Why Material Identification Methods

Why Material Identification Methods, Total:71 items.

In the international standard classification, Why Material Identification Methods involves: Road engineering, Textile fibres, Protection against fire, Structures of buildings, Biology. Botany. Zoology, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Metrology and measurement in general, Paints and varnishes, Analytical chemistry, Protective equipment, Products of the chemical industry, Plastics, Spices and condiments. Food additives, Construction technology, Soil quality. Pedology, Fluid storage devices, Heat recovery. Thermal insulation, Cellular materials, Materials and components for railway engineering, Reinforced plastics.

SCC, Why Material Identification Methods

ASD-STAN prEN 6074:1970 Metallic materials - Test methods - Statistical data for material qualification
DANSK DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
NS-EN 12802:2011 Road marking materials — Laboratory methods for identification
UNE-EN 12802:2000 Road markin materials. Laboratory methods for identification.
NS-EN 12802:2000 Road marking materials — Laboratory methods for identification
DIN EN 6074 E:1999 Draft Document - Aerospace series - Metallic materials - Test methods; statistical data for material qualification
NS-EN 348:1992 Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal
AENOR UNE-EN 348:1994 Protective clothing - Test method: Determination of behavior of materials on impact of small splashes of molten metal
BS 5422:1990 Method for specifying thermal insulating materials on pipes, ductwork and equipment (in the temperature range -40°C to +700°C)
INT 88003-1988 Methods of test for electric cables, cords and conductors, Method 5.4 Fire tests - Determination of the amount of acid and corrosive gas evolved during the combustion of materials taken from cables (Proposed to become AS 1660.5.4)

German Institute for Standardization, Why Material Identification Methods

DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification; German version EN 12802:2011 / Note: To be replaced by DIN EN 12802 (2018-12).
DIN EN 348:1992-11 Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992 / Note: To be replaced by DIN EN ISO 9150 (2005-10).

Danish Standards Foundation, Why Material Identification Methods

DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
DS/EN 348+AC:1994 Protective clothing - Test method: Determination of behaviour of materials on impact of small splashes of molten metal

Lithuanian Standards Office , Why Material Identification Methods

LST EN 12802-2011 Road marking materials - Laboratory methods for identification
LST EN 348+AC-1998 Protective clothing - Test method: Determination of behaviour of materials on impact of small splashes of molten metal

AENOR, Why Material Identification Methods

UNE-EN 12802:2012 Road marking materials - Laboratory methods for identification

CEN - European Committee for Standardization, Why Material Identification Methods

PREN 12802-2018 Road marking materials - Laboratory methods for identification

North Atlantic Treaty Organization Standards Agency, Why Material Identification Methods

STANAG 4170-2008 PRINCIPLES AND METHODOLOGY FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE

Group Standards of the People's Republic of China, Why Material Identification Methods

T/CCFA 00012-2022 Qualitative identification of graphene material in fibers

Military Standard of the People's Republic of China-General Armament Department, Why Material Identification Methods

GJB 10276-2021 Test methods for identification of ship secondary shielding materials

NATO - North Atlantic Treaty Organization, Why Material Identification Methods

STANAG 4170-2001 Principles and Methodology for the Qualification of Explosive Materials for Military Use (ED 2)
STANAG 4170-1985 Principles and Methodology for the Qualification of Explosive Materials for Military Use (ED 1; Amendment 1: 10/22/1985)

British Standards Institution (BSI), Why Material Identification Methods

18/30382612 DC BS EN 12802. Road marking materials. Laboratory methods for identification
BS 5422:2008 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C
BS 5422:2009 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range –40 °C to +700 °C
BS 5422:2001 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C

US-CFR-file, Why Material Identification Methods

CFR 40-80.585-2014 Protection of Environment. Part80:Regulation of fuels and fuel additives.Section80.585:What is the process for approval of a test method for determining the sulfur content of diesel or ECA marine fuel?

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Why Material Identification Methods

PREN 6074-1998 Aerospace Series Metallic Materials Test Methods Statistical Data for Material Qualification (Edition P 1)

IT-UNI, Why Material Identification Methods

UNI 4179-1959 Surface treatment of metal materials. Methods for identifying the properties of metal coatings
UNI 3244-1966 Microscopic examination of ferrous materials. Methods for identification of non-metallic impurities in steel
UNI 4236-1959 Surface treatment of metal materials. Method for identification of changes in coating properties by chemical methods
UNI 6918-1971 Classification and identification of soldering irons. Soldering irons for different operating methods for first welding and filler welding of pipes of any material
UNI 5768-1966 Methods for chemical analysis of ferrous metal materials. Determination of manganese in magnesium alloys with magnesium and manganese content of 0.01-2.0%. Replace UNI 3726 with UNI 5767-66 P. Photometry

RU-GOST R, Why Material Identification Methods

GOST R 53293-2009 Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
GOST 8.588-2006 State system for ensuring the uniformity of measurements. State verification scheme for means of measuring of material optical density
GOST R 55229-2012 Food additives. Colorimetric method for total phosphorus mass content determination in raw materials for citric acid production
GOST R 53227-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of deformation and strength properties

IN-BIS, Why Material Identification Methods

IS 4472 Pt.3-1973 Methods for identification of application categories of dyes on textile materials Part III Man-made fibers
IS 4472 Pt.1-1967 Methods for identification of application categories of dyes on textile materials Part Ⅰ Cotton and other cellulosic fibers
IS 4472 Pt.2-1968 Methods for identification of application categories of dyes on textile materials Part II Wool, silk and other protein fibers

BELST, Why Material Identification Methods

STB GOST R 52173-2005 Raw material and food-stuffs. Method for the identification of genetically modified оrganisms (GMO) of plant origin

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Why Material Identification Methods

GB/T 32132-2015 DNA identification of wool, cashmere, duck's down, goose's down animal materials.Real-time fluorescence PCR method

Association Francaise de Normalisation, Why Material Identification Methods

NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
NF F01-281:2014 Railway rolling stock - Parts in fibre-reinforced thermosetting composites - Specifications, test methods, manufacturing, qualification and assessment of conformity

Heilongjiang Provincial Standard of the People's Republic of China, Why Material Identification Methods

DB23/T 453.1-2014 Technical requirements and identification methods for building materials mixed with waste residue Part 1: Cement and clinker

American Society for Testing and Materials (ASTM), Why Material Identification Methods

ASTM F3078-15(2023) Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
ASTM F2617-15(2023) Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM F3078-15 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
ASTM F2617-08e1 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM F2617-15 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM D5779-08 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D6979-03 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
ASTM D6979-08 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

SE-SIS, Why Material Identification Methods

SIS SS-EN 348-1992 Protective clothing — Test method — Determination of behaviour of materials on impact of small splashes of molten metal

Korean Agency for Technology and Standards (KATS), Why Material Identification Methods

KS M ISO 6999-2003(2018) Carbon materials for aluminum production - Pitch for electrodes - Density measurement - Pycnometer method

未注明发布机构, Why Material Identification Methods

ASTM RR-F40-1000 2008 F2617-Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM RR-F40-1005 2015 F2617-Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

KR-KS, Why Material Identification Methods

KS I 9205-1-2024 Identification of materials of biodegradable plastics — Part 1: Selective application of FTIR, DSC, Py-GC-MS, TGA or extracting methods

ES-AENOR, Why Material Identification Methods

UNE 55-817-1985 Photometric determination of detergent formulation raw materials using ethanol in methane (0.01 to 0.20% by volume)
UNE 55-818-1985 Colorimetric determination of detergent formulation raw materials using ethanol in methane (0.10 to 1.50% by volume)

Indonesia Standards, Why Material Identification Methods

SNI 03-6865-2002 Procedure for preparation of inter-laboratory testing program for determining precission of construction materials test method

GSO, Why Material Identification Methods

GSO ISO 2555:2015 Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method

ICEA - Insulated Cable Engineers Association Inc., Why Material Identification Methods

P-123-739-2018 Guide To Establish Electrical Test Methods for Non-Conducting Jacket Materials for Power Cables Rated 5 to 500 kV

GOST, Why Material Identification Methods

GOST R 70468-2022 Materials used for the manufacture of medical clothing. Standard method for determining the resistance of materials to the penetration of blood-borne pathogens using Phi-X174 bacteriophage as a test system