ZH
RU
ES
General autoclave size
General autoclave size, Total:114 items.
In the international standard classification, General autoclave size involves: Internal combustion engines for road vehicles, Chipless working equipment, Road vehicle systems, Aerospace fluid systems and components, Refractories, Bottles. Pots. Jars, Fluid power systems, Textile machinery, Linear and angular measurements, Pipeline components and pipelines, Machine tool systems, Switchgear and controlgear, Installations in buildings, Transformers. Reactors, Bearings, Fasteners, Galvanic cells and batteries, Railway rolling stock, Construction materials, Agricultural machines, implements and equipment, Rubber and plastics products, Aerospace electric equipment and systems, Insulation, Electrical equipment for working in special conditions, Components for electrical equipment, Electrical accessories.
Korean Agency for Technology and Standards (KATS), General autoclave size
- KS R ISO 13296:2010 Diesel engines-High-pressure fuel injection pipe assemblies-General requirements and dimensions
- KS R ISO 13296:2015 Diesel engines－High-pressure fuel injection pipe assemblies－General requirements and dimensions
International Organization for Standardization (ISO), General autoclave size
- ISO 13296:2012 Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions
- ISO 13296:2016 Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions
- ISO 14541:2013 Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
- ISO 10649-1:2013 Cutter arbors with parallel key and tenon drive.Part 1: General dimensions
- ISO 3228:2013 Rolling bearings - Cast and pressed housings for insert bearings - Boundary dimensions and tolerances
- ISO 14540:2013 Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
British Standards Institution (BSI), General autoclave size
- BS ISO 13296:2012 Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
- BS C 9:1970 Specification for coupling dimensions for high pressure air charging valves for aircraft
- BS ISO 9057:1995 Glass containers - 28mm tamper-evident finish for pressurized liquids - Dimensions
- BS EN 15805:2009 Particulate air filters for general ventilation - Standardised dimensions
- BS EN 15805:2010 Particulate air filters for general ventilation. Standardised dimensions
- BS 6600-1:1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using YEI-1 laminations
- BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
- BS EN 61056-2:2013 General purpose lead-acid batteries (valve-regulated types). Dimensions, terminals and marking
- BS EN 61056-2:2012 General purpose lead-acid batteries (valve-regulated types). Dimensions, terminals and marking
- BS EN 61021-1:1997 Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment. Specification for dimensions
- BS 4742-6:1988 Hydraulic equipment for agricultural machinery - Specification for dimensions and location of agricultural tractor hydraulic return to sump porting
- BS ISO 2635:2003 Aircraft - Conductors for general purpose aircraft electrical cables and aerospace applications - Dimensions and characteristics
- BS EN 61021-1:1990 Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Specification for dimensions
- BS 6600-10:1985 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using the Q range of C-cores
- BS ISO 5597:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
- BS ISO 14540:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
- ISO 8062-4:2023 Geometrical product specifications. Dimensional and geometrical tolerances for moulded parts - Rules and general tolerances for castings using profile tolerancing in a general datum system
- BS EN 14535-1:2005+A1:2011 Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
RO-ASRO, General autoclave size
German Institute for Standardization, General autoclave size
- DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021
- DIN EN 15805:2010 Particulate air filters for general ventilation - Standardised dimensions; German version EN 15805:2009
- DIN ISO 3601-2:2010 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
- DIN EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature; German version EN 15818:2011
- DIN 16963-9:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
- DIN 3334:1968 Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions
- DIN 43620-4:1981 Low-voltage high-rupturing-capacity fuses with blade contacts 500 and 660 V a.c. and 440 d.c.; replacement handle for the sizes 00 up to 3; dimensions of the engaging part
RU-GOST R, General autoclave size
- GOST 12774-1967 Universal straps, strengvthened. Design and dimensions
- GOST 16341-1970 Support holder for a 4000 kg force rolling head. Construction and dimensions
- GOST R 51262.1-1999 Refractory rectangular products of general use. Form and sizes
- GOST 16339-1970 Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions
- GOST 16340-1970 Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
- GOST R 50497-1993 Textile machinery and accessories. Flat steel healds for general use. Dimensions
- GOST 17385-1972 Guide pins of plastic moulds and die casting dies. Construction and dimensions
- GOST 14817-1969 Stamped go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions
- GOST 13964-1974 Union tees for tube connections on external cone. Construction and dimensions
- GOST 13165-1967 Compression springs for machine retaining devices. Design and dimensions
- GOST 16718-1971 Flanged shanks for dies sheet pressing. Construction and dimensions
- GOST 16719-1971 Floating shanks for dies of sheet pressing. Construction and dimensions
- GOST 13971-1974 Connector tees for tube connections on external cone. Construction and dimensions
- GOST 14820-1969 Stamped go plain plug gauges of not full-form with diameter over 100 to 160 mm. Design and dimensions
- GOST 13071-1967 Carrage holders for nipping laminated wide cutters. Design and dimensions
- GOST 13219.15-1981 Hign cups with grooves for fat, diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
- GOST 13219.16-1981 High cups with grooves for, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
- GOST 13966-1974 Flange union tees for tube connections on external cone. Construction and dimensions
- GOST 16030-1970 Square and oblong through holes for fasteners. Shape and dimensions
- GOST 14821-1969 Stamped no-go plain plug gauges of not full-form with diameter over 75 to 160 mm. Design and dimensions
- GOST 13219.3-1981 High vague end cups for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
- GOST 13219.4-1981 High vague end cups for diameters from 110 till 400 mm of pillow blocks. Constuction and dimensions
- GOST 16717-1971 Shouldered and threaded shanks for dies of sheet pressing. Construction and dimensions
- GOST 15862-1981 Plate blanks round of die sets for sheet stamping dies for dividing operations. Construction and dimensions
- GOST 18070-1972 Clamping bushings with a shoulder for tools with a cylindrical tail. Design and dimensions
- GOST 18076-1972 Arbors for changeable cutter arbors and clamping bushings for turret automatics. Design and dimensions
- GOST 16061-1970 Flange union tees for tube connections on internal cone. Construction and dimensions
- GOST 33431-2015 High-voltage boxes of passenger cars for locomotive traction and multiple units. General specifications
- GOST 13219.9-1981 High cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
- GOST 13219.10-1981 High cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
- GOST 18073-1972 Arbors for tangential cutters and clamping bushings for turret automatics. Design and dimensions
- GOST 18075-1972 Arbors for the skew fixing of cutters and clamping bushing for turret lathes. Design and dimensions
- GOST 11525-1982 Plain bearing metal bushes for pilow blocks and for flange plain bearing blocks. Design and dimensions
- PNST 60-2015 Polymer soextrusion film modified nanocomposites. General specifications
- GOST 17742-1972 Double-ended handles for plain plug-gauges with inset inserts from 1 mm nominal diameter. Design and dimensions
- GOST 20159-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 100x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
- GOST R 56735-2015 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Part 1. Definitions, information and general principles
- GOST 33798.5-2016 Electric equipment for rolling stock. Part 5. Electrotechnical components. Rules for HV fuses. General specifications
- GOST 8951-1975 Ductile iron fittings with parallel thread for pipelines. Straight four-way junction pieces. Basic dimensions
- GOST 8953-1975 Ductile iron fittings with parallel thread for pipelines. Four-way junction pieces with two passages. Basic dimensions
- GOST 25346-2013 Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits
Society of Automotive Engineers (SAE), General autoclave size
- SAE J760-1999 Dimensional Specifications for General Service Sealed Lighting Units
- SAE J760-2004 Dimensional Specifications for General Service Sealed Lighting Units
- SAE J2337-2-2002 Connections for Fluid Power and High Pressure Use Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 2: Stud End Requirements, Dimensions, Design, and Test Methods
- SAE J2337-2-2012 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Rings Sealing Part 2: Stud End Requirements, Dimensions, Design and Test Methods
Association Francaise de Normalisation, General autoclave size
- NF E29-728:1971 Vacuum technology - Flat flanges for ultra-high vacuum - Dimensions.
- NF C93-357-1*NF EN 62317-1:2015 Ferrite cores - Dimensions - Part 1 : general specification
- NF E48-550:2010 Fluid power systems - O-rings - Part 2 : housing dimensions for general applications.
- NF C64-471-1/A1:2012 High-voltage switchgear and controlgear - Part 1: common specifications
- NF P83-005*NF EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature
- NF C58-560-2*NF EN 61056-2:2013 General purpose lead-acid batteries (valve-regulated types) - Part 2 : dimensions, terminals and marking
- NF EN IEC 63182-1:2020 Noyaux en poudre magnétique comprimée - Lignes directrices concernant les dimensions et les limites des irrégularités de surface - Partie 1 : spécification générale
- NF E22-313*NF ISO 3228:2013 Rolling bearings - Cast and pressed housings for insert bearings - Boundary dimensions and tolerances
- NF E48-040:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications.
- NF E02-352:2013 Geometrical product specifications (GPS) - General tolerances (dimensional and geometrical) for cutted and bended workpieces
- NF H96-203:2015 Machines for compacting waste materials or recyclable fractions - Static compactors - Interface between the compaction unit and the container - Functional dimensions and particular specifications
- NF C93-357-2*NF EN 62317-2:2010 Ferrite cores - Dimensions - Part 2 : pot-cores for use in telecommunications, power supply, and filter applications
- NF A49-281:1992 Steel tubes,tubular accessories,bends,tee,reduction for welding made from seamless tube with quality specifications - Dimensions - Technical delivery conditions
ZA-SANS, General autoclave size
- SANS 62271-301:2010 High-voltage switchgear and controlgear Part 301: Dimensional standardisation of high-voltage terminals
- SANS 62271-1:2008 High-voltage switchgear and controlgear Part 1: Common specifications
SAE - SAE International, General autoclave size
- SAE J760-2008 Dimensional Specifications for General Service Sealed Lighting Units
- SAE J760-1997 Dimensional Specifications for General Service Sealed Lighting Units@ Recommended Practice (December 1974)
- SAE J760A-1974 Dimensional Specifications for General Service Sealed Lighting Units@ Recommended Practice (December 1974)
CY-CYS, General autoclave size
- CYS 104 Pt.1-1985 SPECIFICATION FOR HIGH DENSITY POLYETHYLENE (HDPE) PIPES FOR AGRICULTURAL APPLICATIONS Part 1: Dimensions and Pressure Ratings
CENELEC - European Committee for Electrotechnical Standardization, General autoclave size
- EN 50043:1985 Low-voltage switchgear and controlgear for industrial use Size numbers and gauges for flat connections
BE-NBN, General autoclave size
- NBN C 66-103-1977
- NBN-EN 200-1994 Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10. Minimum flow pressure of 0,05 MPa (0,5 bar)
European Committee for Standardization (CEN), General autoclave size
- EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature
- EN 200:1989 Sanitary Tapware; General Technical Specifications for Single Taps and Mixer Taps (Nominal Size 1/2) PN 10 Minimum Flow Pressure of 0.05 MPa (0.5 Bar)
Danish Standards Foundation, General autoclave size
- DS/EN 50043:1994 Low voltage switchgear and controlgear for industrial use - Size numbers and gauges for flat connections
American Society for Testing and Materials (ASTM), General autoclave size
- ASTM F2880-14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
- ASTM F3148-15 Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
PK-PSQCA, General autoclave size
- PS 1636-1984 SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC) FITT-INGS WITH PLAIN SOCKETS FOR PIPES UNDER PRESS-URE-DIMENSIONS OF SOCKETS-METRIC SERIES.
United States Navy, General autoclave size
- NAVY QPL-24694-1 NOTICE 2-2008 Valve, Hydraulic Relief, 1.5 - 35 Bars (22 -500 Pounds per Square Inch) Cartridge Type, General Specification (Metric)
- NAVY QPL-24694-2012 Valve, Hydraulic Relief, 1.5 - 35 Bars (22 - 500 Pounds Per Square Inch) Cartridge Type, General Specification (Metric)
American National Standards Institute （ANSI), General autoclave size
- BS ISO 8062-4:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules and general tolerances for castings using profile tolerancing in a general datum system (British Standard)
KE-KEBS, General autoclave size
- KS 06-149 Pt.2-1981 KENYA STANDARD SPECIFICATION FOR UPVC PIPES FOR COLD WATER SERVICES PART 2. DIMENSIONS, NOMINAL OUTSIDE DIAMETERS, WALL THICKNESS AND NOMINAL PRESSURES (METRIC SERIES)
SE-SIS, General autoclave size
- SIS SS 3649-1991 Pneumatic fluid power — Cylindrical quick- action couplings for maximum working pressures of 10 bar (1 MPa) — Plug connecting dimensions, specifications,application guidelines and testing
NL-NEN, General autoclave size
- NEN-EN 200-1993 Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10. Minimum flow pressure of 0,05 MPa (0,5 bar)