ZH
RU
ES

Normal phase peak shape difference

Normal phase peak shape difference, Total:41 items.

In the international standard classification, Normal phase peak shape difference involves: Products of non-ferrous metals, Iron and steel products, Non-ferrous metals, Fibre optic communications, Measurement of volume, mass, density, viscosity, Textile fibres, Protection of and in buildings, Optoelectronics. Laser equipment, Linear and angular measurements.

AGMA - American Gear Manufacturers Association, Normal phase peak shape difference

09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair
04FTM3-2004 A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error

American Gear Manufacturers Association, Normal phase peak shape difference

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair
AGMA 04FTM3-2004 A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error

RO-ASRO, Normal phase peak shape difference

STAS 7394-1966

International Organization for Standardization (ISO), Normal phase peak shape difference

ISO 7757:1984 Wrought copper and copper alloys; Drawn hexagonal bars; Symmetric plus and minus tolerances on width across flats and form tolerances
ISO 7756:1984 Wrought copper and copper alloys; Drawn round bars; Symmetric plus and minus tolerances on diameter and form tolerances
ISO 7758:1984 Wrought copper and copper alloys; Drawn square bars; Symmetric plus and minus tolerances on width across flats and form tolerances
ISO 5193:1981 Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
ISO 6362-5:2001 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions
ISO 6362-5:1991 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 5: extruded round, square and hexagonal bars; tolerances on form and dimensions
ISO 6362-5:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 5: Round, square and hexagonal bars - Tolerances on shape and dimensions
ISO 6363-3:2012 Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 3: Drawn round bars and wires - Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)

British Standards Institution (BSI), Normal phase peak shape difference

BS EN 1592-4:1998 Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes
21/30394841 DC BS ISO 6363-3. Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires - Part 3. Drawn round bars and wires. Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
BS ISO 11562:1997 Geometric product specifications (GPS). Surface texture. Profile method. Metrological characteristics of phase correct filters

Korean Agency for Technology and Standards (KATS), Normal phase peak shape difference

KS D ISO 5193:2004 Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
KS D ISO 5193-2004(2019) Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
KS B ISO 11562:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Metrological characteristics of phase correct filters
KS B ISO 11562:2014 Geometrical Product Specifications(GPS)－Surface texture：Profile method－Metrological characteristics of phase correct filters

German Institute for Standardization, Normal phase peak shape difference

DIN EN 1592-4:1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes; German version EN 1592-4:1997
DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN ISO 6525:1986-05 Plain bearings; ring type thrust washers made from strip; dimensions and tolerances; identical with ISO 6525, edition 1983 / Note: To be replaced by DIN ISO 6525 (2022-11).

Professional Standard - Aviation, Normal phase peak shape difference

HB 7748-2004 Requirement for selection and interrelation of dimension tolerance,geometrical tolerance and surface roughness

VN-TCVN, Normal phase peak shape difference

TCVN 5121-1990 Deviations from true forms and disposition of surfaces.General requirements for measuring methods

European Association of Aerospace Industries, Normal phase peak shape difference

AECMA PREN 2042-1976 Square Steel Bars - Rolled Dimensions - Tolerance js 16 Aerospace Series Edition 1
AECMA PREN 2045-1976 Square Aluminium Alloy Bars - Drawn Dimensions - Tolerance h 11 Aerospace Series Edition 1
AECMA PREN 2041-1976 Square Steel Bars - Drawn Dimensions - Tolerances h 11/h 12 Aerospace Series Edition 1

NO-SN, Normal phase peak shape difference

NS-EN 10056-2-1994 Structural steel equal and unequal leg angles. Part 2: Tolerances on shape and dimensions

Association Francaise de Normalisation, Normal phase peak shape difference

NF ISO 10285/A1:2012 Roulements - Roulements linéaires à recirculation de billes, type manchon - Dimensions d'encombrement et tolérances - Amendement 1
NF A50-813*NF EN 1592-4:1997 Aluminium and aluminium alloys. HF seam welded tubes. Part 4 : tolerances on dimensions and form for square, rectangular and shaped tubes.
NF ISO 3601-1/A1:2020 Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 1 : diamètres intérieurs, sections, tolérances et codes d'identification dimensionnelle - Amendement 1

机械工业部, Normal phase peak shape difference

JB/T 6185.5-1992 16mm groove system combination clamp support adjacent solid groove square pad
JB/T 6185.6-1992 16mm slot system combined clamp support adjacent vertical slot square support

Professional Standard - Post and Telecommunication, Normal phase peak shape difference

YDB 061.2-2011 40Gb/s Phase Modulation Optical Transceiver Module Specifications Part 2: Differential Quadrature Phase Shift Keying (DQPSK) Modulation
YD/T 2618.2-2013 40Gb/s Phase Modulation Optical Transceiver Module Specifications Part 2: Differential Quadrature Phase Shift Keying (DQPSK) Modulation

工业和信息化部, Normal phase peak shape difference

YD/T 2805.1-2015 Phase-Shift Optical Demodulators Part 1: Differential Quadrature Phase Shift Keying (DQPSK) for 40Gb/s Optical Demodulator Technical Conditions

IT-UNI, Normal phase peak shape difference

UNI 6265-1968 Glass fibre products for thermal and acoustical insulation. Pipe coverings. Dimensional and shape tolerances and respective determinations.
UNI 6267-1968 Glass fibre products for thermal and acoustical insulation. Resin bonded slabs. Dimensional and shape tolerances and respective determinations.

European Committee for Standardization (CEN), Normal phase peak shape difference

EN ISO 24013:2006 Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation