ZH
RU
ES

count analysis board

count analysis board, Total:499 items.

In the international standard classification, count analysis board involves: Quality, Mechanical testing, Testing of metals, Microbiology, Insulating materials, Sugar. Sugar products. Starch, Non-ferrous metals, Construction industry, Biology. Botany. Zoology, Environmental testing, Thermodynamics and temperature measurements, Paper and board, Insulating fluids, Languages used in information technology, Road vehicle systems, Vocabularies, Company organization and management, Environmental protection, Mathematics, Corrosion of metals, Fuels, Electricity. Magnetism. Electrical and magnetic measurements, Adhesives, Natural gas, Software development and system documentation, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Medical sciences and health care facilities in general, Analytical chemistry, Radiation measurements, Pulps, Ceramics, Particle size analysis. Sieving, Printed circuits and boards, Aerospace electric equipment and systems, Milk and milk products, Shipbuilding and marine structures in general, Raw materials for rubber and plastics, Wastes, Earthworks. Excavations. Foundation construction. Underground works, Road vehicles in general, Water quality, Lubricants, industrial oils and related products, Acoustics and acoustic measurements, Ferrous metals, Applications of information technology, Animal feeding stuffs, Medical equipment, Fluid power systems, Products of the chemical industry, Equipment for the chemical industry, Aircraft and space vehicles in general, Products of the textile industry, Industrial automation systems, Electronic component assemblies, Cargo equipment, Paint ingredients, Information technology (IT) in general, Construction materials, Protection of and in buildings, Metrology and measurement in general, Air quality, Diagnostic, maintenance and test equipment, Coals, Sensory analysis, Power transmission and distribution networks.

German Institute for Standardization, count analysis board

DIN 53804-3:1982 Statistical interpretation; Ordinal characteristics
DIN 53804-2:1985 Stastistical interpretation of data; countable (discrete) characteristics
DIN 10161-2:1984 Microbiological analysis of meat and meat products; aerobic count at 30 °C; drop plating method
DIN 10161:2016 Microbiological analysis of meat and meat products - Aerobic count at 30 °C - Drop plating method
DIN 18807-3:1987 Trapezoidal sheeting in building; trapezoidal steel sheeting; structural analysis and design
DIN 10122:2018-02 Analysis of foodstuffs - Enumeration of microorganisms by means of impedance-method - Determination of aerobic mesophile bacterial count
DIN 43870-3:1985 Meter panels; wirings
DIN 10161-1:1984 Microbiological analysis of meat and meat products; aerobic count at 30 °C; spatula method and method with poured plates (reference method)
DIN 55303-7:1996 Statistical interpretation of data - Part 7: Estimating and test procedures for Weibull distributions with two parameters
DIN EN ISO 12213-2:2010-01 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006); German version EN ISO 12213-2:2009
DIN EN 1325-2:2004 Value Management, Value Analysis, Functional Analysis Vocabulary - Part 2: Value Management; German version EN 1325-2:2004
DIN 43870-4:1985 Meter panels; cover for wiring
DIN 10186:2005 Microbiological analysis of milk - Enumeration of yeasts and moulds - Reference method
DIN 10186:2022-11 Microbiological analysis of milk - Enumeration of yeasts and moulds - Reference method
DIN V 4085-100 Bb.1:1997 Soil - Calculation of earth pressure - Part 100: Analysis in accordance with the partial safety factor concept; calculation examples
DIN EN ISO 12213-2:2005 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:1997); German version EN ISO 12213-2:2005
DIN 58960-4:1991 Photometer for analytical tests; requirements for the description of technical data for the user
DIN 10474:2003-02 Determination of the butter type with neural network analysis of compositional parameters - Chemometric method
DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
DIN 21057-1:2016-12 Microbiological analysis of meat and meat products - Aerobic count at 30 °C - Drop plating method
DIN 10161:2016-12 Microbiological analysis of meat and meat products - Aerobic count at 30 °C - Drop plating method
DIN EN 15876-1:2016-12 Microbiological analysis of meat and meat products - Aerobic count at 30 °C - Drop plating method
DIN 4018 Beiblatt 1:1981-05 Subsoil; analysis of contact pressure distribution under raft foundations; explanations and examples of analysis
DIN V 4084-100 Bb.1:1997 Soil - Calculation of slope and embankment failure and overall stability of retaining structures - Part 100: Analysis in accordance with the partial safety factor concept, calculation examples
DIN 21906:2017-08 Mine plans - Subdivision of sheets
DIN V 4019-100:1996 Soil - Analysis of settlement - Part 100: Analysis in accordance with partial safety factor concept
DIN EN 17545:2020 Paper and board - Determination of Composition of Paper and Board for Recycling by gravimetric analysis; German and English version prEN 17545:2020
DIN IEC/TR 60493-3:2019-08*DIN SPEC 40493-3:2019-08 Guidelines for the statistical analysis of ageing test data - Part 3: Minimum specimen numbers at different test conditions with given experimental data (IEC TR 60493-3:2017)
DIN 96115:2010 Medical instruments - Gauges type Lexer
DIN 58960-2:1997 Photometer for analytical tests - Part 2: Technical design; classification, components, concepts
DIN EN 17545:2022 Paper and board - Determination of composition of paper and board for recycling by gravimetric analysis
DIN EN 17545:2022-02 Paper and board - Determination of composition of paper and board for recycling by gravimetric analysis; German version EN 17545:2021
DIN ISO/TS 12913-3:2021-06 Acoustics - Soundscape - Part 3: Data analysis (ISO/TS 12913-3:2019)
DIN 58960-2:1997-05 Photometer for analytical tests - Part 2: Technical design; classification, components, concepts
DIN 10122:2005 Analysis of foodstuffs - Enumeration of microorganisms by means of impedance-method - Determination of aerobic mesophile bacterial count
DIN 12837:1954 Apparatus for dairy analyses; pipettes for the milk butyrometer

Indonesia Standards, count analysis board

SNI 07-6731-2002 Methods for fatigue analysis counting cycle
SNI 19-3386-1994 Definition of tennis for fatique testing and the stastical analysis of fatique data

British Standards Institution (BSI), count analysis board

PD IEC/TR 60493-2:2010 Guide for the statistical analysis of ageing test data. Validation of procedures for statistical analysis of censored normally distributed data
BS ISO 20391-2:2019 Biotechnology. Cell counting - Experimental design and statistical analysis to quantify counting method performance
BS 5703-4:2003 Guide to data analysis and quality control using cusum techniques - Cusum methods for discrete (count/classified) data
BS 2846-1:1991 Guide to statistical interpretation of data - Routine analysis of quantitative data
BS 5350-E1:1976 Methods of test for adhesives - Sampling and analysis of test data - Guide to statistical analysis
BS ISO/IEC 20968:2002 Software engineering - Mk II function point analysis - Counting practices manual
BS ISO 12213-2:1998 Natural gas - Calculation of compression factors - Calculation using a molar composition analysis
BS EN 1325-2:2004 Value management, value analysis, functional analysis vocabulary - Value management
BS ISO 12107:2003 Metallic materials - Fatigue testing - Statistical planning and analysis of data
BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS 6068-4.12:1998 Water quality - Microbiological methods - Detection and enumeration of Legionella
17/30347641 DC BS ISO 12107. Metallic materials. Fatigue testing. Statistical planning and analysis of data
20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS ISO 19229:2015 Gas analysis. Purity analysis and the treatment of purity data
20/30372722 DC BS EN 15786. Animal feeding stuffs: Methods of sampling and analysis. Isolation and enumeration of Pediococcus spp.
20/30372725 DC BS EN 15787. Animal feeding stuffs: Methods of sampling and analysis. Isolation and enumeration of Lactobacillus spp.
BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
PD ISO/TS 12913-3:2019 Acoustics. Soundscape. Data analysis
BS ISO 14802:2012 Corrosion of metals and alloys. Guidelines for applying statistics to analysis of corrosion data
20/30372731 DC BS EN 15788. Animal feeding stuffs: Methods of sampling and analysis. Isolation and enumeration of Enterococcus (E. faecium) spp.
BS PD ISO/TS 8000-81:2021 Data quality. Data quality assessment. Profiling
PD ISO/TS 8000-81:2021 Data quality. Data quality assessment. Profiling
BS 5703-3:2003 Guide to data analysis and quality control using cusum techniques - Cusum methods for process/quality control using measured data
PD IEC TR 62829-1:2019 Chemometrics for process analytical technologies. General provisions, and methods for univariate statistics and chemometric processing of data
BS 5763-5:1981 Methods for microbiological examination of food and animal feeding stuffs - Enumeration of micro-organisms - Colony count at 30 °C (surface plate technique)
BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
BS ISO 18314-3:2015 Analytical colorimetry. Special indices
PD IEC/TR 60493-3:2017 Guidelines for the statistical analysis of ageing test data. Minimum specimen numbers at different test conditions with given experimental data
BS ISO 8062-4:2017 Guidelines for the statistical analysis of ageing test data. Minimum specimen numbers at different test conditions with given experimental data
BS EN 17545:2021 Paper and board. Determination of composition of paper and board for recycling by gravimetric analysis
BS ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by microscopic analysis
20/30372719 DC BS EN 15784. Animal feeding stuffs: Methods of sampling and analysis. Isolation and enumeration of presumptive Bacillus spp.
BS ISO 19229:2019 Tracked Changes. Gas analysis. Purity analysis and the treatment of purity data
BS 5703-2:2003 Guide to data analysis and quality control using cusum techniques - Introduction to decision-making using cusum techniques

RU-GOST R, count analysis board

GOST R 50779.27-2017 Statistical methods. Weibuii distribution. Data analysis
GOST 28488-1990 Multichannel analyzers as multichannel scalers. Test methods
GOST R 50779.80-2013 Statistical methods. Attribute agreement analysis
GOST R ISO 8589-2005 Sensory analysis. Guidance for the design of test rooms

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., count analysis board

ASHRAE SF-98-9-5-1998 Analytical Model for the Design of In-Slab Electric Heating Panels
ASHRAE 3752-1994 Design Sensitivity Analysis for Optimal Temperature Control of a Radiant Electric Slab
ASHRAE CH-06-9-2-2006 An Analysis of the Effects of Ceiling Height on Air Distribution in Data Centers
ASHRAE MN-00-14-2-2000 Numerical Analysis of Three-Dimensional Heat Transfer and Fluid Flow in Chevron Plate Channels
ASHRAE 4704-2004 Analysis and Validation of a Psychrometric Apparatus
ASHRAE GUIDELINE 2-2010 Engineering Analysis of Experimental Data
ASHRAE LV-11-028-2011 Parametric Analysis to Support the Integrated Design and Performance Modeling of Net Zero Energy Houses
ASHRAE 4406-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls
ASHRAE 160 ADD B-2012 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160-2016 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160 ADD C-2012 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160-2009 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160 ADD A-2011 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160 ERTA-2009 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160 ADD D-2016 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 160 ADD E-2016 Criteria for Moisture-Control Design Analysis in Buildings
ASHRAE 4389-2000 Parametric Analysis and Development of a Design Tool for Foundation Heat Gain for Coolers (RP-953)
ASHRAE GUIDELINE 2-1986 Guideline to Engineering Analysis of Experimental Data
ASHRAE GUIDELINE 2-2005 Guideline to Engineering Analysis of Experimental Data

American National Standards Institute （ANSI), count analysis board

ANSI/ASTM E1561:1993 Practice for Analysis of Strain Gage Rosette Data
ANSI/IEEE 101:1995 Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/TAPPI T563 om-2012 Equivalent black area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis
ANSI/IEEE 930:2005 Electrical Insulation Voltage Endurance Data, Guide for the Statistical Analysis of
ANSI/ASTM E1323:2009 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ANSI/ASHRAE 160 Addendum A-2021 Criteria for Moisture-Control Design Analysis in Buildings
ANSI/ASTM E2563:2013 Test Method For Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method
ANSI/ASHRAE 160 Addendum b-2012 Criteria for Moisture-Control Design Analysis in Buildings
ANSI/ASHRAE 160a-2011 Criteria for Moisture Design Analysis in Buildings

Danish Standards Foundation, count analysis board

DS/IEC/TR 60493-2:2010 Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data
DS/ISO 2854:1980 Statistical interpretation of data. Techniques of estimation and tests relating to means and variances
DS/IEC 62539:2008 Guide for the statistical analysis of electrical insulation breakdown data
DS/ISO 3494:1980 Statistical interpretation of data. Power of tests relating to means and variances
DS/EN ISO 12213-2:2010 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis
DS 2401:1999 Environmental quality - Enumeration of enterococci - Colony count on solid medium - Spread plate method
DS/ISO 8553:2004 Milk - Enumeration of microorganisms - Plate-loop technique at 30 °C
DS/CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
DS 3029:2001 Environmental quality - Enumeration of Legionella - Concentration and colony count on solid medium - Spread plate method
DS/ISO 11056:2000 Sensory analysis - Methodology - Magnitude estimation method
DS/EN ISO 4833-1:2013 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 1: Colony count at 30 degrees C by the pour plate technique

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, count analysis board

GB/T 21223.2-2015 Guide for the statistical analysis of ageing test data.Part 2:Validation of procedures for statistical analysis of censored normally distributed data
GB/T 12336-1990 Standard practice for applying statistics analysis of corrosion data
GB/T 29310-2012 Guide for the statistical analysis of electrical insulation breakdown data
GB/T 24176-2009 Metallic materials.Fatigue testing.Statistical planning and analysis of data
GB/T 15445.5-2011 Representation of results of particle size analysis.Part 5:Methods of calculations relating to particle size analyses using logarithmic normal probability distribution
GB/T 38521-2020 Gas analysis—Purity analysis and the treatment of purity data
GB/Z 21223.3-2023 Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data
GB/T 462-2008 Paper,board and pulp.Determination of moisture content of analytical sample
GB/T 4688-2002 Paper、board and pulps--Analysis of fiber furnish
GB/T 24213-2009 General rules for original position statistic distribution analysis method
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 19547-2004 Sensory analysis-Methodology-Magnitude estimation method

International Electrotechnical Commission (IEC), count analysis board

IEC TR 60493-2:2010 Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data
IEC 62539:2007 Guide for the statistical analysis of electrical insulation breakdown data
IEC TR 61188-8:2021 Circuit boards and circuit board assemblies - Design and use - Part 8: 3D shape data for CAD component library
IEC TR 60493-3:2017 Guidelines for the statistical analysis of ageing test data - Part 3: Minimum specimen numbers at different test conditions with given experimental data
IEC TR 62829-1:2019 Chemometrics for process analytical technologies - Part 1: General provisions, and methods for univariate statistics and chemometric processing of data

SE-SIS, count analysis board

SIS SS IEC 493:1982 Guide for the statistical analysis of ageing test data
SIS SS 02 81 79-1986 Faecal streptococci in water - Enumeration with colony counting methods
SIS SS 02 81 78-1986 Microbiological water analysis - Spread plate technique

RO-ASRO, count analysis board

STAS SR 13300-3-1994 Starches. Methods of analysis. Black points number determination
STAS 7122/6-1987 STATI STICAL INTERPRETATION OF DATA Determination of a statistical tole- rance interval for a normal distribu- tion
STAS ISO 8784-1:1992 Paper and board. Determination of microbiological properties. Part 1: Total bacterial count
SR 110-2-1995 Sugar. Methods of analysis. Estimation of European points

Professional Standard - Machinery, count analysis board

JB/T 10579-2006 Standard practice for applying statistics analysis of corrosion data

ESDU - Engineering Sciences Data Unit, count analysis board

ESDU 92040-1992 An introduction to the statistical analysis of engineering data.
ESDU 91017 D-1997 Statistical methods applicable to analysis of aircraft performance data.
ESDU 91017 F-2015 Statistical methods applicable to analysis of aircraft performance data
ESDU 91017 E-2013 Statistical methods applicable to analysis of aircraft performance data
ESDU 91041 B-1993 The statistical analysis of data from Normal distributions@ with particular reference to small samples.
ESDU 00018-2000 Example of statistical analysis of wet runway friction: ground-test machine data.
ESDU 00018-2010 Example of statistical analysis of wet runway friction: ground-test machine data
ESDU 94004 A-2003 Stress analysis of laminated flat plates.
ESDU 94004-1994 STRESS ANALYSIS OF LAMINATED FLAT PLATES
ESDU 77014 A-1983 Flat panels in shear. Post-buckling analysis.
ESDU 77014 B-2012 Flat panels in shear – Post-buckling analysis
ESDU 99009-1999 An introduction to Statistical Energy Analysis.
ESDU 02005-2003 Flat panels in shear - post-buckling analysis.
ESDU 99017-1999 EXAMPLE OF STATISTICAL ANALYSIS OF WET RUNWAY FRICTION: AIRCRAFT WITH LIMITED SET OF TEST DATA
ESDU 99017 A-2000 Example of statistical analysis of wet runway friction: aircraft with limited set of test data.
ESDU 99017 A-2010 Example of statistical analysis of wet runway friction: aircraft with limited set of test data
ESDU 99016 A-2010 Example of statistical analysis of wet runway friction: aircraft with extensive set of test data
ESDU 99016-1999 EXAMPLE OF STATISTICAL ANALYSIS OF WET RUNWAY FRICTION: AIRCRAFT WITH EXTENSIVE SET OF TEST DATA
ESDU 99016 A-2000 Example of statistical analysis of wet runway friction: aircraft with extensive set of test data.

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., count analysis board

IEEE 1F-1958 Report on Guide for STATISTICAL ANALYSIS OF TEST DATA
IEEE 930-1987 Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data
IEEE 101-1972 GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA (R 1982)

GB-REG, count analysis board

REG NASA-LLIS-1302-2002 Lessons Learned ?Science Data Analysis Program

Association Francaise de Normalisation, count analysis board

NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
NF ISO 8784-2:2023 Pâtes, papiers et cartons - Analyse microbiologique - Partie 2 : dénombrement des bactéries, des levures et des moisissures en surface
NF ISO 8784-3:2022 Pâtes, papiers et cartons - Analyse microbiologique - Partie 3 : dénombrement des levures et des moisissures basé sur la désintégration
NF ISO 8784-1:2015 Pâte, papier et carton - Analyse microbienne - Partie 1 : dénombrement des bactéries et des spores bactériennes basé sur la désintégration
FD V03-116:2001 Analyse des produits agricoles et alimentaires - Guide d'application des données métrologiques
NF EN ISO 12213-2:2009 Gaz naturel - Calcul du facteur de compression - Partie 2 : calcul à partir de l'analyse de la composition molaire
NF EN ISO 20501:2022 Céramiques techniques - Analyse statistique de Weibull des données de résistance à la rupture
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF X20-702:1986 PERSONAL BREATH ANALYSER. ESTIMATION OF ALCOHOL IMPREGNATION BY ANALYSIS OF EXPELLED AIR.
NF EN 12896-8:2019 Transports publics - Modèle de données de référence - Partie 8 : tableaux de bord et statistiques
FD T90-465-2:2019 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 2 : technical enumeration
NF EN 61182-7:1996 Cartes imprimées - Description et transmission de données informatiques - Partie 7 : codification sous forme numérique des données du test électrique sur carte nue.
NF X20-104:2015 Gas analysis - Purity analysis and the treatment of purity data
NF ISO 19229:2019 Analyse des gaz - Analyse de pureté et traitement des données de pureté
FD A06-002*FD CEN/TR 10345:2014 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
NF Q03-082:1984 Paper and board. Paper, board, corrugated board and their components. Determination of the coefficient of static friction and'estimation of the coefficient of dynamic friction (dynamometer method).
NF EN ISO 8589:2010 Analyse sensorielle - Directives générales pour la conception de locaux destinés à l'analyse
NF X20-104*NF ISO 19229:2019 Gas analysis - Purity analysis and the treatment of purity data
NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
NF A05-125*NF ISO 14802:2012 Corrosion of metals and alloys - Guidelines for applying statistics to analysis of corrosion data
NF T01-021:1974 Thermal analysis . Vocabulary. Reporting data.
NF M03-050:1993 Coal and coke. Calculation of analysis to different bases.
NF Q34-101*NF EN 17545:2021 Paper and board - Determination of composition of paper and board for recycling by gravimetric analysis
NF EN 17545:2021 Papiers et cartons - Détermination de la composition des papiers et cartons pour recyclage par analyse gravimétrique
NF EN ISO 8589/A1:2014 Analyse sensorielle - Directives générales pour la conception de locaux destinés à l'analyse - Amendement 1
NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.
NF R19-501-7:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 7 : particle sizing and counting by microscopic analysis.
NF V09-019*NF ISO 11056:2021 Sensory analysis - Methodology - Magnitude estimation method
NF ISO 11056:2021 Analyse sensorielle - Méthodologie - Méthode d'estimation de la grandeur
FD V09-503:2022 Analyse sensorielle - Mesure des performances d'un jury, ou plusieurs jurys, réalisant des profils sensoriels quantatifs

IT-UNI, count analysis board

UNI ISO 20391-2:2021 Biotechnology - Cell counting - Part 2: Experimental design and statistical analysis to quantify counting method performance
UNI 4632-1960

Korean Agency for Technology and Standards (KATS), count analysis board

KS J ISO 20391-2:2021 Biotechnology — Cell counting — Part 2: Experimental design and statistical analysis to quantify counting method performance
KS I ISO 12213-2-2010(2016) Natural gas－Calculation of compression factor－Part 2：Calculation using molar-composition analysis
KS I ISO 12213-2-2010(2021) Natural gas－Calculation of compression factor－Part 2：Calculation using molar-composition analysis
KS M ISO 9184-7:2007 Paper, board and pulps－Fibre furnish analysis－Part 7：Determination of weight factor
KS B ISO 12107:2004 Metallic materials－Fatigue testing－Statistical planning and analysis of data
KS B ISO 12107-2004(2019) Metallic materials－Fatigue testing－Statistical planning and analysis of data
KS M ISO 9184-7:2017 Paper, board and pulps－Fibre furnish analysis－Part 7：Determination of weight factor
KS I ISO 19229-2017(2022) Gas analysis — Purity analysis and the treatment of purity data
KS B ISO 3938:2007 Hydraulic fluid power－Contamination analysis－Method for reporting analysis data
KS I ISO 19229:2017 Gas analysis — Purity analysis and the treatment of purity data
KS B ISO 3938-2007(2012) Hydraulic fluid power－Contamination analysis－Method for reporting analysis data
KS M ISO 8784-1:2008 Plup, paper and board-Microbiological examination-Part 1:Total count of bacteria, yeast and mould based on disintegration
KS D ISO 9042-2002(2012) Steels－Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
KS I ISO 8466-1-2008(2013) Water quality－Calibration and evaluation of analytical methods and estimation of performance characteristics (Statistical evaluation of the linear calibration function)
KS E ISO 1170:2013 Coal and coke — Calculation of analyses to different bases
KS Q ISO 11056:2003 Sensory analysis-Methodology-Magnitude estimation method
KS E ISO 1170:2003 Coal and coke-Calculation of analyses to different bases
KS Q ISO 11056-2014(2019) Sensory analysis — Methodology — Magnitude estimation method
KS Q ISO 8589-2014(2019) Sensory analysis — General guidance for the design of test rooms
KS Q ISO 11056:2014 Sensory analysis — Methodology — Magnitude estimation method

KR-KS, count analysis board

KS J ISO 20391-2-2021 Biotechnology — Cell counting — Part 2: Experimental design and statistical analysis to quantify counting method performance
KS Q ISO 16269-8-2009 Statistical interpretation of data－Part 8：Determination of prediction intervals
KS M ISO 9184-7-2017 Paper, board and pulps－Fibre furnish analysis－Part 7：Determination of weight factor
KS I ISO 19229-2017 Gas analysis — Purity analysis and the treatment of purity data

U.S. Military Regulations and Norms, count analysis board

ARMY MIL-C-62207 B NOTICE 1-1996 CIRCUIT CARD ASSEMBLY: 11743667 DIGITAL TO ANALOG CONVERTER
ARMY MIL-C-62207 B (2)-1993 CIRCUIT CARD ASSEMBLY: 11743667 DIGITAL TO ANALOG CONVERTER
ARMY MIL-C-62207 B-1981 CIRCUIT CARD ASSEMBLY: 11743667 DIGITAL TO ANALOG CONVERTER

American Society for Testing and Materials (ASTM), count analysis board

ASTM E1049-85(1997) Standard Practices for Cycle Counting in Fatigue Analysis
ASTM E1970-11 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1049-85(2017) Standard Practices for Cycle Counting in Fatigue Analysis
ASTM E1561-93(1998) Standard Practice for Analysis of Strain Gage Rosette Data
ASTM G166-00(2011) Standard Guide for Statistical Analysis of Service Life Data
ASTM E1561-93(2014) Standard Practice for Analysis of Strain Gage Rosette Data
ASTM G16-95(2004) Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G166-00 Standard Guide for Statistical Analysis of Service Life Data
ASTM G166-00(2005) Standard Guide for Statistical Analysis of Service Life Data
ASTM E1049-85(2005) Standard Practices for Cycle Counting in Fatigue Analysis
ASTM G16-95(2010) Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM E1561-20 Standard Practice for Analysis of Strain Gage Rosette Data
ASTM G166-00(2020) Standard Guide for Statistical Analysis of Service Life Data
ASTM E1970-00 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1970-01 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM G172-03(2010) Standard Guide for Statistical Analysis of Accelerated Service Life Data
ASTM E1970-23 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1970-16(2021) Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1970-16 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM G16-13 Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G16-13(2019) Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G172-03 Standard Guide for Statistical Analysis of Accelerated Service Life Data
ASTM G172-19 Standard Guide for Statistical Analysis of Accelerated Service Life Data
ASTM E1970-06 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM G16-71(1984) Standard Practice for Applying Statistics to Analysis of Corrosion Data
ASTM G172-02(2010)e1 Standard Guide for Statistical Analysis of Accelerated Service Life Data
ASTM D4583-21 Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
ASTM E1323-89(2002) Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1323-15 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM D5465-93(2004) Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
ASTM D4583-95(2009) Standard Practice for Carbon Black8212;Calculation of Process Indexes From an Analysis of Process Control Data
ASTM E2563-18 Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method
ASTM D4583-95(2004) Standard Practice for Carbon Black8212;Calculation of Process Indexes From an Analysis of Process Control Data
ASTM E1503-97 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM D7416-09 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
ASTM E2563-23 Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method
ASTM E1948-98(2004) Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1947-98 Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1947-98(2004) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1948-98 Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1948-98(2009) Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1947-98(2014) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1948-98(2014) Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1947-98(2009) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
ASTM UOP624-14 Carbonyl Number by Chemical Analysis
ASTM D5465-93(1998) Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
ASTM D5465-93(2012) Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
ASTM E791-90(2004) Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM E791-90(1996) Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM E791-08(2016) Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM E1947-98(2022) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
ASTM D7416-09(2015) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Vis
ASTM D7416-09(2020) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
ASTM E1503-05 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM F2888-13 Standard Test Method for Platelet Leukocyte Count—An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials
ASTM D5877-95(2000) Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations
ASTM E1323-89(1994)e1 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1503-97(2004) Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM E1323-15(2020) Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM D7416-08 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
ASTM E2563-07 Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method
ASTM C1500-02 Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
ASTM E1323-09 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

International Organization for Standardization (ISO), count analysis board

ISO 20391-2:2019 Biotechnology — Cell counting — Part 2: Experimental design and statistical analysis to quantify counting method performance
ISO/IEC 20968:2002 Software engineering - Mk II function point analysis - Counting practices manual
ISO 12107:2012 Metallic materials - Fatigue testing - Statistical planning and analysis of data
ISO 12107:2003 Metallic materials - Fatigue testing - Statistical planning and analysis of data
ISO 9184-7:1994 Paper, board and pulps - Fibre furnish analysis - Part 7: Determination of weight factor
ISO 9276-5:2005 Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
ISO 19229:2015 Gas analysis - Purity analysis and the treatment of purity data
ISO 19229:2019 Gas analysis — Purity analysis and the treatment of purity data
ISO 8553:2004 | IDF 131:2004 Milk — Enumeration of microorganisms — Plate-loop technique at 30 degrees C
ISO 14802:2012 Corrosion of metals and alloys - Guidelines for applying statistics to analysis of corrosion data
ISO 3938:1986 Hydraulic fluid power; Contamination analysis; Method for reporting analysis data
ISO/DIS 9042:2023 Steels — Point counting method for statistically estimating the volume fraction of a constituent with a point grid
ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO/IEC 25436:2006 Information technology - Eiffel: Analysis, Design and Programming Language
ISO/TS 12913-3:2019 Acoustics — Soundscape — Part 3: Data analysis
ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
ISO 8589:1988 Sensory analysis; general guidance for the design of test rooms

TH-TISI, count analysis board

TIS 2180-2004 Statistical planning and analysis of data for fatigue testing of metallic materials.[iso title: metallic materials.fatigue testing.statistical planning and analysis of data]

CZ-CSN, count analysis board

CSN 56 0085-1986 Food products numeration o? coliform acteria - plate count technique
CSN 83 0521 Cast.6-1976 Microbiological analysis of drinking water. Count of Enterococci colonies
CSN 83 0521 Cast.4-1976 Microbiological analysis of drinking water. Total plate count at 37 "C
CSN 83 0531 Cast.5-1978 Microblological analysis of surface water Total plate count at 20 °C
CSN 83 0531 Cast.4-1978 Microbiological analysis of surface water Total plate count at 37°C
CSN 73 0209-1986 Accuracy oí geometrical parameters in building. Statistical accuracy analysis
CSN 01 0230-1987 Applied statistics. Analysis of variance
CSN 50 0370-1970 Paper and boarcl testijig. Fiber analysis of páper and paperboard
CSN 44 6412-1988 Design of water dams for mines. Stress analysis
CSN 42 0605 Cast.1-1972 Chemical analysis of silícon. General data.

Institute of Electrical and Electronics Engineers (IEEE), count analysis board

IEEE 101-1987 Guide for the Statistical Analysis of Thermal Life Test Data
IEEE 930-2004 Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
IEEE/ANSI 101-1987 IEEE Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/IEEE Std 101-1987(R2010) IEEE Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/IEEE Std 930-1987 IEEE Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data
AIEE No 1F-1958 AIEE Report on Guide for Statistical Analysis of Test Data
IEEE Std 930-2004 (Replaced) IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
IEC 62539:2007*IEEE 930:2023 IEC/IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data (Adoption of IEEE Std 930-2004)
IEC 62539 First Edition 2007-07 IEEE 930 IEC/IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data (Adoption of IEEE Std 930-2004)
IEEE/IEC 62539-2007 IEC 62539 Ed.1 (IEEE Std 930 (TM)-2004): Guide for the Statistical Analysis of Electrical Insulation Breakdown Data

Society of Automotive Engineers (SAE), count analysis board

SAE J2748-2006 VHDL-AMS Statistical Analysis Packages
SAE AS5506B-2012 Architecture Analysis & Design Language (AADL)
SAE AS5506C-2017 Architecture Analysis & Design Language (AADL)
SAE AS5506D-2022 Architecture Analysis & Design Language (AADL)
SAE ARP926-1967 DESIGN ANALYSIS PROCEDURE FOR FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS (FMECA)
SAE AIR1823A-1996 (R) Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS
SAE AIR1823A-2003 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

ITE - Institute of Transportation Engineers, count analysis board

LP-352-1978 Statistics with Application to Highway Traffic Analyses
LP-558-1999 Statistical Methods in Transportation and Safety Data Analysis for Highway Geometry@ Design@ and Operations
LP-452-1997 Traffic Records@ Accident Prediction and Analysis@ and Statistics
LP-639-2001 Statistical Methods in Highway Safety Analysis
LP-637-2001 Highway Safety-Modeling@ Analysis@ Management@ Statistical

Professional Standard - Ferrous Metallurgy, count analysis board

YB/T 4142-2006 Statistical rules for processing spectral analysis data

European Committee for Standardization (CEN), count analysis board

EN 1325-1:1996 Value Management, Value Analysis and Functional Analysis Vocabulary - Part 1: Value Analysis and Functional Analysis
EN 1325-2:2004 Value Management, Value Analysis, Functional Analysis vocabulary - Part 2: Value Management
EN ISO 12213-2:2005 Natural gas ?Calculation of compression factor ?Part 2: Calculation using molar-composition analysis
CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
PD CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
FprEN 17545-2021 Paper and board - Determination of composition of paper and board for recycling by gravimetric analysis
FprEN 15786-2021 Animal feeding stuffs: Methods of sampling and analysis - Isolation and enumeration of Pediococcus spp. used as feed additive
FprEN 15787-2021 Animal feeding stuffs: Methods of sampling and analysis - Isolation and enumeration of Lactobacillus spp. used as feed additive
FprEN 15784-2021 Animal feeding stuffs: Methods of sampling and analysis - Isolation and enumeration of Bacillus spp. used as feed additive

ACI - American Concrete Institute, count analysis board

ACI SP-101-1987 Computer Use for Statistical Analysis of Concrete Test Data (Out of Print)
ACI SP-287 CD-2012 Recent Development in Reinforced Concrete Slab Analysis@ Design@ and Serviceability
ACI SP-306-2016 Analytical and Finite Element Concrete Material Models - Comparison of Blast Response Analysis of One Way Slabs with Experimental Data

ZA-SANS, count analysis board

SANS 132:2009 Coal and coke - Calculation of analyses to different bases
SANS 5117:2005 Textiles - Formulae used in statistical analysis
SANS 132:1977 Coal and coke - Calculation of analyses to different bases

Standard Association of Australia （SAA）, count analysis board

AS/NZS ISO/IEC 20968:2004 Software engineering - Mk II Function Point Analysis - Counting Practices Manual
AS ISO 16269.7:2004 Statistical interpretation of data - Median - Estimation and confidence intervals
AS 4276.3.1:1995 Water microbiology Method 3.1:Heterotrophic colony count methods - Pour plate method using plate count agar
AS ISO 11453:2004 Statistical interpretation of data - Tests and confidence intervals relating to proportions

API - American Petroleum Institute, count analysis board

API REPORT 90-56-1993 Analysis Cylindrical Shell Database and Validation of Design Formulations
API REPORT 92-56-1995 Analysis of Cylindrical Shell Database and Validation of Design Formulations (Phase 2: for D/t Values > 300)
API PUBL 310-1997 Analysis of Refinery Screening Data

PT-IPQ, count analysis board

AT-ON, count analysis board

ONORM N 2502-1994 Microbiological analysis of milk and milk products - Enumeration of colrforms (Colony count technique at 30 °C)
ONORM N 2504-1994 Microbiological analysis of milk and milk products - Enumeration of microorganisms (Colony count technique at 30 °C) - Reference method
ONORM M 6245-1997 Water analysis - Summary of methods - Limits of detection, fields of application, Statistical data
ONORM N 2503-1994 Microbiological analysis of milk and milk products - Enumeration of yeasts and moulds
ONORM M 6600-1992 Water analysis - Statistical methods in water analysis - Terms and definitions
ONORM M 6613-2001 Water analysis - Photometric determination of aluminium

Professional Standard - Hygiene , count analysis board

WS/T 244-2005 Reference method for platelet counting

Taiwan Provincial Standard of the People's Republic of China, count analysis board

CNS 7388-1981 Method for Analysis of Radioisotopes - Gross Beta Particle Count
CNS 3949-1976 Calibration and Caculation of Gas Chromatography
CNS 14388-1999 Weibull statistics for strength data of fine ceramics
CNS 8867-1982 Glass Liquid Volumeters for Chemical Analysis
CNS 2312-1974 Control Chart Method of Analyzing Data

工业和信息化部, count analysis board

SJ/T 11618-2016 Software Engineering MK II Function Point Analysis and Counting Practical Guide

Professional Standard - Commodity Inspection, count analysis board

SN 0168-1992 Plate count for bacterial colonies in foodfor export
SN/T 3466-2013 Plate count for bacterial colonies in food for export.Membrane filter method
SN/T 1059.3-2002 Plate count for bacerial colonies in food for import and export.Membrane filter method

Aeronautical Radio Inc., count analysis board

ARINC 573-7 SEC 7.0 Flight Data Entry Panel Design
ARINC 573-7 SEC 7.0-1974 Flight Data Entry Panel Design
ARINC 717-10 ITEM 8.0 Flight Data Entry Panel Design (FDEP)

AENOR, count analysis board

UNE 20512-8:1978 GUIDE FOR THE STATISTICAL ANALYSIS OF AGEING DATA. METHODS BASED ON MEAN VALUES OF NORMALLY DISTRIBUTED TEST DATA
UNE-EN ISO 12213-2:2010 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)
UNE 87030:2002 Sensory analysis. Methodology. Magnitude estimation method.

IPC - Association Connecting Electronics Industries, count analysis board

IPC/JEDEC-9301-2018 Numerical Analysis Guidelines for Microelectronics Packaging Design and Reliability
IPC D-352 CD-1985 Electronic Design Data Description for Printed Boards in Digital Form
IPC D-352-1985 Electronic Design Data Description for Printed Boards in Digital Form
IPC 7912-2000 Calculation of DPMO and Manufacturing Indices for Printed Board Assemblies
IPC TM-650 2.3.28A-2004 Ionic Analysis of Circuit Boards@ Ion Chromatography Method
IPC TM-650 2.3.28B-2012 Ionic Analysis of Circuit Boards@ Ion Chromatography Method

国家市场监督管理总局、中国国家标准化管理委员会, count analysis board

GB/T 40005-2021 Weibull statistics for strength data of fine ceramics
GB/T 40796-2021 Corrosion of metals and alloys—Guidelines for applying statistics to analysis of corrosion data
GB/T 4688-2020 Paper，board and pulp—Analysis of fiber furnish

Zhejiang Provincial Standard of the People's Republic of China, count analysis board

DB33/T 2571-2023 Non-inductive monitoring of the business environment and the application of data calculation and analysis

National Metrological Verification Regulations of the People's Republic of China, count analysis board

JJG 778-2005 Noise Level Statistical Analyzers
JJG 778-2019 Noise Level Statistical Analyzers
JJG 552-1988 Verification Regulation of the Chambers for Counting Blood Cells
JJG(邮电) 044-1998 SDH Digital Transmission Analyzer
JJG 778-1992 Verification Regulation of Noise Level Statistical Analyzers

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, count analysis board

GB/T 33772.1-2017 Quality assessment systems—Part 1: Registration and analysis of defects on printed board assemblies

Japanese Industrial Standards Committee (JISC), count analysis board

JIS K 0115:2004 General rules for molecular absorptiometric analysis
JIS K 0115:1992 General rules for molecular absorptiometric analysis
JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
JIS P 8120:1998 Paper, board and pulps -- Fibre furnish analysis

Professional Standard-Ships, count analysis board

CB/Z 351-1995 Statistical analysis method for low cycle fatigue test data of ship materials

HU-MSZT, count analysis board

Lithuanian Standards Office , count analysis board

LST EN ISO 12213-2:2010 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)

US-FCR, count analysis board

FCR VA 01 32 16.16-2012 NETWORK ANALYSIS SCHEDULES (DESIGN-BUILD ONLY)
FCR COE EM 1110-2-1904-1953 SOIL MECHANICS DESIGN SETTLEMENT ANALYSIS
FCR UFGS-01 32 17.00 20-2015 COST-LOADED NETWORK ANALYSIS SCHEDULES (NAS)
FCR COE ETL 1110-2-274-1982 ENGINEERING AND DESIGN FLOOD RISK ANALYSIS
FCR COE ER 1110-1-1401-1989 INTERLABORATORY TESTING PROGRAM FOR CHEMICAL ANALYSES
FCR COE ETL 1110-8-7-1991 COMPUTATION OF SALINITY INTRUSION BY ONE-DIMENSIONAL ANALYSIS
FCR COE EM 200-1-3-2001 REQUIREMENTS FOR THE PREPARATION OF SAMPLING AND ANALYSIS PLANS

VN-TCVN, count analysis board

TCVN 4551-2009 Applied statistics.Analysis of variances
TCVN 3980-2001 Paper, board and pulps.Fibre furnish analysis
TCVN 4884-1-2015 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms .Part 1: Colony count at 30 degrees C by the pour plate technique

The American Road & Transportation Builders Association, count analysis board

AASHTO HB-17 DIVISION I-A SEC 4-2002 Division I-A Seismic Design - Analysis Requirements
AASHTO HDG CHAPTER 6-2007 HYDRAULIC ANALYSIS AND DESIGN OF OPEN CHANNELS 4th edition
AASHTO HDG CHAPTER 7-2007 HYDRAULIC ANALYSIS FOR THE LOCATION AND DESIGN OF BRIDGES 4th edition

ESD - ESD ASSOCIATION, count analysis board

EP111-2002 ESD DESIGN & ANALYSIS HANDBOOK

Group Standards of the People's Republic of China, count analysis board

T/HBFIA 0031-2022 Chromogenic plate counting method for the determination of the total number of bacterial colonies in water
T/GDBX 070-2023 The data statistical analysis method for the hydrogen running mileage of hydrogen fuel cell vehicles
T/CESA 1102.3-2020 Enterprise informatization-Display panels-Part 3： Framework requirement of engineering data analysis systerm
T/IGRS 0011.5-2021 Quality analysis of internet terminal product based on big data Part Ⅴ: Data analysis
T/CHIA 21.5-2021 Specification of omics sample processing and data analysis Part 5:transcriptome sequencing data analysis
T/CA 224-2022 E-sports data analyst
T/QGCML 1802-2023
T/CBMF 67-2019 Determination of gypsum phase content in gypsum board and gypsum floor
T/CHIA 21.1-2021 Specification of omics sample processing and data analysis Part 1:whole genome sequencing analysis
T/CHIA 21.2-2021 Specification of omics sample processing and data analysis Part 2:whole exome sequencing data analysis
T/CEC 178-2018 Statistical analysis specification for power system communication

IN-BIS, count analysis board

International Dairy Federation (IDF), count analysis board

IDF 131-2004 Milk - Enumeration of microorganisms - Plate-loop technique at 30℃

U.S. Air Force, count analysis board

AIR FORCE A-A-59830-2009 ANALYZER, DIGITAL COMMUNICATION
AIR FORCE A-A-58042 A-1996 ANALYZER, DIGITAL DATA, ELECTRONIC TEST
AIR FORCE A-A-58042 A VALID NOTICE 1-2012 Analyzer, Digital Data, Electronic Test

BELST, count analysis board

STB 1923-2008 System of ensuring geometrical рarameters accuracy in construction. Statistical analysis of accuracy

GOSTR, count analysis board

GOST R 58946-2020 System of ensuring geometrical parameters accuracy in construction. Statistical analysis of accuracy

BE-NBN, count analysis board

NBN B 62-002-1987
NBN 681 F-1966
NBN T 01-102-1984 Layouts for standards - Standard for chemical analysis

国家药监局, count analysis board

YY/T 1649.1-2019 Medical device and platelet interaction testing Part 1: In vitro platelet counting method

Professional Standard - Traffic, count analysis board

JT/T 1006.2-2015 Transportation statistics,analysis, monitoring and investment plan management information system.Part 2: Data exchanging contents

FI-SFS, count analysis board

SFS-ISO 7937 E:1987 This standard is approved in English

American Gear Manufacturers Association, count analysis board

AGMA 06FTM11-2006 On Tooth Failure Analysis in Small--Teeth--Number Gearing: An Analytical Approach

International Telecommunication Union (ITU), count analysis board

ITU-R REPORT P.2089-2006 The analysis of radio noise data
ITU-T Q.155-1989 Analysis of Digital Information for Routing - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 1 pp

Universal Oil Products Company (UOP), count analysis board

UOP 624-2014 Carbonyl Number by Chemical Analysis

Professional Standard - Energy, count analysis board

NB/T 20567-2019 Nuclear power plant meteorological observation system construction and technical specifications for data statistical analysis

Professional Standard - Chemical Industry, count analysis board

HG/T 20516-2014 Design code for analyzer room
HG/T 20516-2000 Design code for analyzer room
HG/T 20516-2000（条文说明） Automatic Analyzer Room Design Regulations

IX-SA, count analysis board

SAE - SAE International, count analysis board

SAE AS5506A-2009 Architecture Analysis & Design Language (AADL)
SAE AS5506-2004 ARCHITECTURE ANALYSIS & DESIGN LANGUAGE (AADL)
SAE R-367-2012 Analysis Techniques for Racecar Data Acquisition
SAE AIR1823B-2011 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

AASHTO - American Association of State Highway and Transportation Officials, count analysis board

HB-17 DIVISION I-A SEC 4-2002 Division I-A Seismic Design - Analysis Requirements
HDG CHAPTER 6-2007 HYDRAULIC ANALYSIS AND DESIGN OF OPEN CHANNELS (4th edition)

IX-ECMA, count analysis board

ECMA 367-2006 Eiffel: Analysis, Design and Programming Language

Professional Standard - Geology, count analysis board

DZ/T 0064.88-2021 Methods of Analytical Groundwater Quality Part 88: Determination of 14C Synthetic Benzene - Liquid Scintillation Counting Method

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, count analysis board

REPORT P.2089-2006 The analysis of radio noise data

Association of German Mechanical Engineers, count analysis board

VDI 2803 Blatt 1-1996 Function analysis - Fundamentals and method

Professional Standard - Aerospace, count analysis board

QJ 2702-1995 Modular grids of 0.5mm and 2.5mm for design layout panels
QJ 1210-1987 Method of Analysis for Printed Board Hole Metallization Solution

US-Unspecified Preparing Activity, count analysis board

DI-NUOR-81408-1994 AIRCRAFT MONITOR AND CONTROL (AMAC) DESIGN ANAYSIS REPORT
DI-SESS-81902-2013 LEVEL OF REPAIR ANALYSIS (LORA) DATA TABLES

ES-UNE, count analysis board

UNE-ISO/TS 8000-81:2023 Data quality — Part 81: Data quality assessment: Profiling
UNE-ISO 11056:2018 Sensory analysis -- Methodology -- Magnitude estimation method

Professional Standard - Agriculture, count analysis board

GB/T 462-2023 Determination of moisture content of analytical samples of paper, paperboard and pulp

US-ACEI, count analysis board

IPC TM-650 2.3.28-1995 Ionic Analysis of Circuit Boards Ion Chromatography Method

Institute of Environmental Sciences and Technology, count analysis board

IEST RD-DTE046.1-2011 Terms Commonly Used in the Digital Analysis of Dynamic Data

Military Standards (MIL-STD), count analysis board

DOD MIL-T-89304 ADMIN NOTICE 1-2004 TACTICAL TERRAIN ANALYSIS DATA BASE (TTADB)
DOD MIL-T-89304 (1)-1992 TACTICAL TERRAIN ANALYSIS DATA BASE (TTADB)
DOD MIL-T-89304-1990 TACTICAL TERRAIN ANALYSIS DATA BASE (TTADB)

TR-TSE, count analysis board

TS 752-1969 CHEMICAL ANALYSIS OF ZINC PHOTOMETRIC DETERMINATION OF IRON

Professional Standard - Urban Construction, count analysis board

CJ/T 3018.14-1993 Leachate.Detecton of total bacteria number.plate count for bacteria colonies

PH-BPS, count analysis board

PNS ISO 11056:2021 Sensory analysis - Methodology - Magnitude estimation method

YU-JUS, count analysis board

JUS U.C4.005-1991 Designfng and construction ofroads. Preliminar/ analysis

CU-NC, count analysis board

NC 90-06-44-1986 Metrological Assurance. Analytical Balances. Measurement Methods

National Metrological Technical Specifications of the People's Republic of China, count analysis board

JJF 1024-1991 Technical Norm of Reliability Analysis Principle for Measuring Instruments

PL-PKN, count analysis board

PN P04870-1990 Textiles Statistical analysis of testing results

Professional Standard - Aviation, count analysis board

HB/Z 112-1986 Statistical Analysis Method for Material Fatigue Test

中国人民银行, count analysis board

JR/T 0217-2021 Payment information statistical analysis message specifications

WRC - Welding Research Council, count analysis board

BULLETIN 221-1976 ANALYSIS OF TEST DATA ON PVRC SPECIFICATIONS NO.3@ ULTRASONIC EXAMINATION OF FORGINGS@ REVISIONS I AND II; ANALYSIS OF THE NONDESTRUCTIVE EXAMINATION OF PVRC PLATE-WELD SPECIMEN 251J – PART A