ZH
RU
ES

Binding peak detection

Binding peak detection, Total:499 items.

In the international standard classification, Binding peak detection involves: Non-ferrous metals, Non-destructive testing, Powder metallurgy, Thermodynamics and temperature measurements, Organic chemicals, Fluid storage devices, Materials for aerospace construction, Installations in buildings, Quality, Adhesives, Electronic components in general, Construction industry, Measurement of volume, mass, density, viscosity, Construction equipment, Structures of buildings, Testing of metals, Farming and forestry, Rubber, Plastics, Mechanical testing, Components for aerospace construction, Construction materials, Applications of information technology, Veterinary medicine, Elements of buildings, Civil engineering in general, Road engineering, Bridge construction, Power transmission and distribution networks, Refractories, Water quality, Non-metalliferous minerals, Animal feeding stuffs, Buildings, Construction of railways, Microbiology, Metrology and measurement in general, Metalliferous minerals, Welding, brazing and soldering, Raw materials for rubber and plastics, Jewellery, Company organization and management, Machine tools, Ferrous metals, Diagnostic, maintenance and test equipment, Wood-based panels, Sports equipment and facilities, Medical sciences and health care facilities in general, Shipbuilding and marine structures in general, Fuels, Protection of and in buildings, Earthworks. Excavations. Foundation construction. Underground works, Terminology (principles and coordination), Acoustics and acoustic measurements, Equipment for the rubber and plastics industries, Road vehicles in general, Air quality, Vibrations, shock and vibration measurements, Paper and board, Tunnel construction, Components and accessories for telecommunications equipment, Graphic technology, Heat treatment, Bearings, Space systems and operations, Software development and system documentation, Glass, Vocabularies, Food products in general, Mining and quarrying, Electrical and electronic testing, Integrated Services Digital Network (ISDN).

Group Standards of the People's Republic of China, Binding peak detection

T/DJPEC 0001-2019 Specification for inspection of ice quality, peak value, condensation and abnormality of small ice making machine
T/GDCKCJH 053-2021 Temperature performance requirements and test method for tunnel furnace of reflow soldering & wave soldering
T/CSTM 00270-2020 X-Ray Digital Radiography for composite sandwich structure
T/CECS 1103-2022 Engineering Bamboo Structure Testing Standard
T/CECS 1056-2022 Technical specification for detecting defects of concrete joint surface by phased array ultrasonic method
T/CDSA 305.21-2017 Guidance for underwater inspection of underwater steel structure
T/CSTM 00271.2-2020 Civilian aircraft structures reference blocks for in-situ non-destructive testing-Part 2: Reference blocks for composite structures
T/CASAS 013-2021 Measuring method for testing the density of dislocation in SiC crystal Combined KOH etching and image recognition methods
T/CECS 933-2021 Industrial Corridor Structure Inspection and Appraisal Standard
T/CSCS 032-2022 Rack steel structure testing and evaluation standards
T/CSCS 036-2023 General standard for inspection and appraisal of steel structures
T/CECS 1189-2022 Testing standards for prefabricated concrete structures
T/CECS 714-2020 Technical standard for inspection of wooden structures of ancient buildings
T/CECS 505-2018 Fiber Bragg grating structural vibration testing and monitoring standards
T/CDSA 305.19-2017 Recommended practice of inspection point plan for underwater structure
T/CEC 568-2021 SF6/N2 mixed gas mixture ratio detector calibration and on-site detection method
T/CDSA 305.18-2017 Operating procedure of flooded member detection for underwater steel structure
T/CSPSTC 43-2019 Technical specification for health monitoring of metro underground structure
T/QGCML 2033-2023
T/CAQI 77-2019 Synthetic Diamond Detection Methods
T/CAQI 157-2020 Guidelines of compliance evaluation for inspection body and laboratory
T/HSCA 001-2018 Regulation for Testing and Evaluation of Steel Structure in Stadium
T/CHATA 008-2020 Diagnosis process for etiology negative pulmonary tuberculosis
T/CECS G J61-01-2021 Standards for Rapid Inspection of Highway Tunnel Lining Structures
T/CECS 499-2018 Technical specification for detection and reinforcement of steel mast structure
T/SXCAA 006-2019 Measuring Equipment Verification/Calibration Result Confirmation Specification
T/SEDTA 001-2023 Technical standard for leak detection of foundation pit enclosure structure
T/CECS 499-2201 Technical specification for detection and reinforcement of steel mast structure
T/CSCS 29-2022 Standards for testing and identification of steel structures for temporary buildings
T/ZZXJX 124-2022 Testing technical standards for prefabricated concrete structures
T/SDAS 241-2021 Regulations for investigation and detection of cucumber root-knot nematodes in facilities
T/CECS 1378-2023 Standards for inspection and appraisal of industrial heritage building structures
T/CSCS 041-2023 Technical standards for inspection and appraisal of industrial steel structures
T/CSCS 045-2023 Technical standards for inspection and identification of space steel structures
T/CSCS 037-2023 Technical standards for inspection and appraisal of high-rise steel structures
T/GSQA 010-2020 Lanzhou lily fresh product inspection and testing operation specification
T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/CITS 0016-2023 Electronic and electrical appliances inspection and testing institution — Guide for evaluating qualified suppliers of testing equipment
T/CISA 199-2022 Intelligent predictive detection method for the mechanical properties of carbon structural steel and low-alloy high-strength structural steel plates and strips in the iron and steel industry
T/CALAS 84-2020 Laboratory animal-Detection method of swine maternal genetic structure
T/CECS G:J50-01-2019 Technical Specification for Non-destructive Testing of Bridge Concrete Structure
T/QGCML 862-2023 Technical specification for steel structure ultrasonic testing and analysis system
T/CSEE 0239-2021 Technical regulations for inspection and evaluation of cable channel structure
T/CECS G-J50-01-2019 Technical specification for non-destructive testing of bridge concrete structures
T/CECS 1114-2022 Technical regulations for digital image detection of engineering structures
T/HACE 018-2023 Occupationalstandards for steel structure testing personnelof construction engineering
T/CECS 10320-2023 Urban rail transit tunnel structural disease detection vehicle
T/GDPRA 002-2020 Requirementsofbondingperformanceandtestmethodofadhesiveappliedto foldingcartons
T/CMA JD043-2021 Method and Illustration of Uncertainty Evaluation Test Result for Vehicle Inspection Body
T/SZAS 27-2020 Guideline for the construction of the inflatable membrane structure virus detection laboratory
T/CDSA 305.22-2017 Operating procedure for alternating current field measurement(ACFM) technique for underwater steel structure
T/GDSM 002-2020 Information system for measuring data and result processing
T/CSTM 00150-2020 Corrosion-resistant testing method for sintered glass powder products
T/QGCML 861-2023 Technical specification for the application of bridge structure inspection and analysis software
T/CECS 914-2021 Test standard for bond strength of facing stone in construction engineering
T/CECS 1128-2022 Safety testing and evaluation standards for fixed structures of amusement facilities
T/CSTM 00674-2023 Non-destructive testing—Steel products—Automatic testing of wate-jet coupling ultrasonic for seamless steel tube

Korean Agency for Technology and Standards (KATS), Binding peak detection

KS D ISO 2741:2012 Zinc alloys－Complexometric determination of magnesium
KS M 1936-2002 Benzene-Determination of crystallizing point
KS D 0210-1992(2022) MacroStructure Detecting Method for Steel
KS B 0521-1994 Methods of ultrasonic angle beam testing and classification of test results for welds of aluminium pipes and tubes
KS B 0522-1994 Method of ultrasonic testing and classification of test results for T type welds in aluminium plates
KS F 2761-2016 Measurement of the adhesion of structural bonding agent for the concrete
KS B ISO 22825-2006(2011) Non-destructive testing of welds－Ultrasonic testing－Testing of welds in austenitic steels and nickel-based alloys
KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS D ISO 4489-2001(2011) Sintered hardmetals-Sampling and testing

国家市场监督管理总局、中国国家标准化管理委员会, Binding peak detection

GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
GB/T 36212-2018 Non-destructive testing—Acoustic testing method and evaluation for the cement bond of underground metal component
GB/T 40732-2021 Non-destructive testing of welds—Ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys
GB/T 38720-2020 Microstructure examination of medium-carbon steel and medium-carbon alloy structural steel after quenching
GB/T 18329.4-2021 Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm
GB/T 36594-2018 Method of ultrasonic inspection for cemented carbide
GB/T 37784-2019 In-situ test method for detection of structural risk of the insulating glass
GB/T 27423-2019 Conformity assessment—Guide to risk management for inspection and testing services

YU-JUS, Binding peak detection

JUS C.N3.002-1990 Sintered hardoet?la. Ssmpling and testlog
JUS G.E2.312-1983 Steel cord conveyor belts-cable to coating bond test
JUS H.K8.023-1979 Woo? adhesives testing methods. Chemical tests
JUS D.E8.008-1987 Wooden windows and door height windows. Wooden joint elements for lower windows and door height windows. Test methods
JUS K.F1.008-1990 Bonded abrasive pro?ucts. Safety test breaking of grinding vheels
JUS K.F1.007-1990 Bon?ed abrasive products. Static balancing of grin?ing wheels. Testing
JUS D.A8.064-1985 Testing ofplywood. Determination ofdensity
JUS D.A8.061-1985 Testing ofplywood. Mistake measuring
JUS D.A8.065-1985 Testing ofplywood. Determination of flexybility
JUS H.N8.217-1991 Testlng of paper and paperboard. Deternlnat ion of internal bond strenght
JUS C.N3.001-1986 Povvder metallurgy. Hardmetals. Sampling and testing ofpovvders using sintered testpieces
JUS D.A8.067-1985 Testing of plywood. Determination shear strength in adhesines layer ,
JUS C.N2.003-1986 Mechanical testing of meta/s. Sintered metal materials, excluding hardmetals — Unnotched impact test piece
JUS D.A8.062-1985 Testing otplywood. Determination of moisture content
JUS D.A8.066-1985 Testing of plywood. Determination of tensile strength
JUS D.A8.070-1985 Testing ofplywood. Determination of compressive strength
JUS D.A8.071-1985 Testing ofplywood. Measurement ofdimensions ofpanels
JUS D.A8.068-1985 Testing ofpywood. Determination of bending strength
JUS D.A8.069-1985 lesting ot piywooa. uetermmation ot aimensions ot testpieces
JUS H.K8.022-1979 Testing methods for adhesives. Determination ofviscosity
JUS D.Z8.040-1989 Cork. Composition cork. Test methods
JUS G.S2.030-1987 Testing of leather. Determination of stitch tear force

RO-ASRO, Binding peak detection

STAS SR EN 24489-1996 Sintered hardmetals. Sampling and testing
STAS 9097/7-1984 GOAL BRICKS Determination of binding agent
STAS 6292-1976 WOOD PARTICLE BOARDS Determination of transverse internai bond
STAS 9472/3-1974 Sinter hard alloys DETERMINATION OF DENSITY
STAS 1809-1987 PLYWOOD Determination of glue strength to shearing
STAS 1574/19-1975 IRON ORES AND CONCENTRATES Determination of bound water
STAS 9472/6-1973 Sintered hard alloys DETERMINATION OF ELECTRICAL RESISTIVITY

AIA/NAS - Aerospace Industries Association of America Inc., Binding peak detection

NAS999-1981 Nondestructive Inspection of Advanced Composite Structures
NAS999-2012 NONDESTRUCTIVE INSPECTION OF ADVANCED COMPOSITE STRUCTURES (Rev 2)

Association Francaise de Normalisation, Binding peak detection

NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF EN ISO 11623:2016 Bouteilles à gaz - Construction composite - Contrôles et essais périodiques
NF E29-789*NF EN ISO 11623:2016 Gas cylinders - Composite construction - Periodic inspection and testing
NF U47-016:2021 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test
NF U47-004:2000 Animal health analysis methods - Detection of antibodies against Brucellosis by the Complement Fixation Test.
NF U47-008:2000 Animal health analysis methods - Detection of antibodies against Ovine epididymitis by the Complement Fixation Test.
NF U47-008:2012 Animal health analysis methods - Detection of antibodies against Ovine epididymitis by the Complement Fixation Test
NF A09-360:1985 Non destructive testing. Acoustic emission. Examination of composite material parts and structures. Matrix fibers.
NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF ISO 11916-2:2013 Qualité du sol - Dosage d'une sélection d'explosifs de composés apparentés - Partie 2 : méthode utilisant la chromatographie en phase gazeuse (CG) avec détection à capture d'électrons (DCE) ou détection par spectrométrie de masse (SM)
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
XP V08-813-2016 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
XP V08-813*XP CEN ISO/TS 18867:2016 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
XP CEN ISO/TS 18867:2016 Microbiologie de la chaîne alimentaire - Réaction de polymérisation en chaîne (PCR) pour la détection de micro-organismes pathogènes dans les aliments - Détection des Yersinia enterocolitica et Yersinia pseudotuberculosis pathogènes
NF U47-007:2000 Animal health analysis methods - Detection of antibodies against Avian Chlamydiosis by the Complement Fixation Test.
NF U47-004:2009 Animal health analysis method - Detection of antibodies against Brucellosis by the Complement Fixation Test
NF P22-473:1986 Metal construction. Welded assemblies. Ranges of non destructives control.
NF U47-004:2023 Méthodes d'analyse en santé animale - Recherche d'anticorps contre la brucellose par la microméthode de fixation du complément
NF T90-091*NF ISO 28540:2011 Water quality - Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water - Method using gas chromatography with mass spectrometric detection (GC-MS).
NF U47-001:2000 Animal health analysis methods - Detection of antibodies against Contagious Agalactia by the Complement Fixation Test.
NF U47-007:2009 Animal health analysis methods - Detection of antibodies against Avian Chlamydiosis by the Complement Fixation Test.
NF A89-523:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
NF A89-523*NF EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
NF EN 15190:2007 Adhésifs structuraux - Méthodes d'essai pour évaluer la durabilité à long terme des structures métalliques collées
NF U47-006:2009 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
NF U47-006:2000 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
NF U47-008:2023 Méthodes d'analyse en santé animale - Recherche d'anticorps contre l'épididymite contagieuse du bélier par la technique de fixation du complément
NF P18-446*NF EN 12504-3:2005 Testing concrete in structures - Part 3 : determination of pull-out force
NF EN ISO 22825:2017 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Contrôle des soudures en aciers austénitiques et en alliages à base nickel

U.S. Military Regulations and Norms, Binding peak detection

ARMY MIL-HDBK-793-1989 NONDESTRUCTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES
ARMY MIL-HDBK-793 VALID NOTICE 1-2013 NONDESTRUCTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES

HU-MSZT, Binding peak detection

Aerospace Industries Association/ANSI Aerospace Standards, Binding peak detection

AIA/NAS NAS999-2012 NONDESTRUCTIVE INSPECTION OF ADVANCED COMPOSITE STRUCTURES Rev 1
AIA/NAS NAS 999-1981 Nondestructive Inspection of Advanced Composite Structures

Aerospace Industries Association, Binding peak detection

AIA NAS 999-1981 Nondestructive Inspection of Advanced Composite Structures R(1988)

未注明发布机构, Binding peak detection

BS EN ISO 11623:2015(2018) Gas cylinders - Composite construction - Periodic inspection and testing
DIN EN ISO 11623:2016 Gas cylinders – Composite construction – Periodic inspection and testing
BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature
NB 20479.5-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 5: Visual inspection
NB 20479.2-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 2: Radiographic testing
NB 20479.3-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 3: Penetration testing
NB 20479.4-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 4: Magnetic particle testing
NB 20479.1-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 1: Ultrasonic testing

German Institute for Standardization, Binding peak detection

DIN EN ISO 11623:2018-01 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02); German version EN ISO 11623:2015 / Note: To be replaced by DIN EN ISO 11623 (2022-04), DIN EN ISO 11623 (2022-12).
DIN 54452:1981 Testing of adhesives for metals and adhesively bonded metal joints; compression shear test
DIN EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09
DIN EN 13286-41:2022 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DIN EN 13286-41:2020 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German and English version prEN 13286-41:2020
DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN CEN ISO/TS 18867:2016-01*DIN SPEC 10056:2016-01 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/TS 18867:2015); German version CEN ISO/TS 18867:2015
DIN 54461:2021-03 Structural adhesives - Testing of adhesive bonds - Bending peel test
DIN ISO 11916-2:2014-11 Soil quality - Determination of selected explosives and related compounds - Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) (ISO 11916-2:2013)
DIN EN 14869-2:2011-07 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified); German version EN 14869-2:2011
DIN EN 13286-46:2003-07 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value; German version EN 13286-46:2003
DIN EN ISO 22825:2018-02 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017); German version EN ISO 22825:2017
DIN 51798:2018 Testing of liquid fuels - Determination of the crystallization point of pure benzene
DIN 51798:2005 Testing of liquid fuels - Determination of the crystallization point of pure benzene
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN CEN/TS 13286-54:2014-12*DIN SPEC 18094:2014-12 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures; German version CEN/TS 13286-54:2014
DIN EN 15190:2007-10 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures; German version EN 15190:2007
DIN EN 13286-48:2005-10 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation; German version EN 13286-48:2005
DIN EN 17391:2019 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements; German and English version prEN 17391:2019
DIN EN 17391:2022 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
DIN 54455:2016 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
DIN 54455:1984 Testing of adhesives for metals and of bonded metal joints; torsional shear test
DIN EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
DIN EN 17391:2022-08 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements; German version EN 17391:2022
DIN EN 12370:1999 Natural stone test methods - Determination of resistance to salt crystallisation; German version EN 12370:1999
DIN 55350-18:1987 Concepts in quality and statistics; concepts relating to certificates on results of quality inspections; quality inspection certificates

Professional Standard - Aerospace, Binding peak detection

QJ 2914-1997 Acoustic Emission Testing Method for Composite Structural Parts

Professional Standard - Commodity Inspection, Binding peak detection

SN/T 1161-2002 Complement fixation test for detection of chlamydia infection
SN/T 1526-2005 Determination of babesia equi-Micro-complement fixation
SN/T 3949-2014 Plastic package.Determination of harmful material bisphenol A.Conjuction of antigen and antibody method
SN/T 1907-2007 Protocol of the PCR for mycobacterium paratuberculosis
SN/T 3312-2012 Interferon-gamma release assay for the diagnosis of Mycobacterium tuberculosis in vitro

Professional Standard - Aviation, Binding peak detection

HB 20095-2012 Inspection method for composite parts and structures using ultrasonic C-scan
HB 6107-1986 Acoustic resistance detection of metal honeycomb bonded structure
HB 6108-1986 Acoustic Resonance Detection of Metal Honeycomb Adhesive Structures
HB 6462-1990 Standard test block for acoustic and vibration testing of metal honeycomb bonded structures

European Committee for Standardization (CEN), Binding peak detection

EN ISO 11623:2015 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02)
EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN ISO 11073-10421:2012 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow)
EN 13286-43-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-4-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-3-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-41-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DD ENV 12 260-1996 Water Quality - Determination of Nitrogen - Determination of Bound Nitrogen, After Combustion and Oxidation to Nitrogen Dioxide, Using Chemiluminescence Detection
EN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
FprEN 17391-2020 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
EN ISO 22232-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/TS 18867:2015)
EN 16603-32-02:2014 Space engineering - Structural design and verification of pressurized hardware

Society of Automotive Engineers (SAE), Binding peak detection

SAE AMS2643E-2012 Structural Examination of Titanium Alloys, Chemical Etch Inspection Procedure
SAE AMS2643C-2002 Structural Examination of Titanium Alloys, Chemical Etch Inspection Procedure
SAE AMS2643D-2007 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
SAE AIR5279-2016 Composite and Bonded Structure Inspector: Training Document
SAE AMS2642D-2010 Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2642C-2005 Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2642A-1994 STRUCTURAL EXAMINATION OF TITANIUM ALLOYS Etch-Anodize Inspection Procedure
SAE AMS2642-1972 STRUCTURAL EXAMINATION OF TITANIUM ALLOYS Etch-Anodize Inspection Procedure
SAE AMS2642F-2021 Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE ARP5606A-2011 Composite Honeycomb NDI Reference Standards
SAE AMS2642B-2003 (R) Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure R(1994)
SAE ARP4402-2013 Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure
SAE ARP4402A-2020 Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

SAE - SAE International, Binding peak detection

SAE AMS2643F-2018 Structural Examination of Titanium Alloys, Chemical Etch Inspection Procedure
SAE AMS2643A-1988 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
SAE AMS2643-1972 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
SAE AMS2643B-1997 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
SAE AIR5279-1999 Composite and Bonded Structure Inspector: Training Document
SAE AMS2642A-1989 Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2642E-2016 Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2631-1972 Ultrasonic Inspection of Titanium Alloys

IT-UNI, Binding peak detection

UNSIDER 22-1957

Liaoning Provincial Standard of the People's Republic of China, Binding peak detection

DB21/T 2122-2013 Composite structure plastic drainage inspection well
DB21/T 2536-2015 Real-time fluorescent PCR detection method for Mycobacterium paratuberculosis
DB21/T 2419-2015 Technical regulations for engineering testing of prefabricated concrete structures

Professional Standard - Certification and Accreditation, Binding peak detection

RB/T 197-2015 Guide on stating test and calibration results and compliance with specification

Professional Standard - Electron, Binding peak detection

SJ 1282-1977 Test methods for adhesion of metallic coatings

British Standards Institution (BSI), Binding peak detection

BS EN ISO 11623:2015 Gas cylinders. Composite construction. Periodic inspection and testing
PD ISO/TS 13896:2012 Soil quality. Determination of linear alkylbenzene sulfonate (LAS). Method by HPLC with fluorescence detection (LC-FLD) and mass selective detection (LC-MSD)
BS 9690-2:2011 Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
BS EN ISO 11073-10421:2012 Health informatics. Personal health device communication Device specialization. Peak expiratory flow monitor (peak flow)
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
PD CEN ISO/TS 18867:2015 Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
21/30391147 DC BS ISO 23876. Gas cylinders. Cylinders and tubes of composite construction — Acoustic emission examination (AT) for periodic inspection and testing
BS ISO 6133:2015 Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
PD ISO/TS 19016:2019 Gas cylinders. Cylinders and tubes of composite construction. Modal acoustic emission (MAE) testing for periodic inspection and testing

International Organization for Standardization (ISO), Binding peak detection

ISO 11623:2015 Gas cylinders - Composite construction - Periodic inspection and testing
ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
ISO/TS 19016:2019 Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission (MAE) testing for periodic inspection and testing
ISO 10273:1994 Microbiology - General guidance for the detection of presumptive pathogenic Yersinia enterocolitica
ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
ISO 16838:2019 Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures
ISO 23876:2022 Gas cylinders — Cylinders and tubes of composite construction — Acoustic emission examination (AT) for periodic inspection and testing
ISO 22232-3:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment
ISO/IEEE 11073-10421:2012 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow)
ISO/CD TR 23867 Ultrasonic testing of hardmetals

ZA-SANS, Binding peak detection

SANS 11623:2018 Gas cylinders - Composite construction - Periodic inspection and testing

Taiwan Provincial Standard of the People's Republic of China, Binding peak detection

CNS 1287-1960 Method of Test for Leather (Combined Tannin Test)
CNS 13021-2000 Method of Visual Test for the welds of Steel Structure
CNS 13341-2000 Method of Magnetic Particle Test for Welds of Steel Structure
CNS 13020-2000 Method of Radoigraphic Test for the Welds of Steel Structure
CNS 13464-2000 Method of Liquid Penetrant Test for the Welds of Steel Structure
CNS 12618-2000 Method of Ultrasonic Test for the welds of Steel Structure
CNS 12845-1998 Method of straight-beam ultrasonic test for structure-use steel plate

U.S. Air Force, Binding peak detection

AIR FORCE MIL-HDBK-349-1994 MANUFACTURE AND INSPECTION OF ADHESIVE BONDED, ALUMINUM HONEYCOMB SANDWICH ASSEMBLIES FOR AIRCRAFT
AIR FORCE A-A-59603-2004 TESTING KIT, PETROLEUM, FUEL SYSTEM ICING INHIBITOR

Professional Standard - Construction Industry, Binding peak detection

JG/T 507-2016 Digital sticking strength tester
JG 3056-1999 Digital sticking strength tester
JGJ/T 371-2016 Technical specification for in-site testing of non fired block masonry
JGJ/T 357-2015 Technical specification for in-situ measurement of thermal transmittance of building envelope

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Binding peak detection

GB/T 50344-2004 Technical standard for inspection of building structure
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 43143-2023 Non-destructive testing acoustic emission detection method for classification of active cracks in concrete structures
GB/T 50621-2010 Technical standard for in-site testing of steel structure
GB/T 18823-2002 Allowable error for judge of quality testing results in feeds
GB/T 50784-2013 Technical standard for in-situ inspection of concrete structure
GB/T 18823-2010 Permitted tolerants for judgement of testing results in feeds
GB/T 10430-1989 Standard test method for binding strength of sintered metal friction elements
GB/T 41655-2022 Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion
GB/T 25375-2010 Metal-cutting machine tools.Check and evaluation for combine surface by miniating
GB/T 14926.48-2001 Laboratory animal--Method for examination of Mycobacterium tuberculosis
GB/T 42051-2022 Requirements for the inspection and maintenance of manned submersible structural parts
GB/T 10903-1989 Check method of mixer for plastics
GB/T 27639-2011 Real-time PCR method for the detection of tuberculosis pathogenic organisms
GB/T 32945-2016 In Vitro Detection of Bovine Tuberculosis Diagnosis Interferon-γ Method
GB/T 42522-2023 Testing method for static air leakage rate of iron ore sintering system
GB 51008-2016 Testing and Appraisal Standards for Towering and Complex Steel Structures
GB/T 27664.3-2012 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 3:Combined equipment
GB/T 25757-2010 Non-destructive testing.Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
GB/T 7734-2015 Method for ultrasonic testing of clad steel plates
GB/T 30592-2014 Test method for solar heat gain coefficient of transparent envelope
GB/T 32774-2016 X-ray inspection method for internal structure characteristics of wooden door
GB/T 27637-2011 Real-time PCR method for the detection of Mycobacterium avium subsp.paratuberculosis

Professional Standard - Urban Construction, Binding peak detection

GB/T 50344-2019 "Technical Standards for Building Structure Testing"
JGJ/T 488-2020 Technical standards for on-site inspection of wooden structures
JGJ/T 456-2019 Technical standard for detecting concrete structures by radar method

National Metrological Verification Regulations of the People's Republic of China, Binding peak detection

JJG(邮电) 037-1997 Verification Regulations for Frame Structure Tester
JJG(机械) 95-1992 Verification rules for diamond sintered body wear ratio tester

Sichuan Provincial Standard of the People's Republic of China, Binding peak detection

DB51/T 2302-2016 Mycoplasma conjunctiva PCR detection method
DB51/T 2307-2016 PCR detection method of Corynebacterium pseudotuberculosis
DB51/T 1996-2015 Technical specification for testing structural concrete strength by ultrasonic rebound comprehensive method in highway engineering

AENOR, Binding peak detection

UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE-EN ISO 11623:2016 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02)
UNE-EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
UNE-EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
UNE-EN 13286-45:2004 Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures
UNE-EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
UNE-EN 13286-42:2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
UNE-EN 13286-48:2006 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
UNE-EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
UNE-EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value

RU-GOST R, Binding peak detection

GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
GOST 17005-1982 Wooden laminated structures. Methods to determinate water-stability of adhesive joints
GOST R ISO 11843-7-2014 Statistical methods. Capability of detection. Part 7. Methods of an estimation taking into account background noise
GOST 24921-1981 Synthetic latexes. Determination of bound styrene content
GOST 20018-1974 Sintered hardmetals. Determination of densitu
GOST 23581.12-1979 Iron ores, concentrates, agglomerates and pellets. Methods for the determination of chemically combined water

IN-BIS, Binding peak detection

IS 10052 Pt.4-1984

American Society of Mechanical Engineers (ASME), Binding peak detection

ASME SEC III D2 CC-5000-2001 Article CC-5000 Construction Testing and Examination
ASME A17 Checklist 2-1989 Checklist for inspection and test of elevators used for construction

JP-NDIS, Binding peak detection

NDIS 1401-2009 Methods of radiographic examination for concrete structures

BR-ABNT, Binding peak detection

CZ-CSN, Binding peak detection

CSN 42 0892 Cast.10-1983 Testing of sintered carbides Determlnation of microstructure
CSN 44 1854-1989 Manganese ores, concentrates and agglomerates. Determination of chemically bonded water
CSN 42 0892 Cast.11-1983 Testing of sintered carbides Determination of porosity and uncombined carbon.
CSN 42 0892 Cast.2-1984 Testing of sintered carbides. Sampllng and testing
CSN 42 0892 Cast.3-1980 Testing of sintered carbides. Determination of density

NZ-SNZ, Binding peak detection

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength

ES-UNE, Binding peak detection

UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015)
UNE-ISO 19594:2022 Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page- pull test working upwards
UNE-EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
UNE-EN 17391:2023 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements

SE-SIS, Binding peak detection

SIS SS 11 43 06-1984 Non-destructive testing - Eddy current testing - Copper and copper alloys - Tubes
SIS SS-IEC 936:1991 Shipborne radar - Operational and performance requirements - Methods of test and required test results

Danish Standards Foundation, Binding peak detection

DS/EN 12504-2:2021 Testing concrete in structures – Part 2: Non-destructive testing – Determination of rebound number
DS/EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DS/EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
DS/EN 13286-45:2004 Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures
DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DS/EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
DS/EN 13286-42:2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
DS/EN 13286-48:2006 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverization
DS/EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
DS/ISO 4489:1994 Sintered hardmetals - Sampling and testing
DS/ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment
DS/EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
DS/EN 301003-3 V1.2.1:2001 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 3: Test Suite Structure and Test Purposes (TSS&T P)
DS/EN 301003-5 V1.2.1:2001 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 5: Test Suite Structure and Test Purposes (TSS&T P)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Binding peak detection

GB/T 34342-2017 Test method for heat transfer coefficient of building envelope
GB/T 34886-2017 Non-destructive testing—Test method for laser shearography of composite materials
GB/T 33511-2017 Mechanical vibration—Evaluation of measurement results from dynamic tests and investigation on bridges
GB/T 33889-2017 Nondestructive testing instrument—Specification for eddy current-magnetic flux leakage integrated instrument

PL-PKN, Binding peak detection

PN H04501-1957 Examination of steel macrostructure -- Deep etching test
PN H87904-1972 Metallographic examinations of toundry alloys Dimensions ot the images ot microstrucfure
PN P22113-1974 Leathers Determination of uncombined sulphur content

Lithuanian Standards Office , Binding peak detection

LST EN 13286-41-2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
LST EN 13286-43-2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
LST EN 13286-45-2004 Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures
LST EN 13286-40-2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
LST EN 13286-42-2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
LST CEN/TS 13286-54-2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
LST EN 13286-48-2005 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
LST EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
LST EN 13286-46-2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
LST EN 301 003-3 V1.1.3-2001 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 3: Test Suite Structure and Test Purposes (TSS&TP)
LST EN 301 003-5 V1.1.3-2001 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 5: Test Suite Structure and Test Purposes (TSS&TP)

AT-ON, Binding peak detection

OENORM EN 13286-41-2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
ONORM M 3038-1994 Non-destructive testing of electrically conducting materials according to alloy, structure and texture by electromagnetic methods (Testing the mistake of identity)
OENORM M 9421-2021 Handling of the results of emission measurements below the limit of quantification and detection

Professional Standard - Machinery, Binding peak detection

JB/T 11612-2013 Non-destructive testing instrument.Eddy current and magnetic flux leakage integrated testing instrument
JB/T 11611-2013 Non-destructive testing instrument.Eddy current and magnetic memory integrated testing instrument
JB/T 9876-1999 Metal-cutting machine tools - Check and evaluation for combine surface by miniating
JB/T 6646-2007 Determination of physical properties of sintered metal products.Specifications

工业和信息化部, Binding peak detection

JB/T 13464-2018 Non-destructive testing of honeycomb sandwich structure using flash light-excited infrared thermal imaging method
YD/T 3029-2016 Specifications for Inspection and Appraisal of Mobile Telecommunications Steel Tower Mast Structures
YS/T 1130-2016 Method for detecting welding cracks in sintered metal porous materials

BE-NBN, Binding peak detection

NBN-ISO 3447:1992 Joints in building - General check-list of joint fonctions

Professional Standard - Ferrous Metallurgy, Binding peak detection

YB/T 2429-2009 Method for testing the plasticity of bonded clay for refractory materials
YB/T 2429-1983 Method for testing the plasticity of bonded clay for refractory materials
YB 9257-1996 Steel structure testing and evaluation and strengthening technical regulations

UNKNOWN, Binding peak detection

American Society for Testing and Materials (ASTM), Binding peak detection

ASTM D5176-20 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM UOP780-92 Carbohydrates by HPLC
ASTM F1512-94(1999) Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
ASTM F1512-94(2003) Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
ASTM E3100-17(2017) Standard Guide for Acoustic Emission Examination of Concrete Structures
ASTM E3100-17 Standard Guide for Acoustic Emission Examination of Concrete Structures

Japanese Industrial Standards Committee (JISC), Binding peak detection

JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Indonesia Standards, Binding peak detection

SNI 13-3606-1994 Methods for identification of crystalline compounds by x-raydiffraction
SNI 03-4430-1997 Test method of concrete structure element by concrete hammer, N dan NR type
SNI 03-6851-2002 Test method for structural wood panel flexibility

CU-NC, Binding peak detection

NC 42-22-1968 Determination of consistency in cellulose pulp
NC 41-32-4-1985 Leather. Conglomerate Determination of Structural Strength

Shaanxi Provincial Standard of the People's Republic of China, Binding peak detection

DB61/T 1288-2019 Technical specification for bridge structure prestress testing
DB61/T 1327.3-2020 Qualification Accreditation of Inspection and Testing Institutions Part 3: Requirements for Confirmation of Equipment Verification and Calibration Results

Beijing Provincial Standard of the People's Republic of China, Binding peak detection

DB11/T 849-2011 Building appraisal and structural inspection operating procedures
DB11/T 849-2021 Building structure inspection and appraisal operating procedures
DB11/T 1167-2015 Technical specification for structural inspection of urban rail transit facilities
DB11/T 2126-2023 Technical standards for urban rail transit structural engineering inspection

Tianjin Provincial Standard of the People's Republic of China, Binding peak detection

DB12/T 521-2014 Technical specification for bovine tuberculosis phage detection

GOSTR, Binding peak detection

GOST R ISO 11843-7-2020 Statistical methods. Capability of detection. Part 7. Methods of an estimation taking into account background noise

Shandong Provincial Standard of the People's Republic of China, Binding peak detection

DB37/T 3624-2019 Technical regulations for the detection of aerosol Mycobacterium tuberculosis complex in cattle farms by fluorescence quantitative PCR
DB37/T 5025-2014 Technical specification for dynamic performance testing of building structures
DB37/T 4599-2023 Technical specification for AC electromagnetic field testing of metal structures
DB37/T 5215-2022 On-site inspection technical standard for prefabricated steel structure residences
DB37/T 5106-2018 Technical standard for on-site inspection of prefabricated concrete structures

Professional Standard - Non-ferrous Metal, Binding peak detection

YS/T 837-2012 Standard practice for ultrasonic C-scan bond evaluation of sputtering target-backing plate assemblies

Jilin Provincial Standard of the People's Republic of China, Binding peak detection

DB22/T 1549-2012 Specifications for evaluation of testing capabilities of automobile comprehensive performance testing stations
DB22/T 2042-2014 Specifications for quality control of test results of motor vehicle safety technical inspection institutions
DB22/T 3091-2019 Real-time fluorescent PCR detection method for pathogenic bacteria of deer tuberculosis
DB22/T 5037-2020 Technical standards for testing of prefabricated concrete building structures

Hubei Provincial Standard of the People's Republic of China, Binding peak detection

DB42/T 733-2011 IFN-γin vitro release assay

Jiangxi Provincial Standard of the People's Republic of China, Binding peak detection

DB36/T 936-2017 Technical specification for safety inspection of steel structure TV tower
DB36/T 935-2017 Technical regulations for safety inspection of steel structure transmission towers
DB36/T 1574-2022 General Technical Specifications for Food Rapid Test Result Verification
DB36/T 937-2017 Technical regulations for safety inspection of steel structure petrochemical towers

Standard Association of Australia （SAA）, Binding peak detection

AS/NZS 2269.1:2012

Acoustical Society of America (ASA), Binding peak detection

ASA S3.13-1987 Mechanical Coupler for Measurement of Bone Vibrators

KR-KS, Binding peak detection

KS B ISO 22825-2023 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

NL-NEN, Binding peak detection

NEN-ISO 4489:1993 Sintered hardmetals. Sampling and testing (ISO 4489:1978)
NEN 6760-1991 TGB 1990 TIMBER STRUCTURES General principles Requirements and determination methods

Professional Standard-Ships, Binding peak detection

CB/Z 106-1968 Aluminum alloy hull structure riveting classification and quality inspection requirements

(U.S.) Ford Automotive Standards, Binding peak detection

FORD FLTM BU 017-1-2000 NONDESTRUCTIVE INSPECTION (NDI) OF ADHESIVE BONDS

Heilongjiang Provincial Standard of the People's Republic of China, Binding peak detection

DB23/T 3012-2021 Specifications for quality control of test results of motor vehicle safety technical inspection institutions

Institute of Electrical and Electronics Engineers (IEEE), Binding peak detection

IEEE 1895-2014 Below-Grade Inspection and Assessment of Corrosion on Steel Transmission, Distribution, and Substation Structures

Professional Standard - Water Conservancy, Binding peak detection

SL 713-2015 Technical code for defect detection of hydraulic concrete structures

ACI - American Concrete Institute, Binding peak detection

ACI 228.2R-1998 Nondestructive Test Methods for Evaluation of Concrete in Structures
ACI 228.2R-2013 Report on Nondestructive Test Methods for Evaluation of Concrete in Structures

Jiangsu Provincial Standard of the People's Republic of China, Binding peak detection

DB32/T 3768-2020 Technical specifications for maintenance, testing and assessment of port engineering structures
DB32/T 3754-2020 Technical specification for testing of assembled monolithic concrete structures
DB32/T 2554-2013 ESR Spectroscopy-Detection of Irradiated Agricultural Products Containing Crystalline Sugar

Professional Standard - Railway, Binding peak detection

TB 10426-2004 Specification for testing the strength of concrete for railway engineering structures
TB 10426-2019 Specification for testing the strength of concrete for railway engineering structures

国家市场监督管理总局, Binding peak detection

RB/T 038-2020 Guidelines for Quality Monitoring of Food Microbiological Test Results

水利部, Binding peak detection

SL/T 713-2015 Technical Regulations for Detection of Defects in Hydraulic Concrete Structures

国家能源局, Binding peak detection

NB/T 20479.2-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 2: Radiographic testing
NB/T 20479.4-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 4: Magnetic particle testing
NB/T 20479.3-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 3: Penetration testing
NB/T 20479.5-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 5: Visual inspection
NB/T 20479.1-2018 Non-destructive testing of welds of structural modules and mechanical modules of nuclear power plants Part 1: Ultrasonic testing

Anhui Provincial Standard of the People's Republic of China, Binding peak detection

DB3418/T 018-2022 Industry-University-Research Cooperation Service Specifications for Inspection and Testing Institutions

Professional Standard - Civil Aviation, Binding peak detection

MH/T 3027-2013 Test method for adhesion or cohesion strength of thermal spray coatings

CEN - European Committee for Standardization, Binding peak detection

PREN 17391-2019 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements

Professional Standard - Traffic, Binding peak detection

JT/T 503-2004 Automobile engine multi-analyzer

交通运输部, Binding peak detection

JT/T 503-2023 Automotive engine comprehensive detector

AGMA - American Gear Manufacturers Association, Binding peak detection

14FTM05-2014 A Different Way to Look at Profile and Helix Inspection Results

American Gear Manufacturers Association, Binding peak detection

AGMA 14FTM05-2014 A Different Way to Look at Profile and Helix Inspection Results

ETSI - European Telecommunications Standards Institute, Binding peak detection

ETSI EN 301 003-5:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. Two (DSS2) Protocol; Connection Characteristics; Peak Cell Rate Modification by the Connection Owner; Part 5: Test Suite Structure and Test Purposes (TSS&TP)
ETSI EN 301 003-5:1998 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. Two (DSS2) Protocol; Connection Characteristics; Peak Cell Rate Modification by the Connection Owner; Part 5: Test Suite Structure and Test Purposes (TSS&TP)
ETSI EN 301 003-3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. Two (DSS2) Protocol; Connection Characteristics; Peak Cell Rate Modification by the Connection Owner; Part 3: Test Suite Structure and Test Purposes (TSS&TP)
ETSI EN 301 003-5:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. Two (DSS2) Protocol; Connection Characteristics; Peak Cell Rate Modification by the Connection Owner; Part 5: Test Suite Structure and Test Purposes (TSS&TP)