ZH
RU
ES

Analysis test part high frequency

Analysis test part high frequency, Total:496 items.

In the international standard classification, Analysis test part high frequency involves: Electricity. Magnetism. Electrical and magnetic measurements, Galvanic cells and batteries, Fibre optic communications, Non-ferrous metals, Power transmission and distribution networks, Telecommunication systems, Ferroalloys, Analytical chemistry, Shipbuilding and marine structures in general, Noise with respect to human beings, Nuclear energy engineering, Road engineering, Non-metalliferous minerals, Alarm and warning systems, Metalliferous minerals, Powder metallurgy, Products of non-ferrous metals, Acoustics and acoustic measurements, Coals, Iron and steel products, Paper and board, Products of the chemical industry, Power stations in general, Special measuring equipment for use in telecommunications, Electromechanical components for electronic and telecommunications equipment, Testing of metals, Electrical and electronic testing, Fuels, Character sets and information coding, Plastics, Linear and angular measurements, Protection against dangerous goods, Edible oils and fats. Oilseeds, Meat, meat products and other animal produce, Microbiology, Construction materials, Sensory analysis, Components for electrical equipment, Natural gas, Welding, brazing and soldering, Ceramics, Electromagnetic compatibility (EMC), Occupational safety. Industrial hygiene, Textile fibres, Electrical wires and cables, Road vehicles in general, Components and accessories for telecommunications equipment, Laboratory medicine, Paper products, Environmental testing, Industrial furnaces, Audio, video and audiovisual engineering, Structures of buildings, Sugar. Sugar products. Starch, Air quality, Radiocommunications, Medical equipment, Protection against fire, Gas and steam turbines. Steam engines, Insulating materials, Hospital equipment, Rubber and plastics products, Protective equipment.

National Metrological Verification Regulations of the People's Republic of China, Analysis test part high frequency

JJG(电子) 07005-1988 QF4021 High Frequency Spectrum Analyzer Trial Verification Regulations
JJG 127-1986 Verification Regulation of Model HP 4191 A RF Impedance Analyzer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Analysis test part high frequency

GB/T 11462-1989 Test methods of spectrum analyzers
GB/T 4324.27-2012 Methods for chemical analysis of tungsten.Part 27:Determination of carbon content.High frequency combustion -infrared absorption method
GB/T 4325.21-2013 Methods for chemical analysis of molybdenum.Part 21:Determination of carbon content and sulfur content.High frequency combustion-infrared absorption method
GB/T 3260.9-2013 Methods for chemical analysis of tin.Part 9:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
GB/T 26416.7-2023 Chemical Analysis Methods of Rare Earth Ferroalloys Part 7: Determination of Carbon and Sulfur Content by High Frequency-Infrared Absorption Method
GB/T 6150.4-2008 Methods for chemical analysis of tungsten concentrates.Determination of sulfur content .The high frequency-infrared absorption method
GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
GB/T 26019-2010 Methods for chemical analysis of high impurity tungsten mineral.Determination of tungsten trioxide content.Twice separation and igniting gravimetric method
GB/T 14506.28-2010 Methods for chemical analysis of silicate rocks.Part 28:Determination of 16 major and minor elements content
GB/T 4324.23-2012 Methods for chemical analysis of tungsten.Part 23:Determination of sulfur content.The combustion-conductometric titration and high frequency combustion-infrared absorption method
GB/T 14999.4-2012 Test methods for superalloys.Part 4:Determination of characterizing banding grains and primary carbides distribution of superalloy rollings
GB/T 8647.9-1988 Nickel--Determination of sulphur content--Infra-red absorption method after high frequency induction furnace combustion
GB/T 8647.10-1988 Nickel--Determination of carbon content--Infra-red absorption method after high frequency induction furnace combustion
GB/T 7341.4-1998 Audiometers. Part 4: Equipment for extended high-frequency audiometry
GB/T 8647.8-2006 The methods for chemical analysis of nickel. Determination of sulphur content. Infra-red absorption method after high frequency induction furnace combustion
GB/T 8647.9-2006 The methods for chemical analysis of nickel. Determination of carbon content. Infra-red absorption method after high frequency induction furnace combustion
GB/T 6150.4-2023 Methods of chemical analysis of tungsten concentrates-Part 4: Determination of sulfur content by high-frequency induction infrared absorption method and combustion-iodometric method
GB/T 4074.21-2018 Winding wires test methods.Part 21: Electrical endurance under high frequency voltage impulses
GB/T 12690.1-2015 Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides.Part 1: Determination of carbon and sulfur contents.High frequency-infrared absorption method
GB/T 12690.1-2022 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 1：Determination of carbon and sulfur contents—High frequency-infrared absorption method
GB/T 23364.6-2009 Methods for chemical analysis of high purity indium oxide.Part 6:Determination of the loss on ignition.Gravimetric analysis
GB/T 10066.9-2008 Test methods for electroheat installations.Part 9:The determination of power output for high-frequency dielectric heating installation
GB/T 23362.6-2009 Methods for chemical analysis of high purity indium hydroxide.Part 6:Determination of the loss on ignition.Gravimetric analysis
GB/T 1819.10-2004 Methods for chemical analysis of tin concentrates Determination of sulphur content-The high frequency infrared absorption method and the combustion potassium iodate titrimetric method
GB/T 23364.5-2009 Methods for chemical analysis of high purity indium oxide.Part 5:Determination of chlorine content.Mercuric sulfocyanide spectrophotometry

European Committee for Electrotechnical Standardization（CENELEC）, Analysis test part high frequency

EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests
EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
EN IEC 62984-3:2020 High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests
EN 61260-3:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests
EN IEC 61169-1-6:2022 Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
EN IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems

Association Francaise de Normalisation, Analysis test part high frequency

NF C58-484-2*NF EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2 : safety requirements and tests
NF C58-484-3*NF EN IEC 62984-3:2020 High-temperature secondary batteries - Part 3 : sodium-based batteries - Performance requirements and tests
NF EN 15964:2011 Ethylotests, autres que les dispositifs à usage unique - Exigences et méthodes d'essai
NF S31-001-4:1995 Audiometers. Part 4 : equipment for extended high-frequency audiometry.
NF EN 2591-225:2008 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 225 : tenue en haute tension HF
NF T70-337:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of secondary explosive constituents by room temperature extraction.
NF C93-846-1*NF EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1 : optical spectrum analyzers
NF EN 61290-1-2:2006 Amplificateurs optiques - Méthodes d'essai - Partie 1-2 : paramètres de puissance et de gain - Méthode de l'analyseur de spectre électrique
NF EN 62129-1:2016 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1 : analyseurs de spectre optique
NF EN 2591-224:2008 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 224 : fuite HF
NF C93-400-21-1*NF EN 60512-21-1:2011 Connectors for electronic equipment - Tests and measurements - Part 21-1 : R.F. resistance tests - Test 21a : R.F. shunt resistance.
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF C97-010-3*NF EN 61260-3:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part 3 : periodic tests
NF EN 61260-3:2016 Électroacoustique - Filtres de bande d'octave et de bande d'une fraction d'octave - Partie 3 : essais périodiques
NF C93-805-5-2*NF EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2 : reflectance parameters - Electrical spectrum analyser method
NF EN 196-2:2013 Méthodes d'essais des ciments - Partie 2 : analyse chimique des ciments
NF M07-071-1*NF EN ISO 12156-1:2018 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1 : test method
NF EN 60060-2:2011 Techniques des essais à haute tension - Partie 2 : systèmes de mesure
NF EN ISO 10893-8:2011 Techniques des essais à haute tension - Partie 2 : systèmes de mesure
NF EN 60512-21-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 21-1 : essais de résistance aux fréquences radioélectriques - Essai 21a : résistance parallèle aux fréquences radioélectriques
NF C93-560-1-6*NF EN IEC 61169-1-6:2022 Radio-frequency connectors - Part 1-6 : electrical test methods - RF power
NF EN IEC 61169-1-6:2022 Connecteurs pour fréquences radioélectriques Partie 1-6 : méthodes d'essai électrique - Puissance RF
NF C97-010-2*NF EN 61260-2:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2 : pattern-evaluation tests
NF C97-010-2/A1*NF EN 61260-2/A1:2017 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2 : pattern-evaluation tests
NF EN 61260-2:2016 Électroacoustique - Filtres de bande d'octave et de bande d'une fraction d'octave - Partie 2 : essais d'évaluation d'un modèle
NF EN 61260-2/A1:2017 Electroacoustique - Filtres de bande d'octave et de bande d'une fraction d'octave - Partie 2 : essais d'évaluation d'un modèle
NF T70-347:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of graphite content in secondary explosives by extraction.
NF S97-001-1/IN1*NF EN 455-1/IN1:2022 Medical gloves for single use - Part 1 : requirements and testing for freedom from holes
NF S97-001-1*NF EN 455-1+A1:2022 Medical gloves for single use - Part 1 : requirements and testing for freedom from holes
NF EN ISO 12156-1:2018 Carburant diesel - Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence (HFRR) - Partie 1 : méthode d'essai
NF C93-371-2:2005 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2 : test methods for non-electrical characteristics.
NF C93-805-1-1:2007 Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method.
NF A92-801-4*NF EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4 : determination of chemical composition by electron probe microanalysis (EPMA).
NF B42-012*NF EN 725-12:2002 Advanced technical ceramics - Methods of test for ceramic powders - Part 12 : chemical analysis of zirconia.
NF C41-102:1995 High-voltage test techniques. Part 2 : measuring systems.
NF EN IEC 62025-2:2019 Composants inductifs à haute fréquence - Caractéristiques non électriques et méthodes de mesure - Partie 2 : méthodes d'essai pour caractéristiques non électriques
NF C93-805-5-1:2001 Optical fibre amplifiers - Basic specification - Part 5-1 : test methods for reflectance parameters - Optical spectrum analyser.
NF C93-805-2-2*NF EN 61290-2-2:1998 Optical fibre amplifiers. Basic specification. Part 2-2 : test methods for optical power parameters. Electrical spectrum analyzer.
NF X70-100-1:2006 Essais de comportement au feu - Analyse des effluents gazeux - Partie 1 : méthodes d'analyses des gaz provenant de la dégradation thermique
NF G06-006-1*NF EN ISO 1833-1:2020 Textiles - Quantitative chemical analysis - Part 1 : general principles of testing
NF EN ISO 1833-1:2020 Textiles - Analyse chimique quantitative - Partie 1 : principes généraux des essais
NF B42-001-4*NF EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4 : determination of oxygen content in aluminium nitride by XRF analysis.
NF S97-001-2:2013 Medical gloves for single use - Part 2: requirements and testing for physical properties
NF S97-001-2/IN2:2013 Medical gloves for single use - Part 2: requirements and testing for physical properties
NF S97-001-2*NF EN 455-2:2015 Medical gloves for single use - Part 2 : requirements and testing for physical properties

ES-UNE, Analysis test part high frequency

UNE-EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN IEC 62984-3:2020 High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN 61290-5-2:2004 Optical amplifiers - Test methods -- Part 5-2: Reflectance parameters - Electrical spectrum analyser method (Endorsed by AENOR in September of 2004.)
UNE-EN 61290-3-2:2008 Optical amplifier test methods -- Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (Endorsed by AENOR in February of 2009.)
UNE-EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (Endorsed by AENOR in July of 2016.)
UNE-EN 61290-1-2:2005 Optical amplifiers - Test methods -- Part 1-2: Power and gain parameters - Electrical spectrum analyzer method (Endorsed by AENOR in March of 2006.)
UNE-EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (Endorsed by AENOR in October of 2010.)
IEC 60060:2023 SER High-voltage test techniques - ALL PARTS
UNE-EN ISO 12156-1:2019 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2018)
UNE-EN 61260-3:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests (Endorsed by AENOR in July of 2016.)
UNE-EN IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (Endorsed by Asociación Española de Normalización in December of 2019.)
UNE-EN IEC 61169-1-6:2023 Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
UNE-EN 61260-2:2016/A1:2017 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests (Endorsed by Asociación Española de Normalización in August of 2017.)
UNE-EN 61260-2:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests (Endorsed by AENOR in July of 2016.)
UNE-EN 455-1:2020+A1:2022 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
UNE-EN 12441-8:2004 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method (Endorsed by AENOR in March of 2005.)
UNE-EN ISO 1833-1:2021 Textiles - Quantitative chemical analysis - Part 1: General principles of testing (ISO 1833-1:2020)

Korean Agency for Technology and Standards (KATS), Analysis test part high frequency

KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
KS V 8890-2019 Dynamic range measurement test procedure of frequency analysis system for ships
KS C IEC 60645-4-2007(2012) Audiometers－Part 4：Equipment for extended high-frequency audiometry
KS M ISO 11093-8:2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS M ISO 11093-8:2014 Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS C IEC 60270:2020 High-voltage test techniques — Partial discharge measurements
KS R ISO 12156-1:2018 Diesel fuel－Assessment of lubricity using the high-frequency reciprocating rig(HFRR)－Part 1：Test method
KS C IEC 60645-4:2007 Audiometers-Part 4:Equipment for extended high-frequency audiometry
KS C IEC 60645-4:2014 Audiometers－Part 4：Equipment for extended high-frequency audiometry
KS C IEC 62025-2:2018 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 2: Test methods for non-electrical characteristics
KS C IEC 60270:2006 High-voltage test techniques－Partial discharge measurements
KS C IEC 60068-2-81:2020 Environmental testing — Part 2-81: Tests — Test Ei: Shock —Shock response spectrum synthesis
KS C IEC 60060-1:2019 High-voltage test techniques -Part 1: General definitions and test requirements
KS C IEC 61180-2-2006(2016) High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
KS C IEC 60060-2:2001 High-voltage test techniques－Part 2：Measuring Systems
KS E ISO 5071-1:2007 Brown coals and lignites－Determination of the volatile matter in the analysis sample－Part 1：Two-furnace method
KS K ISO 1833-1:2018 Textiles — Quantitative chemical analysis — Part 1: General principles of testing
KS M ISO 11093-8:2008 Paper and board-Testing of cores-Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
KS R ISO 12156-2:2021 Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig(HFRR) — Part 2: Limit
KS C IEC 60060-3-2014(2019) High-voltage test techniques — Part 3: Definitions and requirements for on-site testing

Professional Standard - Non-ferrous Metal, Analysis test part high frequency

YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
YS/T 710.3-2009 Method for chemical analysis of cobalt oxide.Part 3:Determination of sulphur content.High frequency combustion-infrared absorption method
YS/T 1028.4-2015 Methods for chemical analysis of lithium iron phosphate.Part 4:Determination of carbon content.High frequency combustion with infrared absorption method
YS/T 861.4-2013 Methods for chemical analysis of niobium-titanium alloy.Part 4:Determination of carbon content.The high-frequency infrared absorption method
YS/T 281.13-2011 Methods for chemical analysis of cobalt.Part 13:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
YS/T 281.14-2011 Methods for chemical analysis of cobalt.Part 14:Determination of carbon content.Infra-red absorption method after high frequency induction furnace combustion
YS/T 426.7-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of carbon content.High frequency-infrared absorption method
YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method
YS/T 904.5-2013 Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method
YS/T 1605.12-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 12:Determination of carbon and sulfur contents — High frequency combustion infrared absorption method
YS/T 1075.6-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 6:Determination of carbon content.High frequency combustion infrared absorption method
YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
YS/T 281.14-1994 Cobalt - Determination of sulphur content - Infra-red absorption method after high frequency induction furnace combustion
YS/T 281.15-1994 Cobalt - Determination of carbon content - Infra-red absorption method after high frequency induction furnace combustion
YS/T 953.9-2014 Methods for chemical analysis of fire smelting nickel substrate material.Part 9:Determination of carbon and sulfur contents.Infrared absorption method after high frequency combustion
YS/T 36.1-2011 Methods for chemical analysis of high-purity Tin.Part 1:Determination of arsenic content.Arsenic stain method
YS/T 38.1-2009 Chemical analysis methods of high pure gallium.Part 1:Determination of silicon content.Molybdenum blue spectrophotomerty
YS/T 36.2-2011 Methods for chemical analysis of high-purity Tin.Part 2:Determination of antimony content.Malachite green spectrophotometry
YS/T 244.2-2008 Chemical analysis methods of high purity aluminum.Part 2: Determination of silicon content by extraction-molybdenum blue photonEetrie method
YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
YS/T 244.7-2008 Chemical andysis methods of high purity aluminum.Part 7: Determination of cadmium content by extraction-dithizone photometric method
YS/T 244.8-2008 Chemical analysis methods of high purity aluminum.Part 8: Determination of indium content by extraction-crystal violet photometric method
YS/T 514.8-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 8:Determination of phosphorus content.Antimony molybdenum blue spectrophotometry

SE-SIS, Analysis test part high frequency

SIS 11 01 05 E-1951
SIS SS IEC 270:1983 High-voltage test techniqes Partial discharge measurements

Professional Standard - Electron, Analysis test part high frequency

SJ 20495-1995 Test methods for RF network analyzer(system)

工业和信息化部, Analysis test part high frequency

YS/T 540.3-2018 Methods for chemical analysis of vanadium Part 3: Determination of carbon content High frequency combustion infrared absorption method
YS/T 1562.4-2022 Methods for chemical analysis of tungsten-copper alloys Part 4: Determination of carbon content High-frequency combustion infrared absorption method
YS/T 424.4-2022 Methods for chemical analysis of titanium diboride powder Part 4: Determination of carbon content High-frequency combustion infrared absorption method
XB/T 622.5-2017 Methods for chemical analysis of rare earth hydrogen storage alloys Part 5: Determination of carbon content High frequency combustion infrared absorption method
YS/T 1563.5-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 5: Determination of carbon and sulfur content High-frequency combustion infrared absorption method
YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
YS/T 1585.4-2022 Methods for chemical analysis of silver-tungsten alloys Part 4: Determination of carbon content High-frequency induction furnace combustion infrared absorption method
YS/T 1057.5-2022 Methods for chemical analysis of cobalt tetroxide Part 5: Determination of carbon content High-frequency combustion-infrared absorption spectrometry
YS/T 1509.2-2021 Chemical analysis method of silicon-carbon composite anode materials Part 2: Determination of carbon content High-frequency heating infrared absorption method
YS/T 1489.7-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 7: Determination of carbon content High-frequency combustion infrared absorption method
YS/T 1345.3-2020 Methods for chemical analysis of bismuth-rich lead Part 3: Determination of gold and silver content Fire gold gravimetric method
YS/T 1288.2-2018 Methods for chemical analysis of high-purity zinc Part 2: Determination of lead and cadmium amounts by polarographic method
YS/T 1115.9-2016 Methods for chemical analysis of copper ores and tailings Part 9: Determination of sulfur content High-frequency infrared absorption method and combustion-potassium iodate titration method
YS/T 1345.2-2020 Methods for chemical analysis of bismuth-rich lead Part 2: Determination of bismuth content Na2EDTA titration method
YS/T 1345.1-2020 Methods for chemical analysis of high bismuth lead - Part 1: Determination of lead content Na2EDTA titration method
YS/T 1345.6-2020 Methods for chemical analysis of high bismuth lead Part 6: Determination of tin content Potassium iodate titration method
YS/T 1342.4-2019 Methods for chemical analysis of secondary battery waste Part 4: Determination of lithium content Flame atomic absorption spectrometry

GOSTR, Analysis test part high frequency

GOST R IEC 62984-2-2020 High-temperature secondary batteries. Part 2. Safety requirements and tests methods
GOST R IEC 62984-3-2020 High-temperature secondary batteries. Part 3. Sodium-based batteries. Performance requirements and test methods
GOST R IEC 62984-1-2020 High-temperature secondary batteries. Part 1. General requirements and test methods

Professional Standard - Rare Earth, Analysis test part high frequency

XB/T 614.3-2011 Chemical analysis method of gadolinium-magnesium alloy.Part 3:Determination of carbon content.High frequency-infrared absorption method
XB/T 617.6-2014 Chemical analysis methods of neodymium iron boron alloy.Part 6:Determination of carbon content.High frequency-infrared absorption method
XB/T 601.9-1993 Lanthanum hexaboride chemical analysis method Determination of carbon content by high frequency induction combustion infrared absorption method
XB/T 601.4-2008 Chemical analysis methods of lanthanum boride.Determination of carbon content.High frequency induced combustion infrared ray absorbs method

Professional Standard - Aviation, Analysis test part high frequency

HB 5220.3-2008 Methods for chemical analysis of super alloys. Part 3: Determination of carbon content by high frequency induction combustion-infrared absorption method
HB 5220.6-2008 Methods for chemical analysis of superalloys.Part 6:Determination of sulfur content by high frequency induction combustion-infrared absorption method
HB 5297.14-1984 Determination of Carbon Content in Titanium and Titanium Alloys High Frequency Heating - Coulomb Analysis
HB 5220.3-1995 High-frequency Induction Heating-Infrared Absorption Method for Chemical Analysis of Superalloys Determination of Carbon Content
HB 5220.6-1995 High-frequency induction heating-infrared absorption method for chemical analysis of superalloys Determination of sulfur content
HB 5220.19-2008 Methods for chemical analysis of superalloys. Part 19: Determination of aluminum content by cupferron, cupron separation-EDTA volumetric method
HB 5297.22-2001 Titanium Alloy Chemical Analysis Method High Frequency Induction Heating-Infrared Absorption Method Determination of Carbon Content
HB 5220.1-2008 Methods for chemical analysis of superalloys. Part 1: Determination of carbon content by coulometric method
HB 5220.9-2008 Methods for chemical analysis of superalloys.Part 9: Determination of silicon content by gravimetric method
HB 5220.13-2008 Methods for chemical analysis of superalloys. Part 13: Determination of manganese content by potassium periodate photometric method
HB 5220.19-1995 Method for chemical analysis of superalloys-Separation of copper-iron reagents and copper reagents-EDTA volumetric method for determination of aluminum content
HB 5220.21-2008 Methods for chemical analysis of superalloys.Part 21: Determination of molybdenum content by EDTA volumetric method
HB 5220.27-2008 Methods for chemical analysis of superalloys. Part 27: Determination of copper content by cupral-ethyle ether extraction photometric method
HB 5220.2-2008 Methods for chemical analysis of superalloys.Part 2: Determination of carbon content by gasometric method
HB 5220.5-2008 Methods for chemical analysis of superalloys.Part 5:Determination of sulfur content by potassium iodate volumetric method
HB/Z 5218.4-2004 Methods for chemical analysis of aluminium alloys-Part 4:Determination of manganese content by potassium periodate spectrophotometric method
HB 5220.17-2008 Methods for chemical analysis of superalloys. Part 17: Determination of vanadium content by N-benzyl-N-phenylhydroxylamine-chloroform extraction photometric method
HB 5220.29-2008 Methods for chemical analysis of superalloys. Part 29: Determination of iron content by potassium dichromate volumetric method
HB 5220.50-2008 Methods for chemical analysis of superalloys. Part 50: Determination of hydrogen content by impulse heating-thermal conductivity method
HB 5220.37-2008 Methods for chemical analysis of superal loys. Part 37: Determination of zirconium content by N-benzoyl-N-phenylhydroxylamine-benzene extraction-arsenazo Ⅲ photometric method

Group Standards of the People's Republic of China, Analysis test part high frequency

T/QAS 081.1-2023 Chemical Analysis of Polymetallic Minerals Part 1: Determination of Carbon and Sulfur by High Frequency Combustion Infrared Absorption Method
T/ITS 0184-2021 Testing specifications for intelligent analysis function of road cameras
T/CSTM 00660.1-2023 Methods for chemical analysis of titanium carbide slag— Part 1:Determination of free carbon content—High frequency combustion with infrared absorption method
T/CWAN 0029.2-2021 Chemical analysis methods of nickel-based welding materials Part 2: Determination of carbon and sulfur content by infrared absorption method of high-frequency induction furnace combustion
T/UWA 005.3-1-2022 High Dynamic Range (HDR) Video Technology Part 3-1: Technical Requirements and Test Methods for Display Equipment
T/UWA 005.3-4-2022 High Dynamic Range (HDR) Video Technology Part 3-4: Technical Requirements and Test Methods Playback Software
T/UWA 005.3-3-2022 High Dynamic Range (HDR) Video Technology Part 3-3: Technical Requirements and Test Methods Playback Equipment

Professional Standard - Electricity, Analysis test part high frequency

DL/T 846.11-2016 General Specifications for High Voltage Test Equipment Part 11: UHF Partial Discharge Detector
DL/T 1694.1-2017 Calibration specifications for high-voltage testing instruments and equipment Part 1: UHF partial discharge on-line monitoring device
DL/T 848.2-2004 General technical specification of high voltage test devices Part 2: power frequency high voltage test device
DL/T 848.2-2018 General Specifications for High Voltage Test Devices Part 2: Power Frequency High Voltage Test Devices
DL/T 1694.6-2020 Calibration specifications for high-voltage testing instruments and equipment Part 6: Ultra-low frequency dielectric loss tester for power cables
DL/T 849.4-2004 General technical specification of test instruments used for power equipments Part 4: very low frequency high voltage generator
DL/T 846.1-2004 General technical specifications for high voltage test equipments Part 1: high voltage divider measuring system
DL/T 846.1-2016 General Specifications for High Voltage Test Equipment Part 1: High Voltage Divider Measurement System
DL/T 848.4-2004 General technical specification of high voltage test devices Part 4: triple-frequency test transformer
DL/T 848.4-2019 General technical requirements for high-voltage test equipment Part 4: Triple frequency test transformer equipment
DL/T 846.3-2004 General technical specifications for high voltage test equipments Part 3: high voltage switch integrate detector

Standard Association of Australia （SAA）, Analysis test part high frequency

AS 1931.2/AMD 1:1997 Amendment No.1 to AS 1931.2-1996 High-voltage test techniques Part 2: Measuring systems
AS 1038.21.1.1:1994 Coal and coke - Analysis and testing Part 21.1.1:Higher rank coal and coke - Relative density - Analysis sample /density bottle method
AS 1038.6.1:1997(R2013)
AS 1038.18:1996 Coal and coke - Analysis and testing Part 18: Coke - Size analysis
AS 1038.19:2000(R2013)
AS 1038.6.2:2007 Coal and coke - Analysis and testing - Higher rank coal and coke - Ultimate analysis - Nitrogen
AS 1038.17:2000(R2013)
AS 1038.21.1.2:2002(R2013)
AS 1038.8.2:2003(R2013)
AS 1038.20:2002(R2013)
AS 2542.2.2:2014 Sensory analysis, Part 2.2: Methodology — Triangle test
AS 1038.21.2:1992 Coal and coke. Analysis and testing. Part 21.2: Higher rank coal and coke. Relative density. Lump sample
AS 1038.14.3:1999 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Wavelength dispersive X-ray fluorescence spectrometric method
AS 1038.22:2000(R2013)
AS 1038.23:2002(R2013)
AS 2542.2.4:2014 Sensory analysis, Part 2.4: Methodology — Duo-trio test
AS IEC 61260.3:2019 Electroacoustics — Octave‑band and fractional‑octave‑band filters, Part 3: Periodic tests
AS 1038.9.1:2000(R2013)
AS IEC 60060.2:2018 High-voltage test techniques, Part 2: Measuring systems
AS IEC 61260.2:2019 Electroacoustics — Octave‑band and fractional‑octave‑band filters, Part 2: Pattern evaluation tests
AS 4156.1.1:2018 Coal preparation, Part 1.1: Higher rank coal — Float and sink testing
AS 1038.9.2:2000(R2013)
AS 1038.14.2:2003 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Acid digestion/flame atomic absorption spectrometric method
AS IEC 60060.1:2018 High-voltage test techniques, Part 1: General definitions and test requirements
AS 1038.14.1:2003 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Borate fusion/flame atomic absorption spectrometric method
AS 1038.12.2:1999 Coal and coke - Analysis and testing - Higher rank coal - Caking and coking properties - Determination of Gray-King coke type

PL-PKN, Analysis test part high frequency

PN-EN IEC 62984-2-2020-12 E High-temperature secondary batteries - Part 2: Safety requirements and tests (IEC 62984-2:2020)
PN-EN IEC 62984-3-2021-01 E High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests (IEC 62984-3:2020)

Professional Standard - Post and Telecommunication, Analysis test part high frequency

YD/T 647-1994 Quality grading criteria of HF and LF noise testers

IT-UNI, Analysis test part high frequency

UNI 7771-1977 Chemical analysis of ferroalloys. Determination of carbon. Method by combustion in high frequency induction furnace.
UNI 7949-1979 Chemical analysis of ferroalloys. Determination of sulfur in ferromanganese. Method by combustion in a high frequency induction furnace.

Professional Standard - Customs, Analysis test part high frequency

HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

Danish Standards Foundation, Analysis test part high frequency

DS/EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyzer method
DS/EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
DS/EN 61290-1-2:2006 Optical amplifiers - Test methods -- Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
DS/EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance
DS/EN 60645-4:1996 Audiometers - Part 4: Equipment for extended high-frequency audiometry
DS/EN ISO 12156-1:2007 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
DS/EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
DS/EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
DS/EN 62025-2:2005 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
DS/EN 12441-8:2005 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
DS/EN 60060-1:2011 High-voltage test techniques – Part 1: General definitions and test requirements
DS/EN ISO 1833-1:2010 Textiles - Quantitative chemical analysis - Part 1: General principles of testing
DS/EN 725-12:2001 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia
DS/IEC/TR 60493-2:2010 Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data
DS/EN 455-1:2003 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
DS/EN 12350-11:2011 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Analysis test part high frequency

GB/T 13747.24-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 24：Determination of carbon content—Infrared absorption method after high frequency combustion
GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method
GB/T 1819.10-2017 Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method

International Electrotechnical Commission (IEC), Analysis test part high frequency

IEC 62984-2:2020 High-temperature secondary batteries – Part 2: Safety requirements and tests
IEC 60060:2022 High-voltage test techniques - ALL PARTS
IEC 60060:2023 High-voltage test techniques - ALL PARTS
IEC 62984-3:2020 High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests
IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters; Electrical spectrum analyser method
IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
IEC 60270:2000 High-voltage test techniques - Partial discharge measurements
IEC 60270:2015 High-voltage test techniques - Partial discharge measurements
IEC 62025-2:2005 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
IEC 61290-3-2:2003 Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method
IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61097-8:1998 Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and r
IEC 60060-3:1976 High-voltage test techniques. Part 3 : Measuring devices
IEC 60060-2:1994 High-voltage test techniques - Part 2: Measuring systems
IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
IEC 61290-10-2:2003 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer

Military Standard of the People's Republic of China-General Armament Department, Analysis test part high frequency

GJB 5309.32-2004 Test methods for pyrotechnics Part 32: High frequency vibration test
GJB 383.24-1994 Telemetry system, subsystem test method and high frequency power amplifier test method
GJB 383.2A-1997 Telemetry system and sub-system test methods Telemetry high-frequency preamplifier test methods
GJB 383.2-1987 Telemetry system and sub-system test methods Telemetry high-frequency preamplifier test methods
GJB 8682.8-2015 Methods for chemical analysis of pyrotechnics Part 8: Determination of hexamethylenetetramine content Acid-base titration method
GJB 5309.12-2004 Test methods for pyrotechnics Part 12: Radio frequency impedance determination

British Standards Institution (BSI), Analysis test part high frequency

19/30355514 DC BS EN 62984-1. High temperature secondary batteries. Part 1. General aspects, definitions and tests
19/30363050 DC BS EN IEC 62676-6. Video surveillance systems for use in security applications - Part 6. Video content analytics. Performance testing and grading
19/30359905 DC BS EN 62984-3-2. High temperature secondary batteries. Part 3. Sodium-based batteries. Performance requirements and tests
BS 1016-106.4.2:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. High temperature combustion method
BS 3156-11.6:1997 Analysis of fuel gases - Methods for non-manufactured gases - Determination of water content at high pressure
BS 1016-106.1.1:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbon and hydrogen content. High temperature combustion method
BS EN 60270:2001 High-voltage test techniques - Partial discharge measurements
19/30359901 DC BS EN 62984-3-1. High temperature secondary batteries. Part 2. Safety requirements and tests of cells and batteries
BS 3907-4:1966 Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method)
23/30464180 DC BS ENISO 12156-1 Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1. Test method
BS 3907-5:1966 Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)
BS EN 60060-2:1995 High-voltage test techniques. Measuring systems
BS EN 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
BS EN 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
BS EN 61290-1-1:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
BS EN 61290-1-2:2007 Optical amplifiers. Test methods. Power and gain parameters. Electrical spectrum analyzer method
BS EN 61290-1-1:2007 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
BS 7317-5:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of sulphur by hydrogen sulphide evolution and spectrophotometry

Professional Standard - Nuclear Industry, Analysis test part high frequency

EJ/T 1212.10-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part10: Determination of carbon by high-frequency inductive combustion-infrared detection method

CENELEC - European Committee for Electrotechnical Standardization, Analysis test part high frequency

EN 61290-3-2:2003 Optical amplifiers Part 3-2: Test methods for noise figure parameters Electrical spectrum analyzer method
EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance
EN 60645-4:1995 Audiometers Part 4: Equipment for Extended High-Frequency Audiometry
EN 61290-2-2:1998 Optical Fibre Amplifiers - Basic Specification Part 2-2: Test Methods for Optical Power Parameters Electrical SPectrum Analyzer
EN 61290-5-1:2000 Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test Methods for Reflectance Parameters - Optical Spectrum Analyser
EN 60060-2:1994 High-Voltage Test Techniques - Part 2: Measuring Systems (Incorporates Amendment A11: 1998)
EN 61290-1-2:1998 Optical Fibre Amplifiers - Basic Specification Part 1-2: Test Methods for Gain Parameters Electrical Spectrum Analyzer

German Institute for Standardization, Analysis test part high frequency

DIN EN 61290-3-2:2009-06 Optical amplifier - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2008); German version EN 61290-3-2:2008 / Note: DIN EN 61290-3-2 (2003-08) remains valid alongside this standard until 2011-10-01....
DIN EN 61290-1-2:2006-07 Optical amplifier - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method (IEC 61290-1-2:2005); German version EN 61290-1-2:2005 / Note: DIN EN 61290-1-2 (1999-08) remains valid alongside this standard until 2008-10-0...
DIN EN ISO 12156-1:2019-09 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2018); German version EN ISO 12156-1:2018
DIN EN 61290-5-2:2004-12 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method (IEC 61290-5-2:2003); German version EN 61290-5-2:2004
DIN 51604-1:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 1: Testing Fluid A
DIN 10967-4:2002 Sensory analysis - Investigation of profiles - Part 4: Testing plans
DIN EN 61260-3:2016-09 Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests (IEC 61260-3:2016); German version EN 61260-3:2016
DIN EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method (IEC 61290-5-2:2003); German version EN 61290-5-2:2004
DIN 51769-6:1990 Determination of total lead content of petrol with a lead content exceeding 25 mg/l by wavelenght-dispersive X-ray spectrometry (XRS)
DIN EN 12350-11:2010-12 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test; German version EN 12350-11:2010
DIN EN 61260-2:2018-01 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests (IEC 61260-2:2016 + AMD1:2017); German version EN 61260-2:2016 + A1:2017
DIN 51604-2:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN EN 455-1:2022-04 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2020+A1:2022 / Note: To be amended by DIN EN 455-1/A2 (2023-01).
DIN EN 60270:2001 High-voltage test techniques - Partial discharge measurement (IEC 60270:2000); German version EN 60270:2001
DIN EN 62025-2:2005 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2005); German version EN 62025-2:2005
DIN EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) English version of DIN EN 1071-4:2006-05
DIN EN ISO 1833-1:2020-09 Textiles - Quantitative chemical analysis - Part 1: General principles of testing (ISO 1833-1:2020); German version EN ISO 1833-1:2020
DIN ISO 11093-8:2018 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2017)
DIN 10751-3:2018 Analysis of honey - Determination of content of hydroxymethylfurfural - Part 3: High performance liquid chromatographic method
DIN 10751-3:2002 Analysis of honey - Determination of the content of hydroxymethylfurfural - Part 3: High performance liquid chromatographic method
DIN 10751-3:2018-09 Analysis of honey - Determination of content of hydroxymethylfurfural - Part 3: High performance liquid chromatographic method
DIN 58960-2:1997-05 Photometer for analytical tests - Part 2: Technical design; classification, components, concepts
DIN EN ISO 12460-3/A1:2022-10 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method - Amendment 1: Laser spectroscopy (ISO 12460-3:2020/DAM 1:2022); German and English version EN ISO 12460-3:2020/prA1:2022 / Note: Date of issue 2022-08-26*Intended ...
DIN EN 455-4:2009-10 Medical gloves for single use - Part 4: Requirements and testing for shelf life determination; German version EN 455-4:2009
DIN EN IEC 62025-2:2021-11 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2019); German version EN IEC 62025-2:2019 / Note: DIN EN 62025-2 (2005-08) remains valid a...
DIN ISO 16000-39:2020-12 Indoor air - Part 39: Determination of amines - Analysis of amines by (ultra-) high-performance liquid chromatography coupled to high resolution or tandem mass spectrometry (ISO 16000-39:2019)
DIN EN 455-1:2020 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes

ESDU - Engineering Sciences Data Unit, Analysis test part high frequency

TM 189-2018 Techmical Memorandum Analysis of Tests on a Convergent Nozzle in an Altitude Test Facility

KR-KS, Analysis test part high frequency

KS M ISO 11093-8-2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS C IEC 60270-2020 High-voltage test techniques — Partial discharge measurements
KS R ISO 12156-1-2018 Diesel fuel－Assessment of lubricity using the high-frequency reciprocating rig(HFRR)－Part 1：Test method
KS C IEC 62025-2-2018 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 2: Test methods for non-electrical characteristics
KS C IEC 60068-2-81-2020 Environmental testing — Part 2-81: Tests — Test Ei: Shock —Shock response spectrum synthesis
KS C IEC 60060-1-2019 High-voltage test techniques -Part 1: General definitions and test requirements
KS K ISO 1833-1-2018 Textiles — Quantitative chemical analysis — Part 1: General principles of testing
KS R ISO 12156-2-2021 Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig(HFRR) — Part 2: Limit

未注明发布机构, Analysis test part high frequency

BS 1016-14:1963(1999) Methods for The analysis and testing of coal and coke — Part 14 : Analysis of coal ash and coke ash
BS 1016-6:1977(1999) Methods for Analysis and testing of coal and coke — Part 6 : Ultimate analysis of coal
DIN EN 196-2:1995 Methods of testing cement — Part 2: Chemical analysis of cement
BS 1016-1:1973(1999) Methods for The analysis and testing of coal and coke — Part 1 : Total moisture of coal
BS 3762-2:1989(2011) Analysis of formulated detergents — Part 2 : Qualitative test methods
BS 1016-104.1:1991(1999) Methods for Analysis and testing of coal and coke — Part 104 : Proximate analysis — Section 104.1 Determination of moisture contentofthe general analysis sample ofcoal
BS EN 455-1:2020 Medical gloves for single use Part 1 : Requirements and testing for freedom from holes
BS 1016-104.2:1991(1999) Methods for Analysis and testing of coal and coke — Part 104 : Proximate analysis — Section 104.2 Determination of moisture content of the general analysis sample of coke
BS 923-1:1990(1999) Guide on High - voltage testing techniques — Part 1 : General
BS 903-5:2004(2011) Physical testing of rubber — Part 5 : Guide to the application of rubber testing to finite element analysis
DIN EN 61169-1:1995 High-frequency connectors Part 1: Basic specification General requirements and measurement methods

Japanese Industrial Standards Committee (JISC), Analysis test part high frequency

JIS C 6122-1-2:2011 Optical amplifiers -- Test methods -- Part 1-2: Power and gain parameters -- Electrical spectrum analyzer method
JIS C 6122-1-1:2011 Optical amplifiers -- Test methods -- Part 1-1: Power and gain parameters -- Optical spectrum analyzer method
JIS C 62025-2:2009 High frequency inductive components -- Non-electrical characteristics and measuring methods -- Part 2: Test methods for non-electrical characteristics
JIS L 1030-2:1998 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 2: Testing methods for quantitative analysis of fibre mixtures
JIS C 1513-3:2021 Electroacoustics -- Octave-band and 1/N (fractional) -octave-band filters -- Part 3: Periodic tests
JIS C 6122-3-2:2006 Optical amplifiers -- Test methods -- Part 3-2: Noise figure parameters -- Electrical spectrum analyzer method
JIS L 1030-3-1:2023 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 3-1: Instrumental analysis of some animal hair fibres -- Using MALDI-TOF MS testing methods for quantitative analysis of fibre mixtures
JIS C 1513-2:2021 Electroacoustics -- Octave-band and 1/N (fractional) -octave-band filters -- Part 2: Pattern evaluation tests
JIS C 6122-3-1:2011 Optical amplifiers -- Test methods -- Part 3-1: Noise figure parameters -- Optical spectrum analyzer method
JIS L 1030-1:2006 Testing methods for quantitative analysis of fibre mixtures -- Part 1: Testing methods for fibre identification
JIS L 1030-1:2012 Testing methods for quantitative analysis of fibre mixtures -- Part 1: Testing methods for fibre identification
JIS L 1030-1:1998 Testing methods for quantitative analysis of fiber mixtures -- Part 1: Testing methods for fiber identification

European Committee for Standardization (CEN), Analysis test part high frequency

DD ENV 843-5-1996 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Tests at Room Temperature - Part 5: Statistical Analysis
EN 1744-1:1998 Tests for Chemical Properties of Aggregates - Part 1: Chemical Analysis
EN ISO 12156-1:2023 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2023)
EN ISO 12156-1:2000 Diesel Fuel - Assessment of Lubricity Using the High-Frequency Reciprocating Rig (HFRR) - Part 1: Test Method ISO 12156-1:1997, Including Technical Corrigendum 1:1998
EN ISO 12156-1:2018 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2018)
EN 725-12:2001 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia
EN 455-3:2006 Medical Gloves for Single Use - Part 3: Requirements and Testing for Biological Evaluation
EN 455-3:1999 Medical Gloves for Single Use - Part 3: Requirements and Testing for Biological Evaluation
EN 455-3:2015 Medical gloves for single use - Part 3: Requirements and testing for biological evaluation

International Organization for Standardization (ISO), Analysis test part high frequency

ISO 11093-8:2012 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-8:2017 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO/DIS 12156-1 Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method
ISO 11358-2:2005 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
ISO 11358-2:2014 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
ISO 11358-2:2021 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
ISO 11093-8:2012/cor 1:2013 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis; Technical Corrigendum 1
ISO 16000-39:2019 Indoor air — Part 39: Determination of amines — Analysis of amines by (ultra-) high-performance liquid chromatography coupled to high resolution or tandem mass spectrometry
ISO/IEC 13818-4:1998/Amd 1:1999 Information technology — Generic coding of moving pictures and associated audio information — Part 4: Conformance testing — Amendment 1: Advanced Audio Coding (AAC) conformance testing
ISO/IEC 14496-4:2004/Amd 8:2005/Cor 1:2008 Information technology - Coding of audio-visual objects - Part 4: Conformance testing; Amendment 8: High Efficiency Advanced Audio Coding, audio BIFS, and structured audio conformance
ISO 11358-3:2013 Plastics.Thermogravimetry (TG) of polymers.Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics

IN-BIS, Analysis test part high frequency

IS 2720 Pt.4-1986
IS 2720 Pt.4-1985
IS 2071 Pt.2-1974
IS 8687 Pt.1-1977
IS 2974 Pt.3-1992 Design and construction of machine foundations. Code of practice. Part 3: Foundations for rotary type machines (medium and high frequency) (Second Revision)
IS 1350 Pt.1-1984
IS 2071 Pt.3-1976
IS 2720 Pt.18-1992 Methods of test for soils. Part 18: Determination of field moisture equivalent (First Revision)
IS 228 Pt.16-1992 Methods for chemical analysis of steels. Part 15: Determination of tungsten by spectrophotometric method (for tungsten 0.1 to percent) (Second Revision)
IS 2720 Pt.19-1992 Methods of test for soils. Part 18: Determination of cemtrofige ,postire equivalent (First Revision)
IS 2071 Pt.1-1993
IS 2600 Pt.4-1993 Methods of chemical analysis of zinc and zinc base alloys for die castings. Part 4: Determination of chromium by spectrophotometric method (First Revision)
IS 9741 Pt.1-1981

TR-TSE, Analysis test part high frequency

TS 3009-1978 High - Voltage Test Techniques Part: 2 Test Procedures
TS 3008-1978 HIGH - VOLTAGE TEST TECHNIQUES PART 1 - GENERAL DEFINITIONS AND TEST REQUIREMENTS

American Society for Testing and Materials (ASTM), Analysis test part high frequency

ASTM G144-96 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM G144-01(2006) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G144-01(2022) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G144-01(2014) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G144-01 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM F2931-19 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2931-16 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2931-15 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2931-19a Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2931-16e1 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

Lithuanian Standards Office , Analysis test part high frequency

LST EN 61290-5-2-2004 Optical amplifiers. Test methods. Part 5-2: Reflectance parameters. Electrical spectrum analyser method (IEC 61290-5-2:2003)
LST EN 60512-21-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010)
LST EN ISO 15792-2:2020 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
LST EN 1071-4-2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
LST EN 61290-1-2-2006 Optical amplifiers. Test methods. Part 1-2: Power and gain parameters. Electrical spectrum analyzer method (IEC 61290-1-2:2005)
LST EN 61290-3-2-2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2008)
LST EN 60645-4-2000 Audiometers. Part 4: Equipment for extended high-frequency audiometry (IEC 60645-4:1994)
LST EN 12441-8-2005 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
LST EN 725-12-2003 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia
LST EN 455-1-2001 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
LST EN 12350-11-2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test

Canadian Standards Association (CSA), Analysis test part high frequency

CAN/CSA-ISO/IEC 14496-4H:2006 Information technology - Coding of audio-visual objects - Part 4: Conformance testing AMENDMENT 8: High Efficiency Advanced Audio Coding, audio BIFS, and structured audio conformance
CSA ISO/IEC 14496-4-06-CAN/CSA AMD 8 CORR 1:2009 Information technology ?Coding of audio-visual objects ?Part 4: Conformance testing AMENDMENT 8: High Efficiency Advanced Audio Coding, audio BIFS, and structured audio conformance
CSA ISO/IEC 10373-6-02:2002 Identification cards Test methods Part 6: Proximity cards ISO/IEC 10373-6:2001
CSA ISO/IEC 14496-4-06-CAN/CSA AMD 8:2006 Information technology - Coding of audio-visual objects - Part 4: Conformance testing AMENDMENT 8: High Efficiency Advanced Audio Coding, audio BIFS, and structured audio conformance

ZA-SANS, Analysis test part high frequency

SANS 408:2007 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Wavelength dispersive X-ray fluorescence spectrometric method
SANS 414:2006 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Acid digestion/flame atomic absorption spectrometric method
SANS 60060-2:1994 High-voltage test techniques Part 2: Measuring systems
SANS 1833-1:2007 Textiles - Quantitative chemical analysis Part 1: General principles of testing

International Telecommunication Union (ITU), Analysis test part high frequency

ITU-R BS.467 SPANISH-1970 Technical Characteristics to be Checked for Frequency-Modulation Stereophonic Broadcasting - Section 10B - Frequency-Modulation Sound Broadcasting in Bands 8 (VHF) and 9 (UHF)
ITU-R BS.559-2-1990 Objective Measurement of Radio-Frequency Protection Ratios in LF MF and HF Broadcasting - Section 10A-1 - Amplitude-Modulation Sound Broadcasting in Bands 5 (LF) 6 (MF) and 7 (HF)
ITU-R BS.559-2 FRENCH-1990 OBJECTIVE MEASUREMENT OF RADIO-FREQUENCY PROTECTION RATIOS IN LF, MF AND HF BROADCASTING
ITU-R BS.559-2 SPANISH-1990 OBJECTIVE MEASUREMENT OF RADIO-FREQUENCY PROTECTION RATIOS IN LF, MF AND HF BROADCASTING
ITU-R F.612-1986 Measurement of Reciprocal Mixing in HF Communication Receivers in the Fixed Service - Section 3Aa - Technical Characteristics
ITU-R F.612 FRENCH-1986 Measurement of Reciprocal Mixing in HF Communication Receivers in the Fixed Service - Section 3Aa - Technical Characteristics
ITU-R F.612 SPANISH-1986 MEASUREMENT OF RECIPROCAL MIXING IN HF COMMUNICATION RECEIVERS IN THE FIXED SERVICE

Professional Standard - Machinery, Analysis test part high frequency

JB/T 11939-2014 The technical conditions and test evaluation method for crude oil water analytical instrument by RF
JB/T 8990-1999 Model test analyses and natural frequency measurement methods of large turbo - generators on stator end windings and evaluation criteria

AENOR, Analysis test part high frequency

UNE 80113:2013 Test methods of cements. Physical analysis. Determination of the autoclave expansion
UNE-EN 60060-2:2012 High-voltage test techniques -- Part 2: Measuring systems.
UNE-EN 61180-2:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 2: TEST EQUIPMENT.
UNE-EN 60060-1:2012 High-voltage test techniques - Part 1: General definitions and test requirements
UNE-EN 455-1:2001 MEDICAL GLOVES FOR SINGLE USE. PART 1: REQUIREMENTS AND TESTING FOR FREEDOM FROM HOLES.
UNE-EN 12350-11:2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test

CZ-CSN, Analysis test part high frequency

CSN 58 0170 Cast.8-1981 Method of test for mayonnaise. Part 08. Microbiological analysis
CSN ISO 6507-1:1993 Metallic materials. Hardness test, Vickers test. Part 1: HV 5 to HV 100
CSN ISO 6507-2:1993 Metallic materials. Hardness test. Vickers test. Part 2: HV 0,2 to less than HV 5

RO-ASRO, Analysis test part high frequency

STAS SR EN 196-2-1995 Methods of testing cement - Part 2: Chemical analysis of cement

AT-ON, Analysis test part high frequency

OENORM EN ISO 15792-2:2021 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)

Occupational Health Standard of the People's Republic of China, Analysis test part high frequency

GBZ/T 189.1-2007 Measurement of Physical Agents in Workplace Part 1:Ultra High Frequency Radiation
GBZ/T 189.2-2007 Measurement of Physical Agents in Workplace Part 2: High Frequency Electromagnetic Field

RU-GOST R, Analysis test part high frequency

GOST ISO 1833-1-2011 Textiles. Quantitative chemical analysis. Part 1. General principles of testing
GOST R ISO 1833-1-2008 Textiles. Quantitative chemical analysis. Part 1. General principles of testing

Indonesia Standards, Analysis test part high frequency

SNI IEC 60060-2:2011 High voltage test techniques - Part 2: Measuring systems
SNI ISO 1833-1:2011 Textiles - Quantitative chemical analysis - Part 1: General principles of testing

AT-OVE/ON, Analysis test part high frequency

OVE EN IEC 62984-2:2021 High-temperature secondary batteries - Part 2: Safety requirements and tests ((IEC 62984-2:2020) EN IEC 62984-2:2020) (german version)

Society of Automotive Engineers (SAE), Analysis test part high frequency

SAE J2052-1997 Test Device Head Contact Duration Analysis

American National Standards Institute （ANSI), Analysis test part high frequency

ANSI/TIA/EIA 455-206-2000 FOTP206 - IEC 61290-1-1 - Optical Fiber Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer
ANSI/INCITS/ISO/IEC 14496-4/AMD 8:2009 Information technology - Coding of audio-visual objects - Part 4: Conformance testing for MPEG-4 - Amendment 8: High Efficiency Advanced Audio Coding, audio BIFS, and structured audio conformance
ANSI/TIA/EIA 455-210-2000 FOTP210-IEC 61290-2-2 - Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer
ANSI/TIA/EIA 455-209-2000 FOTP209 - IEC 61290-2-1 - Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer
ANSI/TIA/EIA 455-207-2000 FOTP207 - IEC 61290-1-2- Optical Fiber Amplifiers - Basic Specification Part 1-2: Test Methods for Gain Parameters - Electrical Spectrum Analyzer
ANSI/TIA-455-207-2000 FOTP207 - IEC 61290-1-2- Optical Fiber Amplifiers - Basic Specification Part 1-2: Test Methods for Gain Parameters - Electrical Spectrum Analyzer
ANSI/TIA-455-210-2000 FOTP210-IEC 61290-2-2 - Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Analysis test part high frequency

GJB 5381.8-2005 Methods of chemical analysis for pyrotech. Part 8: Determination of Hexamethylene tetramine content. Acid-base titration

Professional Standard - Medicine, Analysis test part high frequency

YY/T 0456.4-2014 Reagents for hematology analyzer.Part 4:Nucleated red blood cell enumeration reagents
YY/T 0456.5-2014 Reagents for hematology analyzer.Part 5:Reticulocyte enumeration reagents

American Welding Society (AWS), Analysis test part high frequency

WRC 229:1977 Part 1: Dynamic Fracture-Resistance Testing and Methods For Structural Analysis

PT-IPQ, Analysis test part high frequency

NP EN ISO 9167-1:2002 Rapeseed Determination of glucosinolates content Part 1:Method using high-performance liquid chromatography(ISO 9167-1:1992)
NP EN 1744-1-2000 Tests for chemical properties of aggregates Part 1:Chemical analysis

Professional Standard-Ships, Analysis test part high frequency

CB/T 4390.1-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part1:Determination of iron content
CB/T 4390.2-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part2:Determination of aluminium content
CB/T 4390.3-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part3:Determination of manganese content
CB/T 4390.4-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part4:Determination of nickel content
CB/T 4390.5-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part5:Determination of silicon content
CB/T 4390.6-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part6:Determination of lead content
CB/T 4390.7-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part7:Determination of carbon content
CB/T 4390.8-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part8:Determination of zinc content

CEN - European Committee for Standardization, Analysis test part high frequency

EN 12441-8:2004 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
EN ISO 12156-1:2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
PREN 455-1-2019 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes

SG-SPRING SG, Analysis test part high frequency

SS 78 Pt.A24-1991 TESTING CONCRETE Part A24 : Methods For Analysis Of Hardened Concrete

Malaysia Standards, Analysis test part high frequency

MS 544 Pt.7-2001 Code of practice for structural use of timber:Part 7:Testing(First revision)
MS 954 Pt.2-2000 Methods of test for meat and meat products: Part 2: determination of total ash (first revision)

VN-TCVN, Analysis test part high frequency

TCVN 6099-2-2007 High-voltage test techniques.Part 2: Measuring systems

ANSI - American National Standards Institute, Analysis test part high frequency

INCITS/ISO/IEC 13818-4 AMD 1:1999 Information technology - Generic coding of moving pictures and associated audio information - Part 4: Conformance testing AMENDMENT 1: Advanced Audio Coding (AAC) conformance testing
INCITS/ISO/IEC 13818-4 AMD 2:1999 Information technology - Generic coding of moving pictures and associated audio information - Part 4: Conformance testing AMENDMENT 1: Advanced Audio Coding (AAC) conformance testing

(U.S.) Telecommunications Industries Association , Analysis test part high frequency

TIA/EIA-455-210-2000 FOTP-210 IEC 61290-2-2 Optical Fibre Amplifiers - Basic Specification Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer

Professional Standard - Commodity Inspection, Analysis test part high frequency

SN/T 3322.1-2012 Chemical analysis of limenite concentrate for import and export.Part 1:Determination of major and minor components.Wavelength dispersive X-ray fluorescence spectrometry

Professional Standard - Geology, Analysis test part high frequency

DZ/T 0064.69-2021 Methods of Analysis of Groundwater Quality Part 69: Determination of Oxygen Consumption Alkaline Potassium Permanganate Titration
DZ/T 0130.3-2006 Geology and Mineral Resources Laboratory Testing Quality Management Specification Part 3: Chemical Analysis and Composition Analysis of Rock and Mineral Samples

CH-SNV, Analysis test part high frequency

SN EN 455-1-2020 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes

Professional Standard - Radio Television Film, Analysis test part high frequency

GY/T 257.2-2014 Advanced audio and video codecs for broadcasting and television Part II: Video compliance testing