ZH
RU
ES

Flow measurement using electronic metering systems Electronic gas measurement

Flow measurement using electronic metering systems Electronic gas measurement, Total:282 items.

In the international standard classification, Flow measurement using electronic metering systems Electronic gas measurement involves: Radiation measurements, Measurement of fluid flow, Linear and angular measurements, Metrology and measurement in general, Environmental protection, Air quality, Environmental testing, Electrical engineering in general, Radiocommunications, Optics and optical measurements, Thermodynamics and temperature measurements, Fluid power systems, Measurement of force, weight and pressure, Analytical chemistry, Fuels, Industrial automation systems, Internal combustion engines for road vehicles, Electricity. Magnetism. Electrical and magnetic measurements, Electrical and electronic testing, Electromechanical components for electronic and telecommunications equipment, Measurement of volume, mass, density, viscosity, Installations in buildings, Software development and system documentation, Fibre optic communications, Components and accessories for telecommunications equipment, Insulation, Electronic components in general, Semiconducting materials, Galvanic cells and batteries, Non-destructive testing, Services, Equipment for the chemical industry, Applications of information technology, Construction industry, Buildings, Electronic display devices, Audio, video and audiovisual engineering, Power transmission and distribution networks, Nuclear energy engineering, Quality, Acoustics and acoustic measurements, Construction technology, Optoelectronics. Laser equipment, Electronic tubes, Medical equipment, Solar energy engineering, Electrical accessories, Electric traction equipment, Railway rolling stock, Electronic component assemblies, Natural gas, Water quality.

API - American Petroleum Institute, Flow measurement using electronic metering systems Electronic gas measurement

API MPMS 21.1-2013 Manual of Petroleum Measurement Standards Chapter 21.1 - Flow Measurement Using Electronic Metering Systems - Electronic Gas Measurement (Second Edition)
API MPMS 21.1-1993 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement (First Edition)
API MPMS 21.2 ADD-2000 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems Addendum to Section 2-Flow Measurement Using Electronic Metering Systems@ Inferred Mass (First Edition)
API MPMS 21.2-1998 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems - Section 2-Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters (First Edition)

American National Standards Institute （ANSI), Flow measurement using electronic metering systems Electronic gas measurement

ANSI/ASTM E1631:2010 Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ANSI/TIA/EIA 5430000-1989 Generic Specification for Field Portable Electronic Instruments for Optical Fiber System Measurements
ANSI/ASTM D7148:2013 Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

Danish Standards Foundation, Flow measurement using electronic metering systems Electronic gas measurement

DS/EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DS/IEC 60107-3/A1:2000 Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems
DS/EN 60835-2-10:1995 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section ten: Overall system performance
DS/EN 61193-2:2008 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
DS/IEC 60107-4/A1:2000 Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system
DS/EN 61674/A1:2002 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
DS/EN 61674:2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging

American Society for Testing and Materials (ASTM), Flow measurement using electronic metering systems Electronic gas measurement

ASTM ISO/ASTM51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM51631-13 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM 51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM ISO/ASTM 51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM ISO/ASTM 51631-13 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM 51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM ISO/ASTM 51607-13 Standard Practice for Use of the Alanine-EPR Dosimetry System
ASTM E341-96(2002) Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
ASTM E341-96 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
ASTM E341-08 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
ASTM E341-08(2015) Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E668-05 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM E668-13 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM D7148-07 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM D7148-07(2011) Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E385-90(2002) Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
ASTM B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM E385-07 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
ASTM B794-97(2020) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM B794-97(2015) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
ASTM D7148-19 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM D7148-19a Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM D5673-15 Standard Test Method for Elements in Water by Inductively Coupled Plasma&x2014;Mass Spectrometry
ASTM D5673-16 Standard Test Method for Elements in Water by Inductively Coupled Plasma&x2014;Mass Spectrometry
ASTM E668-20 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices

International Organization for Standardization (ISO), Flow measurement using electronic metering systems Electronic gas measurement

ISO/ASTM 51631:2002 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51631:2003 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
ISO/ASTM 51631:2020 Practice for use of calorimetric dosimetry systems for dose measurements and dosimetry system calibration in electron beams
ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51607:2013 Practice for use of the alanine-EPR dosimetry system
ISO 16183:2002 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
ISO 6358-3:2014 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 3: Method for calculating steady-state flow-rate characteristics of systems
ISO 8322-8:1992 Building construction; measuring instruments; procedures for determining accuracy in use; part 8: electronic distance-measuring instruments up to 150 m
ISO 18175:2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

British Standards Institution (BSI), Flow measurement using electronic metering systems Electronic gas measurement

BS ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS ISO 15568:1999 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
12/30251709 DC BS ISO/ASTM 51631. Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
BS EN 60510-2-5:1996 Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency modulators
BS EN 60510-2-6:1996 Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency demodulators
BS EN 60510-3-4:1996 Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systems. Measurements for frequency division multiplex (f.d.m.) transmission
BS EN 12470-4:2000+A1:2009 Clinical thermometers — Part 4: Performance of electrical thermometers for continuous measurement
BS IEC 62014-5:2015 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
BS EN 60835-2-5:1995 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Digital signal processing sub-system
BS ISO 16183:2003 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
BS EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test
BS ISO 6358-3:2014 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Method for calculating steady-state flow-rate characteristics of systems
BS IEC 61508-7:2000 Functional safety of electrical/electronic/programmable electronic safety-related systems. Overview of techniques and measures
18/30371151 DC BS ISO 28057. Clinical dosimetry. Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Climatic tests - Flowing single gas corrosion test
BS EN 60835-2-10:1993 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Overall system performance
BS ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
BS EN 60835-3-12:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Overall system performance
BS EN 62337:2007 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones
BS EN 62337:2012 Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
BS EN 61966-5:2001 Multimedia systems and equipment - Colour measurement and management - Equipment using plasma display panels
BS EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Performance measuring and monitoring devices (PMD)
BS CECC 00016:1991 Harmonized system of quality assessment for electronic components - Basic specification: basic requirements for the use of statistical process control (SPC) in the CECC system
BS 5944-2:1992 Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for motors
BS EN IEC 61557-12:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Power metering and monitoring devices (PMD)
BS EN IEC 61557-12:2022+A1:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Power metering and monitoring devices (PMD)
15/30328086 DC BS EN 61557-12. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 12. Power metering and monitoring devices (PMD)
BS EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d c. Equipment for testing, measuring or monitoring of protective measures. Combined measuring equipment for testing, measuring or monitoring of protective measures
BS 5944-6:1992 Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for pumps using a parallelepiped microphone array

American Petroleum Institute (API), Flow measurement using electronic metering systems Electronic gas measurement

API RP 85-2003 add 2013 Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems
API RP 85-2003(2013) Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems

未注明发布机构, Flow measurement using electronic metering systems Electronic gas measurement

BS ISO 15568:1998(2000) Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
BS ISO TS 15768:2000 Measurement of liquid velocity in open channels - Design , selection and use of electromagnetic current meters

Lithuanian Standards Office , Flow measurement using electronic metering systems Electronic gas measurement

LST EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007)
LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
LST HD 467.1.2 S1-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section 2: Measurements in the r.f. range (IEC 60510-1-2:1984)
LST HD 477.1 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 1: Measurements common to sub-systems and simulated radio-relay systems (IEC 60487-1:1984)
LST HD 477.2.1 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 1: General (IEC 60487-2-1:1981)
LST HD 477.2.5 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 5: Frequency demodulators (IEC 60487-2-5:1984)
LST HD 477.2.4 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 4: Frequency modulators (IEC 60487-2-4:1984)
LST EN 60510-3-4-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section 4: Measurement for frequency division multiplex (f.d.m.) transmission (IEC 60510-3-4:1992)
LST HD 477.2.2 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 2: Stand-by channel switching equipment (IEC 60487-2-2:1981)
LST EN 60835-2-5-2002 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 2: Measurements on terrestrial radio-relay systems. Section 5: Digital signal processing sub-system (IEC 60835-2- 5:1993)
LST HD 477.2.6 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 6: Diversity, twin-path and hot stand-by equipment (IEC 60487-2-6:1984)
LST EN 60510-2-6-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section 6: Frequency demodulators (IEC 60510-2-6:1992)
LST EN 60510-2-5-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section 5: Frequency modulators (IEC 60510-2-5:1992)
LST HD 467.2.3 S1-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section 3: Low-noise amplifier (IEC 60510-2-3:1989)
LST EN 61674-2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging

AENOR, Flow measurement using electronic metering systems Electronic gas measurement

UNE-EN ISO 748:2009 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007)
UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
UNE 20711-1:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 1: MEASUREMENTS COMMON TO SUB-SYSTEMS AND SIMULATED RADIO-RELAY SYSTEMS.
UNE 20711-2-1:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION ONE: GENERAL.
UNE 20711-2-4:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION FOUR: FREQUENCY MODULATORS.
UNE 20711-2-5:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION FIVE: FREQUENCY DEMODULATORS.
UNE 20711-2-2:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION TWO: STAND-BY CHANNEL SWITCHING EQUIPMENT.
UNE 20712-2-3:1993 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN SATELITE EARTH STATIONS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION THREE: LOW-NOISE AMPLIFIER.
UNE 20711-2-6:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION SIX: DIVERSITY, TWIN-PATH AND HOT STAND-BY EQUIPMENT.

Association Francaise de Normalisation, Flow measurement using electronic metering systems Electronic gas measurement

NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
NF EN IEC 61280-1-4:2023 Procédures d'essai des sous-systèmes de télécommunication fibroniques - Partie 1-4 : sous-systèmes généraux de télécommunication - Méthode de mesure du flux inscrit de la source optique
NF E49-160-3*NF ISO 6358-3:2015 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fmuids - Part 3 : method for calculating steady-state flow-rate characteristics of systems
NF EN ISO 28057:2021 Dosimétrie clinique - Dosimétrie avec détecteurs thermoluminescents solides pour les rayonnements de photons et d'électrons en radiothérapie
NF EN IEC 61280-2-8:2021 Procédures d'essai des sous-systèmes de télécommunications fibroniques - Partie 2-8 : systèmes numériques - Détermination de faibles valeurs de BER en utilisant des mesures du facteur Q
NF C42-198-10:2001 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10 : combined measuring equipment for testing, measuring or monitoring of protective mea
NF C42-198-10*NF EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10 : combined measuring equipment for testing, measuring and monitoring of protective
NF C42-198-8:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8 : insulation monitoring devices for IT systems.
NF C42-198-8*NF EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8 : insulation monitoring devices for IT systems
NF EN ISO 20714:2021 E-liquide - Détermination de la teneur en nicotine, propylène glycol et glycérol dans les liquides utilisés avec les systèmes électroniques de délivrance de nicotine - Méthode par chromatographie en phase gazeuse
NF C42-198-8:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 8 : insulation monitoring devices for IT systems.
NF EN 60512-11-7:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-7 : essais climatiques - Essai 11g : essai de corrosion dans un flux de mélange de gaz
NF C42-198-7:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 7 : phase sequence.
NF C42-198-2:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 2 : insulation resistance.
NF C42-198-5:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 5 : resistance to earth.
NF EN ISO 6551:1996 Liquides et gaz de pétrole - Fidélité et sécurité des mesures dynamiques - Systèmes de transmission par câbles de données, sous forme d'impulsions électriques et/ou électroniques.
NF C42-198-3:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 3 : loop impedance.
NF C42-198-1:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 1 : general requirements.
NF C42-198-12*NF EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12 : performance measuring and monitoring devices (PMD)
NF C42-198-9:2009 Electrical safety in low voltage distribution systems up to 1 000 V ac and 1 500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems.
NF C42-198-9*NF EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems
NF EN IEC 61280-1-3:2021 Procédures d'essai des sous-systèmes de télécommunication fibroniques - Partie 1-3 : sous-systèmes généraux de télécommunication - Mesure de la longueur d'onde centrale, de la largeur spectrale et des caractéristiques spectrales supplément...
NF C42-198-4:1997 Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 4 : resistance of earth connection and equipotential bonding.
NF EN 50402:2017 Matériel électrique pour la détection et la mesure des gaz ou vapeurs combustibles ou toxiques ou de l'oxygène - Exigences relatives à la sécurité fonctionnelle des systèmes de détection de gaz

German Institute for Standardization, Flow measurement using electronic metering systems Electronic gas measurement

DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DIN EN ISO 28057:2021-06 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019); German version EN ISO 28057:2021
DIN 50440:1998 Testing of materials for semiconductor technology - Measurement of carrier lifetime in silicon single crystals - Recombination carrier lifetime at low injection by photoconductivity method
DIN IEC 60487-1:1990 Methods of measurement for equipment used in terrestrial radio-relay systems; measurements common to sub-systems and simulated radio-relay systems; identical with IEC 60487-1:1984
DIN IEC 60510-2-3:1993-06 Methods of measurement for radio equipment used in satellite earth-stations; measurement for sub-systems; low-noise amplifier; identical with IEC 60510-2-3:1989
DIN IEC 60487-2-1:1987-09 Methods of measurement for equipment used in terrestrial radio-relay system; measurements for sub-systems; general; identique with IEC 487-2-1, edition 1981
DIN EN 62337:2007 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones (IEC 62337:2006); German version EN 62337:2007
DIN EN 60510-3-4:1994-09 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on combinations of sub-systems; section 4: Measurements for frequency division multiplex (f.d.m.) transmission (IEC 60510-3-4:1992); German ver...
DIN IEC 60510-3-2:1987-04 Methods of measurement for radio equipment used in satellite earth stations; methods of measurement for combinations of sub-systems; measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range; identical with IEC 60510-...
DIN IEC 60510-3-1:1987-09 Methods of measurement for radio equipment used in satellite earth stations; methods of measurement for combinations of sub-systems; general; identical with IEC 60510-3-1, edition 1981
DIN EN 60510-2-5:1994-09 Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems; section 5: Frequency modulators (IEC 60510-2-5:1992); German version EN 60510-2-5:1994
DIN EN 60510-2-6:1994-09 Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems; section 5: Frequency demodulators (IEC 60510-2-6:1992); German version EN 60510-2-6:1994
DIN 44402 Bb.1:1986 Measurement of the electrical properties of electronic tubes; IEC-standards, DIN-standards (including microwave tubes and photosensitive devices; pin-base, concepts, CECC-system)
DIN IEC 60487-2-4:1988-08 Methods of measurement for equipment used in terrestrial radio-relay systems; measurements for sub-systems; frequency modulators; identical with IEC 60487-2-4, edition 1984
DIN 6855-4:2004 Quality control of nuclear medicine instruments - Part 4: Constancy testing of positron emission tomographs (PET)
DIN IEC 60487-2-2:1987-03 Methods of measurement for equipment used in terrestrial radio-relay systems; measurements for sub-systems; stand-by channel switching equipment; identical with IEC 60487-2-2, edition 1981
DIN EN 60835-2-5:1995-04 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurement on terrestrial radio relay-systems - Section 5: Digital signal processing sub-system (IEC 60835-2-5:1993); German version EN 60835-2-5:1995
DIN EN 50317/A2:2008 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002/A2:2007
DIN EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) (IEC 61557-12:2007); German versi
DIN EN 61193-2:2008-08 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages (IEC 61193-2:2007); German version EN 61193-2:2007
DIN EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003

ES-UNE, Flow measurement using electronic metering systems Electronic gas measurement

UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
UNE-EN ISO 28057:2021 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019) (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN 60510-2-5:1994 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN SATELLITE EARTH STATIONS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION 5: FREQUENCY MODULATIONS. (Endorsed by AENOR in May of 1995.)
UNE-EN 60510-3-4:1994 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN SATELLITE EARTH STATIONS. PART 3: METHODS OF MEASUREMENT ON COMBINATIONS OF SUB-SYSTEMS. SECTION 4: MEASUREMENTS FOR FREQUENCY DIVISION MULTIPLES (F.D.M.) TRANSMISSION. (Endorsed by AENOR in May of 1995.)
UNE-EN 60510-2-6:1994 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN SATELLITE EARTH STATIONS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION 6: FREQUENCY DEMODULATIONS. (Endorsed by AENOR in May of 1995.)
UNE-EN 60835-2-5:1994 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 2: MEASUREMENTS ON TERRESTRIAL RADIO-RELAY SYSTEMS. SECTION 5: DIGITAL SIGNAL PROCESSING SUB-SYSTEMS. (Endorsed by AENOR in May of 1995.)
UNE-EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective...
UNE-EN 60835-2-10:1992 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWARE RADIO TRANSMISSION SYSTEMS. PART 2: MEASUREMENTS ON TERRESTRIAL RADIO-RELAY SYSTEMS. SECTION TEN- OVERALL SYSTEM PERFORMANCE (Endorsed by AENOR in May of 1995.)
UNE-EN 60835-3-12:1994 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 3: MEASUREMENTS ON SATELLITE EARTH STATIONS. SECTION 12: OVERALL SYSTEM PERFORMANCE. (Endorsed by AENOR in May of 1995.)
UNE-EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems (Endorsed by Asociación Española de Normalización in June of 2017.)

European Committee for Standardization (CEN), Flow measurement using electronic metering systems Electronic gas measurement

EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
HD 467.1.2 S1-1986 Methods of measurement for radio equipment used in satellite earth stations; part 1: measurements common to sub-systems and combinations of sub-systems; section 2: measurements in the r.f. range
HD 477.2.1 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 1: general
HD 477.1 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 1: measurements common to sub-systems and simulated radio-relay systems
HD 477.2.4 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 4: frequency modulators
HD 477.2.5 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 5: frequency demodulators
HD 477.2.2 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 2: stand-by channel switching equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flow measurement using electronic metering systems Electronic gas measurement

GB/T 18659-2023 Guidelines for the use of electromagnetic flowmeters for measuring fluid flow in closed pipes
GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
GB/T 18216.10-2022 Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c.—Equipment for testing, measuring or monitoring of protective measures—Part 10: Combined measuring equipment for te
GB/T 19629-2005 Medical Electrical equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging

GOSTR, Flow measurement using electronic metering systems Electronic gas measurement

GOST R 8.995-2020 State system for ensuring the uniformity of measurements. Volume flow rate and quantity of natural gas. Measurements procedure (method) using volumetric diaphragm and fluidics gas meters
GOST R IEC 60027-3-2016 State system for ensuring the uniformity of measurements. Letter symbols to be used in electrical technology. Part 3. Logarithmic and related quantities and units of measurement
GOST R 8.996-2020 State system for ensuring the uniformity of measurements. Steel upright cylindrical tanks. Calibration procedure using the electron optical method

American Gas Association, Flow measurement using electronic metering systems Electronic gas measurement

AGA GMM-8-1988 Gas Measurement Manual - Part 8: Electronic Flow Computers and Transducers (XQ8805)

RU-GOST R, Flow measurement using electronic metering systems Electronic gas measurement

GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST 8.202-1976 State system for ensuring the uniformity of measurements. The state primary standard and the all-union verification schedule for means measuring the flux of electrons and that of energy of the beam of accelerated electrons energy from 0,8 to 8,0 pJ (5 to
GOST 8.070-2014 State system for ensuring the uniformity of measurements. State verification schedule for means measuring absorbed doses and rate of absorbed dose, dose equivalent and rate of equivalent doses of photon and electron radiation
GOST R 8.887-2015 State system for ensuring the traceability of measurements. The electrokinetic potential (Zeta potential) particles in colloidal systems. Optical measurement methods
GOST 8.033-1984 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring the nuclide activity
GOST R 8.646-2008 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring volume densities of ionized air electric charge and air ion number concentration
GOST 8.563.3-1997 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Procedure and module of calculations. Software
GOST R 8.565-2014 State system for ensuring the uniformity of measurements. Metrological ensuring of atomic power stations. General principles
GOST R 8.683-2009 State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
GOST R 8.641-2013 State system for ensuring the iniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments)
GOST R 8.846-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Air ionizers and air ion generators. Methods of measuring their parameters
GOST R ISO 16183-2013 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
GOST R 8.997-2021 State system for ensuring the uniformity of measurements. Algorithms for evaluating metrological characteristics in certification of measurement procedures in the field of the use of atomic energy
GOST R 8.641-2008 State sysem for ensuring the iniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments)
GOST R 8.869-2014 State system for ensuring the uniformity of measurements. State verification schedule for means measuring electron paramagnetic resonance spectrum parameters
GOST R 8.697-2010 State system for ensuring the uniformity of measurements. Interpenar spacings in crystals. Method for measurement by means of a transmission electron microscope
GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
GOST R 8.696-2010 State system for ensuring the uniformity of measurements. Interplanar spacings in crystals and the intensity distribution in diffraction patterns. Method for measurement by means of an electron diffractometer
GOST 8.609-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of impulse electric and magnetic field strengths with duration of edges up to 20 ps
GOST R 8.849-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of electric capacitance and dielectric dissipation for AC high voltage of power frequency
GOST 8.143-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of gas within the range of 1x10 in minus 6 up to 1x10 in 2 degree m3/s
GOST R 8.591-2002 State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users
GOST R 8.769-2011 State system for ensuring the uniformity of measurements. Natural gas. Compression factor of gas phase. Method of calculation based on gas physical properties
GOST IEC 61010-2-061-2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometer with thermal atomization and ionization
GOST 8.369-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of gas within the range of 4x10 in minus 2 degree up to 2,5x10 in 2 degree kg/sec

Indonesia Standards, Flow measurement using electronic metering systems Electronic gas measurement

SNI ISO/ASTM 51631:2014

International Electrotechnical Commission (IEC), Flow measurement using electronic metering systems Electronic gas measurement

IEC TR 62725:2013 Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems
IEC 62014-5:2015 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
IEC 60510-1-3:1980/AMD1:1988 Amendment 1 - Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Three: Measurements in th
IEC 60835-2-5:1993 Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 5: digital signal processing sub-system
IEC 62337:2006 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones
IEC 62337:2012 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones
IEC 61557-10:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measur
IEC 61557-12:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
IEC 60107-4:1999 Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system
IEC 60107-5:1999 Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
IEC 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test

国家市场监督管理总局、中国国家标准化管理委员会, Flow measurement using electronic metering systems Electronic gas measurement

GB/T 14513.3-2020 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems

Military Standard of the People's Republic of China-General Armament Department, Flow measurement using electronic metering systems Electronic gas measurement

GJB 2165-1994 Method for determining absorbed dose of electronic devices using thermoluminescence dosimetry system

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flow measurement using electronic metering systems Electronic gas measurement

GB/T 34972-2017 Determination of metal content in gases—Inductively coupled plasma mass spectrometry method

Korean Agency for Technology and Standards (KATS), Flow measurement using electronic metering systems Electronic gas measurement

KS R ISO 16183:2009 Heavy duty engines-Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
KS B ISO TS 15768:2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS B ISO 18175:2021 Non-destructive testing — Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
KS C IEC 61010-2-61:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-61:Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
KS C IEC 61010-2-61:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-61: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
KS C IEC 62056-61-2003(2018)
KS B ISO 8322-8:2002 Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m
KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS C IEC 60107-3-2011(2021) Recommended methods of measurement on receivers for television broadcast transmissions－Part 3：Electrical measurements on multichannel sound television receivers using subcarrier systems
KS C IEC 60107-3-2011(2016) Recommended methods of measurement on receivers for television broadcast transmissions－Part 3：Electrical measurements on multichannel sound television receivers using subcarrier systems
KS B ISO 18175:2005 Non-destructive testing－Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
KS C IEC 60107-4-2011(2016) Recommended methods of measurement on receivers for television broadcast transmissions－Part 4：Electrical measurements on multichannel sound television receivers using the two-carrier FM-system
KS C IEC 60107-4-2011(2021) Recommended methods of measurement on receivers for television broadcast transmissions－Part 4：Electrical measurements on multichannel sound television receivers using the two-carrier FM-system

RO-ASRO, Flow measurement using electronic metering systems Electronic gas measurement

STAS SR CEI 510-1-2-1984 Methods of measurement for radio equipment used in satellite earth station. Part 1: Measurements common to sub-system and combination of sub-system. Section Two: Mesurement in the r.f. range
STAS CEI 731-1992 Medical electrical equipment. Dosimeters with ionisation chambers as used in radiotherapy

Institute of Electrical and Electronics Engineers (IEEE), Flow measurement using electronic metering systems Electronic gas measurement

IEEE 848-2015 Standard Procedure for the Determination of the Ampacity Derating Factor for Fire-Protected Cable Systems
IEEE/ANSI N42.50-2022 American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air
ANSI N42.50-2022 American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air
IEC 62014-5 IEEE Std 1734-2011 IEEE/IEC International Standard - Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs

Japanese Industrial Standards Committee (JISC), Flow measurement using electronic metering systems Electronic gas measurement

JIS B 7960-1:2015 Hydrogen ion meters using glass electrodes -- Measuring instruments used in transaction or certifications -- Part 1: Glass electrodes
JIS B 7960-1:2022 Hydrogen ion meters using glass electrodes -- Measuring instruments used in transaction or certification -- Part 1: Glass electrodes
JIS C 8945:2009 Temperature coefficient measuring methods of output voltage and output current for multi-junction solar cells and modules

ZA-SANS, Flow measurement using electronic metering systems Electronic gas measurement

SANS 1529-9:2008 Water meters for cold potable water Part 9: Requirements for electronic indicators used with mechanical water meters, electronic water meters and electronic prepayment water measuring systems

European Committee for Electrotechnical Standardization（CENELEC）, Flow measurement using electronic metering systems Electronic gas measurement

EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Remains Current)
EN 60835-2-5:1995 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio-Relay Systems Section 5: Digital Signal Processing Sub-System
EN 61193-2:2007 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
EN 60835-3-7:1995 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 7: Figure-of-Merit of Receiving System
EN 60835-3-12:1995 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 12: Overall System Performance
HD 477.2.6 S1-1987 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 2: Measurements for Sub- Systems Section Six - Diversity, Twin-Path and Hot Stand-by Equipment
EN 61557-13:2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leaka
EN 60835-2-10:1993 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio- Relay Systems Section Ten - Overall System Performance
EN 61674:2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging

CENELEC - European Committee for Electrotechnical Standardization, Flow measurement using electronic metering systems Electronic gas measurement

EN 61010-2-061:1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization

Professional Standard - Electron, Flow measurement using electronic metering systems Electronic gas measurement

SJ/T 11405-2009 Semiconductor optoelectronic devices for fibre optic system applications.Part 2:Measuring methods

KR-KS, Flow measurement using electronic metering systems Electronic gas measurement

KS B ISO TS 15768-2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS B ISO 18175-2021 Non-destructive testing — Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

Professional Standard - Electricity, Flow measurement using electronic metering systems Electronic gas measurement

DL/T 1015-2006 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 1015-2019 Guidelines for the use of voltage measurement systems for on-site DC and AC withstand voltage tests
DL/T 1474-2015 Method for measuring hydrophobicity of composite insulators used in AC and DC systems with nominal voltage higher than 1000V

Fujian Provincial Standard of the People's Republic of China, Flow measurement using electronic metering systems Electronic gas measurement

DB35/T 1248-2012 Determination of impurity content in germane gas for electronics industry - Gas chromatography

(U.S.) Telecommunications Industries Association , Flow measurement using electronic metering systems Electronic gas measurement

TIA-5430000-1989 Generic Specification Field Portable Electronic Instruments for Optical Fiber System

BELST, Flow measurement using electronic metering systems Electronic gas measurement

STB 8060-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Metrological ensuring of atomic power stations exploitation. General principles
STB 8038-2014 System for ensuring theuniformity of measurements of the Republic of Belarus. Electronic frequency counters. Methods of verification

Standard Association of Australia （SAA）, Flow measurement using electronic metering systems Electronic gas measurement

IEC 60107-3:1988+AMD1:1999 CSV Recommended methods of measurement on receivers for television broadcast transmissions — Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems
IEC 60107-4:1988+AMD1:1999 CSV Recommended methods of measurement on receivers for television broadcast transmissions — Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system