ZH

RU

ES

Bulk Density Detection

Bulk Density Detection, Total:498 items.

In the international standard classification, Bulk Density Detection involves: Measurement of volume, mass, density, viscosity, Coals, Fertilizers, Metalliferous minerals, Cutting tools, Powder metallurgy, Products of the chemical industry, Fuels, Pesticides and other agrochemicals, Nuclear energy engineering, Construction materials, Refractories, Soil quality. Pedology, Analytical chemistry, Inorganic chemicals, Milk and milk products, Paint ingredients, Air quality, Wood, sawlogs and sawn timber, Paper and board, Paper products, Rubber, Tea. Coffee. Cocoa, Plastics, Ceramics, Cereals, pulses and derived products, Road engineering, Machine tools, Thermodynamics and temperature measurements, Farming and forestry, Organic chemicals, Insulating fluids, Road vehicles in general, Food products in general, Petroleum products in general, Mining and quarrying, Waxes, bituminous materials and other petroleum products, Welding, brazing and soldering, Wastes, Laboratory medicine, Metrology and measurement in general, Jewellery, Rubber and plastics products, Non-destructive testing, Magnetic materials, Photography, Electricity. Magnetism. Electrical and magnetic measurements, Raw materials for rubber and plastics, Earthworks. Excavations. Foundation construction. Underground works, Products of the textile industry, Bridge construction, Non-ferrous metals.


American Society for Testing and Materials (ASTM), Bulk Density Detection

  • ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM UOP563-14 Packed Apparent Bulk Density of Molecular Sieves
  • ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM UOP294-93 Apparent Bulk Density of Catalyst Particles
  • ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
  • ASTM UOP778-81 Apparent Bulk Density of Extruded Catalyst
  • ASTM UOP762-76 Apparent Bulk Density of Solid Phosphoric Acid Catalyst
  • ASTM D5057-90(1996) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM C357-94(2002)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM C357-94(1998) Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM C357-07(2015) Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM D4531-86(1996) Standard Test Methods for Bulk Density of Peat and Peat Products
  • ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
  • ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
  • ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D5057-90(2006) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-90(2001) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM C29/C29M-07 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
  • ASTM D5057-10 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM E2006-05 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
  • ASTM D4052-18a Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-18 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bulk Density Detection

  • GB/T 13566.1-2008 Fertilizers.Determination of bulk density.Part 1:Loose density
  • GB/T 13566-1992 Determination of bulk density for fertilizers
  • GB 6286-1986 Method for Determination of Bulk Density of Molecular Sieve
  • GB/T 6286-1986 Determination of bulk density for molecular sieve
  • GB/T 23771-2009 Determination of bulk density for inorganic chemical products
  • GB/T 21877-2015 Dyestuffs and intermediate of dyes.Determination of tapping density
  • GB/T 21877-2008 Dyestuffs and intermediate of dyes.Determination of tapping density
  • GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
  • GB/T 16913.3-1997 Methods of dust character test--Part 3: Determination of bulk density--Natural bulk method
  • GB/T 20316.2-2006 Abrasive grains. Determination of bulk density. Part 2: Microgrits
  • GB/T 20316.1-2009 Abrasive grains.Determiantaion of bulk density.Part 1:Macrogrits
  • GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities
  • GB/T 14145-1993 Determination of Stacking Fault Density of Silicon Epitaxial Layer by Interference Phase Contrast Microscopy
  • GB/T 5518-2008 Inspection of grain and oil.Determination of relatively density of grain and oilseeds
  • GB/T 11718.4-1989 Medium density fiberboard--Determination of density
  • GB/T 13531.4-2013 General methods on determination of cosmetics.Determination of relative density
  • GB/T 4472-2011 Detemination of density and relative density for chemical products
  • GB/T 14853.4-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of mass strength
  • GB/T 43139-2023 Density testing of cast aluminum alloy liquid reduced pressure solidification samples
  • GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter

Professional Standard - Agriculture, Bulk Density Detection

  • 128药典 四部-2020 0900 Property Inspection Method 0993 Bulk Density and Tap Density Determination Method
  • NY/T 1121.23-2010 Soil testing.Part 23:Method for determination of soil particle density
  • NY/T 4241-2022 Determination of free-flow bulk density of green and roasted coffee whole beans (conventional method)
  • 127药典 四部-2020 0900 Property Inspection Method 0992 Solid Density Determination Method
  • 313药典 四部-2020 4000 Testing method for drug packaging material 4012 Density determination method for drug packaging material
  • NY/T 82.5-1988 Determination of Relative Density

National Metrological Verification Regulations of the People's Republic of China, Bulk Density Detection

VN-TCVN, Bulk Density Detection

  • TCVN 4778-2009 Coal.Determination of bulk density
  • TCVN 4778-2015 Coal - Determination of bulk density for the use in charging of coke ovens
  • TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
  • TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities

International Organization for Standardization (ISO), Bulk Density Detection

  • ISO 3944:1992 Fertilizers; determination of bulk density (loose)
  • ISO 9136:1989 Abrasive macrograins; determination of bulk density
  • ISO 5311:1983 Fertilizers — Determination of bulk density (tapped)
  • ISO 5311:1992 Fertilizers; determination of bulk density (tapped)
  • ISO 9161:2004 Uranium dioxide powder - Determination of apparent density and tap density
  • ISO 6782:1982 Aggregates for concrete; Determination of bulk density
  • ISO/CD 18708:2023 Solid recovered fuels — Determination of bulk density
  • ISO 8967:2005 | IDF 134:2005 Dried milk and dried milk products — Determination of bulk density
  • ISO 7837:1992 Fertilizers; determination of bulk density (loose) of fine-grained fertilizers
  • ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
  • ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2: Microgrits
  • ISO 7971-3:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method
  • ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density

Association Francaise de Normalisation, Bulk Density Detection

  • NF A20-200*NF ISO 3852:1989 Iron ores. Determination of bulk density.
  • NF ISO 3852:1989 Minerais de fer - Détermination de la masse volumique apparente
  • NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
  • NF U42-403*NF EN 1237:1995 Fertilizers. Determination of bulk density (tapped).
  • NF EN ISO 9161:2021 Poudre de dioxyde d'uranium - Détermination de la masse volumique apparente et de la masse volumique après tassement
  • NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
  • NF EN ISO 17828:2016 Biocombustibles solides - Détermination de la masse volumique apparente
  • NF EN ISO 10545-3:2018 Carreaux et dalles céramiques - Partie 3 : détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale
  • NF EN ISO 845:2009 Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente
  • NF EN ISO 29470:2020 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
  • NF EN 1602:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
  • NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
  • NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
  • NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
  • NF ISO 15100:2001 Plastiques - Fibres de renfort - Fils coupés - Détermination de la masse volumique apparente
  • NF EN ISO 23145-1:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 1 : masse volumique après tassement
  • NF EN ISO 23145-2:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 2 : Masse volumique sans tassement
  • NF EN 15761:2010 Supports de culture préformés - Détermination de la longueur, de la largeur, de la hauteur, du volume et de la masse volumique apparente
  • NF EN ISO 3923-1:2018 Poudres métalliques - Détermination de la masse volumique apparente - Partie 1 : méthode de l'entonnoir
  • NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
  • NF ISO 5017:2013 Produits réfractaires façonnés denses - Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN ISO 61:1999 Matières plastiques - Détermination de la masse volumique apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné
  • NF EN 14617-1:2013 Pierre agglomérée - Méthodes d'essai - Partie 1 : détermination de la masse volumique apparente et du coefficient d'absorption d'eau
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF ISO 3939:2006 Transmissions hydrauliques et pneumatiques - Garnitures à lèvres multiples - Méthodes de mesurage des hauteurs d'empilage
  • NF EN ISO 60:1999 Plastiques - Détermination de la masse volumique apparente des matières susceptibles de s'écouler à travers un entonnoir donné
  • NF EN 993-1:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 1 : détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
  • NF B42-009:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 9 : determination of untamped bulk density.
  • NF B42-008:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 8 : determination of tapped bulk density.
  • NF EN 1097-3:1998 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 3 : méthode pour la détermination de la masse volumique en vrac et de la porosité intergranulaire
  • NF B51-005:1985 Wood. Determination of density.
  • NF EN 12697-7:2022 Mélanges bitumineux - Méthodes d'essai - Partie 7 : détermination de la masse volumique apparente des éprouvettes bitumineuses par les rayons gamma
  • NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet

AENOR, Bulk Density Detection

  • UNE 32205:1984 COKE. DETERMINATION OF BULK DENSITY.
  • UNE-EN 1236:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE).
  • UNE-EN 1237:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (TAPPED).
  • UNE-EN ISO 7837:2001 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE) OF FINE-GRAINED FERTILIZERS. (ISO 7837:1992)
  • UNE 53137:1977 PLASTICS. PVC RESINS. DETERMINATION OF THE COMPACTED APPARENT BULK DENSITY
  • UNE-EN 1015-6:1999 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR
  • UNE-EN 1015-6:1999/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • UNE-EN 1015-10:2000/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
  • UNE-EN 1097-3:1999 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS.
  • UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
  • UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
  • UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
  • UNE-EN ISO 10545-3:1997 CERAMIC TILES. PART 3: DETERMINATION OF WATER ABSORPTION, APPARENT POROSITY, APPARENT RELATIVE DENSITY AND BULK DENSITY. (ISO 10545-3:1995), INCLUDING TECHNICAL CORRIGENDUM 1:1997).
  • UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
  • UNE-EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)

CZ-CSN, Bulk Density Detection

  • CSN 44 1367-1963 Determination of the bulk density of coke
  • CSN 44 1324-1985 Determination of the bulk density of coal for special purposes
  • CSN 44 1324-1963 Determination of ?he bulk density of coal for special purposes
  • CSN 44 1320-1984 Hard-coal coke Determination of bulk density in a small vessel
  • CSN IEC 737:1994 In-core temperature or primary envelope temperature measurements in nuclear power reactor. Characteristics and test methods
  • CSN 49 0108-1993 Determination of the density
  • CSN 38 5522-1983 Caseous fuels. Deteranination of density and relative density
  • CSN 72 2113-1987 Determination of cement density
  • CSN 66 6616-1983 Photography materials on a clearing base. Determination o? minimum density, maximum density and fog density.
  • CSN 64 0111-1993 Plastics. Determination of Density and Relative Density of Non-cellular Plastic
  • CSN ISO 6276:1994 Concrete,compacted fresh.Determination of decsity

YU-JUS, Bulk Density Detection

  • JUS U.M1.009-1993 Concrete - Determination of bulk density of concrete
  • JUS D.A1.044-1979 Test ofwood Determination ofdensity
  • JUS D.A8.064-1985 Testing ofplywood. Determination ofdensity
  • JUS D.C8.114-1983 Testing of particle boards. Determination ofdensity
  • JUS H.B8.763-1982 Testing ofpesticides. Determination of bulk density
  • JUS H.P5.001-1991 Testing of pesticides. Determination of density of concentrated suspensions
  • JUS D.A8.085-1984 Testing of fibre building boards. Determination ofdensity
  • JUS B.B8.101-1982 Testing of mineral filler. The determination ofdensity of filler.
  • JUS H.N8.203-1988 Testing ofpaperand-hoard. Determination of the thickness ofsingle sheets and method ofcalculation of the apparent density ofboard
  • JUS B.H8.618-1981 Testing of bitumen. Relative density and density
  • JUS H.M8.114-1982 Testing of accessory materials for rubber industr/. Determination of pour density of pelleted carbon black
  • JUS B.B7.113-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of apparent density

Standard Association of Australia (SAA), Bulk Density Detection

Lithuanian Standards Office , Bulk Density Detection

  • LST EN 1237-2002 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
  • LST ISO 6782:1995 Aggregates for concrete. Determination of bulk density
  • LST EN 1236-2002 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
  • LST EN ISO 12625-3:2005 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005)
  • LST ISO 8967:2006 Dried milk and dried milk products - Determination of bulk density (identical ISO 8967:2005)
  • LST EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992)
  • LST EN 725-9-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
  • LST EN 1015-6-2002 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • LST EN 1015-6-2002/A1-2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • LST EN 1015-10-2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • LST EN 1015-10-2002/A1-2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • LST EN 725-8-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
  • LST EN 1097-3-2002 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • LST EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
  • LST EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)

IN-BIS, Bulk Density Detection

Danish Standards Foundation, Bulk Density Detection

  • DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
  • DS/EN ISO 7837:2000 Fertilizeres - Determination of bulk density (loose) of fine-grained fertilizers
  • DS/EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
  • DS/EN 1015-6/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • DS/EN 1015-6:1999 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • DS/EN 1015-10/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • DS/EN 1015-10:2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • DS/EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
  • DS/EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method
  • DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • DS/EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
  • DS/EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • DS/EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip

Japanese Industrial Standards Committee (JISC), Bulk Density Detection

未注明发布机构, Bulk Density Detection

  • BS EN 1236:1995(2010) Fertilizers — Determination of bulk density (loose)
  • BS EN 1237:1995(2010) Fertilizers — Determination of bulk density (tapped)
  • BS ISO 8967:2005(2006) Dried milk and dried milk products — Determination of bulk density
  • BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers
  • BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
  • DIN EN 384:2004 Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density
  • BS ISO 3852:2007(2008) Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
  • BS 3482-10:1991(1999) Methods of test for Desiccants — Part 10 : Determination of bulk density (dry basis)
  • DIN EN 12390-7:2019 Testing of hardened concrete – Part 7: Bulk density of hardened concrete
  • BS EN 1094-4:1995(1999) Insulating refractory products — Part 4 : Determination of bulk density and true porosity
  • DIN EN ISO 7971-3:2019 Cereals – Determination of bulk density, so-called mass per hectoliter – Part 3: Routine procedures (ISO 7971-3:2019)
  • BS 1902-3.17:1990(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.17 Determination of volume and bulk density of dense shaped products (methods 1902 - 317)
  • BS 6404-13:1996(1999) Magnetic materials — Part 13 : Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip

HU-MSZT, Bulk Density Detection

RU-GOST R, Bulk Density Detection

  • GOST 27801-1993 Alumina. Method for the determination of bulk density
  • GOST 13673-1976 Turf. Method for determination of bulk density
  • GOST R 55450-2013 Organic fertilizers. Method for determination of bulk density
  • GOST 28512.1-1990 Mineral fertilizers. Methods for determination of bulk density (topped)
  • GOST ISO 1013-1995 Coke determination of bulk density in a large container
  • GOST 28512.2-1990 Mineral fertilizers. Method for determination of bulk density (loose)
  • GOST 25699.14-1993 Rubber compounding ingredients. Carbon black (pelletized). Determination of pour density
  • GOST ISO 8460-2015 IInstant coffee. Determination of free-flow and compacted bulk densities
  • GOST ISO 7971-3-2021 Cereals. Determination of bulk density, called mass per hectolitre. Part 3. Routine method
  • GOST ISO 7971-3-2013 Determination of bulk density, called mass per hektolitre. Part 3. Routine method
  • GOST 28512.3-1990 Mineral fertilizers. Method for determination of bulk density (loose) of fine-grained fertilizers
  • PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density
  • GOST 8.024-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density
  • GOST 8.024-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring density of liquid
  • GOST 28506-1990 Fuel assemblies in nuclear power WWER reactors. Fuel failure detection methods
  • GOST 15139-1969 Plastics. Methods for the determination of density (mass density)
  • GOST 25714-1983 Non-destructive control. Acoustic sound method of open porosity, apparent density, density and compression strength testing of refractory articles
  • GOST 25732-1988 Iron and manganese ores, concentrates, agglomerates and pellets. Methods for determination of real, middle, bulk density and porosity
  • GOST 23785.4-2001 Cord fabric. Method for determination of linear dimensions, density according to warp and weft, surface density
  • GOST 23785.4-1979 Cord fabric. Method for determination of linear dimensions, density according to warp and welf, surface density

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bulk Density Detection

  • GB/T 33810-2017 Testing method of bulk density for pesticides
  • GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
  • GB/T 35390-2017 Non-destructive testing—Test method of ammunition density by industrial computed tomography(CT)
  • GB/T 35386-2017 Non-destructive testing—Density resolution phantom for industrial computed tomography (CT) testing

Korean Agency for Technology and Standards (KATS), Bulk Density Detection

  • KS A ISO 9161:2009 Uranium dioxide powder-Determination of apparent density and tap density
  • KS L 6509-2001 Testing method for bulk density of artificial abrasives
  • KS L 6509-1974 Testing method for bulk density of artificial abrasives
  • KS E ISO 567-2002(2017) Metallic and other non-organic coatings-Measurement of coating thicknesses-Fizeau multiple-beam interferometry method
  • KS L ISO 5017-2013(2018) Dense shaped refractory products?Determination of bulk density, apparent porosity and true porosity
  • KS L 6529-2013 Test method for bulk density of artificial abrasive microgrits
  • KS L 6528-2018 Test method for bulk density of artificial abrasive macrogrits
  • KS B ISO 1708:2014 General purpose parallel lathes — Testing of the accuracy
  • KS B ISO 1708:2007 General purpose parallel lathes-Testing of the accuracy
  • KS C IEC 61224-2012(2022) Nuclear reactors-Response time in resistance temperature detectors(RTD)-In situ measurements
  • KS L 6529-2003(2008) Test method for bulk density of artificial abrasive microgrits
  • KS M 1968-2002 Acetaldihyde for industrial use-Determination of density at 15℃
  • KS C IEC 60911:2004 Measurements for monitoring adequate cooling within the core of pressurized light water reactors
  • KS C IEC 61224-2012(2017) Nuclear reactors-Response time in resistance temperature detectors(RTD)-In situ measurements
  • KS F 2505-2017(2022) Methods of test for bulk density of aggregates and solid content in aggregates
  • KS M 0004-2019 Test methods for density and relative density of chemical products
  • KS C IEC 60404-13-2002(2022) Magnetic materials-Part 13:Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • KS B ISO 3939-2006(2016) Fluid power systems and components -Multiple lip packing sets - Methods for measuring stack heights
  • KS C IEC 60404-13-2002(2017) Magnetic materials-Part 13:Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip

British Standards Institution (BSI), Bulk Density Detection

  • BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
  • BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
  • DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density
  • BS ISO 8967:2005 Dried milk and dried milk products. Determination of bulk density
  • BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
  • BS ISO 1013:2020 Coke. Determination of bulk density in a large container
  • 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
  • DD CEN/TS 15401:2006 Solid recovered fuels — Methods for the determination of bulk density
  • 21/30397451 DC BS ISO 567. Coke. Determination of bulk density in a small container
  • BS EN ISO 11272:2017 Tracked Changes. Soil quality. Determination of dry bulk density
  • BS ISO 15100:2000 Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
  • BS ISO 567:2021 Tracked Changes. Coke. Determination of bulk density in a small container
  • BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
  • BS EN ISO 10545-3:2018 Tracked Changes. Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
  • BS EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
  • BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
  • BS EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders - Untapped density
  • BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
  • BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
  • 21/30436585 DC BS EN 15761. Pre-shaped growing media. Determination of the dimensions measured and bulk density
  • BS EN ISO 7971-3:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Routine method
  • BS EN 12697-7:2022 Tracked Changes. Bituminous mixtures. Test methods. Determination of the bulk density of bituminous specimens by gamma rays
  • 18/30382725 DC BS EN 12697-6. Bituminous mixtures. Test methods. Part 6. Determination of bulk density of bituminous specimens
  • BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • BS 5752-11:1987 Methods of test for coffee and coffee products. Instant coffee: determination of free-flow and compacted bulk densities
  • BS 1902 Sec.3.17:1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
  • BS EN IEC 60404-13:2018 Tracked Changes. Magnetic materials. Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
  • BS 1384-2:2001 Photographic density measurements - Geometric conditions for transmission density
  • BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
  • BS 1902-3.17:1990 Methods of testing refractory materials - General and textural properties - Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • 20/30426156 DC BS EN 12697-7. Bituminous mixtures. Test methods. Part 7. Determination of the bulk density of bituminous specimens by gamma rays

German Institute for Standardization, Bulk Density Detection

  • DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN EN ISO 17828:2016-05 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
  • DIN CEN/TS 15401:2010-09*DIN SPEC 1122:2010-09 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
  • DIN EN ISO 7837:2000 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
  • DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
  • DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
  • DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
  • DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
  • DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
  • DIN EN 1237:1995-08 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995
  • DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density; German version EN 15761:2009 / Note: To be replaced by DIN EN 15761 (2022-01).
  • DIN 52182:1976 Testing of wood; determination of density
  • DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
  • DIN EN 1236:1995-08 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995
  • DIN EN ISO 7837:2000-06 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
  • DIN EN ISO 10545-3:2018-06 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018); German version EN ISO 10545-3:2018
  • DIN ISO 9136-2:2000-07 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN EN 15761:2022-01 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021 / Note: Date of issue 2021-12-10*Intended as replacement for DIN EN 15761 (2010-04).
  • DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
  • DIN 1996-7:1992 Testing of asphalt; determination of bulk density, compacted density, void content and degree of compaction
  • DIN 54410:1985 Testing of ion exchangers; determination of density
  • DIN EN ISO 12625-3:2014-09 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014
  • DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN EN ISO 17892-2:2015-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
  • DIN 51757:1994 Testing of mineral oils and related materials; determination of density
  • DIN EN 772-4:1998-10 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
  • DIN EN 12697-6:2020 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • DIN EN 12697-6:2020-05 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2020
  • DIN EN ISO 7971-3:2020-02 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019); German version EN ISO 7971-3:2019
  • DIN 32525-4:1985 Testing of filler metals by means of weld metal specimens; test piece for determining the hardness for surfacing
  • DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
  • DIN ISO 3939:1978-08 Fluid Power Systems and Components; Multiple Lip Packing Sets, Methods for Measuring Stack Heights
  • DIN EN ISO 23145-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007); German version EN ISO 23145-1:2016
  • DIN EN ISO 23145-2:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012); German version EN ISO 23145-2:2016
  • DIN 52170-1:2023-02 Determination of composition of hardened concrete - Part 1: General, terms, sampling and dry-bulk density
  • DIN EN 1094-4:1995-09 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995
  • DIN EN 1097-3:1998-06 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
  • DIN 51757:2011 Testing of mineral oils and related materials - Determination of density
  • DIN EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
  • DIN EN IEC 60404-13:2020-06 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018); German version EN IEC 60404-13:2018 / Note: DIN EN 60404-13 (2008-05) remains valid alongside this...
  • DIN 51870:1981 Testing of gaseaus fuels and other gases; determination of relative density according to the balance method and calculation of density
  • DIN EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • DIN EN 12697-7:2020 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German and English version prEN 12697-7:2020
  • DIN EN 12697-7:2022-04 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2022
  • DIN 4512-10:1993 Photographic sensitometry, determination of optical density; geometric conditions for reflection density
  • DIN 66137-2:2019-03 Determination of solid state density - Part 2: Gaspycnometry
  • DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
  • DIN 51618:1989-06 Testing of liquefied petroleum gases; calculation of density at 15 °C, 20 °C and 50 °C
  • DIN 4512-8:1993 Photographic sensitometry, determination of optical density; geometric conditions for transmission density

RO-ASRO, Bulk Density Detection

Universal Oil Products Company (UOP), Bulk Density Detection

  • UOP 563-2014 Packed Apparent Bulk Density of Molecular Sieves
  • UOP 778-2007 Packed Apparent Bulk Density (ABD) of Extruded Catalyst
  • UOP 294-2014 Apparent Bulk Density of Catalyst Particles

Professional Standard - Chemical Industry, Bulk Density Detection

  • HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts

BE-NBN, Bulk Density Detection

European Committee for Standardization (CEN), Bulk Density Detection

  • CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
  • EN 20534:1993 Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density (ISO 534 : 1988)
  • EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)
  • EN 1237:1995 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
  • EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • prEN ISO 23145-1 rev Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007)
  • EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
  • FprEN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

Group Standards of the People's Republic of China, Bulk Density Detection

  • T/CISA 099-2021 Determination of apparent density,bulk density and porosity for iron tailings
  • T/GXAS 010-2018 Determination of Density and Relative Density of Gum Turpentine by Densitometer Method

CH-SNV, Bulk Density Detection

国家市场监督管理总局、中国国家标准化管理委员会, Bulk Density Detection

Professional Standard - Machinery, Bulk Density Detection

  • JB/T 7984.2-1999 Conventional abrasive.Determination of bulk density of macrogrits
  • JB/T 3584-1999 Super-hard abrasive Method for determining bulk density
  • JB/T 3584-2012 Superabrasive.Testing method of bulk density
  • JB/T 6220-2011 Non-destructive testing instruments.The densimeter for radiography
  • JB/T 13156-2017 Non-destructive testing.Test method for determining the density of industrial radiographs

International Dairy Federation (IDF), Bulk Density Detection

  • IDF 134-2005 Dried milk and dried milk products - Determination of bulk density

GOSTR, Bulk Density Detection

  • GOST 34260-2017 Glass fiber. Chopped strands. Determination of bulk density

Professional Standard - Coal, Bulk Density Detection

  • MT/T 739-1997 Determination of the bulk density of coal in a small container
  • MT/T 740-1997 Determination of the bulk density of coal in a larger container
  • MT/T 740-2011 Determination of bulk density of Coal in a larger container
  • MT/T 739-2011 Determination of bulk density of Coal in a small container

CEN - European Committee for Standardization, Bulk Density Detection

  • PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
  • PD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
  • PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • EN 993-1:2018 Methods of Test for Dense Shaped Refractory Products - Part 1: Determination of Bulk Density@ Apparent Porosity and True Porosity

National Metrological Technical Specifications of the People's Republic of China, Bulk Density Detection

SE-SIS, Bulk Density Detection

  • SIS SS 16 11 43-1982 Plastics - Determination of apparent bulk density of compacted moulding material
  • SIS SS IEC 737:1984 Nuclear instrumentation — In-core temperature or primary envelope temperature measurements in nuclear power reactors — Characteristics and test methods
  • SIS SS IEC 911:1988 Nuclear instrumentation — Measurements for monitoring adequate cooling within the core of pressurized light water reactors
  • SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
  • SIS SS IEC 639:1981 Nuclear instrumentation - Nuclear reactors - Use of the protection system for non-safety purposes
  • SIS SS 11 42 10-1979 Ultrasonic testing of fusion welds in ferritic steels
  • SIS 18 41 11-1973 Paints. Determination of density
  • SIS 11 10 25-1964 Determination of density of metals
  • SIS 18 41 11-1962 Paints. Determination of density

ES-UNE, Bulk Density Detection

  • UNE-EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015)
  • UNE-EN ISO 10545-3:2018 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
  • UNE-EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) (Endorsed by AENOR in June of 2016.)
  • UNE-EN ISO 17892-2:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
  • UNE-EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) (Endorsed by AENOR in June of 2016.)
  • UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-EN 772-4:1999 METHODS OF TEST FOR MASONRY UNITS - PART 4: DETERMINATION OF REAL AND BULK DENSITY AND OF TOTAL AND OPEN POROSITY FOR NATURAL STONE MASONRY UNITS
  • UNE-EN 12697-6:2022 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • UNE-EN ISO 7971-3:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019)
  • UNE-EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)

Military Standard of the People's Republic of China-General Armament Department, Bulk Density Detection

  • GJB 772.113-1994 Test methods for explosives - Wet method for determination of bulk density
  • GJB 772.114-1994 Test methods for explosives - Dry method for determination of bulk density
  • GJB 771.101-1989 Gunpowder Performance Test Methods Determination of Bulk Density
  • GJB/J 5230-2003 Calibration procedures for smoke density tester
  • GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method
  • GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density

BR-ABNT, Bulk Density Detection

Professional Standard - Commodity Inspection, Bulk Density Detection

  • SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density
  • SN/T 2383-2009 Liquid chemical products.Determination of density and relative density.Digital density meter method

KR-KS, Bulk Density Detection

The American Road & Transportation Builders Association, Bulk Density Detection

  • AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
  • AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
  • AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
  • AASHTO T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, Bulk Density Detection

  • T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • T19/T19M-2000 "Standard Method of Test for Bulk Density (""Unit Weight"") and Voids in Aggregate (Twentieth Edition; ASTM C29/C29M-97)"

Guangdong Provincial Standard of the People's Republic of China, Bulk Density Detection

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Bulk Density Detection

  • GJB 5891.2-2006 Test method of loading material for initiating explosive device Part 2: Measurement of bulk density
  • GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
  • GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method

Indonesia Standards, Bulk Density Detection

  • SNI 03-6756-2002 Test method for determination of asphalted hardening density level
  • SNI 19-4956-1998 Test method for relative density, specific gravity and density (of homogeneous liquid)

AT-ON, Bulk Density Detection

  • ONORM L 1068-1988 Physical investigations ofsoil; determination ofsoil density
  • OENORM EN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

IAEA - International Atomic Energy Agency, Bulk Density Detection

  • NS-G-4.2-2006 Maintenance@ Periodic Testing and Inspection of Research Reactors

国家能源局, Bulk Density Detection

  • SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping

TR-TSE, Bulk Density Detection

  • TS 768-1969 DETERMINATION OF THE DENSITY AND RELATTVE DENSITY OF ESSENTIAL OILS

Professional Standard - Hygiene , Bulk Density Detection

  • WS/T 463-2015 Measurement of serum low density lipoprotein cholesterol

Professional Standard - Nuclear Industry, Bulk Density Detection

  • EJ/T 686-1992 Detection method of 235U enrichment in reactor fuel rods Gamma-ray energy spectrometry
  • EJ/T 686-2005 Measurement method for U enrichment of PWR fuel rod by gamma spectrometry

Professional Standard - Light Industry, Bulk Density Detection

  • QB/T 2855-2007 Jewellery-Nondestructive quantitative determination of precious metal-Consistency syntheses method

Guangxi Provincial Standard of the People's Republic of China, Bulk Density Detection

  • DB45/T 2482-2022 Technical specification for detection of mildew on medium density fiberboard

Professional Standard - Electron, Bulk Density Detection

  • SJ/T 10216-1991 Determination of density for magnetic oxide powders.Determination of tap density
  • SJ/T 11826-2022 Online detection method of electrostatic charge density in pipeline liquids

国家质量监督检验检疫总局, Bulk Density Detection

  • SN/T 2383-2017 Liquid chemical products.Determination of density and relative density.Digital density meter method

American National Standards Institute (ANSI), Bulk Density Detection

  • ANSI/IEEE 1308:1994 Recommended Practice for Instrumentation for Magnetic Flux Density and Electric Field Strength Meters – 10Hz to 3kHz

农业农村部, Bulk Density Detection

  • NY/T 2870-2015 Microscopic imaging method for rapid detection of linear density of jute and kenaf fibers

PL-PKN, Bulk Density Detection

NZ-SNZ, Bulk Density Detection

  • NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density

CENELEC - European Committee for Electrotechnical Standardization, Bulk Density Detection

  • EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet

FI-SFS, Bulk Density Detection

Society of Motion Picture and Television Engineers (SMPTE), Bulk Density Detection

  • SMPTE RP 15-1997 Calibration of Densitometers Used for Black-and-White Photographic Density Measurement

Jiangxi Provincial Standard of the People's Republic of China, Bulk Density Detection

  • DB36/T 1197-2019 Regulations for testing the density of grouting in bridge prestressed tunnels




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved