ZH

RU

ES

Method for Determination of Bacteria Concentration

Method for Determination of Bacteria Concentration, Total:499 items.

In the international standard classification, Method for Determination of Bacteria Concentration involves: Laboratory medicine, Pulps, Microbiology, Animal feeding stuffs, Protection against fire, Water quality, Air quality, Coals, Farming and forestry, Soil quality. Pedology, Inorganic chemicals, Construction materials, Particle size analysis. Sieving, Veterinary medicine, Analytical chemistry, Sterilization and disinfection, Equipment for the chemical industry, Sugar. Sugar products. Starch, Beverages, Geology. Meteorology. Hydrology, Welding, brazing and soldering, Paints and varnishes, Textile fibres, Radiation protection, Radiation measurements, Paper and board, Kitchen equipment, Explosion protection, Medical sciences and health care facilities in general, Ceramics, Pesticides and other agrochemicals, Photography, Meat, meat products and other animal produce, Products of the textile industry, Test conditions and procedures in general, Wastes, Milk and milk products, Vocabularies, Fuels, Fertilizers, Environmental protection, Chipless working equipment, Road engineering, Products of the chemical industry, Fruits. Vegetables, Natural gas, Electrical and electronic testing, Plastics, Insulating fluids, Semiconducting materials, Materials for the reinforcement of composites, Railway rolling stock, Adhesives, Non-metalliferous minerals, Measurement of volume, mass, density, viscosity, Machine tools, Organic chemicals, General methods of tests and analysis for food products, Nuclear energy engineering, Footwear.


German Institute for Standardization, Method for Determination of Bacteria Concentration

  • DIN 58932-3:2023-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English / Note: Date of issue 2023-06-02*Intended as replacement for...
  • DIN 58932-6:2021-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English
  • DIN 58932-3:2017-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
  • DIN 58932-5:2007-10 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN 58940-7:1994 Medical microbiology - Methods for the determination of susceptibility of pathogens (except mycrobacteria) to antimicrobial agents - Part 7: Determination of the minimum bactericidal concentration (MBC) with the aid of microdilution
  • DIN 58932-6:2021 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English
  • DIN 58932-4:2003-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 4: Reference procedure for the determination of the concentration of leucocytes
  • DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
  • DIN 58940-6:1989 Medical microbiology; methods for the determination of susceptibility of pathogens (except mycobacteria) to antimicrobial agents; determination of MICs by agar dilution method
  • DIN EN ISO 21528-1:2017-09 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae (ISO 21528-1:2017); German version EN ISO 21528-1:2017
  • DIN 58932-3:1994 Haematology; determination of the concentration of blood corpuscles in blood; determination of the concentration of erythrocytes; reference method
  • DIN 58940-4:2002 Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 4: Evaluation classes of the minimum inhibitory concentration
  • DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
  • DIN 58932-2:1998-06 Haematology - Determination of the concentration of blood corpuscles in blood - Part 2: Characteristic quantities for erythrocytes (erythrocyte indices)
  • DIN VDE 0405-3:1995 Determination of breath alcohol concentration - Part 3: Test method
  • DIN EN 17042:2018-08 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration; German version EN 17042:2018
  • DIN EN 196-6:2019 Methods of testing cement - Part 6: Determination of fineness
  • DIN 58931:2021 Haematology - Determination of haemoglobin concentration in blood - Reference method; Text in German and English
  • DIN 58931:2021-09 Haematology - Determination of haemoglobin concentration in blood - Reference method; Text in German and English
  • DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
  • DIN EN 451-2:2017 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
  • DIN 58932-2:1998 Haematology - Determination of the concentration of blood corpuscles in blood - Part 2: Characteristic quantities for erythrocytes (erythrocyte indices)
  • DIN 58940-20 Bb.1:2004 Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 20: Coding of antimicrobial agents - Codes for antimicrobial agents
  • DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
  • DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
  • DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
  • DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
  • DIN EN ISO 9698:2015-12 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010); German version EN ISO 9698:2015 / Note: To be replaced by DIN EN ISO 9698 (2017-04).
  • DIN 58940-1:2002 Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 1: Terminology
  • DIN 10164-1:2019-06 Microbiological examination of meat and meat products - Determination of Enterobacteriaceae - Part 1: Spatula method (reference method)
  • DIN EN 14625:2022-11 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).
  • DIN EN 14625:2012-12 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012 / Note: To be replaced by DIN EN 14625 (2022-11).
  • DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
  • DIN 58940-6 Bb.1:1989 Medical microbiology; methods for the determination of susceptibility of pathogens (except mycobacteria) to antimicrobial agents; MICs of agents with control strains for the agar dilution method
  • DIN EN 14789:2017-05 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
  • DIN EN 15928:2010-12 Fertilizers - Determination of the fineness of grinding (dry procedure); German version EN 15928:2010
  • DIN EN ISO 11348-2:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007); English version of DIN EN ISO 11348-2:2009-05
  • DIN EN 196-6:2019-03 Methods of testing cement - Part 6: Determination of fineness; German version EN 196-6:2018
  • DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
  • DIN EN ISO 25139:2011-08 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011); German version EN ISO 25139:2011
  • DIN EN ISO 11348-3:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:2007); English version of DIN EN ISO 11348-3:2009-05
  • DIN CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
  • DIN 10122:2005 Analysis of foodstuffs - Enumeration of microorganisms by means of impedance-method - Determination of aerobic mesophile bacterial count

RU-GOST R, Method for Determination of Bacteria Concentration

  • GOST R 50068-1992 Pulps. Determination of stock concentration (Rapid method)
  • GOST 29184-1991 Food products. Methods for detection and quantity determination of family Enterobacteriaceae
  • GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
  • GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
  • GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
  • GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
  • GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
  • GOST 31973-2013 Paint materials. Method for determination of fineness of grind
  • GOST R 50280-1992 Natural wool. Methods of determination of the fineness
  • GOST 31659-2012 Food products. Methods for the detection of Salmonella spp
  • GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
  • GOST 18057-1988 Coarse fodder. Method for detection of microscopic fungi
  • GOST 24768-2000 Porcelain ware. Method for determination of whiteness
  • GOST 24768-1981 Porcelain ware. Method of whitness determination
  • GOST 310.2-1976 Cements. Methods of grinding fineness determination
  • GOST 24769-2000 Porcelain ware. Method for determination of transparency
  • GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
  • GOST 27318-1987 Agricultural animals. Methods of identification of non-typical microbacteria
  • GOST R 52753-2007 Paint materials. Method for determination of fineness of grind
  • GOST 29104.23-1991 Industrial fabrics. Method for determination of filtration fineness
  • GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
  • GOST 30305.4-1995 Dry dairy products. The procedure of measurement of solubility index
  • GOST 19413-1989 Drinking water. Method for determination of selenium mass concentration
  • GOST 23950-1988 Drinking water. Method for determination of strontium mass concentration
  • GOST 27709-1988 Canned condensed milk. The viscosity estimation method
  • GOST 29234.6-1991 Moulding sands. Methods for determination of water extract hydrodgen ions concentration (pH)
  • GOST 12787-1981 Methods for determination of spirit, actual extract and estimation of dry substances in the initial must
  • GOST R 51921-2002 Food products. Methods for detection and determination of Listeria monocytogenes bacteria
  • GOST R ISO 25139-2015 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
  • GOST R 53971-2010 Wine production. Determination of mass concentration of triazole pesticides by capillary electrophoresis method in combination with solid-phase extraction
  • GOST 27930-1988 Milk and milk products. Biological-calorimetric method for determination of the total bacteria number
  • GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
  • GOST R 56520-2015 Railway rolling stock. Methods for determination of explosive concentration of gases in storage boxes
  • GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
  • GOST R 53235-2008 Cotton fibre. Methods of determination of linear density and micronaire index
  • GOST R 50454-1992 Meat and meat products. Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli (Reference method)
  • GOST 19283-1993 Microtalc. Methods for determination of dispersion composition
  • GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
  • GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
  • GOST 30036.1-1993 Concentrated kaolin. Method for determination of dilute
  • GOST 30036.2-1993 Concentrated kaolin. Method for determination of adsorption index
  • GOST 30036.3-1993 Concentrated kaolin. Rapid method for determination of water absorbability
  • GOST R 56964-2016 Footwear and footwear components. Test methods to assess antibacterial activity
  • GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
  • GOST 26407-1984 Porcelain and faience ware. Method for determination of impact resistance
  • GOST 23453-2014 Milk. Methods for determination of somatic cells
  • GOST 6943.1-2015 Fibreglass. Yarns and rovings. Method for determination of linear density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Method for Determination of Bacteria Concentration

  • GB/T 13093-1991 Method for determination of aerobic bacterial count in feeds
  • GB 13093-1991 Method for determiantion of aerobic bacterial count in feeds
  • GB/T 6921-1986 Determination of the concentration of airborne particulate matters
  • GB/T 14643.6-2009 Examination of bacteria and algae in industrial circulating cooling water.Part 6:Examination of iron bacteria.MPN test
  • GB/T 12096-1989 Method for determination of fineness of starch
  • GB/T 28099-2011 Detection and identification of Xanthomonas oryzae pv.oryzicola(Fang et al.) Swings et al.
  • GB/T 5399-1985 Pulp--Determination of stock concentration--Rapid method
  • GB/T 16425-1996 Dctermination for minimum explosive concentration of dust cloud
  • GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
  • GB/T 15441-1995 Method by use of photobacteria for detecting the acute toxicity of water quality
  • GB/T 18856.2-2008 Test methods for coal water mixture.Part 2:Determination of mass percentage of solid
  • GB/T 18204.9-2000 Methods of microbiological examination for water in swimming pool-Determination of aerobic bacterial count
  • GB/T 7918.2-1987 Standard methods of microbiological examination for cosmetics--Standard plate count
  • GB 7918.2-1987 Cosmetic microbiology standard test method for determination of total bacterial count
  • GB/T 16147-1995 Scintillation flask method for measuring radon concentration in the air
  • GB/T 14643.6-1993 Industrial circulating cooling water examination of iron Bacteria--MPN test
  • GB/T 12143.5-1992 Method for determination of alcohol in concentrated fruit juices
  • GB/T 18204.1-2000 Methods of microbiological examination for air in public places-Determination of aerobic bacterial count
  • GB/T 23573-2009 Metal cutting machine tools.Determining method of dust concentration
  • GB/T 23574-2009 Metal cutting machines tools.Determination methods of oil mist concentration
  • GB/T 18856.2-2002 Test methods for quality of coal water mixture--Part 2: Determination of the solid load of coal water mixture
  • GB/T 11446.10-1997 Test method for total bacterial count in electronic grade water by membrane filters
  • GB/T 11446.10-2013 Test method for total bacterial count in electronic grade water by membrane filters
  • GB/T 11848.12-1999 Determination of boron in uranium ore concentrate by spectrophotometry

CH-SNV, Method for Determination of Bacteria Concentration

Standard Association of Australia (SAA), Method for Determination of Bacteria Concentration

  • AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
  • AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
  • AS 4215.0:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - General introduction and list of methods
  • AS/NZS 1301.207s:2007 Methods of test for pulp and paper - Determination of stock concentration
  • AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
  • AS 2891.9.3:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Mensuration method
  • AS 2891.7.1:2004 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Water displacement method
  • AS 2891.9.2:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Presaturation method

国家煤炭工业局, Method for Determination of Bacteria Concentration

  • MT/T 792-1998 Determination method of coal water slurry concentration

Institute of Environmental Sciences and Technology, Method for Determination of Bacteria Concentration

Indonesia Standards, Method for Determination of Bacteria Concentration

  • SNI 06-6438-2000 Test methods for ferro bacteria in water and in water performed sediment

American Society for Testing and Materials (ASTM), Method for Determination of Bacteria Concentration

  • ASTM D2088-73 Method for Determination of Low Concentrations of Lead in Paint
  • ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
  • ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
  • ASTM D4230-83(1996)e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
  • ASTM D6258-98(2003)e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6258-98e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM E267-90(1995) Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances
  • ASTM D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
  • ASTM D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
  • ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
  • ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
  • ASTM E1515-07 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
  • ASTM D6258-09 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM F838-05(2013) Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
  • ASTM F838-15a Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
  • ASTM E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • ASTM F838-83(1993) Standard Test Method for Determining Bacterial Retention Of Membrane Filters Utilized For Liquid Filtration
  • ASTM F838-15ae1 Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
  • ASTM F838-20 Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
  • ASTM F838-15 Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
  • ASTM C1625-19 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
  • ASTM D8516-23 Standard Test Method for Quantification of Culturable Waterborne Bacteria Using a Defined Culture Medium Coated Plate
  • ASTM C115-96a(2003) Standard Test Method for Fineness of Portland Cement by the Turbidimeter
  • ASTM C115/C115M-10e1 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
  • ASTM E2197-02 Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
  • ASTM E2250-02 Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids
  • ASTM E611-08(2015) Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM D3718-85a(1999) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(1999) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3624-85a(1999) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3624-85a(2022) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(2022) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3718-85A(2022)e1 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • ASTM D3624-85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(2015) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3718-85a(2015) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

Canadian General Standards Board (CGSB), Method for Determination of Bacteria Concentration

  • CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

Professional Standard - Traffic, Method for Determination of Bacteria Concentration

国家煤矿安全监察局, Method for Determination of Bacteria Concentration

  • MT 79-1984 Methods for determination of dust concentration and dispersion

Guangdong Provincial Standard of the People's Republic of China, Method for Determination of Bacteria Concentration

  • DB44/T 1651-2015 Detection and Identification Methods of Banana Bacterial Soft Rot

AT-ON, Method for Determination of Bacteria Concentration

  • ONORM EN 196-6-1992 Methods of testing cement - Determination of fineness
  • ONORM C 9435-3-1994 Testing of elastomers - Determination of resistance to ozone cracking - Determination of the concentration of ozone (Reference method)
  • ONR CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (CEN/TS 17638:2021)

RO-ASRO, Method for Determination of Bacteria Concentration

CZ-CSN, Method for Determination of Bacteria Concentration

Association Francaise de Normalisation, Method for Determination of Bacteria Concentration

  • NF EN 196-6:2018 Méthodes d'essai des ciments - Détermination de la finesse
  • NF U47-106:2004 Animal health analysis methods - In-vitro determination of the susceptibility of bacterial to antimicrobial agents using the agar dilution method.
  • NF T72-281:2014 Methods of airborne disinfection of surfaces - Determination of bactericidal, fongicidal, yeasticidal, mycobactericidal, tuberculicidal sporicidal and virucidal activity, including bacteriophages
  • NF P15-476:1990 Methods of testing cement. Determination of fininess.
  • NF EN ISO 11348-1/A1:2018 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 1 : méthode utilisant des bactéries fraîchement préparées - Amendement 1
  • NF EN ISO 11348-2:2009 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 2 : méthode utilisant des bactéries déshydratées
  • NF V08-039-1*NF EN ISO 21528-1:2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1 : Detection of Enterobacteriaceae
  • NF X43-356*NF EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography.
  • NF EN ISO 25139:2011 Émissions de sources fixes - Méthode manuelle pour la détermination de la concentration en méthane par chromatographie en phase gazeuse
  • NF EN ISO 11348-3:2009 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 3 : méthode utilisant des bactéries lyophilisées
  • NF EN ISO 11348-2/A1:2018 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 2 : méthode utilisant des bactéries déshydratées - Amendement 1
  • NF ISO 2370:2019 Textiles - Détermination de la finesse des fibres de lin - Méthodes perméamétriques
  • NF X43-336*NF EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
  • NF U42-467*NF EN 17042:2018 Fertilizers - Determination of boron in concentrations > or 10 % using acidimetric titration
  • NF EN ISO 11348-1:2009 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 1 : méthode utilisant des bactéries fraîchement préparées
  • NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
  • NF P15-471-6:2012 Methods of testing cements - Part 6 : determination of fineness.
  • FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
  • NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
  • NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
  • NF EN ISO 21877:2019 Émissions de sources fixes - Détermination de la concentration en masse de l'ammoniac - Méthode manuelle
  • NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
  • NF EN 14791:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes de soufre - Méthode de référence normalisée
  • NF P18-051-2*NF EN 451-2:2017 Method of testing fly ash - Part 2 : determination of fineness by wet sieving
  • NF M60-816*NF EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source
  • NF M60-815*NF EN ISO 9696:2017 Water quality - Gross alpha activity - Test method using thick source
  • XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
  • NF X43-370*NF EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method : Paramagnetism
  • NF EN 15928:2010 Engrais - Détermination de la finesse de mouture (procédé à sec)
  • NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
  • NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
  • NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
  • XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
  • NF T90-320-3*NF EN ISO 11348-3:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3 : method using freeze-dried bacteria
  • NF X43-311*NF EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method : non-dispersive infrared method.

Korean Agency for Technology and Standards (KATS), Method for Determination of Bacteria Concentration

  • KS I 3218-2003 Testing methods for detection and estimation ofmicro­biological contaminants in highly purified water
  • KS I ISO 10705-3:2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
  • KS I 3211-2016(2021) Testing methods for determining bacterial retention of membrane filters
  • KS D 0061-2005 Methods for measurement of dust concentration in welding environment
  • KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
  • KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
  • KS I 3211-2016 Testing methods for determining bacterial retention of membrane filters
  • KS P 1011-2019 Test method of the 2-D electrophoresis for recombinant bacteria
  • KS I ISO 10705-3:2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
  • KS I ISO 10705-3:2010 Water quality-Detection and enumeration of bacteriophages-Part 3:Validation of methods for concentration of bacteriophages from water
  • KS M 2105-1995 Methods of measuring dust concentration in flue gas
  • KS M 2105-2005(2010) Methods of measuring dust concentration in flue gas
  • KS I ISO 9698:2008 Water quality-Determination of tritium activity concentration-Liquid scintillation counting method
  • KS M 0105-1996
  • KS I ISO 25139-2013(2018) Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
  • KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
  • KS L 1621-2008 Fine ceramics-Test methods for bulk density of fine ceramic powder
  • KS A 4513-1980(1995) MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
  • KS D 0078-2008 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
  • KS L 5106-1995 Testing method for fineness of portland cement by air permeability apparatus
  • KS I ISO 12141:2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS B 0546-2021 Methods of measurement for gas concentration in welding environment
  • KS I ISO 25140-2012(2017) Stationary source emissions-Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS I ISO 25139:2013 Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
  • KS I ISO 6768-2014(2019) Ambient air — Determination of mass concentration of nitrogen dioxide(Modified Griess-Saltzman method)
  • KS L 5112-2022 Test method for fineness of hydraulic cement by the 45 mm sieve
  • KS B ISO 7935:2009 Stationary source emissions-Determination of the mass concentration of sulfulr dioxide-Performance characteristics of automated measuring methods
  • KS I ISO 7935:2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
  • KS B ISO 7935-2003(2008) Stationary source emissions-Determination of the mass concentration of sulfulr dioxide-Performance characteristics of automated measuring methods
  • KS I ISO 7935-2006(2016) Stationary source emissions-Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
  • KS I ISO 11348-3:2009 Water quality-Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri(Luminescent bacteria test)-Part 3:Method using freeze-dried bacteria
  • KS I ISO 7935:2006 Stationary source emissions-Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
  • KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS D 0061-2021 Methods for measurement of dust concentration in welding environment
  • KS D 0078-2008(2018) Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy

KR-KS, Method for Determination of Bacteria Concentration

  • KS I ISO 10705-3-2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
  • KS I ISO 10705-3-2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
  • KS I ISO 11348-3-2009 Water quality-Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri(Luminescent bacteria test)-Part 3:Method using freeze-dried bacteria
  • KS I ISO 12141-2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS I ISO 11348-1-2009 Water quality-Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri(Luminescent bacteria test)-Part 1:Method using freshly prepared bacteria
  • KS I ISO 7935-2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
  • KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS I ISO 13641-2-2010 Water quality-Determination of inhibition of gas production of anaerobic bacteria-Part 2:Test for low biomass concentrations

Japanese Industrial Standards Committee (JISC), Method for Determination of Bacteria Concentration

  • JIS K 3835:1990 Testing methods for determining bacterial retention of membrane filters
  • JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
  • JIS Z 4513:1977 Measuring methods of beta radioactivity concentration of drain water
  • JIS A 1306:2014 Measuring method of smoke density using light extinction method
  • JIS K 0350-10-10:2002 Testing methods for standard plate counts of heterotrophic bacteria in industrial water and wastewater
  • JIS A 1306:1983 Measuring method of smoke density using light extinction method
  • JIS Z 8808:2013 Methods of measuring dust concentration in flue gas
  • JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
  • JIS K 3835 AMD 1:2006 Testing methods for determining bacterial retention of membrane filters (Amendment 1)
  • JIS K 3823:2012 Testing methods for determining bacterial rejection of ultrafiltration modules
  • JIS K 3823:1990 Testing methods for determining bacterial rejection of ultrafiltration modules
  • JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
  • JIS K 0350-90-10:2005 Testing method for detection of sulfur bacteria in industrial water
  • JIS K 0350-80-10:2005 Testing method for detection of iron bacteria in industrial water
  • JIS K 7228:1987 Method for measuring smoke density and concentration of gases evolved by incineration or decomposition of plastics
  • JIS B 9920:1989 Measuring methods for airborne particles in clean room and evaluating methods for air cleanliness of clean room
  • JIS Z 8852:2013 Methods of continuous measurement for dust concentration in flue gas
  • JIS Z 3952:2005 Methods of measurement for gas concentration in welding environment
  • JIS A 1306 AMD 1:2008 Measuring method of smoke density using light extinction method (Amendment 1)
  • JIS H 0615:2021 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
  • JIS K 3824:1990 Testing methods for endotoxin rejection of ultrafiltration modules
  • JIS K 0350-70-10:2005 Testing method for detection of Sphaerotilus in industrial water
  • JIS K 3824:2012 Testing methods for determining endotoxin rejection of ultrafiltration modules
  • JIS H 0615:1996 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
  • JIS K 3823 AMD 1:2006 Testing methods for determining bacterial rejection of ultrafiltration modules (Amendment 1)
  • JIS Z 3950:2021 Methods of measurement for airborne dust concentration in welding environment
  • JIS Z 3950:2005 Methods of measurement for airborne dust concentration in welding environment
  • JIS R 1608:2003 Testing methods for compressive strength of fine ceramics

Professional Standard - Agriculture, Method for Determination of Bacteria Concentration

  • NY/T 76-1988 Method for the determination of fiber fineness of wool
  • NY/T 2287-2012 Detection and identification for Xanthomonas oryzae pv.oryzicola(Fang et al.)Swings et al.
  • GB/T 2383-1980 Method for determination of sieve fineness of dyestuffs
  • 水和废水监测分析方法 5.2.4-2003 Chapter 5 Water and Wastewater Biological Monitoring Methods Chapter 2 Bacteriological Determination in Water 4 Determination of Total Bacteria in Water (B)
  • GB 3776.2-1983 Method for Determination of Hydrogen Ion Concentration of Pesticide Emulsifier
  • NY/T 1538-2007 Quick test method for determination of fineness of ramie fiber
  • 水和废水监测分析方法 5.2.8-2003 Chapter Five Water and Wastewater Biological Monitoring Methods Chapter Two Bacteriological Determination in Water Eight Determination of Faecal Streptococcus in Water (B)
  • 水和废水监测分析方法 5.2.5-2003 Chapter Five Water and Wastewater Biological Monitoring Methods Chapter Two Bacteriological Determination in Water Five Determination of Total Coliform Bacteria in Water (B)
  • 水和废水监测分析方法 5.2.7-2003 Chapter 5 Water and Wastewater Biological Monitoring Methods Chapter 2 Bacteriological Determination in Water 7 Determination of Salmonella in Water (B)
  • 水和废水监测分析方法 5.2.9-2003 Chapter 5 Biomonitoring Methods of Water and Wastewater Chapter 2 Bacteriological Determination in Water 9. Rapid Determination of Total Coliforms in Water and Fecal Coliforms (C)

中华人民共和国国家卫生和计划生育委员会, Method for Determination of Bacteria Concentration

  • GBZ/T 155-2002 Scintillation flask method for measuring radon concentration in the air
  • WS/T 222-2002 Guideline for the measurement of catalytic concentration of clinical enzymes
  • WS/T 349-2011 Reference method for determination of α-amylase catalytic activity concentration

Professional Standard - Ocean, Method for Determination of Bacteria Concentration

  • HY/T 176-2014 Determination of iron bacteria in seawater.MPN method

TR-TSE, Method for Determination of Bacteria Concentration

  • TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER

VN-TCVN, Method for Determination of Bacteria Concentration

  • TCVN 4030-2003 Cement.Test method for determination of fineness
  • TCVN 2371-1987 Raw silk.Method for determination of fineness
  • TCVN 1535-1993 Animal mixed feeding stuffs.Methods for determination of fineness
  • TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
  • TCVN 6830-2016 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
  • TCVN 6831-3-2010 Water quality.Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test).Part 3: Method using freeze-dried bacteria

Professional Standard - Chemical Industry, Method for Determination of Bacteria Concentration

  • HG 2-896-1976 Determination method of fineness of pesticide powder

British Standards Institution (BSI), Method for Determination of Bacteria Concentration

  • BS EN 196-6:1992 Methods of testing cement - Determination of fineness
  • BS EN ISO 21528-1:2017 Microbiology of the food chain. Horizontal method for the detection and enumeration of Enterobacteriaceae - Detection of Enterobacteriaceae
  • BS EN ISO 11348-3:2008+A1:2018 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using freeze-dried bacteria
  • BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
  • BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
  • BS ISO 10705-3:2003 Water quality. Detection and enumeration of bacteriophages. Validation of methods for concentration of bacteriophages from water
  • BS EN 196-6:2010 Methods of testing cement - Determination of fineness
  • BS EN ISO 11348-1:2008+A1:2018 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using freshly prepared bacteria
  • BS EN ISO 11348-2:2008+A1:2018 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using liquid-dried bacteria
  • BS EN 451-2:1995 Method of testing fly ash - Determination of fineness by wet sieving
  • BS 1747-2:1969 Methods for the measurement of air pollution - Determination of concentration of suspended matter
  • BS ISO 10932:2010 Milk and milk products - Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
  • BS EN 17042:2018 Fertilizers. Determination of boron in concentrations > 10 % using acidimetric titration
  • BS ISO 13641-2:2003 Water quality. Determination of inhibition of gas production of anaerobic bacteria. Test for low biomass concentrations
  • BS EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • BS EN ISO 25139:2011 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
  • BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
  • BS EN 196-6:2018 Tracked Changes. Methods of testing cement. Determination of fineness
  • BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
  • BS 2043:1968 Method for the determination of wool fibre fineness by the use of a projection microscope
  • BS EN ISO 11348-1:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria
  • BS 4522:1988 Method for determination of absolute density at 20 °C of liquid chemical products for industrial use
  • BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
  • BS EN 451-2:2017 Tracked Changes. Method of testing fly ash. Determination of fineness by wet sieving
  • BS 6068-4.13:2000 Water quality. Microbiological methods. Detection and enumeration of bacteriophages. Enumeration of somatic coliphages
  • BS EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
  • BS ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method

SE-SIS, Method for Determination of Bacteria Concentration

未注明发布机构, Method for Determination of Bacteria Concentration

  • NF P15-471-6*NF EN 196-6:2018 Methods of testing cement - Determination of fineness
  • DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
  • DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration

ES-UNE, Method for Determination of Bacteria Concentration

  • UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
  • UNE-EN ISO 21528-1:2018 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae (ISO 21528-1:2017)
  • UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
  • UNE-EN ISO 11348-3:2009/A1:2019 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria - Amendment 1 (ISO 11348-3:2007/Amd 1:2018)
  • UNE-EN 196-6:2019 Methods of testing cement - Part 6: Determination of fineness
  • UNE-ISO 10705-3:2021 Water quality. Detection and enumeration of bacteriophages. Part 3: Validation of methods for concentration of bacteriophages from water
  • UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • UNE-EN ISO 11348-2:2009/A1:2019 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria - Amendment 1 (ISO 11348-2:2007/Amd 1:2018)
  • UNE-EN ISO 11348-1:2009/A1:2019 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria - Amendment 1 (ISO 11348-1:2007/Amd 1:2018)
  • UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

European Committee for Standardization (CEN), Method for Determination of Bacteria Concentration

  • EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
  • PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
  • EN 451-2:2017 Method of testing f ly ash - Part 2: Determination of fineness by wet sieving
  • EN 451-2-2017E Method of testing f ly ash - Part 2: Determination of fineness by wet sieving
  • EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
  • EN 451-2:1994 Method of Testing Fly Ash - Part 2: Determination of Fineness by Wet Sieving
  • EN ISO 11348-2:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007)
  • EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
  • EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
  • EN ISO 11348-1:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007)
  • EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
  • CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • EN ISO 11348-3:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:2007)
  • EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)
  • EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
  • prEN 237-1985 Liquid petroleum products; determination of low lead concentrations; atomic absorption spectrometric methode

International Organization for Standardization (ISO), Method for Determination of Bacteria Concentration

  • ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
  • ISO 10705-3:2003 Water quality - Detection and enumeration of bacteriophages - Part 3: Validation of methods for concentration of bacteriophages from water
  • ISO 9698:2010 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
  • ISO 4119:1978 Pulps; Determination of stock concentration (Rapid method)
  • ISO 10932:2010 | IDF 223:2010 Milk and milk products — Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
  • ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • ISO 10932:2010 Milk and milk products - Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
  • ISO 10932:2010|IDF 223:2010 Minimum inhibitory concentration (MIC) determination of antibiotics suitable for bifidobacteria and non-enterococcal lactic acid bacteria (LAB) in milk and dairy products
  • ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
  • ISO 11348-1:2007/Amd 1:2018 Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 1: Method using freshly prepared bacteria — Amendmen
  • ISO 11348-3:2007/Amd 1:2018 Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 3: Method using freeze-dried bacteria — Amendment 1
  • ISO 11348-2:2007/Amd 1:2018 Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 2: Method using liquid-dried bacteria — Amendment 1
  • ISO 11348-2:1998 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria
  • ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • ISO 11348-3:2007 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria
  • ISO 11348-3:1998 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria
  • ISO 7935:1992 Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods
  • ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method

国家市场监督管理总局、中国国家标准化管理委员会, Method for Determination of Bacteria Concentration

  • GB/T 16425-2018 Determination for minimum explosive concentration of dust clouds
  • GB/T 38301-2019 Determination of limiting oxygen concentration (LOC) of flammable gases and vapours

NL-NEN, Method for Determination of Bacteria Concentration

  • NEN 6874-1988 Milk and milk products Determination of coliform bacteria content by the colony count technique
  • NEN-EN 196-6-1993 Methods of testing cement. Determination of fineness

IT-UNI, Method for Determination of Bacteria Concentration

  • UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

Lithuanian Standards Office , Method for Determination of Bacteria Concentration

  • LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • LST EN 196-6-2010 Methods of testing cement - Part 6: Determination of fineness
  • LST EN 14789-2006 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
  • LST EN ISO 11348-3:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:2007)
  • LST EN 451-2-2000 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
  • LST EN ISO 11348-2:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007)
  • LST EN ISO 11348-1:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007)
  • LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • LST EN 15928-2010 Fertilizers - Determination of the fineness of grinding (dry procedure)
  • LST ISO 7935:2001 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
  • LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • LST EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

Hebei Provincial Standard of the People's Republic of China, Method for Determination of Bacteria Concentration

  • DB13/T 1234-2010 Fineness Determination Method of Chemical Products Sieve Analysis Method
  • DB13/T 2589-2017 Infrared Spectrophotometric Method for Determination of Industrial Fume Concentration
  • DB13/T 5026.2-2019 Determination of physical properties of graphene conductive paste Part 2: Determination of paste fineness by scraper fineness meter method

BE-NBN, Method for Determination of Bacteria Concentration

Professional Standard - Commodity Inspection, Method for Determination of Bacteria Concentration

  • SN/T 2372-2009 Identification of Xanthomonas oryzae pv. Oryzae、Xanthomonas oryzae pv. Oryzicola
  • SN/T 0480.2-1995 Method of analysis baryte for export.Determination of fineness

Military Standard of the People's Republic of China-General Armament Department, Method for Determination of Bacteria Concentration

  • GJB 8342-2015 Method for determination of aerosol concentration and dispersion in field smoke screens

CEN - European Committee for Standardization, Method for Determination of Bacteria Concentration

  • PREN 17042-2016 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
  • EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting

Group Standards of the People's Republic of China, Method for Determination of Bacteria Concentration

  • T/BSPT 003-2018 Performance test method for fine particulate matter (PM2.5 )mass concentration measurement instruments based on light scattering principle
  • T/JPMA 003-2019 Multiplex PCR assay for the detection of 11 pathogenic bacteria in bacterial diarrheal diseases
  • T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter (PM2.5)mass concentration measurement instruments based on light scattering principle
  • T/SATA 054-2023 Etermination of ethanol concentration in wine - Near infrared spectroscopy method

Danish Standards Foundation, Method for Determination of Bacteria Concentration

  • DS/EN ISO 11348-3:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria
  • DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
  • DS/EN ISO 11348-1:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria
  • DS/EN ISO 11348-2:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria
  • DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
  • DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
  • DS/EN 196-6:1994 Methods of testing cement-Part 6:Determination of fineness
  • DS/EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
  • DS/EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
  • DS/EN 451-2:1996 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
  • DS/ISO 10705-3:2004 Water quality - Detection and enumeration of bacteriophages - Part 3: Validation of methods for concentration of bacteriophages from water
  • DS/ISO 9698:2011 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
  • DS/EN 15928:2010 Fertilizers - Determination of the fineness of grinding (dry procedure)
  • DS/ISO 7935:1996 Stationary source emissions - Determination of the mass concentration of sulfur dioxide - Performance characteristics of automated measuring methods
  • DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)

Professional Standard - Environmental Protection, Method for Determination of Bacteria Concentration

  • HJ 1000-2018 Determination of Total Bacteria in Water Quality by Plate Counting Method

PL-PKN, Method for Determination of Bacteria Concentration

  • PN-EN 17042-2018-07 P Fertilizers--Determination of boron in concentrations > 10 % using acidimetric titration
  • PN-EN 196-6-2019-01 P Methods of testing cement -- Part 6: Determination of fineness
  • PN-ISO 10705-3-2021-01 P Water quality -- Detection and enumeration of bacteriophages -- Part 3: Validation of methods for concentration of bacteriophages from water
  • PN Z04111-03-1989 Air purity protection "Microbiological testings Determination number of the fungi in the atmospheric air (imision) wiht sampling by aspiration and sedimentation method
  • PN BN 7469-10-1966 Printing inks Methods of testing Determination of fineness of grind
  • PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

Heilongjiang Provincial Standard of the People's Republic of China, Method for Determination of Bacteria Concentration

  • DB23/T 2750-2020 Determination of biological toxicity in water quality Rapid determination method of luminescent bacteria

AENOR, Method for Determination of Bacteria Concentration

  • UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
  • UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
  • UNE 80108:2010 Test Methods of cement: Physical analysis. Fineness determination by wet sieving.
  • UNE-EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
  • UNE-EN ISO 11348-3:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:2007)
  • UNE-EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
  • UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
  • UNE-EN ISO 11348-2:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007)
  • UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
  • UNE-EN ISO 11348-1:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007)
  • UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
  • UNE-EN 15928:2011 Fertilizers - Determination of the fineness of grinding (dry procedure)
  • UNE 77222:1996 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF SULFUR DIOXIDE. PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING METHODS.
  • UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • UNE-EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

IN-BIS, Method for Determination of Bacteria Concentration

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Method for Determination of Bacteria Concentration

  • GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
  • GB/T 34536-2017 Natural gas—Determination of radon concentration—Scintillation flash method

National Health Commission of the People's Republic of China, Method for Determination of Bacteria Concentration

  • WST 349:2011 Reference method for determination of α-amylase catalytic activity concentration
  • WST 361:2011 Reference method for determination of catalytic activity concentration of lactate dehydrogenase

ZA-SANS, Method for Determination of Bacteria Concentration

  • SANS 12353:2008 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, mycobactericidal, sporicidal and fungicidal activity
  • SANS 50196-6:1989 Methods of testing cement Part 6: Determination of fineness

CU-NC, Method for Determination of Bacteria Concentration

  • NC 44-08-4-1986 Ores. Cobalt and Nickel Sulfide Concentrate. Photometric Deterraination of Copper. "Neocuproina" Method
  • NC 57-98-4-1986 Clinical Methods and Ais Photometric Determination of Thymol Turbidness in Human Serum. Chemical Analysis Method

Shandong Provincial Standard of the People's Republic of China, Method for Determination of Bacteria Concentration

  • DB37/T 4298-2020 Rapid Detection Method of Green Tide Secondary Toxicity Luminescence Bacteria Method

Professional Standard - Coal, Method for Determination of Bacteria Concentration

  • MT/T 836-1999 Method of determining the minimum explosion concentration for methane and coal dust mixtures

Professional Standard - Hygiene , Method for Determination of Bacteria Concentration

  • WS/T 361-2011 Reference procedure for the measurement of catalytic activity concentration of lactate dehydrogenase
  • WS/T 351-2011 Reference procedure for the measurement of catalytical activity concentration of alkaline phosphatase(ALP)

SG-SPRING SG, Method for Determination of Bacteria Concentration

  • SS 397 Pt.6-1997 METHODS OF TESTING CEMENT-PART 6:DETERMINA TION OF FINENESS AMENDMENT NO. 1

Professional Standard - Nuclear Industry, Method for Determination of Bacteria Concentration

  • EJ/T 1075-1998 Determination of gross alpha activity in water thick source method

劳动部, Method for Determination of Bacteria Concentration

  • LD 98-1996 Light scattering method for determination of dust concentration in air

BELST, Method for Determination of Bacteria Concentration

  • STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids

Association of German Mechanical Engineers, Method for Determination of Bacteria Concentration

  • VDI 3486 Blatt 2-1979 Measurement of gaseous emission; Measurement of the hydrogen sulfide concentration; lodometric titration method

The American Road & Transportation Builders Association, Method for Determination of Bacteria Concentration

  • AASHTO T 202-2003 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer

American National Standards Institute (ANSI), Method for Determination of Bacteria Concentration

National Metrological Technical Specifications of the People's Republic of China, Method for Determination of Bacteria Concentration





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved