldehyde
- ISO 22197-5:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5: Removal of methyl mercaptan
- ISO 22197-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide
- ISO 22197-4:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 4: Removal of formaldehyde
- ISO 22197-5:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5: Removal of methyl mercaptan
- ISO 18061:2014 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Determination of antiviral activity of semiconducting photocatalytic materials - Test method using bacteriophage Q-beta
CZ-CSN, Super Thermally Conductive Material
- CSN 72 5032-1973 Testing of fired ceram,ic materials Determination of the specific thermal conductivity
- CSN 72 7010 Z1-1995
- CSN 72 7306-1995 Determination of Thermal Conductivity of building materials and products
- CSN 72 7302-1987 Thermal insulation materials from inorganic fibres. Methods of testing
- CSN ISO 8894-2:1994 Refractory materials.Determination of thermal conductivity.Part 2:Hot-wire method(parallel)
- CSN 72 7010-1988 Determination of thermal conductivity coefficient for materials in stabilized thermal state. Common provisions
- CSN 72 5033-1973 Tes.ting of fired ceramic rnaterials. Determination of medium temperatuie conductivity
- CSN 72 7014-1994 Determination of Steady State Thermal Conductivity of Materials. Evaluating of Tests
- CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
- CSN 72 7013-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of Globe
- CSN 72 7011-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of cylinder
- CSN 72 7306-1987 Thermal insulation materials and pro- ducts. Determination of thermal conduc- tivity by the plate method
HU-MSZT, Super Thermally Conductive Material
Professional Standard - Electron, Super Thermally Conductive Material
- SJ/T 11067-1996 Commonly used terminology for semiconductor photoelectric materials and pyroelectric materials in infrared detecting materials
- SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
AT-ON, Super Thermally Conductive Material
- ONORM B 6015-2-2000 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the specific thermal conductivity in building materials
- ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
- ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
- ONORM B 6015 Teil.3-1991 Determination of thermal conductivity by the guarded hot plate apparatus — Use of values of laminated materials on bmlding application
NL-NEN, Super Thermally Conductive Material
- NEN 2444-1991 Determination of the heat resistance and/or the heat transfer co?ffici?nt for building and insulation materials
FI-SFS, Super Thermally Conductive Material
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Super Thermally Conductive Material
- ASHRAE MN-00-2-2-2000 Measurement of Thermal Conductivity for Three Borehole Fill Materials Used for GSHP
- ASHRAE SF-98-1-3-1998 Ground-Coupled Heat Pump Loop Design Using Thermal Conductivity Testing and the Effect of Different Backfill Materials on Vertical Bore Length
Indonesia Standards, Super Thermally Conductive Material
- SNI ISO 8894-2:2010 Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire methods (parallel)
KR-KS, Super Thermally Conductive Material
- KS L ISO 8894-2-2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
- KS L ISO 8894-2-2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
- KS L ISO 10677-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials
- KS L ISO 27447-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials
- KS L ISO 8894-1-2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
- KS L ISO 14605-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
- KS L ISO 22197-4-2020 Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
Lithuanian Standards Office , Super Thermally Conductive Material
- LST EN 61788-13-2013 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012)
- LST EN 1159-3-2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- LST EN 1159-1-2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
- LST EN 1159-3-2003/AC-2007 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- LST EN 1159-1-2003/AC-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
- LST EN 1159-3-2003/AC-2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- LST EN 1159-2-2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
- LST EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
- LST EN 61788-13-2004 Superconductivity. Part 13: AC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites (IEC 61788-13:2003)
Professional Standard - Aviation, Super Thermally Conductive Material
- HB 5367.9-1986 Test method for thermal conductivity of carbon graphite sealing materials
Professional Standard - Energy, Super Thermally Conductive Material
- NB/T 10824-2021 Guidelines for assessing the fire resistance rating of insulating materials used in converter transformers
- NB/T10824-2021
- NB/T 20008.5-2012 Other material for pressurized water reactor nuclear power plants.Part 5：Class 1 and 2 hot rolled nickel-chromium-iron alloy plates
- NB/T 20008.15-2012 Other material for pressurized water reactor nuclear power plants.Part 15：Titanium plate for use in the fabracation of class 3 heat exchanger plates
International Electrotechnical Commission (IEC), Super Thermally Conductive Material
- IEC TR 60216-5:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 5: guidelines for the application of thermal endurance characteristics
- IEC TR 63304:2021 Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
- IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applicatio
- IEC 62951-5:2019 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 5: Test method for thermal characteristics of flexible materials
- IEC 62899-202-10:2023 Printed electronics - Part 202-10: Materials - Resistance measurement method for thermoformable conducting layer
- IEC 60216-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 1: general guidelines for ageing procedures and evaluation of test results
- IEC 61189-2-801:2023 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
European Committee for Electrotechnical Standardization（CENELEC）, Super Thermally Conductive Material
- HD 611.5 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 5: Guidelines for the Application of Thermal Endurance Characteristics
- HD 611.1 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines for Ageing Procedures and Evaluation of Test Results
- EN 60216-4-2:2000 Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius
Jiangsu Provincial Standard of the People's Republic of China, Super Thermally Conductive Material
- DB32/T 3596-2019 Determination of thermal diffusivity and thermal conductivity of graphene materials by flash method
TN-INNORPI, Super Thermally Conductive Material
Anhui Provincial Standard of the People's Republic of China, Super Thermally Conductive Material
- DB34/T 3770-2020 Test method for electrical testing of composite insulators for use in superconducting magnet systems
Professional Standard - Ferrous Metallurgy, Super Thermally Conductive Material
- YB/T 4130-2005 Refractory materials Determination of thermal conductivity (calorimeter)
Professional Standard - Aerospace, Super Thermally Conductive Material
- QJ/Z 164.1-1986 Thermal aging test method for polymer materials Aging test guidelines
GOSTR, Super Thermally Conductive Material
- GOST R 57967-2017 Composites. Determination of thermal conductivity by stationary one-dimensional heat flow heater with a guard
- GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry
PT-IPQ, Super Thermally Conductive Material
- NP 253-1985 Matériaux plastiques. Tubes en matlères thermoplastiques pour le transport des fluides. Diamètres extérieurs nominaux et pressions nomlnales
- NP 116-1962
(U.S.) Ford Automotive Standards, Super Thermally Conductive Material
- FORD WSS-M99G170-A-1995 THERMAL CONDUCTOR, SILICONE RUBBER COATED ALUMINUM FOIL, ADHESIVE COATED, ONE
- FORD ESB-M2D296-A-2004 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D296-A-2009 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
U.S. Military Regulations and Norms, Super Thermally Conductive Material
- ARMY MIL-P-55072 A (1)-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)
- ARMY MIL-P-55072 A-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)
SE-SIS, Super Thermally Conductive Material
- SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity
- SIS SS 16 11 57-1982 Plastics - Amorphous thermoplastic moulding materials - Preparation of test specimens with a defined level of shrinkage - Part 2: Test specimens in the form of rectangular plates (Injection moulding)
CO-ICONTEC, Super Thermally Conductive Material
Association of German Mechanical Engineers, Super Thermally Conductive Material
- DVS 2216-1 Beiblatt 1-2004
- DVS 2216-1 Beiblatt 1-2005 DVS test specimens with an energy director for the ultrasonic welding of thermoplastics and testing conditions
- DVS 2216-4-1992 "Ultrasonic joining of moulded parts and semi-finished parts of thermoplastic polymers in mass production, insertion of metal parts and other materials with ultrasonics"
未注明发布机构, Super Thermally Conductive Material
- DIN EN ISO 19629:2022 High-performance ceramics – Thermophysical properties of ceramic composite materials – Determination of one-dimensional thermal conductivity using flash methods
- BS 1902-5.5:1991(2009) Methods of testing Refractory materials — Part 5 : Refractory and thermal properties — Section 5.5 Determination of thermal conductivity (panel / calorimeter method) (method 1902 - 505)
- BS IEC 61189-2-801:2023 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2 - 801 : Thermal conductivity test for base materials
Professional Standard - Non-ferrous Metal, Super Thermally Conductive Material
- YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method
工业和信息化部, Super Thermally Conductive Material
- YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity
- SH/T 1826-2019 Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)
CEN - European Committee for Standardization, Super Thermally Conductive Material
- PD CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
Society of Automotive Engineers (SAE), Super Thermally Conductive Material
- SAE AMS5895B-2000 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable
- SAE AMS3593A-2012 Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable Marker Sleeving Grade Low Outgassing
AENOR, Super Thermally Conductive Material
- UNE-EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
- UNE-ISO 22197-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Part 1: Removal of nitric oxide
Canadian General Standards Board （CGSB), Super Thermally Conductive Material
- CGSB 51-GP-52MA-1989 Vapor Barrier, Jacket and Facing Material for Pipe, Duct and Equipment Thermal Insulation
Defense Logistics Agency, Super Thermally Conductive Material
- DLA DSCC-DWG-04044 REV A-2007 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260癈, 600 VOLT
- DLA DSCC-DWG-04045 REV A-2007 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200癈, 600 VOLT
- DLA DSCC-DWG-04037-2004 WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEG. C, 600 VOLT
- DLA DSCC-DWG-04040-2004 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEG. C, 600 VOLT
- DLA DSCC-DWG-04046 REV A-2005 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04043 REV A-2007 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200癈, 600 VOLT
SAE - SAE International, Super Thermally Conductive Material
- SAE AMS3593B-2017 Tubing@ Plastic@ Electrical Insulation Irradiated Polyvinylidene Fluoride@ Semi-Rigid@ Heat-Shrinkable Marker Sleeving Grade Low Outgassing