ZH
RU
ES

general flow of air

general flow of air, Total:498 items.

In the international standard classification, general flow of air involves: Air quality, Quantities and units, Vocabularies, Installations in buildings, Measurement of fluid flow, Compressors and pneumatic machines, Valves, Natural gas, Aerospace fluid systems and components, Equipment for petroleum and natural gas industries, Semiconductor devices, Test conditions and procedures in general, Coals, Power transmission and distribution networks, Products of the chemical industry, Aircraft and space vehicles in general, Fluid power systems, Applications of information technology, Measurement of force, weight and pressure, On-board equipment and instruments, Protective equipment, Radiation protection, Metrology and measurement in general, Water quality, Plastics, Pumps, Vacuum technology, Acoustics and acoustic measurements, Domestic electrical appliances in general, Burners. Boilers, Environmental protection, Explosion protection, Internal combustion engines, Resistors, Transformers. Reactors, Electronic tubes, Physics. Chemistry, Components for electrical equipment, Characteristics and design of machines, apparatus, equipment, Electrical accessories, Capacitors, Analytical chemistry, Ventilators. Fans. Air-conditioners, Domestic, commercial and industrial heating appliances, Radiation measurements, Alarm and warning systems, Thermodynamics and temperature measurements, Railway rolling stock, Surface treatment and coating, Radiocommunications, Fluid storage devices, Construction of airports, Automatic controls for household use, Electricity. Magnetism. Electrical and magnetic measurements, Electronic components in general, Welding, brazing and soldering, Road vehicle systems, Rectifiers. Convertors. Stabilized power supply, Audio, video and audiovisual engineering.


Defense Logistics Agency, general flow of air

RO-ASRO, general flow of air

  • STAS 10331-1989 Air quality G ENERAL RULES OF SAMPLING
  • SR ISO 4226:1994 Air quality General aspects. Measurement units
  • STAS 8273/0-1979 BALLASTS FOR GAZ DISCHARGE LAMPS General technical requirements for quality
  • STAS 12756-1989 DIRECT CURRENT ELECTRICALENGINES FOR AIRCRAFT General technical requirements for quality
  • STAS 9861-1974 Rubber hoses AIR HOSES FOR GENERAL PURPOSES
  • STAS 11396-1980 D. C. BRIDGES FOR MEASURING RESISTANCE General technical requirements for quality
  • STAS 10200-1975 ALTERNATING CURRENT GENERATORS FOR MOTOR VEHICLES Generals technical requirements for quality
  • STAS 8842-1979 Automation means and devices AIR FOR SUPPLYING PNEUMATIC AUTOMATION MEANS General technical requirements for quality
  • STAS 1564/1-1985 ALTERNATING CURRENT DISCONNECTORS FOR VOLTAGES ABOVE 1 KV General technical requirements for quality
  • STAS 12716-1989 EQUIPMENT FOR CONTINUO- USLY MONITORING RADIO- ACTIVITY IN GASEOUS ' EFFLUENTS General requirements
  • STAS 11031-1991 Pneumostatic drives main parameters measurement general methods
  • STAS 8533-1985 FLUID POWER SYSTEMS COMPONENTS OF FLUID POWER SYSTEM General technical requirements for quality
  • STAS 7938-1976 AIR-DIELECTRIC VARIABLE CAPA CITORS FOR RADIO RECEIVERS Technical general requirements for quality
  • STAS 8754/1-1970 Air conditioning and ventilating installations CELLULAR AIR FILTERS General requirements for metal frame
  • STAS 6391/1-1986 BUSHINGS FOR ALTERNAT1NG VOLTA GES ABOVE 1 kV General technical requirements for quality
  • STAS 6387-1986 AIR TUBES FOR RUBBER TYRES General technical requirements for qua-
  • STAS 11099-1990 Electrical equipment for motor vehicles. Starters. General technical require ments for quality
  • STAS 6391/2-1986 BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1 kV General technical requirements for quality
  • STAS 12011/2-1989 DRIED SAFETY DEVICES FOR FUEL GASES, OXYGEN AND COMPRESSED AIR FOR WELDING AND CUTTING EQUIPMENT AND RELATED PROCESSES General technical requirements tor quality
  • STAS SR ISO 3724:1993 Hdrauilc fiuid power. Filter elernents . Verification of flow fatigue charcteristics.
  • STAS 3686/1-1974 CIRCUIT—BREAKEBS FOR ALTERNATING VOLTAGES ABOVE 1 kV General technical requirements for quality
  • STAS 10270/1-1985 ELECTRICAL INCANDESCENT LAMPS FOR RAIL VEHICLES General technical requirements tor quality
  • STAS 11267-1979 Artificial leather POROMERIC LINING LEA- THER General technical requirements for ojaality
  • STAS 11299-1980 ELECTRONIC APPARATUS FOR HOUSEHOLD AND SIMILAR USE General technical requirements for quality
  • STAS 12553/11-1987 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT General specification for test and measuring methods
  • STAS 12619/11-1988 FJXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENTS General specification lor test and measuring methods

VN-TCVN, general flow of air

  • TCVN 5966-2009 Air quality.General aspects.Vocabulary
  • TCVN 5967-1995 Air quality.General aspects.Units of measurement
  • TCVN 5591-1991 Surface water.General rules for measuring flow rate
  • TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods
  • TCVN 5972-1995 Ambient air.Determination of the mass concentration of carbon monoxide.Gas chromatographic method

Korean Agency for Technology and Standards (KATS), general flow of air

  • KS I ISO 4219:2012 Air quality－Determination of gaseous sulphur compounds in ambient air－Sampling equipment
  • KS I ISO 4225:2020 Air quality — General aspects — Vocabulary
  • KS I ISO 4225:2014 Air quality — General aspects — Vocabulary
  • KS I ISO 4219:2017 Air quality－Determination of gaseous sulphur compounds in ambient air－Sampling equipment
  • KS I ISO 4225:2012
  • KS I 2002-2005(2010) Air quality－General aspects(Units of measurement)
  • KS I ISO 4226-2014(2019) Air quality — General aspects — Units of measurement
  • KS B ISO 16890-2:2021 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
  • KS B ISO 4053-1:2001 Measurement of gas flow in conduits-Tracer method-Part 1:General
  • KS B ISO 4053-1:2015 Measurement of gas flow in conduits－Tracer method－Part 1：General
  • KS B ISO 4414-2006(2011) Pneumatic fluid power－General rules relating to systems
  • KS I ISO 11771:2013 Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
  • KS I ISO 20581:2020 Workplace air ― General requirements for the performance of procedures for the measurement of chemical agents
  • KS I ISO 7168-1:2007 Air quality－Exchange of data－Part 1：General data format
  • KS I ISO 7168-1:2022 Air quality — Exchange of data — Part 1: General data format
  • KS I ISO 7168-1:2017 Air quality－Exchange of data－Part 1：General data format
  • KS I ISO 16000-1-2014(2019) Indoor air — Part 1: General aspects of sampling strategy
  • KS C IEC 63086-1:2021 Household and similar electrical air cleaning appliances —methods for measuring the performance —Part 1: General requirements
  • KS B ISO 5167-1:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 1:General principles and requirements
  • KS B ISO 5167-1:2014 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
  • KS M 0034-2013(2018) General rules for methods of potentiometric, amperometric, coulometric and Karl-Fisher titrations
  • KS I ISO TS 14167:2015 Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines
  • KS I ISO 8186:2006 Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
  • KS I ISO 8186-2006(2016) Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
  • KS I ISO 8186:2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
  • KS C IEC 60730-2-15:2020 Automatic electrical controls —Part 2-15: Particular requirements for automatic electrical air flow,water flow and water level sensing controls
  • KS C IEC 61557-1-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 1：General requirements
  • KS I ISO 14167:2010 Gas analysis-General quality assurance aspects in the use of calibration gas mixtures-Guidelines
  • KS I ISO TS 14167-2015(2020) Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines

Danish Standards Foundation, general flow of air

  • DS/ISO 4225:1998 Air quality - General aspects - Vocabulary
  • DS/ISO 4225:1983 Air quality. General aspects. Vocabulary
  • DS/EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
  • DS/EN ISO 11771:2011 Air quality – Determination of time-averaged mass emissions and emission factors – General approach
  • DS/ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry
  • DS/EN ISO 16000-1:2006 Indoor air - Part 1: General aspects of sampling strategy
  • DS/EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
  • DS/EN ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
  • DS/EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components
  • DS/EN ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas-phase air cleaning devices
  • DS/EN 60761-1:2005 Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements

Lithuanian Standards Office , general flow of air

  • LST ISO 4225:2000 Air quality. General aspects. Vocabulary
  • LST ISO 4226:2008 Air quality - General aspects - Units of measurement (ISO 4226:2007, identical)
  • LST EN 15267-1-2009 Air quality - Certification of automated measuring systems - Part 1: General principles
  • LST EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
  • LST EN 779-2012 Particulate air filters for general ventilation - Determination of the filtration performance
  • LST EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
  • LST EN ISO 16000-1:2006 Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004)
  • LST EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)

AENOR, general flow of air

  • UNE 77204:1998 AIR QUALITY. GENERAL ASPECTS. VOCABULARY.
  • UNE-ISO 4226:2010 Air quality. General aspects. Units of measurement.
  • UNE-EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
  • UNE-EN 246:2004 Sanitary tapware. General specifications for flow rate regulators.
  • UNE-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
  • UNE 100705:1991 AIR CONDITIONING. MEASURE OF THE VOLUME FLOW AIR IN GRILLES OR DIFFUSERS. METHOD OF THE PRESSURE COMPENSATION.
  • UNE-EN ISO 16000-1:2006 Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004)
  • UNE-EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
  • UNE-EN ISO 10121-1:2015 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media (ISO 10121-1:2014)

Association Francaise de Normalisation, general flow of air

  • NF X43-111*NF ISO 4225:2020 Air quality - General aspects - Vocabulary
  • NF ISO 4225:2020 Qualité de l'air - Aspects généraux - Vocabulaire
  • NF X15-111:1993 Measurement of air moisture. General information on measuring instruments. Selection guide.
  • NF X43-700-1*NF EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1 : general principles
  • NF EN ISO 11771:2011 Qualité de l'air - Détermination de la moyenne temporelle des émissions massiques et des facteurs d'émission - Approche générale
  • NF ISO 8278:1987 Aéronautique et espace - Pompes hydrauliques à débit variable régulé en fonction de la pression - Exigences générales
  • NF X43-312*NF EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
  • NF X44-062-3*NF EN ISO 16890-3:2017 Air filters for general ventilation - Part 3 : determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
  • NF X43-507-1*NF ISO 7168-1:2000 Air quality - Exchange of data - Part 1 : general data format
  • FD X15-111:2004 Mesure de l'humidité de l'air - Généralités sur les instruments de mesure - Guide de choix et d'utilisation
  • NF T51-211-2*NF EN ISO 3219-2:2021 Rheology - Part 2 : general principles of rotational and oscillatory rheometry
  • NF X10-515:1971 Vacuum technology. Vapour vacuum pumps. Measurement of the volume rate of flow (pumping speed).
  • NF E51-770*NF EN 16211:2015 Ventilation for buildings - Measurement of air flows on site - Methods
  • NF S31-090:1995 TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE EMITED BY HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 60 704-1).
  • NF EN ISO 5167-1:2022 Mesurage de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire - Partie 1 : Principes généraux et exigences générales
  • NF E49-160-1*NF ISO 6358-1:2013 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1: general rules and test methods for steady-state flow
  • NF X43-404-1*NF EN ISO 16000-1:2006 Indoor air - Part 1 : general aspects of sampling strategy.
  • NF EN ISO 16000-1:2006 Air intérieur - Partie 1 : aspects généraux de la stratégie d'échantillonnage
  • NF EN 13098:2019 Exposition sur les lieux de travail - Mesurage des micro-organismes et des composés microbiens en suspension dans l'air - Exigences générales
  • NF X43-247*NF EN 13098:2019 Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements
  • NF C11-241-1:2002 Overhead electrical lines exceeding AC 45 kV - Part 1 : general requirements - Common specifications.
  • NF C11-241-1*NF EN 50341-1:2015 Overhead electrical lines exceeding AC 1 kV - Part 1 : general requirements - Common specifications
  • NF X44-012:2012 Particulate air filters for general ventilation - Determination of the filtration performance.
  • NF X20-106*NF ISO 14167:2019 Gas analysis - General quality aspects and metrological traceability of calibration gas mixtures
  • FD M60-821:2010 Nuclear energy - General considerations about the sampling and the measurements of radioactive effluents
  • XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
  • NF X43-289*NF EN 14530:2004 Workplaces atmospheres - Determination of diesel particulate matter - General requirements
  • NF E31-202:1974 AIR HEATING UNITS-CHARACTERISTICS-GENERAL METHOD OF TEST USING A TEST BED.
  • NF EN 15805:2021 Filtres à air de ventilation générale pour l'élimination des particules - Dimensions normalisées
  • NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
  • NF E51-725*NF EN 12589:2002 Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units
  • NF E49-160-1/A1*NF ISO 6358-1/A1:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
  • NF ISO 14167:2019 Analyse des gaz - Aspects généraux sur la qualité et traçabilité métrologique des mélanges de gaz pour étalonnage
  • NF X43-060-1*NF EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements
  • NF EN 16211:2015 Systèmes de ventilation pour les bâtiments - Mesurages de débit d'air dans les systèmes de ventilation - Méthodes
  • NF EN 14530:2004 Air des lieux de travail - Dosage des matières particulaires émises par les moteurs diesel - Exigences générales
  • NF X10-102-1*NF EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1 : general principles and requirements
  • NF X44-016-2*NF EN ISO 10121-2:2013 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: gas-phase air cleaning devices (GPACD)
  • NF E31-201:1971 General method for test bed testing of air heaters and circulators.
  • NF X44-061:1992 Cleaning equipment - Method of testing air filters used in general ventilation - Quick method
  • NF C11-241-1/A1:2009 Overhead electrical lines exceeding AC 45 kV - Part 1 : general requirements - Common specifications.
  • NF C42-198-1*NF EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1 : general requirements
  • NF C73-086-1*NF EN IEC 63086-1:2020 Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1 : general requirements
  • NF C11-223-1:2005 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 1 : general requirements - Common specifications.
  • NF EN IEC 60730-2-15:2019 Dispositifs de commande électrique automatiques - Partie 2-15 : exigences particulières pour les dispositifs de commande électrique automatiques détecteurs de débit d'air, de débit d'eau et de niveau d'eau
  • XP X43-047-2*XP CEN/TS 16115-2:2017 Ambient air - Measurement of bioaerosols - Part 2 : planning and evaluation of plant-related plume measurements
  • NF ISO 6358-1:2013 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 1 : règles générales et méthodes d'essai en régime stationnaire

KR-KS, general flow of air

  • KS I ISO 4225-2020 Air quality — General aspects — Vocabulary
  • KS B ISO 16890-2-2021 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
  • KS B ISO 16890-3-2023 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
  • KS I ISO 20581-2020 Workplace air ― General requirements for the performance of procedures for the measurement of chemical agents
  • KS I ISO 7168-1-2022 Air quality — Exchange of data — Part 1: General data format
  • KS C IEC 63086-1-2021 Household and similar electrical air cleaning appliances —methods for measuring the performance —Part 1: General requirements
  • KS I ISO 8186-2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
  • KS C IEC 60730-2-15-2020 Automatic electrical controls —Part 2-15: Particular requirements for automatic electrical air flow,water flow and water level sensing controls

German Institute for Standardization, general flow of air

  • DIN ISO 4225:1996 Air quality - General aspects - Vocabulary (ISO 4225:1994)
  • DIN ISO 4225:2020-10 Air quality - General aspects - Vocabulary (ISO 4225:2020)
  • DIN ISO 4226:2009 Air quality - General aspects - Units of measurement (ISO 4226:2007);English version of DIN ISO 4226:2009-02
  • DIN ISO 4226:2009-02 Air quality - General aspects - Units of measurement (ISO 4226:2007)
  • DIN EN ISO 16890-2:2020-09 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO/DIS 16890-2:2020); German and English version prEN ISO 16890-2:2020 / Note: Date of issue 2020-07-31*Intended as replacement for DIN EN ISO ...
  • DIN EN 15267-1:2021-12 Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification; German and English version prEN 15267-1:2021 / Note: Date of issue 2021-10-29*Intended as replacement for DIN EN 15267-1 (2009-07).
  • DIN EN ISO 16890-2:2020 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO/DIS 16890-2:2020); German and English version prEN ISO 16890-2:2020
  • DIN ISO 4225:2020 Air quality - General aspects - Vocabulary (ISO 4225:2020)
  • DIN EN ISO 16890-2:2017 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)
  • DIN EN ISO 16890-2:2017-08 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016); German version EN ISO 16890-2:2016 / Note: To be replaced by DIN EN ISO 16890-2 (2020-09).
  • DIN 9020-1:1983 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey
  • DIN EN ISO 16890-3:2017-08 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016); German version EN ISO 16890-3:2016
  • DIN EN ISO 16890-3:2017 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)
  • DIN EN 15267-1:2009-07 Air quality - Certification of automated measuring systems - Part 1: General principles; German version EN 15267-1:2009 / Note: To be replaced by DIN EN 15267-1 (2021-12).
  • DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
  • DIN ISO 7168-1:1999 Air quality - Exchange of data - Part 1: General data format (ISO 7168-1:1999)
  • DIN 19559-1:1983 Measurement of flow of waste water in open channels and gravity conduits; general information
  • DIN 19559-1:1983-07 Measurement of flow of waste water in open channels and gravity conduits; general information
  • DIN EN 16211:2015 Ventilation for buildings - Measurement of air flows on site - Methods
  • DIN EN ISO 16000-1:2006 Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004); English version EN ISO 16000-1:2006-06
  • DIN EN ISO 16000-1:2006-06 Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004); German version EN ISO 16000-1:2006
  • DIN EN 13098:2019-12 Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements; German version EN 13098:2019
  • DIN EN 13098:2019 Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements
  • DIN EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles; English version of DIN EN 15267-1:2009-07
  • DIN EN 16211:2023-05 Ventilation for buildings - Measurement of air flow rates on site - Methods; German and English version prEN 16211:2023 / Note: Date of issue 2023-04-07*Intended as replacement for DIN EN 16211 (2015-09).
  • DIN EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
  • DIN EN ISO 4414:2011-04 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010); German version EN ISO 4414:2010 / Note: DIN EN 983 (2009-06) remains valid alongside this standard until 2011-11-01.
  • DIN ISO 23138:2023-06 Biological equipment for treating air and other gases - General requirements (ISO/DIS 23138:2023); Text in German and English / Note: Date of issue 2023-05-19
  • DIN EN 15267-1:2023-09 Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification; German version EN 15267-1:2023 / Note: Applies in conjunction with DIN EN ISO/IEC 17065 (2013-01).
  • DIN 6130:1980 Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume
  • DIN 6130:1980-12 Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume
  • DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
  • DIN EN ISO 10121-2:2013-08 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas-phase air cleaning devices (GPACD) (ISO 10121-2:2013); German version EN ISO 10121-2:2013
  • DIN EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
  • DIN EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:1999
  • DIN ISO 20480-1:2022-09 Fine bubble technology - General principles for usage and measurement of fine bubbles - Part 1: Terminology (ISO 20480-1:2017)
  • DIN CEN/TS 16115-2:2017-03*DIN SPEC 33975:2017-03 Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of plant-related plume measurements; German version CEN/TS 16115-2:2016

International Organization for Standardization (ISO), general flow of air

  • ISO 4225:2020 Air quality — General aspects — Vocabulary
  • ISO 4226:2007 Air quality - General aspects - Units of measurement
  • ISO 4226:1993 Air quality; general aspects; units of measurement
  • ISO 16890-2:2022 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
  • ISO 4226:1980 Air quality; General aspects; Units of measurement
  • ISO 9206:1990 Aerospace; constant displacement hydraulic motors; general specifications
  • ISO/DIS 16890-3:2023 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
  • ISO 9206:2016 Aerospace series - Constant displacement hydraulic motors - General specifications
  • ISO 4225:1980 Air quality; General aspects; Vocabulary Bilingual edition
  • ISO 4225:1994 Air quality; general aspects; vocabulary
  • ISO/CD 16890-3 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
  • ISO 8278:1986 Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements
  • ISO 18170:2017 Aerospace series - AC induction electric motor driven, variable delivery, hydraulic pumps - General requirements
  • ISO 4225 DAM 1:1991 Air quality; general aspects; vocabulary; amendment 1: additional terms
  • ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
  • ISO 12334:2000 Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems
  • ISO 7168-1:1999 Air quality - Exchange of data - Part 1: General data format
  • ISO 8278:2016 Aerospace series - Hydraulic, pressure compensated, variable delivery pumps - General requirements
  • ISO 8363:1986 Liquid flow measurement in open channels; General guidelines for the selection of methods
  • ISO/TR 8363:1997 Measurement of liquid flow in open channels — General guidelines for selection of method
  • ISO 8573-1:1991 Compressed air for general use; part 1: contaminants and quality classes
  • ISO/DIS 23138:2023 Biological equipment for treating air and other gases — General requirements
  • ISO 22181:2021 Aerospace fluid systems and components - Variable displacement hydraulic motors - General specifications
  • ISO 8573-2:1996 Compressed air for general use - Part 2: Test methods for aerosol oil content
  • ISO 21360:2007 Vacuum technology - Standard methods for measuring vacuum-pump performance - General description
  • ISO 5220:1981/Add 1:1984 Air distribution and air diffusion — Aerodynamic testing and rating of constant and variable dual or single duct boxes and single duct units — Addendum 1: Variable primary flow rate control devices wi
  • ISO 14167:2018 Gas analysis — General quality aspects and metrological traceability of calibration gas mixtures
  • ISO 21360-1:2012 Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description
  • ISO 21360-1:2020 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General description
  • ISO 8186:1989 Ambient air; determination of the mass concentration of carbon monoxide; gas chromatographic method
  • ISO 5167-1:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
  • ISO/TS 14167:2003 Gas analysis - General quality assurance aspects in the use of calibration gas mixtures - Guidelines
  • ISO 14114:1999 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements
  • ISO 14114:2017 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements
  • ISO 14114:2014 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements
  • ISO 1608-1:1993 Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)

British Standards Institution (BSI), general flow of air

  • BS ISO 4225:2020 Air quality. General aspects. Vocabulary
  • BS ISO 4226:2007 Air quality. General aspects. Units of measurement
  • BS EN 15267-1:2023 Air quality. Assessment of air quality monitoring equipment. General principles of certification
  • BS 5857-2.1:1980 Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow. General
  • BS EN ISO 16890-2:2022 Tracked Changes. Air filters for general ventilation. Measurement of fractional efficiency and air flow resistance
  • 19/30393461 DC BS ISO 4225. Air quality. General aspects. Vocabulary
  • BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV. General requirements. Common specifications
  • BS ISO 9206:2016 Aerospace series. Constant displacement hydraulic motors. General specifications
  • 20/30404433 DC BS EN ISO 16890-2. Air filters for general ventilation. Part 2. Measurement of fractional efficiency and air flow resistance
  • 21/30441601 DC BS EN 15267-1. Air quality. Assessment of air quality monitoring equipment - Part 1. General principles of certification
  • BS 6069-5.1:1994 Characterization of air quality. General.. Handling of temperature, pressure and humidity data
  • BS 3680-2A:1995 Measurement of liquid flow in open channels. Dilution methods. General
  • BS ISO 16000-1:2005 Indoor air - General aspects of sampling strategy
  • BS EN ISO 16000-1:2005 Indoor air - General aspects of sampling strategy
  • BS EN ISO 16000-1:2006 Indoor air. General aspects of sampling strategy
  • BS EN IEC 63086-1:2020 Household and similar electrical air cleaning appliances. Methods for measuring the performance. General requirements
  • BS EN ISO 11771:2011 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
  • BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
  • BS ISO TR 8363:1998 Measurement of liquid flow in open channels - General guidelines for the selection of method
  • BS EN 482:2006 Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents
  • BS EN 482:2012 Workplace exposure. General requirements for the performance of procedures for the measurement of chemical agents
  • BS ISO 20581:2016 Workplace air. General requirements for the performance of procedures for the measurement of chemical agents
  • BS ISO 8278:2016 Aerospace series. Hydraulic, pressure compensated, variable delivery pumps. General requirements
  • BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
  • BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
  • BS EN IEC 63086-1:2020+A1:2023 Household and similar electrical air cleaning appliances. Methods for measuring the performance - General requirements
  • BS ISO 8625-2:2018 Aerospace. Fluid systems. Vocabulary - General terms and definitions relating to flow
  • BS ISO 22181:2021 Aerospace fluid systems and components. Variable displacement hydraulic motors. General specifications
  • BS ISO 21018-1:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - General principles
  • 20/30391051 DC BS EN ISO 22181. Aerospace fluid systems and components. Variable displacement hydraulic motors. General specifications
  • BS EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements
  • 19/30378151 DC BS ISO 6358-1 AMD1. Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Part 1. General rules and test methods for steady-state flow
  • BS EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces
  • BS EN 14530:2004(2009) Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • BS EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • BS EN 15805:2021 Particulate air filters for general ventilation. Standardised dimensions
  • 23/30429396 DC BS ISO 23138. Biological equipment for treating air and other gases. General requirements
  • BS ISO 20480-1:2017 Fine bubble technology. General principles for usage and measurement of fine bubbles. Terminology
  • BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
  • BS ISO 12333:2000 Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems
  • BS ISO 8625-3:2018 Aerospace. Fluid systems. Vocabulary. General terms and definitions relating to temperature
  • BS ISO 14167:2018 Gas analysis. General quality aspects and metrological traceability of calibration gas mixtures
  • 22/30449535 DC BS EN 63086-1 AMD1. Household and similar electrical air cleaning appliances. Methods for measuring the performance. Part 1. General requirements
  • BS EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - General requirements and test methods
  • BS EN 50423-1:2005 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 1: General requirements - Common specifications
  • BS DD ISO/TS 21220:2009 Particulate air filters for general ventilation - Determination of filtration performance
  • 23/30466266 DC BS ISO 18170. Aerospace series. AC induction electric motor driven, variable delivery, hydraulic pumps. General requirements
  • BS EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen — Part 1: Pressure vessels for general purposes
  • BS ISO 20480-3:2021 Fine bubble technology. General principles for usage and measurement of fine bubbles. Methods for generating fine bubbles
  • DD ENV 50230-1997 Aeronautical ground lighting electrical installation. Control and monitoring systems. General requirements
  • 20/30408412 DC BS EN 15805. Particulate air filters for general ventilation. Standardised dimensions
  • BS EN 61557-1:1997 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - General requirements
  • BS ISO 20480-2:2018 Fine bubble technology. General principles for usage and measurement of fine bubbles - Categorization of the attributes of fine bubbles
  • BS EN ISO 10121-3:2022 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Classification system for GPACDs applied to treatment of outdoor air
  • BS EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - General requirements
  • BS EN ISO 16890-3:2016 Air filters for general ventilation. Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured

RU-GOST R, general flow of air

  • GOST R ISO 4226-2012 Air quality. General aspects. Units of measurement
  • GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
  • GOST R 52539-2006 Air cleanliness in hospitals. General requirements
  • GOST R 59670-2021 Workplace air. General requirements for the performance of procedures for the measurement of chemical agents
  • GOST 12.1.005-1988 Occupational safety standards system. General sanitary requirements for working zone air
  • GOST R 51625-2000 Industrial gas-using equipment. Air heaters with air-flue gases mixing. General technical requirements
  • GOST R 8.886-2015 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the velocity of air flow
  • GOST R EN 13528-1-2010 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Part 1. General requirements
  • GOST R 50670-1994 Industrial gas-using equipment. Air heaters. General technical requirements
  • GOST 19824-1974 Filter air purification means for collective protection objects. Method of measuring the constant air flow resistance
  • GOST 21342.0-1975 Resistors. General requirements at measuring of electrical parameters
  • GOST 21011.0-1975 High-voltage kenotrons. Methods measurements of electric parameters. General requirements
  • GOST R EN 779-2014 Particulate air filters for general ventilation. Determination of the filtration performance
  • GOST 1516.2-1987 Electrical equipment and installations for a. c. voltages 3 kV and higher. General methods of dielectric tests
  • GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
  • GOST R 54578-2011 Workplace air quality. Predominantly fibrogenic aerosols. General principles for hygienic regulation, monitoring and evaluation
  • GOST R 54578-2011(2019) Workplace air quality. Predominantly fibrogenic aerosols. General principles for hygienic regulation, monitoring and evaluation
  • GOST R 52725-2007 Surge arresters for a.c. electrical installations for voltage from 3 kV to 750kV. General specifications
  • GOST 22988.0-1978 Gas caunters. Methods of characteristic measurement. General principles
  • GOST R 8.668-2009 State system for ensuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements for methods for measurement
  • GOST R 8.618-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas
  • GOST 28302-1989 Thermal sprayed protective coatings from zinc and aluminium metallic costruction. General requirements for a typical technological process
  • GOST R 8.846-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Air ionizers and air ion generators. Methods of measuring their parameters
  • GOST R 53635-2009 Gas-fired air heaters with forced convection for firing (heating) rooms not exceeding a net heat input of 100 kW. General technical requirements and test methods
  • GOST 8.586.5-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
  • GOST R 8.577-2000 State system for assuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements to methods for determination
  • GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
  • GOST 25991-1983 Equipment for manufacturing products of electronic technique. Dust-proof boxes and cabins with laminar air flow. Types. General technical requirements
  • GOST R 51190-1998 Tubings for air brake systems of road vehicles with the use of polyamide tubes. General technical requirements
  • GOST 25293-1982 Coolers of air-cooling system of power semiconducting devices. General specifications

European Committee for Standardization (CEN), general flow of air

  • EN ISO 16890-2:2016 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)
  • EN ISO 16890-2:2022 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2022)
  • EN 15267-1:2023 Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification
  • prEN ISO 16890-3 rev Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
  • EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
  • EN 16211:2015 Ventilation for buildings - Measurement of air flows on site - Methods
  • EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
  • EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements
  • EN ISO 5167-1:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2022)
  • CEN/TS 16115-2:2016 Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of plant-related plume measurements
  • PD CEN/TS 16115-2:2016 Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of plant-related plume measurements

ES-UNE, general flow of air

  • UNE-EN ISO 16890-2:2023 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2022)
  • UNE-EN ISO 16890-3:2017 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)
  • UNE-EN 13098:2022 Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements

SE-SIS, general flow of air

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, general flow of air

  • GB/T 13277-1991 Compressed air for general use--Quality classes
  • GB/T 35065.1-2018 Wet natural gas flow measurement.Part 1: General rules
  • GB/T 13279-2015 Stationary reciprocating air compressors for general use
  • GB/T 13279-2002 Stationary reciprocating piston air compressor for general use
  • GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
  • GB/T 30833-2014 Pneumatic fluid power.Compressible fluids consumed by equipment.Power determination and measurement of compressible air

AT-ON, general flow of air

  • ONORM M 9490 Teil.1-1988 Meteorological measurements for purposes of air pollution control; general Information
  • ONORM ISO 8573-1:1992 Compressed air for general use — Contaminants and quality classes
  • ONORM M 9415 Teil.1-1991 Measuring technique — Measurement ofthe emission of substances into the atmosphere — General requirements
  • ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements
  • OENORM EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

Association of German Mechanical Engineers, general flow of air

  • VDI 4280 Blatt 1-1996 Planning of ambient air quality measurements - General rules
  • VDI 4280 Blatt 1-2014 Planning of ambient air quality measurements - General rules
  • VDI 4300 Blatt 1-1995 Indoor-air pollution measurement - General aspects of measurement strategy
  • VDI/VDE 2640 Blatt 1-1993 Measurement of fluid flow in closed conduits; general guidelines and mathematical basics
  • VDI 4251 Blatt 1-2007 Measurement of airborne microorganisms and viruses in ambient air - Planning of plant-related ambient air measurements - Plume measurement
  • VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
  • VDI 3490 Blatt 2-1980 Measurement of gases; calibration gas mixtures; preparation methods; general
  • VDI 4251 Blatt 1 Berichtigung 2-2016 Measurement of airborne microorganisms and viruses in ambient air - Planning of plant-related ambient air measurements - Plume measurement; Corrigendum 2 concerning standard VDI 4251 Part 1:2007-02

PL-PKN, general flow of air

  • PN Z04227-01-1992 Air purity protection ests for kerosene content eneral
  • PN Z04045-01-1992 Air purity protection Tests for content of aldehydes General
  • PN Z04224-01-1992 Air purity protection Tests for propyl alcohol content General
  • PN Z04225-01-1992 Air purity protection Tests for hydrogen chloride content General
  • PN M40305-1986 Gas appliances or prevailingly use eneral re?uirements
  • PN Z04222-01-1991 Air purity protection. Tests for carbon black content. General
  • PN Z04056-01-1991 Air purity protection Tests for sulfuric acid and sulfur trioxide content General
  • PN Z01001-05-1988 Air purity protection Terms, definitions and units General aspects
  • PN Z04031-01-1992 Air purity protection Tests for content of anilin? and its derivatives General
  • PN-EN ISO 3219-2-2021-10 E Rheology -- Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
  • PN Z04223-01-1992 Air punty protection Tests for halothane (1,1,1-trifluor- -2-brom-2-chloroethane) content General
  • PN Z04043-01-1991 Air purity protection Tests for naphthalene, methylnaphrhalenes and chloro derivatives of naphthalene General re?uirements
  • PN Z04210-01-1989 Air purify protection Tests for />-nitrophenol Introduction and scope of the standard

CZ-CSN, general flow of air

GOSTR, general flow of air

  • GOST R 8.993-2020 State system for ensuring the uniformity of measurements. General requirements for measuring the flow and volume of gas
  • GOST R 58780-2019 Rocket-and-space technology. Quality assurance program. General
  • GOST R 8.995-2020 State system for ensuring the uniformity of measurements. Volume flow rate and quantity of natural gas. Measurements procedure (method) using volumetric diaphragm and fluidics gas meters
  • GOST R 58274-2018 Space systems. Metrological support of technological preparation of production. General
  • GOST R 8.975-2019 State system for ensuring the uniformity of measurements. Permeation tubes for gases and vapors. General specifications
  • PNST 360-2019 State system for ensuring the uniformity of measurements. Measurements of the amount of extracted sub-soil oil and associated petroleum gas. General metrological and technical requirements
  • GOST R 58989-2020 Aviation gas turbine engines. Non-destructive testing of critical parts. General requirements
  • GOST R 8.970-2019 State system for ensuring the uniformity of measurements. Testing gas mixtures generators. General metrological and technical requirements

U.S. Air Force, general flow of air

Professional Standard - Petroleum, general flow of air

  • SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
  • SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., general flow of air

  • ASHRAE KC-03-1-4-2003 Field Evaluation of a New Device to Measure Air Handler Flow
  • ASHRAE SE-99-17-2-1999 Development of PIV Techniques to Measure Airflow Patterns in Ventilated Airspaces
  • ASHRAE SD-95-14-1995 Measured and Predicted Airflow in Large Spaces: Results of IEA Annex 26
  • ASHRAE CI-01-1-2001 Symposium on Air Velocity Measurements in Non-Ideal Flow Conditions
  • ASHRAE HI-02-19-3-2002 CFD Analysis on Rising Stream Around a Human Body and Its Effect on Inhalation Air Quality
  • ASHRAE 3926-1995 Measurement of Two-Phase Refrigerant Liquid-Vapor Mass Flow Rate - Part I: Venturi and Void Fraction Meters

ZA-SANS, general flow of air

  • SANS 5925:2007 Moisture content of coal samples intended for general analysis (air-oven method)
  • SANS 5924:2009 Moisture content of coal samples intended for general analysis (vacuum-oven method)
  • SANS 5924:1978 Moisture content of coal samples intended for general analysis (vacuum-oven method)

未注明发布机构, general flow of air

  • BS EN ISO 16890-3:2016(2017) Air filters for general ventilation Part 3 : Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
  • BS ISO/TR 8363:1997(1999) Measurement of liquid flow in open channels — General guidelines for the selection of method
  • BS EN ISO 16000-1:2006(2010) Indoor air — Part 1 : General aspects of sampling strategy
  • DIN EN 482:1994 Workplace atmosphere – General requirements for procedures for measuring chemical agents

Society of Automotive Engineers (SAE), general flow of air

  • SAE AS5467-2022 General Requirements for Hydraulic Fuse - Flow Rate
  • SAE J1792-1-2007 Self-Propelled Sweepers Air Flow Performance Part 1: Suction Air Volume Performance

SAE - SAE International, general flow of air

  • SAE AS5467-2016 General Requirements for Hydraulic Fuse - Flow Rate
  • SAE AS5466-2012 Aerospace - General Requirements for Hydraulic Fuse - Quantity Measuring

United States Navy, general flow of air

  • NAVY QPL-81581-1 NOTICE 1-2007 HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR
  • NAVY QPL-81581-1-2006 HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR [Superseded: NAVY QPL-81581/1 -13 CANC NOTICE 1, NAVY QPL-81581/1 -12, NAVY QPL-81581/1 -11, NAVY QPL-81581/1 -10, NAVY QPL-81581/1 -9, NAVY QPL-81581/1 -8, NAVY QPL-81581/1 -7,
  • NAVY MIL-DTL-81581 B SUPP 1-2006 HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR
  • NAVY MIL-DTL-81581 B-2006 HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR
  • NAVY MIL-V-85603-1989 VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR

IN-BIS, general flow of air

Standard Association of Australia （SAA）, general flow of air

  • AS 3778.2.4:2007 Measurement of water flow in open channels - General - Estimation of uncertainty of a flow rate measurement
  • AS 1428.1:2001 Design for access and mobility - General requirements for access - New building work
  • AS 1428.1:1998 Design for access and mobility - General requirements for access - New building work
  • AS 1173.2:1986 Recommended methods of measurement on receivers for television broadcast transmissions - Electrical and acoustic measurements at audio-frequencies

Japanese Industrial Standards Committee (JISC), general flow of air

  • JIS B 8392-2:2000 Compressed air for general use -- Part 2: Test methods for aerosol oil content
  • JIS B 8392-2:2011 Compressed air -- Part 2: Test methods for oil aerosol content
  • JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
  • JIS A 1960:2005 Indoor air -- General aspects of sampling strategy
  • JIS A 1960:2015 Indoor air -- General aspects of sampling strategy
  • JIS B 8392-1:2000 Compressed air for general use -- Part 1: Contaminants and quality classes
  • JIS B 8370:2000 Pneumatic fluid power -- General rules relating to systems
  • JIS W 1841:1994 Aerospace -- Hydraulic, pressure compensated, variable delivery pumps -- General requirements
  • JIS Z 8762-1:2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 1: General principles and requirements
  • JIS B 8627-1:2000 Gas engine driven heat pump air conditioners -- Part 1: General requirements
  • JIS B 8627-1:2006 Gas engine driven heat pump air conditioners -- Part 1: General requirements

FI-SFS, general flow of air

ESDU - Engineering Sciences Data Unit, general flow of air

  • ESDU 81004-1981 Mass flow and momentum functions for one-dimensional flow of gas in ducts.
  • ESDU 74030 B-2010 Characteristics of atmospheric turbulence near the ground Part I: definitions and general information
  • ESDU 74030 A-1976 Characteristics of atmospheric turbulence near the ground. Part I: definitions and general information.
  • ESDU 95011 B-2007 One-dimensional representation of steady@ spatially non-uniform flow. An equivalent mean-value set for compressible flow. Part 1. Implementation for an ideal@ calorically-perfect gas.
  • ESDU 95011 A-1998 One-dimensional representation of steady@ spatially non-uniform flow. An equivalent mean-value set for compressible flow. Part 1. Implementation for an ideal@ calorically-perfect gas

BE-NBN, general flow of air

  • NBN-EN 482-1994 Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents
  • NBN X 44-002-1976 Cleaning equipment for air and other gases - Dust sampling in gas flows and determination of the dustcontents of the gas
  • NBN-EN 50054-1993 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
  • NBN-EN 286-1-1991

Professional Standard - Machinery, general flow of air

  • JB/T 53054-1999 Product quality classification of reciprocating piston air compressors for general use
  • JB/T 53225-2000 Product quality classification of oil-injected sliding vane air compressors for general use
  • JB/T 53056-1999 Product quality classification of oil-injected screw air compressors for general use
  • JB/T 8472.1-1996 Performance measurement of vapor flow vacuum pump Part 1: Determination of pumping rate (volume flow rate)

HU-MSZT, general flow of air

American National Standards Institute （ANSI), general flow of air

Professional Standard - Nuclear Industry, general flow of air

  • EJ/T 1036-1996 General practices for air sampling in radiation workplace

API - American Petroleum Institute, general flow of air

  • API 26-60062-1969 AIR QUALITY MONOGRAPHS Monograph #69-9 Air Quality Standards for Carbon Monoxide
  • API MPMS 14.10-2007 Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluids Measurement Section 10—Measurement of Flow to Flares (FIRST EDITION)
  • API MPMS 22.1-2006 General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids (First Edition)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, general flow of air

  • GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow

IT-UNI, general flow of air

  • UNI EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry
  • UNI ISO 21360-1:2020 Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description
  • UNI 7837-1978 Metropolitan railways. Compressed air generating plants on board coaches. General dimensioning criteria.

YU-JUS, general flow of air

  • JUS N.B2.479-1994 Low voltage electrical installations - Effects of current passing through the human body - Part 1 : General aspects

U.S. Military Regulations and Norms, general flow of air

Indonesia Standards, general flow of air

  • SNI 04-6545.1-2001 Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures. Part 1: General requirements

NL-NEN, general flow of air

  • NEN 2690-1991 Air leakage of buildings Method of measurement of the specific air flow rate between crawl space and dwelling
  • NEN 2038-1979 Air quality - Calibration gas mixture of nitrogen monoxide in nitrogen - Gravimetric preparation
  • NEN 2041-1982 Air quality — Ambient air — Photometric determination of the nitrogen monoxide content (oxidation/Saltzman method)
  • NEN 2045-1981 Air quality - The calibration of measuring methods for nitrogen monoxide, nitrogen dioxide and ozone by means of gas-phase titration

American Society for Testing and Materials (ASTM), general flow of air

  • ASTM D3249-95(2000) Standard Practice for General Ambient Air Analyzer Procedures
  • ASTM D3249-95(2019) Standard Practice for General Ambient Air Analyzer Procedures
  • ASTM F1793-97(2016)e1 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service
  • ASTM F1793-97(2021) Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service
  • ASTM D3249-95(2005) Standard Practice for General Ambient Air Analyzer Procedures
  • ASTM D3249-95(2011) Standard Practice for General Ambient Air Analyzer Procedures

National Aeronautics and Space Administration (NASA), general flow of air

  • NASA NACA-TR-496-1935 General theory of aerodynamic instability and the mechanism of flutter
  • NASA NACA-RM-E50H23-1950 Correlation of forced-convection heat-transfer data for air flowing in smooth platinum tube with long-approach entrance at high surface and inlet-air temperatures
  • NASA NACA-TN-3283-1954 Aerodynamic forces, moments, and stability derivatives for slender bodies of general cross section

CEN - European Committee for Standardization, general flow of air

  • PREN 13098-2018 Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements
  • EN ISO 5167-1:1995 Measurement of Fluid Flow by Means of Pressure Differential Devices - Part 1: Orifice Plates@ Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full

CH-SNV, general flow of air

  • SN EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

SG-SPRING SG, general flow of air

  • SS 254 Pt.0-1981 SPECIFICATION FOR Electrical Apparatus for Explosive Gas Atmospheres Part 0: General Introduction

ES-AENOR, general flow of air

International Electrotechnical Commission (IEC), general flow of air

  • IEC 60334-1:1970 Air dielectric rotary variable capacitors. Part 1 : General requirements for tests and measuring methods
  • IEC 60730-2-15:2017 Automatic electrical controls - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
  • IEC 61557-1:2019 RLV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
  • IEC 63086-1:2020 Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General requirements

European Committee for Electrotechnical Standardization（CENELEC）, general flow of air

  • EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
  • EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
  • EN IEC 63086-1:2020 Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General requirements

GB-REG, general flow of air

Building Officials and Code Administrators International(U.S.), general flow of air

国家市场监督管理总局、中国国家标准化管理委员会, general flow of air

  • GB/T 24959-2019 Refrigerated light hydrocarbon fluids—General requirements for temperature measurement system in cargo tanks of LNG carrier

Canadian Standards Association (CSA), general flow of air

  • CSA Z223.2-M86-CAN/CSA-1986 Method for the Continuous Measurement of Oxygen, Carbon Dioxide, Carbon Monoxide, Sulphur Dioxide, and Oxides of Nitrogen in Enclosed Combustion Flue Gas Streams General Instruction No 1 R(1999)

PT-IPQ, general flow of air

  • NP EN 286-1-2000 Simple unfired pressure vessels designed to contain air or nitrogen Part 1:Pressure vessels for general purposed

The American Road & Transportation Builders Association, general flow of air

  • AASHTO TP59-1999 Standard Test Methnod for Determining Air Content of Hardened Portland Cement Concrete by High Pressure Air Meter 2000 Edition

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., general flow of air

  • IEEE 119-1974 RECOMMENDED PRACTICE FOR GENERAL PRINCIPLES OF TEMPERATURE MEASUREMENT AS APPLIED TO ELECTRICAL APPARATUS
  • IEEE 119-1975 RECOMMENDED PRACTICE FOR GENERAL PRINCIPLES OF TEMPERATURE MEASUREMENT AS APPLIED TO ELECTRICAL APPARATUS

CENELEC - European Committee for Electrotechnical Standardization, general flow of air

  • EN 61557-1:1997 Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1@5 kV d.c. - Equipment for Testing@ Measuring or Monitoring of Protective Measures Part 1: General Requirements

中华人民共和国环境保护部, general flow of air

  • GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

Illuminating Engineering Society of North America, general flow of air

  • IESNA LM-45-2000 Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps

Institute of Electrical and Electronics Engineers (IEEE), general flow of air

  • IEEE Std 119-1974 IEEE Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical Apparatus

  What is the amount of lead and cadmium in the air, General requirements for on-line verification of flowmeters with mobile gas flow standard devices, General air compressor performance, Concentration of carbon monoxide in normal air, general flow of air.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved