ZH
RU
ES

thread thread relationship

thread thread relationship, Total:498 items.

In the international standard classification, thread thread relationship involves: Fasteners, Screw threads, Pipeline components and pipelines, Fasteners for aerospace construction, Vocabularies, Machine tool systems, Technical drawings, Cutting tools, Hand-held tools, Valves, Surface treatment and coating, Linear and angular measurements, Bottles. Pots. Jars, Aerospace electric equipment and systems, Fluid storage devices, Burners. Boilers, Machine tools, Ground service and maintenance equipment, Materials and components for railway engineering, Metrology and measurement in general, Shipbuilding and marine structures in general, Rubber and plastics products.


IFI/FASTNR - Industrial Fastener Institute, thread thread relationship

  • 143-2002 Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners
  • PROJEC- Projection Weld Studs (Threaded)
  • SECT A- Section A - Screw Threads

Society of Automotive Engineers (SAE), thread thread relationship

SE-SIS, thread thread relationship

CH-SNV, thread thread relationship

Standard Association of Australia （SAA）, thread thread relationship

BR-ABNT, thread thread relationship

AT-ON, thread thread relationship

  • ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
  • ONORM M 1530-1979 Thread and thread endsfor wood screws
  • ONORM M 1500-1973 ISO metric screw threads; thread profile Filetages me'triques ISO; profil de filetage
  • ONORM M 1515-1968
  • ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs
  • ONORM M 1804-1987 Thread ends and lengths of holt ends for metric ISO-threads
  • ONORM ISO 1478:1986 Tapping screws thread Filetage de vis ? t?le
  • ONORM M 5251-1965 Die Schlüsselweiten der Hutmuttern entsprechen der ISO-Empfehlung R 272. Bis zum 31. 12. 1965 dürfen die Hutmuttern M 8 und M 8X. 1 noch mit der Schlüsselweite s = 14 mm geliefert werden.

RU-GOST R, thread thread relationship

German Institute for Standardization, thread thread relationship

  • DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
  • DIN 7965:1965 Screwed Inserts (Screw Plugs)
  • DIN 7965:1965-09 Screwed Inserts (Screw Plugs)
  • DIN 65208:2016-11 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
  • DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
  • DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
  • DIN 7998:1975 Threads and Thread Ends for Wood Screws
  • DIN 7998:1975-02 Threads and Thread Ends for Wood Screws
  • DIN 65208:2016 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
  • DIN 16261:2023-02 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: Date of issue 2023-01-13*Intended as replacement for DIN 16261 (2004-07).
  • DIN 16261:2004-07 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: To be replaced by DIN 16261 (2019-07), DIN 16261 (2023-02).
  • DIN ISO 6410-2:1993 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
  • DIN 5606-2:1975-03 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
  • DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
  • DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
  • DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
  • DIN 76-3:1977-01 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
  • DIN 65358:2016-12 Aerospace series - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts
  • DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
  • DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
  • DIN 513-1:1985 Metric buttress threads; thread profiles
  • DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
  • DIN 8140-2:2005 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
  • DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
  • DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
  • DIN 80705:2018-07 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
  • DIN 405-3:1997 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
  • DIN 5606-2:1975 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
  • DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
  • DIN 103-2:1977 ISO Metric Trapezoidal Screw Thread; General Plan
  • DIN 380-1:1985-04 Stub metric trapezoidal screw threads; thread profiles
  • DIN 65358:2016 Aerospace series - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts
  • DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
  • DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
  • DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
  • DIN 40431-1:1970 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
  • DIN 380-1:1985 Stub metric trapezoidal screw threads; thread profiles
  • DIN EN ISO 1478:1999 Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
  • DIN 802-5:1997 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
  • DIN 30387:1976 Shouldered nuts; metric fine thread, rounded acme thread
  • DIN 30387:2007 Shouldered nuts - Metric fine thread, rounded acme thread
  • DIN 30387:2007-06 Shouldered nuts - Metric fine thread, rounded acme thread
  • DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
  • DIN ISO 6410-2:1993-12 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
  • DIN 8140-2 Berichtigung 1:2017-03 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
  • DIN 65349:2001-06 Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods
  • DIN 20400:1990 Knuckle threads for the mining; threads with large load-bearing depth
  • DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
  • DIN 2279:2001-12 Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application
  • DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
  • DIN 65358:2011 Aerospace - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts
  • DIN 852-1:1991 Bore type thread milling cutters for ISO metric threads; dimensions
  • DIN 513-1:2020 Metric buttress threads - Part 1: Thread profiles
  • DIN 80705:1990 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
  • DIN 80705:2018 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
  • DIN 3852-11:1994 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions

CZ-CSN, thread thread relationship

Association Francaise de Normalisation, thread thread relationship

  • NF L05-020:1954 Screw threads. Thread run-outs (rech.).
  • NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
  • NF E66-101*NF ISO 5969:2002 Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion.
  • NF L05-020:1966 SCREW THREADS. THREAD RUN-OUTS. (RECH.).
  • NF L22-208:1984 Bolt, hexagonal head, threaded to head. ISO thread.
  • NF ISO 2901:2016 Filetages métriques trapézoïdaux ISO - Profils de base et nominal
  • NF E03-056:1970 ISO SYSTEM OF TOLERANCES FOR SCREW THREADS. COARSE QUALITY 7H/8 G FOR SCREWS AND BOLTS.
  • NF L22-293:1979 Slotted cheese ehad screws, fully threaded. ISO thread.
  • NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
  • NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
  • NF L22-294:1979 Slotted raised cheese head screws, fully threaded. ISO thread.
  • NF L05-110:1966 SCREW THREADS. SELECTION FOR AIRCRAFT INDUSTRY. (RECH.).
  • NF EN ISO 6410-2:1996 Dessins techniques - Filetages et pièces filetées - Partie 2 : inserts filetés.
  • NF L22-291:1979 Slotted 90 degrees countersunk head screws, fully threaded. ISO thread.
  • NF L22-292:1979 Slotted 60 degrees countersunk head screws, fully threaded. ISO thread.
  • NF L22-298:1979 Hexagon socket head cap screws, fully threaded. ISO thread.
  • NF L22-209:1984 Bolt, hexagonal head, with locking hole threaded to head. ISO thread.
  • NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
  • NF H35-131*NF EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
  • NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.
  • NF L22-275:1982 Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.
  • NF L05-200:1952 Metric screw threads. Sim profile (rech.).
  • NF L05-200:1966 METRIC SCREW THREADS. SIM PROFILE. (RECH.).
  • NF E25-650-2:1994 TAPPING SCREWS THREAD. (EUROPEAN STANDARD EN ISO 1478).
  • NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
  • NF E03-152:1981 Thread checking with limit gauges. Threaded gauges for screw.
  • NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
  • NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
  • NF EN 10226-1:2004 Filetages de tuyauterie pour raccordement avec étanchéité par le filetage - Partie 1: filetages extérieurs coniques et filetages intérieurs cylindriques - Dimensions, tolérances et désignation
  • NF EN 2943:2019 Série aérospatiale - Filets rapportés, filetages MJ et M - Spécification technique
  • NF L05-110:1953 Screw threads. Selection for aircraft industry (rech.).
  • NF F00-032:1992 Matériel ferroviaire en général - Filetages à filet rond - Profil.
  • NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
  • NF EN 10226-2:2005 Filetages de tuyauteries pour raccordement avec étanchéité par le filetage - Partie 2 : filetages extérieurs coniques et filetages intérieurs coniques - Dimensions, tolérances et désignation
  • NF L22-574:1978 SELF-LOCKING ANCHOR NUTS,ANGLE,MINIATURE SERIES,DEEP COUNTERBORE IN CADMIUM-PLATED 25 CD 4 S STEEL. ISO THREAD.
  • NF E03-500*NF ISO 1501:2009 ISO miniature screw threads
  • NF L05-420:1955 Buttress screw threads.
  • FD E03-003:2006 Screw threads - References of main standardized foreign screw threads
  • FD E03-003:2022 Filetages - Références des principaux filetages étrangers normalisés
  • NF L22-259:1982 100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.
  • NF E03-153:1975 Checking of threads with limit gauges-threaded gauges for nuts.

U.S. Military Regulations and Norms, thread thread relationship

IN-BIS, thread thread relationship

British Standards Institution (BSI), thread thread relationship

  • BS EN ISO 6410-2:1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts
  • BS 919-2:2007 Screw gauge limits and tolerances – Part 2: Specification for gauges for screw threads of Whitworth and B.A. forms
  • 2A 231-1993 Rolled threads for bolts. Lead and runout requirements
  • PD 6494-1980 Mismatch of screw thread systems
  • ASME B18.31.3-2014(R2021) Threaded Rods (Inch Series)
  • PD 6494:1980 Mismatch of screw thread systems
  • BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C. E.I. threads)
  • BS 84:2007 Parallel screw threads of Whitworth form – Requirements
  • BS ISO 68-1:1998+A1:2020 ISO general purpose screw threads. Basic profile. Metric screw threads
  • BS ISO 68-2:1998+A1:2020 ISO general purpose screw threads. Basic profile. Inch screw threads
  • BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation

RO-ASRO, thread thread relationship

Taiwan Provincial Standard of the People's Republic of China, thread thread relationship

Defense Logistics Agency, thread thread relationship

BE-NBN, thread thread relationship

Japanese Industrial Standards Committee (JISC), thread thread relationship

  • JIS B 1006:1985 Thread run-outs and thread undercuts for external threaded fasteners
  • JIS B 0123:1999 Designation system for screw threads
  • JIS B 0002-2:1998 Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts
  • JIS B 1197:1982 Threaded studs
  • JIS B 1006:2009 Fasteners -- Thread run-outs for external thread in accordance with ISO general purpose metric screw threads

Korean Agency for Technology and Standards (KATS), thread thread relationship

YU-JUS, thread thread relationship

  • JUS K.T3.170-1985 Slats in the threaded part of the threaded gauging members
  • JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
  • JUS M.B1.036-1979 SO internat trapezoidal screw threads, knuckle screw treads and other screw threa?s of coarse pitches. Runouts and undercuts
  • JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges
  • JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
  • JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges
  • JUS M.B0.072-1981 Buttress threads. System of tolerances

Professional Standard - Aviation, thread thread relationship

  • HB 1922-1975 Tapered thread medium diameter thread plug gauge
  • HB 1926-1975 Taper thread middle diameter thread ring gauge
  • HB 7417-1996 MJ thread short thread small hexagon head bolts
  • HB 7417～7420-1996 MJ thread short thread small hex head bolts
  • HB 7418-1996 MJ thread short thread small hexagon head bolts
  • HB 7418-2013 A286MJ thread short thread small hex head bolts
  • HB 7419-1996 MJ thread short thread small hexagon head bolts
  • HB 7420-1996 MJ thread short thread small hexagon head bolts
  • HB 1924-1975 Tapered thread root high thread plug gauge
  • HB 1928-1975 Tapered thread root high thread ring gauge
  • HB 4-80-1976 Tapered thread plug
  • HB 4265-2004 Internal screw gauge for wire thread insert
  • HB 4265-1989 Thread plug gauges for internal threads for mounting wire thread inserts
  • HB 247-1972 Taper thread
  • HB 4007-1987 Taper thread pith diameter screw thread ring gauge exclusively used for gas cylinders
  • HB 4006-1987 Taper thread pith diameter screw thread plug gauge exclusively used for gas cylinders
  • HB 246-1975 Screw thread finishing (washout thread, thread margin, undercut, chamfer, ring groove)
  • HB 7415-1996 MJ thread polished rod tolerance with f9 short thread hexagon head bolts
  • HB 7416-1996 MJ thread polished rod tolerance with r6 short thread hexagon head bolts
  • HB 8317-2013 A286 polished rod tolerance band f9MJ thread short thread hexagon head bolt
  • HB 1930-1975 Calibration plug gauge for taper thread pitch diameter thread ring gauge
  • HB 7422-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
  • HB 7424-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
  • HB 7421-1996 MJ thread polished rod tolerance band f9 short thread small hexagon head bolts
  • HB 7422～7424-1996 MJ thread polished rod tolerance band h8 short thread small hexagon head bolts
  • HB 7423-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts

(U.S.) Ford Automotive Standards, thread thread relationship

IT-UNI, thread thread relationship

FI-SFS, thread thread relationship

Danish Standards Foundation, thread thread relationship

American Society of Mechanical Engineers (ASME), thread thread relationship

NO-SN, thread thread relationship

  • NS 1095-1963 UNC-threads for the metal end of studs - Tolerances on the threads
  • NS 5321-1977 Hand taps for pipe threads for taper threads

HU-MSZT, thread thread relationship

Professional Standard - Machinery, thread thread relationship

ZA-SANS, thread thread relationship

Military Standard of the People's Republic of China-General Armament Department, thread thread relationship

United States Navy, thread thread relationship

PK-PSQCA, thread thread relationship

SAE - SAE International, thread thread relationship

NL-NEN, thread thread relationship

  • NEN-ISO 6410-2:1994 Technical drawings.Screw threads and threaded parts.Part 2:Screw thread inserts

KP-CSK, thread thread relationship

  • KPS 102-2-2002 Technical drawings-Screw threads and threaded parts-Part 2:Screw thread inserts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thread thread relationship

  • GB/T 42851-2023 1517MPaMJ threaded bolts
  • GB/T 42850-2023 1275MPaMJ threaded bolts
  • GB/T 15054.2-1994 Miniature screw threads.Generat plan
  • GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
  • GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
  • GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
  • GB/T 193-2003 General purpose metric screw threads--General plan
  • GB/T 5796.2-1986 Metric trapezoidal screw threads--System of diameter and pitch
  • GB/T 20334-2006 Ground thread taps for pipe threads G series and Rp series.Tolerances on the threaded portion
  • GB/T 5280-2002 Tapping screws thread
  • GB/T 1850-2008 Marine male threaded weight quick-closing valves
  • GB/T 1850-1984 Marine male threaded weight quick-closing valves
  • GB/T 1414-2003 General purpose metric screw threads--The plan for pipe systems
  • GB/T 9144-2003 General purpose metric screw threads--Preferable plan
  • GB/T 1414-2013 General purpose metric screw threads.The plan for pipe systems

AR-IRAM, thread thread relationship

International Organization for Standardization (ISO), thread thread relationship

VN-TCVN, thread thread relationship

European Committee for Standardization (CEN), thread thread relationship

TH-TISI, thread thread relationship

American National Standards Institute （ANSI), thread thread relationship

Professional Standard - Aerospace, thread thread relationship

  • QJ 2090-1991 MJ threaded fasteners 1100MPa/235°C pan head short threaded bolts
  • QJ 2085-1991 MJ threaded fasteners 1100MPa/235°C countersunk head short thread bolts
  • QJ 1977-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head short thread bolts
  • QJ 1319.1-1987 Ordinary thread gauge thread ring gauge (d=1~100mm)
  • QJ 2760.2-1995 MJ Thread Ring Gauge Double Handle MJ Thread Ring Gauge
  • QJ 2760.1-1995 MJ Thread Ring Gauge Shankless MJ Thread Ring Gauge
  • QJ 2759.1-1995 MJ Thread Plug Gauge Integral MJ Thread Plug Gauge
  • QJ 2091-1991 MJ threaded fasteners 1100MPa/235°C pan head close tolerance short thread bolts
  • QJ 2086-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance short thread bolts

AIA/NAS - Aerospace Industries Association of America Inc., thread thread relationship

  • NAS258-1947 Elbow - 90 Degree@ Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev 2)
  • NAM51417-1999 Bolt@ Machine@ Hex Head@ Fully Threaded@ Fine Thread@ Metric
  • NAS9603-9624-1996 Bolt@ Hexagon Head@ A286 CRES Close Tolerance@ Minimum Major@ Long Threads
  • NASM33537-2002 Insert@ Screw Thread@ Helical Coil@ Inch Series@ Coarse and Fine Thread@ Standard Assembly Dimensions for

TR-TSE, thread thread relationship

KR-KS, thread thread relationship

Professional Standard - Automobile, thread thread relationship

GOSTR, thread thread relationship

  • GOST R 59110-2020 Motor vehicles. Fasteners. Thread run-outs and thread undercuts for ISO metric threads

Compressed Gas Association (U.S.), thread thread relationship

  • CGA TB-16-2010 Recommended coding system for threaded cylinder outlets and threaded valve inlets

Lithuanian Standards Office , thread thread relationship

  • LST EN ISO 6410-2:2001 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)

Aerospace Industries Association, thread thread relationship

  • AIA NAS 258-1947 (Inactive)Elbow - 90 Degree, Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev. 2)

Aerospace Industries Association/ANSI Aerospace Standards, thread thread relationship

  • AIA/NAS NASM33537-2002 Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for FSC 5340
  • AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1

ES-AENOR, thread thread relationship

AENOR, thread thread relationship

  • UNE-EN ISO 6410-2:1996 TECHNICAL DRAWINGS. SCRES THREADS AND THREADED PARTS. PART 2: SCREW THREAD INSERTS. (ISO 6410-2:1993).
  • UNE 17077:1980 SCREWS, BOLTS AND STUDS. THREAD RUN OUT.

国家市场监督管理总局、中国国家标准化管理委员会, thread thread relationship

  • GB/T 37050-2019 Fastening screw thread gaging systems for acceptability
  • GB/T 39641-2020 Methods for gaging fastening screw threads by thread indicating gages

PL-PKN, thread thread relationship

  iso pipe thread, psi thread, mjb thread, graphite thread, mj thread m thread, Thread Analysis, Thread parameters, thread uni, ti thread, Wave thread, gl thread, Threaded slide valve, gl thread, thread extension, thread gl, Thread torque, thread psi, mj thread and m thread, mj thread thread, thread thread relationship.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved