ZH
RU
ES

Standard Graduated Cylinders and Graduated Cylinders

Standard Graduated Cylinders and Graduated Cylinders, Total:195 items.

In the international standard classification, Standard Graduated Cylinders and Graduated Cylinders involves: Continuous handling equipment, Analytical chemistry, Telecommunication terminal equipment, Measurement of volume, mass, density, viscosity, Barrels. Drums. Canisters, Paints and varnishes, Earthworks. Excavations. Foundation construction. Underground works, Fasteners for aerospace construction, Equipment for petroleum and natural gas industries, Products of the textile industry, Inks. Printing inks, Cereals, pulses and derived products, Agricultural machines, implements and equipment, Fluid storage devices, Plastics, Laundry appliances, Sports equipment and facilities, Lamps and related equipment, Products of non-ferrous metals, Glass, Cases. Boxes. Crates, Paper products, Bearings, Audio, video and audiovisual engineering, Coatings and related processes used in aerospace industry, Quality, Fibre optic communications, Acoustics and acoustic measurements, Aids for disabled or handicapped persons, Construction materials, Metalliferous minerals, Road vehicle systems, Soil quality. Pedology, Petroleum, petroleum products and natural gas handling equipment, Interior finishing, Cans. Tins. Tubes, Pipeline components and pipelines, Insulation, Office machines, Metrology and measurement in general, Electromechanical components for electronic and telecommunications equipment, Iron and steel products.

American Society for Testing and Materials (ASTM), Standard Graduated Cylinders and Graduated Cylinders

ASTM G143-03(2009) Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM G143-03(2018) Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM E1272-02(2007) Standard Specification for Laboratory Glass Graduated Cylinders
ASTM E1272-95(1999) Standard Specification for Laboratory Glass Graduated Cylinders
ASTM E1272-02(2019) Standard Specification for Laboratory Glass Graduated Cylinders
ASTM E1272-02(2012) Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM F1181-09(2014) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM D4707-09 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D4707-09(2013) Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D4707-97 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D4707-09(2017) Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D4564-08e1 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM D4564-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM D6419-00(2005) Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
ASTM D6419-00 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
ASTM D6419-00(2009) Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
ASTM D6419-00(2017) Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
ASTM D5998-10 Standard Specification for Molded Polyethylene Shipping and Storage Drums
ASTM D5998-03 Standard Specification for Molded Polyethylene Shipping and Storage Drums
ASTM D5998-96 Standard Specification for Molded Polyethylene Shipping and Storage Drums
ASTM D5998-16 Standard Specification for Molded Polyethylene Shipping and Storage Drums
ASTM D1586/D1586M-18 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM D1586-11 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM F2844-11(2015) Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM F2844-11(2016) Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM B19-95 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks (Blanks)
ASTM C1351M-96(2012) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pamiddot;s and 10⁸ Pamiddot;s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM F2246-06e1 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
ASTM D5571-22 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tight-head Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
ASTM D4832-95e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D4832-16e1 Standard test method for preparation and testing of controlled low strength material (CLSM) test cylinders
ASTM C1351M-96(2022) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa·s and 10⁸ Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM D4832-02 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM E279-97(2001) Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
ASTM E279-97 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
ASTM D5571-94(2001)e1 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
ASTM D5571-94(1999) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
ASTM D5571-94(2010) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
ASTM D6640-01(2015) Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM G185-06(2016) Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G185-06(2020)e1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G185-06(2012) Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM D2683-98 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
ASTM D2683-20 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
ASTM E617-18 Standard Specification for Laboratory Weights and Precision Mass Standards
ASTM E617-23 Standard Specification for Laboratory Weights and Precision Mass Standards
ASTM G56-18 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials

BE-NBN, Standard Graduated Cylinders and Graduated Cylinders

NBN 370.03-1956
NBN 749-1968 Meting over een groep tanden (Wildhabermaat)

National Metrological Verification Regulations of the People's Republic of China, Standard Graduated Cylinders and Graduated Cylinders

JJG 524-1988 Verification Regulation of Raingauge and Measuring Cylinder

HU-MSZT, Standard Graduated Cylinders and Graduated Cylinders

Institute of Electrical and Electronics Engineers (IEEE), Standard Graduated Cylinders and Graduated Cylinders

IEEE 269a-2012 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets; Amendment 1
IEEE Std 1206-1994 IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
IEEE 269-2019 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
IEEE 269-2010 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets

CZ-CSN, Standard Graduated Cylinders and Graduated Cylinders

CSN 39 5111-1985 Pressures and energy of cartridges
CSN 70 4102-1987 Laboratory glassware - Measuring cylinders - Part 2: Graduated measuring cylinders with ring marks at main points
CSN 70 4102-2-1995 Laboratory glassware-Measuring cylinders-Part 2:Graduated measruring cylinders with ring marks at main points
CSN 85 5210 Za-1988
CSN 36 1005-03 Z1-1996 Electrical appliances for household and similar use. Limit values, methods of measurement and evaluation of noise. Automatic drum washing machines
CSN 36 1005 Cast.03-1984 Electrical appliamces for household and similar use. Critical values, methods of measurement and evaluation of noise. Automatic drum Washers.

RO-ASRO, Standard Graduated Cylinders and Graduated Cylinders

SR 4248-1995 Mass measures. Cylindrical steel weights, class 4 and 5
STAS 10269-1975 Machine-tools aggregates DRILL UNITS WITH SPINDLE SLEEVE AND ADJUSTING SLIDE Provisions lor geometric accuracy

European Committee for Standardization (CEN), Standard Graduated Cylinders and Graduated Cylinders

EN 12710:2006 Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
EN 12710:1999 Fibreboard Drums - Removable Head (Open Head) Drums with Closing Rings with a Nominal Capacity of 15 l to 250 l
EN 12714:2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection - Design standard
prEN 60456-1992 Methods of measuring the performance of horizontal drum type electric washing machines and spin extractors
PREN 17116-2-2017 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers
EN 12752-2:1999 Gas-Fired Type B Tumble Dryers of Nominal Heat Input Not Exceeding 20 kW - Part 2: Rational Use of Energy

German Institute for Standardization, Standard Graduated Cylinders and Graduated Cylinders

DIN EN 12710:2006 Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l English version of DIN EN 12710:2006-08
DIN EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection; design standard; German version EN 3611:1995
DIN EN 23-1:1978 Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board
DIN EN 17116-2:2019-05 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers; German version EN 17116-2:2018
DIN EN 12714:2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 60 l; English version of DIN EN 12714:2009-10
DIN 108-9:1988-09 Slide projectors and slides; straight cartridge 5 × 5-36 and 5 × 5-50; gauge for cartridge profile and gear system
DIN EN 17116-2:2017 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers; German and English version prEN 17116-2:2017
DIN EN 17116-2:2019 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers
DIN 6647-1:2006 Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 3 bar, nominal volume up to 50 litres
DIN 6647-2:2006 Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 7 bar, nominal volume up to 50 litres

GM North America, Standard Graduated Cylinders and Graduated Cylinders

GM GMC220-1988 Metric Hexagon Socket Gages and Gaging General Data
GM GMC210-1988 Penetration Gages and Gaging for Metric 6-Lobed Sockets General Data

Canadian Standards Association (CSA), Standard Graduated Cylinders and Graduated Cylinders

CSA C361-92-CAN/CSA-1992(R2008) Test Method for Measuring Energy Consumption and Drum Volume of Electrically Heated Household Tumble-Type Clothes Dryers Third Edition
CSA C361-92-CAN/CSA-1992 D閠ermination de la capacit?du tambour et m閠hodes d抏ssai de la consommation d掗nergie des s閏heuses 閘ectrodomestiques ?s閏hage par culbutage Troisi鑝e Edition; Mise ?jour no 1
CSA C361-M89-CAN/CSA-1989 Test Method for Measuring Energy Consumption and Drum Volume of Electrically Heated Household Tumble-Type Clothes Dryers.General Instruction No 1

American National Standards Institute （ANSI), Standard Graduated Cylinders and Graduated Cylinders

ANSI/IEEE 269:2010 Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
ANSI/ASA S1.15-3-2021 American National Standard Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
ANSI/TIA-1083-A-2010 Telecommunications - Telephone Terminal Equipment - Handset - Magnetic Measurement Procedures and Performance Requirements

Korean Agency for Technology and Standards (KATS), Standard Graduated Cylinders and Graduated Cylinders

KS T ISO 15750-2:2004 Non-removable head(tight head) steel drumswith a minimum total capacity of 212 L, 216.5 L and 230 L
KS T ISO 15750-2:2015 Packaging — Steel drums — Part 2: Non-removable head(tight head)drums with a minimum total capacity of 212 L, 216.5 L and 230 L
KS C IEC 60399:2003 Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring
KS M ISO 11093-4:2008 Paper and board－Testing of cores－Part 4：Measurement of dimensions
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS B ISO 9398-2-2007(2017) Specifications for industrial laundry machines－Definitions and testing of capacity and consumption characteristics－Part 2：Batch drying tumblers
KS B ISO 9398-2-2007(2022) Specifications for industrial laundry machines－Definitions and testing of capacity and consumption characteristics－Part 2：Batch drying tumblers
KS M ISO 11093-3:2008 Paper and board－Testing of cores－Part 3：Determination of moisture content using the oven drying method

Underwriters Laboratories (UL), Standard Graduated Cylinders and Graduated Cylinders

UL 1686 BULLETIN-2023 UL Standard for Safety Pin and Sleeve Configurations
UL 1576-2018 UL Standard for Safety Flashlights and Lanterns (First Edition)
UL 783 BULLETIN-2001 UL Standard for Safety Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations
UL 1682-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Second Edition)
UL 1682-2017 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Fifth Edition)
UL 1682-2007 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Third Edition)
UL 1576 BULLETIN-2017 UL Standard for Safety Flashlights and Lanterns (COMMENTS DUE: October 9@ 2017)

RU-GOST R, Standard Graduated Cylinders and Graduated Cylinders

GOST 1770-1974 Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

British Standards Institution (BSI), Standard Graduated Cylinders and Graduated Cylinders

BS EN 3611:1995 Spigots - Dimensions and fit selection - Design standard
BS ISO 7507-1:2004 Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Strapping method
BS EN 12707:2000 Plastic drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l
BS EN 17116-2:2018 Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics - Batch drying tumblers
BS EN 50594:2018 Household and similar electric appliances. Methods for measuring the performance of tumble dryers intended for commercial use
BS EN IEC 61300-3-33:2022 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Examinations and measurements. Withdrawal force from a resilient alignment sleeve using pin gauges
BS DD IEC/TS 60318-7:2011 Electroacoustics. Simulators of human head and ear. Head and torso simulator for the measurement of hearing aids
BS ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
BS EN 12752-2:1999 Gas-Fired Type B Tumble Dryers of Nominal Heat Input Not Exceeding 20 kW - Part 2: Rational Use of Energy
BS EN 1458-2:1999 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Rational use of energy
20/30428322 DC BS EN IEC 61300-3-33. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-33. Examinations and measurements. Withdrawal force from a resilient alignment sleeve using pin gauges
BS EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4c - Voltage proof of pre-insulated crimp barrels

International Organization for Standardization (ISO), Standard Graduated Cylinders and Graduated Cylinders

ISO 3232:1974 Paints and varnishes; Determination of quantity of material in a container
ISO 3232:1975 Paints and varnishes; Determination of quantity of material in a container
ISO 15750-2:2002 Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l
ISO 4112:1979 Cereals and pulses — Measurement of the temperature of grain stored in silos
ISO 7507-1:1993 Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 1: strapping method
ISO 9398-3:1993 Specifications for industrial laundry machines; definitions and testing of capacity and consumption characteristics; part 3: washing tunnels
ISO 7507-3:2006 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 3: Optical-triangulation method
ISO 7507-3:1993 Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 3: optical-triangulation method
ISO 21995:2008 Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3,5 t - Acquisition and use of reference values using a roller brake tester
ISO 9398-2:1993 Specifications for industrial laundry machines; definitions and testing of capacity and consumption characteristics; part 2: batch drying tumblers
ISO 20848-3:2006 Packaging - Plastics drums - Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
ISO 10193:2000 General use light gauge metal containers - Nominal filling volumes of round cylindrical and tapered containers of up to 40000 ml

CU-NC, Standard Graduated Cylinders and Graduated Cylinders

NC 31-16-1987 Rubber Industry. Railway Bearings and Platens. Quality Specifications

Society of Automotive Engineers (SAE), Standard Graduated Cylinders and Graduated Cylinders

SAE AS954-1967 DESIGN DATA AND STANDARDIZATION of THIN WALL 12-POINT SOCKETS AND BOX WRENCHES for AEROSPACE ENGINE USE

FI-SFS, Standard Graduated Cylinders and Graduated Cylinders

SFS 8988-1986 In case of interpretation disputes the Finnish text applies
SFS 8979-1986 In case of interpretation disputes the Finnish text applies
SFS 8980-1986 In case of interpretation disputes the Finnish text applies
SFS 8978-1986 In case of interpretation disputes the Finnish text applies

Indonesia Standards, Standard Graduated Cylinders and Graduated Cylinders

SNI 7695-2011
SNI 7465-2008 Revolving cylindrical flat drying machines for coffee and cocoa beans, quality and testing requirements

AASHTO - American Association of State Highway and Transportation Officials, Standard Graduated Cylinders and Graduated Cylinders

M 277-2006 Standard Specification for Wire Rope and Sockets for Movable Bridges
M277-1981 Standard Specification for Wire Ropes and Sockets for Movable Bridges (Nineteenth Edition)
M 277-1981 Standard Specification for Wire Rope and Sockets for Movable Bridges (HM-22; Part IB)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Standard Graduated Cylinders and Graduated Cylinders

GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method

Military Standard of the People's Republic of China-General Armament Department, Standard Graduated Cylinders and Graduated Cylinders

GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density

NL-NEN, Standard Graduated Cylinders and Graduated Cylinders

NEN 1759-1982 Laboratory glassware Graduated measuring cylinders with and without stopper

IN-BIS, Standard Graduated Cylinders and Graduated Cylinders

Professional Standard - Railway, Standard Graduated Cylinders and Graduated Cylinders

TB/T 2876-1998 Wall thickness measurement of thin-walled plain bearings and thin-walled cylindrical bearings

National Association of Corrosion Engineers (NACE), Standard Graduated Cylinders and Graduated Cylinders

NACE RP0303-2003 Standard Recommended Practice Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control (Item No. 21101)

Association Francaise de Normalisation, Standard Graduated Cylinders and Graduated Cylinders

NF C61-504:1994 Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring.
NF C73-594*NF EN 50594:2018 Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use
NF EN 50594:2018 Appareils électrodomestiques et analogues - Méthodes de mesure de l'aptitude à la fonction pour les sèche-linge à tambour à usage commercial
NF D28-400-2*NF EN 1458-2:2012 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2 : rational use of energy
NF C93-903-33*NF EN IEC 61300-3-33:2022 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33 : examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges
NF EN IEC 61300-3-33:2022 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-33 : examens et mesures - Force d'extraction d'un manchon d'alignement élastique, avec utilisation de calibres de broches
NF D28-400-1*NF EN 1458-1:2012 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1 : safety
NF M87-256-2*NF EN ISO 17078-2:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 2 : flow-control devices for side-pocket mandrels
NF C66-419:1986 Insulators and fittings for overhead lines. Metal fittings. "Go" and "not go" gauges for thimbles and pins for insulators.
NF P93-321*NF EN 1065:1999 Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests.
NF E11-012:1992 Length measuring instruments. Plain plug standard gauges and standard discs.

European Committee for Electrotechnical Standardization（CENELEC）, Standard Graduated Cylinders and Graduated Cylinders

HD 222-1974 Standard Sheets for Barrel Thread for E14 and E27 Lampholder with Shade Holder Ring
EN 50594:2018 Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use

(U.S.) Telecommunications Industries Association , Standard Graduated Cylinders and Graduated Cylinders

TIA-1083-A-2010 Telecommunications Telephone Terminal Equipment Handset Magnetic Measurement Procedures and Performance Requirements
TIA-1083-2007 Telecommunications T elephone Terminal Equipment Handset Magnetic Measurement Procedures and Performance Requirements

ES-UNE, Standard Graduated Cylinders and Graduated Cylinders

UNE-EN 17116-2:2020 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers
UNE-EN 50594:2019 Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use
UNE-EN IEC 61300-3-33:2022/AC:2023-05:2023 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges
UNE 27761:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Single flange penetration piece with sleeve
UNE 27766:2018 Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece with sleeve for PN10 and PN16

API - American Petroleum Institute, Standard Graduated Cylinders and Graduated Cylinders

API MPMS 8.5-2015 Manual of Petroleum Measurement Standards Chapter 8.5 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils@ Condensates@ and Liquid Petroleum Products (First Edition)

Defense Logistics Agency, Standard Graduated Cylinders and Graduated Cylinders

DLA MIL-DTL-83511 A SUPP 1-2004 HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATION FOR
DLA MIL-DTL-83511 A-2004 HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATION FOR

Group Standards of the People's Republic of China, Standard Graduated Cylinders and Graduated Cylinders

T/SCQA 419-2023 Technical specification for precast monolithic composite concrete structure accessories (Grouting sleeve）
T/SCQA 418-2023 Technical specification for precast monolithic composite concrete structure accessories (Cementitious grout for Grouting sleeve）

International Electrotechnical Commission (IEC), Standard Graduated Cylinders and Graduated Cylinders

IEC 60399:2002 Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring
IEC 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
IEC 60399/AMD1:1997 Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring; Amendment 1
IEC 60399/AMD2:1999 Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring; Amendment 2

AT-ON, Standard Graduated Cylinders and Graduated Cylinders

ONORM S 1391 Teil.29-1989 Pistol and revolver cartridge and Chamber; caliber 357 Magnum

Danish Standards Foundation, Standard Graduated Cylinders and Graduated Cylinders

DS/EN 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
DS/EN 12149:1998 Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release

AENOR, Standard Graduated Cylinders and Graduated Cylinders

UNE 27026:2013 Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Shipside roller fairleads

Lithuanian Standards Office , Standard Graduated Cylinders and Graduated Cylinders

LST EN 61300-3-33-2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins (IEC 61300-3-33:2012)
LST EN 12149-2002 Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Graduated Cylinders and Graduated Cylinders

GB/T 25964-2010 Petroleum and liquid petroleum products.Determination of volume,density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems

Association of German Mechanical Engineers, Standard Graduated Cylinders and Graduated Cylinders

DVS 2206-5-2011 Non-destructive tests on piping made of thermoplastics - Angle measurement on welded joints executed by means of sleeve welding with an incorporated heating element (HM) and heated tool sleeve welding (HD)

CEN - European Committee for Standardization, Standard Graduated Cylinders and Graduated Cylinders

EN 17116-2:2018 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers

KR-KS, Standard Graduated Cylinders and Graduated Cylinders

KS B ISO 9398-2-2023 Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 2: Batch drying tumblers

IT-UNI, Standard Graduated Cylinders and Graduated Cylinders

UNI 7971-1979

ACI - American Concrete Institute, Standard Graduated Cylinders and Graduated Cylinders

ACI 313R-1991 Commentary on Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials
ACI 313-1991 Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials
ACI 313R-1997 Commentary on Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials

Professional Standard - Machinery, Standard Graduated Cylinders and Graduated Cylinders

JB/T 9179.8-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 8: Ring, cylinder segment and flange

TH-TISI, Standard Graduated Cylinders and Graduated Cylinders

TIS 9004-1991 Standard for quality management and quality system elements. Guidelines