ZH
RU
ES

high energy x-rays and low energy x-rays

high energy x-rays and low energy x-rays, Total:499 items.

In the international standard classification, high energy x-rays and low energy x-rays involves: Radiation protection, Photography, Nuclear energy engineering, Non-destructive testing, Astronomy. Geodesy. Geography, Analytical chemistry, Electronic tubes, Medical equipment, Laboratory medicine, Protection against crime, Optics and optical measurements, Semiconductor devices, Freight distribution of goods, Radiation measurements, Iron and steel products, Optical equipment, Linear and angular measurements, Petroleum products in general, Rubber, Postal services, Crude petroleum, Electronic components in general, Electricity. Magnetism. Electrical and magnetic measurements, Glass, Medical sciences and health care facilities in general, Electrical accessories, Fuels, Items of art and handicrafts, Testing of metals, Metrology and measurement in general, Water quality, Inorganic chemicals, Soil quality. Pedology, Fertilizers, Applications of information technology, Lubricants, industrial oils and related products, Power stations in general, Wastes, Products of the chemical industry, Burners. Boilers, Cereals, pulses and derived products, Paper and board, Reinforced plastics, Vocabularies, Pipeline components and pipelines, Dentistry, Environmental protection.


Japanese Industrial Standards Committee (JISC), high energy x-rays and low energy x-rays

  • JIS Z 4302:2002 Gamma-ray and hard X-ray film badges
  • JIS Z 4302:1997 Gamma-ray and hard X-ray film badges
  • JIS Z 4503:1989 Methods of evaluating dose equivalent by film badges for gamma rays and hard X-ray
  • JIS Z 4930:2005 Phantoms for performance evaluation of X-ray bone densitometer
  • JIS Z 4930:2011 Phantoms for performance evaluation of X-ray bone densitometer
  • JIS Z 4752-3-1:2004 Evaluation and routine testing in medical imaging departments -- Part 3-1: Acceptance tests -- Imaging performance of X-ray equipment for radiographic and radioscopic systems
  • JIS Z 4751-2-54:2012 Medical electrical equipment -- Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • JIS Z 4751-2-54:2017 Medical electrical equipment -- Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • JIS K 0145:2002 Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales
  • JIS K 2541-4:2003 Crude oil and petroleum products -- Determination of sulfur content Part 4: Energy-dispersive X-ray fluorescence method
  • JIS Z 4752-3-5:2008 Evaluation and routine testing in medical imaging departments -- Part 3-5: Acceptance tests -- Imaging performance of computed tomography X-ray equipment
  • JIS Z 4751-2-44:2012 Medical electrical equipment -- Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
  • JIS K 0470:2008 Determination of arsenic and lead in clay and sand using energy-dispersive X-ray fluorescence spectrometry
  • JIS K 0152:2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
  • JIS Z 4752-3-5:2021 Evaluation and routine testing in medical imaging departments -- Part 3-5: Acceptance and constancy tests -- Imaging performance of computed tomography X-ray equipment
  • JIS K 0162:2010 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters

Professional Standard - Nuclear Industry, high energy x-rays and low energy x-rays

  • EJ/T 805-1993 Low Energy Photon Sources for X-ray Fluorescence Analysis
  • EJ/T 684-2016 Portable Energy Dispersive X-ray Fluorescence Analyzer
  • EJ/T 709-1992 Stationary Low Energy X and Gamma Emitter Personal Surface Contamination Monitor

RU-GOST R, high energy x-rays and low energy x-rays

  • GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
  • GOST 22091.7-1984 X-ray devices. The methods of the measuring of the uniformity of the distribution of the energe flyx density of the X-ray over the X-ray coverage
  • GOST 25645.118-1984 Cosmic X-rays of the discrete sources. Energy spectra and angular coordinates
  • GOST 25645.117-1984 Extragalactic diffuse gamma-and X-radiation. Characteristics of angular and energy distributions
  • GOST 25645.131-1986 Galactic diffuse gamma and X-rays. Characteristics of angular and energy distributions
  • GOST R 50267.2.54-2013 Medical electrical equipment. Part 2-54. Particular requirements for basic safety and essential performance of the X-ray equipment for radiography and radioscopy
  • GOST 25675-1983 High voltage connectors of medical X-ray apparatuses. Types and basic dimensions
  • GOST R IEC 60526-2001 High-voltage cable plug and socket connections for medical X-ray equipment
  • GOST R 51947-2002 Petroleum and petroleum products. Determination of sulphur by method of energy-dispersive X-ray fluorescence spectrometry
  • GOST 34239-2017 Petroleum products. Determination of sulfur content by the method of monochromatic energy dispersive X-ray fluorescence spectrometry
  • GOST 8.473-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed X-ray radiation fluence energy
  • GOST 32139-2013 Petroleum and petroleum products. Determination of sulfur content by method of energy dispersive X-ray fluorescence spectrometry
  • GOST R 51532-1999 Protective devices against diagnostic medical X-radiation. Part 1. Determination of attenuation properties of materials
  • GOST 17226-1971 Measureres for exposure rate measuring of gamma and X radiations with photon energy of 8 to 480 fj. Technical requirements and test methods
  • GOST R 56811-2015 Polymer composites. Radiography of the outer layers and the material of the inner layer of the sandwich constructions
  • GOST 33305-2015 Lubricating oils. Method for determination of phosphorus, sulfur, calcium and zinc by energy dispersive X-ray fluorescence spectroscopy
  • GOST R EN ISO 20847-2010 Petroleum products. Determination of sulfur content in automotive fuels by energy-dispersive X-ray fluorescence spectrometry

AT-ON, high energy x-rays and low energy x-rays

  • ONORM S 5213-1983 X-ray protective clothes, X-ray protective clothes with lower shielding-effect and protective devices for medical use of X-rays up to 300 kV
  • OENORM EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi

Korean Agency for Technology and Standards (KATS), high energy x-rays and low energy x-rays

  • KS A IEC 61137-2003(2013) Radiation protection instrumentation－Installed personnel surface contamination monitoring assembly－Low energy X and gamma emitters
  • KS A 4702-1997(2012) Capacitor discharge X- ray apparatus for chest indirect radiography
  • KS C IEC 60759:2009 Standard test procedures for semiconductor X-ray energy spectrometers
  • KS C IEC 60759-2009(2019) Standard test procedures for semiconductor X-ray energy spectrometers
  • KS A 4722-1996(2016) High voltage cable plug and socket for medical X-ray equipment
  • KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS A ISO 14146:2007 Radiation protection-Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation
  • KS C IEC 60613:2003 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
  • KS C IEC 60613:2017 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
  • KS D ISO 15470-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
  • KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS A IEC 61137:2003 Radiation protection instrumentation-Installed personnel surface contamination monitoring assembly-Low energy X and gamma emitters
  • KS M ISO 8754:2019 Petroleum products－Determination of sulfur content－Energy dispersive X－ray fluorescence method
  • KS M ISO 8754:2016 Petroleum products－Determination of sulfur content－Energy dispersive X－ray fluorescence method
  • KS C IEC 60526:2021 High-voltage cable plug and socket connections for medical X-ray equipment
  • KS C IEC 61331-1:2003 Protective devices against diagnostic medical X-radiation－Part 1：Determination of attenuation properties of materials
  • KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
  • KS D ISO 15472-2003(2018)
  • KS C IEC 60601-2-54:2012 Medical electrical equipment-Parts 2-54:Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • KS C IEC 61223-3-1-2005(2010) Evaluation and routine testing in medical imaging departments－Part 3－1：Acceptance tests－Imaging performance of X-ray equipment for radiographic and radioscopic systems
  • KS C IEC 60601-2-44:2011 Medical electrical equipment－Part 2-44：Particular requirements for the basic safety and essential performance of x-ray equipment for computed tomography
  • KS C IEC 60601-2-44:2017 Medical electrical equipment－Part 2-44：Particular requirements for the basic safety and essential performance of x-ray equipment for computed tomography
  • KS C IEC 61283:2005 Radiation protection instrumentation-Direct reading personal dose equivalent(rate) monitors-X, gamma and high energy beta radiation
  • KS C IEC 61283:2016 Radiation protection instrumentation－Direct reading personal dose equivalent(rate) monitors－X, gamma and high energy beta radiation
  • KS C IEC 61283-2005(2015) Radiation protection instrumentation－Direct reading personal dose equivalent(rate) monitors－X, gamma and high energy beta radiation
  • KS M ISO 8754:2003 Petroleum products-Determination of sulfur content-Energy dispersive X-ray fluorescence method
  • KS A IEC 60532-2016(2021) Radiation protection instrumentation－Installed dose ratemeters, warning assemblies and monitors－X and gamma radiation of energy between 50 keV and 7 MeV
  • KS C IEC 61223-3-1:2013 Evaluation and routine testing in medical imaging departments－Part 3－1：Acceptance tests－Imaging performance of X-ray equipment for radiographic and radioscopic systems
  • KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
  • KS C IEC 61331-1:2019 Protective devices against diagnostic medical X-radiation — Part 1: Determination of attenuation properties of materials
  • KS A ISO 4037-4:2008 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy-Part 4:Calibration of area and personal dosemeters in low energy X reference radiation fields
  • KS A ISO 4037-1-2003(2018)
  • KS D ISO 15470:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
  • KS M ISO 20847-2006(2021) Petroleum products－Determination of sulfur content of automotive fuels－Energy－dispersive X－ray fluorescence spectrometry
  • KS M ISO 20847-2006(2016) Petroleum products－Determination of sulfur content of automotive fuels－Energy－dispersive X－ray fluorescence spectrometry
  • KS C IEC 61223-3-6:2021 Evaluation and routine testing in medical imaging departments —Part 3-6: Acceptance and constancy tests — Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode
  • KS C IEC 60601-2-54:2020 Medical electrical equipments — Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • KS D ISO 15632:2012 Microbeam analysis－Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
  • KS M ISO 20847:2006 Petroleum products－Determination of sulfur content of automotive fuels－Energy－dispersive X－ray fluorescence spectrometry
  • KS A ISO 4037-4-2008(2018) X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy－Part 4：Calibration of area and personal dosemeters in l
  • KS A IEC 61525-2003(2013) Radiation protection instrumentation－X, gamma, high energy beta and neutron radiations－Direct reading personal dose equivalent and/or dose equivalent rate monitors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, high energy x-rays and low energy x-rays

  • GB/T 11685-2003 Measurement procedures for semiconductor X-ray detector system and semiconductor X-ray energy spectrometers
  • GB/T 12079-1989 Measurements of the photoelectric properties for X-ray tubes
  • GB/T 12079-2012 Measurements of the photoelectric properties for X-ray tubes
  • GB/T 25184-2010 Verification method for X-ray photoelectron spectrometers
  • GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
  • GB/T 20726-2006 Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
  • GB 16363-1996 Shielding performance and test methods of protection material against X-rays
  • GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
  • GB/T 17723-1999 Surface composition analysis method of gold-plated products by EDX
  • GB/T 17362-2008 Scanning electron microscope X-ray energy spectrum analysis method for gold products
  • GB/T 30704-2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Guidelines for analysis
  • GB/T 17362-1998 Nondestructive method of X-ray EDS analysis with SEM for gold jewelry
  • GB/T 12162.4-2010/ISO 4037 4-2004 X and gamma reference radiation for calibrating dosimeters and dose rate meters and determining their energy response Part 4: Calibration of site and personal dosimeters in low energy X-ray reference radiation fields
  • GB/T 12162.4-2010/ISO 4037 4:2004 X and gamma reference radiation for calibrating dosimeters and dose rate meters and determining their energy response Part 4: Calibration of site and personal dosimeters in low energy X-ray reference radiation fields
  • GB/T 12162.4-2010 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy.Part 4:Calibration of area and personal dosemeters in low energy X reference radiation fields
  • GB/T 17359-1998 General specification of X-ray EDS quantitative analysis for EPMA and SEM
  • GB/T 22571-2008 Surface chemical analysis.X-ray photoelectron spectrometers.Calibration of energy scales
  • GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
  • GB/T 26594-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray tube
  • GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
  • GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
  • GB/T 19042.1-2003 Evaluation and routine testing in medical imaging departments--Part 3-1: Acceptance test--Imaging performance of X-ray equipment for radiographic and radioscopic systems
  • GB/T 7962.10-2010 Test methods of colourless optical glass.Part 10:X-rays stability
  • GB/T 26592-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray apparatus
  • GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
  • GB/T 28892-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Description of seleted instrumental performance parameters
  • GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
  • GB/T 26593-2011 Non-destructive testing instruments.Properties test method for performance of industrial X-ray computed tomography(CT) equipment
  • GB/Z 32490-2016 Procedure for determination of background by X-ray photoelectron spectroscopy for surface chemical analysis
  • GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
  • GB/T 28632-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution
  • GB/T 17040-1997 Petroleum products--Determination of sulfur--Energy-dispersive X-ray fluorescence spectroscopy
  • GB/T 17040-2008 Standard test method for sulfur in petrolem and petroleum products by energy dispersive X-ray fluorescence spectrometry
  • GB/T 28633-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
  • GB/T 17507-1998 General specification of thin biological standards for X-Ray-Ray EDS microanalysis in electron microscope
  • GB/T 20726-2015 Microbeam analysis.Selected instrumental performance parameters for the specification and checking of energy dispersive X-ray spectrometers for use in electron probe microanalysis
  • GB/T 25188-2010 Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy
  • GB/T 2679.11-2008 Paper and board.Qualitative analysis of mineral filler and mineral coating.SEM/EDAX Method
  • GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction
  • GB/T 2679.11-1993 Paper and board. Qualitative analysis of mineral filler and mineral coating. SEM/EDAX method
  • GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
  • GB/T 31470-2015 Standard practice for determination of the specimen area contributing to the detected signal in Auger electron spectrometers and some X-ray photoelectron spectrometers
  • GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
  • GB/T 6609.32-2009 Chemical analysis methods and determination of physical performance of alumina.Part 32:Determination of а-alumina content by X-ray diffraction

German Institute for Standardization, high energy x-rays and low energy x-rays

  • DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
  • DIN ISO 16129:2020 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
  • DIN ISO 15472:2020-05 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
  • DIN EN ISO 13032:2012-06 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012); German version EN ISO 13032:2012
  • DIN EN 60601-2-54:2010 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (IEC 60601-2-54:2009); German version EN 60601-2-54:2009
  • DIN ISO 15472:2020 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
  • DIN EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003); German version EN ISO 8754:2003
  • DIN EN ISO 8754:2003-12 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003); German version EN ISO 8754:2003
  • DIN IEC 62709:2015 Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems (IEC 62709:2014)
  • DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
  • DIN V 6868-55:1996 Image quality assurance in X-ray diagnosis - Part 55 Acceptance testing in direct radiographic and fluoroscopic X-ray-systems including film processing
  • DIN EN ISO 13032:2023-06 Petroleum and related products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO/DIS 13032:2023); German and English version prEN ISO 13032:2023 / Note: Date of issue 202...
  • DIN EN 61331-1:2006 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials (IEC 61331-1:1994); German version EN 61331-1:2002
  • DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
  • DIN EN 61223-3-4:2001 Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000
  • DIN 6857-1:2009 Radiation protection accessories for medical use of X-radiation - Part 1: Determination of shielding properties of unleaded or lead reduced protective clothing
  • DIN 6815:2021-06 Medical X-ray equipment up to 300 kV - Rules for testing of radiation protection after installation, maintenance and essential modification
  • DIN EN IEC 62220-2:2022-11 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging (IEC/CDV 62220-2:2022); German and English version prEN ...
  • DIN EN 61223-3-1:2001 Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999
  • DIN EN 60526:2006-04 High-voltage cable plug and socket connections for medical X-ray equipment (IEC 60526:1978, modified); German version EN 60526:2004
  • DIN EN ISO 20847:2004-07 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004); German version EN ISO 20847:2004
  • DIN EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004); German version EN ISO 20847:2004
  • DIN EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi

International Organization for Standardization (ISO), high energy x-rays and low energy x-rays

  • ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
  • ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
  • ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 15470:2017 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • ISO 16795:2004 Nuclear energy - Determination of Gd<(Index)2>O<(Index))3> content of gadolinium fuel pellets by X-ray fluorescence spectrometry
  • ISO/CD TR 18392:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for determining backgrounds
  • ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
  • ISO 16243:2011 Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
  • ISO/DIS 16795 Nuclear Energy — Determination of Gd2O3 content in pellets containing uranium oxide by X-ray fluorescence spectrometry
  • ISO 14701:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
  • ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
  • ISO 14701:2011 Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness
  • ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
  • ISO/DIS 13032 Petroleum and related products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method
  • ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
  • ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method
  • ISO 15470:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • ISO 4037-4:2019 Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area
  • ISO 15632:2021 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
  • ISO 15632:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • ISO 15632:2002 Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
  • ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
  • ISO 4037:1979/Add 1:1983 X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Addendum 1: High rate series of filtered X-radiation

British Standards Institution (BSI), high energy x-rays and low energy x-rays

  • BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • BS ISO 16129:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • BS EN 60601-2-54:2009 Medical electrical equipment - Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • BS EN 60601-2-54:2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
  • BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
  • BS EN 60601-2-54:2009+A2:2019 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • BS EN 61331-1:2002 Protective devices against diagnostic medical X-radiation - Determination of attenuation properties of materials
  • BS EN 61331-1:2014 Protective devices against diagnostic medical X-radiation. Determination of attenuation properties of materials
  • BS IEC 62709:2014 Radiation protection instrumentation. Security screening of humans. Measuring the imaging performance of X-ray systems
  • BS EN 61223-3-1:1999 Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for radiographic and radiscopic systems
  • BS EN 60526:2005 High-voltage cable plug and socket connections for medical X-ray equipment
  • BS EN 60526:2004 High-voltage cable plug and socket connections for medical X-ray equipment
  • BS EN ISO 13032:2012 Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
  • BS ISO 16243:2011 Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
  • BS ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • BS ISO 10810:2019 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
  • BS EN ISO 8754:2003 Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry
  • BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
  • BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
  • BS EN IEC 62220-2-1:2023 Medical electrical equipment. Characteristics of digital X-ray imaging devices - Determination of dual-energy subtraction efficiency. Detectors used for dual-energy radiographic imaging
  • 17/30362279 DC BS EN 61223-3-6. Evaluation and routine testing in medical imaging departments. Part 3-6. Acceptance and Constancy tests. Imaging performance of mammographic tomosynthesis mode of operation of mammographic X-Ray equipment
  • 18/30381201 DC BS EN 61223-3-6. Evaluation and routine testing in medical imaging departments. Part 3-6. Acceptance and Constancy tests. Imaging performance of mammographic tomosynthesis mode of operation of mammographic X-Ray equipment
  • 19/30354872 DC BS ISO 16795. Nuclear energy. Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry
  • BS IEC 62945:2018 Radiation protection instrumentation. Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
  • 22/30451249 DC BS IEC 62709. Radiation protection instrumentation. Security screening of humans. Measuring the imaging performance of X-ray systems
  • BS ISO 15470:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • BS ISO 15470:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
  • BS ISO 14701:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
  • BS EN 60601-1-3:2008+A1:2013 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Radiation protection in diagnostic X-ray equipment
  • 14/30303362 DC BS ISO/ASTM 51608. Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
  • BS EN 60601-2-63:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
  • BS EN 60601-2-63:2015+A2:2021 Medical electrical equipment - Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
  • BS EN 60601-1-3:2008 Medical electrical equipment -Part 1-3: General requirements for basic safety and essential performance - Collateral Standard - Radiation protection in diagnostic X-ray equipment
  • BS EN 60601-1-3:2008+A2:2021 Medical electrical equipment - General requirements for basic safety and essential performance. Collateral Standard: Radiation protection in diagnostic X-ray equipment
  • 23/30461232 DC BS EN ISO 13032. Petroleum and related products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
  • BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
  • BS EN 60601-2-43:2022 Medical electrical equipment - Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
  • BS EN 60601-2-43:2010+A2:2020 Medical electrical equipment - Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
  • BS EN 60601-2-65:2013+A2:2021 Medical electrical equipment - Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
  • 21/30414431 DC BS IEC 62220-2. Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 2. Determination of dual-energy subtraction efficiency. Detectors used for dual-energy radiographic imaging
  • BS EN ISO 4037-4:2021 Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Calibration of area and personal dosemeters in low energy X reference…
  • BS EN 60601-2-65:2013 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
  • BS EN IEC 60601-2-28:2019 Medical electrical equipment - Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis

Association Francaise de Normalisation, high energy x-rays and low energy x-rays

  • NF S92-502:2006 Medical biology analysis laboratory - Anthroporadiametric - Lungs countings - Measurements of low energy X and gamma emitters (less than 200 keV).
  • NF M60-513:1990 X AND GAMMA REFERENCE RADIATIONS FOR CALIBRATING DOSEMETERS AND DOSE RATEMETERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY. PHOTON REFERENCE RADIATIONS AT ENERGIES BETWEEN 4 MEV AND 9 MEV.
  • NF M60-512:1984 X AND GAMMA REFERENCE RADIATIONS FOR CALIBRATING DOSEMETERS AND DOSE RATEMETERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY.
  • NF S92-502:2013 Laboratory of medical biology - Anthroporadiometric measurements - Lungs - Measurement of X-ray and gamma-ray emissions of energy less than 200 keV
  • NF C74-151*NF EN 61223-3-1:2005 Evaluation and routine testing in medical imaging departments - Part 3-1 : acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems
  • NF M07-053:1995 Petroleum products. Determination of sulfur content. Energy-dispersive-X-ray fluorescence method.
  • NF M62-302:2000 Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation.
  • NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
  • NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
  • NF ISO 16795:2006 Énergie nucléaire - Dosage de Gd2O3 dans des pastilles combustibles au gadolinium par spectrométrie à fluorescence X
  • NF C74-167*NF EN 60601-2-54:2009 Medical electrical equipment - Part 2-54 : particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • NF EN 60526:2005 Raccordements par fiche et réceptacle des câbles haute tension pour équipements à rayons X à usage médical
  • NF M60-460*NF ISO 16795:2006 Nuclear energy - Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry
  • NF M07-053*NF EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
  • NF EN 60601-2-45/A1:2015 Appareils électromédicaux - Partie 2-45 : exigences particulières pour la sécurité de base et les performances essentielles des appareils de mammographie à rayonnement X et des appareils mammographiques stéréotaxiques
  • NF EN 60601-2-45:2011 Appareils électromédicaux - Partie 2-45 : exigences particulières pour la sécurité de base et les performances essentielles des appareils de mammographie à rayonnement X et des appareils mammographiques stéréotaxiques
  • NF M07-145*NF EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method.
  • NF EN 61331-1:2015 Dispositifs de protection radiologique contre les rayonnements X pour diagnostic médical - Partie 1 : détermination des propriétés d'attenuation des matériaux
  • NF X21-073*NF ISO 16243:2012 Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS).
  • NF ISO 16243:2012 Analyse chimique des surfaces - Enregistrement et notification des données en spectroscopie de photoélectrons par rayons X (XPS)
  • NF EN ISO 8754:2003 Produits pétroliers - Détermination de la teneur en soufre - Spectrométrie de fluorescence de rayons X dispersive en énergie
  • NF EN 61223-3-2:2008 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 3-2 : essais d'acceptation - Performance d'imagerie des appareils de mammographie à rayonnement X
  • NF ISO 22127:2020 Dosimétrie avec dosimètres radiophotoluminescents de type verre utilisée pour l'audit dosimétrique en radiothérapie à rayons X de haute énergie
  • NF EN IEC 61223-3-6:2020 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 3-6 : essais d'acceptation et de constance - Performance d'imagerie des appareils de mammographie à rayonnement X utilisés en mode tomosynthèse en mammographie
  • NF EN 60601-2-54/A2:2019 Appareils électromédicaux - Partie 2-54 : exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X utilisés pour la radiographie et la radioscopie
  • NF EN 60601-2-54:2009 Appareils électromédicaux - Partie 2-54 : exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X utilisés pour la radiographie et la radioscopie
  • NF EN 60601-2-54/A1:2015 Appareils électromédicaux - Partie 2-54 : exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X utilisés pour la radiographie et la radioscopie
  • NF C74-228-1:2002 Protective devices against diagnostic medical X-radiation - Part 1 : determination of attenuation properties of materials.
  • NF C74-228-1*NF EN 61331-1:2015 Protective devices against diagnostic medical X-radiation - Part 1 : determination of attenuation properties of materials
  • NF M60-512-2:2000 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 2 : dosimetry for radiation protection over the energy ranges 8 keV to 1,3 MeV and 4 MeV to 9 MeV.
  • NF EN IEC 62220-2-1:2023 Appareils électromédicaux - Caractéristiques des dispositifs d'imagerie à rayonnement X - Partie 2-1 : détermination de l'efficacité de soustraction à double énergie - Détecteurs utilisés en imagerie radiographique à double énergie
  • NF EN ISO 20847:2004 Produits pétroliers - Détermination de la teneur en soufre des carburants pour automobiles - Spectrométrie de fluorescence de rayons X dispersive en énergie
  • NF X21-008:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive ray spectrometers for use in electron probe microanalysis
  • NF M07-110*NF EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
  • NF EN 61223-3-1:2005 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 3-1 : essais d'acceptation - Performance d'imagerie des appareils à rayonnement X pour systèmes radiographiques et radioscopiques
  • NF C74-167/A2*NF EN 60601-2-54/A2:2019 Medical electrical equipment - Part 2-54 : particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • NF C74-167/A1*NF EN 60601-2-54/A1:2015 Medical electrical equipment - Part 2-54 : particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • NF M60-512-3:2000 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 3 : calibration of area and personal dosemeters and the measurement of their response as a function of
  • NF M60-512-4*NF EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calbrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4 : Calibration of area and personal dosemeters in low energy X reference radi

Group Standards of the People's Republic of China, high energy x-rays and low energy x-rays

  • T/ZZB 2794-2022 Intelligent X-ray security inspection system for transmission baggage
  • T/AIA 004-2022 Technical requirements for tire X-ray image vision intelligent detection system
  • T/KJFX 002-2017 Rapid Determination of Cadmium in Rice and Its Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • T/CSIQ 3102-2015 Method for testing the composition of chemical elements in glazes of ceramic works of art Energy dispersive X-ray fluorescence method
  • T/CEC 423-2020 Determination of Sulfur, Phosphorus and Chlorine Content in Mineral Insulating Oils and Lubricating Oils Energy-dispersive X-ray Fluorescence Spectrometry
  • T/LNWTA 003-2019 Determination of elements in the pipe for drinking water —Energy dispersive X-ray fluorescence spertroscopy (EDXRF) method
  • T/FJEMIA 6-2022 Rapid screening of copper, zinc, lead, nickel, chromium and arsenic in soil by portable energy dispersive X-ray fluorescence spectrometry

SE-SIS, high energy x-rays and low energy x-rays

  • SIS SS IEC 463:1983 Nuclear instrumentation - Low energy X or gamma radiation portable exposure r?te meters and monitors for use in radiological protection
  • SIS SS IEC 759:1986 Nuclear instrumentation —Test procedures for semiconductor X-ray energy spectrometers
  • SIS SS-ISO 8963:1990 Dosimetry of X and γ reference radiations for radiation protection over the energy range from 8 keV to 1,3 MeV
  • SIS SS-ISO 8769:1990 Reference sources for the calibration of sur- face contamination monitors — Beta-emit- ters (maximum beta energy greater than 0,15 MeV) and alpha-emitters

中华人民共和国国家卫生和计划生育委员会, high energy x-rays and low energy x-rays

  • GBZ/T 147-2002 Determinaiton of attenuation properties for protective materials against X-rays

Professional Standard - Machinery, high energy x-rays and low energy x-rays

  • JB/T 9402-1999 Performance test method of industrial X-ray flaw detector
  • JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
  • JB/T 11602.3-2013 Non-desturctive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 3: Spectrometric detect

International Electrotechnical Commission (IEC), high energy x-rays and low energy x-rays

  • IEC 61137:1992 Radiation protection instrumentation; installed personnel surface contamination monitoring assemblies; low energy X and gamma emitters
  • IEC 60759:1983 Standard test procedures for semiconductor X-ray energy spectrometers
  • IEC 61223-3-1:1999 Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems
  • IEC 60759:1983/AMD1:1991 Standard test procedures for semiconductor X-ray energy spectrometers; amendment 1
  • IEC 60601-2-35:2020 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2022 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2022 RLV Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60463:1974 Low energy X or gamma radiation portable exposure rate meters and monitors for use in radiological protection
  • IEC 62709:2014 Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems
  • IEC 60526:1978/COR1:2010 High-voltage cable plug and socket connections for medical X-ray equipment; Corrigendum 1
  • IEC 61331-1:2014 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials
  • IEC 61331-1:1994 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials
  • IEC 60601-2-54:2015 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2018 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2009/COR1:2010 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2009/COR2:2011 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2009+AMD1:2015+AMD2:2018 CSV Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 62945:2018 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
  • IEC 60601-2-44:2009 Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
  • IEC 60601-2-54:2009/AMD1:2015 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2009/AMD2:2018 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy; Amendment 2
  • IEC 61283:1995 Radiation protection instrumentation - Direct reading personal dose equivalent (rate) monitors - X, gamma and high energy beta radiation
  • IEC 60601-2-54:2009 IEC 60601-2-54, Ed. 1: Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 60601-2-54:2009+AMD1:2015 CSV Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • IEC 62220-2-1:2023 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging

Professional Standard - Aerospace, high energy x-rays and low energy x-rays

  • QJ 2609-1994 High-energy X-ray flaw detection method for solid rocket motor combustion chamber

National Metrological Technical Specifications of the People's Republic of China, high energy x-rays and low energy x-rays

国家药监局, high energy x-rays and low energy x-rays

  • YY 1650-2019 X-ray image guided radiotherapy equipment performance and test methods
  • YY/T 0724-2021 Special technical conditions for dual-energy X-ray bone densitometer
  • YY/T 0292.1-2020 Medical diagnostic X-ray radiation protective equipment Part 1: Determination of material attenuation properties

工业和信息化部, high energy x-rays and low energy x-rays

  • SJ/T 11586-2016 Test method for 10KeV low-energy X-ray total dose irradiation of semiconductor devices
  • HG/T 6114-2022 Rapid detection method for heavy metals in waste acid: energy-dispersive X-ray fluorescence spectrometry

American National Standards Institute （ANSI), high energy x-rays and low energy x-rays

  • ANSI N42.46-2008 Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
  • ANSI/ASME B89.4.23-2020 X-Ray Computed Tomography (CT) Performance Evaluation
  • ANSI/HPS N43.16-2021 Radiation Safety for Cargo and Vehicle Security Screening Systems Using X-ray or Gamma Radiation, Energies Up to 10 MeV
  • ANSI N43.3-1993 American National Standard for General radiation safety - Installations using Non-Medical X-ray and Sealed Gamma-Ray Sources, Energies Up To 10 MeV
  • ANSI N43.3-2008 General Radiation Safety - Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies Up to 10 MeV
  • ANSI N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems

American Society of Mechanical Engineers (ASME), high energy x-rays and low energy x-rays

Professional Standard - Medicine, high energy x-rays and low energy x-rays

  • YY/T 0724-2009 Particular specifications for dual energy X-ray bone densitometer
  • YY/T 1408-2016 Performance characteristics and test methods of imaging system of single photon emission and X-ray computed tomograph
  • YY/T 0829-2011 Characteristics and test methods for imaging system of positron emission and X-ray computed tomography
  • YY/T 0292.1-1997 Protective devices against diagnostic medical X-radiation—Part 1:Determination of attenuation properties of materials
  • YY 0292.1-1997 Protective devices against diagnostic medical X-radiation.Part 1:Determination of attenuation properties of materials
  • YY 0775-2010 Teleradiotherapy treatment planning system accuracy of dosimetric calculation and test methods for high energy X(γ) beam
  • YY/T 1766.3-2023 Image quality evaluation methods for X-ray computed tomography equipment Part 3: Performance evaluation for dual-energy imaging and energy spectroscopy applications

CZ-CSN, high energy x-rays and low energy x-rays

  • CSN 35 6575 Z1-1997 Standard test procedureds for semiconductor X-ray energy spectrometers
  • CSN 36 4771-1998 High voltage cable plug and socket connections for medical X-ray equipment

Institute of Electrical and Electronics Engineers (IEEE), high energy x-rays and low energy x-rays

  • IEEE 759-1984 Test procedures for semiconductor X-ray energy spectrometers
  • IEEE/ANSI N42.47-2010 American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
  • IEEE N42.47-2010 American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
  • ANSI/IEEE Std 759-1984 IEEE Standard Test Procedures for Semiconductor X-Ray Energy Spectrometers
  • IEEE/ANSI N42.46-2008 American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
  • IEEE STD N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
  • IEEE/ANSI N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
  • IEEE N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
  • IEEE/ANSI N42.55-2013 American National Standard for the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification

American Society for Testing and Materials (ASTM), high energy x-rays and low energy x-rays

  • ASTM E322-96e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
  • ASTM F792-88(1993)e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM F792-01 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM F792-01e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM F792-17 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM F792-17e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM E322-96(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
  • ASTM E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
  • ASTM E996-10(2018) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E996-19 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM F792-01e2 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM C982-88(1997)e1 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
  • ASTM C982-03 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
  • ASTM E2735-14(2020) Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
  • ASTM E902-94(1999) Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
  • ASTM ISO/ASTM 51608-15 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
  • ASTM E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
  • ASTM ISO/ASTM 51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
  • ASTM ISO/ASTM51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
  • ASTM F792-08 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM E995-11 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
  • ASTM E1588-16 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
  • ASTM E1523-97 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
  • ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E1523-15 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
  • ASTM E1695-95(2006)e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
  • ASTM ISO/ASTM51608-15 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
  • ASTM D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM E1588-16a Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
  • ASTM E1588-17 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
  • ASTM D6445-99 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
  • ASTM D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
  • ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM C1255-93(1999) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM C1255-18 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM C1255-93(2005) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM C1255-11 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D6502-99(2003) Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)
  • ASTM D6502-99 Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)
  • ASTM E2108-05 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM E2108-10 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
  • ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
  • ASTM D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • ASTM C1343-96(2007) Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • ASTM C1343-16 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • ASTM E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM D7212-07 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • ASTM D7212-06 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • ASTM D7212-13 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • ASTM D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7751-11 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

Professional Standard - Judicatory, high energy x-rays and low energy x-rays

AENOR, high energy x-rays and low energy x-rays

  • UNE-EN 60601-2-54:2010 Medical electrical equipment -- Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • UNE-EN 60526:2005 High-voltage cable plug and socket connections for medical X-ray equipment
  • UNE-EN 61223-3-1:2000 Evaluation and routine testing in medical imaging departments -- Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems.
  • UNE-EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
  • UNE-EN ISO 8754:2004 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)

Military Standard of the People's Republic of China-General Armament Department, high energy x-rays and low energy x-rays

  • GJB 9763-2020 High-energy X-ray tomography detection method of solid rocket motor combustion chamber
  • GJB 9547-2018 High-energy X-ray photography detection method of large solid rocket motor combustion chamber

Danish Standards Foundation, high energy x-rays and low energy x-rays

  • DS/EN 60601-2-54:2009 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • DS/EN ISO 8754:1995 Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence method
  • DS/EN 60526:2004 High-voltage cable plug and socket connections for medical X-ray equipment
  • DS/EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method
  • DS/EN ISO 8754:2004 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
  • DS/EN ISO 20847:2004 Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
  • DS/EN ISO 4037-4:2021 Radiological protection – X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy – Part 4: Calibration of area and personal dosemeters in low energy X reference radi

European Committee for Electrotechnical Standardization（CENELEC）, high energy x-rays and low energy x-rays

  • FprEN IEC 60601-2-54:2022 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • EN 60613:2010 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
  • EN 61223-3-1:1999 Evaluation and Routine Testing in Medical Imaging Departments - Part 3-1: Acceptance Tests - Imaging Performance of X-Ray Equipment for Radiographic and Radioscopic Systems
  • EN 61331-1:2014 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials
  • EN 61331-1:2002 Protective Devices Against Diagnostic Medical X-Radiation Part 1: Determination of Attenuation Properties of Materials (Remains Current)

IN-BIS, high energy x-rays and low energy x-rays

GB-REG, high energy x-rays and low energy x-rays

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, high energy x-rays and low energy x-rays

  • GB/T 22571-2017 Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales
  • GB/T 36015-2018 Non-destructive testing instruments—Performance and testintg rules of industrial digital X-ray imaging system
  • GB/T 33502-2017 Surface chemical analysis—Recording and reporting data in X-ray photoelectron spectroscopy（XPS）

KR-KS, high energy x-rays and low energy x-rays

  • KS D ISO 15472-2003(2023)
  • KS M ISO 8754-2019 Petroleum products－Determination of sulfur content－Energy dispersive X－ray fluorescence method
  • KS C IEC 60526-2021 High-voltage cable plug and socket connections for medical X-ray equipment
  • KS C IEC 61331-1-2019 Protective devices against diagnostic medical X-radiation — Part 1: Determination of attenuation properties of materials
  • KS C IEC 61223-3-6-2021 Evaluation and routine testing in medical imaging departments —Part 3-6: Acceptance and constancy tests — Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode
  • KS C IEC 60601-2-54-2020 Medical electrical equipments — Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

European Committee for Standardization (CEN), high energy x-rays and low energy x-rays

  • EN 60613:1990 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
  • EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
  • EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)

国家邮政局, high energy x-rays and low energy x-rays

  • YZ/T 0177-2021 Technical requirements for intelligent X-ray security inspection equipment for express mail

Professional Standard - Public Safety Standards, high energy x-rays and low energy x-rays

  • GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
  • GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
  • GA/T 1937-2021 Forensic Science Rubber Inspection Scanning Electron Microscopy/X-ray Spectroscopy
  • GA/T 1939-2021 Forensic Science Current Spot Examination Scanning Electron Microscopy/X-ray Spectroscopy
  • GA/T 1521-2018 Forensic Science Plastics Elemental Composition Examination Scanning Electron Microscopy/X-ray Spectroscopy
  • GA/T 1519-2018 Forensic Science Toner Elemental Composition Inspection Scanning Electron Microscopy/X-ray Spectroscopy
  • GA/T 1520-2018 Forensic science black powder, pyrotechnic powder element composition inspection scanning electron microscope/X-ray energy spectrometry

ES-UNE, high energy x-rays and low energy x-rays

  • UNE-EN 60601-2-54:2010/A1:2015 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • UNE-EN 60601-2-45:2011/A1:2015 Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices (Endorsed by AENOR in November of 2015.)
  • UNE-EN 60601-2-54:2009/A2:2019 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (Endorsed by Asociación Española de Normalización in July of 2019.)
  • UNE-EN 60601-2-45:2011 Medical electrical equipment -- Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices (Endorsed by AENOR in July of 2011.)
  • UNE-EN IEC 62220-2-1:2023 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging (Endorsed by Asociación Española de Normalización i...
  • UNE-EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference r...

未注明发布机构, high energy x-rays and low energy x-rays

  • BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
  • BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution
  • BS IEC 62220-2-1:2023 Medical electrical equipment — Characteristics of digital X - ray imaging devices Part 2 - 1 : Determination of dual - energy subtraction efficiency — Detectors used for dual - energy radiographic imaging

BR-ABNT, high energy x-rays and low energy x-rays

  • ABNT NBR 14533-2011 Petroleum and petroleum products - Determination of sulfur spectrometry X-ray fluorescence (energy dispersive)

Professional Standard - Electron, high energy x-rays and low energy x-rays

  • SJ/T 10458-1993 Standard guide for specimen handling in auger electron spectroscopy and X-ray photoelectron spectroscopy
  • SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
  • SJ/T 11094-1996 Performance parameters and methods of measurement for medical X-ray image intensifier television systems

Lithuanian Standards Office , high energy x-rays and low energy x-rays

  • LST EN 60601-2-54-2009 Medical electrical equipment -- Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (IEC 60601-2-54:2009)
  • LST EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
  • LST EN 61331-1-2014 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials (IEC 61331-1:2014)
  • LST EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
  • LST EN 60526-2005 High-voltage cable plug and socket connections for medical X-ray equipment (IEC 60526:1978, modified)
  • LST EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi

National Metrological Verification Regulations of the People's Republic of China, high energy x-rays and low energy x-rays

  • JJG 2095-2012 Verification Regulation of Measuring Instruments for Air-Kerma of (10~60) kV X-Ray
  • JJG 2043-2010 Verification Scheme of Measuring Instruments for Air-Kerma of (60～250)kV X-Ray

工业和信息化部/国家能源局, high energy x-rays and low energy x-rays

  • JB/T 12962.1-2016 Energy-dispersive X-ray fluorescence spectrometers Part 1: General techniques
  • JB/T 12962.2-2016 Energy dispersive X-ray fluorescence spectrometer Part 2: Elemental analyzers
  • JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer

国家市场监督管理总局、中国国家标准化管理委员会, high energy x-rays and low energy x-rays

  • GB/T 41105.3-2021 Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 3:Spectrometric method
  • GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis
  • GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products—Energy dispersive X-ray fluorescence spectrometry
  • GB/T 40196-2021 Method for analysing CCA and ACQ in preservative-treated wood and wood preservatives by X-ray fluorescence spectroscopy

Professional Standard - Petrochemical Industry, high energy x-rays and low energy x-rays

  • SH/T 0742-2004 Standard test method for sulfur in gasoline by energy-dispersive X-ray fluorescence spectrometry
  • NB/SH/T 0822-2010 Standard test method for determination of phosphorus,sulfur,calcium,and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy

GOSTR, high energy x-rays and low energy x-rays

  • GOST ISO 8754-2013 Petroleum products. Determination of sulfur content by energy-dispersive X-ray fluorescence spectrometry
  • GOST 32139-2019 Petroleum and petroleum products. Determination of sulfur content by energy dispersive X-ray fluorescence spectrometry method
  • PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry
  • GOST ISO 20847-2014 Petroleum products. Determination of sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry

Qinghai Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • DB63/T 1678-2018 Determination of mineral pigments in thangka X-ray fluorescence spectrometry (energy spectroscopy)

Guangdong Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • DB44/T 1826-2016 Determination of Composition of Alloy Jewelry by Energy Dispersive X-ray Fluorescence Spectrometry
  • DB44/T 1216-2013 Characterization of graphene using scanning electron microscopy and X-ray spectroscopy
  • DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy

CENELEC - European Committee for Electrotechnical Standardization, high energy x-rays and low energy x-rays

  • EN 60601-2-54:2009 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (Incorporates Amendment A1: 2015)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., high energy x-rays and low energy x-rays

  • IEEE N42.55-2013 Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification

VN-TCVN, high energy x-rays and low energy x-rays

  • TCVN 3172-2008 Petroleum and petroleum products.Determination of sulfur by energy-dispersive X-ray fluorescence spectrometry

Fujian Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

Shaanxi Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • DB61/T 1162-2018 Determination of Heavy Metal Elements in Soil by Energy Dispersive X-ray Fluorescence Spectrometry
  • DB61/T 1580-2022 Determination of Inorganic Elements in Soils and Sediments Energy Dispersive X-ray Fluorescence Spectrometry

Standard Association of Australia （SAA）, high energy x-rays and low energy x-rays

  • AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • AS 60601.2.54:2018 Medical electrical equipment, Part 2.54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (IEC 60601-2-54:2018 (ED. 1.2), MOD)
  • AS/NZS 4356.7:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the modulation transfer function
  • AS/NZS IEC 60601.1.3:2015
  • AS/NZS 4184.3.2:1998 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of mammographic X-ray equipment
  • AS/NZS IEC 60601.2.28:2015

国家质量监督检验检疫总局, high energy x-rays and low energy x-rays

  • SN/T 4567-2016 Determination of phosphorus and arsenic in industrial yellow phosphorus by energy dispersive X-ray fluorescence spectrometry

Henan Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • DB41/T 1706-2018 Determination of Potassium Content in Compound Fertilizers by Energy Dispersive X-ray Fluorescence Spectrometry
  • DB41/T 1705-2018 Determination of Phosphorus Content in Compound Fertilizers Energy Dispersive X-ray Fluorescence Spectrometry

Professional Standard - Energy, high energy x-rays and low energy x-rays

  • NB/SH/T 6043-2021 Determination of Lead, Iron and Manganese in Gasoline Energy Dispersive X-ray Fluorescence Spectrometry

BE-NBN, high energy x-rays and low energy x-rays

  • NBN-ISO 8754:1993 Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence method
  • NBN-HD 364-1994 High-voltage cable plug and socket connections for medical X-ray equipment

Taiwan Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • CNS 14472-2000 Method of test for sulfur in petroleum products by energy-dispersive X-ray fluorescence spectroscopy

Professional Standard - Electricity, high energy x-rays and low energy x-rays

  • DL/T 1653-2016 Determination of Chlorine Content in Phosphate Refractory Fuels Energy Dispersive X-ray Fluorescence Spectrometry

Yunnan Provincial Standard of the People's Republic of China, high energy x-rays and low energy x-rays

  • DB53/T 423-2012 Determination of Phosphorus, Manganese, Titanium, Chromium, Copper, Vanadium in Ferrophosphorus Energy Dispersive X-ray Fluorescence Spectrometry
  • DB53/T 549-2014 Determination of phosphorus and arsenic content in industrial yellow phosphorus Energy dispersive X-ray fluorescence spectrometry
  • DB53/T 550-2014 Determination of lead, arsenic, cadmium, iron, manganese in calcium hydrogen phosphate energy dispersive X-ray fluorescence spectrometry

Professional Standard - Non-ferrous Metal, high energy x-rays and low energy x-rays

  • YS/T 438.5-2013 Methods for physical performance determination of Sandy alumina.Part 5:X-ray diffraction spectrum method for determination of α-alumina content

Professional Standard - Commodity Inspection, high energy x-rays and low energy x-rays

  • SN/T 3377-2012 Determination of lead in paints.Semiquantitative screening by energy dispersive X-ray fluorescence spectrometric method
  • SN/T 3816-2014 Screening of cobalt,arsenic,chromium,tin,bromine and lead in rubber products.Energy dispersive X-ray fluorescence spectrometric method

Professional Standard - Environmental Protection, high energy x-rays and low energy x-rays

  • HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method

NEMA - National Electrical Manufacturers Association, high energy x-rays and low energy x-rays

  • NEMA XR 7-1979 High-Voltage X-Ray Cables and Receptacles (Revision 1 - January 1980; Revision 2 - October 1987)

Canadian General Standards Board （CGSB), high energy x-rays and low energy x-rays

CH-SNV, high energy x-rays and low energy x-rays

  • SN EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi

IT-UNI, high energy x-rays and low energy x-rays

  • UNI EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi

PL-PKN, high energy x-rays and low energy x-rays

  • PN-EN ISO 4037-4-2021-07 E Radiological protection -- X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 4: Calibration of area and personal dosemeters in low energy X reference ra

  x-rays and high-energy electron beams, x-ray low energy high energy, high energy x-rays and low energy x-rays, low-energy x-rays and high-energy x-rays.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved