ZH
RU
ES

Test duplicates

Test duplicates, Total:494 items.

In the international standard classification, Test duplicates involves: Machine tools, Screw threads, Quality, Reinforced plastics, Wood, sawlogs and sawn timber, Aids for disabled or handicapped persons, Products of the textile industry, Fasteners, Welding, brazing and soldering, Testing of metals, Iron and steel products, Cycles, Industrial automation systems, Pulps, Non-destructive testing, Electronic components in general, Food products in general, Edible oils and fats. Oilseeds, Vocabularies, Rubber, Sports equipment and facilities, Packaging materials and accessories, Linear and angular measurements, Mechanical testing, Analytical chemistry, Fluid storage devices, Optical equipment, Tobacco, tobacco products and related equipment, Animal feeding stuffs, Fertilizers, Cereals, pulses and derived products, Fuels, Lifting equipment, Wood-based panels, Non-metalliferous minerals, Tea. Coffee. Cocoa, Pumps, Sugar. Sugar products. Starch, Pipeline components and pipelines, Gears, Company organization and management, Ferroalloys, Construction materials, Leather technology, Electrical and electronic testing, Diagnostic, maintenance and test equipment, Shafts and couplings, Paper and board, Test conditions and procedures in general, Textile auxiliary materials, Raw materials for rubber and plastics, Packaging and distribution of goods in general, Farming and forestry, Waxes, bituminous materials and other petroleum products, Fruits. Vegetables, Safety of machinery, Road engineering, Paints and varnishes, Paint ingredients, Earthworks. Excavations. Foundation construction. Underground works, Metalliferous minerals, Woodworking equipment, Information technology (IT) in general, General methods of tests and analysis for food products, Refractories, Terminology (principles and coordination), Protection against fire, Plant and equipment for the food industry, Microbiology, Services, Coals, Natural gas, Characteristics and design of machines, apparatus, equipment, Milk and milk products, Textile fibres, Graphic technology, Adhesives, Mining equipment, Kitchen equipment, Products of non-ferrous metals, Mining and quarrying.

RU-GOST R, Test duplicates

GOST 25889.2-1983 Metal-cutting machine tools. Methods of checking specimen two flat surfaces for parallelism
GOST 26189-1984 Metal-cutting machine tools. Methods of complex checking two specimen flat surfaces for parallelism and straigntness
GOST R 55642-2013 Lifting platforms for persons with impaired mobility. Rules and methods of examinations (tests) and measurements. Rules of sampling
GOST R ISO 15330-2010 Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
GOST 25889.3-1983 Metal-cutting machine tools. Methods of checking specimen two flat surfaces for squareness
GOST 28588.2-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 2. Chemical tests
GOST R 50779.71-1999 Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
GOST 28588.1-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 1. Physical tests
GOST 9980.2-2014 Paint materials and raw materials for them. Sampling, examination and preparation of test samples
GOST 20736-1975 Quality control. Sampling inspection by variables for normal distribution of inspected parameters
GOST R ISO 2859-3-2009 Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures
GOST R ISO 2859-1-2007 Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

Taiwan Provincial Standard of the People's Republic of China, Test duplicates

CNS 12754-1990 Method of Test for Parallel Screw Gauges
CNS 10734-1984 Method of Test for the Plastic Rims of Bicycle
CNS 11470-1985 Method of Test for Balancing Beams
CNS 8170-1994 Method of Test for Flat Pallets
CNS 5653-1980 Method of Test for Level Gauge
CNS 14422-2000 Method of test for cigarettes--Sampling
CNS 2770-1-1986 Method of Test for Feeds : Sampling
CNS 6500-1980 Method of Test for Fertilizers: Sampling
CNS 13476-1995 Method of Test for Grains - Sampling
CNS 2770.1-1986 Method of Test for Feeds : Sampling
CNS 7293-1981 Sampling of Cocoa Beans
CNS 2779-1994 Sampling Procedure and Tables for Inspection by Attributes
CNS 9445-1987 Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming
CNS 10899-1984 Method of Test for Flat Quick-Connect Terminals
CNS 970-1996 Method of Test for Canned Food-Sampling
CNS 10230-1995 Test Code for Accuracy of Slicers
CNS 2770-2-1986 Method of Test for Feeds : Preparation of Test Samples
CNS 2770.2-1986 Method of Test for Feeds : Preparation of Test Samples
CNS 11638-1986 Method of Inspection for Dimension of Refractory Bricks
CNS 10791-1995 Test Code for Performance of Slicers
CNS 474-1988 Method of Test for Flat Asbestos Cement Sheet
CNS 1272-1981 Method of Test for Leather (General Rule and Sampling Method)
CNS 12052-1987 Method of Test for Metal Water Canteen
CNS 5656-1992 Method of test for infant bicycles

Danish Standards Foundation, Test duplicates

DS 2184:1982 Sampling procedures and tables for inspection by attributes
DS/ISO 8422:1992 Sequential sampling plans for inspection by attributes
DS/ISO 8422/Cor.1:1993 Sequential sampling plans for inspection by attributes-Technical Corrigendum 1
DS/EN ISO 15330:2000 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
DS/EN ISO 15626:2013 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
DS/ISO 2859-1:1992 Sampling procedures for inspection by attributes. Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
DS/ISO 2859-2:1992 Sampling procedures for inspection by attributes. Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
DS/ISO 2859-4:2003 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
DS/ISO 2859-10:2007 Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
DS/ISO 2859-1/Cor.1:1993 Sampling procedures for inspection by attributes - Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection -Technical Corrigendum 1
Standardpakke Stikproeveplaner 2-2008 Standards package - Acceptance sampling plans - Inspection by attributes
Standardpakke Stikproeveplaner 3-2008 Standards package - Acceptance sampling plans - Inspection by variables
DS/EN 326-3:2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
DS/ISO 2859-1/Amd 1:2011 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
DS/ISO 2859-3:1992 Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures

IT-UNI, Test duplicates

UNI 5805-1966
UNI ISO 2859-4:2021 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels

AENOR, Test duplicates

UNE-ISO 1708:2012 Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy
UNE-ISO 2859-4:2013 Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels
UNE-ISO 2859-10:2013 Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
UNE-EN ISO 15626:2013 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2011)
UNE 88001:2005 Products in fibrecement. Sampling and inspection.
UNE-EN 326-3:2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
UNE-ISO 2859-1:2012 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test duplicates

GB/T 8052-2002 Single and multi-level continuous sampling procedures and tables for inspection by attributes
GB/T 8054-1995 Single sampling procedures and tables for inspection having desired operating characteristics by variables for mean value
GB/T 14900-1994 Single sampling procedures and tables for product quality audit by variableg for mean value
GB/T 13393-2008 Guide to acceptance sampling inspection
GB 5491-1985 Inspection of grain and oilseeds--Methods for sampling and sample reduction
GB/T 5524-1985 Inspection of vegetable oils--Methods for sampling and sample reduction
GB/T 7660.3-2013 Reflecting prisms.Part 3:Optical parallelism and test method
GB/T 22555-2010 Acceptance sampling plans and procedures for the inspection of bulk materials
GB/T 2828.4-2008 Sampling procedures for inspection by attributes.Part 4:Procedures for assessment of declared quality levels
GB/Z 18620.3-2008 Cylindrical gears.Code of inspection practice.Part 3:Recommendations relative to gear blanks,shaft centre distance and parallelism of axes
GB/T 28529-2012 Platform brake tester
GB/T 20731-2006 Verification of wheel balancing machines
GB/T 15172-1994 The sampling inspection for transport packages
GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2828.2-2008 Inspection procedures by count sampling - part 2 : sampling plans for isolated lot inspection retrieved by limit quality LQ
GB/T 15239-1994 Sampling procedures and tables for isolated lot inspection by attributes
GB/T 3098.17-2000 Mechanical Properties of fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearing surface method
GB/T 2930.1-2001 Rules for forage seed testing-Sampling
GB/T 30642-2014 General guidelines for food sampling inspection
GB/T 8051-2008 Sequential sampling plans for inspection by attributes
GB 4789.14-1984 Microbiological examination of food hygiene--Examination of bacillus cereus
GB 4789.14-1994 Microbiological examination of food hygiene.Examination of Bacillus cereus
GB/T 4789.14-2003 Microbiological examination of food hygiene Examination of Bacillus cereus
GB/T 2828.11-2008 Inspection procedures for count sampling - Part 11: Procedures for assessing the level of claimed quality in small populations
GB/T 2828.10-2010 Sampling procedures for inspection by attributes.Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
GB/T 2828.5-2011 Sampling procedures for inspection by attributes.Part 5 ： System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 6378.4-2018 Sampling procedures for inspection by variables.Part 4:Procedures for assessment of declared quality levels for mean
GB/T 6378.4-2008 Sampling procedures for inspection by variables.Part4:Procedures for assessment of declared quality levels for mean
GB/T 18249-2000 Ferroalloys-Experimental methods for checking the bias of sampling and sample preparation
GB/T 42864-2023 Sampling facilities and sampling performance inspection of liquefied natural gas
GB/T 3543.2-1995 Rules for agricultural seed testing--Sampling
GB/T 10325-2012 Shaped refractory produts.Rule of acceptance,sampling and inspection
GB/T 25943-2010 Aluminium ores.Experimental methods for checking the precision of sampling
GB/T 2828.3-2008 Sampling procedures for inspection by attributes.Part3:Skip-lot sampling procedures

German Institute for Standardization, Test duplicates

DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
DIN 52185:1976 Testing of wood; compression test parallel to grain
DIN 32525-4:1985 Testing of filler metals by means of weld metal specimens; test piece for determining the hardness for surfacing
DIN EN 1711:2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis; German version EN 1711:2000
DIN EN 27213:1993 Pulps; sampling for testing (ISO 7213:1981); German version EN 27213:1993
DIN 876-2:1984 Surface plates; cast iron surface plates, requirements and testing
DIN EN ISO 15330:2000 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999
DIN EN ISO 15626:2018-11 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018); German version EN ISO 15626:2018
DIN 51701-5:2008 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN 52376:1978 Testing of plywood; determination of compression strength parallel to the surfaces
DIN 52376:2016 Testing of plywood - Determination of compression strength parallel to the surfaces
DIN EN ISO 15330:2000-01 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999
DIN 53442:1990-09 Flexural fatique testing of plastics using flat specimens
DIN CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination; German version CEN/TS 15053:2005
DIN 876-1:1984 Surface plates; natural hard rock surface plates; requirements and testing
DIN ISO 2859-2:1993 Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985
DIN 1996-3:1990 Testing of asphalt; sample preparation
DIN 51610:1983 Testing of liquefied petroleum gases; sampling
DIN 55437-1:1992 Testing of board; testing of creasings; laboratory producing of test creasings
DIN EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015); German version EN ISO 17643:2015
DIN EN ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018)
DIN EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
DIN EN ISO 23277:2015-06 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015); German version EN ISO 23277:2015
DIN EN ISO 23278:2015-06 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015); German version EN ISO 23278:2015
DIN ISO 2859-1:2014 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English
DIN ISO 2859-1:2004 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 including Technical Corrigendum 1:2001)
DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
DIN ISO 2859-1:2014-08 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English
DIN 52185:1976-09 Testing of wood; compression test parallel to grain

Indonesia Standards, Test duplicates

SNI 08-0616-1989 Single sample inspection for bulk acceptance by variable
SNI 04-1994-1990 Sampling method of test specimens
SNI 04-1931-1990 Planning and procedure for sampling to inspection of goods

RO-ASRO, Test duplicates

STAS 3160/2-1984 A QL sampllng inspection SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
STAS 3160/1-1984 AQL sampling inispeetion A GUIDE TO THE USE OF THE SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES AND VAIUABLES
STAS 12030/5-1986 Metal cutting machine tools TEST PIECES Checking methods for paralielism of two plat surfaces
STAS R 3160/4-1989 Sampling procedures for irr.pection by attributes SAMPLING PLANS INDEXED BY LLMITING QUALITY (LQ) FOR ISOLATED LOT INSPECTION
STAS SR ISO 3086:1995 Iron ores. Experimental methods for checking the bias sampting
STAS 86-1967

International Organization for Standardization (ISO), Test duplicates

ISO 2859-1:1989 Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
ISO 2859-3:2005 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
ISO 2859-3:1991 Sampling procedures for inspection by attributes; part 3: skip-lot sampling procedures
ISO 2859-1:1989/Cor 1:1993 Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection — Technical Corrigendum 1
ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
ISO 18893:2004 Mobile elevating work platforms - Safety principles, inspection, maintenance and operation
ISO 18893:2014 Mobile elevating work platforms - Safety principles, inspection, maintenance and operation
ISO 9498:1993 Fluorspar; experimental methods for checking the bias of sampling and sample preparation
ISO 3951-4:2011 Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels
ISO/TS 22809:2007 Non-destructive testing - Discontinuities in specimens for use in qualification examinations
ISO 28596:2022 Sampling procedures for inspection by attributes — Two-stage sampling plans for auditing and for inspection under prior information
ISO 2859-2:2020 Sampling procedures for inspection by attributes — Two-stage sampling plans for auditing and for inspection under prior information
ISO 15245-2:2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection
ISO/TR 2630:1978 Rubbers, raw — Sampling for inspection by variables
ISO 7347:1987 Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation
ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
ISO 3085:1986 Iron ores; Experimental methods for checking the precision of sampling
ISO 3086:1986 Iron ores; Experimental methods for checking the bias of sampling
ISO 3085:1996 Iron ores - Experimental methods for checking the precision of sampling
ISO 2859-2:1985 Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 28590:2017 Sampling procedures for inspection by attributes - Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 8541:1986 Manganese and chromium ores; Experimental methods for checking the bias of sampling and sample preparation
ISO 1985:2015 Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
ISO 390:1977 Asbestos-cement products — Sampling and inspection
ISO 8422:2006 Sequential sampling plans for inspection by attributes
ISO 5538:2004 Milk and milk products - Sampling - Inspection by attributes
ISO 8422:1991 Sequential sampling plans for inspection by attributes
ISO 5538:1987 Milk and milk products; Sampling; Inspection by attributes
ISO 8197:1988 Milk and milk products; sampling; inspection by variables
ISO 28591:2017 Sequential sampling plans for inspection by attributes
ISO 5538:2004 | IDF 113:2004 Milk and milk products — Sampling — Inspection by attributes
ISO 5538:2004|IDF 113:2004 Sampling and counting inspection of milk and dairy products
ISO 3085:1975 Iron ores — Experimental methods for checking the precision of sampling
ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 3086:1974 Iron ores — Experimental methods for checking the bias of sampling
ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 2859-5:2005 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection

CZ-CSN, Test duplicates

CSN 01 0254-1974 Sampling inspection by attributes
CSN 01 0258-1981 Sainpling inspection by variables
CSN 01 0260-1988 Sampling inspection by attributes. Single sampling plans with acceptance number zero
CSN 01 0259-1980 Sampling inspection by attributes. Sequential sampling plans
CSN 79 3805-1985 Testing of furs. Sampling and conditioning of the test pieces and furs
CSN 34 7010 Cast.01-1973 Checking by inspection
CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification

Association Francaise de Normalisation, Test duplicates

NF A89-530:2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis.
NF A89-530/A1:2004 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis.
NF A04-306*NF EN 10306:2002 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.
NF EN ISO 15330:1999 Éléments de fixation - Essai de précharge pour la détection de la fragilisation par l'hydrogène - Méthode des plaques parallèles
NF ISO 2859-5:2005 Règles d'échantillonnage pour les contrôles par attributs - Partie 5 : systèmes de plans d'échantillonnage progressif pour le contrôle lot par lot, indexés d'après la limite d'acceptation de qualité (LAQ)
NF ISO 2859-2:2021 Règles d'échantillonnage pour les contrôles par attributs - Partie 2 : plans d'échantillonnage pour les contrôles de lots isolés, indexés d'après la qualité limite (QL)
NF A89-530*NF EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis
NF X06-022-3*NF ISO 2859-3:2005 Sampling procedures for inspection by attributes - Part 3 : skip-lot sampling procedures
NF E25-010*NF EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method.
NF A89-516*NF EN ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
NF X06-022*NF ISO 28590:2017 Sampling procedures for inspection by attributes - Introduction to the ISO 2859 series of standard for sampling for inspection by attributes
NF X06-022-4:2003 Sampling procedures for inspection by attributes - Part 4 : procedures for assessment of declared quality levels.
NF A04-306:1988 IRON AND STEEL. ULTRASONIC TESTING OF BROAD FLANGED BEAMS WITH PARALLEL FLANGES AND IPE BEAMS.
NF X06-022-1*NF ISO 2859-1:2000 Sampling procedures for inspection by attributes - Part 1 : sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection.
NF X06-022-4*NF ISO 2859-4:2020 Sampling procedures for inspection by attributes - Part 4 : procedures for assessment of declared quality levels
NF X06-022:1991 APPLICATION OF STATISTICS. SELECTION OF SAMPLING PLANS FOR CONTROL BY COUNTING THE PROPORTION OF NON-CONFORMING ITEMS AND AVERAGE NUMBER OF NON-CONFORMITIES ITEMS PER UNIT.
NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
NF B40-202:1982 Shaped refractory products. Sampling and acceptance testing.
NF E29-686-2*NF EN ISO 15245-2:2002 Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2 : Gauge inspection.
NF EN ISO 15626:2018 Essais non destructifs des assemblages soudés - Technique de diffraction des temps de vol (méthode TOFD) - Niveaux d'acceptation
NF T76-092*NF EN 1067:2006 Adhesives - Examination and preparation of samples for testing
NF V04-145*NF ISO 5538:2008 Milk and milk products - Sampling - Inspection by attributes
NF V04-145:1988 Milk and milk products. Sampling. Inspection by attributes.
NF P14-204-1*NF EN 13892-1:2003 Methods of test for screed materials - Part 1 : sampling, making and curing specimens for test.
NF X06-022-5*NF ISO 2859-5:2005 Sampling procedures for inspection by attributes - Part 5 : system of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection.
NF A89-521:1997 Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.
NF P94-510-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1 : technical principles for execution.
NF A89-551*NF EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
NF A89-541*NF EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels
NF X06-022:2000 Sampling procedures for inspection by attributes - Part 2 : sampling plans indexed by limiting quality (LQ) for isolated lot inspection
NF X06-022-2*NF ISO 2859-2:2021 Sampling procedures for inspection by attributes - Part 2 : sampling plans indexed by limiting quality (LQ) for isolated lot inspection

National Metrological Verification Regulations of the People's Republic of China, Test duplicates

JJG(轻工) 33-1989 Verification regulations for special samples for bicycle testing
JJG 46-1976 Trial Verification Regulations for Torque Balance
JJG 465-1986 Verification Regulation of Spherometer Special-Gauge
JJG 98-1990 Verification Regulation of Non-automatic Balance
JJG 828-1993 Verification Regulation of Laser Measuring Instrument for Paralleism of Micrometer
JJG(交通) 019-1999 Verification Regulation of Wheel Dynamic Balancer's Aligner Rotator
JJG(电子) 11004-1988 620kHz~18.6MHz Level Oscillator Trial Verification Regulations
JJG(电子) 18002-1987 2307 Type Level Recorder Trial Verification Regulations
JJG(电子) 11007-1988 620kHz~18.6MHz frequency selection level meter trial implementation verification regulations
JJG 354-1984 Verification Regulation of Standard Sample of the Magnetic Properties of Soft Magnetic Materials
JJG 405-1986 Verification Regulation of the Standard Specimen of Magnetic Sheet and Strip
JJG 406-1986 Verification Regulation for Standard Sample of Feebly Megnetic Materials
JJG 407-1986 Verification Regulation of the Standard Specimen of Electrical Iron
JJG(电子) 03005-1988 SQ-27 Sampling Oscilloscope Trial Verification Rules
JJG 1020-2017 Platform Brake Testers
JJG 1020-2007 Verification Regation of Platform Brake Tester
JJG(化工) 107-1991 Verification Regulations for Rubber Parallel Plate (Williams Type) Plastometer
JJG(电子) 11002-1988 Trial Verification Regulations for Low Frequency Level Oscillators Below 620kHz
JJG(电子) 11006-1988 Trial verification regulations for low-frequency frequency-selective level meters below 620kHz
JJG 352-1984 Verification Regulation of Standard Sample of The Magnetic Properties of Permanent Magnet Materials

HU-MSZT, Test duplicates

Professional Standard - Electron, Test duplicates

SJ 20712-1998 Single-and multi-level continuous sampling procedures and tables for inspection by attributes
SJ/Z 3206.9-1989 Methods for inspection of standard samples or sample uniformity

British Standards Institution (BSI), Test duplicates

BS ISO 3951-4:2011 Sampling procedures for inspection by variables. Procedures for assessment of declared quality levels
21/30409828 DC BS ISO 28596. Sampling procedures for inspection by attributes. Two-stage sampling plans for auditing and for inspection under prior information
BS 84:2007 Parallel screw threads of Whitworth form – Requirements
BS ISO 28596:2022 Sampling procedures for inspection by attributes. Two-stage sampling plans for auditing and for inspection under prior information
BS EN ISO 3452-3:1999 Non-destructive testing - Penetrant testing - Reference test blocks
BS ISO 2859-4:2020 Sampling procedures for inspection by attributes - Procedures for assessment of declared quality levels
BS EN ISO 15245-2:2001 Gas cylinders. Parallel threads for connection of valves to gas cylinders. Gauge inspection
BS EN ISO 15626:2013 Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
BS EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
BS 6002-4:2006 Sampling procedures for inspection by variables. Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
BS 6001-1:1999 Sampling procedures for inspection by attributes - Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS EN 13892-1:2002 Methods of test for screed materials - Sampling, making and curing specimens for test
BS EN 1883:1999 Feather and down - Sampling in view of tests
BS EN 1883:2018 Feather and down. Sampling in view of tests
BS DD CEN ISO/TS 22476-11:2006 Geotechnical investigation and testing - Field testing - Flat dilatometer test
BS EN 1712:1997 Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS 6001-3:2005 Sampling procedures for inspection by attributes - Specification for skip-lot sampling procedures
BS ISO 3951-1:2022 Tracked Changes. Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS DD CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
BS EN 12504-1:2009 Testing concrete in structures Part 1: Cored specimens — Taking, examining and testing in compression
BS EN 12504-1:2019(2020) Testing concrete in structures Part 1: Cored specimens — Taking, examining and testing in compression
BS 6002-2:2007 Sampling procedures for inspection by variables - General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS ISO 28590:2017*BS 6001-0:2017 Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
BS ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
BS ISO 8422:2007 Sequential sampling plans for inspection by attributes
BS EN 1067:2005 Adhesives - Examination and preparation of samples for testing
BS ISO 5538:2004 Milk and milk products - Sampling - Inspection by attributes
BS ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
BS 6001-2:1993 Sampling procedures for inspection by attributes - Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection

American Gear Manufacturers Association, Test duplicates

AGMA 915-3-A99-1999 Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism
AGMA 915-3A-1999 Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism

未注明发布机构, Test duplicates

BS EN ISO 15330:1999(2000) Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
BS ISO 8422:2006(2007) Sequential sampling plans for inspection by attributes
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test duplicates

GB/T 36011-2018 Sampling check and routine test method for programmable controller
GB/T 2930.1-2017 Rules of seed testing for forage, turfgrass and other herbaceous plant—Sampling
GB/T 33885-2017 Non-destructive testing instruments—General requirements for sampling,routine inspection and type inspection
GB/T 17617-2018 Rule of sampling and inspection for refractory raw materials

U.S. Military Regulations and Norms, Test duplicates

ARMY MIL-STD-650 REINST NOTICE 6-1996 EXPLOSIVE SAMPLING, INSPECTION TESTING
ARMY MIL-STD-650 NOTICE 3-1973 EXPLOSIVE SAMPLING, INSPECTION TESTING
ARMY MIL-STD-286 C CHG NOTICE 2-2010 PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING

KR-KS, Test duplicates

KS B ISO 15330-2017 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 15626-2019 Non-destructive testing of welds — Time-of-flight diffraction technique(TOFD) — Acceptance levels
KS Q ISO 3951-3-A-2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS Q ISO 28590-2019 Sampling procedures for inspection by attributes —Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
KS D ISO 7347-2003(2023) Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
KS Q ISO 3951-3-2012 Sampling procedures for inspection by variables－Part 3：Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS Q ISO 2859-10-2014 Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
KS H ISO 5538-2021 Milk and milk products — Sampling — Inspection by attributes
KS Q ISO 3951-2-2019 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality char
KS E ISO 8541-2018(2023) Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
KS B ISO 1708-2022 Acceptance conditions for general purpose parallel lathes — Testing of the accuracy

BE-NBN, Test duplicates

NBN-ISO 2859-1:1993 Sampling procedures for inspection by attributes. Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
NBN-ISO 2859-3:1993 Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures
NBN-ISO 2859-2:1993 Sampling procedures for inspection by attributes. Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
NBN B 22-001-1978

American National Standards Institute （ANSI), Test duplicates

ANSI/EIA 585:1991 Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
ANSI/EIA 584:1991 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
ANSI/ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

NL-NEN, Test duplicates

NEN-ISO 2244:1993 Packaging. Complete, filled transport packages. Horizontalimpact tests (horizontal or inclined plane test. Pendulum test) (ISO 2244:1985)
NEN 6559-1981 Bacteriologicai examination of water - Sampling
NEN-ISO 4884:1993 Hardmetals. Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
NEN 6801-1986 Dried milk- Sampling for physical and chemical examination
NEN-EN 196-7-1993 Methods of testing cement. Methods of taking and preparing samples of cement

国家标准局, Test duplicates

GB/T 5491-1985 Inspection of grain and oilseeds--Methodsfor sampling and sample reduction

Defense Logistics Agency, Test duplicates

DLA A-A-50060 C-2012 BALANCES, TRIP, LABORATORY

Henan Provincial Standard of the People's Republic of China, Test duplicates

DB4102/T 015-2020 Inspection and testing sampling management rules
DB4105/T 178-2021 Specifications for sample management of inspection and testing institutions
DB4106/T 3-2019 Sampling method for animal epidemic laboratory inspection

Korean Agency for Technology and Standards (KATS), Test duplicates

KS Q ISO 2859-3:2010 Sampling procedures for inspection by attributes-Part 3:Skip-lot sampling procedures
KS Q ISO 2859-3:2014 Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
KS B ISO 15330-2017(2022) Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 15626:2019 Non-destructive testing of welds — Time-of-flight diffraction technique(TOFD) — Acceptance levels
KS Q ISO 10725:2009 Acceptance sampling plans and procedures for the inspection of bulk materials
KS Q ISO 10725:2016 Acceptance sampling plans and procedures for the inspection of bulk materials
KS A ISO 2859-0:2009 Sampling procedures for inspection by attributes－Part 0：Introduction to the KS A ISO 2859 attribute sampling system
KS Q ISO 3951-4:2014 Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
KS B ISO 18893:2005 Mobile elevating work platforms-Safety principles, inspection, maintenance and operation
KS B ISO 18893:2013 Mobile elevating work platforms－Safety principles, inspection, maintenance and operation
KS B ISO 18893:2016 Mobile elevating work platforms — Safety principles,inspection, maintenance and operation
KS Q ISO 3951-3-A:2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS Q 3951-2013 Sampling procedures for inspection by variables
KS Q ISO 28590:2019 Sampling procedures for inspection by attributes —Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
KS B ISO 15330:2001 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 15245-2:2005 Gas cylinders-Parallel threads for connection of valve to gas cylinders-Part 2:Gauge inspection
KS B ISO 15245-2:2015 Gas cylinders－Parallel threads for connection of valve to gas cylinders－Part 2：Gauge inspection
KS B ISO 15330:2017 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS D ISO 7347-2003(2018) Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
KS Q ISO 3951-4-2014(2019) Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
KS A IEC 60410-2006(2017) Sampling plans and procedures for inspection by attributes
KS B ISO 15245-2-2015(2020) Gas cylinders－Parallel threads for connection of valve to gas cylinders－Part 2：Gauge inspection
KS D ISO 7347:2003 Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
KS E ISO 3085-2003(2018) Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS A 3101-1981(2001) GENERAL RULES FOR SAMPLING INSPECTION PROCEDURES
KS A 3101-1986 GENERAL RULES FOR SAMPLING INSPECTION PROCEDURES
KS E ISO 3086:2010 Iron ores-Experimental methods for checking the bias of sampling
KS E ISO 10277-2003(2019) Aluminium ores－Experimental methods for checking the precision of sampling
KS E ISO 10836:2003 Iron ores－Method of sampling and sample preparation for physical testing
KS Q ISO 8422:2009 Sequential sampling plans for inspection by attributes
KS H ISO 5538:2006 Milk and milk products－Sampling－Inspection by attributes
KS H ISO 8197:2006 Milk and milk products－Sampling－Inspection by variables
KS H ISO 5538:2021 Milk and milk products — Sampling — Inspection by attributes
KS M ISO 4707-2004(2014) Cork－Stoppers－Sampling for inspection of dimensional characteristics
KS H ISO 5538-2006(2016) Milk and milk products－Sampling－Inspection by attributes
KS A IEC 60410-2006(2022) Sampling plans and procedures for inspection by attributes
KS Q ISO 8422:2015 Sequential sampling plans for inspection by attributes
KS E ISO 3085:2003 Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS E ISO 10277:2003 Aluminium ores－Experimental methods for checking the precision of sampling
KS E ISO 10226-2003(2017) Aluminium ores－Experimental methods for checking the bias of sampling
KS E ISO 3086-2010(2020) Iron ores－Experimental methods for checking the bias of sampling
KS E ISO 10226-2003(2022) Aluminium ores－Experimental methods for checking the bias of sampling
KS Q ISO 2859-1:2010 Sampling procedures for inspection by attributes-Part 1:Sampling plans indexed by acceptable quality level(AQL) for lot-by-lot inspection
KS Q ISO 2859-5:2010 Sampling procedures for inspection by attributes-Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS Q ISO 2859-5:2014 Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS Q ISO 2859-1:2014 Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS Q ISO 3951-2:2019 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality char

Association of German Mechanical Engineers, Test duplicates

VDI/VDE/DGQ 2618 Blatt 6.1-2009 Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels
VDI/VDE/DGQ 2618 Blatt 4.4-2009 Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers

American Society for Testing and Materials (ASTM), Test duplicates

ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

VN-TCVN, Test duplicates

TCVN 5220-1990 Metal cutting machines.Methods of parallelism inspection of the axis to plane
TCVN 7790-4-2008 Sampling procedures for inspection by attributes.Part 4: Procedures for assessment of declared quality levels
TCVN 7790-1-2007 Sampling procedures for inspection by attributes.Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
TCVN 7790-5-2008 Sampling procedures for inspection by attributes.Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
TCVN 6266-2007 Milk and milk products.Sampling.Inspection by attributes
TCVN 6267-1997 Milk and milk products.Sampling.Inspection by variables
TCVN 6804-2001 Aluminium ores.Experimental methods for checking the precision of sampling
TCVN 6805-2001 Aluminium ores.Experimental methods for checking the bias of sampling
TCVN 7790-10-2008 Sampling procedures for inspection by attributes.Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
TCVN 7790-3-2008 Sampling procedures for inspection by attributes.Part 3: Skip-lot sampling procedures

TH-TISI, Test duplicates

TIS 2444-2009 Fasteners.preloading test for the detection of hydrogen embrittlement.parallel bearing surface method
TIS 465.1-2011 Sampling procedures for inspection by attributes.part 1: sampling schemes indexed by acceptance quality limit (aql) for lot-by-lot inspection

ES-UNE, Test duplicates

UNE-EN ISO 15626:2019 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018)
UNE-EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
UNE-EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)

PT-IPQ, Test duplicates

NP 3187-1987 Pulps Sampling for testing
NP 27-1989 Paper and board Conditioning of samples
NP EN 326-3-2002 Wood-based panels Sampling,cutting and inspection Part 3:Inspection of a consignment of panels

AT-ON, Test duplicates

ONORM A 6649-1983 Sampling procedures and tables for inspection by attributes

SE-SIS, Test duplicates

SIS SS 11 03 21-1983 Impact test - Charpy impact testing machines - Indirect verification using unnotched test pieces

ZA-SANS, Test duplicates

SANS 18893:2007 Mobile elevating work platforms - Safety principles, inspection, maintenance and operation
SANS 3452-3:1998 Non-destructive testing - Penetrant testing Part 3: Reference test blocks
SANS 2859-1:2004 Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
SANS 3951-3:2008 Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

Lithuanian Standards Office , Test duplicates

LST EN 15617-2009 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
LST EN ISO 15330:2001 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
LST EN 326-3-2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels

CEN - European Committee for Standardization, Test duplicates

EN 15617:2009 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
EN ISO 15245-2:2001 Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 2: Gauge Inspection

Professional Standard - Military and Civilian Products, Test duplicates

WJ 2682-2007 Specification for multi-tube parallelism detector for artillery

Professional Standard - Aviation, Test duplicates

HB 2083-1989 Inspection platform (L=200~800mm)
HB 2083-1974 Inspection platform (L=200~800mm)
HB 2243-1976 Sample and proofreading sample inspection HB 2245-76 slot milling cutter
HB 2242-1976 Sample and proofreading sample inspection HB 2244-76 slot milling cutter
HB 2445-1979 Sample and proofreading sample inspection HB 2444-79 slot milling cutter
HB 742-1979 Sample and proofreading sample inspection HB 735-79 slot milling cutter
HB 4652-1992 Sample and proofreading sample inspection HB 4651-92 slotting milling cutter
HB 5053-1977 Quality inspection of palladium coating (trial implementation)
HB 5054-1977 Rhodium Plating Quality Inspection (Trial)
HB 745-1979 Sample and proofreading sample inspection HB 737-79 1564/111 slot milling cutter

Professional Standard - Machinery, Test duplicates

JB/T 8687-2013 Sampling inspection for pump products
JB/T 3313.3-1999 Plane milling machine Accuracy inspection

Standard Association of Australia （SAA）, Test duplicates

AS 1141:1974 SAMPLING AND TESTING AGGREGATES
AS 2806.5:2003(R2013)
AS 2806.6:2003(R2013)
AS 2891.1.3:2008 Methods of sampling and testing asphalt - Sampling - Asphalt from slabs
AS 4264.5:1999 Coal and coke - Sampling - Guide to the inspection of mechanical sampling systems
AS/NZS 4447:1997 Wool - IWTO Core Test Regulations
AS 4433.6:2000 Guide to the sampling of particulate materials - Inspection of mechanical sampling systems

Malaysia Standards, Test duplicates

MS 1435-1998 Method of sampling and tests for biscuits

Japanese Industrial Standards Committee (JISC), Test duplicates

JIS Z 9001:1980 General rules for sampling inspection procedures
JIS P 8110:2001 Paper and board -- Sampling to determine average quality
JIS M 8709:2006 Iron ores -- Experimental methods for checking the bias of sampling
JIS M 8708:2005 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS K 3836:1995 Testing methods for collection efficiency of airborne microbe samplers
JIS Z 9009:1999 Sequential sampling plans for inspection by attributes
JIS Z 9015-1:2006 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
JIS Z 9008:1957 Sampling inspection plans for continuous production by attributes
JIS Z 9015-1:1999 Sampling procedures for inspection by attributes -- Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

Shanxi Provincial Standard of the People's Republic of China, Test duplicates

DB1404/T 12-2021 Requirements for disposal of samples after inspection by inspection and testing institutions

Group Standards of the People's Republic of China, Test duplicates

T/AHEMA 15-2022 Sample Management Specifications for Inspection and Testing Institutions
T/LZZLXH 061-2021 Specifications for sample management of inspection and testing institutions
T/SHMHZQ 063-2022 Specifications for sample management of inspection and testing institutions
T/ZTCA 006-2022 Inspection and testing cloud service platform service specification
T/CIQA 1-2019 Code of practice for self-discipline in inspection and survey industry
T/ZTCA 007-2022 Equipment interface specification for inspection and testing cloud service platform
T/NMRJ 004-2023 Specification for inspection and testing of flat steel wire ropes for mining balance

Inner Mongolia Provincial Standard of the People's Republic of China, Test duplicates

DB1506/T 12-2020 Specifications for sample management of inspection and testing institutions

Anhui Provincial Standard of the People's Republic of China, Test duplicates

DB3418/T 026-2022 Specifications for the management of sample retention by inspection and testing institutions
DB3418/T 013-2022 Specifications for sample service of motor inspection and testing institutions
DB34/T 4361-2022 Disposal Specifications for Backup Samples Qualified in Food Safety Sampling Inspection

Shandong Provincial Standard of the People's Republic of China, Test duplicates

DB3715/T 27-2022 Specifications for sample management of inspection and testing institutions

Hebei Provincial Standard of the People's Republic of China, Test duplicates

DB1305/T 76-2023 Sample Management Specifications for Inspection and Testing Institutions
DB13/T 329-1997 Rules for inspection of salted oyster mushrooms for export

工业和信息化部, Test duplicates

YB/T 4751-2019 H-shaped steel web flatness inspection ruler

European Committee for Standardization (CEN), Test duplicates

EN 10306:2001 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
EN ISO 15330:1999 Fasteners - Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bearing Surface Method ISO 15330:1999
EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
PD CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuitiestypes in test specimens for examination

Military Standard of the People's Republic of China-General Armament Department, Test duplicates

GJB 9561-2018 Plane optical element surface parallel difference interference detection method Plane fitting method
GJB 524.60-1988 Speedboat (planing boat) mooring and sailing test procedures gyro platform test
GJB 524.59-1988 Procedure for mooring and sailing test of speedboats (planing boats) azimuth level test

YU-JUS, Test duplicates

JUS D.A1.053-1979 Test ofwood. Determination ofultimate shearing stress parallel

Professional Standard - Commodity Inspection, Test duplicates

SN/T 0736.1-1997 Method of inspection for import and export fertilizers.Sampling and sample preparation
SN/T 0816-1999 Rules for the inspection of leveling rulers for export
SN/T 1309.1-2003 Rules for footwear inspection-Rules for samplling
SN/T 0553-1996 Method for the sampling of garments inspection for export
SN/T 0800.1-2016 Inspection of cereals, oils and feedstuffs for import and export.Methods of sampling and preparation of samples
SN/T 0800.1-1999 Inspection of cereals,oils and feedstuffs for import and export-Methods of sampling and preparation of samples
SN/T 2866-2011 Inspection and quarantine procedure for reptiles
SN/T 2500-2010 Rules for inspection of wood products and furniture for import and export-Sampling and sample preparation
SN/T 0376-1995 Method of sampling of inspection in fishery products for export
SN/T 1099-2002 Method for the sampling of fabric inspection for import and export
SN/T 0541.1-1996 Inspecting method for import and export standard rubber.Sampling and test-sample preparation
SN/T 0736.1-2012 Inspection for import and export fertilizers.Part 1:Sampling and sample preparation

Jilin Provincial Standard of the People's Republic of China, Test duplicates

DB22/T 1952-2013 Product quality inspection sampling sample management specification
DB22/T 2492-2016 Code of Conduct for Inspection and Testing Institutions

CL-INN, Test duplicates

Professional Standard - Business, Test duplicates

SB/T 10314-1999 Methods of sampling and rules of test

IN-BIS, Test duplicates

Professional Standard - Agriculture, Test duplicates

GB/T 42959-2023 Sampling for microbiological testing of feed
NY/T 541-2002 Sampling methods for laboratory investigation of animal diseases
ZB B 50001-1985 Sampling method for inspection of export aquatic products
SN/T 0248.1-1993 Regulations for Inspection of Bicycles for Export

Professional Standard - Aerospace, Test duplicates

QJ 2136.3-1991 Specimens for physical and chemical re-examination of metallic materials Specimens for metallographic examination

Liaoning Provincial Standard of the People's Republic of China, Test duplicates

DB21/T 3021-2018 Boiler Furnace Maintenance Platform Inspection Regulations

GOSTR, Test duplicates

GOST R 58185-2018 Sample purchasing for consumer goods testing. Guidelines on diligent practice
GOST 34067-2017 Cork stoppers. Sampling for inspection of dimensional characteristics

PL-PKN, Test duplicates

PN C84039-04-1988 Potassium hydroxide technical Sampling for testing

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Test duplicates

GJB 179A-1996 Counting sampling inspection procedures and tables

Professional Standard - Automobile, Test duplicates

QC/T 581-1999 Automobile rim profile inspection template

Shaanxi Provincial Standard of the People's Republic of China, Test duplicates

DB61/T 1430-2021 Product Quality Inspection Sampling Procedures

国家粮食局, Test duplicates

LS/T 3545-2017 Sample divider for grain and oil machinery inspection

National Metrological Technical Specifications of the People's Republic of China, Test duplicates

JJF 1252-2010 Calibration Specification for Measuring Instrument for Laser Paralleism of Micrometers

国家认证认可监督管理委员会, Test duplicates

RB/T 149-2018 Inspection and Testing E-Commerce Platform Management Guide

Professional Standard - Petroleum, Test duplicates

SY/T 10025-1999 Pre-drilling Inspection Specifications for Drilling Platforms

Jiangsu Provincial Standard of the People's Republic of China, Test duplicates

DB32/T 1510-2015 Lifting work platform inspection rules

Professional Standard - Forestry, Test duplicates

LY/T 1717-2007 Guide for sampling inspection of wood-based panels

Professional Standard - Press and Publication, Test duplicates

CY/T 12-1994 Sampling Rules for Inspection of Printed Books and Periodicals

未注明发布机构, Test duplicates

BS EN ISO 15330:1999(2000) Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
BS ISO 8422:2006(2007) Sequential sampling plans for inspection by attributes
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling

Canadian General Standards Board （CGSB), Test duplicates

CGSB 2.11-94 METH 2-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Laboratory Preparation of Samples

Society of Automotive Engineers (SAE), Test duplicates

SAE ARP8616-2021 Balancing Machine Technology - Proper Use and Performance of Response Checks

SAE - SAE International, Test duplicates

SAE EIA-585-2015 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots (Formerly TechAmerica EIA-585)
SAE EIA-585-1991 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots (Formerly TechAmerica EIA-585)
SAE EIA-584-2015 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process